fix stupid bug that broke replaying capture files

1 files changed, 3 insertions, 2 deletions

diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp
index e8d9de7..c8d77a7 100644
--- a/noncore/net/wellenreiter/gui/wellenreiter.cpp
+++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp
@@ -425,205 +425,206 @@ void Wellenreiter::receivePacket( OPacket* p )
     OEthernetPacket* eth = static_cast<OEthernetPacket*>( childIfToParse( p, "Ethernet" ) );
     if ( eth )
     {
         handleEthernetData( p, eth, source, dest );
     }
 
     // check for an arp frame since arp frames come in two flavours:
     // 802.11 encapsulates ARP data within IP packets while wired ethernet doesn't.
     OARPPacket* arp = static_cast<OARPPacket*>( childIfToParse( p, "ARP" ) );
     if ( arp )
     {
         handleARPData( p, arp, source, dest );
     }
 
     // check for a ip frame
     OIPPacket* ip = static_cast<OIPPacket*>( childIfToParse( p, "IP" ) );
     if ( ip )
     {
         handleIPData( p, ip, source, dest );
     }
 
     //handleNotification( p );
 
 }
 
 
 void Wellenreiter::stopClicked()
 {
     if ( iface )
     {
         disconnect( SIGNAL( receivedPacket(Opie::Net::OPacket*) ), this, SLOT( receivePacket(Opie::Net::OPacket*) ) );
         disconnect( SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) );
         iface->setChannelHopping(); // stop hopping channels
     }
     else
         killTimers();
 
     pcap->close();
     sniffing = false;
 
     if ( iface )
     {
         // switch off monitor mode
         iface->setMode( "managed" );
         // switch off promisc flag
         iface->setPromiscuousMode( false );
 
         system( "cardctl reset; sleep 1" ); //FIXME: Use OProcess
     }
 
     logwindow->log( "(i) Stopped Scanning." );
     assert( parent() );
     ( (QMainWindow*) parent() )->setCaption( "Wellenreiter II" );
 
     // message the user
     QMessageBox::information( this, "Wellenreiter II",
                               tr( "Your wireless card\nshould now be usable again." ) );
 
     sniffing = false;
     emit( stoppedSniffing() );
 
     #ifdef QWS
     if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() )
     {
         QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Enable;
     }
     #else
         #warning FIXME: setScreenSaverMode is not operational on the X11 build
     #endif
 
     // print out statistics
     for( QMap<QString,int>::ConstIterator it = pcap->statistics().begin(); it != pcap->statistics().end(); ++it )
        statwindow->updateCounter( it.key(), it.data() );
 }
 
 
 void Wellenreiter::startClicked()
 {
     // get configuration from config window
 
     const QString& interface = configwindow->interfaceName->currentText();
     const int cardtype = configwindow->driverType();
     const int interval = configwindow->hoppingInterval();
 
     if ( ( interface == "" ) || ( cardtype == 0 ) )
     {
         QMessageBox::information( this, "Wellenreiter II",
                                   tr( "Your device is not\nproperly configured. Please reconfigure!" ) );
         return;
     }
 
     // configure device
     ONetwork* net = ONetwork::instance();
 
     // TODO: check if interface is wireless and support sniffing for non-wireless interfaces
 
+    if ( cardtype != DEVTYPE_FILE )
+    {
+    
     if ( !net->isPresent( interface ) )
     {
         QMessageBox::information( this, "Wellenreiter II",
                                   tr( "The configured device (%1)\nis not available on this system\n. Please reconfigure!" ).arg( interface ) );
         return;
     }
 
     iface = static_cast<OWirelessNetworkInterface*>(net->interface( interface )); // fails if network is not wireless!
     assert( iface );
 
     // bring device UP
-    if ( cardtype != DEVTYPE_FILE )
-    {
         iface->setUp( true );
         if ( !iface->isUp() )
         {
             QMessageBox::warning( this, "Wellenreiter II",
                                 tr( "Can't bring interface '%1' up:\n" ).arg( iface->name() ) + strerror( errno ) );
             return;
         }
     }
     // set monitor mode
     bool usePrism = configwindow->usePrismHeader();
 
     switch ( cardtype )
     {
         case DEVTYPE_CISCO: iface->setMonitoring( new OCiscoMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_WLAN_NG: iface->setMonitoring( new OWlanNGMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_HOSTAP: iface->setMonitoring( new OHostAPMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_ORINOCO: iface->setMonitoring( new OOrinocoMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_MANUAL: QMessageBox::information( this, "Wellenreiter II", tr( "Bring your device into\nmonitor mode now." ) ); break;
         case DEVTYPE_FILE: qDebug( "Wellenreiter: Capturing from file '%s'", (const char*) interface ); break;
         default: assert( 0 ); // shouldn't reach this
     }
 
     // switch device into monitor mode
     if ( cardtype < DEVTYPE_FILE )
     {
         if ( cardtype != DEVTYPE_MANUAL )
             iface->setMode( "monitor" );
         if ( iface->mode() != "monitor" )
         {
             if ( QMessageBox::warning( this, "Wellenreiter II",
                                   tr( "Can't set interface '%1'\ninto monitor mode:\n" ).arg( iface->name() ) + strerror( errno ) +
                                   tr( "\nContinue with limited functionality?" ), QMessageBox::Yes, QMessageBox::No ) == QMessageBox::No )
                 return;
         }
     }
 
     // open GPS device
     if ( configwindow->enableGPS->isChecked() )
     {
         qDebug( "Wellenreiter:GPS enabled @ %s:%d", (const char*) configwindow->gpsdHost->currentText(), configwindow->gpsdPort->value() );
         gps->open( configwindow->gpsdHost->currentText(), configwindow->gpsdPort->value() );
     }
 
     // open pcap and start sniffing
 
     if ( configwindow->writeCaptureFile->isChecked() ) // write to a user specified capture file?
     {
         dumpname = configwindow->captureFileName->text();
         if ( dumpname.isEmpty() ) dumpname = "captureFile";
         dumpname.append( '-' );
         dumpname.append( QTime::currentTime().toString().replace( QRegExp( ":" ), "-" ) );
         dumpname.append( ".wellenreiter" );
     }
     else // write it anyway ;)
     {
         dumpname = "/var/log/dump.wellenreiter";
     }
 
     if ( cardtype != DEVTYPE_FILE )
         pcap->open( interface );
     else
         pcap->open( QFile( interface ) );
 
     qDebug( "Wellenreiter:: dumping to %s", (const char*) dumpname );
     pcap->openDumpFile( dumpname );
 
     if ( !pcap->isOpen() )
     {
         QMessageBox::warning( this, "Wellenreiter II", tr( "Can't open packet capturer for\n'%1':\n" ).arg(
                               cardtype == DEVTYPE_FILE ? (const char*) interface : iface->name() ) + QString(strerror( errno ) ));
         return;
     }
 
     // set capturer to non-blocking mode
     pcap->setBlocking( false );
 
     // start channel hopper
     if ( cardtype != DEVTYPE_FILE )
     {
         logwindow->log( QString().sprintf( "(i) Starting channel hopper (d=%d ms)", configwindow->hopInterval->value() ) );
         iface->setChannelHopping( configwindow->hopInterval->value() ); //use interval from config window
     }
 
     if ( cardtype != DEVTYPE_FILE )
     {
         // connect socket notifier and start channel hopper
         connect( pcap, SIGNAL( receivedPacket(Opie::Net::OPacket*) ), this, SLOT( receivePacket(Opie::Net::OPacket*) ) );
         connect( iface->channelHopper(), SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) );
     }
     else
     {
         // start timer for reading packets
         startTimer( 100 );
     }
 
     logwindow->log( "(i) Started Scanning." );