Revamp the zaurus model detection to actually work on the C700.

1 files changed, 21 insertions, 16 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index cb7dd74..d78277f 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -359,1087 +359,1092 @@ bool ODevice::setSoftSuspend ( bool /*soft*/ )
  */
 bool ODevice::suspend ( )
 {
 	if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
 		return false;
 
 	if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
 		return false;
 
 	bool res = false;
 
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 
 	::sync ( ); // flush fs caches
 	res = ( ::system ( "apm --suspend" ) == 0 );
 
 	// This is needed because the iPAQ apm implementation is asynchronous and we
 	// can not be sure when exactly the device is really suspended
 	// This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
 	if ( res ) {
 		do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
 			::usleep ( 200 * 1000 );
 			::gettimeofday ( &tvn, 0 );
 		} while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
 	}
 
 	return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
  * This sets the display on or off
  */
 bool ODevice::setDisplayStatus ( bool on )
 {
 	if ( d-> m_model == Model_Unknown )
 		return false;
 
 	bool res = false;
 	int fd;
 
 	if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 		res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 /**
  * This sets the display brightness
  * @return success or failure
  */
 bool ODevice::setDisplayBrightness ( int p)
 {
         Q_UNUSED( p )
 	return false;
 }
 
 int ODevice::displayBrightnessResolution ( ) const
 {
 	return 16;
 }
 
 /**
  * This returns the vendor as string
  * @return Vendor as QString
  */
 QString ODevice::vendorString ( ) const
 {
 	return d-> m_vendorstr;
 }
 
 /**
  * This returns the vendor as one of the values of OVendor
  * @return OVendor
  */
 OVendor ODevice::vendor ( ) const
 {
 	return d-> m_vendor;
 }
 
 /**
  * This returns the model as a string
  * @return A string representing the model
  */
 QString ODevice::modelString ( ) const
 {
 	return d-> m_modelstr;
 }
 
 /**
  * This does return the OModel used
  */
 OModel ODevice::model ( ) const
 {
 	return d-> m_model;
 }
 
 /**
  * This does return the systen name
  */
 QString ODevice::systemString ( ) const
 {
 	return d-> m_systemstr;
 }
 
 /**
  * Return System as OSystem value
  */
 OSystem ODevice::system ( ) const
 {
 	return d-> m_system;
 }
 
 /**
  * @return the version string of the base system
  */
 QString ODevice::systemVersionString ( ) const
 {
 	return d-> m_sysverstr;
 }
 
 /**
  *  @return the current Transformation
  */
 Transformation ODevice::rotation ( ) const
 {
 	return d-> m_rotation;
 }
 
 /**
  *  @return the current rotation direction
  */
 ODirection ODevice::direction ( ) const
 {
 	return d-> m_direction;
 }
 
 /**
  * This plays an alarmSound
  */
 void ODevice::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This plays a key sound
  */
 void ODevice::keySound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "keysound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This plays a touch sound
  */
 void ODevice::touchSound ( )
 {
 
 #ifndef QT_NO_SOUND
 	static Sound snd ( "touchsound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This method will return a list of leds
  * available on this device
  * @return a list of LEDs.
  */
 QValueList <OLed> ODevice::ledList ( ) const
 {
 	return QValueList <OLed> ( );
 }
 
 /**
  * This does return the state of the LEDs
  */
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
 	return QValueList <OLedState> ( );
 }
 
 /**
  * @return the state for a given OLed
  */
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
 	return Led_Off;
 }
 
 /**
  * Set the state for a LED
  * @param which Which OLed to use
  * @param st The state to set
  * @return success or failure
  */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
 	return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
 	return false;
 }
 
 /**
  * @return a value from the light senso
  */
 int ODevice::readLightSensor ( )
 {
 	return -1;
 }
 
 /**
  * @return the light sensor resolution whatever that is ;)
  */
 int ODevice::lightSensorResolution ( ) const
 {
 	return 0;
 }
 
 /**
  * @return a list of hardware buttons
  */
 const QValueList <ODeviceButton> &ODevice::buttons ( )
 {
 	initButtons ( );
 
 	return *d-> m_buttons;
 }
 
 /**
  * @return The amount of time that would count as a hold
  */
 uint ODevice::buttonHoldTime ( ) const
 {
 	return d-> m_holdtime;
 }
 
 /**
  * This method return a ODeviceButton for a key code
  * or 0 if no special hardware button is available for the device
  *
  * @return The devicebutton or 0l
  * @see ODeviceButton
  */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
 	initButtons ( );
 
 	for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) {
 		if ( (*it). keycode ( ) == code )
 			return &(*it);
 	}
 	return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
 	initButtons ( );
 
 	Config cfg ( "ButtonSettings" );
 
 	for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) {
 		ODeviceButton &b = ( *d-> m_buttons ) [i];
 		QString group = "Button" + QString::number ( i );
 
 		QCString pch, hch;
 		QCString pm, hm;
 		QByteArray pdata, hdata;
 
 		if ( cfg. hasGroup ( group )) {
 			cfg. setGroup ( group );
 			pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
 			pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
 			// pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
 			hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
 			hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
 			// hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
 		}
 
 		b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
 		b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
 	}
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
 	initButtons ( );
 
 	QString mb_chan;
 
 	if ( button >= (int) d-> m_buttons-> count ( ))
 		return;
 
 	ODeviceButton &b = ( *d-> m_buttons ) [button];
         b. setPressedAction ( action );
 
 	mb_chan=b. pressedAction ( ). channel ( );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
 	buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
 	initButtons ( );
 
 	if ( button >= (int) d-> m_buttons-> count ( ))
 		return;
 
 	ODeviceButton &b = ( *d-> m_buttons ) [button];
     	b. setHeldAction ( action );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
 	buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
 	d-> m_vendorstr = "HP";
 	d-> m_vendor = Vendor_HP;
 
 	QFile f ( "/proc/hal/model" );
 
 	if ( f. open ( IO_ReadOnly )) {
 		QTextStream ts ( &f );
 
 		d-> m_modelstr = "H" + ts. readLine ( );
 
 		if ( d-> m_modelstr == "H3100" )
 			d-> m_model = Model_iPAQ_H31xx;
 		else if ( d-> m_modelstr == "H3600" )
 			d-> m_model = Model_iPAQ_H36xx;
 		else if ( d-> m_modelstr == "H3700" )
 			d-> m_model = Model_iPAQ_H37xx;
 		else if ( d-> m_modelstr == "H3800" )
 			d-> m_model = Model_iPAQ_H38xx;
 		else if ( d-> m_modelstr == "H3900" )
 			d-> m_model = Model_iPAQ_H39xx;
 		else
 			d-> m_model = Model_Unknown;
 
 		f. close ( );
 	}
 
 	switch ( d-> m_model ) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H38xx:
 			d-> m_rotation = Rot90;
 			break;
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 		case Model_iPAQ_H39xx:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) {
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
 		f. close ( );
 	} else {
 	    f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
 	    	d-> m_systemstr = "OpenEmbedded/iPaq";
     		d-> m_system = System_Familiar;
 
 	    	QTextStream ts ( &f );
 		    ts.setDevice ( &f );
 	    	d-> m_sysverstr = ts. readLine ( );
 		    f. close ( );
         }
     }
 
 
 
 
 
 	m_leds [0] = m_leds [1] = Led_Off;
 
 	m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
 	if ( d-> m_qwsserver )
 		QWSServer::setKeyboardFilter ( this );
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;
 		ODeviceButton b;
 
 		if (( ib-> model & d-> m_model ) == d-> m_model ) {
 			b. setKeycode ( ib-> code );
 			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
 	unsigned char mode;
 	unsigned char pwr;
 	unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Power;
 
 	if ( d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_BlueTooth;
 	return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 
 	if ( l == Led_Power )
 		vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
 	else if ( l == Led_BlueTooth && d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_Off; // << Led_On << ???
 
 	return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {
 	switch ( l ) {
 		case Led_Power:
 			return m_leds [0];
 		case Led_BlueTooth:
 			return m_leds [1];
 		default:
 			return Led_Off;
 	}
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st )
 {
 	static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
 	if ( l == Led_Power ) {
 		if ( fd >= 0 ) {
 			LED_IN leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. TotalTime  = 0;
 			leds. OnTime     = 0;
 			leds. OffTime    = 1;
 			leds. OffOnBlink = 2;
 
 			switch ( st ) {
 				case Led_Off      : leds. OffOnBlink = 0; break;
 				case Led_On       : leds. OffOnBlink = 1; break;
 				case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
 				case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
 			}
 
 			if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) {
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 
 bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
 	int newkeycode = keycode;
 
 	switch ( keycode ) {
 		// H38xx/H39xx have no "Q" key anymore - this is now the Mail key
 		case HardKey_Menu: {
 			if (( d-> m_model == Model_iPAQ_H38xx ) ||
 			    ( d-> m_model == Model_iPAQ_H39xx )) {
 				newkeycode = HardKey_Mail;
 			}
 			break;
 		}
 
 		// Rotate cursor keys 180°
 		case Key_Left :
 		case Key_Right:
 		case Key_Up   :
 		case Key_Down : {
 			if (( d-> m_model == Model_iPAQ_H31xx ) ||
 			    ( d-> m_model == Model_iPAQ_H38xx )) {
 				newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4;
 			}
 			break;
 		}
 
 		// map Power Button short/long press to F34/F35
 		case Key_SysReq: {
 			if ( isPress ) {
 				if ( m_power_timer )
 					killTimer ( m_power_timer );
 				m_power_timer = startTimer ( 500 );
 			}
 			else if ( m_power_timer ) {
 				killTimer ( m_power_timer );
 				m_power_timer = 0;
 				QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false );
 				QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false );
 			}
 			newkeycode = Key_unknown;
 			break;
 		}
 	}
 
 	if ( newkeycode != keycode ) {
 		if ( newkeycode != Key_unknown )
 			QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
 		return true;
 	}
 	else
 		return false;
 }
 
 void iPAQ::timerEvent ( QTimerEvent * )
 {
 	killTimer ( m_power_timer );
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void iPAQ::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 	int fd;
 	int vol;
 	bool vol_reset = false;
 
 	if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
 		if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
 			Config cfg ( "qpe" );
 			cfg. setGroup ( "Volume" );
 
  			int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
 			if ( volalarm < 0 )
 				volalarm = 0;
 			else if ( volalarm > 100 )
 				volalarm = 100;
 			volalarm |= ( volalarm << 8 );
 
 			if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
 				vol_reset = true;
 		}
 	}
 
 	snd. play ( );
 	while ( !snd. isFinished ( ))
 		qApp-> processEvents ( );
 
 	if ( fd >= 0 ) {
 		if ( vol_reset )
 			::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
 		::close ( fd );
 	}
 #endif
 }
 
 
 bool iPAQ::setSoftSuspend ( bool soft )
 {
 	bool res = false;
 	int fd;
 
 	if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
 		if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
 			res = true;
 		else
 			::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
 		::close ( fd );
 	}
 	else
 		::perror ( "/proc/sys/ts/suspend_button_mode" );
 
 	return res;
 }
 
 
 bool iPAQ::setDisplayBrightness ( int bright )
 {
 	bool res = false;
 	int fd;
 
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 
 	if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
 		FLITE_IN bl;
 		bl. mode = 1;
 		bl. pwr = bright ? 1 : 0;
 		bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
 		res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 int iPAQ::displayBrightnessResolution ( ) const
 {
 	switch ( model ( )) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 			return 128;  	// really 256, but >128 could damage the LCD
 
 		case Model_iPAQ_H38xx:
 		case Model_iPAQ_H39xx:
 			return 64;
 
 		default:
 			return 2;
 	}
 }
 
 
 bool iPAQ::hasLightSensor ( ) const
 {
 	return true;
 }
 
 int iPAQ::readLightSensor ( )
 {
 	int fd;
 	int val = -1;
 
 	if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
 		char buffer [8];
 
 		if ( ::read ( fd, buffer, 5 ) == 5 ) {
 			char *endptr;
 
 			buffer [4] = 0;
 			val = ::strtol ( buffer + 2, &endptr, 16 );
 
 			if ( *endptr != 0 )
 				val = -1;
 		}
 		::close ( fd );
 	}
 
 	return val;
 }
 
 int iPAQ::lightSensorResolution ( ) const
 {
 	return 256;
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
 
 
 void Zaurus::init ( )
 {
 	d-> m_vendorstr = "Sharp";
 	d-> m_vendor = Vendor_Sharp;
 
 	QFile f ( "/proc/filesystems" );
+	QString model;
 
 	if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
 		d-> m_vendorstr = "OpenZaurus Team";
 		d-> m_systemstr = "OpenZaurus";
 		d-> m_system = System_OpenZaurus;
 
 		f. close ( );
 
 		f. setName ( "/etc/oz_version" );
 		if ( f. open ( IO_ReadOnly )) {
 			QTextStream ts ( &f );
 			d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
 			f. close ( );
 		}
 	}
 	else {
 		d-> m_systemstr = "Zaurus";
 		d-> m_system = System_Zaurus;
 	}
 
-	f. setName ( "/proc/deviceinfo/product" );
+	f. setName ( "/proc/cpuinfo" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QTextStream ts ( &f );
-		QString model = ts. readLine ( );
-		f. close ( );
+		QString line;
+		while( line = ts. readLine ( ) ) {
+			if ( line. left ( 8 ) == "Hardware" )
+				break;
+		}
+		int loc = line. find ( ":" );
+		if ( loc != -1 )
+			model = line. mid ( loc + 2 ). simplifyWhitespace( );
+	}
 
-		d-> m_modelstr = QString("Zaurus ") + model;
-		if ( model == "SL-5500" )
-			d-> m_model = Model_Zaurus_SL5500;
-		else if ( model == "SL-C700" )
+	if ( model == "SHARP Corgi" ) {
 			d-> m_model = Model_Zaurus_SLC700;
-		else if ( model == "SL-A300" )
-			d-> m_model = Model_Zaurus_SLA300;
-		else if ( model == "SL-B600" || model == "SL-5600" )
+		d-> m_modelstr = "Zaurus SL-C700";
+	} else if ( model == "SHARP Poodle" ) {
 			d-> m_model = Model_Zaurus_SLB600;
-		else
-			d-> m_model = Model_Zaurus_SL5000;
-	}
-	else {
-		d-> m_model = Model_Zaurus_SL5000;
-		d-> m_modelstr = "Zaurus (model unknown)";
+		d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
+	} else if ( model = "Sharp-Collie" ) {
+		d-> m_model = Model_Zaurus_SL5500;
+		d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
+	} else {
+		d-> m_model = Model_Zaurus_SL5500;
+		d-> m_modelstr = "Zaurus (Model unknown)";
 	}
 
 	bool flipstate = false;
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLA300:
 			d-> m_rotation = Rot0;
 			break;
 		case Model_Zaurus_SLC700:
 			// Note: need to 1) set flipstate based on physical screen orientation
 			// and 2) check to see if the user overrode the rotation direction
 			// using appearance, and if so, remove that item from the Config to
 			// ensure the rotate applet flips us back to the previous state.
 			if ( flipstate ) {
 				// 480x640
 				d-> m_rotation = Rot0;
 				d-> m_direction = CW;
 			} else {
 				// 640x480
 				d-> m_rotation = Rot270;
 				d-> m_direction = CCW;
 			}
 			break;
 		case Model_Zaurus_SLB600:
 		case Model_Zaurus_SL5500:
 		case Model_Zaurus_SL5000:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 	m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	struct z_button * pz_buttons;
 	int buttoncount;
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLC700:
 			pz_buttons = z_buttons_c700;
 			buttoncount = ARRAY_SIZE(z_buttons_c700);
 			break;
 		default:
 			pz_buttons = z_buttons;
 			buttoncount = ARRAY_SIZE(z_buttons);
 			break;
 	}
 
 	for ( int i = 0; i < buttoncount; i++ ) {
 		struct z_button *zb = pz_buttons + i;
 		ODeviceButton b;
 
 		b. setKeycode ( zb-> code );
 		b. setUserText ( QObject::tr ( "Button", zb-> utext ));
 		b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
 		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
 		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
 
 		d-> m_buttons-> append ( b );
 	}
 
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
 #define	SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 typedef struct sharp_led_status {
   int which;   /* select which LED status is wanted. */
   int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_NEWMAIL_EXISTS  1   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_UNREAD_MAIL_EX  2   /* for SHARP_LED_MAIL_EXISTS */
 
 // #include <asm/sharp_apm.h> // including kernel headers is evil ...
 
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 	static int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
 
 	if ( fd >= 0 ) {
 		::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
 		::close ( fd );
 	}
 }
 
 
 void Zaurus::alarmSound ( )
 {
 	buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
 }
 
 void Zaurus::touchSound ( )
 {
 	buzzer ( SHARP_BUZ_TOUCHSOUND );
 }
 
 void Zaurus::keySound ( )
 {
 	buzzer ( SHARP_BUZ_KEYSOUND );
 }
 
 
 QValueList <OLed> Zaurus::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Mail;
 	return vl;
 }
 
 QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 
 	if ( l == Led_Mail )
 		vl << Led_Off << Led_On << Led_BlinkSlow;
 	return vl;
 }
 
 OLedState Zaurus::ledState ( OLed which ) const
 {
 	if ( which == Led_Mail )
 		return m_leds [0];
 	else
 		return Led_Off;
 }
 
 bool Zaurus::setLedState ( OLed which, OLedState st )
 {
 	static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK );
 
 	if ( which == Led_Mail ) {
 		if ( fd >= 0 ) {
 			struct sharp_led_status leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. which = SHARP_LED_MAIL_EXISTS;
 			bool ok = true;
 
 			switch ( st ) {
 				case Led_Off      : leds. status = LED_MAIL_NO_UNREAD_MAIL; break;
 				case Led_On       : leds. status = LED_MAIL_NEWMAIL_EXISTS; break;
 				case Led_BlinkSlow: leds. status = LED_MAIL_UNREAD_MAIL_EX; break;
 				default            : ok = false;
 			}
 
 			if ( ok && ( ::ioctl ( fd, SHARP_LED_SETSTATUS, &leds ) >= 0 )) {
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 bool Zaurus::setSoftSuspend ( bool soft )
 {
 	bool res = false;
 	int fd;
 
 	if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) ||
         (( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) {
 
 		int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources
 
 		if ( sources >= 0 ) {
 			if ( soft )
 				sources &= ~APM_EVT_POWER_BUTTON;
 			else
 				sources |= APM_EVT_POWER_BUTTON;
 
 			if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources
 				res = true;
 			else
 				perror ( "APM_IOCGEVTSRC" );
 		}
 		else
 			perror ( "APM_IOCGEVTSRC" );
 
 		::close ( fd );
 	}
 	else
 		perror ( "/dev/apm_bios or /dev/misc/apm_bios" );
 
     return res;
 }
 
 
 bool Zaurus::setDisplayBrightness ( int bright )
 {
 	bool res = false;
 	int fd;
 
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 
 	if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
 		int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
 		if ( bright && !bl )
 			bl = 1;
 		res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 
 int Zaurus::displayBrightnessResolution ( ) const
 {
 	return 5;
 }