Add the possible defines to the custom- device headers

-storage remove stupid check for custom.h. We gurantee it to be present ( even if it is empty )
-qpeapplication
   -introduce OPIE_NEW_MALLOC This will use malloc and free for new and delete
   -introduce OPIE_HIGH_RES_SMALL_PHY   define this if you've a high resolution but physical smaller display


FIXME:
   some one needs to introduce a C7xx Custom.h or define OPIE_HIGH_RES_SMALL_PHY somewhere in the custom-sharp.h

6 files changed, 19 insertions, 9 deletions

diff --git a/library/custom-ipaq.h b/library/custom-ipaq.h
index a9319fa..8321199 100644
--- a/library/custom-ipaq.h
+++ b/library/custom-ipaq.h
@@ -1,21 +1,24 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 
-#define QPE_NEED_CALIBRATION
\ No newline at end of file
+#define QPE_NEED_CALIBRATION
+#define OPIE_SOUND_FRAGMENT_SHIFT 14
+#define USE_REALTIME_AUDIO_THREAD
+#define OPIE_NEW_MALLOC
diff --git a/library/custom-ramses.h b/library/custom-ramses.h
index 9104931..5a1abe4 100644
--- a/library/custom-ramses.h
+++ b/library/custom-ramses.h
@@ -1,69 +1,72 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 
 #define QPE_NEED_CALIBRATION
 #define QPE_HAVE_TOGGLELIGHT
 #define QPE_STARTMENU
+#define USE_REALTIME_AUDIO_THREAD
+#define OPIE_NEW_MALLOC
+
 
 #include <unistd.h>
 #include <stdio.h>
 #include <signal.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 #define QPE_HAVE_MEMALERTER
 
 #define QPE_MEMALERTER_IMPL \
 static void sig_handler(int sig) \
 { \
     switch (sig) { \
     case SIGHUP: \
   memstate = VeryLow; \
   break; \
     case SIGUSR1: \
   memstate = Normal; \
   break; \
     case SIGUSR2: \
   memstate = Low; \
   break; \
     } \
 } \
 static void initMemalerter() \
 { \
     struct sigaction sa; \
     memset(&sa, '\0', sizeof sa); \
     sa.sa_handler = sig_handler; \
     sa.sa_flags = SA_RESTART; \
     if (sigaction(SIGHUP, &sa, NULL) < 0) { \
   return; \
     } \
     if (sigaction(SIGUSR1, &sa, NULL) < 0) { \
   return; \
     } \
     if (sigaction(SIGUSR2, &sa, NULL) < 0) { \
   return; \
     } \
     FILE *fo = fopen("/proc/sys/vm/freepg_signal_proc", "w"); \
      \
     if (!fo) \
         return; \
     fprintf(fo, "qpe\n"); \
     fclose(fo); \
 }
diff --git a/library/custom-sharp.h b/library/custom-sharp.h
index 3936875..b0e67b8 100644
--- a/library/custom-sharp.h
+++ b/library/custom-sharp.h
@@ -1,98 +1,102 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 
 #define QPE_NEED_CALIBRATION
 #define QPE_OWNAPM
 #define QPE_HAVE_TOGGLELIGHT
 #define QPE_NOCIBAUD
 #define QPE_STARTMENU
+#define OPIE_NEW_MALLOC
+#define USE_REALTIME_AUDIO_THREAD
+#define OPIE_NO_SOUND_PCM_READ_BITS
+
 #include <asm/sharp_apm.h>
 #ifndef APM_IOC_BATTERY_BACK_CHK
 #define APM_IOC_BATTERY_BACK_CHK       _IO(APM_IOC_MAGIC, 32)
 #endif
 #ifndef APM_IOC_BATTERY_MAIN_CHK
 #define APM_IOC_BATTERY_MAIN_CHK       _IO(APM_IOC_MAGIC, 33)
 #endif
 
 #include <unistd.h>
 #include <stdio.h>
 #include <signal.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 
 #include <sys/ioctl.h>
 #include <asm/sharp_char.h>
 
 #define QPE_HAVE_MEMALERTER
 
 #define QPE_MEMALERTER_IMPL \
 static void sig_handler(int sig) \
 { \
     switch (sig) { \
     case SIGHUP: \
   memstate = VeryLow; \
   break; \
     case SIGUSR1: \
   memstate = Normal; \
   break; \
     case SIGUSR2: \
   memstate = Low; \
   break; \
     } \
 } \
 static void initMemalerter() \
 { \
     struct sigaction sa; \
     memset(&sa, '\0', sizeof sa); \
     sa.sa_handler = sig_handler; \
     sa.sa_flags = SA_RESTART; \
     if (sigaction(SIGHUP, &sa, NULL) < 0) { \
   return; \
     } \
     if (sigaction(SIGUSR1, &sa, NULL) < 0) { \
   return; \
     } \
     if (sigaction(SIGUSR2, &sa, NULL) < 0) { \
   return; \
     } \
     FILE *fo = fopen("/proc/sys/vm/freepg_signal_proc", "w"); \
      \
     if (!fo) \
         return; \
     fprintf(fo, "qpe\n"); \
     fclose(fo); \
 }
 
 #define QPE_INITIAL_NUMLOCK_STATE \
 { \
     bool numLock = FALSE; \
     sharp_kbdctl_modifstat  st; \
     int dev = ::open("/dev/sharp_kbdctl", O_RDWR); \
     if( dev >= 0 ) { \
   memset(&st, 0, sizeof(st)); \
   st.which = 3; \
                 int ret = ioctl(dev, SHARP_KBDCTL_GETMODIFSTAT, (char*)&st); \
   if( !ret ) \
       numLock = (bool)st.stat; \
   ::close(dev); \
     } \
     return numLock; \
 }
diff --git a/library/custom-simpad.h b/library/custom-simpad.h
index 3872dfd..c951296 100644
--- a/library/custom-simpad.h
+++ b/library/custom-simpad.h
@@ -1,7 +1,9 @@
 /*
  * GPLv2 only zecke@handhelds.org
     hOlgAr
  */
 
 
-#define QPE_NEED_CALIBRATION
\ No newline at end of file
+#define QPE_NEED_CALIBRATION
+#define OPIE_NEW_MALLOC
+#define USE_REALTIME_AUDIO_THREAD
diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp
index feba8b6..cd1c62e 100644
--- a/library/qpeapplication.cpp
+++ b/library/qpeapplication.cpp
@@ -1,2074 +1,2074 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 */
 #define QTOPIA_INTERNAL_LANGLIST
 #include <stdlib.h>
 #include <unistd.h>
 #include <linux/limits.h> // needed for some toolchains (PATH_MAX)
 #include <qfile.h>
 #include <qqueue.h>
 #ifdef Q_WS_QWS
 #ifndef QT_NO_COP
 #if QT_VERSION <= 231
 #define private public
 #define sendLocally processEvent
 #include "qcopenvelope_qws.h"
 #undef private
 #else
 #include "qcopenvelope_qws.h"
 #endif
 #endif
 #include <qwindowsystem_qws.h>
 #endif
 #include <qtextstream.h>
 #include <qpalette.h>
 #include <qbuffer.h>
 #include <qptrdict.h>
 #include <qregexp.h>
 #include <qdir.h>
 #include <qlabel.h>
 #include <qdialog.h>
 #include <qdragobject.h>
 #include <qtextcodec.h>
 #include <qevent.h>
 #include <qtooltip.h>
 #include <qsignal.h>
 #include <qmainwindow.h>
 #include <qwidgetlist.h>
 #include <qpixmapcache.h>
 
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
 #define QTOPIA_INTERNAL_INITAPP
 #include "qpeapplication.h"
 #include "qpestyle.h"
 #include "styleinterface.h"
 #if QT_VERSION >= 300
 #include <qstylefactory.h>
 #else
 #include <qplatinumstyle.h>
 #include <qwindowsstyle.h>
 #include <qmotifstyle.h>
 #include <qmotifplusstyle.h>
 #include "lightstyle.h"
 
 #include <qpe/qlibrary.h>
 #endif
 #include "global.h"
 #include "resource.h"
 #if QT_VERSION <= 230 && defined(QT_NO_CODECS)
 #include "qutfcodec.h"
 #endif
 #include "config.h"
 #include "network.h"
 #ifdef QWS
 #include "fontmanager.h"
 #endif
 
 #include "alarmserver.h"
 #include "applnk.h"
 #include "qpemenubar.h"
 #include "textcodecinterface.h"
 #include "imagecodecinterface.h"
 
 #include <unistd.h>
 #include <sys/file.h>
 #include <sys/ioctl.h>
 #include <sys/soundcard.h>
 
 #include "qt_override_p.h"
 
 
 class QPEApplicationData
 {
 public:
         QPEApplicationData ( )
                 : presstimer( 0 ), presswidget( 0 ), rightpressed( false ), kbgrabbed( false ),
                   notbusysent( false ), preloaded( false ), forceshow( false ), nomaximize( false ),
                   keep_running( true ), qcopQok( false ), qpe_main_widget( 0 )
 
         {}
 
         int presstimer;
         QWidget* presswidget;
         QPoint presspos;
 
         bool rightpressed : 1;
         bool kbgrabbed    : 1;
         bool notbusysent  : 1;
         bool preloaded    : 1;
         bool forceshow    : 1;
         bool nomaximize   : 1;
         bool keep_running : 1;
         bool qcopQok      : 1;
 
 
         QStringList langs;
         QString appName;
         struct QCopRec
         {
                 QCopRec( const QCString &ch, const QCString &msg,
                          const QByteArray &d ) :
                                 channel( ch ), message( msg ), data( d )
                 { }
 
                 QCString channel;
                 QCString message;
                 QByteArray data;
         };
         QWidget* qpe_main_widget;
         QGuardedPtr<QWidget> lastraised;
         QQueue<QCopRec> qcopq;
         QString styleName;
         QString decorationName;
 
         void enqueueQCop( const QCString &ch, const QCString &msg,
                           const QByteArray &data )
         {
                 qcopq.enqueue( new QCopRec( ch, msg, data ) );
         }
         void sendQCopQ()
         {
             if (!qcopQok )
                 return;
 
                 QCopRec * r;
 
            while((r=qcopq.dequeue())) {
                // remove from queue before sending...
                // event loop can come around again before getting
                // back from sendLocally
 #ifndef QT_NO_COP
                QCopChannel::sendLocally( r->channel, r->message, r->data );
 #endif
 
                delete r;
            }
         }
         static void show_mx(QWidget* mw, bool nomaximize,  const QString & = QString::null )
         {
 
             // ugly hack, remove that later after finding a sane solution
             // Addendum: Only Sharp currently has models with high resolution but (physically) small displays,
             // so this is only useful if QT_QWS_SIMPAD is NOT defined. E.g. SIMpad has 800x600 but has
             // a (physically) large enough display to use the small icons
-#ifndef QT_QWS_SIMPAD
+#if defined(OPIE_HIGH_RES_SMALL_PHY)
             if ( QPEApplication::desktop() ->width() >= 600 && ( mw->inherits("QMainWindow") || mw->isA("QMainWindow") ) )  {
                 ( (  QMainWindow* ) mw )->setUsesBigPixmaps( true );
             }
 #endif
 
                 if ( mw->layout() && mw->inherits("QDialog") ) {
                         QPEApplication::showDialog((QDialog*)mw, nomaximize);
                 }
                 else {
 #ifdef Q_WS_QWS
                         if ( !nomaximize )
                                 mw->showMaximized();
                         else
 #endif
 
                                 mw->show();
                 }
         }
         static bool setWidgetCaptionFromAppName( QWidget* /*mw*/, const QString& /*appName*/, const QString& /*appsPath*/ )
         {
                 /*
                 // This works but disable it for now until it is safe to apply
                 // What is does is scan the .desktop files of all the apps for
                 // the applnk that has the corresponding argv[0] as this program
                 // then it uses the name stored in the .desktop file as the caption
                 // for the main widget. This saves duplicating translations for
                 // the app name in the program and in the .desktop files.
 
                 AppLnkSet apps( appsPath );
 
                 QList<AppLnk> appsList = apps.children();
                 for ( QListIterator<AppLnk> it(appsList); it.current(); ++it ) {
                   if ( (*it)->exec() == appName ) {
                 mw->setCaption( (*it)->name() );
                 return TRUE;
                   }
                 }
                 */
                 return FALSE;
         }
 
 
         void show(QWidget* mw, bool nomax)
         {
                 setWidgetCaptionFromAppName( mw, appName, QPEApplication::qpeDir() + "apps" );
                 nomaximize = nomax;
                 qpe_main_widget = mw;
                 qcopQok = TRUE;
 #ifndef QT_NO_COP
 
                 sendQCopQ();
 #endif
 
                 if ( preloaded ) {
                         if (forceshow)
                                 show_mx(mw, nomax);
                 }
                 else if ( keep_running ) {
                         show_mx(mw, nomax);
                 }
         }
 
         void loadTextCodecs()
         {
                 QString path = QPEApplication::qpeDir() + "/plugins/textcodecs";
                 QDir dir( path, "lib*.so" );
                 QStringList list;
                 if ( dir. exists ( ))
                     list = dir.entryList();
                 QStringList::Iterator it;
                 for ( it = list.begin(); it != list.end(); ++it ) {
                         TextCodecInterface *iface = 0;
                         QLibrary *lib = new QLibrary( path + "/" + *it );
                         if ( lib->queryInterface( IID_QtopiaTextCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
                                 QValueList<int> mibs = iface->mibEnums();
                                 for (QValueList<int>::ConstIterator i = mibs.begin(); i != mibs.end(); ++i) {
                                         (void)iface->createForMib(*i);
                                         // ### it exists now; need to remember if we can delete it
                                 }
                         }
                         else {
                                 lib->unload();
                                 delete lib;
                         }
                 }
         }
 
         void loadImageCodecs()
         {
                 QString path = QPEApplication::qpeDir() + "/plugins/imagecodecs";
                 QDir dir( path, "lib*.so" );
                 QStringList list;
                 if ( dir. exists ( ))
                     list = dir.entryList();
                 QStringList::Iterator it;
                 for ( it = list.begin(); it != list.end(); ++it ) {
                         ImageCodecInterface *iface = 0;
                         QLibrary *lib = new QLibrary( path + "/" + *it );
                         if ( lib->queryInterface( IID_QtopiaImageCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
                                 QStringList formats = iface->keys();
                                 for (QStringList::ConstIterator i = formats.begin(); i != formats.end(); ++i) {
                                         (void)iface->installIOHandler(*i);
                                         // ### it exists now; need to remember if we can delete it
                                 }
                         }
                         else {
                                 lib->unload();
                                 delete lib;
                         }
                 }
         }
 };
 
 class ResourceMimeFactory : public QMimeSourceFactory
 {
 public:
         ResourceMimeFactory() : resImage( 0 )
         {
                 setFilePath( Global::helpPath() );
                 setExtensionType( "html", "text/html;charset=UTF-8" );
         }
         ~ResourceMimeFactory() {
             delete resImage;
         }
 
         const QMimeSource* data( const QString& abs_name ) const
         {
                 const QMimeSource * r = QMimeSourceFactory::data( abs_name );
                 if ( !r ) {
                         int sl = abs_name.length();
                         do {
                                 sl = abs_name.findRev( '/', sl - 1 );
                                 QString name = sl >= 0 ? abs_name.mid( sl + 1 ) : abs_name;
                                 int dot = name.findRev( '.' );
                                 if ( dot >= 0 )
                                         name = name.left( dot );
                                 QImage img = Resource::loadImage( name );
                                 if ( !img.isNull() ) {
                                     delete resImage;
                                     resImage = new QImageDrag( img );
                                     r = resImage;
                                 }
                         }
                         while ( !r && sl > 0 );
                 }
                 return r;
         }
 private:
     mutable QImageDrag *resImage;
 };
 
 static int& hack(int& i)
 {
 #if QT_VERSION <= 230 && defined(QT_NO_CODECS)
     // These should be created, but aren't in Qt 2.3.0
     (void)new QUtf8Codec;
     (void)new QUtf16Codec;
 #endif
     return i;
 }
 
 static int muted = 0;
 static int micMuted = 0;
 
 static void setVolume( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "VolumePercent", 50 );
                                 int fd = 0;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         int vol = muted ? 0 : percent;
                                         // set both channels to same volume
                                         vol |= vol << 8;
                                         ioctl( fd, MIXER_WRITE( 0 ), &vol );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 static void setMic( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "Mic", 50 );
 
                                 int fd = 0;
                                 int mic = micMuted ? 0 : percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 
 static void setBass( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "BassPercent", 50 );
 
                                 int fd = 0;
                                 int bass = percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_BASS ), &bass );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 
 static void setTreble( int t = 0, int percent = -1 )
 {
         switch ( t ) {
                 case 0: {
                                 Config cfg( "qpe" );
                                 cfg.setGroup( "Volume" );
                                 if ( percent < 0 )
                                         percent = cfg.readNumEntry( "TreblePercent", 50 );
 
                                 int fd = 0;
                                 int treble = percent;
                                 if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
                                         ioctl( fd, MIXER_WRITE( SOUND_MIXER_TREBLE ), &treble );
                                         ::close( fd );
                                 }
                         }
                         break;
         }
 }
 
 
 /*!
   \class QPEApplication qpeapplication.h
   \brief The QPEApplication class implements various system services
     that are available to all Qtopia applications.
 
   Simply by using QPEApplication instead of QApplication, a standard Qt
   application becomes a Qtopia application. It automatically follows
   style changes, quits and raises, and in the
   case of \link docwidget.html document-oriented\endlink applications,
   changes the currently displayed document in response to the environment.
 
   To create a \link docwidget.html document-oriented\endlink
   application use showMainDocumentWidget(); to create a
   non-document-oriented application use showMainWidget(). The
   keepRunning() function indicates whether the application will
   continue running after it's processed the last \link qcop.html
   QCop\endlink message. This can be changed using setKeepRunning().
 
   A variety of signals are emitted when certain events occur, for
   example, timeChanged(), clockChanged(), weekChanged(),
   dateFormatChanged() and volumeChanged(). If the application receives
   a \link qcop.html QCop\endlink message on the application's
   QPE/Application/\e{appname} channel, the appMessage() signal is
   emitted. There are also flush() and reload() signals, which
   are emitted when synching begins and ends respectively - upon these
   signals, the application should save and reload any data
   files that are involved in synching. Most of these signals will initially
   be received and unfiltered through the appMessage() signal.
 
   This class also provides a set of useful static functions. The
   qpeDir() and documentDir() functions return the respective paths.
   The grabKeyboard() and ungrabKeyboard() functions are used to
   control whether the application takes control of the device's
   physical buttons (e.g. application launch keys). The stylus' mode of
   operation is set with setStylusOperation() and retrieved with
   stylusOperation(). There are also setInputMethodHint() and
   inputMethodHint() functions.
 
   \ingroup qtopiaemb
 */
 
 /*!
   \fn void QPEApplication::clientMoused()
 
   \internal
 */
 
 /*!
   \fn void QPEApplication::timeChanged();
   This signal is emitted when the time changes outside the normal
   passage of time, i.e. if the time is set backwards or forwards.
 */
 
 /*!
   \fn void QPEApplication::clockChanged( bool ampm );
 
   This signal is emitted when the user changes the clock's style. If
   \a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise,
   they want a 24-hour clock.
 */
 
 /*!
     \fn void QPEApplication::volumeChanged( bool muted )
 
     This signal is emitted whenever the mute state is changed. If \a
     muted is TRUE, then sound output has been muted.
 */
 
 /*!
     \fn void QPEApplication::weekChanged( bool startOnMonday )
 
     This signal is emitted if the week start day is changed. If \a
     startOnMonday is TRUE then the first day of the week is Monday; if
     \a startOnMonday is FALSE then the first day of the week is
     Sunday.
 */
 
 /*!
     \fn void QPEApplication::dateFormatChanged(DateFormat)
 
     This signal is emitted whenever the date format is changed.
 */
 
 /*!
     \fn void QPEApplication::flush()
 
     ###
 */
 
 /*!
   \fn void QPEApplication::reload()
 
 */
 
 
 
 void QPEApplication::processQCopFile()
 {
     QString qcopfn("/tmp/qcop-msg-");
     qcopfn += d->appName; // append command name
 
     QFile f(qcopfn);
     if ( f.open(IO_ReadWrite) ) {
 #ifndef Q_OS_WIN32
         flock(f.handle(), LOCK_EX);
 #endif
         QDataStream ds(&f);
         QCString channel, message;
         QByteArray data;
         while(!ds.atEnd()) {
             ds >> channel >> message >> data;
             d->enqueueQCop(channel,message,data);
         }
         ::ftruncate(f.handle(), 0);
 #ifndef Q_OS_WIN32
         f.flush();
         flock(f.handle(), LOCK_UN);
 #endif
     }
 #endif
 }
 
 
 /*!
   \fn void QPEApplication::appMessage( const QCString& msg, const QByteArray& data )
 
   This signal is emitted when a message is received on this
   application's QPE/Application/<i>appname</i> \link qcop.html
   QCop\endlink channel.
 
   The slot to which you connect this signal uses \a msg and \a data
   in the following way:
 
 \code
      void MyWidget::receive( const QCString& msg, const QByteArray& data )
      {
        QDataStream stream( data, IO_ReadOnly );
        if ( msg == "someMessage(int,int,int)" ) {
             int a,b,c;
             stream >> a >> b >> c;
             ...
        } else if ( msg == "otherMessage(QString)" ) {
            ...
        }
     }
 \endcode
 
   \sa qcop.html
   Note that messages received here may be processed by qpe application
   and emitted as signals, such as flush() and reload().
 */
 
 /*!
   Constructs a QPEApplication just as you would construct
   a QApplication, passing \a argc, \a argv, and \a t.
 
   For applications, \a t should be the default, GuiClient. Only
   the Qtopia server passes GuiServer.
 */
 QPEApplication::QPEApplication( int & argc, char **argv, Type t )
                 : QApplication( hack(argc), argv, t ), pidChannel( 0 )
 {
         QPixmapCache::setCacheLimit(256); // sensible default for smaller devices.
 
         d = new QPEApplicationData;
         d->loadTextCodecs();
         d->loadImageCodecs();
                int dw = desktop() ->width();
 
         if ( dw < 200 ) {
                 setFont( QFont( "vera", 8 ) );
                 AppLnk::setSmallIconSize( 10 );
                 AppLnk::setBigIconSize( 28 );
         }
-#ifndef QT_QWS_SIMPAD
+#ifndef OPIE_HIGH_RES_SMALL_PHY
         else if ( dw > 600 ) {
-                               setFont( QFont( "vera", 16 ) );
-                                AppLnk::setSmallIconSize( 24 );
+                setFont( QFont( "vera", 16 ) );
+                AppLnk::setSmallIconSize( 24 );
                 AppLnk::setBigIconSize( 48 );
         }
 #endif
         else if ( dw > 200 ) {
                 setFont( QFont( "vera", 10 ) );
                 AppLnk::setSmallIconSize( 14 );
                 AppLnk::setBigIconSize( 32 );
         }
 
         QMimeSourceFactory::setDefaultFactory( new ResourceMimeFactory );
 
         connect( this, SIGNAL( lastWindowClosed() ), this, SLOT( hideOrQuit() ) );
 
 
         sysChannel = new QCopChannel( "QPE/System", this );
         connect( sysChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
                  this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
 
 /* COde now in initapp */
 #if 0
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
 
         QString qcopfn( "/tmp/qcop-msg-" );
         qcopfn += QString( argv[ 0 ] ); // append command name
 
         QFile f( qcopfn );
         if ( f.open( IO_ReadOnly ) ) {
                 flock( f.handle(), LOCK_EX );
         }
 
 
 
         QCString channel = QCString( argv[ 0 ] );
         channel.replace( QRegExp( ".*/" ), "" );
         d->appName = channel;
         channel = "QPE/Application/" + channel;
         pidChannel = new QCopChannel( channel, this );
         connect( pidChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
                  this, SLOT( pidMessage( const QCString &, const QByteArray & ) ) );
 
         if ( f.isOpen() ) {
                 d->keep_running = FALSE;
                 QDataStream ds( &f );
                 QCString channel, message;
                 QByteArray data;
                 while ( !ds.atEnd() ) {
                         ds >> channel >> message >> data;
                         d->enqueueQCop( channel, message, data );
                 }
 
                 flock( f.handle(), LOCK_UN );
                 f.close();
                 f.remove();
         }
 
         for ( int a = 0; a < argc; a++ ) {
                 if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) {
                         argv[ a ] = argv[ a + 1 ];
                         a++;
                         d->preloaded = TRUE;
                         argc -= 1;
                 }
                 else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) {
                         argv[ a ] = argv[ a + 1 ];
                         a++;
                         d->preloaded = TRUE;
                         d->forceshow = TRUE;
                         argc -= 1;
                 }
         }
 
         /* overide stored arguments */
         setArgs( argc, argv );
 
 #endif
 #else
         initApp( argc, argv );
 #endif
         //  qwsSetDecoration( new QPEDecoration() );
 
 #ifndef QT_NO_TRANSLATION
 
         d->langs = Global::languageList();
         for ( QStringList::ConstIterator it = d->langs.begin(); it != d->langs.end(); ++it ) {
                 QString lang = *it;
 
                 installTranslation( lang + "/libopie.qm");
                 installTranslation( lang + "/libqpe.qm" );
                 installTranslation( lang + "/" + d->appName + ".qm" );
 
 
                 //###language/font hack; should look it up somewhere
 #ifdef QWS
 
                 if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) {
                     QFont fn = FontManager::unicodeFont( FontManager::Proportional );
                     setFont( fn );
                 }
 #endif
         }
 #endif
 
         applyStyle();
 
         if ( type() == GuiServer ) {
                 setVolume();
         }
 
         installEventFilter( this );
 
         QPEMenuToolFocusManager::initialize();
 
 #ifdef QT_NO_QWS_CURSOR
         // if we have no cursor, probably don't want tooltips
         QToolTip::setEnabled( FALSE );
 #endif
 }
 
 
 #ifdef QTOPIA_INTERNAL_INITAPP
 void QPEApplication::initApp( int argc, char **argv )
 {
     bool initial = pidChannel; // was set to 0 in the initializer
     delete pidChannel;
     d->keep_running = TRUE;
     d->preloaded = FALSE;
     d->forceshow = FALSE;
 
     QCString channel = QCString(argv[0]);
 
     channel.replace(QRegExp(".*/"),"");
     d->appName = channel;
 
     #if QT_VERSION > 235
     qt_fbdpy->setIdentity( channel ); // In Qt/E 2.3.6
     #endif
 
     channel = "QPE/Application/" + channel;
     pidChannel = new QCopChannel( channel, this);
     connect( pidChannel, SIGNAL(received(const QCString &, const QByteArray &)),
             this, SLOT(pidMessage(const QCString &, const QByteArray &)));
 
     if (!initial) {
         processQCopFile();
         d->keep_running = d->qcopq.isEmpty();
     }
 
     for (int a=0; a<argc; a++) {
         if ( qstrcmp(argv[a],"-preload")==0 ) {
             argv[a] = argv[a+1];
             a++;
             d->preloaded = TRUE;
             argc-=1;
         } else if ( qstrcmp(argv[a],"-preload-show")==0 ) {
             argv[a] = argv[a+1];
             a++;
             d->preloaded = TRUE;
             d->forceshow = TRUE;
             argc-=1;
         }
     }
 
     /* overide stored arguments */
     setArgs(argc, argv);
 
     /* install translation here */
     for ( QStringList::ConstIterator it = d->langs.begin(); it != d->langs.end(); ++it )
         installTranslation( (*it) + "/" + d->appName + ".qm" );
 }
 #endif
 
 
 static QPtrDict<void>* inputMethodDict = 0;
 static void createInputMethodDict()
 {
         if ( !inputMethodDict )
                 inputMethodDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the currently set hint to the system as to whether
   widget \a w has any use for text input methods.
 
 
   \sa setInputMethodHint() InputMethodHint
 */
 QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w )
 {
         if ( inputMethodDict && w )
                 return ( InputMethodHint ) ( int ) inputMethodDict->find( w );
         return Normal;
 }
 
 /*!
   \enum QPEApplication::InputMethodHint
 
   \value Normal the application sometimes needs text input (the default).
   \value AlwaysOff the application never needs text input.
   \value AlwaysOn the application always needs text input.
 */
 
 /*!
   Hints to the system that widget \a w has use for text input methods
   as specified by \a mode.
 
   \sa inputMethodHint() InputMethodHint
 */
 void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode )
 {
         createInputMethodDict();
         if ( mode == Normal ) {
                 inputMethodDict->remove
                 ( w );
         }
         else {
                 inputMethodDict->insert( w, ( void* ) mode );
         }
 }
 
 class HackDialog : public QDialog
 {
 public:
         void acceptIt()
         {
                 accept();
         }
         void rejectIt()
         {
                 reject();
         }
 };
 
 
 void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key )
 {
         // specialised actions for certain widgets. May want to
         // add more stuff here.
         if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" )
                 && activePopupWidget() ->parentWidget()
                 && activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) )
                 key = Qt::Key_Return;
 
         if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) )
                 key = Qt::Key_Return;
 
 #ifdef QWS
 
         ke->simpleData.keycode = key;
 #endif
 }
 
 class HackWidget : public QWidget
 {
 public:
         bool needsOk()
         {
                 return ( getWState() & WState_Reserved1 );
         }
 };
 
 /*!
   \internal
 */
 
 #ifdef QWS
 bool QPEApplication::qwsEventFilter( QWSEvent * e )
 {
         if ( !d->notbusysent && e->type == QWSEvent::Focus ) {
                 if ( qApp->type() != QApplication::GuiServer ) {
                         QCopEnvelope e( "QPE/System", "notBusy(QString)" );
                         e << d->appName;
                 }
                 d->notbusysent = TRUE;
         }
         if ( type() == GuiServer ) {
                 switch ( e->type ) {
                         case QWSEvent::Mouse:
                                 if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) )
                                         emit clientMoused();
                                 break;
                         default:
                                 break;
                 }
         }
         if ( e->type == QWSEvent::Key ) {
                 QWSKeyEvent *ke = ( QWSKeyEvent * ) e;
                 if ( ke->simpleData.keycode == Qt::Key_F33 ) {
                         // Use special "OK" key to press "OK" on top level widgets
                         QWidget * active = activeWindow();
                         QWidget *popup = 0;
                         if ( active && active->isPopup() ) {
                                 popup = active;
                                 active = active->parentWidget();
                         }
                         if ( active && ( int ) active->winId() == ke->simpleData.window &&
                                 !active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) {
                                 if ( ke->simpleData.is_press ) {
                                         if ( popup )
                                                 popup->close();
                                         if ( active->inherits( "QDialog" ) ) {
                                                 HackDialog * d = ( HackDialog * ) active;
                                                 d->acceptIt();
                                                 return TRUE;
                                         }
                                         else if ( ( ( HackWidget * ) active ) ->needsOk() ) {
                                                 QSignal s;
                                                 s.connect( active, SLOT( accept() ) );
                                                 s.activate();
                                         }
                                         else {
                                                 // do the same as with the select key: Map to the default action of the widget:
                                                 mapToDefaultAction( ke, Qt::Key_Return );
                                         }
                                 }
                         }
                 }
                 else if ( ke->simpleData.keycode == Qt::Key_F30 ) {
                         // Use special "select" key to do whatever default action a widget has
                         mapToDefaultAction( ke, Qt::Key_Space );
                 }
                 else if ( ke->simpleData.keycode == Qt::Key_Escape &&
                           ke->simpleData.is_press ) {
                         // Escape key closes app if focus on toplevel
                         QWidget * active = activeWindow();
                         if ( active && active->testWFlags( WType_TopLevel ) &&
                                 ( int ) active->winId() == ke->simpleData.window &&
                                 !active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) {
                                 if ( active->inherits( "QDialog" ) ) {
                                         HackDialog * d = ( HackDialog * ) active;
                                         d->rejectIt();
                                         return TRUE;
                                 }
                                 else if ( strcmp( argv() [ 0 ], "embeddedkonsole" ) != 0 ) {
                                         active->close();
                                 }
                         }
                 }
                 else if ( ke->simpleData.keycode >= Qt::Key_F1 && ke->simpleData.keycode <= Qt::Key_F29 ) {
                         // this should be if ( ODevice::inst ( )-> buttonForKeycode ( ... ))
                         // but we cannot access libopie function within libqpe :(
 
                         QWidget * active = activeWindow ( );
                         if ( active && ((int) active-> winId ( ) == ke-> simpleData.window )) {
                                 if ( d-> kbgrabbed ) { // we grabbed the keyboard
                                         QChar ch ( ke-> simpleData.unicode );
                                         QKeyEvent qke ( ke-> simpleData. is_press ? QEvent::KeyPress : QEvent::KeyRelease,
                                                         ke-> simpleData.keycode,
                                                         ch. latin1 ( ),
                                                         ke-> simpleData.modifiers,
                                                         QString ( ch ),
                                                         ke-> simpleData.is_auto_repeat, 1 );
 
                                         QObject *which = QWidget::keyboardGrabber ( );
                                         if ( !which )
                                                 which = QApplication::focusWidget ( );
                                         if ( !which )
                                                 which = QApplication::activeWindow ( );
                                         if ( !which )
                                                 which = qApp;
 
                                         QApplication::sendEvent ( which, &qke );
                                 }
                                 else { // we didn't grab the keyboard, so send the event to the launcher
                                         QCopEnvelope e ( "QPE/Launcher", "deviceButton(int,int,int)" );
                                         e << int( ke-> simpleData.keycode ) << int( ke-> simpleData. is_press ) << int( ke-> simpleData.is_auto_repeat );
                                 }
                         }
                         return true;
                 }
         }
         if ( e->type == QWSEvent::Focus ) {
                 QWSFocusEvent * fe = ( QWSFocusEvent* ) e;
                 if ( !fe->simpleData.get_focus ) {
                         QWidget * active = activeWindow();
                         while ( active && active->isPopup() ) {
                                 active->close();
                                 active = activeWindow();
                         }
                 }
                 else {
                         // make sure our modal widget is ALWAYS on top
                         QWidget *topm = activeModalWidget();
                         if ( topm ) {
                                 topm->raise();
                         }
                 }
                 if ( fe->simpleData.get_focus && inputMethodDict ) {
                         InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) );
                         if ( m == AlwaysOff )
                                 Global::hideInputMethod();
                         if ( m == AlwaysOn )
                                 Global::showInputMethod();
                 }
         }
 
 
         return QApplication::qwsEventFilter( e );
 }
 #endif
 
 /*!
   Destroys the QPEApplication.
 */
 QPEApplication::~QPEApplication()
 {
         ungrabKeyboard();
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
         // Need to delete QCopChannels early, since the display will
         // be gone by the time we get to ~QObject().
         delete sysChannel;
         delete pidChannel;
 #endif
 
         delete d;
 }
 
 /*!
   Returns <tt>$OPIEDIR/</tt>.
 */
 QString QPEApplication::qpeDir()
 {
         const char * base = getenv( "OPIEDIR" );
         if ( base )
                 return QString( base ) + "/";
 
         return QString( "../" );
 }
 
 /*!
   Returns the user's current Document directory. There is a trailing "/".
   .. well, it does now,, and there's no trailing '/'
 */
 QString QPEApplication::documentDir()
 {
         const char* base = getenv( "HOME");
         if ( base )
                 return QString( base ) + "/Documents";
 
         return QString( "../Documents" );
 }
 
 static int deforient = -1;
 
 /*!
   \internal
 */
 int QPEApplication::defaultRotation()
 {
         if ( deforient < 0 ) {
                 QString d = getenv( "QWS_DISPLAY" );
                 if ( d.contains( "Rot90" ) ) {
                         deforient = 90;
                 }
                 else if ( d.contains( "Rot180" ) ) {
                         deforient = 180;
                 }
                 else if ( d.contains( "Rot270" ) ) {
                         deforient = 270;
                 }
                 else {
                         deforient = 0;
                 }
         }
         return deforient;
 }
 
 /*!
   \internal
 */
 void QPEApplication::setDefaultRotation( int r )
 {
         if ( qApp->type() == GuiServer ) {
                 deforient = r;
                 setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 );
                 Config config("qpe");
                 config.setGroup( "Rotation" );
                 config.writeEntry( "Rot", r );
         }
         else {
 #ifndef QT_NO_COP
                 { QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" );
                         e << r;
                 }
 #endif
 
         }
 }
 
 #include <qgfx_qws.h>
 #include <qwindowsystem_qws.h>
 #include <qpixmapcache.h>
 
 extern void qws_clearLoadedFonts();
 
 void QPEApplication::setCurrentMode( int x, int y, int depth )
 {
     // Reset the caches
     qws_clearLoadedFonts();
     QPixmapCache::clear();
 
     // Change the screen mode
     qt_screen->setMode(x, y, depth);
 
     if ( qApp->type() == GuiServer ) {
         // Reconfigure the GuiServer
         qwsServer->beginDisplayReconfigure();
         qwsServer->endDisplayReconfigure();
 
         // Get all the running apps to reset
         QCopEnvelope env( "QPE/System", "reset()" );
     }
 }
 
 void QPEApplication::reset() {
     // Reconnect to the screen
     qt_screen->disconnect();
     qt_screen->connect( QString::null );
 
     // Redraw everything
     applyStyle();
 }
 
 /*!
   \internal
 */
 void QPEApplication::applyStyle()
 {
         Config config( "qpe" );
         config.setGroup( "Appearance" );
 
 #if QT_VERSION > 233
 #if !defined(OPIE_NO_OVERRIDE_QT)
         // don't block ourselves ...
         Opie::force_appearance = 0;
 
         static QString appname = Opie::binaryName ( );
 
         QStringList ex = config. readListEntry ( "NoStyle", ';' );
         int nostyle = 0;
         for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) {
                 if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) {
                         nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 );
                         break;
                 }
         }
 #else
         int nostyle = 0;
 #endif
 
         // Widget style
         QString style = config.readEntry( "Style", "FlatStyle" );
 
         // don't set a custom style
         if ( nostyle & Opie::Force_Style )
                 style = "FlatStyle";
 
         internalSetStyle ( style );
 
         // Colors - from /etc/colors/Liquid.scheme
         QColor bgcolor( config.readEntry( "Background", "#E0E0E0" ) );
         QColor btncolor( config.readEntry( "Button", "#96c8fa" ) );
         QPalette pal( btncolor, bgcolor );
         QString color = config.readEntry( "Highlight", "#73adef" );
         pal.setColor( QColorGroup::Highlight, QColor( color ) );
         color = config.readEntry( "HighlightedText", "#FFFFFF" );
         pal.setColor( QColorGroup::HighlightedText, QColor( color ) );
         color = config.readEntry( "Text", "#000000" );
         pal.setColor( QColorGroup::Text, QColor( color ) );
         color = config.readEntry( "ButtonText", "#000000" );
         pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) );
         color = config.readEntry( "Base", "#FFFFFF" );
         pal.setColor( QColorGroup::Base, QColor( color ) );
 
         pal.setColor( QPalette::Disabled, QColorGroup::Text,
                       pal.color( QPalette::Active, QColorGroup::Background ).dark() );
 
         setPalette( pal, TRUE );
 
         // Window Decoration
         QString dec = config.readEntry( "Decoration", "Flat" );
 
         // don't set a custom deco
         if ( nostyle & Opie::Force_Decoration )
                 dec = "";
 
         //qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle);
 
         if ( dec != d->decorationName ) {
                 qwsSetDecoration( new QPEDecoration( dec ) );
                 d->decorationName = dec;
         }
 
         // Font
         QString ff = config.readEntry( "FontFamily", font().family() );
         int fs = config.readNumEntry( "FontSize", font().pointSize() );
 
         // don't set a custom font
         if ( nostyle & Opie::Force_Font ) {
                 ff = "Vera";
                 fs = 10;
         }
 
         setFont ( QFont ( ff, fs ), true );
 
 #if !defined(OPIE_NO_OVERRIDE_QT)
         // revert to global blocking policy ...
         Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None;
         Opie::force_appearance &= ~nostyle;
 #endif
 #endif
 }
 
 void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data )
 {
 #ifdef Q_WS_QWS
         QDataStream stream( data, IO_ReadOnly );
         if ( msg == "applyStyle()" ) {
                 applyStyle();
         }
         else if ( msg == "toggleApplicationMenu()" ) {
                 QWidget *active = activeWindow ( );
 
                 if ( active ) {
                         QPEMenuToolFocusManager *man = QPEMenuToolFocusManager::manager ( );
                         bool oldactive = man-> isActive ( );
 
                         man-> setActive( !man-> isActive() );
 
                         if ( !oldactive && !man-> isActive ( )) { // no menubar to toggle -> try O-Menu
                                 QCopEnvelope e ( "QPE/TaskBar", "toggleStartMenu()" );
                         }
                 }
         }
         else if ( msg == "setDefaultRotation(int)" ) {
                 if ( type() == GuiServer ) {
                         int r;
                         stream >> r;
                         setDefaultRotation( r );
                 }
         }
         else if ( msg == "setCurrentMode(int,int,int)" ) { // Added: 2003-06-11 by Tim Ansell <mithro@mithis.net>
             if ( type() == GuiServer ) {
                 int x, y, depth;
                 stream >> x;
                 stream >> y;
                 stream >> depth;
                 setCurrentMode( x, y, depth );
             }
          }
         else if ( msg == "reset()" ) {
             if ( type() != GuiServer )
                 reset();
         }
         else if ( msg == "setCurrentRotation(int)" ) {
                 int r;
                 stream >> r;
                 setCurrentRotation( r );
          }
         else if ( msg == "shutdown()" ) {
                 if ( type() == GuiServer )
                         shutdown();
         }
         else if ( msg == "quit()" ) {
                 if ( type() != GuiServer )
                         tryQuit();
         }
         else if ( msg == "forceQuit()" ) {
                 if ( type() != GuiServer )
                         quit();
         }
         else if ( msg == "restart()" ) {
                 if ( type() == GuiServer )
                         restart();
         }
         else if ( msg == "language(QString)" ) {
                 if ( type() == GuiServer ) {
                         QString l;
                         stream >> l;
                         QString cl = getenv( "LANG" );
                         if ( cl != l ) {
                                 if ( l.isNull() )
                                         unsetenv( "LANG" );
                                 else
                                         setenv( "LANG", l.latin1(), 1 );
                                 restart();
                         }
                 }
         }
         else if ( msg == "timeChange(QString)" ) {
                 QString t;
                 stream >> t;
                 if ( t.isNull() )
                         unsetenv( "TZ" );
                 else
                         setenv( "TZ", t.latin1(), 1 );
                 // emit the signal so everyone else knows...
                 emit timeChanged();
         }
         else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) {
                 if ( type() == GuiServer ) {
                         QDateTime when;
                         QCString channel, message;
                         int data;
                         stream >> when >> channel >> message >> data;
                         AlarmServer::addAlarm( when, channel, message, data );
                 }
         }
         else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) {
                 if ( type() == GuiServer ) {
                         QDateTime when;
                         QCString channel, message;
                         int data;
                         stream >> when >> channel >> message >> data;
                         AlarmServer::deleteAlarm( when, channel, message, data );
                 }
         }
         else if ( msg == "clockChange(bool)" ) {
                 int tmp;
                 stream >> tmp;
                 emit clockChanged( tmp );
         }
         else if ( msg == "weekChange(bool)" ) {
                 int tmp;
                 stream >> tmp;
                 emit weekChanged( tmp );
         }
         else if ( msg == "setDateFormat(DateFormat)" ) {
                 DateFormat tmp;
                 stream >> tmp;
                 emit dateFormatChanged( tmp );
         }
         else if ( msg == "setVolume(int,int)" ) {
                 int t, v;
                 stream >> t >> v;
                 setVolume( t, v );
                 emit volumeChanged( muted );
         }
         else if ( msg == "volumeChange(bool)" ) {
                 stream >> muted;
                 setVolume();
                 emit volumeChanged( muted );
         }
         else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
                 int t, v;
                 stream >> t >> v;
                 setMic( t, v );
                 emit micChanged( micMuted );
         }
         else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
                 stream >> micMuted;
                 setMic();
                 emit micChanged( micMuted );
         }
         else if ( msg == "setBass(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 int t, v;
                 stream >> t >> v;
                 setBass( t, v );
         }
         else if ( msg == "bassChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 setBass();
         }
             else if ( msg == "setTreble(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 int t, v;
                 stream >> t >> v;
                 setTreble( t, v );
         }
         else if ( msg == "trebleChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 setTreble();
         } else if ( msg == "getMarkedText()" ) {
         if ( type() == GuiServer ) {
             const ushort unicode = 'C'-'@';
             const int scan = Key_C;
             qwsServer->processKeyEvent( unicode, scan, ControlButton, TRUE, FALSE );
             qwsServer->processKeyEvent( unicode, scan, ControlButton, FALSE, FALSE );
         }
     } else if ( msg == "newChannel(QString)") {
         QString myChannel = "QPE/Application/" + d->appName;
         QString channel;
         stream >> channel;
         if (channel == myChannel) {
             processQCopFile();
             d->sendQCopQ();
         }
     }
 
 
 #endif
 }
 
 
 
 
 
 /*!
   \internal
 */
 bool QPEApplication::raiseAppropriateWindow()
 {
     bool r=FALSE;
 
     // 1. Raise the main widget
     QWidget *top = d->qpe_main_widget;
     if ( !top ) top = mainWidget();
 
     if ( top && d->keep_running ) {
         if ( top->isVisible() )
             r = TRUE;
         else if (d->preloaded) {
             // We are preloaded and not visible.. pretend we just started..
 #ifndef QT_NO_COP
             QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
             e << d->appName;
 #endif
         }
 
         d->show_mx(top,d->nomaximize, d->appName);
         top->raise();
     }
 
     QWidget *topm = activeModalWidget();
 
     // 2. Raise any parentless widgets (except top and topm, as they
     //     are raised before and after this loop).  Order from most
     //     recently raised as deepest to least recently as top, so
     //     that repeated calls cycle through widgets.
     QWidgetList *list = topLevelWidgets();
     if ( list ) {
         bool foundlast = FALSE;
         QWidget* topsub = 0;
         if ( d->lastraised ) {
             for (QWidget* w = list->first(); w; w = list->next()) {
                 if ( !w->parentWidget() && w != topm && w->isVisible() && !w->isDesktop() ) {
                     if ( w == d->lastraised )
                         foundlast = TRUE;
                     if ( foundlast ) {
                         w->raise();
                         topsub = w;
                     }
                 }
             }
         }
         for (QWidget* w = list->first(); w; w = list->next()) {
             if ( !w->parentWidget() && w != topm && w->isVisible() && !w->isDesktop() ) {
                 if ( w == d->lastraised )
                     break;
                 w->raise();
                 topsub = w;
             }
         }
         d->lastraised = topsub;
         delete list;
     }
 
     // 3. Raise the active modal widget.
     if ( topm && topm != top ) {
         topm->show();
         topm->raise();
         // If we haven't already handled the fastAppShowing message
         if (!top && d->preloaded) {
 #ifndef QT_NO_COP
             QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
             e << d->appName;
 #endif
         }
         r = FALSE;
     }
 
     return r;
 }
 
 
 void QPEApplication::pidMessage( const QCString& msg, const QByteArray& data)
 {
 #ifdef Q_WS_QWS
 
         if ( msg == "quit()" ) {
                 tryQuit();
         }
         else if ( msg == "quitIfInvisible()" ) {
                 if ( d->qpe_main_widget && !d->qpe_main_widget->isVisible() )
                         quit();
         }
         else if ( msg == "close()" ) {
                 hideOrQuit();
         }
         else if ( msg == "disablePreload()" ) {
                 d->preloaded = FALSE;
                 d->keep_running = TRUE;
                 /* so that quit will quit */
         }
         else if ( msg == "enablePreload()" ) {
                 if (d->qpe_main_widget)
                         d->preloaded = TRUE;
                 d->keep_running = TRUE;
                 /* so next quit won't quit */
         }
         else if ( msg == "raise()" ) {
                 d->keep_running = TRUE;
                 d->notbusysent = FALSE;
                 raiseAppropriateWindow();
                 // Tell the system we're still chugging along...
                 QCopEnvelope e("QPE/System", "appRaised(QString)");
                 e << d->appName;
         }
         else if ( msg == "flush()" ) {
                 emit flush();
                 // we need to tell the desktop
                 QCopEnvelope e( "QPE/Desktop", "flushDone(QString)" );
                 e << d->appName;
         }
         else if ( msg == "reload()" ) {
                 emit reload();
         }
         else if ( msg == "setDocument(QString)" ) {
                 d->keep_running = TRUE;
                 QDataStream stream( data, IO_ReadOnly );
                 QString doc;
                 stream >> doc;
                 QWidget *mw = mainWidget();
                 if ( !mw )
                         mw = d->qpe_main_widget;
                 if ( mw )
                         Global::setDocument( mw, doc );
 
         } else if ( msg == "QPEProcessQCop()" ) {
             processQCopFile();
             d->sendQCopQ();
         }else
         {
             bool p = d->keep_running;
             d->keep_running = FALSE;
             emit appMessage( msg, data);
             if ( d->keep_running ) {
                 d->notbusysent = FALSE;
                 raiseAppropriateWindow();
                 if ( !p ) {
                     // Tell the system we're still chugging along...
 #ifndef QT_NO_COP
                     QCopEnvelope e("QPE/System", "appRaised(QString)");
                     e << d->appName;
 #endif
                 }
             }
             if ( p )
                 d->keep_running = p;
         }
 #endif
 }
 
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
 
   \sa showMainDocumentWidget()
 */
 void QPEApplication::showMainWidget( QWidget* mw, bool nomaximize )
 {
             d->show(mw, nomaximize );
 }
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
 
   This calls designates the application as
   a \link docwidget.html document-oriented\endlink application.
 
   The \a mw widget \e must have this slot: setDocument(const QString&).
 
   \sa showMainWidget()
 */
 void QPEApplication::showMainDocumentWidget( QWidget* mw, bool nomaximize )
 {
         if ( mw && argc() == 2 )
                 Global::setDocument( mw, QString::fromUtf8(argv()[1]) );
 
 
         d->show(mw, nomaximize );
 }
 
 
 /*!
   If an application is started via a \link qcop.html QCop\endlink
   message, the application will process the \link qcop.html
   QCop\endlink message and then quit. If the application calls this
   function while processing a \link qcop.html QCop\endlink message,
   after processing its outstanding \link qcop.html QCop\endlink
   messages the application will start 'properly' and show itself.
 
   \sa keepRunning()
 */
 void QPEApplication::setKeepRunning()
 {
         if ( qApp && qApp->inherits( "QPEApplication" ) ) {
                 QPEApplication * qpeApp = ( QPEApplication* ) qApp;
                 qpeApp->d->keep_running = TRUE;
         }
 }
 
 /*!
   Returns TRUE if the application will quit after processing the
   current list of qcop messages; otherwise returns FALSE.
 
   \sa setKeepRunning()
 */
 bool QPEApplication::keepRunning() const
 {
         return d->keep_running;
 }
 
 /*!
   \internal
 */
 void QPEApplication::internalSetStyle( const QString &style )
 {
 #if QT_VERSION >= 300
         if ( style == "QPE" ) {
                 setStyle( new QPEStyle );
         }
         else {
                 QStyle *s = QStyleFactory::create( style );
                 if ( s )
                         setStyle( s );
         }
 #else
         if ( style == "Windows" ) {
                 setStyle( new QWindowsStyle );
         }
         else if ( style == "QPE" ) {
                 setStyle( new QPEStyle );
         }
         else if ( style == "Light" ) {
                 setStyle( new LightStyle );
         }
 #ifndef QT_NO_STYLE_PLATINUM
         else if ( style == "Platinum" ) {
                 setStyle( new QPlatinumStyle );
         }
 #endif
 #ifndef QT_NO_STYLE_MOTIF
         else if ( style == "Motif" ) {
                 setStyle( new QMotifStyle );
         }
 #endif
 #ifndef QT_NO_STYLE_MOTIFPLUS
         else if ( style == "MotifPlus" ) {
                 setStyle( new QMotifPlusStyle );
         }
 #endif
 
         else {
                 QStyle *sty = 0;
                 QString path = QPEApplication::qpeDir ( ) + "/plugins/styles/";
 
                 if ( style. find ( ".so" ) > 0 )
                         path += style;
                 else
                         path = path + "lib" + style. lower ( ) + ".so"; // compatibility
 
                 static QLibrary *lastlib = 0;
                 static StyleInterface *lastiface = 0;
 
                 QLibrary *lib = new QLibrary ( path );
                 StyleInterface *iface = 0;
 
                 if (( lib-> queryInterface ( IID_Style, ( QUnknownInterface ** ) &iface ) == QS_OK ) && iface )
                         sty = iface-> style ( );
 
                 if ( sty ) {
                         setStyle ( sty );
 
                         if ( lastiface )
                                 lastiface-> release ( );
                         lastiface = iface;
 
                         if ( lastlib ) {
                                 lastlib-> unload ( );
                                 delete lastlib;
                         }
                         lastlib = lib;
                 }
                 else {
                         if ( iface )
                                 iface-> release ( );
                         delete lib;
 
                         setStyle ( new LightStyle ( ));
                 }
         }
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::prepareForTermination( bool willrestart )
 {
         if ( willrestart ) {
                 // Draw a big wait icon, the image can be altered in later revisions
                 //  QWidget *d = QApplication::desktop();
                 QImage img = Resource::loadImage( "launcher/new_wait" );
                 QPixmap pix;
                 pix.convertFromImage( img.smoothScale( 1 * img.width(), 1 * img.height() ) );
                 QLabel *lblWait = new QLabel( 0, "wait hack!", QWidget::WStyle_Customize |
                                               QWidget::WStyle_NoBorder | QWidget::WStyle_Tool );
                 lblWait->setPixmap( pix );
                 lblWait->setAlignment( QWidget::AlignCenter );
                 lblWait->show();
                 lblWait->showMaximized();
         }
 #ifndef SINGLE_APP
         { QCopEnvelope envelope( "QPE/System", "forceQuit()" );
         }
         processEvents(); // ensure the message goes out.
         sleep( 1 ); // You have 1 second to comply.
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::shutdown()
 {
         // Implement in server's QPEApplication subclass
 }
 
 /*!
   \internal
 */
 void QPEApplication::restart()
 {
         // Implement in server's QPEApplication subclass
 }
 
 static QPtrDict<void>* stylusDict = 0;
 static void createDict()
 {
         if ( !stylusDict )
                 stylusDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the current StylusMode for widget \a w.
 
   \sa setStylusOperation() StylusMode
 */
 QPEApplication::StylusMode QPEApplication::stylusOperation( QWidget* w )
 {
         if ( stylusDict )
                 return ( StylusMode ) ( int ) stylusDict->find( w );
         return LeftOnly;
 }
 
 /*!
     \enum QPEApplication::StylusMode
 
     \value LeftOnly the stylus only generates LeftButton
                        events (the default).
     \value RightOnHold the stylus generates RightButton events
                        if the user uses the press-and-hold gesture.
 
     \sa setStylusOperation() stylusOperation()
 */
 
 /*!
   Causes widget \a w to receive mouse events according to the stylus
   \a mode.
 
   \sa stylusOperation() StylusMode
 */
 void QPEApplication::setStylusOperation( QWidget * w, StylusMode mode )
 {
         createDict();
         if ( mode == LeftOnly ) {
                 stylusDict->remove
                 ( w );
                 w->removeEventFilter( qApp );
         }
         else {
                 stylusDict->insert( w, ( void* ) mode );
                 connect( w, SIGNAL( destroyed() ), qApp, SLOT( removeSenderFromStylusDict() ) );
                 w->installEventFilter( qApp );
         }
 }
 
 
 /*!
   \reimp
 */
 bool QPEApplication::eventFilter( QObject *o, QEvent *e )
 {
         if ( !o->isWidgetType() )
             return FALSE;
 
         if ( stylusDict && e->type() >= QEvent::MouseButtonPress && e->type() <= QEvent::MouseMove ) {
                 QMouseEvent * me = ( QMouseEvent* ) e;
                 StylusMode mode = (StylusMode)(int)stylusDict->find(o);
                 switch (mode) {
                         case RightOnHold:
                                 switch ( me->type() ) {
                                         case QEvent::MouseButtonPress:
                                                 if ( me->button() == LeftButton ) {
                                                     if (!d->presstimer )
                                                         d->presstimer = startTimer(500); // #### pref.
                                                         d->presswidget = (QWidget*)o;
                                                         d->presspos = me->pos();
                                                         d->rightpressed = FALSE;
                                                 }
                                                 break;
                                         case QEvent::MouseMove:
                                                 if (d->presstimer && (me->pos() - d->presspos).manhattanLength() > 8) {
                                                         killTimer(d->presstimer);
                                                         d->presstimer = 0;
                                                 }
                                                 break;
                                         case QEvent::MouseButtonRelease:
                                                 if ( me->button() == LeftButton ) {
                                                         if ( d->presstimer ) {
                                                                 killTimer(d->presstimer);
                                                                 d->presstimer = 0;
                                                         }
                                                         if ( d->rightpressed && d->presswidget ) {
                                                                 // Right released
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseButtonRelease, me->pos(),
                                                                                             RightButton, LeftButton + RightButton ) );
                                                                 // Left released, off-widget
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseMove, QPoint( -1, -1),
                                                                                             LeftButton, LeftButton ) );
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseButtonRelease, QPoint( -1, -1),
                                                                                             LeftButton, LeftButton ) );
                                                                 d->rightpressed = FALSE;
                                                                 return TRUE; // don't send the real Left release
                                                         }
                                                 }
                                                 break;
                                         default:
                                                 break;
                                 }
                                 break;
                         default:
                                 ;
                 }
         }
         else if ( e->type() == QEvent::KeyPress || e->type() == QEvent::KeyRelease ) {
                 QKeyEvent *ke = (QKeyEvent *)e;
                 if ( ke->key() == Key_Enter ) {
                         if ( o->isA( "QRadioButton" ) || o->isA( "QCheckBox" ) ) {
                                 postEvent( o, new QKeyEvent( e->type(), Key_Space, ' ',
                                                              ke->state(), " ", ke->isAutoRepeat(), ke->count() ) );
                                 return TRUE;
                         }
                 }
         }
         return FALSE;
 }
 
 /*!
   \reimp
 */
 void QPEApplication::timerEvent( QTimerEvent *e )
 {
         if ( e->timerId() == d->presstimer && d->presswidget ) {
                 // Right pressed
                 postEvent( d->presswidget,
                            new QMouseEvent( QEvent::MouseButtonPress, d->presspos,
                                             RightButton, LeftButton ) );
                 killTimer( d->presstimer );
                 d->presstimer = 0;
                 d->rightpressed = TRUE;
         }
 }
 
 void QPEApplication::removeSenderFromStylusDict()
 {
         stylusDict->remove
         ( ( void* ) sender() );
         if ( d->presswidget == sender() )
                 d->presswidget = 0;
 }
 
 /*!
   \internal
 */
 bool QPEApplication::keyboardGrabbed() const
 {
         return d->kbgrabbed;
 }
 
 
 /*!
   Reverses the effect of grabKeyboard(). This is called automatically
   on program exit.
 */
 void QPEApplication::ungrabKeyboard()
 {
         ((QPEApplication *) qApp )-> d-> kbgrabbed = false;
 }
 
 /*!
   Grabs the physical keyboard keys, e.g. the application's launching
   keys. Instead of launching applications when these keys are pressed
   the signals emitted are sent to this application instead. Some games
   programs take over the launch keys in this way to make interaction
   easier.
 
   \sa ungrabKeyboard()
 */
 void QPEApplication::grabKeyboard()
 {
         ((QPEApplication *) qApp )-> d-> kbgrabbed = true;
 }
 
 /*!
   \reimp
 */
 int QPEApplication::exec()
 {
         d->qcopQok = true;
 #ifndef QT_NO_COP
         d->sendQCopQ();
         if ( !d->keep_running )
             processEvents(); // we may have received QCop messages in the meantime.
 #endif
 
         if ( d->keep_running )
                 //|| d->qpe_main_widget && d->qpe_main_widget->isVisible() )
                 return QApplication::exec();
 
 #ifndef QT_NO_COP
 
         {
                 QCopEnvelope e( "QPE/System", "closing(QString)" );
                 e << d->appName;
         }
 #endif
         processEvents();
         return 0;
 }
 
 /*!
   \internal
   External request for application to quit.  Quits if possible without
   loosing state.
 */
 void QPEApplication::tryQuit()
 {
         if ( activeModalWidget() || strcmp( argv() [ 0 ], "embeddedkonsole" ) == 0 )
                 return ; // Inside modal loop or konsole. Too hard to save state.
 #ifndef QT_NO_COP
 
         {
                 QCopEnvelope e( "QPE/System", "closing(QString)" );
                 e << d->appName;
         }
 #endif
         processEvents();
 
         quit();
 }
 
 /*!
   \internal
 */
 void QPEApplication::installTranslation( const QString& baseName ) {
     QTranslator* trans = new QTranslator(this);
     QString tfn = qpeDir() + "/i18n/"+baseName;
     if ( trans->load( tfn ) )
         installTranslator( trans );
     else
         delete trans;
 }
 
 /*!
   \internal
   User initiated quit.  Makes the window 'Go Away'.  If preloaded this means
   hiding the window.  If not it means quitting the application.
   As this is user initiated we don't need to check state.
 */
 void QPEApplication::hideOrQuit()
 {
         processEvents();
 
         // If we are a preloaded application we don't actually quit, so emit
         // a System message indicating we're quasi-closing.
         if ( d->preloaded && d->qpe_main_widget )
 #ifndef QT_NO_COP
 
         {
                 QCopEnvelope e("QPE/System", "fastAppHiding(QString)" );
                 e << d->appName;
                 d->qpe_main_widget->hide();
         }
 #endif
         else
                 quit();
 }
 
 #if (__GNUC__ > 2 )
 extern "C" void __cxa_pure_virtual();
 
 void __cxa_pure_virtual()
 {
     fprintf( stderr, "Pure virtual called\n");
     abort();
 
 }
 
 #endif
 
 
-#if defined(QT_QWS_IPAQ) || defined(QT_QWS_SL5XXX) || defined(QT_QWS_RAMSES)
+#if defined(OPIE_NEW_MALLOC)
 
 // The libraries with the skiff package (and possibly others) have
 // completely useless implementations of builtin new and delete that
 // use about 50% of your CPU. Here we revert to the simple libc
 // functions.
 
 void* operator new[]( size_t size )
 {
         return malloc( size );
 }
 
 void* operator new( size_t size )
 {
         return malloc( size );
 }
 
 void operator delete[]( void* p )
 {
         free( p );
 }
 
 void operator delete[]( void* p, size_t /*size*/ )
 {
         free( p );
 }
 
 
 void operator delete( void* p )
 {
         free( p );
 }
 
 void operator delete( void* p, size_t /*size*/ )
 {
         free( p );
 }
 
 #endif
 
 #if ( QT_VERSION <= 230 ) && !defined(SINGLE_APP)
 #include <qwidgetlist.h>
 #ifdef QWS
 #include <qgfx_qws.h>
 extern QRect qt_maxWindowRect;
 void qt_setMaxWindowRect(const QRect& r )
 {
         qt_maxWindowRect = qt_screen->mapFromDevice( r,
                            qt_screen->mapToDevice( QSize( qt_screen->width(), qt_screen->height() ) ) );
         // Re-resize any maximized windows
         QWidgetList* l = QApplication::topLevelWidgets();
         if ( l ) {
                 QWidget * w = l->first();
                 while ( w ) {
                         if ( w->isVisible() && w->isMaximized() ) {
                                 w->showMaximized();
                         }
                         w = l->next();
                 }
                 delete l;
         }
 }
 #endif
 #endif
diff --git a/library/storage.cpp b/library/storage.cpp
index 1ce43bc..dc5cc22 100644
--- a/library/storage.cpp
+++ b/library/storage.cpp
@@ -1,346 +1,344 @@
 /**********************************************************************
 ** Copyright (C) Holger 'zecke' Freyther <freyther@kde.org>
 ** Copyright (C) Lorn Potter <llornkcor@handhelds.org>
 ** Copyright (C) 2000 Trolltech AS.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 
 #include <qpe/storage.h>
-#if defined(QT_QWS_SL5XXX)
 #include <qpe/custom.h>
-#endif
 
 #include <qfile.h>
 #include <qtimer.h>
 #include <qcopchannel_qws.h>
 
 #include <stdio.h>
 
 #if defined(_OS_LINUX_) || defined(Q_OS_LINUX)
 #include <sys/vfs.h>
 #include <mntent.h>
 #endif
 
 #include <qstringlist.h>
 
 #include <sys/vfs.h>
 #include <mntent.h>
 
 
 static bool isCF(const QString& m)
 {
     FILE* f = fopen("/var/run/stab", "r");
     if (!f) f = fopen("/var/state/pcmcia/stab", "r");
     if (!f) f = fopen("/var/lib/pcmcia/stab", "r");
     if ( f ) {
         char line[1024];
         char devtype[80];
         char devname[80];
         while ( fgets( line, 1024, f ) ) {
               // 0       ide     ide-cs  0       hda     3       0
             if ( sscanf(line,"%*d %s %*s %*s %s", devtype, devname )==2 )
               {
                   if ( QString(devtype) == "ide" && m.find(devname)>0 ) {
                       fclose(f);
                       return TRUE;
                   }
               }
         }
         fclose(f);
     }
     return FALSE;
 }
 
 /*! \class StorageInfo storage.h
   \brief The StorageInfo class describes the disks mounted on the file system.
 
   This class provides access to the mount information for the Linux
   filesystem. Each mount point is represented by the FileSystem class.
   To ensure this class has the most up to date size information, call
   the update() method. Note that this will automatically be signaled
   by the operating system when a disk has been mounted or unmounted.
 
   \ingroup qtopiaemb
 */
 
 /*! Constructor that determines the current mount points of the filesystem.
   The standard \a parent parameters is passed on to QObject.
  */
 StorageInfo::StorageInfo( QObject *parent )
     : QObject( parent )
 {
     mFileSystems.setAutoDelete( TRUE );
     channel = new QCopChannel( "QPE/Card", this );
     connect( channel, SIGNAL(received(const QCString &, const QByteArray &)),
        this, SLOT(cardMessage( const QCString &, const QByteArray &)) );
     update();
 }
 
 /*! Returns the longest matching FileSystem that starts with the
    same prefix as \a filename as its mount point.
 */
 const FileSystem *StorageInfo::fileSystemOf( const QString &filename )
 {
     for (QListIterator<FileSystem> i(mFileSystems); i.current(); ++i) {
   if ( filename.startsWith( (*i)->path() ) )
        return (*i);
     }
     return 0;
 }
 
 
 void StorageInfo::cardMessage( const QCString& msg, const QByteArray& )
 {
     if ( msg == "mtabChanged()" )
         update();
 }
 
 
 /*! Updates the mount and free space available information for each mount
   point. This method is automatically called when a disk is mounted or
   unmounted.
 */
 // cause of the lack of a d pointer we need
 // to store informations in a config file :(
 void StorageInfo::update()
 {
     //qDebug("StorageInfo::updating");
 #if defined(_OS_LINUX_) || defined(Q_OS_LINUX)
     struct mntent *me;
     FILE *mntfp = setmntent( "/etc/mtab", "r" );
 
     QStringList curdisks;
     QStringList curopts;
     QStringList curfs;
     bool rebuild = FALSE;
     int n=0;
     if ( mntfp ) {
   while ( (me = getmntent( mntfp )) != 0 ) {
       QString fs = me->mnt_fsname;
       if ( fs.left(7)=="/dev/hd" || fs.left(7)=="/dev/sd"
            || fs.left(8)=="/dev/mtd" || fs.left(9) == "/dev/mmcd"
            || fs.left( 14 ) == "/dev/mmc/part1"
            || fs.left(5)=="tmpfs" || fs.left(9)=="/dev/root" )
       {
     n++;
     curdisks.append(fs);
     curopts.append( me->mnt_opts );
     //qDebug("-->fs %s opts %s", fs.latin1(), me->mnt_opts );
     curfs.append( me->mnt_dir );
     bool found = FALSE;
     for (QListIterator<FileSystem> i(mFileSystems); i.current(); ++i) {
         if ( (*i)->disk() == fs ) {
       found = TRUE;
       break;
         }
     }
     if ( !found )
         rebuild = TRUE;
       }
   }
   endmntent( mntfp );
     }
     if ( rebuild || n != (int)mFileSystems.count() ) {
   mFileSystems.clear();
   QStringList::ConstIterator it=curdisks.begin();
   QStringList::ConstIterator fsit=curfs.begin();
   QStringList::ConstIterator optsIt=curopts.begin();
   for (; it!=curdisks.end(); ++it, ++fsit, ++optsIt) {
       QString opts = *optsIt;
 
       QString disk = *it;
       QString humanname;
       bool removable = FALSE;
       if ( isCF(disk) ) {
     humanname = tr("CF Card");
     removable = TRUE;
       } else if ( disk == "/dev/hda1" ) {
     humanname = tr("Hard Disk");
       } else if ( disk.left(9) == "/dev/mmcd" ) {
     humanname = tr("SD Card");
     removable = TRUE;
       } else if ( disk.left( 14 ) == "/dev/mmc/part1" ) {
     humanname = tr("MMC Card");
     removable = TRUE;
       } else if ( disk.left(7) == "/dev/hd" )
     humanname = tr("Hard Disk") + " " + disk;
       else if ( disk.left(7) == "/dev/sd" )
     humanname = tr("SCSI Hard Disk") + " " + disk;
       else if ( disk.left(14) == "/dev/mtdblock6" ) //openzaurus ramfs
     humanname = tr("Internal Memory");
       else if ( disk == "/dev/mtdblock1" || humanname == "/dev/mtdblock/1" )
     humanname = tr("Internal Storage");
       else if ( disk.left(14) == "/dev/mtdblock/" )
     humanname = tr("Internal Storage") + " " + disk;
       else if ( disk.left(13) == "/dev/mtdblock" )
     humanname = tr("Internal Storage") + " " + disk;
       else if ( disk.left(9) == "/dev/root" )
     humanname = tr("Internal Storage") + " " + disk;
       else if ( disk.left(5) == "tmpfs" ) //ipaqs /mnt/ramfs
     humanname = tr("Internal Memory");
       FileSystem *fs = new FileSystem( disk, *fsit, humanname, removable, opts );
       mFileSystems.append( fs );
   }
   emit disksChanged();
     } else {
   // just update them
   for (QListIterator<FileSystem> i(mFileSystems); i.current(); ++i)
       i.current()->update();
     }
 #endif
 }
 
 bool deviceTab( const char *device) {
    QString name = device;
    bool hasDevice=false;
    struct mntent *me;
     FILE *mntfp = setmntent( "/etc/mtab", "r" );
     if ( mntfp ) {
         while ( (me = getmntent( mntfp )) != 0 ) {
           QString deviceName = me->mnt_fsname;
 //          qDebug(deviceName);
             if( deviceName.left(name.length()) == name) {
                hasDevice = true;
             }
         }
     }
     endmntent( mntfp );
     return hasDevice;
 }
 
 /*!
  * @fn static bool StorageInfo::hasCf()
  * @brief returns whether device has Cf mounted
  *
  */
 bool StorageInfo::hasCf()
 {
     return deviceTab("/dev/hd");
 }
 
 /*!
  * @fn static bool StorageInfo::hasSd()
  * @brief returns whether device has SD mounted
  *
  */
 bool StorageInfo::hasSd()
 {
     return deviceTab("/dev/mmcd");
 }
 
 /*!
  * @fn static bool StorageInfo::hasMmc()
  * @brief reutrns whether device has mmc mounted
  *
  */
 bool StorageInfo::hasMmc()
 {
    bool hasMmc=false;
    if( deviceTab("/dev/mmc/part"))
       hasMmc=true;
    if( deviceTab("/dev/mmcd"))
       hasMmc=true;
    return hasMmc;
 }
 
 /*! \fn const QList<FileSystem> &StorageInfo::fileSystems() const
   Returns a list of all available mounted file systems.
 
   \warning This may change in Qtopia 3.x to return only relevant Qtopia file systems (and ignore mount points such as /tmp)
 */
 
 /*! \fn void StorageInfo::disksChanged()
   Gets emitted when a disk has been mounted or unmounted, such as when
   a CF c
 */
 //---------------------------------------------------------------------------
 
 FileSystem::FileSystem( const QString &disk, const QString &path, const QString &name, bool rem, const QString &o )
     : fsdisk( disk ), fspath( path ), humanname( name ), blkSize(512), totalBlks(0), availBlks(0), removable( rem ), opts( o )
 {
     update();
 }
 
 void FileSystem::update()
 {
 #if defined(_OS_LINUX_) || defined(Q_OS_LINUX)
     struct statfs fs;
     if ( !statfs( fspath.latin1(), &fs ) ) {
   blkSize = fs.f_bsize;
   totalBlks = fs.f_blocks;
   availBlks = fs.f_bavail;
     } else {
   blkSize = 0;
   totalBlks = 0;
   availBlks = 0;
     }
 #endif
 }
 
 /*! \class FileSystem storage.h
   \brief The FileSystem class describes a single mount point.
 
   This class simply returns information about a mount point, including
   file system name, mount point, human readable name, size information
   and mount options information.
   \ingroup qtopiaemb
 
   \sa StorageInfo
 */
 
 /*! \fn const QString &FileSystem::disk() const
   Returns the file system name, such as /dev/hda3
 */
 
 /*! \fn const QString &FileSystem::path() const
   Returns the mount path, such as /home
 */
 
 /*! \fn const QString &FileSystem::name() const
   Returns the translated, human readable name for the mount directory.
 */
 
 /*! \fn const QString &FileSystem::options() const
   Returns the mount options
 */
 
 /*! \fn long FileSystem::blockSize() const
   Returns the size of each block on the file system.
 */
 
 /*! \fn long FileSystem::totalBlocks() const
   Returns the total number of blocks on the file system
 */
 
 /*! \fn long FileSystem::availBlocks() const
   Returns the number of available blocks on the file system
  */
 
 /*! \fn bool FileSystem::isRemovable() const
   Returns flag whether the file system can be removed, such as a CF card
   would be removable, but the internal memory wouldn't
 */
 
 /*! \fn bool FileSystem::isWritable() const
   Returns flag whether the file system is mounted as writable or read-only.
   Returns FALSE if read-only, TRUE if read and write.
 */
 
 /*! \fn QStringList StorageInfo::fileSystemNames() const
   Returns a list of filesystem names.
 */