| -rw-r--r-- | libopie2/opiecore/device/odevice.h | 2 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 18 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.h | 3 |
3 files changed, 19 insertions, 4 deletions
diff --git a/libopie2/opiecore/device/odevice.h b/libopie2/opiecore/device/odevice.h index 0eed1c9..492c97b 100644 --- a/libopie2/opiecore/device/odevice.h +++ b/libopie2/opiecore/device/odevice.h @@ -212,25 +212,25 @@ struct default_button { char *pix; char *fpressedservice; char *fpressedaction; char *fheldservice; char *fheldaction; }; /** * A singleton which gives informations about device specefic option * like the Hardware used, LEDs, the Base Distribution and * hardware key mappings. * - * @short A small class for device specefic options + * @short A small class for device specific options * @see QObject * @author Robert Griebl * @version 1.0 */ class ODevice : public QObject { Q_OBJECT private: /* disable copy */ ODevice ( const ODevice & ); diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index a75f566..8a7e252 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -148,24 +148,25 @@ struct z_button z_buttons_6000 [] = { }; // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus // class up into individual classes. We would need three classes // // Zaurus-Collie (SA-model w/ 320x240 lcd, for SL5500 and SL5000) // Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600) // Zaurus-Corgi (PXA-model w/ 640x480 lcd, for C700, C750, C760, C860, C3000, C1000, C3100) // Zaurus-Tosa (PXA-model w/ 480x640 lcd, for SL6000) void Zaurus::init(const QString& cpu_info) { + qDebug( "Zaurus::init()" ); // Set the time to wait until the system is really suspended // the delta between apm --suspend and sleeping setAPMTimeOut( 15000 ); // generic distribution code already scanned /etc/issue at that point - // embedix releases contain "Embedix <version> | Linux for Embedded Devices" if ( d->m_sysverstr.contains( "embedix", false ) ) { d->m_vendorstr = "Sharp"; d->m_vendor = Vendor_Sharp; d->m_systemstr = "Zaurus"; d->m_system = System_Zaurus; @@ -250,24 +251,25 @@ void Zaurus::init(const QString& cpu_info) // set initial rotation switch( d->m_model ) { case Model_Zaurus_SL6000: // fallthrough case Model_Zaurus_SLA300: d->m_rotation = Rot0; break; case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: + initHingeSensor(); d->m_rotation = rotation(); d->m_direction = direction(); break; case Model_Zaurus_SLB600: // fallthrough case Model_Zaurus_SL5000: // fallthrough case Model_Zaurus_SL5500: // fallthrough default: d->m_rotation = Rot270; } // set default qte driver switch( d->m_model ) @@ -280,45 +282,45 @@ void Zaurus::init(const QString& cpu_info) } m_leds[0] = Led_Off; if ( m_embedix ) qDebug( "Zaurus::init() - Using the 2.4 Embedix HAL on a %s", (const char*) d->m_modelstr ); else qDebug( "Zaurus::init() - Using the 2.6 OpenZaurus HAL on a %s", (const char*) d->m_modelstr ); } void Zaurus::initButtons() { + qDebug( "Zaurus::initButtons()" ); if ( d->m_buttons ) return; d->m_buttons = new QValueList <ODeviceButton>; struct z_button * pz_buttons; int buttoncount; switch ( d->m_model ) { case Model_Zaurus_SL6000: pz_buttons = z_buttons_6000; buttoncount = ARRAY_SIZE(z_buttons_6000); break; case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: if ( isQWS( ) ) - { // setup hinge sensor stuff + { addPreHandler(this); - initHingeSensor(); } pz_buttons = z_buttons_c700; buttoncount = ARRAY_SIZE(z_buttons_c700); break; default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); break; } for ( int i = 0; i < buttoncount; i++ ) { struct z_button *zb = pz_buttons + i; @@ -592,24 +594,25 @@ Transformation Zaurus::rotation() const } break; case Model_Zaurus_SL6000: case Model_Zaurus_SLB600: case Model_Zaurus_SLA300: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: rot = d->m_rotation; break; } + qDebug( "Zaurus::rotation() - returning '%d'", rot ); return rot; } ODirection Zaurus::direction() const { ODirection dir; switch ( d->m_model ) { case Model_Zaurus_SLC3100: // fallthrough case Model_Zaurus_SLC3000: // fallthrough case Model_Zaurus_SLC1000: // fallthrough case Model_Zaurus_SLC7x0: { OHingeStatus hs = readHingeSensor(); @@ -696,48 +699,57 @@ OHingeStatus Zaurus::readHingeSensor() const return switch1 ? CASE_PORTRAIT : CASE_LANDSCAPE; } } } void Zaurus::initHingeSensor() { if ( m_embedix ) return; m_hinge.setName( "/dev/input/event0" ); if ( !m_hinge.open( IO_ReadOnly ) ) { - qDebug( "Zaurus::init() - Couldn't open /dev/input/event0 for read (%s)", strerror( errno ) ); + qWarning( "Zaurus::init() - Couldn't open /dev/input/event0 for read (%s)", strerror( errno ) ); return; } QSocketNotifier* sn = new QSocketNotifier( m_hinge.handle(), QSocketNotifier::Read, this ); QObject::connect( sn, SIGNAL(activated(int)), this, SLOT(hingeSensorTriggered()) ); + + qDebug( "Zaurus::init() - Hinge Sensor Initialization successfully completed" ); } void Zaurus::hingeSensorTriggered() { qDebug( "Zaurus::hingeSensorTriggered() - got event" ); struct input_event e; if ( ::read( m_hinge.handle(), &e, sizeof e ) > 0 ) { qDebug( "Zaurus::hingeSensorTriggered() - event has type %d, code %d, value %d", e.type, e.code, e.value ); if ( e.type != EV_SW ) return; if ( readHingeSensor() != CASE_UNKNOWN ) { qDebug( "Zaurus::hingeSensorTriggered() - got valid switch event, calling rotateDefault()" ); QCopChannel::send( "QPE/Rotation", "rotateDefault()" ); } } } +void Zaurus::systemMessage( const QCString &msg, const QByteArray & ) +{ + if ( msg == "deviceButtonMappingChanged()" ) { + reloadButtonMapping(); + } +} + /* * Take code from iPAQ device. * That way we switch the cursor directions depending on status of hinge sensor, eg. hardware direction. * I hope that is ok - Alwin */ bool Zaurus::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat ) { int newkeycode = keycode; if ( !hasHingeSensor() ) return false; /* map cursor keys depending on the hinge status */ diff --git a/libopie2/opiecore/device/odevice_zaurus.h b/libopie2/opiecore/device/odevice_zaurus.h index bf30bc6..8a66f9c 100644 --- a/libopie2/opiecore/device/odevice_zaurus.h +++ b/libopie2/opiecore/device/odevice_zaurus.h @@ -88,31 +88,34 @@ #define SHARP_FL_IOCTL_GET_STEP 102 // Vesa Standard #define FB_BLANK_UNBLANK 0 #define FB_BLANK_POWERDOWN 4 namespace Opie { namespace Core { namespace Internal { class Zaurus : public OAbstractMobileDevice, public QWSServer::KeyboardFilter { + Q_OBJECT + protected: virtual void init(const QString&); virtual void initButtons(); void initHingeSensor(); protected slots: void hingeSensorTriggered(); + void systemMessage( const QCString &msg, const QByteArray & ); public: virtual bool setDisplayBrightness( int b ); virtual bool setDisplayStatus( bool on ); virtual int displayBrightnessResolution() const; virtual void playAlarmSound(); virtual void playKeySound(); virtual void playTouchSound(); virtual QValueList <OLed> ledList() const; virtual QValueList <OLedState> ledStateList ( OLed led ) const; |