Added manually created files not taken care of by the Makefile

6 files changed, 831 insertions, 42 deletions

diff --git a/i18n/lv/camera.ts b/i18n/lv/camera.ts
new file mode 100644
index 0000000..6f1acc7
--- a/dev/null
+++ b/i18n/lv/camera.ts
@@ -0,0 +1,13 @@
+<!DOCTYPE TS><TS>
+<context>
+    <name>CameraMainWindow</name>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Text</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+</TS>
diff --git a/i18n/lv/libcamera.ts b/i18n/lv/libcamera.ts
new file mode 100644
index 0000000..4eb9e18
--- a/dev/null
+++ b/i18n/lv/libcamera.ts
@@ -0,0 +1,2 @@
+<!DOCTYPE TS><TS>
+</TS>
diff --git a/i18n/lv/libkppp.ts b/i18n/lv/libkppp.ts
index 2bf0fcd..ea4fc5b 100644
--- a/i18n/lv/libkppp.ts
+++ b/i18n/lv/libkppp.ts
@@ -1,1270 +1,1270 @@
 <!DOCTYPE TS><TS>
 <context>
     <name>AccountWidget</name>
     <message>
         <source>Allows you to modify the selected account</source>
         <translation>Ļauj jums labot iezīmēto kontu</translation>
     </message>
     <message>
         <source>Create a new dialup connection
 to the Internet</source>
         <translation>Izveidot jaunu iezvana pieslēgumu
 internetam</translation>
     </message>
     <message>
         <source>Makes a copy of the selected account. All
 settings of the selected account are copied
 to a new account, that you can modify to fit your
 needs</source>
         <translation>Izveido kopiju no iezīmēta konta.  Visi
 iezīmētā konta uzstādījumi tiek kopēti uz
 jauno kontu, lai jūs varētu to pielabot
 savām vajadzībām</translation>
     </message>
     <message>
         <source>&lt;p&gt;Deletes the selected account
 
 &lt;font color=&quot;red&quot;&gt;&lt;b&gt;Use with care!&lt;/b&gt;&lt;/font&gt;</source>
         <translation>&lt;p&gt;Dzēš iezīmēto kontu
 
 &lt;font color=&quot;red&quot;&gt;&lt;b&gt;Lietot uzmanīgi!&lt;/b&gt;&lt;/font&gt;</translation>
     </message>
     <message>
         <source>No account selected.</source>
         <translation>Nav izvēlēts konts.</translation>
     </message>
     <message>
         <source>Are you sure you want to delete
 the account &quot;%1&quot;?</source>
         <translation>Vai tiešām dzēst kontu
 &quot;%1&quot;?</translation>
     </message>
     <message>
         <source>Confirm</source>
         <translation>Apstiprināt</translation>
     </message>
     <message>
         <source>New Account</source>
         <translation>Jauns Konts</translation>
     </message>
     <message>
         <source>Edit Account: </source>
         <translation>Labot Kontu:</translation>
     </message>
     <message>
         <source>Dial</source>
         <translation>Zvanīt</translation>
     </message>
     <message>
         <source>Edit Login Script</source>
         <translation>Labot Pieslēguma Skriptu</translation>
     </message>
     <message>
         <source>Authentication</source>
         <translation>Autentifikācija</translation>
     </message>
     <message>
         <source>IP Setup</source>
         <translation>IP Uzstādījumi</translation>
     </message>
     <message>
         <source>IP</source>
         <translation>IP</translation>
     </message>
     <message>
         <source>Gateway Setup</source>
         <translation>Vārtejas Konfigurācija</translation>
     </message>
     <message>
         <source>Gateway</source>
         <translation>Vārteja</translation>
     </message>
     <message>
         <source>DNS Servers</source>
         <translation>DNS Serveri</translation>
     </message>
     <message>
         <source>DNS</source>
         <translation>DNS</translation>
     </message>
     <message>
         <source>Execute Programs</source>
         <translation>Palaist Programmas</translation>
     </message>
     <message>
         <source>Execute</source>
         <translation>Palaist</translation>
     </message>
     <message>
         <source>You must enter a unique account name</source>
         <translation>Jums jāievada unikāls konta vārds</translation>
     </message>
 </context>
 <context>
     <name>AuthWidget</name>
     <message>
         <source>Authentication: </source>
         <translation>Autentifikācija:</translation>
     </message>
     <message>
         <source>Script-based</source>
         <translation>Skriptu-bāzēta</translation>
     </message>
     <message>
         <source>PAP</source>
         <translation>PAP</translation>
     </message>
     <message>
         <source>Terminal-based</source>
         <translation>Termināl-bāzēta</translation>
     </message>
     <message>
         <source>CHAP</source>
         <translation>CHAP</translation>
     </message>
     <message>
         <source>PAP/CHAP</source>
         <translation>PAP/CHAP</translation>
     </message>
     <message>
         <source>&lt;p&gt;Specifies the method used to identify yourself to
 the PPP server. Most universities still use
 &lt;b&gt;Terminal&lt;/b&gt;- or &lt;b&gt;Script&lt;/b&gt;-based authentication,
 while most ISP use &lt;b&gt;PAP&lt;/b&gt; and/or &lt;b&gt;CHAP&lt;/b&gt;. If
 unsure, contact your ISP.
 
 If you can choose between PAP and CHAP,
 choose CHAP, because it&apos;s much safer. If you don&apos;t know
 whether PAP or CHAP is right, choose PAP/CHAP.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Username: </source>
         <translation>Lietotājs:</translation>
     </message>
     <message>
         <source>Enter your username here...</source>
         <translation>Ievadiet lietotāja vārdu...</translation>
     </message>
     <message>
         <source>Password: </source>
         <translation>Parole:</translation>
     </message>
     <message>
         <source>Enter your password here</source>
         <translation>Ievadiet paroli</translation>
     </message>
     <message>
         <source>Store password</source>
         <translation>Saglabāt paroli</translation>
     </message>
     <message>
         <source>&lt;p&gt;When this is turned on, your ISP password
 will be saved in &lt;i&gt;kppp&lt;/i&gt;&apos;s config file, so
 you do not need to type it in every time.
 
 &lt;b&gt;&lt;font color=&quot;red&quot;&gt;Warning:&lt;/font&gt; your password will be stored as
 plain text in the config file, which is
 readable only to you. Make sure nobody
 gains access to this file!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>error</source>
         <translation>kļūda</translation>
     </message>
     <message>
         <source>&lt;qt&gt;Login script has unbalanced loop Start/End&lt;qt&gt;</source>
         <translation>&lt;qt&gt;Pieslēguma skriptam ir nebalansēts Starta/Beigu cikls&lt;qt&gt;</translation>
     </message>
 </context>
 <context>
     <name>ChooserWidget</name>
     <message>
         <source>&amp;Edit...</source>
         <translation>&amp;Labot...</translation>
     </message>
     <message>
         <source>&amp;New...</source>
         <translation>&amp;Jauns...</translation>
     </message>
     <message>
         <source>Co&amp;py</source>
         <translation>&amp;Kopēt</translation>
     </message>
     <message>
         <source>De&amp;lete</source>
         <translation>&amp;Dzēst</translation>
     </message>
 </context>
 <context>
     <name>DNSWidget</name>
     <message>
         <source>Domain name:</source>
         <translation>Domaina vārds:</translation>
     </message>
     <message>
         <source>If you enter a domain name here, this domain
 name is used for your computer while you are
 connected. When the connection is closed, the
 original domain name of your computer is
 restored.
 
 If you leave this field blank, no changes are
 made to the domain name.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Configuration:</source>
         <translation>Konfigurācija:</translation>
     </message>
     <message>
         <source>Automatic</source>
         <translation>Automātiski</translation>
     </message>
     <message>
         <source>Manual</source>
         <translation>Manuāla</translation>
     </message>
     <message>
         <source>DNS IP address:</source>
         <translation>DNS IP adrese:</translation>
     </message>
     <message>
         <source>&lt;p&gt;Allows you to specify a new DNS server to be
 used while you are connected. When the
 connection is closed, this DNS entry will be
 removed again.
 
 To add a DNS server, type in the IP address of
 the DNS server here and click on &lt;b&gt;Add&lt;/b&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Add</source>
         <translation>Pievienot</translation>
     </message>
     <message>
         <source>Click this button to add the DNS server
 specified in the field above. The entry
 will then be added to the list below</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Remove</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Click this button to remove the selected DNS
 server entry from the list below</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>DNS address list:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;This shows all defined DNS servers to use
 while you are connected. Use the &lt;b&gt;Add&lt;/b&gt; and
 &lt;b&gt;Remove&lt;/b&gt; buttons to modify the list</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Disable DNS servers during connection</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;When this option is selected, all DNS
 servers specified in &lt;tt&gt;/etc/resolv.conf&lt;/tt&gt; are
 temporary disabled while the dialup connection
 is established. After the connection is
 closed, the servers will be re-enabled
 
 Typically, there is no reason to use this
 option, but it may become useful under 
 some circumstances.</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>DevicesWidget</name>
     <message>
         <source>Allows you to modify the selected device</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Create a new device</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Makes a copy of the selected device. All
 settings of the selected device are copied
 to a new device, that you can modify to fit your
 needs</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Deletes the selected device
 
 &lt;font color=&quot;red&quot;&gt;&lt;b&gt;Use with care!&lt;/b&gt;&lt;/font&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No devices selected.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Are you sure you want to delete
 the device &quot;%1&quot;?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Confirm</source>
-        <translation type="unfinished"></translation>
+        <translation type="unfinished">Apstiprināt</translation>
     </message>
     <message>
         <source>New Device</source>
         <translation>Jauna Iekārta</translation>
     </message>
     <message>
         <source>Edit Device: </source>
         <translation>Labot Iekārtu:</translation>
     </message>
     <message>
         <source>&amp;Device</source>
         <translation>&amp;Iekārta</translation>
     </message>
     <message>
         <source>&amp;Modem</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You must enter a unique device name</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>DialWidget</name>
     <message>
         <source>Connection name:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Type in a unique name for this connection</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Phone number:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Add...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Remove</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Specifies the phone numbers to dial. You
 can supply multiple numbers here, simply
 click on &quot;Add&quot;. You can arrange the
 order the numbers are tried by using the
 arrow buttons.
 
 When a number is busy or fails, &lt;i&gt;kppp&lt;/i&gt; will 
 try the next number and so on</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Customize pppd Arguments...</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ExecWidget</name>
     <message>
         <source>Here you can select commands to run at certain stages of the connection. The commands are run with your real user id, so you cannot run any commands here requiring root permissions (unless, of course, you are root).&lt;br&gt;&lt;br&gt;Be sure to supply the whole path to the program otherwise we might be unable to find it.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Before connect:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Allows you to run a program &lt;b&gt;before&lt;/b&gt; a connection
 is established. It is called immediately before
 dialing has begun.
 
 This might be useful, e.g. to stop HylaFAX blocking the
 modem.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Upon connect:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Allows you to run a program &lt;b&gt;after&lt;/b&gt; a connection
 is established. When your program is called, all
 preparations for an Internet connection are finished.
 
 Very useful for fetching mail and news</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Before disconnect:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Allows you to run a program &lt;b&gt;before&lt;/b&gt; a connection
 is closed. The connection will stay open until
 the program exits.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Upon disconnect:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Allows you to run a program &lt;b&gt;after&lt;/b&gt; a connection
 has been closed.</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>GatewayWidget</name>
     <message>
         <source>Configuration</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Default gateway</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>This makes the PPP peer computer (the computer
 you are connected to with your modem) to act as
 a gateway. Your computer will send all packets not
 going to a computer inside your local net to this
 computer, which will route these packets.
 
 This is the default for most ISPs, so you should
 probably leave this option on.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Static gateway</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Allows you to specify which computer you want
 to use as gateway (see &lt;i&gt;Default Gateway&lt;/i&gt; above)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Gateway IP address:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Assign the default route to this gateway</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>If this option is enabled, all packets not
 going to the local net are routed through
 the PPP connection.
 
 Normally, you should turn this on</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>IPWidget</name>
     <message>
         <source>Configuration</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dynamic IP address</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Select this option when your computer gets an
 internet address (IP) every time a
 connection is made.
 
 Almost every Internet Service Provider uses
 this method, so this should be turned on.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Static IP address</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Select this option when your computer has a
 fixed internet address (IP). Most computers
 don&apos;t have this, so you should probably select
 dynamic IP addressing unless you know what you
 are doing.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>IP address:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>If your computer has a permanent internet
 address, you must supply your IP address here.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Subnet mask:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;If your computer has a static Internet address,
 you must supply a network mask here. In almost
 all cases this netmask will be &lt;b&gt;255.255.255.0&lt;/b&gt;,
 but your mileage may vary.
 
 If unsure, contact your Internet Service Provider</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Auto-configure hostname from this IP</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Whenever you connect, this reconfigures
 your hostname to match the IP address you
 got from the PPP server. This may be useful
 if you need to use a protocol which depends
 on this information, but it can also cause several
 &lt;a href=&quot;kppp-7.html#autohostname&quot;&gt;problems&lt;/a&gt;.
 
 Don&apos;t enable this unless you really need it.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Selecting this option might cause some weird problems with the X-server and applications while kppp is connected. Don&apos;t use it until you know what you are doing!
 For more information take a look at the handbook (or help) in the section &quot;Frequently asked questions&quot;.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Warning</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>InterfacePPP</name>
     <message>
         <source>No password</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Username defined but no password
  Please enter a password</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Error</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ModemTransfer</name>
     <message>
         <source>Error</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ModemWidget</name>
     <message>
         <source>Modem &amp;name:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem de&amp;vice:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>This specifies the serial port your modem is attached 
 to. On Linux/x86, typically this is either /dev/ttyS0 
 (COM1 under DOS) or /dev/ttyS1 (COM2 under DOS).
 
 If you have an internal ISDN card with AT command
 emulation (most cards under Linux support this), you
 should select one of the /dev/ttyIx devices.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Flow control:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hardware [CRTSCTS]</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Software [XON/XOFF]</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>None</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Specifies how the serial port and modem
 communicate. You should not change this unless
 you know what you are doing.
 
 &lt;b&gt;Default&lt;/b&gt;: CRTSCTS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Line termination:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Specifies how AT commands are sent to your
 modem. Most modems will work fine with the
 default &lt;i&gt;CR/LF&lt;/i&gt;. If your modem does not react
 to the init string, you should try different
 settings here
 
 &lt;b&gt;Default&lt;/b&gt;: CR/LF</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Co&amp;nnection speed:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Specifies the speed your modem and the serial
 port talk to each other. You should begin with
 the default of 38400 bits/sec. If everything
 works you can try to increase this value, but to
 no more than 115200 bits/sec (unless you know
 that your serial port supports higher speeds).</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Use lock file</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;To prevent other programs from accessing the
 modem while a connection is established, a
 file can be created to indicate that the modem
 is in use. On Linux an example file would be
 &lt;tt&gt;/var/lock/LCK..ttyS1&lt;/tt&gt;
 Here you can select whether this locking will
 be done.
 
 &lt;b&gt;Default&lt;/b&gt;: On</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem timeout:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source> sec</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>This specifies how long &lt;i&gt;kppp&lt;/i&gt; waits for a
 &lt;i&gt;CONNECT&lt;/i&gt; response from your modem. The
 recommended value is 30 seconds.</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ModemWidget2</name>
     <message>
         <source>&amp;Wait for dial tone before dialing</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Normally the modem waits for a dial tone
 from your phone line, indicating that it can
 start to dial a number. If your modem does not
 recognize this sound, or your local phone system
 does not emit such a tone, uncheck this option
 
 &lt;b&gt;Default:&lt;/b&gt;: On</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Busy wait:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source> sec</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Specifies the number of seconds to wait before
 redial if all dialed numbers are busy. This is
 necessary because some modems get stuck if the
 same number is busy too often.
 
 The default is 0 seconds, you should not change
 this unless you need to.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem &amp;volume:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Most modems have a speaker which makes
 a lot of noise when dialing. Here you can
 either turn this completely off or select a
 lower volume.
 
 If this does not work for your modem,
 you must modify the modem volume command.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem asserts CD line</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>This controls how &lt;i&gt;kppp&lt;/i&gt; detects that the modem
 is not responding. Unless you are having
 problems with this, do not modify this setting.
 
 &lt;b&gt;Default&lt;/b&gt;: Off</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Mod&amp;em Commands...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Allows you to change the AT command for
 your modem.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Query Modem...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Most modems support the ATI command set to
 find out vendor and revision of your modem.
 
 Press this button to query your modem for
 this information. It can be useful to help
 you setup the modem</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>PPPConfigWidget</name>
     <message>
         <source>Configure Modem</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem failure</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>A critical failure appeard while testing the modem</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Accounts</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Devices</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>PPPdArguments</name>
     <message>
         <source>Customize pppd Arguments</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Argument:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Add</source>
-        <translation type="unfinished"></translation>
+        <translation type="unfinished">Pievienot</translation>
     </message>
     <message>
         <source>Remove</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Defaults</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>PhoneNumberDialog</name>
     <message>
         <source>Add Phone Number</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Enter a phone number:</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>QObject</name>
     <message>
         <source>PPP</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>generic ppp device</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unable to open modem.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unable to detect state of CD line.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>The modem is not ready.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>The modem is busy.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Ready.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Can&apos;t restore tty settings: tcsetattr()
 </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>The modem does not respond.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unknown speed</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>ATI Query</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unable to create modem lock file.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Looking for modem...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Cancel</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Query timed out.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem device is locked.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Ready</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>One moment please...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Query Results</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Close</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You&apos;re not allowed to dial out with kppp.
 Contact your system administrator.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Cannot find the PPP daemon!
 Make sure that pppd is installed.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You do not have the permission to start pppd!
 Contact your system administrator and ask to get access to pppd.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You don&apos;t have sufficient permission to run
 %1
 Please make sure that kppp is owned by root and has the SUID bit set.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>%1 is missing or can&apos;t be read!
 Ask your system administrator to create this file (can be empty) with appropriate read and write permissions.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Edit Modem Commands</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Pre-init delay (sec/100):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Initialization string %1:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Post-init delay (sec/100):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dialing speed (sec/100):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Init response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No dial tone detection:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dial string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connect response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Busy response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No carrier response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No dial tone response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hangup string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hangup response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Answer string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Ring response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Answer response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Escape string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Escape response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Guard time (sec/50):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Volume off/low/high:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connected at:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Time connected:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Volume:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Session Bill:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Total Bill:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Disconnect</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Byte</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>KB</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>MB</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>GB</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connecting to: </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Online</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Offline</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Log</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connecting to: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Running pre-startup command...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Initializing modem...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Setting </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Setting speaker volume...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Turning off dial tone waiting...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dialing %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Line busy. Hanging up...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Line busy. Waiting: %1 seconds</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No Dialtone</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No Carrier</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Scanning %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Saving %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Sending %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Expecting %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Pause %1 seconds</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Timeout %1 seconds</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hangup</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Answer</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>ID %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Password %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Prompting %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>PW Prompt %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Loop Start %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>ERROR: Nested too deep, ignored.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Loops nested too deeply!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Loop End %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>LoopEnd without matching Start! Line: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Starting pppd...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Scan Var: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Found: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Looping: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Script timed out!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Scanning: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Expecting: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Logging on to network...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Running startup command...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Done</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>pppd command + command-line arguments exceed 2024 characters in length.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot find the PPP daemon!&lt;br&gt;Make sure that pppd is installed and that you have entered the correct path.&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot execute:&lt;br&gt; %1&lt;br&gt;Please make sure that you have given setuid permission and that pppd is executable.&lt;br&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot find:&lt;br&gt; %1&lt;br&gt;Please make sure you have setup your modem device properly and/or adjust the location of the modem device on the modem tab of the setup dialog.&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;You have selected the authentication method PAP or CHAP. This requires that you supply a username and a password!&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot create PAP/CHAP authentication&lt;br&gt;file &quot;%1&quot;&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You must specify a telephone number!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ScriptWidget</name>
     <message>
         <source>Add</source>
-        <translation type="unfinished"></translation>
+        <translation type="unfinished">Pievienot</translation>
     </message>
     <message>
         <source>Insert</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Remove</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 </TS>
diff --git a/i18n/lv/libwellenreiter.ts b/i18n/lv/libwellenreiter.ts
new file mode 100644
index 0000000..4eb9e18
--- a/dev/null
+++ b/i18n/lv/libwellenreiter.ts
@@ -0,0 +1,2 @@
+<!DOCTYPE TS><TS>
+</TS>
diff --git a/i18n/lv/libwlan.ts b/i18n/lv/libwlan.ts
index 37fdc29..c1f7877 100644
--- a/i18n/lv/libwlan.ts
+++ b/i18n/lv/libwlan.ts
@@ -1,153 +1,157 @@
 <!DOCTYPE TS><TS>
 <context>
     <name>AWLan</name>
-    <message>
-        <source>&lt;UseHostName&gt;</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>WLAN</name>
-</context>
-<context>
-    <name>WLanGUI</name>
     <message>
-        <source>Form1</source>
+        <source>Wireless Configuration</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>General</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
+        <source>any</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>SSID</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Infrastructure</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
         <source>Auto</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Managed</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Ad-Hoc</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Name</source>
+        <source>Mode</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Mode</source>
+        <source>Specify &amp;Access Point</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>ESS-ID</source>
+        <source>MAC</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;UseHostName&gt;</source>
+        <source>Specify &amp;Channel</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Specify Access Point</source>
+        <source>Rescan Neighbourhood</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>MAC</source>
+        <source>Chn</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Encryption</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Enable Encryption</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Key Setting</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Key &amp;1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Key &amp;4</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
         <source>Key &amp;2</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Key &amp;3</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Accept Non-Encrypted packets</source>
+        <source>Key &amp;4</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>State</source>
+        <source>Non-encrypted Packets</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>AP</source>
+        <source>&amp;Accept</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Rate</source>
+        <source>&amp;Reject</source>
         <translation type="unfinished"></translation>
     </message>
+</context>
+<context>
+    <name>WLanGUI</name>
+</context>
+<context>
+    <name>WLanNetNode</name>
+</context>
+<context>
+    <name>WlanInfo</name>
     <message>
-        <source>Channel</source>
+        <source>Interface Information</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Station</source>
+        <source>802.11b</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>ESSID</source>
+        <source>Channel</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Frequency</source>
+        <source>Mode</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Link Quality</source>
+        <source>ESSID</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Noise</source>
+        <source>Station</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Quality</source>
+        <source>AP</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Signal</source>
+        <source>Rate</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Live feed </source>
+        <source>Quality</source>
         <translation type="unfinished"></translation>
     </message>
-</context>
-<context>
-    <name>WLanNetNode</name>
     <message>
-        <source>WLan Device</source>
+        <source>Noise</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;p&gt;Configure Wi/Fi or WLan network cards.&lt;/p&gt;&lt;p&gt;Defines Wireless options for those cards&lt;/p&gt;</source>
+        <source>Signal</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
-<context>
-    <name>WlanInfo</name>
-</context>
 </TS>
diff --git a/i18n/lv/wellenreiter.ts b/i18n/lv/wellenreiter.ts
new file mode 100644
index 0000000..ae20a32
--- a/dev/null
+++ b/i18n/lv/wellenreiter.ts
@@ -0,0 +1,768 @@
+<!DOCTYPE TS><TS>
+<context>
+    <name>MScanListView</name>
+    <message>
+        <source>Net/Station</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>#</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>MAC</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Chn</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>W</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>T</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>IP</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Manufacturer</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>First Seen</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Last Seen</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Location</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>MStatWindow</name>
+    <message>
+        <source>Protocol</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Count</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>ProtocolListView</name>
+    <message>
+        <source>Protocol Family</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Perform Action</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>QObject</name>
+    <message>
+        <source>Wellenreiter: trying to run as non-root!</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>You have started Wellenreiter II
+as non-root. You will have
+only limited functionality.
+Proceed anyway?</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>You have a dhcp client running.
+(PID = %1)
+This can severly limit scanning!
+Should I kill it for you?</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Restart your dhcp client?</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>Wellenreiter</name>
+    <message>
+        <source>Your wireless card
+should now be usable again.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>No device configured.
+Please reconfigure!</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>The configured device (%1)
+is not available on this system
+. Please reconfigure!</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Can&apos;t bring interface &apos;%1&apos; up:
+</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;p&gt;The Wireless Extension Versions&lt;br&gt;are not matching!&lt;p&gt;  Wellenreiter II : WE V%1&lt;br&gt;Interface driver: WE V%2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Bring your device into
+monitor mode now.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Can&apos;t set interface &apos;%1&apos;
+into monitor mode:
+</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>
+Continue with limited functionality?</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Can&apos;t open packet capturer for
+&apos;%1&apos;:
+</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Wellenreiter II - replaying capture file...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Got packet with protocol &apos;%1&apos;</source>
+        <comment>Protocol Name</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Can&apos;t do that!</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>No wireless
+interface available.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Stop sniffing before
+joining a net.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Function only available on Embedded build</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>WellenreiterBase</name>
+    <message>
+        <source>Wellenreiter/Opie</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Wellenreiter/X11</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Nets</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Graph</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Log</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hex</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Stat</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>About</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Networks</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>WellenreiterConfigBase</name>
+    <message>
+        <source>Wellenreiter II COnfiguration Dialog</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Interface</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;select&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>cisco</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>wlan-ng</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>hostap</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>orinoco</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;manual&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;file&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Choose the type of driver used for sniffing.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Driver:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Choose the interface used for sniffing.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Name:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Perform Autodetection</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Retrigger the autodetection algorithm</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use additional PRISM header</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use additional PRISM headers, if available.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hop Channels</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check this, if you want to start a channel hopper.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>every</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source> ms</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Choose the channel hop interval.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use Adaptive(TM) Hop Scheme</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>An adaptive hopping interval dynamically changes the channel hopping parameters to listen longer on channels where traffic comes in.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Scan on channel</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check the channels which should be included in the channel hopping scheme. Note that due to the 802.11 channel overlay scheme you may receive data on neighbour channels of channels, even if they&apos;re not checked here.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>6</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>8</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>9</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>1</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>11</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>10</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>7</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>3</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>5</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>4</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>12</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>13</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>14</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Capture</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Browse</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Click to open a file requester to choose a capture file name.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Write Capture Files To</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check this to write an ethereal compatible capture file.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>/tmp/capture</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Configure the name of the capture file.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hex View Buffer</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>unlimited</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>limited to</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source> Packets</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parse</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>UI</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Lookup MAC vendor names</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check this to lookup MAC vendor names.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Open Tree On New Station</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check this to automatically make a tree visible when a new station is detected.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Disable Power Management</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check this to disable power management while scanning.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Action on detecting a new</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Wired Station:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Network:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;Ignore&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Play Alarm</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Play Click</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Blink LED</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Run Script</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Choose an action to perform when a new wireless station is detected.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>The command line to execute when a script action is performed.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Wireless Station:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Choose the action to perform when a new wired station is detected.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Choose an action to perform when a new network is detected.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Intrusion</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Link Level</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Fake Mac:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Send proble requests</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;automatic&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>44:44:44:44:44:44</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Try to authenticate</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enable active scanning</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>IP Level</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Request DHCP Address</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Fake IP:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>192.168.125.1</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>GPS</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Enable GPS logging w/ gpsd</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check this to log GPS coordinates.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Host</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>localhost</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hostadress where the gps daemon listens on.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>:</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Port number where the gps daemon listens on.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Start gpsd on localhost</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Check to start the GPS daemon on localhost.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>gpsd -p /dev/ttyS3 -s 4800</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Command line to start the gps daemon.</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>WellenreiterMainWindow</name>
+    <message>
+        <source>Click here to start scanning.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Click here to stop scanning.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Click here to open the configure dialog.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Click here to upload a capture session.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Session...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Text Log...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Hex Log...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;New</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Save</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Upload Session</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Exit</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Configure...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Start</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Sto&amp;p</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Expand All</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Collapse All</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Add something</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;File</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;View</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Sniffer</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Demo</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ready.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Configure</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>GPS said:
+%1</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>All</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Text</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Sniffing in progress!
+Please stop sniffing before closing.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Upload Session</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>From: </source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Location: </source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Comments: </source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Ok</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&amp;Cancel</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;p&gt;Logfile &apos;%1&apos; doesn&apos;t exist&lt;/p&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>&lt;p&gt;Can&apos;t open Logfile &apos;%1&apos;&lt;/p&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Success</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Capture Dump was uploaded to %1</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Connection to %1 failed</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+</TS>