- catch up with changed sniffing behaviour in newer wlan-ng *puke* drivers

- new API: OPacketCapturer::next( int time )

3 files changed, 38 insertions, 6 deletions

diff --git a/libopie2/opienet/onetwork.cpp b/libopie2/opienet/onetwork.cpp
index 1f529d2..45ee4c0 100644
--- a/libopie2/opienet/onetwork.cpp
+++ b/libopie2/opienet/onetwork.cpp
@@ -806,229 +806,235 @@ bool OWirelessNetworkInterface::wioctl( int call, struct iwreq& iwreq ) const
 
 
 bool OWirelessNetworkInterface::wioctl( int call ) const
 {
     strcpy( _iwr.ifr_name, name() );
     return wioctl( call, _iwr );
 }
 
 
 /*======================================================================================
  * OMonitoringInterface
  *======================================================================================*/
 
 OMonitoringInterface::OMonitoringInterface( ONetworkInterface* iface, bool prismHeader )
                       :_if( static_cast<OWirelessNetworkInterface*>( iface ) ), _prismHeader( prismHeader )
 {
 }
 
 
 OMonitoringInterface::~OMonitoringInterface()
 {
 }
 
 
 void OMonitoringInterface::setChannel( int c )
 {
     // use standard WE channel switching protocol
     memset( &_if->_iwr, 0, sizeof( struct iwreq ) );
     _if->_iwr.u.freq.m = c;
     _if->_iwr.u.freq.e = 0;
     _if->wioctl( SIOCSIWFREQ );
 }
 
 
 bool OMonitoringInterface::enabled() const
 {
     return _if->monitorMode();
 }
 
 
 void OMonitoringInterface::setEnabled( bool b )
 {
 }
 
 
 /*======================================================================================
  * OCiscoMonitoringInterface
  *======================================================================================*/
 
 OCiscoMonitoringInterface::OCiscoMonitoringInterface( ONetworkInterface* iface, bool prismHeader )
                            :OMonitoringInterface( iface, prismHeader )
 {
     iface->setMonitoring( this );
 }
 
 
 OCiscoMonitoringInterface::~OCiscoMonitoringInterface()
 {
 }
 
 
 void OCiscoMonitoringInterface::setEnabled( bool b )
 {
     QString fname;
     fname.sprintf( "/proc/driver/aironet/%s", (const char*) _if->name() );
     QFile f( fname );
     if ( !f.exists() ) return;
 
     if ( f.open( IO_WriteOnly ) )
     {
         QTextStream s( &f );
         s << "Mode: r";
         s << "Mode: y";
         s << "XmitPower: 1";
     }
 
     // flushing and closing will be done automatically when f goes out of scope
 }
 
 
 QString OCiscoMonitoringInterface::name() const
 {
     return "cisco";
 }
 
 
 void OCiscoMonitoringInterface::setChannel( int )
 {
     // cisco devices automatically switch channels when in monitor mode
 }
 
 
 /*======================================================================================
  * OWlanNGMonitoringInterface
  *======================================================================================*/
 
 
 OWlanNGMonitoringInterface::OWlanNGMonitoringInterface( ONetworkInterface* iface, bool prismHeader )
                            :OMonitoringInterface( iface, prismHeader )
 {
     iface->setMonitoring( this );
 }
 
 
 OWlanNGMonitoringInterface::~OWlanNGMonitoringInterface()
 {
 }
 
 
 void OWlanNGMonitoringInterface::setEnabled( bool b )
 {
     //FIXME: do nothing if its already in the same mode
 
     QString enable = b ? "true" : "false";
     QString prism = _prismHeader ? "true" : "false";
     QString cmd;
     cmd.sprintf( "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=%s prismheader=%s",
                  (const char*) _if->name(), 1, (const char*) enable, (const char*) prism );
     system( cmd );
 }
 
 
 QString OWlanNGMonitoringInterface::name() const
 {
     return "wlan-ng";
 }
 
 
-void OWlanNGMonitoringInterface::setChannel( int )
+void OWlanNGMonitoringInterface::setChannel( int c )
 {
-    // wlan-ng devices automatically switch channels when in monitor mode
-    // NOTE: The above note no longer seems to be true for recent driver versions!
+    //NOTE: Older wlan-ng drivers automatically hopped channels while lnxreq_wlansniff=true. Newer ones don't.
+
+    QString enable = "true"; //_if->monitorMode() ? "true" : "false";
+    QString prism = _prismHeader ? "true" : "false";
+    QString cmd;
+    cmd.sprintf( "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=%s prismheader=%s",
+                 (const char*) _if->name(), c+1, (const char*) enable, (const char*) prism );
+    system( cmd );
 }
 
 
 /*======================================================================================
  * OHostAPMonitoringInterface
  *======================================================================================*/
 
 OHostAPMonitoringInterface::OHostAPMonitoringInterface( ONetworkInterface* iface, bool prismHeader )
                            :OMonitoringInterface( iface, prismHeader )
 {
     iface->setMonitoring( this );
 }
 
 OHostAPMonitoringInterface::~OHostAPMonitoringInterface()
 {
 }
 
 void OHostAPMonitoringInterface::setEnabled( bool b )
 {
     // IW_MODE_MONITOR was introduced in Wireless Extensions Version 15
     // Wireless Extensions < Version 15 need iwpriv commandos for monitoring
 
     #if WIRELESS_EXT > 14
     if ( b )
         _if->setMode( "monitor" );  // IW_MODE_MONITOR doesn't support prism header
     else
         _if->setMode( "managed" );
     #else
     int monitorCode = _prismHeader ? 1 : 2;
     if ( b )
     {
         _if->setPrivate( "monitor", 1, monitorCode );
     }
     else
     {
         _if->setPrivate( "monitor", 1, 0 );
     }
     #endif
 }
 
 
 QString OHostAPMonitoringInterface::name() const
 {
     return "hostap";
 }
 
 
 /*======================================================================================
  * OOrinocoNetworkInterface
  *======================================================================================*/
 
 OOrinocoMonitoringInterface::OOrinocoMonitoringInterface( ONetworkInterface* iface, bool prismHeader )
                            :OMonitoringInterface( iface, prismHeader )
 {
     iface->setMonitoring( this );
 }
 
 
 OOrinocoMonitoringInterface::~OOrinocoMonitoringInterface()
 {
 }
 
 
 void OOrinocoMonitoringInterface::setChannel( int c )
 {
     int monitorCode = _prismHeader ? 1 : 2;
     _if->setPrivate( "monitor", 2, monitorCode, c );
 }
 
 
 void OOrinocoMonitoringInterface::setEnabled( bool b )
 {
     // IW_MODE_MONITOR was introduced in Wireless Extensions Version 15
     // Wireless Extensions < Version 15 need iwpriv commandos for monitoring
 
     #if WIRELESS_EXT > 14
     if ( b )
         _if->setMode( "monitor" );  // IW_MODE_MONITOR doesn't support prism header
     else
         _if->setMode( "managed" );
     #else
     if ( b )
     {
         setChannel( 1 );
     }
     else
     {
         _if->setPrivate( "monitor", 2, 0, 0 );
     }
     #endif
 }
 
 
 QString OOrinocoMonitoringInterface::name() const
 {
     return "orinoco";
 }
diff --git a/libopie2/opienet/opcap.cpp b/libopie2/opienet/opcap.cpp
index 9ed2b83..38ca1a1 100644
--- a/libopie2/opienet/opcap.cpp
+++ b/libopie2/opienet/opcap.cpp
@@ -1,327 +1,331 @@
 /*
                              This file is part of the Opie Project
                              Copyright (C) 2003 by the Wellenreiter team:
                              Martin J. Muench <mjm@remote-exploit.org>
                              Max Moser <mmo@remote-exploit.org
                              Michael 'Mickey' Lauer <mickey@tm.informatik.uni-frankfurt.de>
               =.
             .=l.
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; either version 2 of the License,
      ._= =}       :          or (at your option) any later version.
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
     =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
   _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
  :     =  ...= . :.=-
  -.   .:....=;==+<;          You should have received a copy of the GNU
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 
 */
 
 /* OPIE */
-
 #include <opie2/opcap.h>
 
 /* QT */
-
 #include <qapplication.h> // don't use oapplication here (will decrease reusability in other projects)
 #include <qsocketnotifier.h>
 #include <qobjectlist.h>
 
+/* SYSTEM */
+#include <sys/time.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+/* LOCAL */
 #include "udp_ports.h"
 
 /*======================================================================================
  * OPacket
  *======================================================================================*/
 
 OPacket::OPacket( int datalink, packetheaderstruct header, const unsigned char* data, QObject* parent )
         :QObject( parent, "Generic" ), _hdr( header ), _data( data )
 {
     //qDebug( "OPacket::OPacket(): (Len %d, CapLen %d)" /*, ctime((const time_t*) header.ts.tv_sec)*/, header.len, header.caplen );
 
     _end = (unsigned char*) data + header.len;
     //qDebug( "OPacket::data @ %0x, end @ %0x", data, _end );
 
     switch ( datalink )
     {
         case DLT_EN10MB:
             qDebug( "OPacket::OPacket(): Received Packet. Datalink = ETHERNET" );
             new OEthernetPacket( _end, (const struct ether_header*) data, this );
             break;
 
         case DLT_IEEE802_11:
             qDebug( "OPacket::OPacket(): Received Packet. Datalink = IEEE802.11" );
             new OWaveLanPacket( _end, (const struct ieee_802_11_header*) data, this );
             break;
 
         case DLT_PRISM_HEADER:
             qDebug( "OPacket::OPacket(): Received Packet. Datalink = PRISM_HEADER" );
             new OPrismHeaderPacket( _end, (const struct prism_hdr*) (unsigned char*) data, this );
             break;
 
         default:
             qWarning( "OPacket::OPacket(): Received Packet over unsupported datalink (type %d)!", datalink );
     }
 }
 
 
 OPacket::~OPacket()
 {
 }
 
 
 timevalstruct OPacket::timeval() const
 {
     return _hdr.ts;
 }
 
 
 int OPacket::caplen() const
 {
     return _hdr.caplen;
 }
 
 
 void OPacket::updateStats( QMap<QString,int>& stats, QObjectList* l )
 {
     if (!l) return;
     QObject* o = l->first();
     while ( o )
     {
         stats[o->name()]++;
         updateStats( stats, const_cast<QObjectList*>( o->children() ) );
         o = l->next();
     }
 }
 
 
 void OPacket::dumpStructure( QObjectList* l )
 {
     QString packetString( "[ |" + _dumpStructure( l ) + " ]" );
     qDebug( "OPacket::dumpStructure: %s", (const char*) packetString );
 }
 
 
 QString OPacket::_dumpStructure( QObjectList* l )
 {
     if (!l) return QString::null;
     QObject* o = l->first();
     QString str(" ");
 
     while ( o )
     {
         str.append( o->name() );
         str.append( " |" );
         str += _dumpStructure( const_cast<QObjectList*>( o->children() ) );
         o = l->next();
     }
     return str;
 }
 
 QString OPacket::dump( int bpl ) const
 {
     static int index = 0;
     index++;
     int len = _hdr.caplen;
     QString str;
     str.sprintf( "\n<----- Packet #%04d Len = 0x%X (%d) ----->\n\n", index, len, len );
     str.append( "0000: " );
     QString tmp;
     QString bytes;
     QString chars;
 
     for ( int i = 0; i < len; ++i )
     {
         tmp.sprintf( "%02X ", _data[i] ); bytes.append( tmp );
         if ( (_data[i] > 31) && (_data[i]<128) ) chars.append( _data[i] );
         else chars.append( '.' );
 
         if ( !((i+1) % bpl) )
         {
             str.append( bytes );
             str.append( ' ' );
             str.append( chars );
             str.append( '\n' );
             tmp.sprintf( "%04X: ", i+1 ); str.append( tmp );
             bytes = "";
             chars = "";
         }
 
     }
     if ( (len % bpl) )
     {
         str.append( bytes.leftJustify( 1 + 3*bpl ) );
         str.append( chars );
     }
     str.append( '\n' );
     return str;
 }
 
 
 int OPacket::len() const
 {
     return _hdr.len;
 }
 
 
 /*======================================================================================
  * OEthernetPacket
  *======================================================================================*/
 
 OEthernetPacket::OEthernetPacket( const unsigned char* end, const struct ether_header* data, QObject* parent )
                 :QObject( parent, "Ethernet" ), _ether( data )
 {
 
     qDebug( "Source = %s", (const char*) sourceAddress().toString() );
     qDebug( "Destination = %s", (const char*) destinationAddress().toString() );
 
     if ( sourceAddress() == OMacAddress::broadcast )
         qDebug( "Source is broadcast address" );
     if ( destinationAddress() == OMacAddress::broadcast )
         qDebug( "Destination is broadcast address" );
 
     switch ( type() )
     {
         case ETHERTYPE_IP: new OIPPacket( end, (const struct iphdr*) (data+1), this ); break;
-        case ETHERTYPE_ARP: { qDebug( "OPacket::OPacket(): Received Ethernet Packet : Type = ARP" ); break; }
+        case ETHERTYPE_ARP: new OARPPacket( end, (const struct myarphdr*) (data+1), this ); break;
         case ETHERTYPE_REVARP: { qDebug( "OPacket::OPacket(): Received Ethernet Packet : Type = RARP" ); break; }
         default: qDebug( "OPacket::OPacket(): Received Ethernet Packet : Type = UNKNOWN" );
     }
 
 }
 
 
 OEthernetPacket::~OEthernetPacket()
 {
 }
 
 
 OMacAddress OEthernetPacket::sourceAddress() const
 {
     return OMacAddress( _ether->ether_shost );
 }
 
 
 OMacAddress OEthernetPacket::destinationAddress() const
 {
     return OMacAddress( _ether->ether_dhost );
 }
 
 int OEthernetPacket::type() const
 {
     return ntohs( _ether->ether_type );
 }
 
 
 /*======================================================================================
  * OIPPacket
  *======================================================================================*/
 
 
 OIPPacket::OIPPacket( const unsigned char* end, const struct iphdr* data, QObject* parent )
           :QObject( parent, "IP" ), _iphdr( data )
 {
     qDebug( "OIPPacket::OIPPacket(): decoding IP header..." );
 
     //qDebug( "FromAddress: %s", (const char*) inet_ntoa( *src ) );
     //qDebug( "  ToAddress: %s", (const char*) inet_ntoa( *dst ) );
 
     qDebug( "FromAddress: %s", (const char*) fromIPAddress().toString() );
     qDebug( "  toAddress: %s", (const char*) toIPAddress().toString() );
 
     switch ( protocol() )
     {
         case IPPROTO_UDP: new OUDPPacket( end, (const struct udphdr*) (data+1), this ); break;
         case IPPROTO_TCP: new OTCPPacket( end, (const struct tcphdr*) (data+1), this ); break;
         default: qDebug( "OIPPacket::OIPPacket(): unknown IP protocol type = %d", protocol() );
     }
 
 }
 
 OIPPacket::~OIPPacket()
 {
 }
 
 
 QHostAddress OIPPacket::fromIPAddress() const
 {
     return EXTRACT_32BITS( &_iphdr->saddr );
 }
 
 
 QHostAddress OIPPacket::toIPAddress() const
 {
     return EXTRACT_32BITS( &_iphdr->saddr );
 }
 
 
 int OIPPacket::tos() const
 {
     return _iphdr->tos;
 }
 
 
 int OIPPacket::len() const
 {
     return EXTRACT_16BITS( &_iphdr->tot_len );
 }
 
 
 int OIPPacket::id() const
 {
     return EXTRACT_16BITS( &_iphdr->id );
 }
 
 
 int OIPPacket::offset() const
 {
     return EXTRACT_16BITS( &_iphdr->frag_off );
 }
 
 
 int OIPPacket::ttl() const
 {
     return _iphdr->ttl;
 }
 
 
 int OIPPacket::protocol() const
 {
     return _iphdr->protocol;
 }
 
 
 int OIPPacket::checksum() const
 {
     return EXTRACT_16BITS( &_iphdr->check );
 }
 
 /*======================================================================================
  * OARPPacket
  *======================================================================================*/
 
 
 OARPPacket::OARPPacket( const unsigned char* end, const struct myarphdr* data, QObject* parent )
            :QObject( parent, "ARP" ), _arphdr( data )
 {
     qDebug( "OARPPacket::OARPPacket(): decoding ARP header..." );
     qDebug( "ARP type seems to be %02d - '%s'", EXTRACT_16BITS( &_arphdr->ar_op ), (const char*) type() );
     qDebug( "Sender: MAC %s = IP %s", (const char*) senderMacAddress().toString(), (const char*) senderIPV4Address().toString() );
     qDebug( "Target: MAC %s = IP %s", (const char*) targetMacAddress().toString(), (const char*) targetIPV4Address().toString() );
 }
 
 
 OARPPacket::~OARPPacket()
@@ -1005,256 +1009,273 @@ OLLCPacket::~OLLCPacket()
 }
 
 
 /*======================================================================================
  * OWaveLanControlPacket
  *======================================================================================*/
 
 OWaveLanControlPacket::OWaveLanControlPacket( const unsigned char* end, const struct ieee_802_11_control_header* data, OWaveLanPacket* parent )
                 :QObject( parent, "802.11 Control" ), _header( data )
 {
     qDebug( "OWaveLanControlPacket::OWaveLanDataControl(): decoding frame..." );
     //TODO: Implement this
 }
 
 
 OWaveLanControlPacket::~OWaveLanControlPacket()
 {
 }
 
 
 /*======================================================================================
  * OPacketCapturer
  *======================================================================================*/
 
 OPacketCapturer::OPacketCapturer( QObject* parent, const char* name )
                  :QObject( parent, name ), _name( QString::null ), _open( false ),
                  _pch( 0 ), _pcd( 0 ), _sn( 0 )
 {
 }
 
 
 OPacketCapturer::~OPacketCapturer()
 {
     if ( _open )
     {
         qDebug( "OPacketCapturer::~OPacketCapturer(): pcap still open, autoclosing." );
         close();
     }
 }
 
 
 void OPacketCapturer::setBlocking( bool b )
 {
     if ( pcap_setnonblock( _pch, 1-b, _errbuf ) != -1 )
     {
         qDebug( "OPacketCapturer::setBlocking(): blocking mode changed successfully." );
     }
     else
     {
         qDebug( "OPacketCapturer::setBlocking(): can't change blocking mode: %s", _errbuf );
     }
 }
 
 
 bool OPacketCapturer::blocking() const
 {
     int b = pcap_getnonblock( _pch, _errbuf );
     if ( b == -1 )
     {
         qDebug( "OPacketCapturer::blocking(): can't get blocking mode: %s", _errbuf );
         return -1;
     }
     return !b;
 }
 
 
 void OPacketCapturer::closeDumpFile()
 {
     if ( _pcd )
     {
         pcap_dump_close( _pcd );
         _pcd = 0;
     }
     pcap_close( _pch );
 }
 
 
 void OPacketCapturer::close()
 {
     if ( _open )
     {
         if ( _sn )
         {
             _sn->disconnect( SIGNAL( activated(int) ), this, SLOT( readyToReceive() ) );
             delete _sn;
         }
         closeDumpFile();
     _open = false;
     }
 
     qDebug( "OPacketCapturer::close() --- dumping capturing statistics..." );
     qDebug( "--------------------------------------------------" );
     for( QMap<QString,int>::Iterator it = _stats.begin(); it != _stats.end(); ++it )
         qDebug( "%s : %d", (const char*) it.key(), it.data() );
     qDebug( "--------------------------------------------------" );
 
 }
 
 
 int OPacketCapturer::dataLink() const
 {
     return pcap_datalink( _pch );
 }
 
 
 void OPacketCapturer::dump( OPacket* p )
 {
     if ( !_pcd )
     {
         qWarning( "OPacketCapturer::dump() - cannot dump without open capture file!" );
         return;
     }
     pcap_dump( (u_char*) _pcd, &p->_hdr, p->_data );
 }
 
 
 int OPacketCapturer::fileno() const
 {
     if ( _open )
     {
         return pcap_fileno( _pch );
     }
     else
     {
         return -1;
     }
 }
 
+
+OPacket* OPacketCapturer::next( int time )
+{
+    fd_set fds;
+    struct timeval tv;
+    FD_ZERO( &fds );
+    FD_SET( pcap_fileno( _pch ), &fds );
+    tv.tv_sec = time / 1000;
+    tv.tv_usec = time % 1000;
+    int retval = select( 1, &fds, NULL, NULL, &tv);
+    if ( retval > 0 ) // clear to read!
+        return next();
+    else
+        return 0;
+}
+
+
 OPacket* OPacketCapturer::next()
 {
     packetheaderstruct header;
     qDebug( "==> OPacketCapturer::next()" );
     const unsigned char* pdata = pcap_next( _pch, &header );
     qDebug( "<== OPacketCapturer::next()" );
 
     if ( pdata && header.len )
     {
         OPacket* p = new OPacket( dataLink(), header, pdata, 0 );
         // packets shouldn't be inserted in the QObject child-parent hierarchy,
         // because due to memory constraints they will be deleted as soon
         // as possible - that is right after they have been processed
         // by emit() [ see below ]
         //TODO: make gathering statistics optional, because it takes time
         p->updateStats( _stats, const_cast<QObjectList*>( p->children() ) );
         #ifndef NODEBUG
         p->dumpStructure( const_cast<QObjectList*>( p->children() ) );
         #endif
         return p;
     }
     else
     {
         qWarning( "OPacketCapturer::next() - no packet received!" );
         return 0;
     }
 }
 
 
 bool OPacketCapturer::open( const QString& name )
 {
     if ( _open )
     {
         if ( name == _name )    // ignore opening an already openend device
         {
             return true;
         }
         else                    // close the last opened device
         {
             close();
         }
     }
 
     _name = name;
 
     // open libpcap
     pcap_t* handle = pcap_open_live( const_cast<char*>( (const char*) name ), 1024, 0, 0, &_errbuf[0] );
 
     if ( !handle )
     {
         qWarning( "OPacketCapturer::open(): can't open libpcap with '%s': %s", (const char*) name, _errbuf );
         return false;
     }
 
     qDebug( "OPacketCapturer::open(): libpcap [%s] opened successfully.", (const char*) name );
     _pch = handle;
     _open = true;
     _stats.clear();
 
     // in case we have an application object, create a socket notifier
     if ( qApp ) //TODO: I don't like this here...
     {
         _sn = new QSocketNotifier( fileno(), QSocketNotifier::Read );
         connect( _sn, SIGNAL( activated(int) ), this, SLOT( readyToReceive() ) );
     }
 
     return true;
 }
 
 
 bool OPacketCapturer::openDumpFile( const QString& filename )
 {
     pcap_dumper_t* dump = pcap_dump_open( _pch, const_cast<char*>( (const char*) filename ) );
     if ( !dump )
     {
         qWarning( "OPacketCapturer::open(): can't open dump with '%s': %s", (const char*) filename, _errbuf );
         return false;
     }
     qDebug( "OPacketCapturer::open(): dump [%s] opened successfully.", (const char*) filename );
     _pcd = dump;
 
     return true;
 }
 
 
 bool OPacketCapturer::open( const QFile& file )
 {
     QString name = file.name();
 
     if ( _open )
     {
         close();
         if ( name == _name )    // ignore opening an already openend device
         {
             return true;
         }
         else                    // close the last opened device
         {
             close();
         }
     }
 
     _name = name;
 
     pcap_t* handle = pcap_open_offline( const_cast<char*>( (const char*) name ), &_errbuf[0] );
 
     if ( handle )
     {
         qDebug( "OPacketCapturer::open(): libpcap opened successfully." );
         _pch = handle;
         _open = true;
 
         // in case we have an application object, create a socket notifier
         if ( qApp )
         {
             _sn = new QSocketNotifier( fileno(), QSocketNotifier::Read );
             connect( _sn, SIGNAL( activated(int) ), this, SLOT( readyToReceive() ) );
         }
 
         return true;
     }
     else
     {
         qDebug( "OPacketCapturer::open(): can't open libpcap with '%s': %s", (const char*) name, _errbuf );
         return false;
     }
 
 }
diff --git a/libopie2/opienet/opcap.h b/libopie2/opienet/opcap.h
index 51f067a..54b256b 100644
--- a/libopie2/opienet/opcap.h
+++ b/libopie2/opienet/opcap.h
@@ -480,183 +480,188 @@ class OUDPPacket : public QObject
   Q_OBJECT
 
   public:
     OUDPPacket( const unsigned char*, const struct udphdr*, QObject* parent = 0 );
     virtual ~OUDPPacket();
 
     int fromPort() const;
     int toPort() const;
     int length() const;
     int checksum() const;
 
   private:
     const struct udphdr* _udphdr;
 };
 
 /*======================================================================================
  * ODHCPPacket
  *======================================================================================*/
 
 class ODHCPPacket : public QObject
 {
   Q_OBJECT
 
   public:
     ODHCPPacket( const unsigned char*, const struct dhcp_packet*, QObject* parent = 0 );
     virtual ~ODHCPPacket();
 
     QHostAddress clientAddress() const;
     QHostAddress yourAddress() const;
     QHostAddress serverAddress() const;
     QHostAddress relayAddress() const;
 
     OMacAddress clientMacAddress() const;
 
     bool isRequest() const;
     bool isReply() const;
     QString type() const;
 
   private:
     const struct dhcp_packet* _dhcphdr;
     unsigned char _type;
 };
 
 /*======================================================================================
  * OTCPPacket
  *======================================================================================*/
 
 class OTCPPacket : public QObject
 {
   Q_OBJECT
 
   public:
     OTCPPacket( const unsigned char*, const struct tcphdr*, QObject* parent = 0 );
     virtual ~OTCPPacket();
 
     int fromPort() const;
     int toPort() const;
     int seq() const;
     int ack() const;
     int window() const;
     int checksum() const;
 
   private:
     const struct tcphdr* _tcphdr;
 };
 
 
 /*======================================================================================
  * OPacketCapturer
  *======================================================================================*/
 
 /**
  * @brief A class based wrapper for network packet capturing.
  *
  * This class is the base of a high-level interface to the well known packet capturing
  * library libpcap.
  * @see http://tcpdump.org
  */
 class OPacketCapturer : public QObject
 {
   Q_OBJECT
 
   public:
     /**
      * Constructor.
      */
     OPacketCapturer( QObject* parent = 0, const char* name = 0 );
     /**
      * Destructor.
      */
     ~OPacketCapturer();
     /**
      * Set the packet capturer to use blocking or non-blocking IO. This can be useful when
      * not using the socket notifier, e.g. without an application object.
      */
     void setBlocking( bool );
     /**
      * @returns true if the packet capturer uses blocking IO calls.
      */
     bool blocking() const;
     /**
      * Close the packet capturer. This is automatically done in the destructor.
      */
     void close();
     /**
      * Close the output capture file.
      */
     void closeDumpFile();
     /**
      * @returns the data link type.
      * @see <pcap.h> for possible values.
      */
     int dataLink() const;
     /**
      * Dump a packet to the output capture file.
      */
     void dump( OPacket* );
     /**
      * @returns the file descriptor of the packet capturer. This is only useful, if
      * not using the socket notifier, e.g. without an application object.
      */
     int fileno() const;
     /**
      * @returns the next @ref OPacket from the packet capturer.
      * @note If blocking mode is true then this call might block.
      */
     OPacket* next();
     /**
+     * @returns the next @ref OPacket from the packet capturer, if
+     * one arrives within @a time milliseconds.
+     */
+    OPacket* next( int time );
+    /**
      * Open the packet capturer to capture packets in live-mode from @a interface.
      */
     bool open( const QString& interface );
     /**
      * Open the packet capturer to capture packets in offline-mode from @a file.
      */
     bool open( const QFile& file );
     /**
      * Open a prerecorded tcpdump compatible capture file for use with @ref dump()
      */
     bool openDumpFile( const QString& filename );
     /**
      * @returns true if the packet capturer is open
      */
     bool isOpen() const;
     /**
      * @returns the snapshot length of this packet capturer
      */
     int snapShot() const;
     /**
      * @returns true if the input capture file has a different byte-order
      * than the byte-order of the running system.
      */
     bool swapped() const;
     /**
      * @returns the libpcap version string used to write the input capture file.
      */
     QString version() const;
     /**
      * @returns the packet statistic database.
      * @see QMap
      */
     const QMap<QString,int>& statistics() const;
 
   signals:
     /**
      * This signal is emitted, when a packet has been received.
      */
     void receivedPacket( OPacket* );
 
   protected slots:
     void readyToReceive();
 
   protected:
     QString _name;                                  // devicename
     bool _open;                                     // check this before doing pcap calls
     pcap_t* _pch;                                   // pcap library handle
     pcap_dumper_t* _pcd;                            // pcap dumper handle
     QSocketNotifier* _sn;                           // socket notifier for main loop
     mutable char _errbuf[PCAP_ERRBUF_SIZE];         // holds error strings from libpcap
     QMap<QString, int> _stats;                      // statistics;
 };
 
 #endif // OPCAP_H