1 files changed, 1 insertions, 1 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 58254a7..71ed9e4 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1398,257 +1398,257 @@ bool iPAQ::setSoftSuspend ( bool soft )
         int fd;
 
         if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
                 if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
                         res = true;
                 else
                         ::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
                 ::close ( fd );
         }
         else
                 ::perror ( "/proc/sys/ts/suspend_button_mode" );
 
         return res;
 }
 
 
 bool iPAQ::setDisplayBrightness ( int bright )
 {
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
         if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
                 FLITE_IN bl;
                 bl. mode = 1;
                 bl. pwr = bright ? 1 : 0;
                 bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
                 res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
                 ::close ( fd );
         }
         return res;
 }
 
 int iPAQ::displayBrightnessResolution ( ) const
 {
         switch ( model ( )) {
                 case Model_iPAQ_H31xx:
                 case Model_iPAQ_H36xx:
                 case Model_iPAQ_H37xx:
                                 return 128;  // really 256, but >128 could damage the LCD
 
                 case Model_iPAQ_H38xx:
                 case Model_iPAQ_H39xx:
                         return 64;
                 case Model_iPAQ_H5xxx:
                         return 255;
 
                 default:
                         return 2;
         }
 }
 
 
 bool iPAQ::hasLightSensor ( ) const
 {
         return true;
 }
 
 int iPAQ::readLightSensor ( )
 {
         int fd;
         int val = -1;
 
         if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
                 char buffer [8];
 
                 if ( ::read ( fd, buffer, 5 ) == 5 ) {
                         char *endptr;
 
                         buffer [4] = 0;
                         val = ::strtol ( buffer + 2, &endptr, 16 );
 
                         if ( *endptr != 0 )
                                 val = -1;
                 }
                 ::close ( fd );
         }
 
         return val;
 }
 
 int iPAQ::lightSensorResolution ( ) const
 {
         return 256;
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
 // Check whether this device is the sharp zaurus..
 bool Zaurus::isZaurus()
 {
 
         // If the special devices by embedix exist, it is quite simple: it is a Zaurus !
         if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
                 return true;
                 }
 
         // On non-embedix kernels, we have to look closer.
         bool is_zaurus = false;
         QFile f ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QString model;
                 QFile f ( "/proc/cpuinfo" );
 
                 QTextStream ts ( &f );
                 QString line;
                 while( line = ts. readLine ( ) ) {
                         if ( line. left ( 8 ) == "Hardware" )
                                 break;
                 }
                 int loc = line. find ( ":" );
                 if ( loc != -1 )
                         model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 
                 if ( model == "Sharp-Collie" 
                      || model == "Collie" 
                      || model == "SHARP Corgi"
                      || model == "SHARP Shepherd" 
                      || model == "SHARP Poodle" 
-                     || model == "SHARP Husky" )
+                     || model == "SHARP Husky"
                    )
                         is_zaurus = true;
 
           }
         return is_zaurus;
 }
 
 
 void Zaurus::init ( )
 {
         d-> m_vendorstr = "Sharp";
         d-> m_vendor = Vendor_Sharp;
         m_embedix = true;  // Not openzaurus means: It has an embedix kernel !
 
         // QFile f ( "/proc/filesystems" );
         QString model;
 
         // It isn't a good idea to check the system configuration to 
         // detect the distribution ! 
         // Otherwise it may happen that any other distribution is detected as openzaurus, just
         // because it uses a jffs2 filesystem..  
         // (eilers)
         // if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
         QFile f ("/etc/oz_version");
         if ( f.exists() ){
                 d-> m_vendorstr = "OpenZaurus Team";
                 d-> m_systemstr = "OpenZaurus";
                 d-> m_system = System_OpenZaurus;
 
                 if ( f. open ( IO_ReadOnly )) {
                         QTextStream ts ( &f );
                         d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
                         f. close ( );
                 }
 
                 // Openzaurus sometimes uses the embedix kernel!
                 // => Check whether this is an embedix kernel
                 FILE *uname = popen("uname -r", "r");
                 QString line;
                 if ( f.open(IO_ReadOnly, uname) ) {
                         QTextStream ts ( &f );
                         line = ts. readLine ( );
                         int loc = line. find ( "embedix" );
                         if ( loc != -1 )
                                 m_embedix = true;
                         else
                                 m_embedix = false;
                         f. close ( );
                 }
                 pclose(uname);
         }
         else {
                 d-> m_systemstr = "Zaurus";
                 d-> m_system = System_Zaurus;
         }
 
         f. setName ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QTextStream ts ( &f );
                 QString line;
                 while( line = ts. readLine ( ) ) {
                         if ( line. left ( 8 ) == "Hardware" )
                                 break;
                 }
                 int loc = line. find ( ":" );
                 if ( loc != -1 )
                         model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
         }
 
         if ( model == "SHARP Corgi" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C700";
         } else if ( model == "SHARP Shepherd" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C750";
         } else if ( model == "SHARP Husky" ) {
                 d-> m_model = Model_Zaurus_SLC7x0;
                 d-> m_modelstr = "Zaurus SL-C760";
         } else if ( model == "SHARP Poodle" ) {
                 d-> m_model = Model_Zaurus_SLB600;
                 d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
         } else if ( model == "Sharp-Collie" || model == "Collie" ) {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
         } else {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus (Model unknown)";
         }
 
         bool flipstate = false;
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLA300:
                         d-> m_rotation = Rot0;
                         break;
                 case Model_Zaurus_SLC7x0:
                         // Note: need to 1) set flipstate based on physical screen orientation
                         // and 2) check to see if the user overrode the rotation direction
                         // using appearance, and if so, remove that item from the Config to
                         // ensure the rotate applet flips us back to the previous state.
                         if ( flipstate ) {
                                 // 480x640
                                 d-> m_rotation = Rot0;
                                 d-> m_direction = CW;
                         } else {
                                 // 640x480
                                 d-> m_rotation = Rot270;
                                 d-> m_direction = CCW;
                         }
                         break;
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         d-> m_rotation = Rot270;
                         break;
         }
         m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons ( )
 {
         if ( d-> m_buttons )
                 return;
 
         d-> m_buttons = new QValueList <ODeviceButton>;
 
         struct z_button * pz_buttons;
         int buttoncount;