-rw-r--r-- | libopie/odevice.cpp | 4 | ||||
-rw-r--r-- | libopie/odevice.h | 2 |
2 files changed, 5 insertions, 1 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index d6e6892..993aedf 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -660,392 +660,394 @@ QString ODevice::systemVersionString ( ) const * @return the current Transformation */ Transformation ODevice::rotation ( ) const { return d-> m_rotation; } /** * @return the current rotation direction */ ODirection ODevice::direction ( ) const { return d-> m_direction; } /** * This plays an alarmSound */ void ODevice::alarmSound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); if ( snd. isFinished ( )) snd. play ( ); #endif } /** * This plays a key sound */ void ODevice::keySound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "keysound" ); if ( snd. isFinished ( )) snd. play ( ); #endif } /** * This plays a touch sound */ void ODevice::touchSound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "touchsound" ); if ( snd. isFinished ( )) snd. play ( ); #endif } /** * This method will return a list of leds * available on this device * @return a list of LEDs. */ QValueList <OLed> ODevice::ledList ( ) const { return QValueList <OLed> ( ); } /** * This does return the state of the LEDs */ QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const { return QValueList <OLedState> ( ); } /** * @return the state for a given OLed */ OLedState ODevice::ledState ( OLed /*which*/ ) const { return Led_Off; } /** * Set the state for a LED * @param which Which OLed to use * @param st The state to set * @return success or failure */ bool ODevice::setLedState ( OLed which, OLedState st ) { Q_UNUSED( which ) Q_UNUSED( st ) return false; } /** * @return if the device has a light sensor */ bool ODevice::hasLightSensor ( ) const { return false; } /** * @return a value from the light senso */ int ODevice::readLightSensor ( ) { return -1; } /** * @return the light sensor resolution whatever that is ;) */ int ODevice::lightSensorResolution ( ) const { return 0; } /** * @return a list with CPU frequencies supported by the hardware */ const QStrList &ODevice::allowedCpuFrequencies ( ) const { return *d->m_cpu_frequencies; } /** * Set desired CPU frequency - * + * * @param index index into d->m_cpu_frequencies of the frequency to be set */ bool ODevice::setCurrentCpuFrequency(uint index) { if (index >= d->m_cpu_frequencies->count()) return false; char *freq = d->m_cpu_frequencies->at(index); qWarning("set freq to %s", freq); int fd; if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) { char writeCommand[50]; const int count = sprintf(writeCommand, "%s\n", freq); int res = (::write(fd, writeCommand, count) != -1); ::close(fd); return res; } return false; } /** * @return a list of hardware buttons */ const QValueList <ODeviceButton> &ODevice::buttons ( ) { initButtons ( ); return *d-> m_buttons; } /** * @return The amount of time that would count as a hold */ uint ODevice::buttonHoldTime ( ) const { return d-> m_holdtime; } /** * This method return a ODeviceButton for a key code * or 0 if no special hardware button is available for the device * * @return The devicebutton or 0l * @see ODeviceButton */ const ODeviceButton *ODevice::buttonForKeycode ( ushort code ) { initButtons ( ); for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) { if ( (*it). keycode ( ) == code ) return &(*it); } return 0; } void ODevice::reloadButtonMapping ( ) { initButtons ( ); Config cfg ( "ButtonSettings" ); for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) { ODeviceButton &b = ( *d-> m_buttons ) [i]; QString group = "Button" + QString::number ( i ); QCString pch, hch; QCString pm, hm; QByteArray pdata, hdata; if ( cfg. hasGroup ( group )) { cfg. setGroup ( group ); pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( ); pm = cfg. readEntry ( "PressedActionMessage" ). latin1 ( ); // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" )); hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( ); hm = cfg. readEntry ( "HeldActionMessage" ). latin1 ( ); // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" )); } b. setPressedAction ( OQCopMessage ( pch, pm, pdata )); b. setHeldAction ( OQCopMessage ( hch, hm, hdata )); } } void ODevice::remapPressedAction ( int button, const OQCopMessage &action ) { initButtons ( ); QString mb_chan; if ( button >= (int) d-> m_buttons-> count ( )) return; ODeviceButton &b = ( *d-> m_buttons ) [button]; b. setPressedAction ( action ); mb_chan=b. pressedAction ( ). channel ( ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan); buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( )); // buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( ))); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::remapHeldAction ( int button, const OQCopMessage &action ) { initButtons ( ); if ( button >= (int) d-> m_buttons-> count ( )) return; ODeviceButton &b = ( *d-> m_buttons ) [button]; b. setHeldAction ( action ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( )); buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( )); // buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( ))); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } +void ODevice::virtual_hook( int id, void* data ) { +} /************************************************** * * iPAQ * **************************************************/ void iPAQ::init ( ) { d-> m_vendorstr = "HP"; d-> m_vendor = Vendor_HP; QFile f ( "/proc/hal/model" ); if ( f. open ( IO_ReadOnly )) { QTextStream ts ( &f ); d-> m_modelstr = "H" + ts. readLine ( ); if ( d-> m_modelstr == "H3100" ) d-> m_model = Model_iPAQ_H31xx; else if ( d-> m_modelstr == "H3600" ) d-> m_model = Model_iPAQ_H36xx; else if ( d-> m_modelstr == "H3700" ) d-> m_model = Model_iPAQ_H37xx; else if ( d-> m_modelstr == "H3800" ) d-> m_model = Model_iPAQ_H38xx; else if ( d-> m_modelstr == "H3900" ) d-> m_model = Model_iPAQ_H39xx; else d-> m_model = Model_Unknown; f. close ( ); } switch ( d-> m_model ) { case Model_iPAQ_H31xx: case Model_iPAQ_H38xx: d-> m_rotation = Rot90; break; case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: case Model_iPAQ_H39xx: default: d-> m_rotation = Rot270; break; } f. setName ( "/etc/familiar-version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "Familiar"; d-> m_system = System_Familiar; QTextStream ts ( &f ); d-> m_sysverstr = ts. readLine ( ). mid ( 10 ); f. close ( ); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "OpenEmbedded/iPaq"; d-> m_system = System_Familiar; QTextStream ts ( &f ); ts.setDevice ( &f ); d-> m_sysverstr = ts. readLine ( ); f. close ( ); } } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void iPAQ::initButtons ( ) { if ( d-> m_buttons ) return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d-> m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) { i_button *ib = ipaq_buttons + i; ODeviceButton b; if (( ib-> model & d-> m_model ) == d-> m_model ) { b. setKeycode ( ib-> code ); b. setUserText ( QObject::tr ( "Button", ib-> utext )); b. setPixmap ( Resource::loadPixmap ( ib-> pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction )); d-> m_buttons-> append ( b ); } } reloadButtonMapping ( ); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); } //#include <linux/h3600_ts.h> // including kernel headers is evil ... typedef struct { unsigned char OffOnBlink; /* 0=off 1=on 2=Blink */ unsigned char TotalTime; /* Units of 5 seconds */ unsigned char OnTime; /* units of 100m/s */ unsigned char OffTime; /* units of 100m/s */ } LED_IN; typedef struct { unsigned char mode; unsigned char pwr; unsigned char brightness; } FLITE_IN; diff --git a/libopie/odevice.h b/libopie/odevice.h index f2f6467..a232d69 100644 --- a/libopie/odevice.h +++ b/libopie/odevice.h @@ -115,134 +115,136 @@ enum OHardKey { HardKey_Home = Qt::Key_F12, HardKey_Mail = Qt::Key_F13, HardKey_Record = Qt::Key_F24, HardKey_Suspend = Qt::Key_F34, HardKey_Backlight = Qt::Key_F35, }; enum ODirection { CW = 0, CCW = 1, Flip = 2, }; /** * A singleton which gives informations about device specefic option * like the Hardware used, LEDs, the Base Distribution and * hardware key mappings. * * @short A small class for device specefic options * @see QObject * @author Robert Griebl * @version 1.0 */ class ODevice : public QObject { Q_OBJECT private: /* disable copy */ ODevice ( const ODevice & ); protected: ODevice ( ); virtual void init ( ); virtual void initButtons ( ); ODeviceData *d; public: // sandman do we want to allow destructions? -zecke? virtual ~ODevice ( ); static ODevice *inst ( ); // information QString modelString ( ) const; OModel model ( ) const; inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); } QString vendorString ( ) const; OVendor vendor ( ) const; QString systemString ( ) const; OSystem system ( ) const; QString systemVersionString ( ) const; Transformation rotation ( ) const; ODirection direction ( ) const; // system virtual bool setSoftSuspend ( bool on ); virtual bool suspend ( ); virtual bool setDisplayStatus ( bool on ); virtual bool setDisplayBrightness ( int brightness ); virtual int displayBrightnessResolution ( ) const; virtual bool setDisplayContrast ( int contrast ); virtual int displayContrastResolution ( ) const; // input / output //FIXME playAlarmSound and al might be better -zecke virtual void alarmSound ( ); virtual void keySound ( ); virtual void touchSound ( ); virtual QValueList <OLed> ledList ( ) const; virtual QValueList <OLedState> ledStateList ( OLed led ) const; virtual OLedState ledState ( OLed led ) const; virtual bool setLedState ( OLed led, OLedState st ); virtual bool hasLightSensor ( ) const; virtual int readLightSensor ( ); virtual int lightSensorResolution ( ) const; const QStrList &allowedCpuFrequencies() const; bool setCurrentCpuFrequency(uint index); /** * Returns the available buttons on this device. The number and location * of buttons will vary depending on the device. Button numbers will be assigned * by the device manufacturer and will be from most preferred button to least preffered * button. Note that this list only contains "user mappable" buttons. */ const QValueList<ODeviceButton> &buttons ( ); /** * Returns the DeviceButton for the \a keyCode. If \a keyCode is not found, it * returns 0L */ const ODeviceButton *buttonForKeycode ( ushort keyCode ); /** * Reassigns the pressed action for \a button. To return to the factory * default pass an empty string as \a qcopMessage. */ void remapPressedAction ( int button, const OQCopMessage &qcopMessage ); /** * Reassigns the held action for \a button. To return to the factory * default pass an empty string as \a qcopMessage. */ void remapHeldAction ( int button, const OQCopMessage &qcopMessage ); /** * How long (in ms) you have to press a button for a "hold" action */ uint buttonHoldTime ( ) const; signals: void buttonMappingChanged ( ); private slots: void systemMessage ( const QCString &, const QByteArray & ); protected: void reloadButtonMapping ( ); + /* ugly virtual hook */ + virtual void virtual_hook( int id, void* data ); }; } #endif |