NL 1.0 Translations update 15-9-03

1 files changed, 4 insertions, 4 deletions

diff --git a/i18n/nl/libkppp.ts b/i18n/nl/libkppp.ts
index ac23635..a460335 100644
--- a/i18n/nl/libkppp.ts
+++ b/i18n/nl/libkppp.ts
@@ -707,746 +707,746 @@ Don&apos;t enable this unless you really need it.</source>
 hostnaam in in overeenstemming met het van de
 PPP server verkregen IP adres. Dit kan handig
 zijn bij het gebruik van een protocol dat van deze
 informatie gebruik maakt, maar het kan ook 
 een aantal &lt;a href=&quot;kppp-7.html#autohostname&quot;&gt;problemen&lt;/a&gt; veroorzaken.
 
 Gebruik dit niet indien niet vereist.</translation>
     </message>
     <message>
         <source>Selecting this option might cause some weird problems with the X-server and applications while kppp is connected. Don&apos;t use it until you know what you are doing!
 For more information take a look at the handbook (or help) in the section &quot;Frequently asked questions&quot;.</source>
         <translation>Het selecteren van deze optie kan problemen veroorzaken met de X-server en programma&apos;s tijdens een kppp verbinding. Niet gebruiken indien niet specifiek vereist!
 Zie &quot;Frequently asked questions&quot; in het handboek(of help) voor meer informatie.</translation>
     </message>
     <message>
         <source>Warning</source>
         <translation>Waarschuwing</translation>
     </message>
 </context>
 <context>
     <name>InterfacePPP</name>
     <message>
         <source>No password</source>
         <translation>Geen wachtwoord</translation>
     </message>
     <message>
         <source>Username defined but no password
  Please enter a password</source>
         <translation>Gebruikersnaam gedefinieerd, maar
 geen wachtwoord. Voer wachtwoord in</translation>
     </message>
     <message>
         <source>Error</source>
         <translation>Fout</translation>
     </message>
 </context>
 <context>
     <name>ModemTransfer</name>
     <message>
         <source>Error</source>
         <translation>Fout</translation>
     </message>
 </context>
 <context>
     <name>ModemWidget</name>
     <message>
         <source>Modem &amp;name:</source>
         <translation>Modem&amp;naam:</translation>
     </message>
     <message>
         <source>Modem de&amp;vice:</source>
         <translation>Modema&amp;pparaat:</translation>
     </message>
     <message>
         <source>This specifies the serial port your modem is attached 
 to. On Linux/x86, typically this is either /dev/ttyS0 
 (COM1 under DOS) or /dev/ttyS1 (COM2 under DOS).
 
 If you have an internal ISDN card with AT command
 emulation (most cards under Linux support this), you
 should select one of the /dev/ttyIx devices.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Flow control:</source>
         <translation>&amp;Flow control:</translation>
     </message>
     <message>
         <source>Hardware [CRTSCTS]</source>
         <translation>Hardware [CRTSCTS]</translation>
     </message>
     <message>
         <source>Software [XON/XOFF]</source>
         <translation>Software [XON/XOFF]</translation>
     </message>
     <message>
         <source>None</source>
         <translation>Geen</translation>
     </message>
     <message>
         <source>&lt;p&gt;Specifies how the serial port and modem
 communicate. You should not change this unless
 you know what you are doing.
 
 &lt;b&gt;Default&lt;/b&gt;: CRTSCTS</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Line termination:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;p&gt;Specifies how AT commands are sent to your
 modem. Most modems will work fine with the
 default &lt;i&gt;CR/LF&lt;/i&gt;. If your modem does not react
 to the init string, you should try different
 settings here
 
 &lt;b&gt;Default&lt;/b&gt;: CR/LF</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Co&amp;nnection speed:</source>
         <translation>Verbi&amp;ndingssnelheid:</translation>
     </message>
     <message>
         <source>Specifies the speed your modem and the serial
 port talk to each other. You should begin with
 the default of 38400 bits/sec. If everything
 works you can try to increase this value, but to
 no more than 115200 bits/sec (unless you know
 that your serial port supports higher speeds).</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Use lock file</source>
         <translation>Gebr&amp;uik lock file</translation>
     </message>
     <message>
         <source>&lt;p&gt;To prevent other programs from accessing the
 modem while a connection is established, a
 file can be created to indicate that the modem
 is in use. On Linux an example file would be
 &lt;tt&gt;/var/lock/LCK..ttyS1&lt;/tt&gt;
 Here you can select whether this locking will
 be done.
 
 &lt;b&gt;Default&lt;/b&gt;: On</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem timeout:</source>
         <translation>Modem timeout:</translation>
     </message>
     <message>
         <source> sec</source>
         <translation>sec</translation>
     </message>
     <message>
         <source>This specifies how long &lt;i&gt;kppp&lt;/i&gt; waits for a
 &lt;i&gt;CONNECT&lt;/i&gt; response from your modem. The
 recommended value is 30 seconds.</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>ModemWidget2</name>
     <message>
         <source>Busy wait:</source>
         <translation>Wachttijd bij bezet:</translation>
     </message>
     <message>
         <source>&amp;Wait for dial tone before dialing</source>
         <translation>&amp;Wacht op kiestoon voor kiezen</translation>
     </message>
     <message>
         <source>&lt;p&gt;Normally the modem waits for a dial tone
 from your phone line, indicating that it can
 start to dial a number. If your modem does not
 recognize this sound, or your local phone system
 does not emit such a tone, uncheck this option
 
 &lt;b&gt;Default:&lt;/b&gt;: On</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source> sec</source>
         <translation>sec</translation>
     </message>
     <message>
         <source>Specifies the number of seconds to wait before
 redial if all dialed numbers are busy. This is
 necessary because some modems get stuck if the
 same number is busy too often.
 
 The default is 0 seconds, you should not change
 this unless you need to.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem &amp;volume:</source>
         <translation>Modem &amp;volume:</translation>
     </message>
     <message>
         <source>Most modems have a speaker which makes
 a lot of noise when dialing. Here you can
 either turn this completely off or select a
 lower volume.
 
 If this does not work for your modem,
 you must modify the modem volume command.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem asserts CD line</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>This controls how &lt;i&gt;kppp&lt;/i&gt; detects that the modem
 is not responding. Unless you are having
 problems with this, do not modify this setting.
 
 &lt;b&gt;Default&lt;/b&gt;: Off</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Mod&amp;em Commands...</source>
         <translation>Mo&amp;demcommando&apos;s...</translation>
     </message>
     <message>
         <source>Allows you to change the AT command for
 your modem.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&amp;Query Modem...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Most modems support the ATI command set to
 find out vendor and revision of your modem.
 
 Press this button to query your modem for
 this information. It can be useful to help
 you setup the modem</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>PPPConfigWidget</name>
     <message>
         <source>Configure Modem</source>
         <translation>Configureer modem</translation>
     </message>
     <message>
         <source>Modem failure</source>
         <translation>Modemfalen</translation>
     </message>
     <message>
         <source>A critical failure appeard while testing the modem</source>
         <translation>Een kritieke fout trad op bij modemtest</translation>
     </message>
     <message>
         <source>&amp;Accounts</source>
         <translation>&amp;Verbindingen</translation>
     </message>
     <message>
         <source>&amp;Device</source>
         <translation type="obsolete">&amp;Apparaat</translation>
     </message>
     <message>
         <source>&amp;Modem</source>
         <translation type="obsolete">&amp;Modem</translation>
     </message>
     <message>
         <source>&amp;Devices</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Apparaten</translation>
     </message>
 </context>
 <context>
     <name>PPPdArguments</name>
     <message>
         <source>Customize pppd Arguments</source>
         <translation>Wijzig pppd functies</translation>
     </message>
     <message>
         <source>Argument:</source>
         <translation>Functie:</translation>
     </message>
     <message>
         <source>Add</source>
         <translation>Toevoegen</translation>
     </message>
     <message>
         <source>Remove</source>
         <translation>Verwijder</translation>
     </message>
     <message>
         <source>Defaults</source>
         <translation>Standaardinstelling</translation>
     </message>
 </context>
 <context>
     <name>PhoneNumberDialog</name>
     <message>
         <source>Add Phone Number</source>
         <translation>Telefoonummer toevoegen</translation>
     </message>
     <message>
         <source>Enter a phone number:</source>
         <translation>Voer telefoonnummer in:</translation>
     </message>
 </context>
 <context>
     <name>QObject</name>
     <message>
         <source>PPP</source>
         <translation>PPP</translation>
     </message>
     <message>
         <source>generic ppp device</source>
         <translation>generiek ppp apparaat</translation>
     </message>
     <message>
         <source>Unable to open modem.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unable to detect state of CD line.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>The modem is not ready.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>The modem is busy.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Ready.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Can&apos;t restore tty settings: tcsetattr()
 </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>The modem does not respond.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unknown speed</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>ATI Query</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Unable to create modem lock file.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Looking for modem...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Cancel</source>
-        <translation type="unfinished"></translation>
+        <translation>Annuleer</translation>
     </message>
     <message>
         <source>Modem Query timed out.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem device is locked.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Ready</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>One moment please...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Modem Query Results</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Close</source>
-        <translation type="unfinished"></translation>
+        <translation>Sluit</translation>
     </message>
     <message>
         <source>You&apos;re not allowed to dial out with kppp.
 Contact your system administrator.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Cannot find the PPP daemon!
 Make sure that pppd is installed.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You do not have the permission to start pppd!
 Contact your system administrator and ask to get access to pppd.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You don&apos;t have sufficient permission to run
 %1
 Please make sure that kppp is owned by root and has the SUID bit set.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>%1 is missing or can&apos;t be read!
 Ask your system administrator to create this file (can be empty) with appropriate read and write permissions.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Edit Modem Commands</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Pre-init delay (sec/100):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Initialization string %1:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Post-init delay (sec/100):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dialing speed (sec/100):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Init response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No dial tone detection:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dial string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connect response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Busy response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No carrier response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No dial tone response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hangup string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hangup response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Answer string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Ring response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Answer response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Escape string:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Escape response:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Guard time (sec/50):</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Volume off/low/high:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connected at:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Time connected:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Volume:</source>
-        <translation type="unfinished"></translation>
+        <translation>Volume:</translation>
     </message>
     <message>
         <source>Session Bill:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Total Bill:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Disconnect</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Byte</source>
         <translation>Byte</translation>
     </message>
     <message>
         <source>KB</source>
         <translation>KB</translation>
     </message>
     <message>
         <source>MB</source>
         <translation>MB</translation>
     </message>
     <message>
         <source>GB</source>
         <translation>GB</translation>
     </message>
     <message>
         <source>Connecting to: </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Online</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Offline</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Log</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Connecting to: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Running pre-startup command...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Initializing modem...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Setting </source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Setting speaker volume...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Turning off dial tone waiting...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Dialing %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Line busy. Hanging up...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Line busy. Waiting: %1 seconds</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No Dialtone</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>No Carrier</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Scanning %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Saving %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Sending %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Expecting %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Pause %1 seconds</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Timeout %1 seconds</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Hangup</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Answer</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>ID %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Password %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Prompting %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>PW Prompt %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Loop Start %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>ERROR: Nested too deep, ignored.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Loops nested too deeply!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Loop End %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>LoopEnd without matching Start! Line: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Starting pppd...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Scan Var: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Found: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Looping: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Script timed out!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Scanning: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Expecting: %1</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Logging on to network...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Running startup command...</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Done</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>pppd command + command-line arguments exceed 2024 characters in length.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot find the PPP daemon!&lt;br&gt;Make sure that pppd is installed and that you have entered the correct path.&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot execute:&lt;br&gt; %1&lt;br&gt;Please make sure that you have given setuid permission and that pppd is executable.&lt;br&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot find:&lt;br&gt; %1&lt;br&gt;Please make sure you have setup your modem device properly and/or adjust the location of the modem device on the modem tab of the setup dialog.&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;You have selected the authentication method PAP or CHAP. This requires that you supply a username and a password!&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>&lt;qt&gt;Cannot create PAP/CHAP authentication&lt;br&gt;file &quot;%1&quot;&lt;/qt&gt;</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>You must specify a telephone number!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>QObject::ModemWidget</name>
     <message>
         <source>Modem timeout:</source>
         <translation type="obsolete">Modem timeout:</translation>
     </message>
 </context>
 <context>
     <name>ScriptWidget</name>
     <message>
         <source>Add</source>
         <translation>Toevoegen</translation>
     </message>
     <message>
         <source>Insert</source>
         <translation>Invoegen</translation>
     </message>
     <message>
         <source>Remove</source>
         <translation>Verwijderen</translation>
     </message>
 </context>
 </TS>