| -rw-r--r-- | ChangeLog | 14 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice.h | 1 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 16 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.h | 2 |
4 files changed, 22 insertions, 11 deletions
@@ -9,69 +9,69 @@ * Wellenreiter: Remove Joining networks - use OpieStumbler for that (mickeyl) * Opie-Mobilemsg has gone unsupported - it never really worked and there will be a replacement (mickeyl) * Opie-Tabmanager has gone unsupported - it barely works and there is not much of a use of it anyway (mickeyl) * Checkbook: Added configuration option to use smaller font for checkbook transaction tab (hrw) * ZSafe: Made UI conform to Opie standards (drw) * Today Addressbook plugin: Fixed configuration to show/not show birthdays, use checkboxes for selection (hrw) * Opie-Console: Read initial fixed font configuration from qpe.conf (mickeyl) * Opie-PcmciaApplet: Configure insert/resume actions and bind unsupported cards (mickeyl) * SysInfo: Remove CPU tab and add Devices tab instead (mickeyl) * Opie-smb: Added Opie front end for Samba (ljp) * Opie-Bluetooth: Replace obex send implementation and patch libopieobex and the bluetoothapplet (Michael Haynie) - Fixed Bugs ---------- * #1377 - Suspend Powermanagement when switched to another VT (mickeyl) - We actually suspend the complete Opie now in that case. * #1384 - Battery status updated improperly when charging (skyhusker) * #1476 - Wrong order of application entries in the O-menu (skyhusker) * #1514 - Remove usage of cardmon/pcmcia picture in applications. pcmcia is now an inline picture (mickeyl) * #1535 - Missing line break and unnecessary location shown with Today-Calendar plugin (deller) * #1543 - Time Settings: "predict" tab is displayed twice after reopen (hrw) * #1546 - Battery applet popup is not always large enough to show jacket remaining info (skyhusker) * #1557 - Light&Power-Settings don't store warning intervall and warning levels (skyhusker) * #1565 - crash-fix in odevice.cpp while scanning the distribution table (deller) * #1614 - Make Opie-console start in $HOME instead of / (skyhusker) * #1635 - opie-today, datebook-plugin does not show notes (skyhusker) * #1665 - Opie-IRC displays the host prepended to the message when peer is using and ipv6 address (skyhusker) * #1666 - Opie-IRC does not allow to add !channels in config as autojoin ones (skyhusker) * #1667 - Opie-IRC does not show messages from !channel (skyhusker) * #1679 - Security PIN plugin is QVGA sized (hrw) * #1682 - Properly resize tab control in OTabWidget (drw) - * n.a. - always show volume and wireless applet popups inside visible screen (deller) + * n.a. - always show volume and wireless applet popups inside visible screen (deller) * n.a. - scale O-Menu-Applets appropriately (mickeyl) - * n.a. - libopienet: fix bugs in wireless scanning and setting SSID (skyhusker) - * n.a. - Wellenreiter: relax WE version matching test a bit (mickeyl) - * n.a. - scale BluezApplet appropriately and use larger icons (mickeyl) - * n.a. - memoryapplet: fix crash in memoryapplet on kernels without swap support (seneca cunningham) + * n.a. - libopienet: fix bugs in wireless scanning and setting SSID (skyhusker) + * n.a. - Wellenreiter: relax WE version matching test a bit (mickeyl) + * n.a. - scale BluezApplet appropriately and use larger icons (mickeyl) + * n.a. - memoryapplet: fix crash in memoryapplet on kernels without swap support (seneca cunningham) * n.a. - networksettings: ignore hostap control interfaces wifi* (mickeyl) * n.a. - Today Addressbook plugin fix configuration to show/not show birthdays, use checkboxes for selection (hrw) * n.a. - remove hardcoded font size from netsystemtime (hrw) * n.a. - remove hardcoded font size from checkbook graphs (hrw) * n.a. - Dagger - fixes for Sword 1.5.8, morph tag x-refs, closing last tab crash (drw) Internal -------- * Make BluezApplet use OTaskbarApplet (mickeyl) * libopiecore: rewrite OFileNotification to use the Linux 2.6 inotify interface (mickeyl) * libopiecore: add ODirNotification - recursive directory notifications (mickeyl) * libopienet: Skip hostap control interfaces 'wifi' and improve robustness in ONetworkInterface (mickeyl) * libopieui: Remove OVersatileView and OVersatileViewItem (mickeyl) * libopienet: Miscellaneous API cleanups (mickeyl) * libopiecore: Add linux pcmcia system abstraction classes (mickeyl) * libopiecore: ODevice now knows the default gfx driver to use (mteira,mickeyl) + * libopiecore: Add support for the Sharp SL-C3100 "Borzoi" (mickeyl) * Remove assumptions about default gfx driver ("Transformed") all over the place (mteira,mickeyl) - * fix / optimize number of scanned directories. (ljp) + * Fix / Optimize number of scanned directories (ljp) 2005-03-25 Opie 1.2.0 Fixed Bugs ---------- * #1613 - AdvancedFM - scale toolbar icons appropriately (drw) * #1620 - OFileSelector - show the button on press and not on press on hold (alwin) * #1473 - Opie-Eye - Same as #1620 but we lack a common FileSystem Button class (zecke) * n.a. - PackageManager - fix bug where messages show up multiple times in install dialog (drw) * n.a. - make qpeglobal.h include qglobal.h (zecke) 2005-03-20 Opie 1.2.0-rc1 diff --git a/libopie2/opiecore/device/odevice.h b/libopie2/opiecore/device/odevice.h index 76cf97d..0eed1c9 100644 --- a/libopie2/opiecore/device/odevice.h +++ b/libopie2/opiecore/device/odevice.h @@ -75,24 +75,25 @@ enum OModel { Model_Jornada_720 = ( Model_Jornada | 0x0002 ), Model_Zaurus = ( 2 << 16 ), Model_Zaurus_SL5000 = ( Model_Zaurus | 0x0001 ), Model_Zaurus_SL5500 = ( Model_Zaurus | 0x0002 ), Model_Zaurus_SLA300 = ( Model_Zaurus | 0x0003 ), Model_Zaurus_SLB600 = ( Model_Zaurus | 0x0004 ), Model_Zaurus_SLC7x0 = ( Model_Zaurus | 0x0005 ), Model_Zaurus_SL6000 = ( Model_Zaurus | 0x0006 ), Model_Zaurus_SLC3000 = ( Model_Zaurus | 0x0007 ), Model_Zaurus_SLC1000 = ( Model_Zaurus | 0x0008 ), + Model_Zaurus_SLC3100 = ( Model_Zaurus | 0x0009 ), Model_SIMpad = ( 3 << 16 ), Model_SIMpad_All = ( Model_SIMpad | 0xffff ), Model_SIMpad_CL4 = ( Model_SIMpad | 0x0001 ), Model_SIMpad_SL4 = ( Model_SIMpad | 0x0002 ), Model_SIMpad_SLC = ( Model_SIMpad | 0x0003 ), Model_SIMpad_TSinus = ( Model_SIMpad | 0x0004 ), Model_Ramses = ( 4 << 16 ), Model_Ramses_All = ( Model_Ramses | 0xffff ), diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index b7f3104..4a80a7e 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -1,16 +1,16 @@ /* This file is part of the Opie Project Copyright (C) 2002-2005 The Opie Team <opie-devel@handhelds.org> - =. + =. Copyright (C) 2002-2005 Michael 'Mickey' Lauer <mickey@Vanille.de> .=l. .>+-= _;:, .> :=|. This program is free software; you can .> <`_, > . <= redistribute it and/or modify it under :`=1 )Y*s>-.-- : the terms of the GNU Library General Public .="- .-=="i, .._ License as published by the Free Software - . .-<_> .<> Foundation; version 2 of the License. ._= =} : .%`+i> _;_. .i_,=:_. -<s. This program is distributed in the hope that + . -:. = it will be useful, but WITHOUT ANY WARRANTY; : .. .:, . . . without even the implied warranty of @@ -215,24 +215,27 @@ void Zaurus::init(const QString& cpu_info) } else if ( model == "Sharp-Collie" || model == "Collie" ) { d->m_model = Model_Zaurus_SL5500; d->m_modelstr = "Zaurus SL-5500 or SL-5000d"; } else if ( model == "SHARP Tosa" ) { d->m_model = Model_Zaurus_SL6000; d->m_modelstr = "Zaurus SL-6000"; } else if ( model == "SHARP Spitz" ) { d->m_model = Model_Zaurus_SLC3000; d->m_modelstr = "Zaurus SL-C3000"; } else if ( model == "SHARP Akita" ) { d->m_model = Model_Zaurus_SLC1000; d->m_modelstr = "Zaurus SL-C1000"; + } else if ( model == "SHARP Borzoi" ) { + d->m_model = Model_Zaurus_SLC3100; + d->m_modelstr = "Zaurus SL-C3100"; } else { d->m_model = Model_Zaurus_SL5500; d->m_modelstr = "Unknown Zaurus"; } // set path to backlight device in kernel 2.6 switch ( d->m_model ) { case Model_Zaurus_SLB600: // fallthrough case Model_Zaurus_SL5500: m_backlightdev = "/sys/class/backlight/locomo-backlight/"; break; @@ -241,24 +244,25 @@ void Zaurus::init(const QString& cpu_info) break; default: m_backlightdev = "/sys/class/backlight/corgi-bl/"; } // set initial rotation switch( d->m_model ) { case Model_Zaurus_SL6000: // fallthrough case Model_Zaurus_SLA300: d->m_rotation = Rot0; break; + case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: d->m_rotation = rotation(); d->m_direction = direction(); break; case Model_Zaurus_SLB600: // fallthrough case Model_Zaurus_SL5000: // fallthrough case Model_Zaurus_SL5500: // fallthrough default: d->m_rotation = Rot270; } @@ -287,24 +291,25 @@ void Zaurus::initButtons() return; d->m_buttons = new QValueList <ODeviceButton>; struct z_button * pz_buttons; int buttoncount; switch ( d->m_model ) { case Model_Zaurus_SL6000: pz_buttons = z_buttons_6000; buttoncount = ARRAY_SIZE(z_buttons_6000); break; + case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: if ( isQWS( ) ) { addPreHandler(this); // hinge-sensor-handler } pz_buttons = z_buttons_c700; buttoncount = ARRAY_SIZE(z_buttons_c700); break; default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); @@ -540,24 +545,25 @@ bool Zaurus::setDisplayStatus( bool on ) ::close( fd ); } } return res; } Transformation Zaurus::rotation() const { qDebug( "Zaurus::rotation()" ); Transformation rot; switch ( d->m_model ) { + case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: { OHingeStatus hs = readHingeSensor(); qDebug( "Zaurus::rotation() - hinge sensor = %d", (int) hs ); if ( hs == CASE_PORTRAIT ) rot = Rot0; else if ( hs == CASE_UNKNOWN ) rot = Rot270; else rot = Rot270; } break; // SLC7x0 needs a special case here, because we were able to set the W100 @@ -589,48 +595,52 @@ Transformation Zaurus::rotation() const default: rot = d->m_rotation; break; } return rot; } ODirection Zaurus::direction() const { ODirection dir; switch ( d->m_model ) { + case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: { OHingeStatus hs = readHingeSensor(); if ( hs == CASE_PORTRAIT ) dir = CCW; else if ( hs == CASE_UNKNOWN ) dir = CCW; else dir = CW; } break; case Model_Zaurus_SL6000: case Model_Zaurus_SLA300: case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: dir = d->m_direction; break; } return dir; } bool Zaurus::hasHingeSensor() const { - return d->m_model == Model_Zaurus_SLC7x0 || d->m_model == Model_Zaurus_SLC3000 || d->m_model == Model_Zaurus_SLC1000; + return d->m_model == Model_Zaurus_SLC7x0 || + d->m_model == Model_Zaurus_SLC3100 || + d->m_model == Model_Zaurus_SLC3000 || + d->m_model == Model_Zaurus_SLC1000; } OHingeStatus Zaurus::readHingeSensor() const { if (m_embedix) { int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK); if (handle == -1) { qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror return CASE_UNKNOWN; } @@ -662,25 +672,25 @@ OHingeStatus Zaurus::readHingeSensor() const } } /* * Take code from iPAQ device. * That way we switch the cursor directions depending on status of hinge sensor, eg. hardware direction. * I hope that is ok - Alwin */ bool Zaurus::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat ) { int newkeycode = keycode; - if (d->m_model != Model_Zaurus_SLC7x0 && d->m_model != Model_Zaurus_SLC3000 && d->m_model != Model_Zaurus_SLC1000) return false; + if ( !hasHingeSensor() ) return false; /* map cursor keys depending on the hinge status */ switch ( keycode ) { // Rotate cursor keys case Key_Left : case Key_Right: case Key_Up : case Key_Down : { if (rotation()==Rot90) { newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4; } diff --git a/libopie2/opiecore/device/odevice_zaurus.h b/libopie2/opiecore/device/odevice_zaurus.h index 4314aff..677e29f 100644 --- a/libopie2/opiecore/device/odevice_zaurus.h +++ b/libopie2/opiecore/device/odevice_zaurus.h @@ -1,16 +1,16 @@ /* This file is part of the Opie Project Copyright (C) 2002-2005 The Opie Team <opie-devel@handhelds.org> - =. + =. Copyright (C) 2002-2005 Michael 'Mickey' Lauer <mickey@Vanille.de> .=l. .>+-= _;:, .> :=|. This program is free software; you can .> <`_, > . <= redistribute it and/or modify it under :`=1 )Y*s>-.-- : the terms of the GNU Library General Public .="- .-=="i, .._ License as published by the Free Software - . .-<_> .<> Foundation; version 2 of the License. ._= =} : .%`+i> _;_. .i_,=:_. -<s. This program is distributed in the hope that + . -:. = it will be useful, but WITHOUT ANY WARRANTY; : .. .:, . . . without even the implied warranty of |