frequency change works now

2 files changed, 29 insertions, 20 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 4b5a54e..4c33a0e 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -686,227 +686,223 @@ void ODevice::alarmSound ( )
 }
 
 /**
  * This plays a key sound
  */
 void ODevice::keySound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "keysound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This plays a touch sound
  */
 void ODevice::touchSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "touchsound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This method will return a list of leds
  * available on this device
  * @return a list of LEDs.
  */
 QValueList <OLed> ODevice::ledList ( ) const
 {
 	return QValueList <OLed> ( );
 }
 
 /**
  * This does return the state of the LEDs
  */
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
 	return QValueList <OLedState> ( );
 }
 
 /**
  * @return the state for a given OLed
  */
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
 	return Led_Off;
 }
 
 /**
  * Set the state for a LED
  * @param which Which OLed to use
  * @param st The state to set
  * @return success or failure
  */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
 	return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
 	return false;
 }
 
 /**
  * @return a value from the light senso
  */
 int ODevice::readLightSensor ( )
 {
 	return -1;
 }
 
 /**
  * @return the light sensor resolution whatever that is ;)
  */
 int ODevice::lightSensorResolution ( ) const
 {
 	return 0;
 }
 
 /**
  * @return a list with valid CPU frequency
  */
 QStrList &ODevice::cpuFrequencies ( ) const
 {
-qWarning("ODevice::cpuFrequencies: m_cpu_frequencies is %d", (int) d->m_cpu_frequencies);
 	return *d->m_cpu_frequencies;
 }
 
 
 /**
  * Set desired cpu frequency
  * 
  * @param index index into d->m_cpu_frequencies of the frequency to be set
  */
 bool ODevice::setCpuFrequency(uint index)
 {
 	if (index >= d->m_cpu_frequencies->count())
 		return false;
 
 	char *freq = d->m_cpu_frequencies->at(index);
 	qWarning("set freq to %s", freq);
 
-	//TODO: do the change in /proc/sys/cpu/0/speed
+	int fd;
 
-	return false;
+	if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
+		char writeCommand[50];
+		const int count = sprintf(writeCommand, "%s\n", freq);
+		int res = (::write(fd, writeCommand, count) != -1);
+		::close(fd);
+		return res;
 }
 
-/**
- * Returns current frequency index out of d->m_cpu_frequencies
- */
-uint ODevice::cpuFrequency() const
-{
-	// TODO: get freq from /proc/sys/cpu/0/speed and return index
-
-	return 0;
+	return false;
 }
 
 
-
 /**
  * @return a list of hardware buttons
  */
 const QValueList <ODeviceButton> &ODevice::buttons ( )
 {
 	initButtons ( );
 
 	return *d-> m_buttons;
 }
 
 /**
  * @return The amount of time that would count as a hold
  */
 uint ODevice::buttonHoldTime ( ) const
 {
 	return d-> m_holdtime;
 }
 
 /**
  * This method return a ODeviceButton for a key code
  * or 0 if no special hardware button is available for the device
  *
  * @return The devicebutton or 0l
  * @see ODeviceButton
  */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
 	initButtons ( );
 
 	for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) {
 		if ( (*it). keycode ( ) == code )
 			return &(*it);
 	}
 	return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
 	initButtons ( );
 
 	Config cfg ( "ButtonSettings" );
 
 	for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) {
 		ODeviceButton &b = ( *d-> m_buttons ) [i];
 		QString group = "Button" + QString::number ( i );
 
 		QCString pch, hch;
 		QCString pm, hm;
 		QByteArray pdata, hdata;
 
 		if ( cfg. hasGroup ( group )) {
 			cfg. setGroup ( group );
 			pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
 			pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
 			// pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
 			hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
 			hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
 			// hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
 		}
 
 		b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
 		b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
 	}
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
 	initButtons ( );
 
 	QString mb_chan;
 
 	if ( button >= (int) d-> m_buttons-> count ( ))
 		return;
 
 	ODeviceButton &b = ( *d-> m_buttons ) [button];
         b. setPressedAction ( action );
 
 	mb_chan=b. pressedAction ( ). channel ( );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
 	buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
 	initButtons ( );
 
 	if ( button >= (int) d-> m_buttons-> count ( ))
@@ -1899,259 +1895,272 @@ bool SIMpad::suspend ( ) // Must override because SIMpad does NOT have apm
 bool SIMpad::setSoftSuspend ( bool soft )
 {
 	qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
 	return false;
 }
 
 
 bool SIMpad::setDisplayStatus ( bool on )
 {
 	qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
 	bool res = false;
 	int fd;
 
 	QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
 
 	if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 		res = ( ::system( (const char*) cmdline ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
 	qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
 	bool res = false;
 	int fd;
 
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 
 	if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
 		int value = 255 - bright;
 		const int mask = SIMPAD_BACKLIGHT_MASK;
 		value = value << 8;
 		value += mask;
 		char writeCommand[100];
 		const int count = sprintf( writeCommand, "0x%x\n", value );
 		res = ( ::write ( fd, writeCommand, count ) != -1 );
 		::close ( fd );
 	}
 	return res;
 }
 
 
 int SIMpad::displayBrightnessResolution ( ) const
 {
 	switch ( model ( )) {
 		case Model_SIMpad_CL4:
 		case Model_SIMpad_SL4:
 		case Model_SIMpad_SLC:
 		case Model_SIMpad_TSinus:
 			return 255; //TODO find out if this is save
 
 		default:
 			return 2;
 	}
 }
 
 /**************************************************
  *
  * Ramses
  *
  **************************************************/
 
 void Ramses::init()
 {
 	d->m_vendorstr = "M und N";
 	d->m_vendor = Vendor_MundN;
 
 	QFile f("/proc/sys/board/ramses");
 
 	d->m_modelstr = "Ramses";
 	d->m_model = Model_Ramses_MNCI;
 
 	d->m_rotation = Rot0;
 	d->m_holdtime = 1000;
 
 	f.setName("/etc/oz_version");
 
 	if (f.open(IO_ReadOnly)) {
 	   	d->m_systemstr = "OpenEmbedded/Ramses";
 	    	d->m_system = System_OpenZaurus;
 
 		QTextStream ts(&f);
 		ts.setDevice(&f);
 		d->m_sysverstr = ts.readLine();
 		f.close();
 	}
 
 	m_power_timer = 0;
 
-qWarning("adding freq");
-	d->m_cpu_frequencies->append("100");
-	d->m_cpu_frequencies->append("200");
-	d->m_cpu_frequencies->append("300");
-	d->m_cpu_frequencies->append("400");
+#ifdef QT_QWS_ALLOW_OVERCLOCK
+#warning *** Overclocking enabled - this may fry your hardware - you have been warned ***
+#define OC(x...)        x
+#else
+#define OC(x...)
+#endif
+
+
+	// This table is true for a Intel XScale PXA 255
+
+	d->m_cpu_frequencies->append("99000");      // mem= 99, run= 99, turbo= 99, PXbus= 50
+OC(	d->m_cpu_frequencies->append("118000"); )   // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem
+	d->m_cpu_frequencies->append("199100");     // mem= 99, run=199, turbo=199, PXbus= 99
+OC(	d->m_cpu_frequencies->append("236000"); )   // mem=118, run=236, turbo=236, PXbus=118 OC'd mem
+	d->m_cpu_frequencies->append("298600");     // mem= 99, run=199, turbo=298, PXbus= 99
+OC(	d->m_cpu_frequencies->append("354000"); )   // mem=118, run=236, turbo=354, PXbus=118 OC'd mem
+	d->m_cpu_frequencies->append("398099");     // mem= 99, run=199, turbo=398, PXbus= 99
+	d->m_cpu_frequencies->append("398100");     // mem= 99, run=398, turbo=398, PXbus=196
+OC(	d->m_cpu_frequencies->append("471000"); )   // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus
+
 }
 
 bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat)
 {
         Q_UNUSED( keycode );
         Q_UNUSED( modifiers );
         Q_UNUSED( isPress );
         Q_UNUSED( autoRepeat );
 	return false;
 }
 
 void Ramses::timerEvent(QTimerEvent *)
 {
 	killTimer(m_power_timer);
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false);
 	QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false);
 }
 
 
 bool Ramses::setSoftSuspend(bool soft)
 {
 	qDebug("Ramses::setSoftSuspend(%d)", soft);
 #if 0
 	bool res = false;
 	int fd;
 
 	if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) ||
         ((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) {
 
 		int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources
 
 		if (sources >= 0) {
 			if (soft)
 				sources &= ~APM_EVT_POWER_BUTTON;
 			else
 				sources |= APM_EVT_POWER_BUTTON;
 
 			if (::ioctl(fd, APM_IOCSEVTSRC, sources) >= 0) // set new event sources
 				res = true;
 			else
 				perror("APM_IOCGEVTSRC");
 		}
 		else
 			perror("APM_IOCGEVTSRC");
 
 		::close(fd);
 	}
 	else
 		perror("/dev/apm_bios or /dev/misc/apm_bios");
 
     return res;
 #else
     return true;
 #endif
 }
 
 bool Ramses::suspend ( )
 {
 	qDebug("Ramses::suspend");
 	return false;
 }
 
 /**
  * This sets the display on or off
  */
 bool Ramses::setDisplayStatus(bool on)
 {
 	qDebug("Ramses::setDisplayStatus(%d)", on);
 #if 0
 	bool res = false;
 	int fd;
 
 	if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) {
 		res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0);
 		::close(fd);
 	}
 	return res;
 #else
 	return true;
 #endif
 }
 
 
 /*
  * We get something between 0..255 into us
 */
 bool Ramses::setDisplayBrightness(int bright)
 {
 	qDebug("Ramses::setDisplayBrightness(%d)", bright);
 	bool res = false;
 	int fd;
 
 	// pwm1 brighness: 20 steps 500..0 (dunkel->hell)
 
 	if (bright > 255 )
 		bright = 255;
 	if (bright < 0)
 		bright = 0;
 
 	// Turn backlight completely off
 	if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) {
 		char writeCommand[10];
 		const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0);
 		res = (::write(fd, writeCommand, count) != -1);
 		::close(fd);
 	}
 
 	// scale backlight brightness to hardware
 	bright = 500-(bright * 500 / 255);
 	if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) {
 		qDebug(" %d -> pwm1", bright);
 		char writeCommand[100];
 		const int count = sprintf(writeCommand, "%d\n", bright);
 		res = (::write(fd, writeCommand, count) != -1);
 		::close(fd);
 	}
 	return res;
 }
 
 
 int Ramses::displayBrightnessResolution() const
 {
 	return 32;
 }
 
 bool Ramses::setDisplayContrast(int contr)
 {
 	qDebug("Ramses::setDisplayContrast(%d)", contr);
 	bool res = false;
 	int fd;
 
 	// pwm0 contrast: 20 steps 79..90 (dunkel->hell)
 
 	if (contr > 255 )
 		contr = 255;
 	if (contr < 0)
 		contr = 0;
 	contr = 90 - (contr * 20 / 255);
 
 	if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
 		qDebug(" %d -> pwm0", contr);
 		char writeCommand[100];
 		const int count = sprintf(writeCommand, "%d\n", contr);
 		res = (::write(fd, writeCommand, count) != -1);
 		res = true;
 		::close(fd);
-	} else {
-		qWarning("no write");
 	}
 	return res;
 }
 
 
 int Ramses::displayContrastResolution() const
 {
 	return 20;
 }
diff --git a/libopie/odevice.h b/libopie/odevice.h
index 7f6f856..18ff5f1 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -107,143 +107,143 @@ enum OLed {
 	Led_Power,
 	Led_BlueTooth
 };
 
 enum OHardKey {
 	HardKey_Datebook  = Qt::Key_F9,
 	HardKey_Contacts  = Qt::Key_F10,
 	HardKey_Menu      = Qt::Key_F11,
 	HardKey_Home      = Qt::Key_F12,
 	HardKey_Mail      = Qt::Key_F13,
 	HardKey_Record    = Qt::Key_F24,
 	HardKey_Suspend   = Qt::Key_F34,
 	HardKey_Backlight = Qt::Key_F35,
 };
 
 enum ODirection {
 	CW   = 0,
 	CCW  = 1,
 	Flip = 2,
 };
 
 /**
  * A singleton which gives informations about device specefic option
  * like the Hardware used, LEDs, the Base Distribution and
  * hardware key mappings.
  *
  * @short A small class for device specefic options
  * @see QObject
  * @author Robert Griebl
  * @version 1.0
  */
 class ODevice : public QObject {
 	Q_OBJECT
 
 private:
         /* disable copy */
 	ODevice ( const ODevice & );
 
 protected:
 	ODevice ( );
 	virtual void init ( );
 	virtual void initButtons ( );
 
 	ODeviceData *d;
 
 public:
 	// sandman do we want to allow destructions? -zecke?
 	virtual ~ODevice ( );
 
 	static ODevice *inst ( );
 
 	// information
 
 	QString modelString ( ) const;
 	OModel model ( ) const;
 	inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); }
 
 	QString vendorString ( ) const;
 	OVendor vendor ( ) const;
 
 	QString systemString ( ) const;
 	OSystem system ( ) const;
 
 	QString systemVersionString ( ) const;
 
 	Transformation rotation ( ) const;
 	ODirection direction ( ) const;
 
 // system
 
 	virtual bool setSoftSuspend ( bool on );
 	virtual bool suspend ( );
 
 	virtual bool setDisplayStatus ( bool on );
 	virtual bool setDisplayBrightness ( int brightness );
 	virtual int displayBrightnessResolution ( ) const;
 	virtual bool setDisplayContrast ( int contrast );
 	virtual int displayContrastResolution ( ) const;
 
 // input / output
         //FIXME playAlarmSound and al might be better -zecke
 	virtual void alarmSound ( );
 	virtual void keySound ( );
 	virtual void touchSound ( );
 
 	virtual QValueList <OLed> ledList ( ) const;
 	virtual QValueList <OLedState> ledStateList ( OLed led ) const;
 	virtual OLedState ledState ( OLed led ) const;
 	virtual bool setLedState ( OLed led, OLedState st );
 
 	virtual bool hasLightSensor ( ) const;
 	virtual int readLightSensor ( );
 	virtual int lightSensorResolution ( ) const;
 
 	QStrList &cpuFrequencies() const;
 	bool setCpuFrequency(uint index);
-	uint cpuFrequency() const;
+	int cpuFrequency() const;
 
 	/**
 	 * Returns the available buttons on this device.  The number and location
 	 * of buttons will vary depending on the device.  Button numbers will be assigned
 	 * by the device manufacturer and will be from most preferred button to least preffered
 	 * button.  Note that this list only contains "user mappable" buttons.
 	 */
 	const QValueList<ODeviceButton> &buttons ( );
 
 	/**
 	 * Returns the DeviceButton for the \a keyCode.  If \a keyCode is not found, it
 	 * returns 0L
 	 */
 	const ODeviceButton *buttonForKeycode ( ushort keyCode );
 
 	/**
 	 * Reassigns the pressed action for \a button.  To return to the factory
 	 * default pass an empty string as \a qcopMessage.
 	 */
 	void remapPressedAction ( int button, const OQCopMessage &qcopMessage );
 
 	/**
 	 * Reassigns the held action for \a button.  To return to the factory
 	 * default pass an empty string as \a qcopMessage.
 	 */
 	void remapHeldAction ( int button, const OQCopMessage &qcopMessage );
 
 	/**
 	 * How long (in ms) you have to press a button for a "hold" action
 	 */
 	uint buttonHoldTime ( ) const;
 
 signals:
 	void buttonMappingChanged ( );
 
 private slots:
 	void systemMessage ( const QCString &, const QByteArray & );
 
 protected:
 	void reloadButtonMapping ( );
 };
 
 }
 
 #endif