Use QObject::tr rather than qApp->translate

1 files changed, 3 insertions, 3 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index d5e3c5c..80975c9 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -183,193 +183,193 @@ struct z_button {
     { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"),
 	"devicebuttons/z_calendar",
 	"datebook", "nextView()",
 	"today", "raise()" },
     { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
 	"devicebuttons/z_contact",
 	"addressbook", "raise()",
 	"addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
 	"devicebuttons/z_home",
 	"QPE/Launcher", "home()",
 	"buttonsettings", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
 	"devicebuttons/z_menu",
  	"QPE/TaskBar", "toggleMenu()",
 	"QPE/TaskBar", "toggleStartMenu()" },
     { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
 	"devicebuttons/z_mail",
 	"mail", "raise()",
 	"mail", "newMail()" },
 };
 
 static QCString makeChannel ( const char *str )
 {
 	if ( str && !::strchr ( str, '/' ))
 		return QCString ( "QPE/Application/" ) + str;
 	else
 		return str;
 }
 
 
 
 
 ODevice *ODevice::inst ( )
 {
 	static ODevice *dev = 0;
 	
 	if ( !dev ) {
 		if ( QFile::exists ( "/proc/hal/model" ))
 			dev = new iPAQ ( );
 		else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
 			dev = new Zaurus ( );
 		else
 			dev = new ODevice ( );
 			
 		dev-> init ( );
 	}
 	return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
 	d = new ODeviceData;
 
 	d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
 	d-> m_modelstr = "Unknown";
 	d-> m_model = Model_Unknown;
 	d-> m_vendorstr = "Unknown";
 	d-> m_vendor = Vendor_Unknown;
 	d-> m_systemstr = "Unknown";
 	d-> m_system = System_Unknown;
 	d-> m_sysverstr = "0.0";
 	d-> m_rotation = Rot0;
 	
 	d-> m_holdtime = 1000; // 1000ms
 	
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));	                     	
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
 	if ( msg == "deviceButtonMappingChanged()" ) {
 		reloadButtonMapping ( );
 	} 
 }
 
 void ODevice::init ( )
 {
 	// Simulation uses iPAQ 3660 device buttons
 
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;	
 		ODeviceButton b;
 		
 		if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {		
 			b. setKeycode ( ib-> code );
-			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 			d-> m_buttons. append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 }
 
 ODevice::~ODevice ( )
 {
 	delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
 	return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 
 bool ODevice::suspend ( )
 {
 	if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
 		return false;
 
 	if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
 		return false;
 
 	bool res = false;
 	
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 	
 	::sync ( ); // flush fs caches
 	res = ( ::system ( "apm --suspend" ) == 0 );
 
 	// This is needed because the iPAQ apm implementation is asynchronous and we
 	// can not be sure when exactly the device is really suspended
 	// This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
 	if ( res ) {	
 		do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
 			::usleep ( 200 * 1000 );
 			::gettimeofday ( &tvn, 0 );				
 		} while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
 	}
 	
 	return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 
 bool ODevice::setDisplayStatus ( bool on )
 {
 	if ( d-> m_model == Model_Unknown )
 		return false;
 
 	bool res = false;
 	int fd;
 	
 	if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 		res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
 		::close ( fd );
 	}	                                                                                       
 	return res;
 }
 
 bool ODevice::setDisplayBrightness ( int )
 {
 	return false;
 }
 
 int ODevice::displayBrightnessResolution ( ) const
 {
 	return 16;
 }
 
 QString ODevice::vendorString ( ) const
 {
 	return d-> m_vendorstr;
 }
 
 OVendor ODevice::vendor ( ) const
@@ -541,193 +541,193 @@ void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 	buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
 	if ( button >= (int) d-> m_buttons. count ( ))
 		return;
 		
 	ODeviceButton &b = d-> m_buttons [button];
     	b. setHeldAction ( action );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
 	buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
 	d-> m_vendorstr = "HP";
 	d-> m_vendor = Vendor_HP;
 
 	QFile f ( "/proc/hal/model" );
 
 	if ( f. open ( IO_ReadOnly )) {
 		QTextStream ts ( &f );
 
 		d-> m_modelstr = "H" + ts. readLine ( );
 
 		if ( d-> m_modelstr == "H3100" )
 			d-> m_model = Model_iPAQ_H31xx;
 		else if ( d-> m_modelstr == "H3600" )
 			d-> m_model = Model_iPAQ_H36xx;
 		else if ( d-> m_modelstr == "H3700" )
 			d-> m_model = Model_iPAQ_H37xx;
 		else if ( d-> m_modelstr == "H3800" )
 			d-> m_model = Model_iPAQ_H38xx;
 		else if ( d-> m_modelstr == "H3900" )
 			d-> m_model = Model_iPAQ_H39xx;
 		else
 			d-> m_model = Model_Unknown;
 
 		f. close ( );
 	}
 
 	switch ( d-> m_model ) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H38xx:
 			d-> m_rotation = Rot90;
 			break;
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 		case Model_iPAQ_H39xx:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) { 
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 		
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 		
 		f. close ( );
 	}
 
 	m_leds [0] = m_leds [1] = Led_Off;
 	
 	m_power_timer = 0;
 	
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;	
 		ODeviceButton b;
 		
 		if (( ib-> model & d-> m_model ) == d-> m_model ) {		
 			b. setKeycode ( ib-> code );
-			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                                         
 			d-> m_buttons. append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 	
 	if ( d-> m_qwsserver )
 		QWSServer::setKeyboardFilter ( this );	
 }
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
 	unsigned char mode;
 	unsigned char pwr;
 	unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Power;
 
 	if ( d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_BlueTooth;
 	return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 
 	if ( l == Led_Power )
 		vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
 	else if ( l == Led_BlueTooth && d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_Off; // << Led_On << ???
 		
 	return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {	
 	switch ( l ) {
 		case Led_Power:
 			return m_leds [0];
 		case Led_BlueTooth:
 			return m_leds [1];
 		default:
 			return Led_Off;
 	}
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st ) 
 {
 	static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
 	if ( l == Led_Power ) {
 		if ( fd >= 0 ) {
 			LED_IN leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. TotalTime  = 0;
 			leds. OnTime     = 0;
 			leds. OffTime    = 1;
 			leds. OffOnBlink = 2;
 
 			switch ( st ) {
 				case Led_Off      : leds. OffOnBlink = 0; break;
 				case Led_On       : leds. OffOnBlink = 1; break;
 				case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
 				case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
 			}
 
 			if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) {
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 
@@ -906,193 +906,193 @@ int iPAQ::readLightSensor ( )
 		if ( ::read ( fd, buffer, 5 ) == 5 ) {
 			char *endptr;
 		
 			buffer [4] = 0;
 			val = ::strtol ( buffer + 2, &endptr, 16 );
 			
 			if ( *endptr != 0 )
 				val = -1;
 		}	
 		::close ( fd );
 	}
 
 	return val;
 }
 
 int iPAQ::lightSensorResolution ( ) const
 {
 	return 256;
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
 
 
 void Zaurus::init ( )
 {
 	d-> m_vendorstr = "Sharp";
 	d-> m_vendor = Vendor_Sharp;
 
 	QFile f ( "/proc/filesystems" );
 
 	if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
 		d-> m_vendorstr = "OpenZaurus Team";
 		d-> m_systemstr = "OpenZaurus";
 		d-> m_system = System_OpenZaurus;
 
 		f. close ( );
 
 		f. setName ( "/etc/oz_version" );
 		if ( f. open ( IO_ReadOnly )) { 
 			QTextStream ts ( &f );
 			d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
 			f. close ( );
 		}
 	}
 	else {
 		d-> m_systemstr = "Zaurus";
 		d-> m_system = System_Zaurus;
 	}
 
 	f. setName ( "/proc/deviceinfo/product" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QTextStream ts ( &f );
 		QString model = ts. readLine ( );
 		f. close ( );
 
 		d-> m_modelstr = QString("Zaurus ") + model;
 		if ( model == "SL-5500" )
 			d-> m_model = Model_Zaurus_SL5500;
 		else if ( model == "SL-C700" )
 			d-> m_model = Model_Zaurus_SLC700;
 		else if ( model == "SL-A300" )
 			d-> m_model = Model_Zaurus_SLA300;
 		else if ( model == "SL-B600" || model == "SL-5600" )
 			d-> m_model = Model_Zaurus_SLB600;
 		else
 			d-> m_model = Model_Zaurus_SL5000;
 	}
 	else {
 		d-> m_model = Model_Zaurus_SL5000;
 		d-> m_modelstr = "Zaurus (model unknown)";
 	}
 
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLC700:
 			/* note for C700, we must check the display rotation
 			 * sensor to set an appropriate value
 			 */
 		case Model_Zaurus_SLA300:
 		case Model_Zaurus_SLB600:
 		case Model_Zaurus_SL5500:
 		case Model_Zaurus_SL5000:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	for ( uint i = 0; i < ( sizeof( z_buttons ) / sizeof( z_button )); i++ ) {
 		z_button *zb = z_buttons + i;	
 		ODeviceButton b;
 		
 		b. setKeycode ( zb-> code );
-		b. setUserText ( qApp-> translate ( "Button", zb-> utext ));
+		b. setUserText ( QObject::tr ( "Button", zb-> utext ));
 		b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
 		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
 		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
                                         
 		d-> m_buttons. append ( b );
 	}
 	reloadButtonMapping ( );
 
 	m_leds [0] = Led_Off;
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
 #define	SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 typedef struct sharp_led_status {
   int which;   /* select which LED status is wanted. */
   int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_NEWMAIL_EXISTS  1   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_UNREAD_MAIL_EX  2   /* for SHARP_LED_MAIL_EXISTS */
 
 // #include <asm/sharp_apm.h> // including kernel headers is evil ...
 
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 	static int fd = ::open ( "/dev/sharp_buz", O_RDWR|O_NONBLOCK );
   
 	if ( fd >= 0 )
 		::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
 }
 
 
 void Zaurus::alarmSound ( ) 
 {
 	buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
 }
 
 void Zaurus::touchSound ( ) 
 {
 	buzzer ( SHARP_BUZ_TOUCHSOUND );
 }