Remove odebug/owarn

1 files changed, 0 insertions, 5 deletions

diff --git a/noncore/apps/opie-console/widget.cpp b/noncore/apps/opie-console/widget.cpp
index c51983f..4a578be 100644
--- a/noncore/apps/opie-console/widget.cpp
+++ b/noncore/apps/opie-console/widget.cpp
@@ -230,1054 +230,1049 @@ static QChar vt100extended(QChar c)
     case 0x2260 : return 29;
     case 0x00a3 : return 30;
     case 0x00b7 : return 31;
   }
   return c;
 }
 
 static QChar identicalMap(QChar c)
 {
   return c;
 }
 
 void Widget::fontChange(const QFont &)
 {
   QFontMetrics fm(font());
   font_h = fm.height();
   font_w = fm.maxWidth();
   font_a = fm.ascent();
 //printf("font_h: %d\n",font_h);
 //printf("font_w: %d\n",font_w);
 //printf("font_a: %d\n",font_a);
 //printf("charset: %s\n",QFont::encodingName(font().charSet()).ascii());
 //printf("rawname: %s\n",font().rawName().ascii());
   fontMap =
 #if QT_VERSION < 300
   strcmp(QFont::encodingName(font().charSet()).ascii(),"iso10646")
           ? vt100extended
           :
 #endif
   identicalMap;
   propagateSize();
   update();
 }
 
 void Widget::setVTFont(const QFont& f)
 {
   QFrame::setFont(f);
 }
 
 QFont Widget::getVTFont() {
   return font();
 }
 
 void Widget::setFont(const QFont &)
 {
   // ignore font change request if not coming from konsole itself
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                         Constructor / Destructor                          */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 Widget::Widget(QWidget *parent, const char *name) : QFrame(parent,name)
 {
 #ifndef QT_NO_CLIPBOARD
   cb = QApplication::clipboard();
   QObject::connect( (QObject*)cb, SIGNAL(dataChanged()),
                     this, SLOT(onClearSelection()) );
 #endif
 
   scrollbar = new QScrollBar(this);
   scrollbar->setCursor( arrowCursor );
   connect(scrollbar, SIGNAL(valueChanged(int)), this, SLOT(scrollChanged(int)));
 
   Config cfg("Konsole");
   cfg.setGroup("ScrollBar");
   switch( cfg.readNumEntry("Position",2)){
   case 0:
       scrollLoc = SCRNONE;
       break;
   case 1:
       scrollLoc = SCRLEFT;
       break;
   case 2:
       scrollLoc = SCRRIGHT;
       break;
   };
 
   blinkT   = new QTimer(this);
   connect(blinkT, SIGNAL(timeout()), this, SLOT(blinkEvent()));
   // blinking = FALSE;
   blinking = TRUE;
 
   resizing = FALSE;
   actSel   = 0;
   image    = 0;
   lines    = 1;
   columns  = 1;
   font_w   = 1;
   font_h   = 1;
   font_a   = 1;
   word_selection_mode = FALSE;
 
   setMouseMarks(TRUE);
   setVTFont( QFont("fixed") );
   setColorTable(base_color_table); // init color table
 
   qApp->installEventFilter( this ); //FIXME: see below
 //  KCursor::setAutoHideCursor( this, true );
 
   // Init DnD ////////////////////////////////////////////////////////////////
   currentSession = NULL;
 //  setAcceptDrops(true); // attempt
 //  m_drop = new QPopupMenu(this);
 //  m_drop->insertItem( QString("Paste"), 0);
 //  m_drop->insertItem( QString("cd"),    1);
 //  connect(m_drop, SIGNAL(activated(int)), SLOT(drop_menu_activated(int)));
 
   // we need focus so that the auto-hide cursor feature works
   setFocus();
   setFocusPolicy( WheelFocus );
 }
 
 //FIXME: make proper destructor
 // Here's a start (David)
 Widget::~Widget()
 {
   qApp->removeEventFilter( this );
   if (image) free(image);
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                             Display Operations                            */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 /*!
     attributed string draw primitive
 */
 
 void Widget::drawAttrStr(QPainter &paint, QRect rect,
                            QString& str, Character attr, BOOL pm, BOOL clear)
 {
   if (pm && color_table[attr.b].transparent)
   {
     paint.setBackgroundMode( TransparentMode );
     if (clear) erase(rect);
   }
   else
   {
     if (blinking)
       paint.fillRect(rect, color_table[attr.b].color);
     else
     {
       paint.setBackgroundMode( OpaqueMode );
       paint.setBackgroundColor( color_table[attr.b].color );
     }
   }
 
   if (color_table[attr.f].bold)
     paint.setPen(QColor( 0x8F, 0x00, 0x00 ));
   else
     paint.setPen(color_table[attr.f].color);
 
   paint.drawText(rect.x(),rect.y()+font_a, str);
 
   if (attr.r & RE_UNDERLINE)
     paint.drawLine(rect.left(), rect.y()+font_a+1, rect.right(),rect.y()+font_a+1 );
 }
 
 /*!
     The image can only be set completely.
 
     The size of the new image may or may not match the size of the widget.
 */
 
 void Widget::setImage(const Character* const newimg, int lines, int columns)
 { int y,x,len;
   const QPixmap* pm = backgroundPixmap();
   QPainter paint;
   setUpdatesEnabled(FALSE);
   paint.begin( this );
 HCNT("setImage");
 
   QPoint tL  = contentsRect().topLeft();
   int    tLx = tL.x();
   int    tLy = tL.y();
   hasBlinker = FALSE;
 
   int cf  = -1; // undefined
   int cb  = -1; // undefined
   int cr  = -1; // undefined
 
   int lins = QMIN(this->lines,  QMAX(0,lines  ));
   int cols = QMIN(this->columns,QMAX(0,columns));
   QChar *disstrU = new QChar[cols];
 
 //{ static int cnt = 0; printf("setImage %d\n",cnt++); }
   for (y = 0; y < lins; y++)
   {
     const Character*       lcl = &image[y*this->columns];
     const Character* const ext = &newimg[y*columns];
     if (!resizing) // not while resizing, we're expecting a paintEvent
     for (x = 0; x < cols; x++)
     {
       hasBlinker |= (ext[x].r & RE_BLINK);
       if (ext[x] != lcl[x])
       {
         cr = ext[x].r;
         cb = ext[x].b;
         if (ext[x].f != cf) cf = ext[x].f;
         int lln = cols - x;
         disstrU[0] = fontMap(ext[x+0].c);
         for (len = 1; len < lln; len++)
         {
           if (ext[x+len].f != cf || ext[x+len].b != cb || ext[x+len].r != cr ||
               ext[x+len] == lcl[x+len] )
             break;
           disstrU[len] = fontMap(ext[x+len].c);
         }
         QString unistr(disstrU,len);
         drawAttrStr(paint,
                     QRect(blX+tLx+font_w*x,bY+tLy+font_h*y,font_w*len,font_h),
                     unistr, ext[x], pm != NULL, true);
         x += len - 1;
       }
     }
     // finally, make `image' become `newimg'.
     memcpy((void*)lcl,(const void*)ext,cols*sizeof(Character));
   }
   drawFrame( &paint );
   paint.end();
   setUpdatesEnabled(TRUE);
   if ( hasBlinker && !blinkT->isActive()) blinkT->start(1000); // 1000 ms
   if (!hasBlinker &&  blinkT->isActive()) { blinkT->stop(); blinking = FALSE; }
   delete [] disstrU;
 }
 
 // paint Event ////////////////////////////////////////////////////
 
 /*!
     The difference of this routine vs. the `setImage' is,
     that the drawing does not include a difference analysis
     between the old and the new image. Instead, the internal
     image is used and the painting bound by the PaintEvent box.
 */
 
 void Widget::paintEvent( QPaintEvent* pe )
 {
 
 //{ static int cnt = 0; printf("paint %d\n",cnt++); }
   const QPixmap* pm = backgroundPixmap();
   QPainter paint;
   setUpdatesEnabled(FALSE);
   paint.begin( this );
   paint.setBackgroundMode( TransparentMode );
 HCNT("paintEvent");
 
   // Note that the actual widget size can be slightly larger
   // that the image (the size is truncated towards the smaller
   // number of characters in `resizeEvent'. The paint rectangle
   // can thus be larger than the image, but less then the size
   // of one character.
 
   QRect rect = pe->rect().intersect(contentsRect());
 
   QPoint tL  = contentsRect().topLeft();
   int    tLx = tL.x();
   int    tLy = tL.y();
 
   int lux = QMIN(columns-1, QMAX(0,(rect.left()   - tLx - blX ) / font_w));
   int luy = QMIN(lines-1,   QMAX(0,(rect.top()    - tLy - bY  ) / font_h));
   int rlx = QMIN(columns-1, QMAX(0,(rect.right()  - tLx - blX ) / font_w));
   int rly = QMIN(lines-1,   QMAX(0,(rect.bottom() - tLy - bY  ) / font_h));
 
   /*
  printf("paintEvent: %d..%d, %d..%d (%d..%d, %d..%d)\n",lux,rlx,luy,rly,
   rect.left(), rect.right(), rect.top(), rect.bottom());
   */
 
   //  if (pm != NULL && color_table[image->b].transparent)
   //  erase(rect);
   // BL: I have no idea why we need this, and it breaks the refresh.
 
   QChar *disstrU = new QChar[columns];
   for (int y = luy; y <= rly; y++)
   for (int x = lux; x <= rlx; x++)
   {
     int len = 1;
     disstrU[0] = fontMap(image[loc(x,y)].c);
     int cf = image[loc(x,y)].f;
     int cb = image[loc(x,y)].b;
     int cr = image[loc(x,y)].r;
     while (x+len <= rlx &&
            image[loc(x+len,y)].f == cf &&
            image[loc(x+len,y)].b == cb &&
            image[loc(x+len,y)].r == cr )
     {
       disstrU[len] = fontMap(image[loc(x+len,y)].c);
       len += 1;
     }
     QString unistr(disstrU,len);
     drawAttrStr(paint,
                 QRect(blX+tLx+font_w*x,bY+tLy+font_h*y,font_w*len,font_h),
                 unistr, image[loc(x,y)], pm != NULL, false);
     x += len - 1;
   }
   delete [] disstrU;
   drawFrame( &paint );
   paint.end();
   setUpdatesEnabled(TRUE);
 }
 
 void Widget::blinkEvent()
 {
   blinking = !blinking;
   repaint(FALSE);
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                  Resizing                                 */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 void Widget::resizeEvent(QResizeEvent* ev)
 {
 //  printf("resize: %d,%d\n",ev->size().width(),ev->size().height());
   //printf("approx: %d,%d\n",ev->size().width()/font_w,ev->size().height()/font_h);
   //printf("leaves: %d,%d\n",ev->size().width()%font_w,ev->size().height()%font_h);
   //printf("curren: %d,%d\n",width(),height());
 HCNT("resizeEvent");
 
   // see comment in `paintEvent' concerning the rounding.
   //FIXME: could make a routine here; check width(),height()
   assert(ev->size().width() == width());
   assert(ev->size().height() == height());
 
   propagateSize();
 }
 
 void Widget::propagateSize()
 {
   Character* oldimg = image;
   int oldlin = lines;
   int oldcol = columns;
   makeImage();
   // we copy the old image to reduce flicker
   int lins = QMIN(oldlin,lines);
   int cols = QMIN(oldcol,columns);
   if (oldimg)
   {
     for (int lin = 0; lin < lins; lin++)
       memcpy((void*)&image[columns*lin],
              (void*)&oldimg[oldcol*lin],cols*sizeof(Character));
     free(oldimg); //FIXME: try new,delete
   }
   else
     clearImage();
 
   //NOTE: control flows from the back through the chest right into the eye.
   //      `emu' will call back via `setImage'.
 
   resizing = TRUE;
   emit changedImageSizeSignal(lines, columns); // expose resizeEvent
   resizing = FALSE;
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                Scrollbar                                  */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 void Widget::scrollChanged(int)
 {
   emit changedHistoryCursor(scrollbar->value()); //expose
 }
 
 void Widget::setScroll(int cursor, int slines)
 {
   disconnect(scrollbar, SIGNAL(valueChanged(int)), this, SLOT(scrollChanged(int)));
   scrollbar->setRange(0,slines);
   scrollbar->setSteps(1,lines);
   scrollbar->setValue(cursor);
   connect(scrollbar, SIGNAL(valueChanged(int)), this, SLOT(scrollChanged(int)));
 }
 
 void Widget::setScrollbarLocation(int loc)
 {
   if (scrollLoc == loc) return; // quickly
   scrollLoc = loc;
   propagateSize();
   update();
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                   Mouse                                   */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 /*!
     Three different operations can be performed using the mouse, and the
     routines in this section serve all of them:
 
     1) The press/release events are exposed to the application
     2) Marking (press and move left button) and Pasting (press middle button)
     3) The right mouse button is used from the configuration menu
 
     NOTE: During the marking process we attempt to keep the cursor within
     the bounds of the text as being displayed by setting the mouse position
     whenever the mouse has left the text area.
 
     Two reasons to do so:
     1) QT does not allow the `grabMouse' to confine-to the Widget.
        Thus a `XGrapPointer' would have to be used instead.
     2) Even if so, this would not help too much, since the text area
        of the Widget is normally not identical with it's bounds.
 
     The disadvantage of the current handling is, that the mouse can visibly
     leave the bounds of the widget and is then moved back. Because of the
     current construction, and the reasons mentioned above, we cannot do better
     without changing the overall construction.
 */
 
 /*!
 */
 
 void Widget::mousePressEvent(QMouseEvent* ev)
 {
 //printf("press [%d,%d] %d\n",ev->x()/font_w,ev->y()/font_h,ev->button());
   if ( !contentsRect().contains(ev->pos()) ) return;
   QPoint tL  = contentsRect().topLeft();
   int    tLx = tL.x();
   int    tLy = tL.y();
 
   word_selection_mode = FALSE;
 
 //printf("press top left [%d,%d] by=%d\n",tLx,tLy, bY);
   if ( ev->button() == LeftButton)
   {
     QPoint pos = QPoint((ev->x()-tLx-blX)/font_w,(ev->y()-tLy-bY)/font_h);
 
     if ( ev->state() & ControlButton ) preserve_line_breaks = FALSE ;
 
     if (mouse_marks || (ev->state() & ShiftButton))
     {
       emit clearSelectionSignal();
       iPntSel = pntSel = pos;
       actSel = 1; // left mouse button pressed but nothing selected yet.
       grabMouse(   /*crossCursor*/  ); // handle with care!
     }
     else
     {
       emit mouseSignal( 0, pos.x() + 1, pos.y() + 1 ); // left button
     }
   }
   if ( ev->button() == MidButton )
   {
     emitSelection();
   }
   if ( ev->button() == RightButton ) // Configure
   {
     emit configureRequest( this, ev->state()&(ShiftButton|ControlButton), ev->x(), ev->y() );
   }
 }
 
 void Widget::mouseMoveEvent(QMouseEvent* ev)
 {
   // for auto-hiding the cursor, we need mouseTracking
   if (ev->state() == NoButton ) return;
 
   if (actSel == 0) return;
 
  // don't extend selection while pasting
   if (ev->state() & MidButton) return;
 
   //if ( !contentsRect().contains(ev->pos()) ) return;
   QPoint tL  = contentsRect().topLeft();
   int    tLx = tL.x();
   int    tLy = tL.y();
   int    scroll = scrollbar->value();
 
   // we're in the process of moving the mouse with the left button pressed
   // the mouse cursor will kept catched within the bounds of the text in
   // this widget.
 
   // Adjust position within text area bounds. See FIXME above.
   QPoint pos = ev->pos();
   if ( pos.x() < tLx+blX )                  pos.setX( tLx+blX );
   if ( pos.x() > tLx+blX+columns*font_w-1 ) pos.setX( tLx+blX+columns*font_w );
   if ( pos.y() < tLy+bY )                   pos.setY( tLy+bY );
   if ( pos.y() > tLy+bY+lines*font_h-1 )    pos.setY( tLy+bY+lines*font_h-1 );
   // check if we produce a mouse move event by this
   if ( pos != ev->pos() ) cursor().setPos(mapToGlobal(pos));
 
   if ( pos.y() == tLy+bY+lines*font_h-1 )
   {
     scrollbar->setValue(scrollbar->value()+yMouseScroll); // scrollforward
   }
   if ( pos.y() == tLy+bY )
   {
     scrollbar->setValue(scrollbar->value()-yMouseScroll); // scrollback
   }
 
   QPoint here = QPoint((pos.x()-tLx-blX)/font_w,(pos.y()-tLy-bY)/font_h);
   QPoint ohere;
   bool swapping = FALSE;
 
   if ( word_selection_mode )
   {
     // Extend to word boundaries
     int i;
     int selClass;
 
     bool left_not_right = ( here.y() < iPntSel.y() ||
      here.y() == iPntSel.y() && here.x() < iPntSel.x() );
     bool old_left_not_right = ( pntSel.y() < iPntSel.y() ||
      pntSel.y() == iPntSel.y() && pntSel.x() < iPntSel.x() );
     swapping = left_not_right != old_left_not_right;
 
     // Find left (left_not_right ? from here : from start)
     QPoint left = left_not_right ? here : iPntSel;
     i = loc(left.x(),left.y());
     selClass = charClass(image[i].c);
     while ( left.x() > 0 && charClass(image[i-1].c) == selClass )
     { i--; left.rx()--; }
 
     // Find left (left_not_right ? from start : from here)
     QPoint right = left_not_right ? iPntSel : here;
     i = loc(right.x(),right.y());
     selClass = charClass(image[i].c);
     while ( right.x() < columns-1 && charClass(image[i+1].c) == selClass )
     { i++; right.rx()++; }
 
     // Pick which is start (ohere) and which is extension (here)
     if ( left_not_right )
     {
       here = left; ohere = right;
     }
     else
     {
       here = right; ohere = left;
     }
   }
 
   if (here == pntSel && scroll == scrollbar->value()) return; // not moved
 
   if ( word_selection_mode ) {
     if ( actSel < 2 || swapping ) {
       emit beginSelectionSignal( ohere.x(), ohere.y() );
     }
   } else if ( actSel < 2 ) {
     emit beginSelectionSignal( pntSel.x(), pntSel.y() );
   }
 
   actSel = 2; // within selection
   pntSel = here;
   emit extendSelectionSignal( here.x(), here.y() );
 }
 
 void Widget::mouseReleaseEvent(QMouseEvent* ev)
 {
 //printf("release [%d,%d] %d\n",ev->x()/font_w,ev->y()/font_h,ev->button());
   if ( ev->button() == LeftButton)
   {
     if ( actSel > 1 ) emit endSelectionSignal(preserve_line_breaks);
     preserve_line_breaks = TRUE;
     actSel = 0;
 
     //FIXME: emits a release event even if the mouse is
     //       outside the range. The procedure used in `mouseMoveEvent'
     //       applies here, too.
 
     QPoint tL  = contentsRect().topLeft();
     int    tLx = tL.x();
     int    tLy = tL.y();
 
     if (!mouse_marks && !(ev->state() & ShiftButton))
       emit mouseSignal( 3, // release
                         (ev->x()-tLx-blX)/font_w + 1,
                         (ev->y()-tLy-bY)/font_h + 1 );
     releaseMouse();
   }
 }
 
 void Widget::mouseDoubleClickEvent(QMouseEvent* ev)
 {
   if ( ev->button() != LeftButton) return;
 
   QPoint tL  = contentsRect().topLeft();
   int    tLx = tL.x();
   int    tLy = tL.y();
   QPoint pos = QPoint((ev->x()-tLx-blX)/font_w,(ev->y()-tLy-bY)/font_h);
 
   // pass on double click as two clicks.
   if (!mouse_marks && !(ev->state() & ShiftButton))
   {
     emit mouseSignal( 0, pos.x()+1, pos.y()+1 ); // left button
     emit mouseSignal( 3, pos.x()+1, pos.y()+1 ); // release
     emit mouseSignal( 0, pos.x()+1, pos.y()+1 ); // left button
     return;
   }
 
 
   emit clearSelectionSignal();
   QPoint bgnSel = pos;
   QPoint endSel = QPoint((ev->x()-tLx-blX)/font_w,(ev->y()-tLy-bY)/font_h);
   int i = loc(bgnSel.x(),bgnSel.y());
   iPntSel = bgnSel;
 
   word_selection_mode = TRUE;
 
   // find word boundaries...
   int selClass = charClass(image[i].c);
   {
     // set the start...
      int x = bgnSel.x();
      while ( x > 0 && charClass(image[i-1].c) == selClass )
      { i--; x--; }
      bgnSel.setX(x);
      emit beginSelectionSignal( bgnSel.x(), bgnSel.y() );
 
      // set the end...
      i = loc( endSel.x(), endSel.y() );
      x = endSel.x();
      while( x < columns-1 && charClass(image[i+1].c) == selClass )
      { i++; x++ ; }
      endSel.setX(x);
      actSel = 2; // within selection
      emit extendSelectionSignal( endSel.x(), endSel.y() );
      emit endSelectionSignal(preserve_line_breaks);
      preserve_line_breaks = TRUE;
    }
 }
 
 void Widget::focusInEvent( QFocusEvent * )
 {
     
     // do nothing, to prevent repainting
 }
 
 
 void Widget::focusOutEvent( QFocusEvent * )
 {
     // do nothing, to prevent repainting
 }
 
 bool Widget::focusNextPrevChild( bool next )
 {
   if (next)
     return false; // This disables changing the active part in konqueror
                   // when pressing Tab
   return QFrame::focusNextPrevChild( next );
 }
 
 
 int Widget::charClass(char ch) const
 {
     // This might seem like overkill, but imagine if ch was a Unicode
     // character (Qt 2.0 QChar) - it might then be sensible to separate
     // the different language ranges, etc.
 
     if ( isspace(ch) ) return ' ';
 
     static const char *word_characters = ":@-./_~";
     if ( isalnum(ch) || strchr(word_characters, ch) )
     return 'a';
 
     // Everything else is weird
     return 1;
 }
 
 void Widget::setMouseMarks(bool on)
 {
   mouse_marks = on;
   setCursor( mouse_marks ? ibeamCursor : arrowCursor );
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                               Clipboard                                   */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 #undef KeyPress
 
 void Widget::emitSelection()
 // Paste Clipboard by simulating keypress events
 {
 #ifndef QT_NO_CLIPBOARD
   QString text = QApplication::clipboard()->text();
   if ( ! text.isNull() )
   {
     text.replace(QRegExp("\n"), "\r");
     QKeyEvent e(QEvent::KeyPress, 0, -1, 0, text);
     emit keyPressedSignal(&e); // expose as a big fat keypress event
     emit clearSelectionSignal();
   }
 #endif
 }
 
 void Widget::emitText(QString text)
 {
   QKeyEvent e(QEvent::KeyPress, 0, -1, 0, text);
   emit keyPressedSignal(&e); // expose as a big fat keypress event
 }
 
 void Widget::pasteClipboard( )
 {
   emitSelection();
 }
 
 void Widget::setSelection(const QString& t)
 {
 #ifndef QT_NO_CLIPBOARD
   // Disconnect signal while WE set the clipboard
   QObject *cb = QApplication::clipboard();
   QObject::disconnect( cb, SIGNAL(dataChanged()),
                      this, SLOT(onClearSelection()) );
 
   QApplication::clipboard()->setText(t);
 
   QObject::connect( cb, SIGNAL(dataChanged()),
                      this, SLOT(onClearSelection()) );
 #endif
 }
 
 void Widget::onClearSelection()
 {
   emit clearSelectionSignal();
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                Keyboard                                   */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 //FIXME: an `eventFilter' has been installed instead of a `keyPressEvent'
 //       due to a bug in `QT' or the ignorance of the author to prevent
 //       repaint events being emitted to the screen whenever one leaves
 //       or reenters the screen to/from another application.
 //
 //   Troll says one needs to change focusInEvent() and focusOutEvent(),
 //   which would also let you have an in-focus cursor and an out-focus
 //   cursor like xterm does.
 
 // for the auto-hide cursor feature, I added empty focusInEvent() and
 // focusOutEvent() so that update() isn't called.
 // For auto-hide, we need to get keypress-events, but we only get them when
 // we have focus.
 
 void Widget::doScroll(int lines)
 {
   scrollbar->setValue(scrollbar->value()+lines);
 }
 
 bool Widget::eventFilter( QObject *obj, QEvent *e )
 {
     if ( (e->type() == QEvent::Accel ||
           e->type() == QEvent::AccelAvailable ) && qApp->focusWidget() == this )  {
         static_cast<QKeyEvent *>( e )->ignore();
         return true;
     }
     if ( obj != this /* when embedded */ && obj != parent() /* when standalone */ )
         return FALSE; // not us
     if ( e->type() == QEvent::Wheel)  {
         QApplication::sendEvent(scrollbar, e);
     }
 
 #ifdef FAKE_CTRL_AND_ALT
     static bool control = FALSE;
     static bool alt = FALSE;
-//    odebug << " Has a keyboard with no CTRL and ALT keys, but we fake it:" << oendl; 
     bool dele=FALSE;
     if ( e->type() == QEvent::KeyPress || e->type() == QEvent::KeyRelease ) {
         QKeyEvent* ke = (QKeyEvent*)e;
         bool keydown = e->type() == QEvent::KeyPress || ke->isAutoRepeat();
         switch (ke->key()) {
           case Key_F9: // let this be "Control"
               control = keydown;
               e = new QKeyEvent(QEvent::KeyPress, Key_Control, 0, ke->state());
               dele=TRUE;
               break;
           case Key_F13: // let this be "Alt"
               alt = keydown;
               e = new QKeyEvent(QEvent::KeyPress, Key_Alt, 0, ke->state());
               dele=TRUE;
               break;
           default:
               if ( control ) {
                   int a = toupper(ke->ascii())-64;
                   if ( a >= 0 && a < ' ' ) {
                       e = new QKeyEvent(e->type(), ke->key(),
                                         a, ke->state()|ControlButton, QChar(a,0));
                       dele=TRUE;
                   }
               }
               if ( alt ) {
                   e = new QKeyEvent(e->type(), ke->key(),
                                     ke->ascii(), ke->state()|AltButton, ke->text());
                   dele=TRUE;
               }
         }
     }
 #endif
 
     if ( e->type() == QEvent::KeyPress )  {
         QKeyEvent* ke = (QKeyEvent*)e;
         actSel=0; // Key stroke implies a screen update, so Widget won't
           // know where the current selection is.
 
-//     odebug << "key pressed is 0x" << ke->key() << "" << oendl; 
-
         if( ke->state() == ShiftButton && ke->key() == Key_Tab) { //lets hardcode this sucker
-
-//     odebug << "key pressed 2 is 0x" << ke->key() << "" << oendl; 
             emitText("\\"); // expose
         } else
             emit keyPressedSignal(ke); // expose
         ke->accept();
 #ifdef FAKE_CTRL_AND_ALT
         if ( dele ) delete e;
 #endif
         return true;               // stop the event
     }
     if ( e->type() == QEvent::Enter )  {
         QObject::disconnect( (QObject*)cb, SIGNAL(dataChanged()),
                              this, SLOT(onClearSelection()) );
     }
     if ( e->type() == QEvent::Leave )  {
         QObject::connect( (QObject*)cb, SIGNAL(dataChanged()),
                           this, SLOT(onClearSelection()) );
     }
     return QFrame::eventFilter( obj, e );
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                  Frame                                    */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 void Widget::frameChanged()
 {
   propagateSize();
   update();
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                   Sound                                   */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 void Widget::Bell()
 {
   QApplication::beep();
 }
 
 /* ------------------------------------------------------------------------- */
 /*                                                                           */
 /*                                 Auxiluary                                 */
 /*                                                                           */
 /* ------------------------------------------------------------------------- */
 
 void Widget::clearImage()
 // initialize the image
 // for internal use only
 {
   for (int y = 0; y < lines; y++)
   for (int x = 0; x < columns; x++)
   {
     image[loc(x,y)].c = 0xff; //' ';
     image[loc(x,y)].f = 0xff; //DEFAULT_FORE_COLOR;
     image[loc(x,y)].b = 0xff; //DEFAULT_BACK_COLOR;
     image[loc(x,y)].r = 0xff; //DEFAULT_RENDITION;
   }
 }
 
 // Create Image ///////////////////////////////////////////////////////
 
 void Widget::calcGeometry()
 {
   //FIXME: set rimX == rimY == 0 when running in full screen mode.
 
   scrollbar->resize(QApplication::style().scrollBarExtent().width(),
                     contentsRect().height());
   switch(scrollLoc)
   {
     case SCRNONE :
      columns = ( contentsRect().width() - 2 * rimX ) / font_w;
      blX = (contentsRect().width() - (columns*font_w) ) / 2;
      brX = blX;
      scrollbar->hide();
      break;
     case SCRLEFT :
      columns = ( contentsRect().width() - 2 * rimX - scrollbar->width()) / font_w;
      brX = (contentsRect().width() - (columns*font_w) - scrollbar->width() ) / 2;
      blX = brX + scrollbar->width();
      scrollbar->move(contentsRect().topLeft());
      scrollbar->show();
      break;
     case SCRRIGHT:
      columns = ( contentsRect().width()  - 2 * rimX - scrollbar->width()) / font_w;
      blX = (contentsRect().width() - (columns*font_w) - scrollbar->width() ) / 2;
      brX = blX;
      scrollbar->move(contentsRect().topRight() - QPoint(scrollbar->width()-1,0));
      scrollbar->show();
      break;
   }
   //FIXME: support 'rounding' styles
   lines   = ( contentsRect().height() - 2 * rimY  ) / font_h;
   bY = (contentsRect().height() - (lines  *font_h)) / 2;
 }
 
 void Widget::makeImage()
 //FIXME: rename 'calcGeometry?
 {
   calcGeometry();
   image = (Character*) malloc(lines*columns*sizeof(Character));
   clearImage();
 }
 
 // calculate the needed size
 QSize Widget::calcSize(int cols, int lins) const
 {
   int frw = width() - contentsRect().width();
   int frh = height() - contentsRect().height();
   int scw = (scrollLoc==SCRNONE?0:scrollbar->width());
   return QSize( font_w*cols + 2*rimX + frw + scw, font_h*lins + 2*rimY + frh );
 }
 
 QSize Widget::sizeHint() const
 {
    return size();
 }
 
 void Widget::styleChange(QStyle &)
 {
     propagateSize();
 }
 
 #ifndef QT_NO_DRAGANDDROP
 
 /* --------------------------------------------------------------------- */
 /*                                                                       */
 /* Drag & Drop                                                           */
 /*                                                                       */
 /* --------------------------------------------------------------------- */
 
 
 void Widget::dragEnterEvent(QDragEnterEvent* e)
 {
   e->accept(QTextDrag::canDecode(e) ||
       QUriDrag::canDecode(e));
 }
 
 void Widget::dropEvent(QDropEvent* event)
 {
     // The current behaviour when url(s) are dropped is
     // * if there is only ONE url and if it's a LOCAL one, ask for paste or cd
     // * in all other cases, just paste
     //   (for non-local ones, or for a list of URLs, 'cd' is nonsense)
   QStrList strlist;
   int file_count = 0;
   dropText = "";
   bool bPopup = true;
 
   if(QUriDrag::decode(event, strlist)) {
     if (strlist.count()) {
       for(const char* p = strlist.first(); p; p = strlist.next()) {
         if(file_count++ > 0) {
           dropText += " ";
           bPopup = false; // more than one file, don't popup
         }
 
 /*
         KURL url(p);
         if (url.isLocalFile()) {
           dropText += url.path(); // local URL : remove protocol
         }
         else {
           dropText += url.prettyURL();
           bPopup = false; // a non-local file, don't popup
         }
 */
 
       }
 
       if (bPopup)
         // m_drop->popup(pos() + event->pos());
   m_drop->popup(mapToGlobal(event->pos()));
       else
   {
     if (currentSession) {
       //currentSession->getEmulation()->sendString(dropText.local8Bit());
       QByteArray tmp;
       // ibot: this should be pretty wrong...
       // now it sends to the right layer
       currentSession-> emulationLayer()->send( tmp.setRawData( dropText.local8Bit()));
     }
     //    kdDebug() << "Drop:" << dropText.local8Bit() << "\n";
   }
     }
   }
   else if(QTextDrag::decode(event, dropText)) {
 //    kdDebug() << "Drop:" << dropText.local8Bit() << "\n";
     if (currentSession) {
       //currentSession->getEmulation()->sendString(dropText.local8Bit());
       QByteArray tmp;
       currentSession->emulationLayer()->send( tmp.setRawData( dropText.local8Bit()));
     }
     // Paste it
   }
 }
 #endif
 
 
 void Widget::drop_menu_activated(int item)
 {
 #ifndef QT_NO_DRAGANDDROP
   QByteArray tmp;
   switch (item)
   {
     case 0: // paste
       //currentSession->getEmulation()->sendString(dropText.local8Bit());
       currentSession->emulationLayer()->send( tmp.setRawData( dropText.local8Bit()));
  
 //    KWM::activate((Window)this->winId());
       break;
     case 1: // cd ...
       //currentSession->getEmulation()->sendString("cd ");
       tmp.setRawData( "cd " );
       currentSession->emulationLayer()->send( tmp );
       struct stat statbuf;
       if ( ::stat( QFile::encodeName( dropText ), &statbuf ) == 0 )
       {
         if ( !S_ISDIR(statbuf.st_mode) )
         {
 /*
           KURL url;
           url.setPath( dropText );
           dropText = url.directory( true, false ); // remove filename
 */
         }
       }
       dropText.replace(QRegExp(" "), "\\ "); // escape spaces
       QByteArray tmp2;
       tmp.setRawDate( dropText.local8Bit() + "\n" );
       //currentSession->getEmulation()->sendString(dropText.local8Bit());
       //currentSession->getEmulation()->sendString("\n");
       currentSession->emulationLayer()->send( tmp );
 //    KWM::activate((Window)this->winId());
       break;
   }
 #endif
 }