Revamp the zaurus model detection to actually work on the C700.

1 files changed, 23 insertions, 18 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index cb7dd74..d78277f 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -999,297 +999,302 @@ void iPAQ::alarmSound ( )
                         else if ( volalarm > 100 )
                                 volalarm = 100;
                         volalarm |= ( volalarm << 8 );
 
                         if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
                                 vol_reset = true;
                 }
         }
 
         snd. play ( );
         while ( !snd. isFinished ( ))
                 qApp-> processEvents ( );
 
         if ( fd >= 0 ) {
                 if ( vol_reset )
                         ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
                 ::close ( fd );
         }
 #endif
 }
 
 
 bool iPAQ::setSoftSuspend ( bool soft )
 {
         bool res = false;
         int fd;
 
         if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
                 if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
                         res = true;
                 else
                         ::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
                 ::close ( fd );
         }
         else
                 ::perror ( "/proc/sys/ts/suspend_button_mode" );
 
         return res;
 }
 
 
 bool iPAQ::setDisplayBrightness ( int bright )
 {
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
         if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
                 FLITE_IN bl;
                 bl. mode = 1;
                 bl. pwr = bright ? 1 : 0;
                 bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
                 res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 int iPAQ::displayBrightnessResolution ( ) const
 {
         switch ( model ( )) {
                 case Model_iPAQ_H31xx:
                 case Model_iPAQ_H36xx:
                 case Model_iPAQ_H37xx:
                                 return 128;  // really 256, but >128 could damage the LCD
 
                 case Model_iPAQ_H38xx:
                 case Model_iPAQ_H39xx:
                         return 64;
 
                 default:
                         return 2;
         }
 }
 
 
 bool iPAQ::hasLightSensor ( ) const
 {
         return true;
 }
 
 int iPAQ::readLightSensor ( )
 {
         int fd;
         int val = -1;
 
         if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
                 char buffer [8];
 
                 if ( ::read ( fd, buffer, 5 ) == 5 ) {
                         char *endptr;
 
                         buffer [4] = 0;
                         val = ::strtol ( buffer + 2, &endptr, 16 );
 
                         if ( *endptr != 0 )
                                 val = -1;
                 }
                 ::close ( fd );
         }
 
         return val;
 }
 
 int iPAQ::lightSensorResolution ( ) const
 {
         return 256;
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
 
 
 void Zaurus::init ( )
 {
         d-> m_vendorstr = "Sharp";
         d-> m_vendor = Vendor_Sharp;
 
         QFile f ( "/proc/filesystems" );
+        QString model;
 
         if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
                 d-> m_vendorstr = "OpenZaurus Team";
                 d-> m_systemstr = "OpenZaurus";
                 d-> m_system = System_OpenZaurus;
 
                 f. close ( );
 
                 f. setName ( "/etc/oz_version" );
                 if ( f. open ( IO_ReadOnly )) {
                         QTextStream ts ( &f );
                         d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
                         f. close ( );
                 }
         }
         else {
                 d-> m_systemstr = "Zaurus";
                 d-> m_system = System_Zaurus;
         }
 
-        f. setName ( "/proc/deviceinfo/product" );
+        f. setName ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QTextStream ts ( &f );
-                QString model = ts. readLine ( );
-                f. close ( );
-
-                d-> m_modelstr = QString("Zaurus ") + model;
-                if ( model == "SL-5500" )
-                        d-> m_model = Model_Zaurus_SL5500;
-                else if ( model == "SL-C700" )
-                        d-> m_model = Model_Zaurus_SLC700;
-                else if ( model == "SL-A300" )
-                        d-> m_model = Model_Zaurus_SLA300;
-                else if ( model == "SL-B600" || model == "SL-5600" )
-                        d-> m_model = Model_Zaurus_SLB600;
-                else
-                        d-> m_model = Model_Zaurus_SL5000;
+                QString line;
+                while( line = ts. readLine ( ) ) {
+                        if ( line. left ( 8 ) == "Hardware" )
+                                break;
+                }
+                int loc = line. find ( ":" );
+                if ( loc != -1 )
+                        model = line. mid ( loc + 2 ). simplifyWhitespace( );
         }
-        else {
-                d-> m_model = Model_Zaurus_SL5000;
-                d-> m_modelstr = "Zaurus (model unknown)";
+
+        if ( model == "SHARP Corgi" ) {
+                d-> m_model = Model_Zaurus_SLC700;
+                d-> m_modelstr = "Zaurus SL-C700";
+        } else if ( model == "SHARP Poodle" ) {
+                d-> m_model = Model_Zaurus_SLB600;
+                d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
+        } else if ( model = "Sharp-Collie" ) {
+                d-> m_model = Model_Zaurus_SL5500;
+                d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
+        } else {
+                d-> m_model = Model_Zaurus_SL5500;
+                d-> m_modelstr = "Zaurus (Model unknown)";
         }
 
         bool flipstate = false;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLA300:
                         d-> m_rotation = Rot0;
                         break;
                 case Model_Zaurus_SLC700:
                         // Note: need to 1) set flipstate based on physical screen orientation
                         // and 2) check to see if the user overrode the rotation direction
                         // using appearance, and if so, remove that item from the Config to
                         // ensure the rotate applet flips us back to the previous state.
                         if ( flipstate ) {
                                 // 480x640
                                 d-> m_rotation = Rot0;
                                 d-> m_direction = CW;
                         } else {
                                 // 640x480
                                 d-> m_rotation = Rot270;
                                 d-> m_direction = CCW;
                         }
                         break;
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         d-> m_rotation = Rot270;
                         break;
         }
         m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         struct z_button * pz_buttons;
         int buttoncount;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLC700:
                         pz_buttons = z_buttons_c700;
                         buttoncount = ARRAY_SIZE(z_buttons_c700);
                         break;
                 default:
                         pz_buttons = z_buttons;
                         buttoncount = ARRAY_SIZE(z_buttons);
                         break;
         }
 
         for ( int i = 0; i < buttoncount; i++ ) {
                 struct z_button *zb = pz_buttons + i;
                 ODeviceButton b;
 
                 b. setKeycode ( zb-> code );
                 b. setUserText ( QObject::tr ( "Button", zb-> utext ));
                 b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
                 b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
                 b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
 
                 d-> m_buttons-> append ( b );
         }
 
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
         connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
         #defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
         //#defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
         #defineSHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 typedef struct sharp_led_status {
   int which;   /* select which LED status is wanted. */
   int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */