Please review!

- change modem default commands because we don't interpret ~ and friends
  (minicom does AFAIK)
- disable unused AT settings for now
- when cancelling dialing, and we didn't yet get a single byte from the modem,
  don't hangup

5 files changed, 47 insertions, 44 deletions

diff --git a/noncore/apps/opie-console/atconfigdialog.cpp b/noncore/apps/opie-console/atconfigdialog.cpp
index 87a08f6..5c02692 100644
--- a/noncore/apps/opie-console/atconfigdialog.cpp
+++ b/noncore/apps/opie-console/atconfigdialog.cpp
@@ -9,6 +9,7 @@
 #include <qscrollview.h>
 
 #include "atconfigdialog.h"
+#include "io_modem.h"
 
 
 ATConfigDialog::ATConfigDialog(  QWidget* parent, const char* name, bool modal, WFlags fl )
@@ -170,6 +171,21 @@ void ATConfigDialog::readConfig( const Profile& config ) {
     bpsDetectBox->setCurrentItem( config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT ) );
     dcdLinesBox->setCurrentItem( config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES ) );
     multiLineUntagBox->setCurrentItem( config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG ) );
+
+	// Not implemented yet
+	resetStringLine->setEnabled(false);
+	dialSuf1Line->setEnabled(false);
+	dialPref2Line->setEnabled(false);
+	dialSuf2Line->setEnabled(false);
+	dialPref3Line->setEnabled(false);
+	dialSuf3Line->setEnabled(false);
+	dialTimeSpin->setEnabled(false);
+	delayRedialSpin->setEnabled(false);
+	numberTriesSpin->setEnabled(false);
+	dtrDropTimeSpin->setEnabled(false);
+	bpsDetectBox->setEnabled(false);
+	dcdLinesBox->setEnabled(false);
+	multiLineUntagBox->setEnabled(false);
 }
 
 void ATConfigDialog::writeConfig( Profile& config ) {
diff --git a/noncore/apps/opie-console/atconfigdialog.h b/noncore/apps/opie-console/atconfigdialog.h
index 4dd033b..8cb044e 100644
--- a/noncore/apps/opie-console/atconfigdialog.h
+++ b/noncore/apps/opie-console/atconfigdialog.h
@@ -5,25 +5,6 @@
 #include <qdialog.h>
 #include "profile.h"
 
-#define MODEM_DEFAULT_INIT_STRING  "~^M~ATZ^M~"
-#define MODEM_DEFAULT_RESET_STRING "~^M~ATZ^M~"
-#define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
-#define MODEM_DEFAULT_DIAL_SUFFIX1 "^M"
-#define MODEM_DEFAULT_DIAL_PREFIX2 "ATDP"
-#define MODEM_DEFAULT_DIAL_SUFFIX2 "^M"
-#define MODEM_DEFAULT_DIAL_PREFIX3 "ATX1DT"
-#define MODEM_DEFAULT_DIAL_SUFFIX3 ";X4D^M"
-#define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
-#define MODEM_DEFAULT_HANGUP_STRING "~~+++~~ATH^M"
-#define MODEM_DEFAULT_CANCEL_STRING "^M"
-#define MODEM_DEFAULT_DIAL_TIME     45
-#define MODEM_DEFAULT_DELAY_REDIAL  2
-#define MODEM_DEFAULT_NUMBER_TRIES  10
-#define MODEM_DEFAULT_DTR_DROP_TIME 1
-#define MODEM_DEFAULT_BPS_DETECT    0   // bool
-#define MODEM_DEFAULT_DCD_LINES     1   //bool
-#define MODEM_DEFAULT_MULTI_LINE_UNTAG 0 // bool
-
 class QLineEdit;
 class QSpinBox;
 class QComboBox;
diff --git a/noncore/apps/opie-console/dialer.cpp b/noncore/apps/opie-console/dialer.cpp
index 51d4093..d37e406 100644
--- a/noncore/apps/opie-console/dialer.cpp
+++ b/noncore/apps/opie-console/dialer.cpp
@@ -58,6 +58,7 @@ Dialer::Dialer(const Profile& profile, int fd, QWidget *parent, const char *name
 	//m_profile.writeEntry("Termination", "\n");
 
 	usercancel = 0;
+	cleanshutdown = 0;
 
 	fcntl(m_fd, F_SETFL, O_NONBLOCK);
 
@@ -133,19 +134,19 @@ void Dialer::dial(const QString& number)
 
 void Dialer::trydial(const QString& number)
 {
-	//if(state != state_cancel)
-	//{
-		if(state != state_cancel) switchState(state_preinit);
-		send("+++ATH");
+	if(state != state_cancel) switchState(state_preinit);
+	if(cleanshutdown)
+	{
+		send(m_profile.readEntry("HangupString"));
+		//send("+++ATH");
 		send("");
-		//QString response = receive();
-	//}
+	}
 
 	if(state != state_cancel)
 	{
 		switchState(state_init);
-		send("ATZ");
-		//send(m_profile.readEntry("InitString"));
+		//send("ATZ");
+		send(m_profile.readEntry("InitString"));
 		QString response2 = receive();
 		if(!response2.contains("\nOK\r"))
 			reset();
@@ -175,10 +176,10 @@ void Dialer::trydial(const QString& number)
 	{
 		switchState(state_dialing);
 
-		send(QString("ATDT %1").arg(number));
-		//send(QString("%1 %2").arg(m_profile.readEntry("DialPrefix1")).arg(number));
+		//send(QString("ATDT %1").arg(number));
+		send(QString("%1 %2").arg(m_profile.readEntry("DialPrefix1")).arg(number));
 		QString response5 = receive();
-		if(!response5.contains("\nCONNECT"))
+		if(!response5.contains("\n" + m_profile.readEntry("DefaultConnect")))
 		{
 			if(response5.contains("BUSY"))
 				switchState(state_dialing);
@@ -204,7 +205,7 @@ void Dialer::send(const QString& msg)
 	int bytes;
 	QString termination;
 
-qWarning("Sending: '%s'", m.latin1());
+	//qWarning("Sending: '%s'", m.latin1());
 
 	termination = "\r";
 	//termination = m_profile.readEntry("Termination");
@@ -235,13 +236,14 @@ QString Dialer::receive()
 			for(int i = 0; i < ret; i++)
 				buffer[i] = buffer[i] & 0x7F;
 			buffer[ret] = 0;
-qWarning("Got: '%s'", buffer);
+			//qWarning("Got: '%s'", buffer);
 			buf.append(QString(buffer));
 			if(buf.contains("OK") || buf.contains("ERROR") || buf.contains("CONNECT") || (buf.contains("BUSY")))
-{
-qWarning("Receiving: '%s'", buf.latin1());
+			{
+				//qWarning("Receiving: '%s'", buf.latin1());
+				cleanshutdown = 1;
 				return buf;
-}
+			}
 		}
 		else if(ret < 0)
 		{
@@ -249,8 +251,11 @@ qWarning("Receiving: '%s'", buf.latin1());
 			else if(!(counter++ % 100)) qApp->processEvents();
 		}
 		else if(!(counter++ % 100)) qApp->processEvents();
+
+		if(usercancel) return QString::null;
 	}
 
+	cleanshutdown = 1;
 	return QString::null;
 }
 
diff --git a/noncore/apps/opie-console/dialer.h b/noncore/apps/opie-console/dialer.h
index 84444b9..28303f3 100644
--- a/noncore/apps/opie-console/dialer.h
+++ b/noncore/apps/opie-console/dialer.h
@@ -47,6 +47,7 @@ class Dialer : public QDialog
 		int usercancel;
 		const Profile& m_profile;
 		int m_fd;
+		int cleanshutdown;
 };
 
 #endif
diff --git a/noncore/apps/opie-console/io_modem.h b/noncore/apps/opie-console/io_modem.h
index 8453b95..1328706 100644
--- a/noncore/apps/opie-console/io_modem.h
+++ b/noncore/apps/opie-console/io_modem.h
@@ -13,17 +13,17 @@
 #define MODEM_DEFAULT_SBITS        1
 #define MODEM_DEFAULT_FLOW         0
 
-#define MODEM_DEFAULT_INIT_STRING  "~^M~ATZ^M~"
-#define MODEM_DEFAULT_RESET_STRING "~^M~ATZ^M~"
+#define MODEM_DEFAULT_INIT_STRING  "ATZ"
+#define MODEM_DEFAULT_RESET_STRING "ATZ~"
 #define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
-#define MODEM_DEFAULT_DIAL_SUFFIX1 "^M"
-#define MODEM_DEFAULT_DIAL_PREFIX2 "ATDP"
-#define MODEM_DEFAULT_DIAL_SUFFIX2 "^M"
-#define MODEM_DEFAULT_DIAL_PREFIX3 "ATX1DT"
-#define MODEM_DEFAULT_DIAL_SUFFIX3 ";X4D^M"
+#define MODEM_DEFAULT_DIAL_SUFFIX1 ""
+#define MODEM_DEFAULT_DIAL_PREFIX2 ""
+#define MODEM_DEFAULT_DIAL_SUFFIX2 ""
+#define MODEM_DEFAULT_DIAL_PREFIX3 ""
+#define MODEM_DEFAULT_DIAL_SUFFIX3 ""
 #define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
-#define MODEM_DEFAULT_HANGUP_STRING "~~+++~~ATH^M"
-#define MODEM_DEFAULT_CANCEL_STRING "^M"
+#define MODEM_DEFAULT_HANGUP_STRING "+++ATH"
+#define MODEM_DEFAULT_CANCEL_STRING ""
 #define MODEM_DEFAULT_DIAL_TIME     45
 #define MODEM_DEFAULT_DELAY_REDIAL  2
 #define MODEM_DEFAULT_NUMBER_TRIES  10