even more Jornada 56X updates

1 files changed, 11 insertions, 0 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 8624016..13b4330 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1995,586 +1995,597 @@ void SIMpad::init ( )
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
 		f. close ( );
 	} else {
 	    f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
 	    	d-> m_systemstr = "OpenEmbedded/SIMpad";
     		d-> m_system = System_OpenZaurus;
 
 	    	QTextStream ts ( &f );
 		    ts.setDevice ( &f );
 	    	d-> m_sysverstr = ts. readLine ( );
 		    f. close ( );
         }
     }
 
 	m_leds [0] = m_leds [1] = Led_Off;
 
 	m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	if ( isQWS( ) )
 		QWSServer::setKeyboardFilter ( this );
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
 		s_button *sb = simpad_buttons + i;
 		ODeviceButton b;
 
 		if (( sb-> model & d-> m_model ) == d-> m_model ) {
 			b. setKeycode ( sb-> code );
 			b. setUserText ( QObject::tr ( "Button", sb-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
 
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
 	//vl << Led_Mail; //TODO find out if LED1 is accessible anyway
 	return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 
 	if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
 		vl << Led_Off << Led_On;
 	//else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
 		//vl << Led_Off;
 	return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
 	switch ( l ) {
 		case Led_Power:
 			return m_leds [0];
 		//case Led_Mail:
 		//	return m_leds [1];
 		default:
 			return Led_Off;
 	}
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
 	static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
 
 	if ( l == Led_Power ) {
 		if ( fd >= 0 ) {
 			LED_IN leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. TotalTime  = 0;
 			leds. OnTime     = 0;
 			leds. OffTime    = 1;
 			leds. OffOnBlink = 2;
 
 			switch ( st ) {
 				case Led_Off      : leds. OffOnBlink = 0; break;
 				case Led_On       : leds. OffOnBlink = 1; break;
 				case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
 				case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
 			}
 
 			{
             /*TODO Implement this like that:
                read from cs3
                && with SIMPAD_LED2_ON
                write to cs3 */
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
 	//TODO
 	return false;
 }
 
 void SIMpad::timerEvent ( QTimerEvent * )
 {
 	killTimer ( m_power_timer );
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void SIMpad::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 	int fd;
 	int vol;
 	bool vol_reset = false;
 
 	if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
 		if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
 			Config cfg ( "qpe" );
 			cfg. setGroup ( "Volume" );
 
  			int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
 			if ( volalarm < 0 )
 				volalarm = 0;
 			else if ( volalarm > 100 )
 				volalarm = 100;
 			volalarm |= ( volalarm << 8 );
 
 			if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
 				vol_reset = true;
 		}
 	}
 
 	snd. play ( );
 	while ( !snd. isFinished ( ))
 		qApp-> processEvents ( );
 
 	if ( fd >= 0 ) {
 		if ( vol_reset )
 			::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
 		::close ( fd );
 	}
 #endif
 }
 
 
 bool SIMpad::suspend ( ) // Must override because SIMpad does NOT have apm
 {
 	qDebug( "ODevice for SIMpad: suspend()" );
 	if ( !isQWS( ) ) // only qwsserver is allowed to suspend
 		return false;
 
 	bool res = false;
 
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 
 	::sync ( ); // flush fs caches
 	res = ( ::system ( "cat /dev/fb/0 >/tmp/.buffer; echo > /proc/sys/pm/suspend; cat /tmp/.buffer >/dev/fb/0" ) == 0 ); //TODO make better :)
 
 	return res;
 }
 
 
 bool SIMpad::setSoftSuspend ( bool soft )
 {
 	qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
 	return false;
 }
 
 
 bool SIMpad::setDisplayStatus ( bool on )
 {
 	qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
 	bool res = false;
 	int fd;
 
 	QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
 
 	res = ( ::system( (const char*) cmdline ) == 0 );
 
 	return res;
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
 	qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
 	bool res = false;
 	int fd;
 
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 1 )
 		bright = 0;
 
 	if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
 		int value = 255 - bright;
 		const int mask = SIMPAD_BACKLIGHT_MASK;
 		value = value << 8;
 		value += mask;
 		char writeCommand[100];
 		const int count = sprintf( writeCommand, "0x%x\n", value );
 		res = ( ::write ( fd, writeCommand, count ) != -1 );
 		::close ( fd );
 	}
 	return res;
 }
 
 
 int SIMpad::displayBrightnessResolution ( ) const
 {
 	return 255; // All SIMpad models share the same display
 }
 
 /**************************************************
  *
  * Ramses
  *
  **************************************************/
 
 void Ramses::init()
 {
 	d->m_vendorstr = "M und N";
 	d->m_vendor = Vendor_MundN;
 
 	QFile f("/proc/sys/board/ramses");
 
 	d->m_modelstr = "Ramses";
 	d->m_model = Model_Ramses_MNCI;
 
 	d->m_rotation = Rot0;
 	d->m_holdtime = 1000;
 
 	f.setName("/etc/oz_version");
 
 	if (f.open(IO_ReadOnly)) {
 	   	d->m_systemstr = "OpenEmbedded/Ramses";
 	    	d->m_system = System_OpenZaurus;
 
 		QTextStream ts(&f);
 		ts.setDevice(&f);
 		d->m_sysverstr = ts.readLine();
 		f.close();
 	}
 
 	m_power_timer = 0;
 
 #ifdef QT_QWS_ALLOW_OVERCLOCK
 #warning *** Overclocking enabled - this may fry your hardware - you have been warned ***
 #define OC(x...)        x
 #else
 #define OC(x...)
 #endif
 
 
 	// This table is true for a Intel XScale PXA 255
 
 	d->m_cpu_frequencies->append("99000");      // mem= 99, run= 99, turbo= 99, PXbus= 50
 OC(	d->m_cpu_frequencies->append("118000"); )   // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem
 	d->m_cpu_frequencies->append("199100");     // mem= 99, run=199, turbo=199, PXbus= 99
 OC(	d->m_cpu_frequencies->append("236000"); )   // mem=118, run=236, turbo=236, PXbus=118 OC'd mem
 	d->m_cpu_frequencies->append("298600");     // mem= 99, run=199, turbo=298, PXbus= 99
 OC(	d->m_cpu_frequencies->append("354000"); )   // mem=118, run=236, turbo=354, PXbus=118 OC'd mem
 	d->m_cpu_frequencies->append("398099");     // mem= 99, run=199, turbo=398, PXbus= 99
 	d->m_cpu_frequencies->append("398100");     // mem= 99, run=398, turbo=398, PXbus=196
 OC(	d->m_cpu_frequencies->append("471000"); )   // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus
 
 }
 
 bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat)
 {
         Q_UNUSED( keycode );
         Q_UNUSED( modifiers );
         Q_UNUSED( isPress );
         Q_UNUSED( autoRepeat );
 	return false;
 }
 
 void Ramses::timerEvent(QTimerEvent *)
 {
 	killTimer(m_power_timer);
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false);
 	QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false);
 }
 
 
 bool Ramses::setSoftSuspend(bool soft)
 {
 	qDebug("Ramses::setSoftSuspend(%d)", soft);
 #if 0
 	bool res = false;
 	int fd;
 
 	if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) ||
         ((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) {
 
 		int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources
 
 		if (sources >= 0) {
 			if (soft)
 				sources &= ~APM_EVT_POWER_BUTTON;
 			else
 				sources |= APM_EVT_POWER_BUTTON;
 
 			if (::ioctl(fd, APM_IOCSEVTSRC, sources) >= 0) // set new event sources
 				res = true;
 			else
 				perror("APM_IOCGEVTSRC");
 		}
 		else
 			perror("APM_IOCGEVTSRC");
 
 		::close(fd);
 	}
 	else
 		perror("/dev/apm_bios or /dev/misc/apm_bios");
 
     return res;
 #else
     return true;
 #endif
 }
 
 bool Ramses::suspend ( )
 {
 	qDebug("Ramses::suspend");
 	return false;
 }
 
 /**
  * This sets the display on or off
  */
 bool Ramses::setDisplayStatus(bool on)
 {
 	qDebug("Ramses::setDisplayStatus(%d)", on);
 #if 0
 	bool res = false;
 	int fd;
 
 	if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) {
 		res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0);
 		::close(fd);
 	}
 	return res;
 #else
 	return true;
 #endif
 }
 
 
 /*
  * We get something between 0..255 into us
 */
 bool Ramses::setDisplayBrightness(int bright)
 {
 	qDebug("Ramses::setDisplayBrightness(%d)", bright);
 	bool res = false;
 	int fd;
 
 	// pwm1 brighness: 20 steps 500..0 (dunkel->hell)
 
 	if (bright > 255 )
 		bright = 255;
 	if (bright < 0)
 		bright = 0;
 
 	// Turn backlight completely off
 	if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) {
 		char writeCommand[10];
 		const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0);
 		res = (::write(fd, writeCommand, count) != -1);
 		::close(fd);
 	}
 
 	// scale backlight brightness to hardware
 	bright = 500-(bright * 500 / 255);
 	if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) {
 		qDebug(" %d -> pwm1", bright);
 		char writeCommand[100];
 		const int count = sprintf(writeCommand, "%d\n", bright);
 		res = (::write(fd, writeCommand, count) != -1);
 		::close(fd);
 	}
 	return res;
 }
 
 
 int Ramses::displayBrightnessResolution() const
 {
 	return 32;
 }
 
 bool Ramses::setDisplayContrast(int contr)
 {
 	qDebug("Ramses::setDisplayContrast(%d)", contr);
 	bool res = false;
 	int fd;
 
 	// pwm0 contrast: 20 steps 79..90 (dunkel->hell)
 
 	if (contr > 255 )
 		contr = 255;
 	if (contr < 0)
 		contr = 0;
 	contr = 90 - (contr * 20 / 255);
 
 	if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
 		qDebug(" %d -> pwm0", contr);
 		char writeCommand[100];
 		const int count = sprintf(writeCommand, "%d\n", contr);
 		res = (::write(fd, writeCommand, count) != -1);
 		res = true;
 		::close(fd);
 	}
 	return res;
 }
 
 
 int Ramses::displayContrastResolution() const
 {
 	return 20;
 }
 
 
 /**************************************************
  *                                                *
  * Jornada                                        *
  *                                                *
  **************************************************/
 
 
 bool Jornada::isJornada ( )
 {
   QFile f( "/proc/cpuinfo" );
   if ( f. open ( IO_ReadOnly ) ) {
     QTextStream ts ( &f );
     QString line;
     while( line = ts. readLine ( ) ) {
       if ( line. left ( 8 ) == "Hardware" ) {
 	int loc = line. find ( ":" );
 	if ( loc != -1 ) {
 	  QString model =
 	    line. mid ( loc + 2 ). simplifyWhiteSpace( );
 	  return ( model == "HP Jornada 56x" );
 	}
       }
     }
   }
   return false;
 }
 
 void Jornada::init ( )
 {
 	d-> m_vendorstr = "HP";
 	d-> m_vendor = Vendor_HP;
 	d-> m_modelstr = "Jornada 56x";
 	d-> m_model = Model_Jornada_56x;
 	d-> m_systemstr = "Familiar";
 	d-> m_system = System_Familiar;
 	d-> m_rotation = Rot0;
+
+	QFile f ( "/etc/familiar-version" );
+	f. setName ( "/etc/familiar-version" );
+	if ( f. open ( IO_ReadOnly )) {
+
+		QTextStream ts ( &f );
+		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
+
+		f. close ( );
+	}
 }
 
+
 void Jornada::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	// Simulation uses iPAQ 3660 device buttons
 
 	qDebug ( "init Buttons" );
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;
 		ODeviceButton b;
 
 		if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
 			b. setKeycode ( ib-> code );
 			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 int Jornada::displayBrightnessResolution ( ) const
 {
 }
 
 bool Jornada::setDisplayBrightness ( int bright )
 {
 	bool res = false;
 	int fd;
 
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 
 	if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
 		FLITE_IN bl;
 		bl. mode = 1;
 		bl. pwr = bright ? 1 : 0;
 		bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
 		res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 bool Jornada::setSoftSuspend ( bool soft )
 {
 	bool res = false;
 	int fd;
 
 	if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
 		if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
 			res = true;
 		else
 			::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
 		::close ( fd );
 	}
 	else
 		::perror ( "/proc/sys/ts/suspend_button_mode" );
 
 	return res;
 }