start_sniff

6 files changed, 134 insertions, 33 deletions

diff --git a/noncore/net/wellenreiter/daemon/source/daemon.cc b/noncore/net/wellenreiter/daemon/source/daemon.cc
index 3a28217..b840f17 100644
--- a/noncore/net/wellenreiter/daemon/source/daemon.cc
+++ b/noncore/net/wellenreiter/daemon/source/daemon.cc
@@ -11,6 +11,7 @@
 #define MAXCHANNEL 13
 #define CHANINTERVAL 500000
 
+
 /* Main function of wellenreiterd */
 int main(int argc, char **argv)
 {
@@ -18,7 +19,7 @@ int main(int argc, char **argv)
   char buffer[WL_SOCKBUF];
   struct pcap_pkthdr header;
   struct sockaddr_in saddr;
-  pcap_t *handletopcap;
+//  pcap_t *handletopcap;
   wl_cardtype_t cardtype;
   pthread_t sub;
   const unsigned char *packet;
@@ -40,26 +41,14 @@ int main(int argc, char **argv)
   if(cardtype.type < 1 || cardtype.type > 4)
     usage();
 
-  /* set card into monitor mode */
-  if(!card_into_monitormode(&handletopcap, cardtype.iface, 
-			    cardtype.type))
-  {
-    wl_logerr("Cannot initialize the wireless-card, aborting");
-    exit(EXIT_FAILURE);
-  }
-  wl_loginfo("Set card into monitor mode");
-
-  /* setup pcap */
-  if((handletopcap = pcap_open_live(cardtype.iface, 
-				    BUFSIZ, 1, 0, NULL)) == NULL)
+  /* Until we do not act as a read daemon, it starts the sniffer 
+     right after startup */
+  if (!start_sniffer(cardtype.iface,cardtype.type))
   {
-    wl_logerr("pcap_open_live() failed: %s", strerror(errno));
+  	wl_logerr("daemon, start_sniff did not return proper, aborting");
     exit(EXIT_FAILURE);
   }
-  
-#ifdef HAVE_PCAP_NONBLOCK
-  pcap_setnonblock(handletopcap, 1, NULL);
-#endif
+  wl_loginfo ("daemon, wireless card prepared for sniffing");
   
   /* Setup socket for incoming commands */
   if((sock=wl_setupsock(DAEMONADDR, DAEMONPORT, saddr)) < 0)
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
index 7c9fbc4..4f187c0 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
+++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
@@ -6,9 +6,9 @@
 
 #include "cardmode.hh"
 #include "wl_log.hh"
-
+pcap_t *handletopcap;
 /* main card into monitor function */
-int card_into_monitormode (pcap_t **orighandle, const char *device, int cardtype)
+int card_into_monitormode (const char *device, int cardtype)
 {
   char CiscoRFMON[35] = "/proc/driver/aironet/";
   FILE *CISCO_CONFIG_FILE;
@@ -152,6 +152,51 @@ int card_check_rfmon_datalink (const char *device)
   }
 }
 
+/* Ipaq running familiar does not have a loopback device, we need one */
+int check_loopback()
+{
+    /* Checking for a loopback interface with 127.0.0.1, otherwise the other stuff seems to fail on
+     familiar linux on ipaq's */
+    int err;
+    /* First generate a socket to use with iocalls */
+    int fd = socket(AF_INET, SOCK_DGRAM, 0);
+    if (fd < 0)
+    {
+        /* In case of an error */
+        wl_logerr("check_loopback, generation of a socket failed, cannot continue");
+        return 0;
+    }
+    /* Fill an empty an interface structure with the right flags (UP and Promsic) */
+    struct ifreq ifr;
+    strncpy(ifr.ifr_name, "lo",3);
+
+	/* Get the interface flags, loopback interfaces can be detected that way */
+    err = ioctl(fd, SIOCGIFFLAGS, &ifr);
+    if (err < 0)
+    {
+        wl_logerr("check_loopback, could not get the flags of lo, check if you got a lo loopback interface, cannot continue");
+    	close(fd);
+        return 0;
+    }
+	/* Checking the flags for IFF_LOOPBACK flags */
+    if(ifr.ifr_flags && IFF_LOOPBACK)
+    {
+    	/* Yes, we do have a loopback interface....sup! */
+    	close(fd);
+        wl_loginfo ("check_loopback, check for loopback interface lo successful");
+        return 1;
+    }
+    else
+    {
+		wl_logerr("check_loopback, did not found an interface lo with the IFF_LOOPBACK flag set, cannot continue");
+		close(fd);
+        return 0;
+    }
+	/* Should never be reached */
+	return 0;
+} /*check_loopback */
+
+
 /* Set card into promisc mode */
 int card_set_promisc_up (const char *device)
 {
@@ -215,16 +260,6 @@ int card_remove_promisc (const char *device)
 
     /* Fill an empty an interface structure with the right flags (UP and Promsic) */
     struct ifreq ifr;
-/*    strncpy(ifr.ifr_name, device,10);
-    ifr.ifr_flags = IFF_UP + IFF_PROMISC;
-    err = ioctl(fd, SIOCSIFFLAGS, &ifr);
-    if (err < 0)
-    {
-    	perror("Could not access the interface, ");
-    	close(fd);
-        return 0;
-    }
-  */  
     /* Get the flags from the interface*/
     strncpy(ifr.ifr_name, device,10);
     err = ioctl(fd, SIOCGIFFLAGS, &ifr);
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
index 58e99ac..73e0ae1 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
+++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
@@ -38,6 +38,8 @@ extern "C"
 #include <pcap.h>  
 }
 
+extern pcap_t *handletopcap;
+
 /* Defines, used for the card setup */
 #define   DEFAULT_PATH       "/proc/driver/aironet/%s/Config"
 #define   CISCO_STATUS       "/proc/driver/aironet/%s/Status"
@@ -58,7 +60,8 @@ extern "C"
 
 /* Prototypes */
 int card_check_rfmon_datalink (const char *device);
-int card_into_monitormode (pcap_t **, const char *, int);
+int card_into_monitormode (const char *, int);
+int check_loopback();
 int card_set_promisc_up (const char *device);
 int card_remove_promisc (const char *device);
 int card_set_channel (const char *device, int channel,int cardtype); 
@@ -67,7 +70,6 @@ double iw_freq2float(iw_freq * in);
 void iw_float2freq(double in, iw_freq *	out);
 int card_detect_channels (char * device);
 
-
 /*------------------------------------------------------------------*/
 /*
  * Wrapper to push some Wireless Parameter in the driver
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc b/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc
index 6e512c4..0616a7e 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc
+++ b/noncore/net/wellenreiter/libwellenreiter/source/sniff.cc
@@ -10,6 +10,77 @@
 #include "wl_log.hh"
 #include "wl_types.hh"
 #include "wl_proto.hh"
+#include "cardmode.hh"
+
+int start_sniffer(const char *device, int cardtype )
+{
+	
+	/* This function initialize the sniffing
+	   1. Check for lo interface
+	   2. bring it into promsicous mode and UP
+	   3. bring device into rfmon mode
+	   start the pcap sniffing process.
+	  */
+
+  	/* Do we have the device name ? */
+	  if(device == NULL)
+ 	 {
+  	    wl_logerr("start_sniffer, parameter \"device\" is empty, please check your config");
+   	   return 0;
+  	}
+	
+	/* Some Linux System does not have a loopback device lo with 127.0.0.1 so sockets could 
+	   not made correctly, let the proggie check that and proceed only if it exists. */
+	if (!check_loopback())
+	{
+		wl_logerr("start_sniffer, check_loopback failed, cannot continue without a loopback");
+		return 0;
+	}
+
+	/* Set the card into regulary promiscous mode first and set the UP flag, in case no ip 
+	   was given. It would work without the promisc flags but i dont like this */
+	if (!card_set_promisc_up(device))
+        {
+    		wl_logerr("start_sniffer, card_set_promisc_up failed, cannot continue");
+    		return 0;
+    	} 
+
+	/* Set card into the rfmon/monitoring mode */
+	if (!card_into_monitormode(device,cardtype))
+    {
+	    wl_logerr("start_sniffer, cannot put wireless card into monitoring mode, aborting");
+		return 0;
+	}
+
+    /* setup pcap handle, used for the packet decoding etc. */
+    if((handletopcap = pcap_open_live((char *) device, BUFSIZ, 1, 0, NULL)) == NULL)
+    {
+    	wl_logerr("pcap_open_live() failed: %s", strerror(errno));
+    	return 0;
+    }
+  
+#ifdef HAVE_PCAP_NONBLOCK
+  pcap_setnonblock(handletopcap, 1, NULL);
+#endif
+	return 1;
+}
+
+
+int stop_sniffer(const char *device, int cardtype)
+{
+	/* This function terminates the sniffing 
+	   1. get the device state
+	   2. remove the rfmon state
+	   3. Remove the promisc state
+	   start the pcap sniffing process.
+	   
+	  */
+
+	/* Do we really have at least a lo interface with the 127.0.0.1 ? */
+	return 0;	
+
+}
+
 
 /* Main function, checks packets */
 void process_packets(const struct pcap_pkthdr *pkthdr, 
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh b/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh
index c7108ac..a4cf4b7 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh
+++ b/noncore/net/wellenreiter/libwellenreiter/source/sniff.hh
@@ -40,11 +40,14 @@ struct packetinfo
   int ssid_len;
 };
 
+/* Function definitions  */
+/* Used for stoping and starting the sniffer process */
+int start_sniffer(const char *device, int cardtype);
+int stop_sniffer(const char *device, int cardtype);
 void process_packets(const struct pcap_pkthdr* pkthdr,const u_char* packet, char *, int);
 int decode_80211b_hdr(const u_char *p,struct packetinfo *ppinfo);
 void etheraddr_string(register const u_char *ep,char * text);
 int handle_beacon(u_int16_t fc, const u_char *p,struct packetinfo *ppinfo);
-
 int GetHeaderLength(u_int16_t fc);
 
 /*
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh b/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh
index cd482fe..afc105c 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh
+++ b/noncore/net/wellenreiter/libwellenreiter/source/wl_types.hh
@@ -38,5 +38,6 @@ typedef struct {
 #define WL_CONFFILE "sample.conf"
 #define WL_CONFBUFF 128
 
+
 #endif /* WL_TYPES_HH */