summaryrefslogtreecommitdiff
path: root/noncore/net/wellenreiter
authormickeyl <mickeyl>2003-01-04 17:18:59 (UTC)
committer mickeyl <mickeyl>2003-01-04 17:18:59 (UTC)
commit68400748895ca7c54ad312afdfe830150d53a801 (patch) (side-by-side diff)
treeef9e4c85fb8aac71b613af9766e5ca6c4bd58f51 /noncore/net/wellenreiter
parent059caec066275d75501471a49c5465fe4def59cf (diff)
downloadopie-68400748895ca7c54ad312afdfe830150d53a801.zip
opie-68400748895ca7c54ad312afdfe830150d53a801.tar.gz
opie-68400748895ca7c54ad312afdfe830150d53a801.tar.bz2
Try to gracefully shut down the card after sniffing... this is a temporary
hack until the colleagues implement this in libwellenreiter...
Diffstat (limited to 'noncore/net/wellenreiter') (more/less context) (ignore whitespace changes)
-rw-r--r--noncore/net/wellenreiter/README27
-rw-r--r--noncore/net/wellenreiter/gui/wellenreiter.cpp26
2 files changed, 41 insertions, 12 deletions
diff --git a/noncore/net/wellenreiter/README b/noncore/net/wellenreiter/README
index c04d30c..af2e611 100644
--- a/noncore/net/wellenreiter/README
+++ b/noncore/net/wellenreiter/README
@@ -1,64 +1,77 @@
/*************************************************************************/
/* W e l l e n r e i t e r I I */
/* =============================== */
/* */
-/* Version: Opie-ALPHA */
+ /* Version: Opie-ALPHA-January */
/*************************************************************************/
--------------------------------------------------
-Release Notes for Opie-ALPHA Version December 2002
+Release Notes for Opie-ALPHA Version January 2002
--------------------------------------------------
=====================
= Supported Devices =
=====================
* low-level orinoco_cs-based (including prism2 and spectrum_cs)
-* Supported Interfaces: wlan0 (yes, I know this is hardcoded and
- lame, but we're in a hurry and this can be configured soon...)
-
=====================
= Build =
=====================
To compile Wellenreiter within the Opie build environment, add the
following directories to $OPIEDIR/Makefile, e.g. to 'NONAPPS='
noncore/net/wellenreiter/libwellenreiter \
noncore/net/wellenreiter/daemon \
noncore/net/wellenreiter/contrib/orinoco_hopper \
noncore/net/wellenreiter/gui
./configure and rebuild. Note that you need libpcap in your toolchain.
+To compile Wellenreiter within the OZ build environment, add the
+following lines to $OPIEDIR/packages
+CONFIG_WELLENREITER noncore/net/wellenreiter/libwellenreiter libwellenreiter.pro
+CONFIG_WELLENREITER noncore/net/wellenreiter/daemon daemon.pro
+CONFIG_WELLENREITER noncore/net/wellenreiter/gui gui.pro
+CONFIG_WELLENREITER noncore/net/wellenreiter/contrib/orinoco_hopper orinoco_hopper.pro
+
+make -f Makefile.test clean-configs
+cd <BUILDROOT>
+make SUBDIRS=packages/opie package
+
=====================
= Install =
=====================
Alternatively, you can use our precompiled ipk. Get it from
-http://opie.net.wox.org/elan/current. You will also need libpcap.
+http://opie.net.wox.org/wellenreiter/current/. This also includes a recent libpcap.
=====================
= Run =
=====================
+There are two possible modes: <Manual> and <Automatic>. I suggest, you
+start with the <Automatic> Mode. This works just using the "Start"
+and "Stop" Pushbuttons in the Wellenreiter GUI. If this doesn't work,
+then use the following strategy:
+
1. Place card in monitor mode. This is device dependent.
Caution: Don't do this while you're logged in via ssh
or otherwise using the wireless interface - your connection
will freeze: The card can't be used normally when sniffing!
- For most orinoco-based cards this can be done using
+ For most orinoco-based cards this can be done using either
'iwpriv <interface> 2' or 'iwpriv <interface> 2 1'.
You can check if this works, by calling 'ifconfig <interface>'.
If you see 'Protocol: UNSPEC' and an unusual long MAC-Address,
then your card has been successfully set to the monitor mode.
2. Start a channel hopper. A wireless card has several channels
(e.g. radio frequencies) here it can listen for beacons.
Beacons are management data frames from other stations.
Remember, this is radio transmission, so the card has to be
"tuned" to a certain channel to be able to receive the beacons.
diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp
index b22c5cc..4ee9a35 100644
--- a/noncore/net/wellenreiter/gui/wellenreiter.cpp
+++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp
@@ -103,25 +103,25 @@ Wellenreiter::Wellenreiter( QWidget* parent, const char* name, WFlags fl )
else
{
int flags;
flags = fcntl( daemon_fd, F_GETFL, 0 );
fcntl( daemon_fd, F_SETFL, flags | O_NONBLOCK );
QSocketNotifier *sn = new QSocketNotifier( daemon_fd, QSocketNotifier::Read, parent );
connect( sn, SIGNAL( activated( int ) ), this, SLOT( dataReceived() ) );
}
// setup GUI
connect( button, SIGNAL( clicked() ), this, SLOT( buttonClicked() ) );
- button->setEnabled( false );
+ // button->setEnabled( false );
netview->setColumnWidthMode( 1, QListView::Manual );
if ( manufacturerdb )
netview->setManufacturerDB( manufacturerdb );
}
Wellenreiter::~Wellenreiter()
{
// no need to delete child widgets, Qt does it all for us
delete manufacturerdb;
@@ -226,29 +226,46 @@ void Wellenreiter::buttonClicked()
if ( daemonRunning )
{
daemonRunning = false;
logwindow->log( "(i) Daemon has been stopped." );
button->setText( "Start Scanning" );
// Stop daemon - ugly for now... later better
system( "killall orinoco_hopper" );
system( "killall wellenreiterd" );
- // FIXME: reset the card trying to get into a usable state again
+ // get configuration from config window
- // for now, just message the user
+ const QString& interface = configwindow->interfaceName->currentText();
+ const QString& cardtype = configwindow->deviceType->currentText();
+ const QString& interval = configwindow->hopInterval->cleanText();
+
+ // reset the card trying to get into a usable state again
+
+ QString cmdline;
+ cmdline.sprintf( "iwpriv %s monitor 1", (const char*) interface );
+ system( cmdline );
+ cmdline.sprintf( "iwpriv %s monitor 1 6", (const char*) interface );
+ system( cmdline );
+ cmdline.sprintf( "ifconfig %s -promisc", (const char*) interface );
+ system( cmdline );
+ cmdline.sprintf( "killall -14 dhcpcd" );
+ system( cmdline );
+ cmdline.sprintf( "killall -10 udhcpc" );
+
+ // message the user
- QMessageBox::information( this, "Wellenreiter/Opie", "You should reset your\ndevice before using it again." );
+ QMessageBox::information( this, "Wellenreiter/Opie", "Your wireless card\nshould now be usable again." );
}
else
{
logwindow->log( "(i) Daemon has been started." );
daemonRunning = true;
button->setText( "Stop Scanning" );
// get configuration from config window
const QString& interface = configwindow->interfaceName->currentText();
@@ -256,25 +273,24 @@ void Wellenreiter::buttonClicked()
const QString& interval = configwindow->hopInterval->cleanText();
if ( ( interface == "<select>" ) || ( cardtype == "<select>" ) )
{
QMessageBox::information( this, "Wellenreiter/Opie", "You must configure your\ndevice before scanning." );
return;
}
// set interface into monitor mode
/* Global::Execute definitely does not work very well with non-gui stuff! :( */
QString cmdline;
-
cmdline.sprintf( "iwpriv %s monitor 2", (const char*) interface );
system( cmdline );
cmdline.sprintf( "iwpriv %s monitor 2 1", (const char*) interface );
system( cmdline );
// start channel hopper
cmdline = "orinoco_hopper ";
cmdline += interface;
cmdline += " -i ";
cmdline += interval;
cmdline += " &";