24 files changed, 139 insertions, 137 deletions

diff --git a/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp b/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp
index ef6878a..3df7f5c 100644
--- a/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp
+++ b/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp
@@ -1,164 +1,164 @@
 #include <qapplication.h>
 #include <resources.h>
 #include <OTDevice.h>
 #include <OTGateway.h>
 #include "bluetoothRFCOMMrun.h"
 
 using Opietooth2::OTGateway;
 using Opietooth2::OTDevice;
 using Opietooth2::OTDeviceAddress;
 
 BluetoothRFCOMMRun::~BluetoothRFCOMMRun( void ) {
       if( OT ) {
         OTGateway::releaseOTGateway();
       }
 }
 
 State_t BluetoothRFCOMMRun::detectState( void ) {
 
       if( ! OT ) {
         OT = OTGateway::getOTGateway();
       }
 
       if( deviceNrOfConnection() >= 0 ) {
         return Available;
       }
 
-      owarn << "Bluetooth " 
+      odebug << "Bluetooth " 
             << OT->isEnabled()
             << oendl;
 
       return ( OT->isEnabled() ) ? Off : Unavailable;
 }
 
 QString BluetoothRFCOMMRun::setMyState( NodeCollection *, 
                                       Action_t A, 
                                       bool ) {
 
       if( OT ) {
         OTGateway::getOTGateway();
       }
 
       if( A == Activate ) {
         // from OFF to Available
         RFCOMMChannel * Ch = getChannel( );
         System & Sys = NSResources->system();
  
         if( Ch ) {
           // connect to this peer
           DeviceNr = OT->getFreeRFCommDevice();
           QStringList S;
 
           S << "rfcomm" 
             << "bind"
             << QString().setNum( DeviceNr )
             << Ch->BDAddress
             << QString().setNum( Ch->Channel );
  
           if( Sys.runAsRoot( S ) ) {
             return QString( "Error starting %1").arg(S.join(" "));
           }
 
           // here rfcomm should be running -> we will detect state later
           return QString();
         } else {
           Log(( "No channel selected -> cancel\n" ));
           return QString( "No channel selected. Operation cancelled" );
         }
       }
 
       if( A == Deactivate ) {
         if( DeviceNr >= 0 ) {
           if( OT->releaseRFCommDevice( DeviceNr ) ) {
            return QString( "Cannot release RFCOMM connection" );
           }
           DeviceNr = -1;
         }
       }
       return QString();
 }
 
 #include <qlistbox.h>
 #include <qframe.h>
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qdialog.h>
 
 RFCOMMChannel * BluetoothRFCOMMRun::getChannel( void ) {
 
     if( Data->Devices.count() == 1 ) {
       // only one device -> return channel
       return Data->Devices[0];
     }
 
     RFCOMMChannel * Ch = 0;
     QDialog * Dlg = new QDialog( qApp->mainWidget(), 0, TRUE );
     QVBoxLayout * V = new QVBoxLayout( Dlg );
 
     QLabel * L = new QLabel( 
       qApp->translate( "BluetoothRFCOMMRun", 
                        "Select device to connect to"),
                        Dlg );
     QListBox * LB = new QListBox( Dlg );
 
     for( unsigned int i = 0; i < Data->Devices.count(); i ++ ) {
       LB->insertItem( QString( "%1 (%2 Chnl %3)" ).
                         arg( Data->Devices[i]->Name ).
                         arg( Data->Devices[i]->BDAddress ).
                         arg( Data->Devices[i]->Channel ) );
     }
 
     V->addWidget( L );
     V->addWidget( LB );
 
     Dlg->resize( 100, 100 );
     Dlg->move( 20, 
                (qApp->desktop()->height()-100)/2 );
 
     if( Dlg->exec() == QDialog::Accepted ) {
       unsigned int i = 0;
       for( i = 0; i < Data->Devices.count(); i ++ ) {
         if( LB->isSelected(i) ) {
-          owarn << "Selected " << Data->Devices[i]->Name << oendl;
+          odebug << "Selected " << Data->Devices[i]->Name << oendl;
           Ch = Data->Devices[i];
           break;
         }
       }
     }
 
     delete Dlg;
     return Ch;
 }
 
 QString BluetoothRFCOMMRun::deviceFile( void ) {
     if( deviceNrOfConnection() >= 0 ) {
       OTDevice * OTD = OT->getOTDevice();
       // there is a connection
       return OTD->getRFCommDevicePattern().arg(DeviceNr);
     }
     return QString();
 }
 
 int BluetoothRFCOMMRun::deviceNrOfConnection( void ) {
 
     if( ! OT ) {
       OT = OTGateway::getOTGateway();
     }
 
     DeviceNr = -1;
     for( unsigned int i = 0; i < Data->Devices.count(); i ++ ) {
-      owarn << "Check for rfcomm on " 
+      odebug << "Check for rfcomm on " 
             << Data->Devices[i]->BDAddress
             << " "
             << Data->Devices[i]->Channel
             << oendl;
       if( ( DeviceNr = OT->connectedToRFCommChannel( 
               OTDeviceAddress( Data->Devices[i]->BDAddress ),
               Data->Devices[i]->Channel ) ) >= 0 ) {
-        owarn << "Up " 
+        odebug << "Up " 
               << oendl;
         break;
       }
     }
     return DeviceNr;
 }
diff --git a/noncore/settings/networksettings2/bluetooth/config.in b/noncore/settings/networksettings2/bluetooth/config.in
index 398cff1..1a76f96 100644
--- a/noncore/settings/networksettings2/bluetooth/config.in
+++ b/noncore/settings/networksettings2/bluetooth/config.in
@@ -1,4 +1,4 @@
   config NS2BT
     boolean "opie-networksettings2plugin-bluetooth (set up BLUETOOTH)"
     default "n" if NS2
-    depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && NS2CORE && NS2OPIETOOTH
+    depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && NS2CORE && NS2OPIETOOTH && LIBBLUEZ_DEP
diff --git a/noncore/settings/networksettings2/config.in b/noncore/settings/networksettings2/config.in
index d2b5f26..0236bab 100644
--- a/noncore/settings/networksettings2/config.in
+++ b/noncore/settings/networksettings2/config.in
@@ -1,21 +1,21 @@
   source noncore/settings/networksettings2/networksettings2/config.in
   source noncore/settings/networksettings2/opietooth2/config.in
   source noncore/settings/networksettings2/opietooth2_applet/config.in
 
 config NS2
-  boolean
+  boolean "opie-networksettings2 application"
   default "y"
   depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && NS2CORE && NS2OPIETOOTH
 
   source noncore/settings/networksettings2/profile/config.in
   source noncore/settings/networksettings2/network/config.in
   source noncore/settings/networksettings2/lancard/config.in
   source noncore/settings/networksettings2/ppp/config.in
   source noncore/settings/networksettings2/wlan/config.in
   source noncore/settings/networksettings2/usb/config.in
   source noncore/settings/networksettings2/irda/config.in
   source noncore/settings/networksettings2/vpn/config.in
   source noncore/settings/networksettings2/bluetooth/config.in
   source noncore/settings/networksettings2/cable/config.in
   source noncore/settings/networksettings2/modem/config.in
   source noncore/settings/networksettings2/gprs/config.in
diff --git a/noncore/settings/networksettings2/editconnection.cpp b/noncore/settings/networksettings2/editconnection.cpp
index 0c3ead6..717d9e9 100644
--- a/noncore/settings/networksettings2/editconnection.cpp
+++ b/noncore/settings/networksettings2/editconnection.cpp
@@ -30,257 +30,256 @@ public:
     MyQCheckListItem( QCheckListItem *parent, const QString & S, Type T ) :
       QCheckListItem( parent, S, T ) { }
     MyQCheckListItem( QListViewItem *parent, const QString & S, Type T ) :
       QCheckListItem( parent, S, T ) { }
 
     MyQCheckListItem( QListView *parent, const QString & S ) :
       QCheckListItem( parent, S, QCheckListItem::Controller ) { }
     MyQCheckListItem( QCheckListItem *parent, const QString & S ) :
       QCheckListItem( parent, S, QCheckListItem::Controller ) { }
     MyQCheckListItem( QListViewItem *parent, const QString & S ) :
       QCheckListItem( parent, S, QCheckListItem::Controller ) { }
 
     virtual void paintCell( QPainter *p, const QColorGroup &cg,
                             int column, int width, int alignment );
 
 };
 
 void MyQCheckListItem::paintCell( QPainter *p, const QColorGroup &cg,
                                  int column, int width, int alignment )
 {
     QColorGroup _cg( cg );
     QColor c = _cg.text();
     if ( ! isSelectable() )
         _cg.setColor( QColorGroup::Text, Qt::lightGray );
     QCheckListItem::paintCell( p, _cg, column, width, alignment );
     _cg.setColor( QColorGroup::Text, c );
 }
 
 class MyQListViewItem : public QListViewItem
 {
 public:
     MyQListViewItem( QListView *parent, const QString & S ) :
       QListViewItem( parent, S ) { }
     MyQListViewItem( QListViewItem *parent, const QString & S ) :
       QListViewItem( parent, S ) { }
 
     virtual void paintCell( QPainter *p, const QColorGroup &cg,
                             int column, int width, int alignment );
 
 };
 
 void MyQListViewItem::paintCell( QPainter *p, const QColorGroup &cg,
                                  int column, int width, int alignment )
 {
     QColorGroup _cg( cg );
     QColor c = _cg.text();
     if ( ! isSelectable() )
         _cg.setColor( QColorGroup::Text, Qt::lightGray );
     QListViewItem::paintCell( p, _cg, column, width, alignment );
     _cg.setColor( QColorGroup::Text, c );
 }
 
 //
 //
 // REAL GUI
 //
 //
 
 bool EditConnection::AutoCollapse = 1;
 
 EditConnection::EditConnection( QWidget* parent ) :
       EditConnectionGUI( parent, 0, TRUE ), TmpCollection() {
 
       Tab_TB->setTabEnabled( Setup_FRM, FALSE );
       Setup_FRM->setEnabled( FALSE );
 
       TmpIsValid = 0;
       SelectedNodes = 0;
 
       AutoCollapse_CB->setChecked( AutoCollapse );
 
       Mapping = new QPtrDict<ANetNode>;
       Mapping->setAutoDelete( FALSE );
       Nodes_LV->header()->hide();
       // popluate tree with all NetNodes 
       buildFullTree();
 }
 
 NodeCollection * EditConnection::getTmpCollection( void ) {
 
       if( TmpIsValid ) 
         // content is stil OK
         return &(TmpCollection);
 
       // reset collection -> delete all NEW NetNodes
       for( QListIterator<ANetNodeInstance> it(TmpCollection);
            it.current();
            ++it ) {
         if( it.current()->isNew() ) {
           delete it.current();
         }
       }
       TmpCollection.clear();
 
       // update content
       QListViewItem * it = Nodes_LV->firstChild();
       ANetNode * NN;
 
       // start iter (if there is a collection)
       /*
 
           a node collection is sorted from the toplevel
           node to the deepest node
 
       */
       ANetNodeInstance * NNI = 
         (SelectedNodes) ? SelectedNodes->first() : 0 ;
 
       TmpCollection.setModified( 0 );
 
       // the listview always starts with the toplevel 
       // hierarchy.  This is always a controller item
       while ( it ) {
         NN = (*Mapping)[it];
         if( NN == 0 ) {
           // this item is a controller -> 
           // has radio items as children -> 
           // find selected one 
           it = it->firstChild();
           while( it ) {
             if( ((QCheckListItem *)it)->isOn() ) {
               // this radio is selected -> go deeper
               break;
             }
             it = it->nextSibling();
           }
 
           if( ! it ) {
-            owarn  << "Radio not selected" << oendl;
             TmpIsValid = 0;
             return 0;
           }
 
           // it now contains selected radio
           NN = (*Mapping)[it];
         }
 
         // NN here contains the netnode of the
         // current item -> this node needs to
         // be stored in the collection
         if( NNI == 0 ||
             it->text(0) != NNI->nodeClass()->name() ) {
           // new item not in previous collection
           ANetNodeInstance * NNI = NN->createInstance();
           NNI->initialize();
           // this node type not in collection
           TmpCollection.append( NNI );
           // master collection changed because new item in it
           TmpCollection.setModified( 1 );
           // no more valid items in old list
           NNI = 0;
         } else {
           // already in list -> copy pointer
           TmpCollection.append( NNI );
           NNI = SelectedNodes->next();
         }
 
         // go deeper to next level
         // this level is can be a new controller
         // or an item
         it = it->firstChild();
       }
 
       TmpIsValid = 1;
       return &(TmpCollection);
 }
 
 // pass a connection NodeCollection to be edited
 void EditConnection::setConnection( NodeCollection * NC ) {
       ANetNodeInstance * NNI;
       ANetNode * NN;
 
       SelectedNodes = NC;
       Name_LE->setText( NC->name() );
       NNI = NC->first();
 
       // show configure tabl
       Tab_TB->setCurrentPage( 1 );
 
       // valid colledction
       Tab_TB->setTabEnabled( Setup_FRM, FALSE );
       Setup_FRM->setEnabled( FALSE );
 
       // select items in collection
       QListViewItem * it = Nodes_LV->firstChild();
       bool Found;
 
       TmpIsValid = 0;
 
       while ( it ) {
         NN = (*Mapping)[it];
         if( NN == 0 ) {
           // this item is a controller -> 
           // has radio items as children -> 
           // find selected one 
           it = it->firstChild();
           Found = 0;
           while( it ) {
             if( NNI && it->text(0) == NNI->nodeClass()->name() ) {
               // this radio is part of the collection
               ((QCheckListItem *)it)->setOn( 1 );
               updateGUI( it, NNI->nodeClass() );
               // check its children
               Found = 1;
               it = it->firstChild();
               NNI = SelectedNodes->next();
               // do not bother to check other items
               break;
             }
             it = it->nextSibling();
           }
 
           if( ! Found ) {
             // this means that this level is NOT present in collection
             // probably INCOMPATIBEL collection OR Missing plugin
             QMessageBox::warning(
                 0, 
                 tr( "Error presentig Connection" ),
                 tr( "<p>Old connection or missing plugin \"<i>%1</i>\"</p>" ).
                     arg(NNI->nodeClass()->name()) );
             return;
           }
 
           // it now contains selected radio
           NN = (*Mapping)[it];
         } else {
           // automatic selection 
           if( NNI == 0 ||  it->text(0) != NNI->nodeClass()->name() ) {
             // should exist and be the same
             if( NNI ) {
               QMessageBox::warning(
                   0, 
                   tr( "Error presentig Connection" ),
                   tr( "<p>Old connection or missing plugin \"<i>%1</i>\"</p>" ).
                       arg(NNI->nodeClass()->name()) );
             } else {
               QMessageBox::warning(
                   0, 
                   tr( "Error presentig Connection" ),
                   tr( "<p>Missing connection\"<i>%1</i>\"</p>" ).
                       arg(it->text(0)) );
             }
             return;
           }
           it = it->firstChild();
         }
       }
 }
 
 // get result of editing (either new OR updated collection
 NodeCollection * EditConnection::connection( void ) {
 
       if( SelectedNodes == 0 ) {
         // new collection 
         SelectedNodes = new NodeCollection;
       }
 
diff --git a/noncore/settings/networksettings2/gprs/GPRSrun.cpp b/noncore/settings/networksettings2/gprs/GPRSrun.cpp
index e842b99..cccc71a 100644
--- a/noncore/settings/networksettings2/gprs/GPRSrun.cpp
+++ b/noncore/settings/networksettings2/gprs/GPRSrun.cpp
@@ -1,105 +1,105 @@
 #include <sys/types.h>
 #include <signal.h>
 #include <errno.h>
 #include <qdir.h>
 #include <system.h>
 #include <resources.h>
 #include <netnode.h>
 #include "GPRSrun.h"
 
 State_t GPRSRun::detectState( void ) { 
 
       // is pppd still running ?
       // is rfcomm still active
       NodeCollection * NC = nodeCollection();
       InterfaceInfo * I = NC->assignedInterface();
 
       QDir D("/var/run");
 
       if( I ) {
         // has some pppx attached
         return ( I->IsUp ) ? IsUp : Available;
       }
 
       // check ppp itself and figure out interface
 
-      owarn << "Check for ppp " << NC->name() << oendl;
+      odebug << "Check for ppp " << NC->name() << oendl;
       if( D.exists( QString("ppp-")+removeSpaces(NC->name())+".pid") ) {
         // get pid and check if pppd is still running
         QFile F( D.path()+"/ppp-"+removeSpaces(NC->name())+".pid");
 
-        owarn << "PPP PID " << F.name() << oendl;
+        odebug << "PPP PID " << F.name() << oendl;
         if( F.open( IO_ReadOnly ) ) {
           QTextStream TS(&F);
           QString X = TS.readLine();
           PPPPid = X.toULong();
           int rv;
 
           rv = ::kill( PPPPid, 0 );
           if( rv == 0 ||
               ( rv < 0 && errno == EPERM )
             ) {
             // pppd is still up
             X = TS.readLine();
             I = NSResources->system().findInterface(X);
 
-            owarn << "ppp running : IFace " << X << " = " << (long)I << oendl;
+            odebug << "ppp running : IFace " << X << " = " << (long)I << oendl;
 
             if( I ) {
               NC->assignInterface( I );
               return (I->IsUp) ? IsUp : Available;
             }
 
             return Available;
 
           } else {
             // pppd is down
             PPPPid = 0;
           } 
         } // else pppd is down
       }
       NC->assignInterface( 0 );
       return Unknown;
 }
 
 QString GPRSRun::setMyState( NodeCollection * NC, Action_t A , bool ) { 
 
     if( A == Up ) {
       // start ppp on deviceFile
       QStringList SL;
       SL << "pon"
          << removeSpaces( NC->name() )
          << NC->device()->deviceFile();
 
       if( ! NSResources->system().execAsUser( SL ) ) {
         return QString("Cannot start pppd for %1").arg(NC->name());
       }
     } else if ( A == Down ) {
       if( PPPPid == 0 ) {
         detectState();
       }
       if( PPPPid ) {
         QStringList SL;
 
         SL << "poff"
            << removeSpaces( NC->name() );
 
         if( ! NSResources->system().execAsUser( SL ) ) {
           return QString("Cannot terminate pppd for %1").arg(NC->name());
         }
         NC->assignInterface( 0 );
-        owarn << "ppp stopped " << oendl;
+        odebug << "ppp stopped " << oendl;
         PPPPid = 0;
       }
     }
 
     return QString();
 }
 
 bool GPRSRun::handlesInterface( const QString & S ) {
     return Pat.match( S ) >= 0;
 }
 
 bool GPRSRun::handlesInterface( InterfaceInfo * I ) {
     return handlesInterface( I->Name );
 }
diff --git a/noncore/settings/networksettings2/network/networkrun.cpp b/noncore/settings/networksettings2/network/networkrun.cpp
index c17aa7f..2c93d9d 100644
--- a/noncore/settings/networksettings2/network/networkrun.cpp
+++ b/noncore/settings/networksettings2/network/networkrun.cpp
@@ -1,51 +1,50 @@
 #include <system.h>
 #include <netnode.h>
 #include <resources.h>
 #include "networkrun.h"
 
 State_t NetworkRun::detectState( void ) { 
     InterfaceInfo * II = nodeCollection()->assignedInterface();
 
     Log(( "Interface %p : %d\n", II, (II) ? II->IsUp : 0 ));
     if( II && II->IsUp ) {
       // device has assigned interface
       return IsUp;
     }
 
     // had no interface or interface is no longer up -> release
     nodeCollection()->assignInterface( 0 );
 
     return Unknown;
 }
 
 QString NetworkRun::setMyState( NodeCollection * NC, Action_t A, bool ) { 
     // we handle UP and DOWN
     InterfaceInfo * II = NC->assignedInterface();
 
+    if( ! II ) {
+      Log(( "no interface assigned." ));
+      return QString();
+    }
+
+    QStringList SL;
+
     if( A == Up ) {
       // we can bring UP if lower level is available
-      QStringList SL;
-      SL << "ifup"
-         << QString().sprintf( "%s=%s-c%d-allowed",
+      SL << "ifup";
+    } else if( A == Down ) {
+      SL << "ifdown";
+    } else {
+      return QString();
+    }
+
+    SL << QString().sprintf( "%s=%s-c%d-allowed",
                         II->Name.latin1(), II->Name.latin1(),
                         nodeCollection()->number() );
-      if( ! NSResources->system().runAsRoot( SL ) ) {
-        return QString("Cannot call %1").arg(SL.join(" "));
-      }
-      return QString();
-    } 
-
-    if( A == Down ) {
-      QStringList SL;
-      if( II ) {
-        SL << "ifdown"
-           << II->Name.latin1();
-        if( !  NSResources->system().runAsRoot( SL ) ) {
-          return QString( "Cannot call %1" ).arg( SL.join( " " ));
-        }
-      } else {
-        Log(( "no interface assigned." ));
-      }
-    } 
+
+    if( ! NSResources->system().runAsRoot( SL ) ) {
+      return QString("Cannot call %1").arg(SL.join(" "));
+    }
+
     return QString();
 }
diff --git a/noncore/settings/networksettings2/networksettings.cpp b/noncore/settings/networksettings2/networksettings.cpp
index 9680a96..78b6cce 100644
--- a/noncore/settings/networksettings2/networksettings.cpp
+++ b/noncore/settings/networksettings2/networksettings.cpp
@@ -1,490 +1,486 @@
 #include <stdio.h>
 #include <unistd.h>
 #include <errno.h>
 
 #include <opie2/odebug.h>
 #include <opie2/oledbox.h>
 
 #include <qpe/qpeapplication.h>
 #include <qlistbox.h>
 #include <qlayout.h>
 #include <qgroupbox.h>
 #include <qtimer.h>
 #include <qlistbox.h>
 #include <qmessagebox.h>
 #include <qlabel.h>
 #include <qiconview.h>
 #include <qtimer.h>
 #include <qpe/qpeapplication.h>
 #include <qtoolbutton.h>
 #include <qevent.h>
 
 #include "networksettings.h"
 #include "netnode.h"
 #include "editconnection.h"
 
 NetworkSettings::NetworkSettings( QWidget *parent, 
                const char *name, 
                WFlags fl ) : NetworkSettingsGUI(parent,name,fl), 
                              NSD() {
 
     UpdateTimer = new QTimer( this );
 
     // set pixmaps 
     Add_TB->setPixmap( NSResources->getPixmap( "add" ) );
     Delete_TB->setPixmap( NSResources->getPixmap( "remove" ) );
     CheckState_TB->setPixmap( NSResources->getPixmap( "check" ) );
     GenConfig_TB->setPixmap( NSResources->getPixmap( "configure" ) );
 
     Disable_TB->setPixmap( NSResources->getPixmap( "disabled" ) );
     Up_TB->setPixmap( NSResources->getPixmap( "more" ) );
     Down_TB->setPixmap( NSResources->getPixmap( "less" ) );
 
     QVBoxLayout* V = new QVBoxLayout( LED_Frm );
     QHBoxLayout * H = new QHBoxLayout( 0 );
     V->addStretch(1);
     V->addLayout( H );
     Leds[0] = new Opie::Ui::OLedBox( red, LED_Frm );
     H->addWidget( Leds[0], 0, Qt::AlignVCenter );
     Leds[1] = new Opie::Ui::OLedBox( red, LED_Frm );
     H->addWidget( Leds[1], 0, Qt::AlignVCenter );
     Leds[2] = new Opie::Ui::OLedBox( red, LED_Frm );
     H->addWidget( Leds[2], 0, Qt::AlignVCenter );
     V->addStretch(1);
 
 
     SLOT_ToProfile();
 
     // populate main Listbox
     Profiles_LB->clear();
     QPEApplication::setStylusOperation( 
         Profiles_LB->viewport(), QPEApplication::RightOnHold );
 
     connect( Profiles_LB, 
              SIGNAL(rightButtonPressed(QListBoxItem*,const QPoint&)),
              this, SLOT(SLOT_EditNode(QListBoxItem*)) );
 
     { Name2Connection_t & M = NSResources->connections();
       NodeCollection * NC;
       // for all connections
       for( QDictIterator<NodeCollection> it(M);
            it.current();
            ++it ) {
         NC = it.current();
         Profiles_LB->insertItem( NC->devicePixmap(),
                                  NC->name() );
       }
     }
 
     if( Profiles_LB->count() ) {
       Profiles_LB->setSelected( 0, TRUE );
     }
 
     // if no profiles -> auto popup editing
     if( NSResources->connections().count() == 0 ) {
       QTimer::singleShot( 100, this, SLOT(SLOT_AddNode() ) );
     }
 
     connect( &(NSResources->system()), 
              SIGNAL( stdoutLine(const QString &) ),
              this, SLOT( SLOT_CmdMessage(const QString &) ) );
 
     connect( &(NSResources->system()), 
              SIGNAL( stderrLine(const QString &) ),
              this, SLOT( SLOT_CmdMessage(const QString &) ) );
 
     connect( &(NSResources->system()), 
              SIGNAL( processEvent(const QString &) ),
              this, SLOT( SLOT_CmdMessage(const QString &) ) );
 
     UpdateTimer->start( 5000 );
     connect( UpdateTimer, SIGNAL( timeout() ),
              this, SLOT( SLOT_RefreshStates() ) );
 
     /* Add QCopChannel */
     connect( qApp, SIGNAL(appMessage(const QCString&,const QByteArray&)),
              this, SLOT(SLOT_QCopMessage(const QCString&,const QByteArray&)) );
 }
 
 NetworkSettings::~NetworkSettings() {
     QString S;
 
-    owarn << "Dispose NS" << oendl;
     if( NSD.isModified() ) {
-      owarn << "Modified" << oendl;
       S = NSD.saveSettings();
       if( ! S.isEmpty() ) {
         S.insert( 0, "<p>" );
         S.append( "</p>" );
         // problem saving
         QMessageBox::warning(
               0, 
               tr( "Saving setup" ), S );
       }
 
       SLOT_GenerateConfig();
       NSD.setModified( 0 );
     }
 
 }
 
 void NetworkSettings::SLOT_CmdMessage( const QString & S ) {
     Messages_LB->insertItem( S );
     Messages_LB->setCurrentItem( Messages_LB->count()-1 );
     Messages_LB->ensureCurrentVisible();
 }
 
 void NetworkSettings::SLOT_RefreshStates( void ) {
     QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); // remember
 
     if( LBI ) {
       NodeCollection * NC;
       NSResources->system().probeInterfaces();
       // update current selection only
       NC = NSResources->findConnection( LBI->text() );
       if( NC ) {
         State_t OldS = NC->state();
         State_t NewS = NC->state(1);
         if( OldS != NewS ) {
           updateProfileState( LBI );
         }
       }
     }
 
 
     /* -> LATER !!
     bool is;
     NodeCollection * NC;
 
     for( unsigned int i = 0; i < Profiles_LB->count() ; i ++ ) {
       NC = NSResources->findConnection( Profiles_LB->text(i) );
       if( NC ) {
         State_t OldS = NC->state();
         State_t NewS = NC->state(1);
         if( OldS != NewS ) {
           is = Profiles_LB->isSelected(i);
           Profiles_LB->changeItem( NC->statePixmap(NewS), 
                                    NC->name(), 
                                    i );
           if( is ) {
             Profiles_LB->setSelected( i, TRUE );
           }
         }
       }
     }
     if( ci >= 0 )
       Profiles_LB->setCurrentItem( ci );
     */
 }
 
 void NetworkSettings::SLOT_AddNode( void ) {
     SLOT_EditNode( 0 );
 }
 
 void NetworkSettings::SLOT_DeleteNode( void ) {
     QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); 
 
     if ( ! LBI ) 
       return;
 
     if( QMessageBox::warning(
           0, 
           tr( "Removing profile" ),
           tr( "Remove selected profile ?" ), 
           1, 0 ) == 1 ) {
       NSResources->removeConnection( LBI->text() );
       delete LBI;
       NSD.setModified( 1 );
     }
 }
 
 void NetworkSettings::SLOT_EditNode( QListBoxItem * LBI ) {
     QString OldName = "";
 
     EditConnection EC( this );
 
     if( LBI ) {
       NodeCollection * NC = NSResources->findConnection( LBI->text() );
       if( ! NC ) {
         return;
       }
       OldName = NC->name();
       EC.setConnection( NC );
     }
 
     EC.showMaximized();
     // disable refresh timer 
     UpdateTimer->stop();
 
     // we need to retry
     while( 1 ) {
       if( EC.exec() == QDialog::Accepted ) {
         // toplevel item -> store
         NodeCollection * NC = EC.connection();
         if( NC->isModified() ) {
           if( LBI ) {
             if( NC->name() != OldName ) {
               // find if new name is free
               NodeCollection * LCN = NSResources->findConnection(
                     NC->name() );
               if( LCN ) {
                 QMessageBox::warning(
                   0, 
                   tr( "In System Config" ),
                   tr( "Name %1 already exists" ).arg(NC->name())
                 );
                 continue; // restart exec
               } // else new name
               // new name -> remove item
               NSResources->removeConnection( OldName );
               NSResources->addConnection( NC, 0 );
             } // else not changed
 
             // must add it here since change will trigger event
             Profiles_LB->changeItem( NC->devicePixmap(),
                                      NC->name(),
                                      Profiles_LB->index( LBI )
                                    );
           } else {
             // new item
             int ci = Profiles_LB->count();
             NSResources->addConnection( NC, 0 );
             NC->setNumber( NSResources->assignConnectionNumber() );
             Profiles_LB->insertItem( NC->devicePixmap(), NC->name() );
             Profiles_LB->setSelected( ci, TRUE );
           }
           updateProfileState( LBI );
         }
       } else {
         // cancelled : reset connection 
         if( LBI ) {
           NodeCollection * NC = NSResources->findConnection( LBI->text() );
           NC->reassign();
         }
       }
       break;
     }
     // reenable 
     UpdateTimer->start( 5000 );
 }
 
 void NetworkSettings::SLOT_ShowNode( QListBoxItem * LBI ) {
     if( LBI == 0 ) 
       return;
 
     NodeCollection * NC = NSResources->findConnection( LBI->text() );
 
     if( NC->description().isEmpty() ) {
       Description_LBL->setText( tr( "<<No description>>" ) );
     } else {
       Description_LBL->setText( NC->description() );
     }
 
     Profile_GB->setTitle( LBI->text() + " : " + NC->stateName() );
 
     bool FrmActive = 1;
     bool IsEnabled = 1;
     int leds = 0;
 
-    owarn << "State " << NC->state() << oendl;
     switch( NC->state() ) {
       case Disabled : // no further work
         IsEnabled = 0;
         FrmActive = 0;
-        owarn << "LEds " << leds << oendl;
         break;
       case Unknown :
       case Unchecked :
       case Unavailable :
         FrmActive = 0;
         break;
       case Off :
         leds = 1;
         break;
       case Available :
         leds = 2;
         break;
       case IsUp :
         leds = 3;
         break;
     }
 
     Disable_TB->setOn( ! IsEnabled );
     LED_Frm->setEnabled( FrmActive );
 
     for( int i = 0 ; i < leds; i ++ ) {
       Leds[i]->setColor( red );
       Leds[i]->setOn( true );
     }
     for( int i = leds ; i < 3; i ++ ) {
       Leds[i]->setColor( red );
       Leds[i]->setOn( false );
     }
 
     Up_TB->setEnabled( leds < 3 && leds != 0 );
     Down_TB->setEnabled( leds > 0 );
 }
 
 void NetworkSettings::SLOT_CheckState( void ) {
     QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); 
     if ( ! LBI ) 
       return;
     updateProfileState( LBI );
 }
 
 void NetworkSettings::updateProfileState( QListBoxItem * LBI ) {
     if( LBI == Profiles_LB->item( Profiles_LB->currentItem() ) ) {
       SLOT_ShowNode( LBI );
     }
 }
 
 void NetworkSettings::SLOT_GenerateConfig( void ) {
     QString S = NSD.generateSettings();
     if( ! S.isEmpty() ) {
       S.insert( 0, "<p>" );
       S.append( "</p>" );
       QMessageBox::warning(
           0, 
           tr( "Generate config" ),
           S);
     }
 }
 
 void NetworkSettings::SLOT_Disable( bool T ) {
     QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() );
     QString Msg;
 
     if ( ! LBI ) 
       return;
 
     NodeCollection * NC = NSResources->findConnection( LBI->text() );
 
-    owarn << "Prepare to disable" << oendl;
+    Log(( "Prepare to %sable\n", (T) ? "en" : "dis" ));
     Msg = NC->setState( (T) ? Disable : Enable );
     if( ! Msg.isEmpty() ) {
       Msg.insert( 0, "<p>" );
       Msg.append( "</p>" );
       QMessageBox::warning(
           0, 
           tr( "Activating profile" ),
           Msg );
       return;
     }
 
     // reload new state
     NC->state( true );
     updateProfileState( LBI );
 }
 
 void NetworkSettings::SLOT_Up( void ) {
     // bring more up
 
     QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() );
     QString Msg;
     int led = -1;
 
     if ( ! LBI ) 
       return;
 
     NodeCollection * NC = 
         NSResources->findConnection( LBI->text() );
 
     switch( NC->state() ) {
       case Disabled : // cannot modify this state
       case Unknown : // cannot modify this state
       case Unchecked : // cannot modify this state
       case Unavailable : // cannot modify this state
       case IsUp : // highest UP state
         return;
       case Off : // -> activate
         led = 1;
         Down_TB->setEnabled( true );
         Log(( "Activate interface %s\n", NC->name().latin1() ));
         Msg = NC->setState( Activate );
         break;
       case Available : // -> up
         led = 2;
         Log(( "Bring up interface %s\n", NC->name().latin1() ));
         Msg = NC->setState( Up );
         if( Msg.isEmpty() ) {
           Up_TB->setEnabled( false );
         }
         break;
     }
 
     if( ! Msg.isEmpty() ) {
       Msg.insert( 0, "<p>" );
       Msg.append( "</p>" );
       QMessageBox::warning(
           0, 
           tr( "Increase availability" ),
           Msg );
       return;
     }
 
     updateProfileState( LBI );
 
     // set color of led we should change 
     if( led > 0 ) {
       Leds[led]->setColor( blue );
       Leds[led]->setOn( true );
     }
 
 }
 
 void NetworkSettings::SLOT_Down( void ) {
     // bring more down
 
     QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() );
     int led = -1;
     QString Msg;
 
     if ( ! LBI ) 
       return;
 
     NodeCollection * NC = 
         NSResources->findConnection( LBI->text() );
 
     switch( NC->state() ) {
       case Disabled : // cannot modify this state
       case Unknown : // cannot modify this state
       case Unchecked : // cannot modify this state
       case Unavailable : // cannot modify this state
       case Off : // highest DOWN state
         break;
       case Available : // -> down
         led = 0;
         Log(( "Deactivate interface %s\n", NC->name().latin1() ));
         Msg = NC->setState( Deactivate );
         Down_TB->setEnabled( false );
         break;
       case IsUp : // highest UP state
         led = 1;
         Up_TB->setEnabled( true );
         Log(( "Bring down interface %s\n", NC->name().latin1() ));
         Msg = NC->setState( Down, 1 );
         if( Msg.isEmpty() ) {
           // remove 'up' file to make sure
           unlink ( QString().sprintf( "/tmp/Profile-%d.up", NC->number() ).latin1() );;
         }
         break;
     }
 
     if( ! Msg.isEmpty() ) {
       Msg.insert( 0, "<p>" );
       Msg.append( "</p>" );
       QMessageBox::warning(
           0, 
           tr( "Decrease availability" ),
           Msg );
       return;
     }
 
     updateProfileState( LBI );
 
     // set color of led we should change 
     if( led >= 0 ) {
       Leds[led]->setColor( blue );
     }
 }
 
diff --git a/noncore/settings/networksettings2/networksettings2/config.in b/noncore/settings/networksettings2/networksettings2/config.in
index b384e18..56e971e 100644
--- a/noncore/settings/networksettings2/networksettings2/config.in
+++ b/noncore/settings/networksettings2/networksettings2/config.in
@@ -1,5 +1,5 @@
 config NS2CORE
-  boolean "opie-networksettings2 (TCP/IP network settings)"
+  boolean "opie-networksettings2 library"
   default "y"
   depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && LIBOPIE2UI
 
diff --git a/noncore/settings/networksettings2/networksettings2/system.cpp b/noncore/settings/networksettings2/networksettings2/system.cpp
index e642c08..f027d35 100644
--- a/noncore/settings/networksettings2/networksettings2/system.cpp
+++ b/noncore/settings/networksettings2/networksettings2/system.cpp
@@ -1,587 +1,587 @@
 #include <sys/types.h>
 #include <sys/wait.h>
 
 #include <net/if.h>
 #include <net/if_arp.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>
 #include <stdlib.h>
 #include <stdio.h>
 #include <fcntl.h>
 #include <errno.h>
 #include <unistd.h>
 
 #include <opie2/oprocess.h>
 
 #include <qdir.h>
 #include <qregexp.h>
 #include <qstringlist.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qapplication.h>
 
 #include "resources.h"
 #include "system.h"
 
 #define PROCNETDEV "/proc/net/dev"
 
 #ifndef ARPHRD_IEEE80211
 #define ARPHRD_IEEE80211 801
 #endif
 
 static char Dig2Hex[] = { 
   '0', '1', '2', '3', 
   '4', '5', '6', '7', 
   '8', '9', 'A', 'B', 
   'C', 'D', 'E', 'F'
 };
 
 // get HIGH nibble of byte
 #define HN(x)           Dig2Hex[(((x)&0xf0)>>4)]
 // get LOW nibble of byte
 #define LN(x)           Dig2Hex[((x)&0x0f)]
 
 System::System( void ) : QObject(), ProbedInterfaces() {
     ProcDevNet = 0;
 }
 
 System::~System( void ) {
     if( ProcDevNet )
       delete ProcDevNet;
 }
 
 QDict<InterfaceInfo> & System::interfaces( void ) {
     if( ProbedInterfaces.count() == 0 ) {
       probeInterfaces();
     }
     return ProbedInterfaces;
 }
 
 int System::runAsRoot( QStringList & S, MyProcess * Prc ) {
     char * usr = getenv("USER");
 
     if( S.count() == 0 ) {
       // loophole to start shell
       return 8888;
     }
     if( usr == 0 || strcmp( usr, "root" ) ) {
       // unknown or non-root user -> use SUDO
       S.prepend( "sudo" );
     }
 
     if( getenv( "NS2TESTMODE" ) ) {
-      owarn << "TESTMODE !!! execute " 
+      odebug << "TESTMODE !!! execute " 
             << S.join( " ") 
             << oendl;
     } else {
       MyProcess * P;
 
       if( Prc ) {
         P = Prc;
       } else {
         P = new MyProcess();
         emit processEvent( tr("Command : ") + S.join( " " ) );
 
         connect( P, 
                  SIGNAL( stdoutLine( const QString & ) ),
                  this, 
                  SIGNAL( stdoutLine( const QString & ) ) );
 
         connect( P, 
                  SIGNAL( stderrLine( const QString & ) ),
                  this, 
                  SIGNAL( stderrLine( const QString & ) ) );
 
         connect( P, 
                  SIGNAL(processExited(MyProcess*) ),
                  this, SLOT
                  (SLOT_ProcessExited(MyProcess*) ) );
       }
 
       P->process() << S;
 
       Log(("Executing %s\n", S.join( " " ).latin1() ));
 
       if( ! P->process().start( OProcess::DontCare, 
                       OProcess::AllOutput ) ) {
-        owarn << "Error starting " << S << oendl;
+        odebug << "Error starting " << S << oendl;
         if( ! Prc )
           delete P;
         // error starting app
         return 0;
       }
-      owarn << "Started " << S << oendl;
+      odebug << "Started " << S << oendl;
     }
 
     // all is fine
     return 1;
 }
 
 int System::execAsUser( QStringList & SL ) {
       MyProcess * P = new MyProcess();
       CurrentQPEUser CU = NSResources->currentUser();
       char * usr = getenv("USER");
 
       if( strcmp( usr, "root" ) == 0 ) {
         // find user running qpe
         if( CU.UserName.isEmpty() ) {
           // if we come here, the exec was not successfull
           Log(("User not known \n" ));
           return 0;
         }
       }
 
       // now we are ready to exec the requested command
       setuid( CU.Uid );
       setgid( CU.Gid );
 
       for( unsigned int i = 0 ; i < CU.EnvList.count() ; i ++ ) {
         QString X;
         QStringList SL;
         X = CU.EnvList[i];
         SL = QStringList::split( "=", X );
         P->process().setEnvironment( SL[0], SL[1] );
       }
 
       P->process() << SL;
 
       emit processEvent( tr("Command : ") + SL.join( " " ) );
 
       Log(("Executing as user %s : %s\n", 
             CU.UserName.latin1(),
             SL.join( " " ).latin1() ));
 
       int rv = ( P->process().start( OProcess::DontCare, 
                       OProcess::NoCommunication ) );
       delete P;
 
       if( rv ) {
         // if we come here, the exec was not successfull
         Log(("Could not exec : %d\n", errno ));
       }
 
       return ! rv;
 }
 
 void System::SLOT_ProcessExited( MyProcess * P ) {
       QString R;
 
       for( QValueListConstIterator<QCString> it = P->process().args().begin();
            it != P->process().args().end(); 
            ++it ) {
         R += (*it); 
         R += " ";
       }
 
       R += "Returned with " + QString().setNum( P->process().exitStatus() );
       emit processEvent( R );
       delete P;
 }
 
 void System::refreshStatistics( InterfaceInfo & I ) {
     if( ! ProcDevNet ) {
       return;
     }
     // cannot seek on dev
     ProcDevNet->close();
     ProcDevNet->open( IO_ReadOnly );
 
     QString line;
     QTextStream procTs(ProcDevNet);
     QStringList SL;
     int loc = -1;
     int version;
 
     procTs.readLine();
     line = procTs.readLine();
     // get version
     if( line.find("compressed") )
       version = 3;
     else if( line.find( "bytes" ) )
       version = 2;
     else 
       version = 1;
     while((line = procTs.readLine().simplifyWhiteSpace()) != QString::null) {
       if( (loc = line.find(":") ) == -1) {
         continue;
       }
 
       if( I.Name != line.left(loc) ) 
         continue;
 
       // tokenize
       SL = QStringList::split( ' ', line, FALSE );
 
       // update data
       switch( version ) {
         case 1 :
           I.RcvBytes = SL[1];
           I.RcvErrors = SL[3];
           I.RcvDropped = SL[4];
           I.SndBytes = SL[6];
           I.SndErrors = SL[8];
           I.SndDropped = SL[9];
           I.Collisions = SL[11];
           break;
         case 2 :
           I.RcvBytes = SL[1];
           I.RcvErrors = SL[3];
           I.RcvDropped = SL[4];
           I.SndBytes = SL[7];
           I.SndErrors = SL[9];
           I.SndDropped = SL[10];
           I.Collisions = SL[12];
           break;
         case 3 :
           I.RcvBytes = SL[1];
           I.RcvErrors = SL[3];
           I.RcvDropped = SL[4];
           I.SndBytes = SL[9];
           I.SndErrors = SL[11];
           I.SndDropped = SL[12];
           I.Collisions = SL[14];
           break;
       }
       break;
     }
 }
 
 //
 // THIS UPDATES THE LIST -> INTERFACES ARE NOT DELETED BUT
 // FLAGGED AS ! 'IsUp' IF NO LONGER PRESENT
 //
 
 void System::probeInterfaces( void ) {
 
     // probe interfaces
     int sockfd;
     // get list of all interfaces
     struct ifreq ifrs;
     InterfaceInfo * IFI;
 
     // flag all as 'down'
     for( QDictIterator<InterfaceInfo> it( ProbedInterfaces ); 
          it.current();
          ++it ) {
       it.current()->IsUp = 0;
     }
 
     sockfd = socket(PF_INET, SOCK_DGRAM, 0);
     if(sockfd == -1) {
-      owarn << "Cannot open INET socket "
+      odebug << "Cannot open INET socket "
             << errno 
             << " "
             << strerror( errno )
             << oendl;
       return;
     }
 
     // read interfaces from /proc/dev/net
     // SIOCGIFCONF does not return ALL interfaces ???!?
     ProcDevNet = new QFile(PROCNETDEV);
     if( ! ProcDevNet->open(IO_ReadOnly) ) {
-      owarn << "Cannot open " 
+      odebug << "Cannot open " 
             << PROCNETDEV
             << " "
             << errno 
             << " "
             << strerror( errno )
             << oendl;
       delete ProcDevNet;
       ProcDevNet =0;
       ::close( sockfd );
       return;
     }
 
     QString line;
     QString NicName;
     QTextStream procTs(ProcDevNet);
     int loc = -1;
 
     procTs.readLine(); // eat a line
     procTs.readLine(); // eat a line
     while((line = procTs.readLine().simplifyWhiteSpace()) != QString::null) {
       if((loc = line.find(":")) == -1) {
         continue;
       }
 
       NicName = line.left(loc);
 
       // set name for ioctl
       strcpy( ifrs.ifr_name, NicName.latin1() );
 
       if ( ! ( IFI = ProbedInterfaces.find( NicName ) ) ) {
         // new nic
         Log(("New NIC found : %s\n", NicName.latin1()));
         IFI = new InterfaceInfo;
         IFI->Name = line.left(loc);
         IFI->Collection = 0;
         ProbedInterfaces.insert( IFI->Name, IFI );
 
         // get dynamic info
         if( ioctl(sockfd, SIOCGIFFLAGS, &ifrs) >= 0 ) {
           IFI->IsPointToPoint = ((ifrs.ifr_flags & IFF_POINTOPOINT) == IFF_POINTOPOINT);
         } else {
           IFI->IsPointToPoint = 0;
         }
 
         // settings that never change
         IFI->DstAddress = "";
 
         if( IFI->IsPointToPoint ) {
           if( ioctl(sockfd, SIOCGIFDSTADDR, &ifrs) >= 0 ) {
             IFI->DstAddress = 
              inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_dstaddr)->sin_addr);
           }
         }
 
         IFI->CardType = 999999;
         IFI->MACAddress = "";
 
         if( ioctl(sockfd, SIOCGIFHWADDR, &ifrs) >= 0 ) {
           Log(("Family for NIC %s : %d\n", IFI->Name.latin1(), 
               ifrs.ifr_hwaddr.sa_family ));
 
           IFI->CardType = ifrs.ifr_hwaddr.sa_family;
           switch( ifrs.ifr_hwaddr.sa_family ) {
             case ARPHRD_ETHER : // regular MAC address
               // valid address -> convert to regular ::: format
               // length = 6 bytes = 12 DIGITS -> 6 :
               IFI->MACAddress.sprintf(
                 "%c%c:%c%c:%c%c:%c%c:%c%c:%c%c",
                 HN( ifrs.ifr_hwaddr.sa_data[0] ),
                 LN( ifrs.ifr_hwaddr.sa_data[0] ),
                 HN( ifrs.ifr_hwaddr.sa_data[1] ),
                 LN( ifrs.ifr_hwaddr.sa_data[1] ),
                 HN( ifrs.ifr_hwaddr.sa_data[2] ),
                 LN( ifrs.ifr_hwaddr.sa_data[2] ),
                 HN( ifrs.ifr_hwaddr.sa_data[3] ),
                 LN( ifrs.ifr_hwaddr.sa_data[3] ),
                 HN( ifrs.ifr_hwaddr.sa_data[4] ),
                 LN( ifrs.ifr_hwaddr.sa_data[4] ),
                 HN( ifrs.ifr_hwaddr.sa_data[5] ),
                 LN( ifrs.ifr_hwaddr.sa_data[5] )
               );
               break;
 #ifdef ARPHRD_IEEE1394
             case ARPHRD_IEEE1394 : // Firewire Eth address
               IFI->MACAddress.sprintf(
                 "%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-00-00",
                 HN( ifrs.ifr_hwaddr.sa_data[0] ),
                 LN( ifrs.ifr_hwaddr.sa_data[0] ),
                 HN( ifrs.ifr_hwaddr.sa_data[1] ),
                 LN( ifrs.ifr_hwaddr.sa_data[1] ),
                 HN( ifrs.ifr_hwaddr.sa_data[2] ),
                 LN( ifrs.ifr_hwaddr.sa_data[2] ),
                 HN( ifrs.ifr_hwaddr.sa_data[3] ),
                 LN( ifrs.ifr_hwaddr.sa_data[3] ),
                 HN( ifrs.ifr_hwaddr.sa_data[4] ),
                 LN( ifrs.ifr_hwaddr.sa_data[4] ),
                 HN( ifrs.ifr_hwaddr.sa_data[5] ),
                 LN( ifrs.ifr_hwaddr.sa_data[5] ),
                 HN( ifrs.ifr_hwaddr.sa_data[6] ),
                 LN( ifrs.ifr_hwaddr.sa_data[6] ),
                 HN( ifrs.ifr_hwaddr.sa_data[7] ),
                 LN( ifrs.ifr_hwaddr.sa_data[7] ),
                 HN( ifrs.ifr_hwaddr.sa_data[8] ),
                 LN( ifrs.ifr_hwaddr.sa_data[8] ),
                 HN( ifrs.ifr_hwaddr.sa_data[9] ),
                 LN( ifrs.ifr_hwaddr.sa_data[9] ),
                 HN( ifrs.ifr_hwaddr.sa_data[10] ),
                 LN( ifrs.ifr_hwaddr.sa_data[10] ),
                 HN( ifrs.ifr_hwaddr.sa_data[11] ),
                 LN( ifrs.ifr_hwaddr.sa_data[11] ),
                 HN( ifrs.ifr_hwaddr.sa_data[12] ),
                 LN( ifrs.ifr_hwaddr.sa_data[12] ),
                 HN( ifrs.ifr_hwaddr.sa_data[13] ),
                 LN( ifrs.ifr_hwaddr.sa_data[13] )
               );
               break;
 #endif
             case ARPHRD_PPP : // PPP
               break;
             case ARPHRD_IEEE80211 : // WLAN
               break;
             case ARPHRD_IRDA : // IRDA
               break;
           }
         }
       } else // else already probed before -> just update
         Log(("Redetected NIC %s\n", NicName.latin1()));
 
       // get dynamic info
       if( ioctl(sockfd, SIOCGIFFLAGS, &ifrs) >= 0 ) {
         IFI->IsUp = ((ifrs.ifr_flags & IFF_UP) == IFF_UP);
         IFI->HasMulticast = ((ifrs.ifr_flags & IFF_MULTICAST) == IFF_MULTICAST);
       } else {
         IFI->IsUp = 0;
         IFI->HasMulticast = 0;
       }
 
       if( ioctl(sockfd, SIOCGIFADDR, &ifrs) >= 0 ) {
         IFI->Address = 
            inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_addr)->sin_addr);
       } else {
         IFI->Address = "";
         IFI->IsUp = 0;
       }
       if( ioctl(sockfd, SIOCGIFBRDADDR, &ifrs) >= 0 ) {
         IFI->BCastAddress = 
            inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_broadaddr)->sin_addr);
       } else {
         IFI->BCastAddress = "";
       }
       if( ioctl(sockfd, SIOCGIFNETMASK, &ifrs) >= 0 ) {
         IFI->Netmask = 
            inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_netmask)->sin_addr);
       } else {
         IFI->Netmask = "";
       }
       Log(("NIC %s UP ? %d\n", NicName.latin1(), IFI->IsUp ));
     }
 
     ::close( sockfd );
 }
 
 InterfaceInfo * System::findInterface( const QString & N ) {
       InterfaceInfo * Run;
       // has PAN connection UP interface ?
       for( QDictIterator<InterfaceInfo> It(ProbedInterfaces);
            It.current();
            ++It ) {
         Run = It.current();
         if( N == Run->Name ) {
           // this PAN connection is up
           return Run;
         }
       }
       return 0;
 }
 
 #include <stdarg.h>
 static FILE * logf = 0;
 
 void VLog( char * Format, ... ) {
       va_list l;
 
       va_start(l, Format );
 
       if( logf == (FILE *)0 ) {
         QString S = getenv("NS2LOG");
         if( S == "stderr" ) {
           logf = stderr;
         } else if( S.isEmpty() ) {
           logf = fopen( "/tmp/ns2log", "a" );
         } else {
           logf = fopen( S, "a" );
         }
 
         if( ! logf ) {
           fprintf( stderr, "Cannot open logfile %s : %d\n", 
               S.latin1(), errno );
           logf = (FILE *)1;
         } else {
           fprintf( logf, "____ OPEN LOGFILE ____\n");
         }
       }
 
       if( (unsigned long)logf > 1 ) {
         vfprintf( logf, Format, l );
       }
       va_end( l );
       fflush( logf );
 
 }
 
 void LogClose( void ) {
       if( (long)logf > 1 ) {
         fprintf( logf, "____ CLOSE LOGFILE ____\n");
         if( logf != stderr ) {
           fclose( logf );
         }
         logf = 0;
       }
 }
 
 QString removeSpaces( const QString & X ) {
       QString Y;
       Y = X.simplifyWhiteSpace(); 
       Y.replace( QRegExp(" "), "_" );
-      owarn << X <<  " **" << Y << "**" << oendl;
+      odebug << X <<  " **" << Y << "**" << oendl;
       return Y;
 }
 
 //
 //
 //
 //
 //
 
 MyProcess::MyProcess() : QObject(), StdoutBuffer(), StderrBuffer() {
       P = new OProcess();
       connect( P, 
                SIGNAL( receivedStdout(Opie::Core::OProcess*, char*, int ) ),
                this, 
                SLOT( SLOT_Stdout(Opie::Core::OProcess*,char*,int) ) );
 
       connect( P, 
                SIGNAL( receivedStderr(Opie::Core::OProcess*, char*, int ) ),
                this, 
                SLOT( SLOT_Stderr(Opie::Core::OProcess*,char*,int) ) );
       connect( P, 
                SIGNAL( processExited(Opie::Core::OProcess*) ),
                this,
                SLOT( SLOT_ProcessExited(Opie::Core::OProcess*) ) );
 }
 
 MyProcess::~MyProcess() {
       delete P;
 }
 
 void MyProcess::SLOT_Stdout( Opie::Core::OProcess * , char * Buf, int len ) {
       char * LB = (char *)alloca( len + 1 );
       memcpy( LB, Buf, len );
       LB[len] = '\0';
 
       // now input is zero terminated
       StdoutBuffer += LB;
 
-      owarn << "Received " << len << " bytes on stdout" << oendl;
+      odebug << "Received " << len << " bytes on stdout" << oendl;
       // see if we have some lines (allow empty lines)
       QStringList SL = QStringList::split( "\n", StdoutBuffer, TRUE );
 
       for( unsigned int i = 0; i < SL.count()-1; i ++ ) {
         Log(( "Stdout : \"%s\"\n", SL[i].latin1() ) );
         emit stdoutLine( SL[i] );
       }
 
       // last line is rest
       StdoutBuffer = SL[ SL.count()-1 ];
 }
 
 void MyProcess::SLOT_Stderr( Opie::Core::OProcess * , char * Buf, int len ) {
       char * LB = (char *)alloca( len + 1 );
       memcpy( LB, Buf, len );
       LB[len] = '\0';
 
       // now input is zero terminated
       StderrBuffer += LB;
 
-      owarn << "Received " << len << " bytes on stderr" << oendl;
+      odebug << "Received " << len << " bytes on stderr" << oendl;
       // see if we have some lines (allow empty lines)
       QStringList SL = QStringList::split( "\n", StderrBuffer, TRUE );
 
       for( unsigned int i = 0; i < SL.count()-1; i ++ ) {
         Log(( "Stderr : \"%s\"\n", SL[i].latin1() ) );
         emit stderrLine( SL[i] );
       }
 
       // last line is rest
       StderrBuffer = SL[ SL.count()-1 ];
 }
 
 void MyProcess::SLOT_ProcessExited( Opie::Core::OProcess * ) {
       emit processExited( this );
 }
diff --git a/noncore/settings/networksettings2/networksettings2/systemfile.cpp b/noncore/settings/networksettings2/networksettings2/systemfile.cpp
index 8deef94..1b1988e 100644
--- a/noncore/settings/networksettings2/networksettings2/systemfile.cpp
+++ b/noncore/settings/networksettings2/networksettings2/systemfile.cpp
@@ -1,235 +1,235 @@
 #include <stdio.h>
 #include <qpe/qpeapplication.h>
 #include <qfileinfo.h>
 #include <qmessagebox.h>
 #include <qfile.h>
 #include <qtextstream.h>
 
 #include "resources.h"
 #include "systemfile.h"
 
 #define TEMPLATEDIR "NS2templates/"
 QString TemplDir;
 
 SystemFile::SystemFile( const QString & N, 
                         const QString & P,
                         bool KDI ){
       Name = N;
       Path = P;
       InAppend = 0;
       F = 0;
       // get template info
       { QString S;
         QFileInfo FI;
 
         // find location of templates
         TemplDir = QPEApplication::qpeDir() + "etc/" + TEMPLATEDIR;
         FI.setFile( TemplDir );
         if( ! FI.isDir() ) {
           // try current dir
           TemplDir = "./" TEMPLATEDIR;
           FI.setFile( TemplDir );
           if( ! FI.isDir() ) {
             hasPreSection = 
               hasPostSection = 
               hasPreNodeSection = 
               hasPostNodeSection = 
               hasPreDeviceSection = 
               hasPostDeviceSection = 0;
             return;
           }
         }
 
         // have found location
         S = TemplDir + Name + "/presection";
         FI.setFile( S );
         hasPreSection = ( FI.exists() && FI.isReadable() );
         S = TemplDir + Name + "/postsection";
         FI.setFile( S );
         hasPostSection = ( FI.exists() && FI.isReadable() );
         S = TemplDir + Name + "/prenodesection";
         FI.setFile( S );
         hasPreNodeSection = ( FI.exists() && FI.isReadable() );
         S = TemplDir + Name + "/postnodesection";
         FI.setFile( S );
         hasPostNodeSection = ( FI.exists() && FI.isReadable() );
         S = TemplDir + Name + "/predevicesection";
         FI.setFile( S );
         hasPreDeviceSection = ( FI.exists() && FI.isReadable() );
         S = TemplDir + Name + "/postdevicesection";
         FI.setFile( S );
         hasPostDeviceSection = ( FI.exists() && FI.isReadable() );
       }
 
       KnowsDeviceInstances = KDI;
 }
 
 SystemFile::SystemFile( const QString & N, bool KDI ){
       Name = N;
       Path = "";
       InAppend = 0;
       F =0;
       KnowsDeviceInstances = KDI;
       hasPreSection = 
         hasPostSection = 
         hasPreNodeSection = 
         hasPostNodeSection = 
         hasPreDeviceSection = 
         hasPostDeviceSection = 0;
 }
 
 SystemFile::~SystemFile( void ) {
       close();
 }
 
 bool SystemFile::open( void ) {
       QString Prefix = getenv( "NS2OUTPUTTO" );
 
       if( Prefix != "stderr" /* && Name != "interfaces" */ ) {
         // generate files where the need to be
         if( F ) {
           F->close();
           delete F;
         }
 
         F = new QFile( Prefix + Path + ((InAppend)?"":"bup") );
         Log(( "Open systemfile %s\n", F->name().latin1() ));
         if( ! F->open( ((InAppend)?IO_Append : 0 ) | IO_WriteOnly ) ) {
           return 0;
         }
       } else {
         if( ! F ) {
-          owarn << "!!!!!!!!!!!!!!!!!! " << oendl;
-          owarn << "!!!! TESTMODE !!!!" << oendl;
-          owarn << "!!!!!!!!!!!!!!!!!! " << oendl;
-          owarn << "!!!!" << oendl;
-          owarn << "!!!! GENERATE " << Path << oendl;
+          odebug << "!!!!!!!!!!!!!!!!!! " << oendl;
+          odebug << "!!!! TESTMODE !!!!" << oendl;
+          odebug << "!!!!!!!!!!!!!!!!!! " << oendl;
+          odebug << "!!!!" << oendl;
+          odebug << "!!!! GENERATE " << Path << oendl;
           if( InAppend ) {
-            owarn << "!!!! In APPEND mode" << oendl;
+            odebug << "!!!! In APPEND mode" << oendl;
           }
-          owarn << "!!!!" << oendl;
-          owarn << "!!!!!!!!!!!!!!!!!!" << oendl;
+          odebug << "!!!!" << oendl;
+          odebug << "!!!!!!!!!!!!!!!!!!" << oendl;
 
           F = new QFile();
           F->open( IO_WriteOnly, stderr );
         }
       }
       setDevice( F );
       return 1;
 }
 
 bool SystemFile::close( void ) {
       if( ! F || ! F->isOpen() ) {
         return 1 ;
       }
 
       QString Prefix = getenv( "NS2OUTPUTTO" );
 
       if( Prefix == "stderr" ) {
         return 1;
       }
 
       QString OldP = Prefix + Path + "bup";
 
       F->close();
       delete F;
       F = 0;
 
       if( ! InAppend ) {
-        owarn << "Rename " << OldP << " to " << Path << oendl;
+        odebug << "Rename " << OldP << " to " << Path << oendl;
         return ( rename( OldP.latin1(), Path.latin1() ) >= 0 );
       } 
       return 1;
 }
 
 bool SystemFile::preSection( void ) {
       if( hasPreSection ) {
         QFile Fl( TemplDir + Name + "/presection" );
         if( ! Fl.open( IO_ReadOnly ) )
           return 0; // error
         // copy file to this file
         F->writeBlock( Fl.readAll() );
       }
       return 1;
 }
 
 bool SystemFile::postSection( void ) {
       if( hasPostSection ) {
         QFile Fl( TemplDir + Name + "/postsection" );
         if( ! Fl.open( IO_ReadOnly ) )
           return 0; // error
         // copy file to this file
         F->writeBlock( Fl.readAll() );
       }
       return 1;
 }
 
 bool SystemFile::preNodeSection( ANetNodeInstance * NNI, long ) {
       if( hasPreNodeSection ) {
         QFile Fl( TemplDir + Name + "/prenodesection" );
         if( ! Fl.open( IO_ReadOnly ) )
           return 0; // error
         QTextStream TX( &Fl );
         QString Out;
         QString S = TX.readLine();
         while( ! TX.eof() ) {
           Out = S.
               arg(NNI->nodeClass()->name());
           (*this) << Out << endl;
           S = TX.readLine();
         }
       }
       return 1;
 }
 
 bool SystemFile::postNodeSection( ANetNodeInstance * NNI, long ) {
       if( hasPostNodeSection ) {
         QFile Fl( TemplDir + Name + "/postnodesection" );
         if( ! Fl.open( IO_ReadOnly ) )
           return 0; // error
         QTextStream TX( &Fl );
         QString Out;
         QString S = TX.readLine();
         while( ! TX.eof() ) {
           Out = S.
               arg(NNI->name());
           (*this) << Out << endl;
           S = TX.readLine();
         }
       }
       return 1;
 }
 
 bool SystemFile::preDeviceSection( ANetNode * NN ) {
       if( hasPreDeviceSection ) {
         QFile Fl( TemplDir + Name + "/predevicesection" );
         if( ! Fl.open( IO_ReadOnly ) )
           return 0; // error
         QTextStream TX( &Fl );
         QString Out;
         QString S = TX.readLine();
         while( ! TX.eof() ) {
           Out = S.arg(NN->name());
           (*this) << Out << endl;
           S = TX.readLine();
         }
       }
       return 1;
 }
 
 bool SystemFile::postDeviceSection( ANetNode * NN ) {
       if( hasPostDeviceSection ) {
         QFile Fl( TemplDir + Name + "/postdevicesection" );
         if( ! Fl.open( IO_ReadOnly ) )
           return 0; // error
         QTextStream TX( &Fl );
         QString Out;
         QString S = TX.readLine();
         while( ! TX.eof() ) {
           Out = S.arg(NN->name());
           (*this) << Out << endl;
           S = TX.readLine();
         }
       }
       return 1;
 }
diff --git a/noncore/settings/networksettings2/opie-networksettings2.postinst b/noncore/settings/networksettings2/opie-networksettings2.postinst
index ce43274..d1d98ac 100755
--- a/noncore/settings/networksettings2/opie-networksettings2.postinst
+++ b/noncore/settings/networksettings2/opie-networksettings2.postinst
@@ -1,9 +1,9 @@
 #!/bin/sh
 
 QTPB=/opt/QtPalmtop/bin
 
 [ ! -L ${QTPB}/networksettings2-request ] && ln -sf ${QTPB}/networksettings2 ${QTPB}/networksettings2-request
 
-qcop QPE/TaskBar "reloadApps()"
+${QTPB}/qcop QPE/TaskBar "reloadApps()"
 
 exit 0
diff --git a/noncore/settings/networksettings2/opietooth2/OTDevice.cpp b/noncore/settings/networksettings2/opietooth2/OTDevice.cpp
index 62f17a0..c6f7d5e 100644
--- a/noncore/settings/networksettings2/opietooth2/OTDevice.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTDevice.cpp
@@ -1,256 +1,256 @@
 #include <qdir.h>
 #include <qfileinfo.h>
 
 #include <bluezlib.h>
 
 /* OPIE */
 #include <opie2/odevice.h>
 #include <opie2/oprocess.h>
 #include <opie2/odebug.h>
 
 #include <OTDevice.h>
 
 using namespace Opie::Core;
 using namespace Opietooth2;
 using Opie::Core::OProcess;
 
 OTDevice::OTDevice( OTGateway * _OT ) : QObject(0, "device") {
       
       // initialize 
       OT = _OT;
 
       // detect bluetooth type
       QString a, b; // fake
       unsigned long c; // fake
       detectDeviceType( a, b, c );
 
       if( needsAttach() ) {
         // requires HCIATTACH
         // pid of hciattach
         m_hciattachPid = getPidOfHCIAttach();
 
         m_hciattach = 0;
 
         if( m_hciattachPid == 0 ) {
           // no pid -> not attached
           m_deviceNr = -1;
         } else {
           // system enabled
           // currently no way to figure out which attach produce which
           // hci
           m_deviceNr = 0;
         }
       } else {
         m_deviceNr = 0;
       }
 }
 
 OTDevice::~OTDevice(){
       if( needsAttach() && m_hciattach ) {
         // does not auto stop bluetooth
         m_hciattach->detach();
         delete m_hciattach;
       }
 }
 
 bool OTDevice::attach(){
 
       if( needsAttach() && m_hciattachPid == 0 ) {
         QString Dev, Mode;
         unsigned long Spd;
 
         detectDeviceType( Dev, Mode, Spd );
 
         // not yet started
         m_hciattach = new OProcess();
         *m_hciattach << "hciattach";
         *m_hciattach << "-p"; // so that it prints its pid
         *m_hciattach << Dev 
                      << Mode 
                      << QString().setNum(Spd);
 
         connect( m_hciattach, 
                  SIGNAL(receivedStdout(Opie::Core::OProcess*, char*, int ) ),
                  this, SLOT
                  (slotStdOut(Opie::Core::OProcess*,char*,int) ) );
 
         connect( m_hciattach, 
                  SIGNAL(receivedStderr(Opie::Core::OProcess*, char*, int ) ),
                  this, SLOT
                  (slotStdErr(Opie::Core::OProcess*,char*,int) ) );
 
         // we need to start this in 'dontcare' mode because
         // if qpe exists we want the hci to keep running
         if( ! m_hciattach->start( OProcess::DontCare, 
                                   OProcess::AllOutput
                                 ) ){
           emit error( tr( "Could not start hciattach" ) );
           delete m_hciattach;
           m_hciattach = 0;
           return FALSE;
         }
       }
 
       return TRUE;
 }
 
 bool OTDevice::detach(){
 
       if( needsAttach() && m_hciattachPid ) {
         if( m_hciattach ) {
           delete m_hciattach;
           m_hciattach = 0;
         }
 
         if( kill( m_hciattachPid, 9) < 0 ) {
-          owarn << "could not stop " << errno << oendl;
+          odebug << "could not stop " << errno << oendl;
           emit error( tr( "Could not stop process" ) );
           return FALSE;
         }
         m_hciattachPid = 0;
         emit isEnabled( m_deviceNr, 0 );
         m_deviceNr = -1;
       }
 
       return TRUE;
 }
 
 bool OTDevice::isAttached()const{
       return ! needsAttach() || m_hciattachPid != 0;
 }
 
 bool OTDevice::checkAttach(){
       if( ! needsAttach() ) {
         m_deviceNr = 0;
         emit isEnabled( 0, 1 );
         return TRUE;
       }
 
       if( m_hciattachPid ) {
         QString S;
         S.setNum( m_hciattachPid );
         QDir D( "/proc" );
         if( !D.exists( S ) ) {
           // down
           m_hciattachPid = 0;
           emit isEnabled( m_deviceNr, 0 );
           m_deviceNr = -1;
         }
       } else {
         // check
         m_hciattachPid = getPidOfHCIAttach();
         if ( m_hciattachPid ) {
           m_deviceNr = 0;
           emit isEnabled( m_deviceNr, 1 );
         }
       }
       return m_hciattachPid != 0;
 }
 
 void OTDevice::slotStdOut(OProcess* proc, char* , int ) {
       if( proc == m_hciattach ) {
         m_hciattach->detach();
 
         // system enabled
         // currently no way to figure out which attach produce which
         // hci
         if( m_deviceNr == -1 ) {
           m_deviceNr = 0;
           emit isEnabled( m_deviceNr, 1 );
         }
       } 
 }
 
 void OTDevice::slotStdErr(OProcess* proc, char* chars, int len) {
 
       if(proc == m_hciattach && len >= 1 ){
         // collect output
         QCString string( chars, len+1 ); // \0 == +1
         QString m_output;
         m_output.append( string.data() );
-        owarn << m_output << oendl;
+        odebug << m_output << oendl;
       }
 }
 
 pid_t OTDevice::getPidOfHCIAttach( void ) {
 
       if( needsAttach() ) {
         // not yet attached -> perhaps now ?
         // load /proc dir and check if command name contains hciattach
         QRegExp R("[0-9]+");
         QDir ProcDir( "/proc" );
         QFileInfo FI;
         QStringList EL = ProcDir.entryList( QDir::Dirs );
 
         // print it out
         for ( QStringList::Iterator it = EL.begin(); 
               it != EL.end(); 
               ++it ) {
           if( R.match( (*it) ) >= 0 ) {
             // is pid
 
             // get command being executed
             FI.setFile( ProcDir.path()+"/"+ (*it) + "/exe" );
 
             // get the link
             if( FI.readLink().right( 9 ) == "hciattach" ) {
               // this is hci attach process
 
               return (*it).toULong();
               break;
             }
           }
         }
       }
 
       return 0;
 }
 
 void OTDevice::detectDeviceType( QString & Device,
                                  QString & Mode,
                                  unsigned long & Speed ) {
 
      // detect device type and determine parms
-     owarn << "Detecting device" << oendl;
+     odebug << "Detecting device" << oendl;
      switch ( ODevice::inst()->model() ) {
       case Model_iPAQ_H39xx:
           Device = "/dev/tts/1";
           Mode = "bcsp";
           Speed = 921600;
           NeedsAttach = 1;
           break;
 
       case Model_iPAQ_H5xxx:
           Device = "/dev/tts/1";
           Mode = "any";
           Speed = 921600;
           NeedsAttach = 1;
           break;
 
       case Model_GenuineIntel :
           Device = "";
           Mode = "";
           Speed = 0;
           NeedsAttach = 0;
           break;
 
       default:
           Device = "/dev/ttySB0";
           Mode = "bcsp";
           Speed = 230400;
           NeedsAttach = 1;
           break;
       }
 }
 
 QString OTDevice::getRFCommDevicePattern( void ) {
 
       QDir D( "/dev/bluetooth/rfcomm" );
       if( D.exists() ) {
         // devfs
         return QString( "/dev/bluetooth/rfcomm/%1" );
       }
 
       // regular 'dev' directory
       return QString( "/dev/rfcomm%1" );
 }
diff --git a/noncore/settings/networksettings2/opietooth2/OTDriver.cpp b/noncore/settings/networksettings2/opietooth2/OTDriver.cpp
index 8bd7919..a7ee662 100644
--- a/noncore/settings/networksettings2/opietooth2/OTDriver.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTDriver.cpp
@@ -25,720 +25,720 @@ static struct {
     unsigned short rev;
 } csr_map[] = {
     { "HCI 11.2 (bc01b)",   114 },
     { "HCI 11.3 (bc01b)",   115 },
     { "HCI 12.1 (bc01b)",   119 },
     { "HCI 12.3 (bc01b)",   134 },
     { "HCI 12.7 (bc01b)",   188 },
     { "HCI 12.8 (bc01b)",   218 },
     { "HCI 12.9 (bc01b)",   283 },
     { "HCI 13.10 (bc01b)",  309 },
     { "HCI 13.11 (bc01b)",  351 },
     { "HCI 16.4 (bc01b)",   523 },
     { "HCI 14.3 (bc02x)",   272 },
     { "HCI 14.6 (bc02x)",   336 },
     { "HCI 14.7 (bc02x)",   373 },
     { "HCI 14.8 (bc02x)",   487 },
     { "HCI 15.3 (bc02x)",   443 },
     { "HCI 16.4 (bc02x)",   525 },
     { NULL, 0}
 };
 
 static char *services[] = { "Positioning",
                             "Networking",
                             "Rendering",
                             "Capturing",
                             "Object Transfer",
                             "Audio",
                             "Telephony",
                             "Information" };
 
 static char *major_devices[] = { "Miscellaneous",
                                  "Computer",
                                  "Phone",
                                  "LAN Access",
                                  "Audio/Video",
                                  "Peripheral",
                                  "Imaging",
                                  "Uncategorized" };
 
 
 typedef struct {
     short Minor;
     const char * Description;
 } ClassMap_t;
 
 static ClassMap_t MapMiscClass[] = {
     { -1, "" }
 };
 
 static ClassMap_t MapUnclassifiedClass[] = {
     { -1, "" }
 };
 
 static ClassMap_t MapComputerClass[] = {
     { 0, "Uncategorized" } ,
     { 1, "Desktop workstation" } ,
     { 2, "Server" } ,
     { 3, "Laptop" } ,
     { 4, "Handheld" } ,
     { 5, "Palm" } ,
     { 6, "Wearable" },
     { -1, 0 }
 };
 
 static ClassMap_t MapPhoneClass[] = {
     { 0, "Uncategorized" },
     { 1, "Cellular" },
     { 2, "Cordless" },
     { 3, "Smart phone" },
     { 4, "Wired modem or voice gateway" },
     { 5, "Common ISDN Access" },
     { 6, "Sim Card Reader" },
     { -1, 0 }
 };
 
 static ClassMap_t MapAVClass[] = {
     { 0, "Uncategorized" },
     { 1, "Device conforms to the Headset profile" },
     { 2, "Hands-free" },
     { 3, 0 },
     { 4, "Microphone" },
     { 5, "Loudspeaker" },
     { 6, "Headphones" },
     { 7, "Portable Audio" },
     { 8, "Car Audio" },
     { 9, "Set-top box" },
     { 10, "HiFi Audio Device" },
     { 11, "VCR" },
     { 12, "Video Camera" },
     { 13, "Camcorder" },
     { 14, "Video Monitor" },
     { 15, "Video Display and Loudspeaker" },
     { 16, "Video Conferencing" },
     { 17, 0 },
     { 18, "Gaming/Toy" },
     { -1, 0 }
 };
 
 static ClassMap_t MapPeripheralClass[] = {
     { 16, "Keyboard" },
     { 32, "Pointing device" },
     { 48, "Combo keyboard/pointing device" },
     { -1, 0 }
 };
 
 typedef struct {
     int Major;
     ClassMap_t * Map;
 } MainClassMap_t;
 
 static MainClassMap_t MainClasses[] = {
     { 0, MapMiscClass },
     { 1, MapComputerClass },
     { 2, MapPhoneClass },
     { 3, 0 }, // special case
     { 4, MapAVClass },
     { 5, MapPeripheralClass },
     { 6, 0 }, // special case
     { 63, MapUnclassifiedClass },
     { -1, 0 }
 };
 
 OTDriver::OTDriver( OTGateway * _OT, struct hci_dev_info* di) : QObject( _OT ), Address() {
     OT = _OT;
     IsUp = 0;
     Socket = 0;
 
     init(di);
-    owarn << "Driver " << devname() << oendl;
+    odebug << "Driver " << devname() << oendl;
 
     AutoClose = new QTimer( this );
     connect( AutoClose,
              SIGNAL( timeout() ),
              this,
              SLOT( SLOT_CloseFd() )
            );
 }
 
 OTDriver::~OTDriver() {
     closeSocket();
     SLOT_CloseFd();
 }
 
 void OTDriver::SLOT_CloseFd( void ){
     if ( isOpen() ) {
       AutoClose->stop();
       ::close( fd() );
       setfd( -1 );
     }
 }
 
 void OTDriver::init(struct hci_dev_info* di) {
 
     Dev = di->name;
 
     setDevId(di->dev_id);
     setType(di->type);
     setFlags(di->flags);
     Address.setBDAddr( di->bdaddr );
     setFeatures(di->features);
     setfd( -1 ); // not open
 
     Manufacturer = "";
 }
 
 // internal reinitialize
 void OTDriver::reinit() {
     bool Old;
     Old = IsUp;
 
     if( currentState() < 0 )
       return;
 
     if( Old != IsUp ) {
       // state changes
       emit stateChange( this, IsUp );
     }
 }
 
 // requested by application
 int OTDriver::currentState() {
     struct hci_dev_info di;
 
     //  uint16_t tmp_dev_id = device_info.dev_id;
     //  bzero(&device_info,sizeof(struct hci_dev_info));
     //  device_info.dev_id = tmp_dev_id;
 
     memset( &di, 0, sizeof( di ) );
     di.dev_id = Dev_id;
     if( ioctl( OT->getSocket(), HCIGETDEVINFO, (void*)&di) < 0 ) {
       SLOT_CloseFd();
       return -1;
     } else {
       // load new info
       init(&di);
     }
 
     return IsUp;
 }
 
 bool OTDriver::open() {
 
     // (re)start single shot close
     AutoClose->start( 30000, TRUE );
 
     if( isOpen() )
       // is open
       return 1;
 
     setfd(hci_open_dev(devId()));
 
     if (fd() < 0) {
       emit error( tr( "Can't open device %1. %2 : %3" ).
                       arg( devname() ).
                       arg( errno ).
                       arg( strerror(errno) )
                 );
       return 0;
     }
 
     return 1;
 }
 
 QString OTDriver::name() {
     char name[1000];
 
     if( ! open() ) {
       return tr("Cannot open");
     }
 
     if (hci_read_local_name( fd(), sizeof(name), name, 1000) < 0) {
       if (errno != ETIMEDOUT) {
         emit error( tr("Can't read local name on %1. %2 : %3.  Default to %4" ).
             arg( devname() ).
             arg( errno  ).
             arg( strerror(errno) ).
             arg( devname() )
           );
       } // ETIMEDOUT error is quite normal, device is down ... I think ! :)
       strcpy(name,devname().latin1());
     }
     return QString(name);
 }
 
 void OTDriver::setFlags(unsigned long flags) {
 
     //  kdDebug() << "Setting OTDriver Values ..." << endl;
     IsUp = BTVALUE(hci_test_bit(HCI_UP, &flags));
 
     if (isUp()) {
         setIScan(BTVALUE(hci_test_bit(HCI_ISCAN, &flags)));
         setPScan(BTVALUE(hci_test_bit(HCI_PSCAN, &flags)));
         setAuthentication(BTVALUE(hci_test_bit(HCI_AUTH, &flags)));
         setEncryption(BTVALUE(hci_test_bit(HCI_ENCRYPT, &flags)));
     } else {
         setIScan(BT_UNKNOWN);
         setPScan(BT_UNKNOWN);
         setAuthentication(BT_UNKNOWN);
         setEncryption(BT_UNKNOWN);
     }
 }
 
 QString OTDriver::revision() {
 
     struct hci_version ver;
 
     if( ! open() ) {
       return tr("Cannot open");
     }
 
     if (hci_read_local_version(fd(), &ver, 1000) < 0) {
       emit error( tr( "Can't read revision info on %1. %2 : %3" ).
           arg( devname() ).
           arg( errno ).
           arg( strerror(errno) ) );
       return QString();
     }
 
     setManufacturer(ver.manufacturer);
 
     switch (ver.manufacturer) {
       case 0:
         return getRevEricsson();
         break;
       case 10:
         return getRevCsr(ver.hci_rev);
         break;
       default:
         return tr( "Unsupported manufacturer" );
         break;
     }
 }
 
 QString OTDriver::getRevEricsson() {
 
     char revision[102];
     struct hci_request rq;
 
     if( ! open() ) {
       return QString( "Cannot open" );
     }
 
     memset(&rq, 0, sizeof(rq));
     rq.ogf = 0x3f;
     rq.ocf = 0x000f;
     rq.cparam = NULL;
     rq.clen = 0;
     rq.rparam = &revision;
     rq.rlen = sizeof(revision);
 
     if (hci_send_req(fd(), &rq, 1000) < 0) {
       emit error( tr( "Can't read revision info on %1. %2 : %3" ).
           arg( devname() ).
           arg( errno ).
           arg( strerror(errno) ) );
       return QString();
     }
 
     return QString( revision+1 );
 }
 
 QString OTDriver::getRevCsr( unsigned short rev) {
 
     int i;
 
     for (i = 0; csr_map[i].str; i++)
       if (csr_map[i].rev == rev) {
         return QString( csr_map[i].str );
       }
 
     return tr( "Unknown firmware" );
 }
 
 int OTDriver::reset() {
 
     if( ! open() ) {
       return 0;
     }
 
     if( ioctl(fd(), HCIDEVRESET, devId()) < 0 ) {
       if( errno != EALREADY ) {
         emit error( tr( "Reset failed for %1. %2 : %3" ).
             arg( devname() ).
             arg( errno ).
             arg( strerror(errno) ) );
         if (errno == EACCES) {
           return EACCES;
         }
       }
     }
     return 0;
 }
 
 void OTDriver::setUp( bool M )  {
     if( M && ! isUp() ) {
       bringUp();
     } else if( ! M && isUp() ) {
       bringDown();
     }
 }
 
 void OTDriver::bringUp() {
 
-    owarn << "bringUp : " << Dev << oendl;
+    odebug << "bringUp : " << Dev << oendl;
 
     if( ! open() ) {
       return;
     }
 
     if (! isUp()) {
       if( ioctl(fd(), HCIDEVUP, devId()) < 0 ) {
         if( errno != EALREADY ) {
           emit error( tr( "Cannot bring interface %1 up. %2 : %3" ).
               arg( devname() ).
               arg( errno ).
               arg( strerror(errno) ) );
         }
         return;
       }
       // have to wait a bit for the 'up' to become active
       QTimer::singleShot( 3000, this, SLOT( reinit() ) );
     }
 }
 
 void OTDriver::bringDown() {
 
-    owarn << "bringDown : " << Dev << oendl;
+    odebug << "bringDown : " << Dev << oendl;
 
     if( ! open() ) {
       return;
     }
 
     if ( isUp() ) {
       if( ioctl(fd(), HCIDEVDOWN, devId()) < 0 ) {
         if( errno != EALREADY ) {
           emit error( tr( "Cannot bring interface %1 down. %2 : %3" ).
               arg( devname() ).
               arg( errno ).
               arg( strerror(errno) ) );
         }
         return;
       }
       reinit();
     }
 }
 
 void OTDriver::setScanMode(bool iscan, bool pscan) {
 
     struct hci_dev_req dr;
 
     if( ! open() ) {
       return;
     }
 
     dr.dev_id  = devId();
     dr.dev_opt = SCAN_DISABLED;
 
     if( iscan&&(!pscan) )
       dr.dev_opt = SCAN_INQUIRY;
     else if( pscan&&(!iscan) )
       dr.dev_opt = SCAN_PAGE;
     else if( pscan&&iscan )
       dr.dev_opt = SCAN_PAGE | SCAN_INQUIRY;
 
     if( ioctl(fd(), HCISETSCAN, (unsigned long)&dr) < 0 ) {
       if( errno != EALREADY ) {
         emit error( tr( "Can't set scan mode on %1. %2 : %3" ).
             arg( devname() ).
             arg( errno ).
             arg( strerror(errno) ) );
       }
       return;
     }
 
     reinit();
 }
 
 void OTDriver::changeDevName(const char* name) {
 
     if( ! open() ) {
       return;
     }
 
     if (hci_write_local_name(fd(), name, 1000) < 0) {
       emit error( tr( "Can't change local name on %1. %2 : %3" ).
           arg( devname() ).
           arg( errno ).
           arg( strerror(errno) ) );
     }
 }
 
 void OTDriver::changeAuthentication(bool _auth) {
     struct hci_dev_req dr;
 
     if( ! open() ) {
       return;
     }
 
     dr.dev_id  = devId();
     dr.dev_opt = _auth?AUTH_ENABLED:AUTH_DISABLED;
    
     if (ioctl(fd(),HCISETAUTH,(unsigned long)&dr) < 0) {
       if( errno != EALREADY ) {
         emit error( tr( "Can't change authentication on %1. %2 : %3" ).
             arg( devname() ).
             arg( errno ).
             arg( strerror(errno) ) );
       }
       return;
     }
     reinit();
 }
 
 void OTDriver::changeEncryption(bool _encrypt) {
     struct hci_dev_req dr;
 
     if( ! open() ) {
       return;
     }
 
     dr.dev_id  = devId();
     dr.dev_opt = _encrypt?ENCRYPT_P2P:ENCRYPT_DISABLED;
         
     if (ioctl(fd(),HCISETENCRYPT,(unsigned long)&dr) < 0) {
       if( errno != EALREADY ) {
         emit error( tr( "Can't change encryption on %1. %2 : %3" ).
             arg( devname() ).
             arg( errno ).
             arg( strerror(errno) ) );
       }
       return;
     }
 
     reinit();
 }
 
 void OTDriver::changeClass ( unsigned char service,  
                              unsigned char major,
                              unsigned char minor ) {
     unsigned long cod = 0;
     cod = (service << 16) |
           (major   <<  8) |
           (minor        ) ;
 
     if( ! open() ) {
       return;
     }
 
     if ( hci_write_class_of_dev(fd(),cod,1000) < 0 ) {
       emit error( tr( "Can't change class informations for %1. %2 : %3" ).
           arg( devname() ).
           arg( errno ).
           arg( strerror(errno) ) );
       return;
     }
 }
 
 void OTDriver::getClass( QString & service,  
                          QString & device ) {
     unsigned char cls[3];
 
     if( ! open() ) {
       return;
     }
 
     if ( hci_read_class_of_dev(fd(),cls,1000) < 0 ) {
       emit error( tr( "Can't read class information for %1. %2 : %3" ).
           arg( devname() ).
           arg( errno ).
           arg( strerror(errno) ) );
       return;
     }
 
     if( cls[2] ) {
       int first = 1;
       for ( unsigned int s = 0; s < sizeof(*services); s++) {
         if (cls[2] & (1 << s)) {
           if( !first )
             service += ", ";
           service += services[s];
           first = 0;
         }
       }
     } else {
       service = "unspecified";
     }
 
     MainClassMap_t * MCM = MainClasses;
     int major = cls[1] & 0x1f;
     int minor = cls[0] >> 2;
 
     if( (unsigned)(cls[1] & 0x1f) > sizeof(*major_devices)) {
       device = tr("Invalid Device Class");
       return;
     }
 
     device = major_devices[cls[1] & 0x1f];
 
     while( MCM->Major != -1 ) {
       if( major == MCM->Major ) {
         // this class
         ClassMap_t * CM = MCM->Map;
         if( MCM->Map ) {
           while( CM->Minor != -1 ) {
             if( minor == CM->Minor ) {
               break;
             }
             CM ++;
           }
           device = CM->Description;
         } else {
           // special case
           if( major == 3 ) {
             /* lan access */
             if( minor == 0 ) {
               device = "Uncategorized";
             } else {
               switch( minor / 8 ) {
                 case 0:
                   device = "Fully available";
                   break;
                 case 1:
                   device = "1-17% utilized";
                   break;
                 case 2:
                   device = "17-33% utilized";
                   break;
                 case 3:
                   device = "33-50% utilized";
                   break;
                 case 4:
                   device = "50-67% utilized";
                   break;
                 case 5:
                   device = "67-83% utilized";
                   break;
                 case 6:
                   device = "83-99% utilized";
                   break;
                 case 7:
                   device = "No service available";
                   break;
               }
             }
           } else if( major == 6 ) { /* imaging */
             if (minor & 4)
               device = "Display";
             if (minor & 8)
               device = "Camera";
             if (minor & 16)
               device = "Scanner";
             if (minor & 32)
               device = "Printer";
           }
         }
         break;
       }
       MCM ++;
     }
 
     if( MCM->Major == -1 ) {
       device = "Unknown (reserved) minor device class";
     }
 }
 
 QString OTDriver::strType() {
     return QString( hci_dtypetostr(Type) );
 }
 
 void OTDriver::setFeatures( unsigned char * _f) {
     Features = lmp_featurestostr(_f, NULL, 255);
 }
 
 void OTDriver::setManufacturer(int compid) {
     Manufacturer = bt_compidtostr(compid);
 }
 
 OTHCISocket * OTDriver::openSocket( void ) {
     if( ! Socket ) {
-      owarn << "Open HCI socket to " << devname() << oendl;
+      odebug << "Open HCI socket to " << devname() << oendl;
       Socket = new OTHCISocket( this );
     }
     return Socket;
 }
 
 void OTDriver::closeSocket( void ) {
     if( Socket ) {
-      owarn << "Close HCI socket to " << devname() << oendl;
+      odebug << "Close HCI socket to " << devname() << oendl;
       delete Socket;
       Socket = 0;
     }
 }
 
 QString OTDriver::getPeerName( const OTDeviceAddress & PAddr ) {
       QString S;
       char name[100 ];
 
       if( ! open() ) {
         return QString("N/A");
       }
 
       if( hci_read_remote_name( fd(), 
                                 &(PAddr.getBDAddr()), 
                                 sizeof(name), 
                                 name, 
                                 100000 ) < 0 ) {
         return QString( "N/A" );
       }
 
       return QString( name );
 }
 
 long OTDriver::getLinkQuality( const OTDeviceAddress & Addr ) {
       struct hci_conn_info_req *cr;
       struct hci_request rq;
       read_rssi_rp rp;
       uint16_t handle;
 
       if( ! open() ) {
         return 0;
       }
 
       cr = (struct hci_conn_info_req *)malloc(
                 sizeof(*cr) + sizeof(struct hci_conn_info));
       if (!cr)
         return 0;
 
       bacpy( &(cr->bdaddr), &(Addr.getBDAddr()) );
       cr->type = ACL_LINK;
 
       if (ioctl( fd(), HCIGETCONNINFO, (unsigned long) cr) < 0) {
-        owarn << "Get connection info failed" << oendl;
+        odebug << "Get connection info failed" << oendl;
         free(cr);
         return 0;
       }
 
       handle = htobs(cr->conn_info->handle);
 
       free(cr);
 
       memset(&rq, 0, sizeof(rq));
       rq.ogf    = OGF_STATUS_PARAM;
       rq.ocf    = OCF_READ_RSSI;
       rq.cparam = &handle;
       rq.clen   = 2;
       rq.rparam = &rp;
       rq.rlen   = GET_LINK_QUALITY_RP_SIZE;
 
       if (hci_send_req( fd(), &rq, 100) < 0) {
-         owarn << "Get connection info failed" << oendl;
+         odebug << "Get connection info failed" << oendl;
          return 0;
       }
 
       if( rp.status ) {
-        owarn << QString().sprintf("HCI get_link_quality cmd failed (0x%2.2X)", rp.status) << oendl;
+        odebug << QString().sprintf("HCI get_link_quality cmd failed (0x%2.2X)", rp.status) << oendl;
         return 0;
       }
 
       return rp.rssi+50;
 }
diff --git a/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp b/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp
index f703834..e5af742 100644
--- a/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp
@@ -1,86 +1,86 @@
 /***************************************************************************
  *   Copyright (C) 2003 by Mattia Merzi                                    *
  *   ottobit@ferrara.linux.it                                              *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   (at your option) any later version.                                   *
  ***************************************************************************/
 
 #include <malloc.h>
 #include <bluezlib.h>
 
 #include <opie2/odebug.h>
 
 #include <OTDriverList.h>
 #include <OTGateway.h>
 #include <OTDriver.h>
 
 using namespace Opietooth2;
 
 OTDriverList::OTDriverList( OTGateway * _OT ) : QVector<OTDriver>() {
 
     OT = _OT;
     setAutoDelete( true );
 }
 
 OTDriverList::~OTDriverList() {
 }
 
 void OTDriverList::update() {
 
     struct hci_dev_list_req *dl;
     struct hci_dev_req *dr;
     struct hci_dev_info di;
     int cur;
 
     dl = 0;
     cur = 0;
     do {
       cur += 5;
 
       dl = (struct hci_dev_list_req*)
           ::realloc( dl, sizeof( struct hci_dev_list_req ) +
                        ( cur * sizeof(struct hci_dev_req) )
                  );
 
       if( dl == 0 ) {
         // memory problem
         exit(1);
       }
 
       dl->dev_num = cur;
 
       if( ioctl( OT->getSocket(), HCIGETDEVLIST, (void*)dl) ) {
-        owarn << "WARNING : cannot read device list. "
+        odebug << "WARNING : cannot read device list. "
               << errno 
               << strerror( errno ) << oendl;
         return;
       }
 
       // if num == cur perhaps we did not get all devices yet
     } while( dl->dev_num == cur );
 
     if( dl->dev_num != count() ) {
       // new or missing devices
       clear();
 
       dr = dl->dev_req;
       resize( dl->dev_num );
 
       for( cur=0; cur < dl->dev_num; cur ++) {
           memset( &di, 0, sizeof( di ) );
           di.dev_id = (dr+cur)->dev_id;
 
           // get device info 
           if( ioctl( OT->getSocket(), HCIGETDEVINFO, (void*)&di) != 0 )
               continue;  // uh ?
           insert( cur, new OTDriver( OT, &di ) );
       }
 
-      owarn << "Found " << count() << " devices" << oendl;
+      odebug << "Found " << count() << " devices" << oendl;
 
       ::free( dl );
     }
 }
diff --git a/noncore/settings/networksettings2/opietooth2/OTGateway.cpp b/noncore/settings/networksettings2/opietooth2/OTGateway.cpp
index 6531cf6..e8137dd 100644
--- a/noncore/settings/networksettings2/opietooth2/OTGateway.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTGateway.cpp
@@ -29,494 +29,494 @@ OTGateway * OTGateway::getOTGateway( void ) {
       }
 
       UseCount ++;
       return SingleGateway;
 }
 
 void OTGateway::releaseOTGateway( void ) {
       UseCount --;
       if( UseCount == 0 ) {
         delete SingleGateway;
         SingleGateway = 0;
       }
 }
 
 // open bluetooth system
 OTGateway::OTGateway( void ) : QObject( 0, "OTGateway" ),
                                AllDrivers( this ),
                                AllPeers() {
 
       ErrorConnectCount = 0;
       TheOTDevice = 0;
       Scanning = 0;
       AllPeersModified = 0;
       AllPeers.setAutoDelete( TRUE );
 
       if ( ( HciCtl = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI)) < 0) {
         SLOT_ShowError( tr( "error opening hci socket" ) );
         return;
       }
 
       // load all known devices
       updateDrivers();
 
       // load all peers we have ever seen
       loadKnownPeers();
 
       // iterate over drivers and find active connections
       // adding/updating peers
       loadActiveConnections();
 
       // check every 4 seconds the state of BT
       timerEvent(0);
       RefreshTimer = -1;
       setRefreshTimer( 4000 );
 
       // load known link keys
       readLinkKeys();
 }
 
 // close bluetooth system
 OTGateway::~OTGateway( void ) {
 
       if( AllPeersModified ) {
         saveKnownPeers();
       }
 
       if( Scanning )
         delete Scanning;
 
       if( TheOTDevice )
         delete TheOTDevice;
 
       if( HciCtl >= 0 ) {
         ::close( HciCtl );
       }
 }
 
 void OTGateway::setRefreshTimer( int T ) {
       if( RefreshTimer != -1 ) {
         killTimer( RefreshTimer );
       }
 
       if( T == 0 ) 
         T = 4000;
       RefreshTimer = startTimer( T );
 }
 
 OTDevice * OTGateway::getOTDevice( ) {
       if( TheOTDevice == 0 ) {
         // load bluetooth device and check state
         TheOTDevice = new OTDevice( this );
         connect( TheOTDevice, 
                  SIGNAL( isEnabled( int, bool ) ),
                  this, 
                  SLOT( SLOT_Enabled( int, bool ) ) );
 
         connect( TheOTDevice, 
                  SIGNAL( error( const QString & ) ),
                  this, 
                  SLOT( SLOT_ShowError( const QString & ) ) );
       }
 
       return TheOTDevice;
 }
 
 // start bluetooth (if stopped)
 // return TRUE if started
 void OTGateway::SLOT_SetEnabled( bool Mode ) {
       if( Mode ) {
         SLOT_Enable();
         return;
       }
       SLOT_Disable();
 }
 
 void OTGateway::SLOT_Enable() {
       getOTDevice()->attach();
 }
 
 void OTGateway::SLOT_Disable() {
       getOTDevice()->detach();
 }
 
 bool OTGateway::needsEnabling() {
       return getOTDevice()->needsAttach();
 }
 
 bool OTGateway::isEnabled() {
       if( getOTDevice()->deviceNr() >= 0 &&
           driver( getOTDevice()->deviceNr() )->isUp() )
         return TRUE;
 
       // else check system
       return getOTDevice()->isAttached();
 }
 
 void OTGateway::SLOT_ShowError( const QString & S ) {
 
-      owarn << S << oendl;
+      odebug << S << oendl;
 
       if( ErrorConnectCount > 0 ) {
         // pass error
         emit error( QString( "<p>" ) + S + "</p>" );
         return;
       }
 
       QMessageBox::warning( 0,
           tr("OTGateway error"),
           S );
 }
 
 void OTGateway::connectNotify( const char * S ) {
       if( S && strcmp( S, "error(const QString&)" ) == 0 ) {
         ErrorConnectCount ++;
       }
 }
 
 void OTGateway::disconnectNotify( const char * S ) {
       if( S && strcmp( S, "error(const QString&)" ) == 0 ) {
         ErrorConnectCount --;
       }
 }
 
 void OTGateway::timerEvent( QTimerEvent * ) {
 
       OTDriver * D;
       unsigned int oldc = AllDrivers.count();
       bool old;
 
       AllDrivers.update();
 
       if( oldc != AllDrivers.count() ) {
         updateDrivers();
       } else {
         for( unsigned int i = 0;
              i < AllDrivers.count();
              i ++ ) {
           D = AllDrivers[i];
           old = D->isUp();
           if( D->currentState() >= 0 ) {
             if( old != D->isUp() ) {
               emit stateChange( D, D->isUp() );
             }
           } else {
             // if one driver is unable to provide info
             // we refresh all devices
             updateDrivers();
             return;
           }
         }
       }
 }
 
 void OTGateway::SLOT_Enabled( int id, bool Up ) {
-      owarn << "device " << id << " state " << Up << oendl;
+      odebug << "device " << id << " state " << Up << oendl;
       if( Up ) {
         // device is up -> detect it
         updateDrivers();
         if( (unsigned)id >= AllDrivers.count() ) {
           // to make sure that the driver really IS detected
           AllDrivers[id]->bringUp();
         }
       } // if DOWN device already down
       emit deviceEnabled( Up );
 }
 
 void OTGateway::updateDrivers( void ) {
       OTDriver * D;
 
       AllDrivers.update();
 
-      owarn << "updated drivers. now " << AllDrivers.count() << oendl;
+      odebug << "updated drivers. now " << AllDrivers.count() << oendl;
 
       // connect signals for each driver
       for( unsigned int i = 0;
            i < AllDrivers.count();
            i ++ ) {
         D = AllDrivers[i];
 
         connect( D, 
                  SIGNAL( error( const QString & ) ),
                  this, 
                  SLOT( SLOT_ShowError( const QString & ) )
                );
 
         connect( D, 
                  SIGNAL( stateChange( OTDriver *, bool ) ),
                  this, 
                  SIGNAL( stateChange( OTDriver *, bool ) )
                );
 
         connect( D, 
                  SIGNAL( driverDisappeared( OTDriver * ) ),
                  this, 
                  SLOT( SLOT_DriverDisappeared( OTDriver * ) )
                );
       }
 
       // verify main device too
       if( TheOTDevice )
         TheOTDevice->checkAttach();
 
       // set to default scanning hardware
       setScanWith( 0 );
 
       emit driverListChanged();
 }
 
 void OTGateway::SLOT_DriverDisappeared( OTDriver * D ) {
-      owarn << "Driver " << D->devname() << " when offline" << oendl;
+      odebug << "Driver " << D->devname() << " when offline" << oendl;
       updateDrivers();
 }
 
 void OTGateway::scanNeighbourhood( OTDriver * D ) {
 
       if( Scanning ) {
         stopScanOfNeighbourhood();
       }
 
       if( D ) {
         setScanWith( D );
       }
 
       Scanning = new OTInquiry( scanWith() );
 
       connect( Scanning,
                SIGNAL( peerFound( OTPeer *, bool )),
                this,
                SLOT( SLOT_PeerDetected( OTPeer *, bool ) )
              );
       connect( Scanning,
                SIGNAL( finished()),
                this,
                SLOT( SLOT_FinishedDetecting() )
              );
 
       // start scanning
       Scanning->inquire( 30.0 );
 }
 
 OTPeer* OTGateway::findPeer( const OTDeviceAddress & Addr ) {
       for( unsigned int i = 0 ; i < AllPeers.count(); i ++ ) {
         if( AllPeers[i]->address() == Addr ) {
           return AllPeers[i];
         }
       }
       return 0;
 }
 
 OTDriver* OTGateway::findDriver( const OTDeviceAddress & Addr ) {
       for( unsigned int i = 0 ; i < AllDrivers.count(); i ++ ) {
         if( AllDrivers[i]->address() == Addr ) {
           return AllDrivers[i];
         }
       }
       return 0;
 }
 
 void OTGateway::SLOT_PeerDetected( OTPeer * P, bool IsNew ) {
 
       if( IsNew ) {
         // new peer
-        owarn << "New peer " << P->name() << oendl;
+        odebug << "New peer " << P->name() << oendl;
         addPeer( P );
       }
 
       emit detectedPeer( P, IsNew );
 }
 
 void OTGateway::addPeer( OTPeer * P ) {
       AllPeers.resize( AllPeers.size()+1);
       AllPeers.insert( AllPeers.size()-1, P );
       AllPeersModified = 1;
 }
 
 void OTGateway::removePeer( OTPeer * P ) {
       int i = AllPeers.find( P );
       if( i ) {
         AllPeers.remove( i );
         AllPeersModified = 1;
       }
 }
 
 void OTGateway::stopScanOfNeighbourhood( void ) {
       if( Scanning ) {
         delete Scanning;
         Scanning = 0;
       }
 }
 
 void OTGateway::SLOT_FinishedDetecting() {
       stopScanOfNeighbourhood();
       emit finishedDetecting();
 }
 
 const char * OTGateway::deviceTypeToName( int cls ) {
     switch ( (cls & 0x001F00) >> 8) {
       case 0x00:
         return "misc";
       case 0x01:
         return "computer";
       case 0x02:
         return "phone";
       case 0x03:
         return "lan";
       case 0x04:
         return "av";
       case 0x05:
         return "peripheral";
       case 0x06:
         return "imaging";
       case 0x07:
       default :
         break;
     }
     return "unknown";
 }
 
 PANConnectionVector OTGateway::getPANConnections( void ) {
         PANConnectionVector V;
 
         struct bnep_connlist_req req;
         struct bnep_conninfo ci[48];
 
         V.setAutoDelete(TRUE);
 
         int ctl = socket(PF_BLUETOOTH, SOCK_RAW, BTPROTO_BNEP);
         if (ctl < 0) {
-          owarn << "Failed to open control socket" << oendl;
+          odebug << "Failed to open control socket" << oendl;
           return V;
         }
 
         req.cnum = 48;
         req.ci   = ci;
         if (ioctl(ctl, BNEPGETCONNLIST, &req)) {
-          owarn << "Failed to get connection list" << oendl;
+          odebug << "Failed to get connection list" << oendl;
           ::close( ctl );
           return V;
         }
 
         for ( unsigned i=0; i < req.cnum; i++) {
           V.resize( V.size() + 1 );
           if( ci[i].role == BNEP_SVC_PANU ) {
             // we are the client
             V.insert( V.size()-1, new OTPANConnection(
                             ci[i].device,
                             batostr((bdaddr_t *) ci[i].dst)
                           ) );
           }
         }
 
         ::close( ctl );
         return V;
 }
 
 struct link_key {
         bdaddr_t sba;
         bdaddr_t dba;
         uint8_t  key[16];
         uint8_t  type;
         time_t   time;
 };
 
 void OTGateway::readLinkKeys( void ) {
 
         struct link_key k;
         int rv;
 
         AllKeys.truncate(0);
 
         QFile F( "/etc/bluetooth/link_key" );
 
         if( ! F.open( IO_ReadOnly ) ) {
           emit error( tr("Cannot open link_key file") );
           return;
         }
 
         while( 1 ) {
           rv = F.readBlock( (char *)&k, sizeof( k ) );
           if( rv == 0 )
             // EOF
             break;
 
           if( rv < 0 ) {
             emit error( tr("Read error in link key file") );
           }
 
           AllKeys.resize( AllKeys.size()+1 );
           AllKeys[ AllKeys.size()-1 ].From.setBDAddr( k.sba );
           AllKeys[ AllKeys.size()-1 ].To.setBDAddr( k.dba );
         }
 }
 
 bool OTGateway::removeLinkKey( unsigned int Index ) {
         OTLinkKey & LK = AllKeys[Index];
 
         struct link_key k;
         int rv;
 
         QFile F( "/etc/bluetooth/link_key" );
         QFile OutF( "/etc/bluetooth/newlink_key" );
 
         if( ! F.open( IO_ReadOnly ) ) {
           emit error( tr("Cannot open link_key file") );
           return 0;
         }
 
         if( ! OutF.open( IO_WriteOnly | IO_Truncate ) ) {
           emit error( tr("Cannot open temporary link_key file") );
           return 0;
         }
 
         while( 1 ) {
           rv = F.readBlock( (char *)&k, sizeof( k ) );
           if( rv == 0 )
             // EOF
             break;
 
           if( rv < 0 ) {
             emit error( tr("Read error in link key file") );
             return 0;
           }
 
           if( LK.from() != OTDeviceAddress( k.sba ) ||
               LK.to() != OTDeviceAddress( k.dba ) ) {
             // copy
             OutF.writeBlock( (char *)&k, sizeof( k ) );
           } // else remove this key
         }
 
         // rename files
         QDir D( "/etc/bluetooth" );
 
         D.remove( "link_key" );
         D.rename( "newlink_key", "link_key" );
 
         // restart hcid
         system( "/etc/init.d/hcid stop" );
         system( "/etc/init.d/hcid start" );
 
         // remove from table
         if( Index < (AllKeys.size()-1) ) {
           // collapse array
           AllKeys[Index] = AllKeys[AllKeys.size()-1];
         }
 
         // remove last element
         AllKeys.resize( AllKeys.size()-1 );
 
         return 1;
 }
 
 #define MAXCONNECTIONS 10
 void OTGateway::loadActiveConnections( void ) {
 
         struct hci_conn_list_req *cl;
         struct hci_conn_info *ci;
         OTDeviceAddress Addr;
         OTPeer * P;
 
         if (!(cl = (struct hci_conn_list_req *)malloc( 
                       MAXCONNECTIONS * sizeof(*ci) + sizeof(*cl)))) {
           emit error( tr("Can't allocate memory") );
           return;
diff --git a/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp b/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp
index 471c3bf..1997b44 100644
--- a/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp
@@ -1,274 +1,274 @@
 //-*-c++-*-
 /***************************************************************************
  *   Copyright (C) 2003 by Fred Schaettgen                                 *
  *   kdebluetooth@schaettgen.de                                            *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   (at your option) any later version.                                   *
  ***************************************************************************/
 
 #include <qbuffer.h>
 #include <qtimer.h>
 #include <qdatastream.h>
 #include <opie2/odebug.h>
 
 #include <bluezlib.h>
 
 // #include "deviceaddress.h"
 #include <OTHCISocket.h>
 #include <OTDriver.h>
 
 using namespace Opietooth2;
 
 OTHCISocket::OTHCISocket( OTDriver * D ) :
                             QObject( D, D->devname() ) {
     BStatusSet = false;
     Driver = D;
     HCIReadNotifier = 0;
 }
 
 OTHCISocket::~OTHCISocket() {
     close();
 }
 
 void OTHCISocket::close() {
-    owarn << "OTHCISocket::close()" << oendl;
+    odebug << "OTHCISocket::close()" << oendl;
     if( HCIReadNotifier ) {
         delete HCIReadNotifier;
     }
 
     if( HCISocket.isValid() ) {
         HCISocket.close();
     }
 }
 
 bool OTHCISocket::open() {
 
-    owarn << "OTHCISocket::open()" << oendl;
+    odebug << "OTHCISocket::open()" << oendl;
     int s;
 
     s = ::socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI);
 
     if (s < 0) {
       emit error( tr( "Error creating socket on %1 : %2 %3").
                     arg( Driver->devname() ).
                     arg( errno ).
                     arg( strerror(errno) )
                 );
       return false;
     }
 
     /* Bind socket to the HCI device */
     struct sockaddr_hci sa;
     sa.hci_family = AF_BLUETOOTH;
     sa.hci_dev = Driver->devId();
     if (bind(s, (struct sockaddr *)&sa, sizeof(sa)) < 0) {
       ::close(s);
       emit error( tr( "Error binding to socket to %1 : %2 %3").
                     arg( Driver->devname() ).
                     arg( errno ).
                     arg( strerror(errno) )
                 );
       return false;
     }
 
     struct hci_filter flt;
     hci_filter_clear(&flt);
     hci_filter_set_ptype(HCI_EVENT_PKT, &flt);
     hci_filter_all_events(&flt);
     if( setsockopt(s, SOL_HCI, HCI_FILTER, &flt, sizeof(flt)) < 0 ) {
       ::close(s);
       emit error( tr( "HCI filter setup failed on %1 : %2 %3").
                     arg( Driver->devname() ).
                     arg( errno ).
                     arg( strerror(errno) )
                 );
       return false;
     }
 
     if( HCIReadNotifier ) {
       delete HCIReadNotifier;
     }
 
     HCISocket.setSocket(s, QSocketDevice::Datagram);
     HCIReadNotifier = new QSocketNotifier(
                   s, QSocketNotifier::Read, this);
 
     connect( HCIReadNotifier, 
              SIGNAL(activated(int)),
              this, 
              SLOT(slotSocketActivated())
            );
 
     //connect(hciSocket, SIGNAL(error(int)),
     //    this, SLOT(slotSocketError(int)));
     //connect(hciSocket, SIGNAL(connectionClosed()),
     //    this, SLOT(slotConnectionClosed()));
     //hciSocket->setSocket(s);
 
     return true;
 }
 
 void OTHCISocket::slotSocketError(int e) {
     close();
     emit error( tr( "HCI socket error 0x%1 on %1 : %2 %3").
                     arg(e,2,16).
                     arg( Driver->devname() ).
                     arg( errno ).
                     arg( strerror(errno) )
                 );
 }
 
 void OTHCISocket::slotSocketActivated() {
 
     QSocketDevice::Error err = HCISocket.error();
 
     if( (err == QSocketDevice::NoError ) && 
         ( HCISocket.isValid() ) ) {
       //kdDebug() << "HCI socket ready read." << endl;
 
       unsigned char buf[512];
       int psize = HCISocket.readBlock((char*)buf, 512);
 
       if (psize <= 0) {
         slotSocketError(HCISocket.error());
         HCISocket.close();
         return;
       }
 
       //unsigned char packetType = buf[0];
       unsigned char eventCode = buf[1];
       unsigned char len = buf[2];
 
       if (psize-3 == len) {
 
         QByteArray databuf;
         databuf.duplicate((char*)(buf+3), len);
         emit event(eventCode, databuf);
         if (eventCode == EVT_CMD_STATUS) {
           updateStatus( databuf );
         }
       } else {
-        owarn << "Error reading hci packet: packetSize("
+        odebug << "Error reading hci packet: packetSize("
               << psize
               << ")-3 != dataSize("
               << len
               << ")" 
               << oendl;
       }
     } else if (err == QSocketDevice::NoError) {
       slotConnectionClosed();
     } else {
         HCISocket.close();
         slotSocketError(err);
     }
 }
 
 void OTHCISocket::updateStatus(const QByteArray& data) {
 
     QDataStream stream(data, IO_ReadOnly);
     stream.setByteOrder(QDataStream::LittleEndian);
     Q_UINT8 status, dummy;
     Q_UINT16 opcode;
 
     BStatusSet = true;
 
     stream >> status >> dummy >> opcode;
     //kdDebug() << "updatestatus opcode=" << uint32_t(opcode) << endl;
     LastStatus = status;
     LastStatusOgf = cmd_opcode_ogf(opcode);
     LastStatusOcf = cmd_opcode_ocf(opcode);
 }
 
 void OTHCISocket::slotConnectionClosed() {
-    owarn << "HCI connection closed." << oendl;
+    odebug << "HCI connection closed." << oendl;
     emit connectionClosed();
 }
 
 void OTHCISocket::readEvent() {
 
     if (HCIReadNotifier) {
         slotSocketActivated();
     }
 }
 
 bool OTHCISocket::sendCommand( unsigned char ogf,
                                unsigned short ocf, 
                                QByteArray buf
                              ) {
     QBuffer packet;
     QDataStream stream(&packet);
 
     stream.setByteOrder(QDataStream::LittleEndian);
     packet.open(IO_WriteOnly);
 
     if (buf.size() > 255) return false;
 
     //kdDebug() << "sendCommand. ogf=" << ogf << " ocf=" << ocf << endl;
     Q_UINT16 opcode = cmd_opcode_pack(ogf, ocf);
     Q_UINT8 pType = HCI_COMMAND_PKT;
     Q_UINT8 buflen = buf.size();
 
     stream << pType << opcode << buflen;
     stream.writeRawBytes(buf.data(), buflen);
     packet.close();
     HCISocket.writeBlock((const char*)packet.buffer(), 
                          packet.buffer().size());
     return true;
 }
 
 bool OTHCISocket::readStatus( unsigned char ogf, 
                               unsigned short ocf, 
                               int *status, 
                               int timeout_ms) {
     QTimer timer;
 
     timer.start(timeout_ms, true);
     BStatusSet = false;
 
     while (timer.isActive() && HCISocket.isValid()) {
 
-        owarn << "OTHCISocket::readStatus()" << oendl;
+        odebug << "OTHCISocket::readStatus()" << oendl;
         bool timeout = false;
 
         if( HCISocket.bytesAvailable() == 0) {
           int rv = HCISocket.waitForMore(timeout_ms);
           timeout = (rv == 0);
         }
 
         if (!timeout) {
           slotSocketActivated();
         }
 
         if( BStatusSet == true && 
             ogf == LastStatusOgf && 
             ocf == LastStatusOcf) {
             *status = LastStatus;
-            owarn << "OTHCISocket::readStatus(ogf="
+            odebug << "OTHCISocket::readStatus(ogf="
                   << ogf
                   << ",ocf="
                   << ocf
                   << ",timeout="
                   << LastStatus
                   << ")"
                   << oendl;
             return true;
         }
     }
 
-    owarn << "OTHCISocket::readStatus(ogf="
+    odebug << "OTHCISocket::readStatus(ogf="
           << ogf
           << ",ocf="
           << ocf
           << ",timeout="
           << LastStatus
           << ") : timeout "
           << oendl;
     return false;
 }
 
 int OTHCISocket::socket() {
     return HCISocket.socket();
 }
diff --git a/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp b/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp
index 8e94bbc..2bc63c7 100644
--- a/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp
@@ -1,219 +1,219 @@
 //-*-c++-*-
 /***************************************************************************
  *   Copyright (C) 2003 by Fred Schaettgen                                 *
  *   kdebluetooth@schaettgen.de                                            *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   (at your option) any later version.                                   *
  ***************************************************************************/
 
 
 #include <qcstring.h>
 #include <qsocket.h>
 #include <qdatetime.h>
 #include <qtimer.h>
 #include <qthread.h>
 #include <qapplication.h>
 
 #include <bluezlib.h>
 
 #include <OTGateway.h>
 #include <OTDriver.h>
 #include <OTPeer.h>
 #include <OTHCISocket.h>
 #include <OTInquiry.h>
 
 #include <opie2/odebug.h>
 
 using namespace Opietooth2;
 
 #define max(a,b)        (((a)>(b)) ? (a) : (b))
 #define min(a,b)        (((a)>(b)) ? (b) : (a))
 
 OTInquiry::OTInquiry( OTDriver * Drv ) : QObject( Drv ) {
 
     reset();
 
     InquiryTimeoutTimer = new QTimer(this);
 
     connect( InquiryTimeoutTimer, 
              SIGNAL(timeout()),
              this, 
              SLOT(slotInquiryTimeout()));
 
     Driver = Drv;
     Socket = Drv->openSocket();
     Socket->open();
 
     connect( Socket, 
              SIGNAL( event(unsigned char, QByteArray)),
              this, 
              SLOT(slotHCIEvent(unsigned char, QByteArray)));
 }
 
 OTInquiry::~OTInquiry() {
     stopInquiring();
 }
 
 void OTInquiry::stopInquiring( void ) {
     if( Socket ) {
-      owarn << "Stop inquiry" << oendl;
+      odebug << "Stop inquiry" << oendl;
       Driver->closeSocket();
       Socket = 0;
     }
 }
 
 bool OTInquiry::inquire( double timeout, int numResponses, int lap) {
 
     QByteArray cmdBuf(5);
 
     cmdBuf[0] = lap & 0xFF;
     cmdBuf[1] = (lap >> 8) & 0xFF;
     cmdBuf[2] = (lap >> 16) & 0xFF;
     cmdBuf[3] = max(0x01, min(0x30, int(timeout/1.28)));
     cmdBuf[4] = (unsigned char)numResponses;
 
-    owarn << "Send HCI inquiry command. wait for " << cmdBuf[3] << oendl;
+    odebug << "Send HCI inquiry command. wait for " << cmdBuf[3] << oendl;
 
     Socket->sendCommand(0x01, 0x0001, cmdBuf);
 
     int status;
 
     if( Socket->readStatus(0x01, 0x0001, &status)) {
       if (status == 0) {
         SuccessfullyStarted = true;
         InquiryTimeoutTimer->start( int(1000*(timeout+1.0)), true);
         return true;
       }
       else {
         QString S =QString().sprintf( "%x", status );
-        owarn << "OTInquiry::inquiry() failed: 0x" << S << oendl;
+        odebug << "OTInquiry::inquiry() failed: 0x" << S << oendl;
         emit finished();
         return false;
       }
     } else {
-      owarn << "OTInquiry::inquiry(): Timeout." << oendl;
+      odebug << "OTInquiry::inquiry(): Timeout." << oendl;
       return false;
     }
 }
 
 bool OTInquiry::isInquiring() {
     return InquiryTimeoutTimer->isActive();
 }
 
 bool OTInquiry::isFinished() {
     return SuccessfullyStarted && SuccessfullyEnded;
 }
       
 void OTInquiry::reset() {
 
     SuccessfullyStarted = false;
     SuccessfullyEnded = false;
     //addrCache.clear();
     //infoQueue.clear();
 }
 
 
 void OTInquiry::onPeerFound( OTPeer * Peer, bool IsNew ) {
     emit peerFound( Peer, IsNew );
 }
 
 void OTInquiry::slotInquiryTimeout() {
     emit error( tr( "Timeout while waiting for end of inquiry.") );
 }
 
 void OTInquiry::slotHCIEvent(unsigned char eventCode, QByteArray buf) {
 
-    owarn << "OTInquiry: hci packet received: eventCode="
+    odebug << "OTInquiry: hci packet received: eventCode="
           << (unsigned int)eventCode 
           << " packetLength="
           << (unsigned int)buf.size() 
           << oendl;
 
     unsigned char *data = (unsigned char*)buf.data();
     switch (eventCode) {
       case EVT_INQUIRY_COMPLETE:
         { unsigned char status = data[0];
-          owarn << "EVT_INQUIRY_COMPLETE status=" << status << oendl;
+          odebug << "EVT_INQUIRY_COMPLETE status=" << status << oendl;
           InquiryTimeoutTimer->stop();
           if (status == 0) {
             if( SuccessfullyStarted == true) {
-              owarn << "OTInquiry ended successfully" << oendl;
+              odebug << "OTInquiry ended successfully" << oendl;
               SuccessfullyEnded = true;
             }
             emit finished();
           }
           else {
             emit error( tr( "OTInquiry completed with error (code %1)" ).
                           arg(status));
           }
         }
         break;
       case EVT_INQUIRY_RESULT:
         { int numResults = data[0];
           OTPeer * P = 0;
           bool IsNew;
           OTDeviceAddress Addr;
           QString N;
 
           inquiry_info *results = (inquiry_info*)(data+1);
 
           for (int n=0; n<numResults; n++) {
             Addr.setBDAddr( results[n].bdaddr );
 
-            owarn << "INQUIRY_RESULT: "
+            odebug << "INQUIRY_RESULT: "
                   << Addr.toString() 
                   << oendl;
 
             P = Driver->gateway()->findPeer( Addr );
 
             if( P ) {
               // peer known
               if( P->state() != OTPeer::Peer_Up ) {
                 P->setState( OTPeer::Peer_Up );
               }
               IsNew = 0;
             } else {
               IsNew = 1;
               // push the address to the address queue
               // where it can be consumed by nextNeighbour()
               P = new OTPeer( Driver->gateway() );
               P->setState( OTPeer::Peer_Up ); // we just detected it
               P->setAddress( Addr );
               //if( addrCache.find(info.addr) == addrCache.end()) {
               // addrCache.insert(info.addr);
 
               P->setDeviceClass( (results[n].dev_class[0] << 16) |
                                  (results[n].dev_class[1] << 8) |
                                  (results[n].dev_class[2] << 0) );
               // infoQueue.push_back(info);
               P->setName( Driver->getPeerName( Addr ) ); 
             }
 
             // call the handler. Emits a signal if not overwritten
             onPeerFound( P, IsNew );
 
             // }
           }
         }
         break;
       case EVT_CMD_STATUS :
         { int status = data[0];
           int numHciCmdPkts = data[1];
           int cmdOpcode = *((uint16_t*)(data+2));
-          owarn << "EVT_CMD_STATUS status=" 
+          odebug << "EVT_CMD_STATUS status=" 
                 << status
                 << " numPkts=" 
                 << numHciCmdPkts 
                 << " cmdOpcode="
                 << cmdOpcode 
                 << oendl;
           if (cmdOpcode == OCF_INQUIRY) {
 
           }
         }
         break;
     }
 }
diff --git a/noncore/settings/networksettings2/opietooth2/OTPeer.cpp b/noncore/settings/networksettings2/opietooth2/OTPeer.cpp
index 0d7e943..2272f04 100644
--- a/noncore/settings/networksettings2/opietooth2/OTPeer.cpp
+++ b/noncore/settings/networksettings2/opietooth2/OTPeer.cpp
@@ -1,366 +1,366 @@
 //-*-c++-*-
 /***************************************************************************
  *   Copyright (C) 2003 by Fred Schaettgen                                 *
  *   kdebluetooth@schaettgen.de                                            *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   (at your option) any later version.                                   *
  ***************************************************************************/
 
 #include <assert.h>
 #include <sys/poll.h>
 #include <string.h>
 
 #include <bluezlib.h>
 #include <qarray.h>
 #include <qtextstream.h>
 
 #include <opie2/odebug.h>
 
 #include <OTDeviceAddress.h>
 #include <OTSDPAttribute.h>
 #include <OTSDPService.h>
 #include <OTPeer.h>
 #include <OTGateway.h>
 #include <OTDriver.h>
 
 using namespace Opietooth2;
 
 OTPeer::OTPeer( OTGateway * _OT ) {
       OT = _OT;
       State = Peer_Unknown;
       ConnectedTo = 0;
 }
 
 OTPeer::OTPeer( QTextStream & TS, OTGateway * _OT ) {
       OT = _OT;
       State = Peer_Unknown;
       ConnectedTo = 0;
 
       load( TS );
 }
 
 OTPeer::~OTPeer( ) {
 
 }
 
 void OTPeer::updateServices( void ) {
     sdp_session_t *session;
 
     serviceList.clear();
 
-    owarn << "Get services from " << Addr.toString() << oendl;
+    odebug << "Get services from " << Addr.toString() << oendl;
 
     session = sdp_connect( &(OTDeviceAddress::any.getBDAddr()), 
                            &(Addr.getBDAddr()),
                            0);
 
     if (!session) {
-      owarn << "sdp_connect(" 
+      odebug << "sdp_connect(" 
             << Addr.toString()
             << ") failed"  
             << oendl;
         return; // error
     }
 
     uint32_t range = 0x0000ffff;
     sdp_list_t* attrId = sdp_list_append(0, &range);
 
     // search all public features
     uuid_t grp;
     sdp_uuid16_create( &grp, PUBLIC_BROWSE_GROUP );
     sdp_list_t * search = sdp_list_append(0, &grp );
 
     // get data from peer
     sdp_list_t* seq;
     if (sdp_service_search_attr_req( session, 
                                      search,
                                      SDP_ATTR_REQ_RANGE, 
                                      attrId, 
                                      &seq ) ) {
-      owarn << "Service Search failed" << oendl;
+      odebug << "Service Search failed" << oendl;
       sdp_close(session);
       return;
     }
 
     sdp_list_free(attrId, 0);
     sdp_list_free(search, 0);
 
     // process result
     sdp_list_t* next = NULL;
 
     for (; seq; seq = next) {
       sdp_record_t *rec = (sdp_record_t *) seq->data;
 
       sdp_list_t* attrlist = rec->attrlist;
       AttributeVector alist;
       OTSDPService * service;
 
       service = new OTSDPService();
 
       for (; attrlist; attrlist = attrlist->next) {
         int attrID = ((sdp_data_t*)(attrlist->data))->attrId;
         service->addAttribute( 
               attrID, 
               new OTSDPAttribute( (sdp_data_t*)(attrlist->data) )
             );
       }
 
       serviceList.resize( serviceList.size() + 1 );
       serviceList.insert( serviceList.size() - 1, service );
 
       next = seq->next;
       free(seq);
       sdp_record_free(rec);
     }
     sdp_close(session);
 }
 
 bool OTPeer::hasServiceClassID( const OTUUID & uuid) {
     for( unsigned int i = 0;
          i < serviceList.count();
          i ++ ) {
       if( serviceList[i]->hasClassID(uuid))
         return true;
     }
     return false;
 }
 /** Get a vector of Rfcomm channels of the services having "uuid" in the class ID List*/
 QArray<int> OTPeer::rfcommList( const OTUUID & uuid) {
 
     QArray<int> rfcommList;
     unsigned int channel;
 
     for( unsigned int i = 0;
          i < serviceList.count();
          i ++ ) {
       if( serviceList[i]->hasClassID(uuid)) {
         if( serviceList[i]->rfcommChannel(channel) ) {
           rfcommList.resize( rfcommList.size()+1 );
           rfcommList[rfcommList.size()-1] = channel;
         }
       }
     }
     return rfcommList;
 }
 
 void OTPeer::save( QTextStream & TS ) {
         TS << "bdaddr " << address().toString() << endl;
         TS << "name " << name() << endl;
         TS << "class " << deviceClass() << endl;
 }
 
 void OTPeer::load( QTextStream & TS ) {
       QString S;
       S = TS.readLine();
       setAddress( OTDeviceAddress( S.mid( 7 ) ) );
 
       S = TS.readLine();
       setName( S.mid( 5 ) );
 
       S = TS.readLine();
       setDeviceClass( S.mid( 6 ).toLong() );
 }
 
 #define MAGICNR         -99999
 #define POLLDELAY       1000
 #define PREMAGICNR      (MAGICNR+POLLDELAY)
 
 void OTPeer::findOutState( int timeoutInSec, bool Force ) {
       ProbeFD = -1;
       if( Force && ConnectedTo == 0 ) {
         State = OTPeer::Peer_Unknown;
       } // else keep state or is connected to us
 
       if( State == OTPeer::Peer_Unknown ) {
         ProbePhase = 0;
         ProbeTimeout = timeoutInSec*1000;
-        owarn << "Ping " << address().toString() << oendl;
+        odebug << "Ping " << address().toString() << oendl;
         startTimer( POLLDELAY );
       } else {
         ProbeTimeout = 0;
         startTimer( 0 );
       }
 }
 
 #define PINGSIZE        20
 void OTPeer::timerEvent( QTimerEvent * ev ) {
 
       ProbeTimeout -= POLLDELAY;
 
       if( State == OTPeer::Peer_Unknown ) {
         switch( ProbePhase ) {
           case 0 : // connect nonblock
             { struct sockaddr_l2 addr;
 
               if (( ProbeFD = ::socket(PF_BLUETOOTH, SOCK_RAW, BTPROTO_L2CAP)) < 0) {
                 ProbeTimeout = 0;
                 break;
               }
 
               memset(&addr, 0, sizeof(addr));
 
               addr.l2_family = AF_BLUETOOTH;
               addr.l2_bdaddr = OTDeviceAddress::any.getBDAddr();
 
               if( ::bind( ProbeFD, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
                 ProbeTimeout = 0;
                 break;
               }
 
               // non blocking
               if( ::fcntl( ProbeFD, F_SETFL, O_NONBLOCK ) < 0 ) {
                 ProbeTimeout = 0;
                 break;
               }
 
               // to this peer
               addr.l2_bdaddr = address().getBDAddr();
               if( ::connect( ProbeFD, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
                 if( errno != EAGAIN && errno != EINPROGRESS ) {
                   ProbeTimeout = 0;
                   break;
                 } // wait for connect to fail or succeed
               }
             }
             ProbePhase = 1; // wait for connect
             break;
           case 1 :
             { struct pollfd pf[1];
               char buf[L2CAP_CMD_HDR_SIZE + PINGSIZE + 20];
               int n;
 
               pf[0].fd = ProbeFD; 
               pf[0].events = POLLOUT;
               if( (n = ::poll(pf, 1, 0)) < 0 ) {
-                owarn << address().toString()
+                odebug << address().toString()
                       << " : errno " 
                       << errno 
                       << " " 
                       << strerror(errno)<<oendl;
                 ProbeTimeout = 0;
                 break;
               }
 
               if( ! n ) {
                 // not ready -> try again
                 break;
               }
 
               // send ping
               for( unsigned int i = L2CAP_CMD_HDR_SIZE; i < sizeof(buf); i++)
                   buf[i] = (i % 40) + 'A';
 
               l2cap_cmd_hdr *cmd = (l2cap_cmd_hdr *) buf;
 
               /* Build command header */
               cmd->code  = L2CAP_ECHO_REQ;
               cmd->ident = *(char *)this; // get some byte
               cmd->len   = PINGSIZE;
 
               /* Send Echo Request */
               if( ::send(ProbeFD, buf, PINGSIZE + L2CAP_CMD_HDR_SIZE, 0) <= 0) {
                 if( errno == EACCES ) {
                   // permission denied means that we could not
                   // connect because the device does not allow us
                   // but it is UP
-                  owarn << address().toString()
+                  odebug << address().toString()
                         << " good send error " 
                         << errno 
                         << " " 
                         << strerror( errno) 
                         << oendl;
                   State = OTPeer::Peer_Up;
                   ProbeTimeout = 0;
                   break;
                 } else if( errno != EBUSY ) {
-                  owarn << address().toString()
+                  odebug << address().toString()
                         << " : errno " 
                         << errno 
                         << " " 
                         << strerror(errno)
                         << oendl;
                   ProbeTimeout = 0;
                   break;
                 } // else want some more
               }
 
               ProbePhase = 2; // wait for ping reply
             }
             break;
           case 2 : // wait for reply
             { struct pollfd pf[1];
               char buf[L2CAP_CMD_HDR_SIZE + PINGSIZE + 20];
               l2cap_cmd_hdr *cmd = (l2cap_cmd_hdr *) buf;
               int n;
 
               pf[0].fd = ProbeFD; 
               pf[0].events = POLLIN;
               if( (n = ::poll(pf, 1, 0)) < 0 ) {
-                owarn << address().toString()
+                odebug << address().toString()
                       << " : errno " 
                       << errno 
                       << " " 
                       << strerror(errno)
                       <<oendl;
                 ProbeTimeout = 0;
                 break;
               }
 
               if( ! n ) {
                 // not ready -> try again
                 break;
               }
 
               if( (n = ::recv( ProbeFD, buf, sizeof(buf), 0)) < 0) {
-                owarn << address().toString()
+                odebug << address().toString()
                       << "errno " 
                       << errno 
                       << " " 
                       << strerror(errno) 
                       << oendl;
                 ProbeTimeout = 0;
                 break;
               }
 
               /* Check for our id */
               if( cmd->ident != *(char *)this )
                 // not our reply
                 break;
 
-              owarn << "reply from " 
+              odebug << "reply from " 
                     << address().toString()
                     << oendl;
               // whatever reply we get is a valid reply 
               State = OTPeer::Peer_Up;
               ProbeTimeout = 0;
             }
             break;
         }
 
         if( State != OTPeer::Peer_Unknown ) {
           ProbeTimeout = 0;
         }
       } 
 
       if( ProbeTimeout <= 0 ) {
         // regular timeout
         emit peerStateReport( this );
         if( State == Peer_Unknown ) {
           State = Peer_Down;
         }
         if( ProbeFD >= 0 ) {
           // requested to stop by caller -> stop probing
           ::close( ProbeFD );
         } 
         // no more waiting
         killTimer( ev->timerId() );
       }  // else sleep some more
 }
 
 void OTPeer::stopFindingOutState( void ) {
       ProbeTimeout = PREMAGICNR;
 }
 
diff --git a/noncore/settings/networksettings2/opietooth2/Opietooth.cpp b/noncore/settings/networksettings2/opietooth2/Opietooth.cpp
index b14cc2f..8323549 100644
--- a/noncore/settings/networksettings2/opietooth2/Opietooth.cpp
+++ b/noncore/settings/networksettings2/opietooth2/Opietooth.cpp
@@ -412,326 +412,326 @@ OTScan::OTScan( QWidget * parent, OTIcons * _IC ) :
 
       // populate State fram
       { QHBoxLayout * H =new QHBoxLayout( State_Frm );
 
         Paired_Led = new OLedBox( green, State_Frm );
         QLabel * L1 = new QLabel( tr( "Paired" ), State_Frm );
 
         H->addWidget( Paired_Led );
         H->addWidget( L1 );
         H->addStretch( 1 );
       }
 }
 
 OTScan::~OTScan() {
       if( MyIcons )
         delete Icons;
       OTGateway::releaseOTGateway();
 
       // send all peers that we do not care about states
       QListViewItem * Lit = DetectedPeers_LV->firstChild();
       while( Lit ) {
         ((PeerLVI *)Lit)->peer()->stopFindingOutState( );
         Lit = Lit->nextSibling();
       }
 }
 
 // static scan dialog function
 int OTScan::getDevice( OTPeer *& Peer, 
                        int & Channel, 
                        OTGateway * OT,
                        const UUIDVector & Filter,
                        QWidget* Parent ) {
       bool IsUp = 0;
       unsigned int i;
 
       // check if bluetooth is up
       OTDriverList & DL = OT->getDriverList();
       for( i = 0;
            i < DL.count();
            i ++ ) {
         if( DL[i]->isUp() ) {
           // one device that is up found
           IsUp = 1;
           break;
         }
       }
 
       // use this driver
       OT->setScanWith( OT->driver(i) );
 
       // create dialog
       QDialog * Dlg = new QDialog( Parent, 0, TRUE );
       QVBoxLayout * V = new QVBoxLayout( Dlg );
       OTScan * Scn = new OTScan( Dlg );
 
       connect( Scn,
                SIGNAL( selected() ),
                Dlg,
                SLOT( accept() )
              );
 
       if( Filter ) {
         Scn->setScanFilter( Filter );
       }
 
       V->addWidget( Scn );
       Dlg->setCaption( tr("Scan Neighbourhood" ) );
       Dlg->showMaximized();
       int rv = Dlg->exec();
 
       if( rv == QDialog::Accepted ) {
         // get peer
         Peer = Scn->selectedPeer();
         if( Peer == 0 ) {
           // no peer selected
           rv = QDialog::Rejected;
         } else {
           Channel = Scn->selectedChannel();
         }
       }
 
       delete Dlg;
 
       return rv;
 }
 
 void OTScan::setScanFilter( const UUIDVector & V ) {
       Filter = V;
 }
 
 void OTScan::resetScanFilter( void ) {
       Filter.truncate(0);
 }
 
 void OTScan::SLOT_DoScan( bool DoIt ) {
       if( DoIt ) {
         OT->scanNeighbourhood();
       } else {
         OT->stopScanOfNeighbourhood();
       }
 
       scanMode( DoIt );
 }
 
 // double clicked on a device
 void OTScan::SLOT_Selected( QListViewItem * it ) {
       if( ! it )
         return;
 
       if( Filter.count() > 0 ) {
         // filter on service 
         if( it->depth() == 0 ) {
           // select a service and not a device
           return;
         }
 
         // store result
         SelectedPeer = ((PeerLVI *)it->parent())->peer();
         SelectedChannel = ((ChannelLVI *)it)->channel();
       } else {
         // click on device
         if( it->depth() != 0 ) {
           return;
         }
 
         SelectedPeer = ((PeerLVI *)it)->peer();
         SelectedChannel = 0;
       }
-      owarn << "Selected " << SelectedPeer->address().toString() <<
+      odebug << "Selected " << SelectedPeer->address().toString() <<
             " Channel " << SelectedChannel << oendl;
       emit selected();
 }
 
 void OTScan::SLOT_FinishedDetecting( ) {
       scanMode( false );
 }
 
 void OTScan::SLOT_CleanupOld( ) {
 
       // iterate over all peers and find those that
       // are down and have no pairing info
       OTPeer * TheP;
       const LinkKeyArray & Keys = OT->getLinkKeys();
 
       QListViewItem * Lit = DetectedPeers_LV->firstChild();
       while( Lit ) {
         TheP = ((PeerLVI *)Lit)->peer();
         if( TheP->state() == OTPeer::Peer_Down ) {
           unsigned int k;
 
           // what about linkkeys ?
           for( k = 0; k < Keys.count(); k ++ ) {
             if( TheP->address() == Keys[k].to() ||
                 TheP->address() == Keys[k].from() 
               ) {
               // part of linkkey
-              owarn << "LINKKEY " << TheP->address().toString() << oendl;
+              odebug << "LINKKEY " << TheP->address().toString() << oendl;
               break;
             }
           }
 
           if( k == Keys.count() ) {
-            owarn << "RM LINKKEY " << TheP->address().toString() << oendl;
+            odebug << "RM LINKKEY " << TheP->address().toString() << oendl;
             // not found -> remember to remove this peer
             QListViewItem * Nit;
             OT->removePeer( TheP );
             Nit = Lit->nextSibling(); 
             delete Lit;
             Lit = Nit;
             continue;
           }
         } else {
-          owarn << "NODOWN " << TheP->address().toString() << oendl;
+          odebug << "NODOWN " << TheP->address().toString() << oendl;
         }
 
         Lit = Lit->nextSibling();
       }
 }
 
 void OTScan::SLOT_NewPeer( OTPeer * P, bool IsNew ){
       PeerLVI * it = 0;
 
       if( IsNew ) {
         it = new PeerLVI( P, DetectedPeers_LV );
       } else {
         // find peer in table
         QListViewItem * Lit = DetectedPeers_LV->firstChild();
         while( Lit ) {
           if( ((PeerLVI *)Lit)->peer() == P ) {
             // this item
             it = (PeerLVI *)Lit;
             break;
           }
           Lit = Lit->nextSibling();
         }
 
         if( ! it ) {
-          owarn << "Should not occur" << oendl;
+          odebug << "Should not occur" << oendl;
           return;
         }
       }
 
       // update/show info
       it->setText( 0, P->name() );
       it->setPixmap(0, Icons->deviceIcon( 
           OT->deviceTypeToName( P->deviceClass() ) ) );
 
       // tell peer to report its state async
       connect( P, 
                SIGNAL( peerStateReport( OTPeer *)),
                this,
                SLOT( SLOT_PeerState( OTPeer *))
              );
 
       if( IsNew ) {
         // find state
         refreshState( (PeerLVI *)it, 1 );
       } else {
         // update staet
         SLOT_PeerState( P );
       }
 }
 
 void OTScan::SLOT_PeerState( OTPeer * P ) {
       PeerLVI * it = (PeerLVI *)DetectedPeers_LV->firstChild();
       while( it ) {
         if( it->peer() == P ) {
           break;
         }
         it = (PeerLVI * )it->nextSibling();
       }
 
       if( ! it )
         return;
 
       switch( P->state() ) {
         case OTPeer::Peer_Unknown :
         case OTPeer::Peer_Down :
         it->setPixmap( 1, 0 );
           break;
         case OTPeer::Peer_Up :
           it->setPixmap( 1, Icons->loadPixmap( 
             ( P->connectedTo() ) ?  "connected" : "notconnected" ) );
           if( it == Current && ! StrengthTimer->isActive() ) {
             // start showing strength
             StrengthTimer->start( 1000, FALSE );
             SLOT_UpdateStrength();
           }
           break;
       }
 }
 
 void OTScan::SLOT_RefreshState( void ) {
 
       QListViewItem * it = DetectedPeers_LV->firstChild();
       while( it ) {
         if( it->isSelected() ) {
           break;
         }
         it = it->nextSibling();
       }
 
       if( ! it )
         return;
 
       refreshState( (PeerLVI *)it, 1 );
 }
 
 void OTScan::refreshState( PeerLVI * it, bool Force ) {
       it->setPixmap( 1, Icons->loadPixmap( "find" ) );
       it->peer()->findOutState( 30, Force );
 }
 
 void OTScan::SLOT_Show( QListViewItem * it ) {
 
       if( ! it || it->depth() > 0 )
         return;
 
       QString S;
 
       Current = (PeerLVI *)it;
 
       Strength_PB->setProgress( 0 ); // reset
       Address_LBL->setText( Current->peer()->address().toString() );
       Peer_GB->setTitle( Current->peer()->name() );
 
       const LinkKeyArray & Keys = OT->getLinkKeys();
 
       Paired_Led->setOn( FALSE );
       for( unsigned int i = 0;
            i < Keys.count();
            i ++ ) {
         if( Current->peer()->address() == Keys[i].to() ) {
           Paired_Led->setOn( TRUE );
           break;
         }
       }
 
       if( Current->peer()->state() == OTPeer::Peer_Up ) {
         RefreshServices_But->setEnabled( TRUE );
         StrengthTimer->start( 1000, FALSE );
         SLOT_UpdateStrength();
       } else {
         RefreshServices_But->setEnabled( FALSE );
       }
 
 }
 
 void OTScan::SLOT_UpdateStrength( void ) {
       OTDriver * D = Current->peer()->connectedTo();
 
       if( D ) {
         long Q = D->getLinkQuality( Current->peer()->address() );
         Strength_PB->setProgress( Q );
         if( ! Q ) {
           // no quality 
           Strength_PB->setEnabled( TRUE );
           StrengthTimer->stop();
         }
       } else {
         Strength_PB->setEnabled( FALSE );
         Strength_PB->setProgress( 0 );
         // no point in continuing
         StrengthTimer->stop();
       }
 }
@@ -804,257 +804,257 @@ void OTScan::SLOT_RefreshServices( void ) {
                 continue;
               }
             } // else show
 
             ID = UIDV[j].toShort();
             if( ID < 0x1200 || ID > 0x12ff ) {
               // use this profile
               if( R ) {
                 unsigned int ch;
                 bool has;
                 has = V[i]->rfcommChannel( ch );
                 SIt = new ChannelLVI( (has) ? (int)ch : -1 , PI );
                 SIt->setText(0, V[i]->name() );
 
                 Pm = Icons->serviceIcon( ID, R );
                 SIt->setPixmap(0, Pm );
                 Done = 1;
                 break;
               }
             }
           }
 
           if( ! Done ) {
             // check other range too
             for( unsigned int j = 0;
                  j < UIDV.count();
                  j ++ ) {
 
               if( Filter.count() ) {
                 bool FilterOut = 1;
                 // filter out if not in list
                 for( unsigned int ff = 0;
                      ff < Filter.count();
                      ff ++ ) {
                   if( UIDV[j] == Filter[ff] ) {
                     FilterOut = 0;
                     break;
                   }
                 }
 
                 if( FilterOut ) {
                   // not in filter list
                   continue;
                 }
               } // else show
 
               ID = UIDV[j].toShort();
               if( ID >= 0x1200 && ID <= 0x12ff ) {
                 // use this profile
                 unsigned int ch;
                 bool has;
                 has = V[i]->rfcommChannel( ch );
                 SIt = new ChannelLVI( (has) ? (int)ch : -1 , PI );
                 SIt->setText(0, V[i]->name() );
 
                 Pm = Icons->serviceIcon( ID, R );
                 SIt->setPixmap(0, Pm );
 
                 break;
               }
             }
           }
 
         }
       }
 
       scanMode( false );
 }
 
 void OTScan::scanMode( bool M ) {
       // avoid infinite loop because it triggers DoScan
       Detect_But->blockSignals( TRUE );
       Detect_But->setOn( M );
       Detect_But->setText( (M) ? tr("Scanning") : tr("Scan") );
       Detect_But->blockSignals( FALSE );
 }
 
 //
 //
 //
 //
 //
 
 OTManage::OTManage( QWidget * parent, OTIcons * _IC ) :
             OTManageGUI( parent ) {
 
       OT = OTGateway::getOTGateway();
 
       Icons = (_IC ) ? _IC : new OTIcons();
       MyIcons = (_IC == 0 );
       AllDrivers_LV->setSorting(-1);
 
       connect( OT, 
                SIGNAL( driverListChanged() ),
                this,
                SLOT( SLOT_DriverListChanged() ) 
              );
       connect( OT,
                SIGNAL( stateChange( OTDriver *, bool ) ),
                this,
                SLOT( SLOT_StateChange( OTDriver *, bool ) )
              );
 
       SLOT_DriverListChanged();
 
       AllDrivers_LV->header()->hide();
 }
 
 OTManage::~OTManage() {
       if( MyIcons )
         delete Icons;
       OTGateway::releaseOTGateway();
 }
 
 void OTManage::SLOT_ShowDriver( QListViewItem * It ) {
       if( It == 0 || It->depth() > 0 ) 
         // not toplevel
         return;
 
       DriverLVI * it = (DriverLVI *) It;
       DriverIsUp_CB->setChecked( it->driver()->isUp() );
 }
 
 void OTManage::SLOT_UpDriver( bool Up ) {
       QListViewItem * it = AllDrivers_LV->firstChild();
       while( it ) {
         if( it->isSelected() ) {
           OTDriver * D = ((DriverLVI *)it)->driver();
-          owarn << "UP driver " << D->devname() << oendl;
+          odebug << "UP driver " << D->devname() << oendl;
           // this
           D->setUp( Up );
           return;
         }
         it = it->nextSibling();
       }
 }
 
 void OTManage::SLOT_StateChange( OTDriver * D, bool Up ) {
       QListViewItem * it = AllDrivers_LV->firstChild();
       while( it ) {
         if( ((DriverLVI *)it)->driver() == D ) {
           it->setPixmap( 0, 
                Icons->loadPixmap( ( Up ) ?  "bluezon" : "bluezoff" ) );
           return;
         }
         it = it->nextSibling();
       }
 }
 
 void OTManage::SLOT_DriverListChanged( ) {
       DriverLVI * It;
       QListViewItem * Sub;
       QListViewItem * First = 0;
       OTDriver* D;
       OTDriverList & DL = OT->getDriverList();
 
       AllDrivers_LV->clear();
       for( unsigned int i = 0;
            i < DL.count();
            i ++ ) {
         D = DL[i];
         It = new DriverLVI( D, AllDrivers_LV );
 
         if( ! First )
           First = It;
 
         It->setText( 0, D->devname() );
         It->setPixmap( 0, 
              Icons->loadPixmap( (D->isUp()) ? 
                                   "bluezon" : "bluezoff" ) );
 
         Sub = new QListViewItem( It );
         Sub->setText( 0, tr( "Name" ) );
         Sub->setText( 1, D->name() ); 
 
         Sub = new QListViewItem( It );
         Sub->setText( 0, tr( "Address" ) );
         Sub->setText( 1, D->address().toString() ); 
 
         Sub = new QListViewItem( It );
         Sub->setText( 0, tr( "Revision" ) );
         Sub->setText( 1, D->revision() ); 
 
         Sub = new QListViewItem( It );
         Sub->setText( 0, tr( "Manufacturer" ) );
         Sub->setText( 1, D->manufacturer() ); 
 
         QString Service, Device;
         D->getClass( Service, Device );
 
         Sub = new QListViewItem( It );
         Sub->setText( 0, tr( "Service classes" ) );
         Sub->setText( 1, Service ); 
         Sub = new QListViewItem( It );
         Sub->setText( 0, tr( "Device class" ) );
         Sub->setText( 1, Device ); 
       }
 
       if( DL.count() ) {
         AllDrivers_LV->setCurrentItem( First );
         DriverIsUp_CB->setEnabled( TRUE );
       } else {
         DriverIsUp_CB->setChecked( FALSE );
         DriverIsUp_CB->setEnabled( FALSE );
       }
 }
 
 void OTManage::SLOT_SetRefreshTimer( int v ) {
       OT->setRefreshTimer( v * 1000 );
 }
 
 //
 //
 //
 //
 //
 
 OTMain::OTMain( QWidget * parent ) : OTMainGUI( parent ) {
 
       Icons = new OTIcons();
       SnifWindow = 0;
       OT = OTGateway::getOTGateway();
 
       connect( OT,
                SIGNAL( deviceEnabled( bool ) ),
                this,
                SLOT( SLOT_DeviceIsEnabled( bool ) )
              );
       connect( OT, 
                SIGNAL( driverListChanged() ),
                this,
                SLOT( SLOT_DriverListChanged() ) 
              );
       connect( OT,
                SIGNAL( stateChange( OTDriver *, bool ) ),
                this,
                SLOT( SLOT_StateChange( OTDriver *, bool ) )
              );
 
       if( ! OT->needsEnabling() ) {
         MustBeEnabled_CB->hide();
       } else {
         // detect current state
         MustBeEnabled_CB->setChecked(
             OT->isEnabled() );
       }
 
       SLOT_DriverListChanged();
 }
 
 OTMain::~OTMain() {
       OTGateway::releaseOTGateway();
       delete Icons;
 }
 
 void OTMain::SLOT_DriverListChanged() {
       OTDriver * D;
diff --git a/noncore/settings/networksettings2/opietooth2/config.in b/noncore/settings/networksettings2/opietooth2/config.in
index 720f49a..084e8c0 100644
--- a/noncore/settings/networksettings2/opietooth2/config.in
+++ b/noncore/settings/networksettings2/opietooth2/config.in
@@ -1,5 +1,5 @@
 config NS2OPIETOOTH
-  boolean "opie-networksettings2 bluetooth library"
+  boolean "Opietooth2 bluetooth library"
   default "y"
-  depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE 
+  depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && LIBBLUEZ_DEP && NS2CORE
 
diff --git a/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst b/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst
index cd605c2..2713c61 100755
--- a/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst
+++ b/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst
@@ -1,10 +1,10 @@
 #!/bin/sh
 
 QTPB=/opt/QtPalmtop/bin
 
 [ ! -L ${QTPB}/networksettings2-opietooth ] && ln -sf ${QTPB}/networksettings2 ${QTPB}/networksettings2-opietooth
 
 # qcop QPE/Taskbar "linkChanged(opietooth)"
-qcop QPE/Taskbar "reloadApps()"
+${QTPB}/qcop QPE/Taskbar "reloadApps()"
 
 exit 0
diff --git a/noncore/settings/networksettings2/opietooth2/opietooth2.pro b/noncore/settings/networksettings2/opietooth2/opietooth2.pro
index e0057a9..16277cf 100644
--- a/noncore/settings/networksettings2/opietooth2/opietooth2.pro
+++ b/noncore/settings/networksettings2/opietooth2/opietooth2.pro
@@ -1,37 +1,44 @@
 TEMPLATE        = lib
 CONFIG          += qt warn_on release
         #CONFIG         += qt warn_on debug
         DESTDIR         = $(OPIEDIR)/lib$(PROJMAK)
         HEADERS         = OTDevice.h  \
                   OTDriver.h  \
                   OTGateway.h \
                   OTHCISocket.h \
                   OTInquiry.h \
                   OTDeviceAddress.h \
                   OTIcons.h \
                   OTUUID.h \
                   OTSDPAttribute.h \
                   OTSDPService.h \
                   OTPeer.h \
                   Opietooth.h 
         SOURCES         = OTDevice.cpp \
                   OTDriver.cpp \
                   OTDriverList.cpp \
                   OTHCISocket.cpp \
                   OTInquiry.cpp \
                   OTDeviceAddress.cpp \
                   OTUUID.cpp \
                   OTSDPAttribute.cpp \
                   OTSDPService.cpp \
                   OTIcons.cpp \
                   OTPeer.cpp \
                   OTGateway.cpp \
                   Opietooth.cpp
         INCLUDEPATH+= $(OPIEDIR)/include ../networksettings2
         DEPENDPATH+= $(OPIEDIR)/include
 LIBS            += -lqpe -lopiecore2 -lbluetooth -lnetworksettings2
         INTERFACES= OTMainGUI.ui OTSniffGUI.ui OTScanGUI.ui OTManageGUI.ui OTPairingGUI.ui
         TARGET  = opietooth2
         VERSION         = 1.0.0
 
 include ( $(OPIEDIR)/include.pro )
+
+!isEmpty( LIBBLUEZ_INC_DIR ) {
+    INCLUDEPATH += $$LIBBLUEZ_INC_DIR
+}
+!isEmpty( LIBBLUEZ_LIB_DIR ) {
+    LIBS += -L$$LIBBLUEZ_LIB_DIR
+}
diff --git a/noncore/settings/networksettings2/profile/profilerun.cpp b/noncore/settings/networksettings2/profile/profilerun.cpp
index ab57a00..acb67bd 100644
--- a/noncore/settings/networksettings2/profile/profilerun.cpp
+++ b/noncore/settings/networksettings2/profile/profilerun.cpp
@@ -1,27 +1,27 @@
 #include <resources.h>
 
 #include "profilerun.h"
 
 State_t ProfileRun::detectState( void ) { 
     if( Data->Disabled ) {
       return Disabled;
     } 
     return Unknown;
 }
 
 QString ProfileRun::setMyState( NodeCollection * NC, Action_t A, bool ) { 
-    owarn << "Profile " << Data->Disabled << oendl;
+    odebug << "Profile " << Data->Disabled << oendl;
     if( A == Disable ) {
       if( ! Data->Disabled ) {
         Data->Disabled = 1;
         NC->setModified( 1 );
       }
     } else if( A == Enable ) {
       if( Data->Disabled ) { 
         Data->Disabled = 0;
         NC->setModified( 1 );
       }
     }
 
     return QString();
 }
diff --git a/noncore/settings/networksettings2/usb/usbrun.cpp b/noncore/settings/networksettings2/usb/usbrun.cpp
index eb439c1..de8c8a2 100644
--- a/noncore/settings/networksettings2/usb/usbrun.cpp
+++ b/noncore/settings/networksettings2/usb/usbrun.cpp
@@ -1,119 +1,120 @@
 #include <qfile.h>
 #include <qfileinfo.h>
 #include <qtextstream.h>
 #include <resources.h>
 #include "usbrun.h"
 
 State_t USBRun::detectState( void ) {
 
     // unavailable : no card found
     // available : card found and assigned to us or free
     // up : card found and assigned to us and up
 
     NodeCollection * NC = nodeCollection();
     QString S = QString( "/tmp/profile-%1.up" ).arg(NC->number());
     System & Sys = NSResources->system();
     InterfaceInfo * Run;
     QFile F( S );
     Log(("Detecting for %s\n", NC->name().latin1() ));
 
     if( F.open( IO_ReadOnly ) ) {
       // could open file -> read interface and assign
       QString X;
       QTextStream TS(&F);
       X = TS.readLine();
       Log(("%s exists\n", S.latin1() ));
       // find interface
       if( handlesInterface( X ) ) {
         for( QDictIterator<InterfaceInfo> It(Sys.interfaces());
              It.current();
              ++It ) {
           Run = It.current();
           if( X == Run->Name ) {
             NC->assignInterface( Run );
             return IsUp;
           }
         }
       }
     } 
 
     Log(("Assigned %p\n", NC->assignedInterface() ));
+
     if( ( Run = NC->assignedInterface() ) ) {
       // we already have an interface assigned -> still present ?
       if( ! Run->IsUp ) {
         // usb is still free -> keep assignment
         return Available;
       } // else interface is up but NOT us -> some other profile
     }
 
     // nothing (valid) assigned to us
     NC->assignInterface( 0 );
 
     // find possible interface
-    for( QDictIterator<InterfaceInfo> It(Sys.interfaces());
-         It.current();
-         ++It ) {
-      Run = It.current();
-
-      Log(("%s %d %d=%d %d\n",
-          Run->Name.latin1(),
-          handlesInterface( Run->Name ),
-              Run->CardType, ARPHRD_ETHER,
-              ! Run->IsUp ));
-
-      if( handlesInterface( Run->Name ) &&
-          Run->CardType == ARPHRD_ETHER &&
-          ! Run->IsUp
-        ) {
-        // proper type, and Not UP -> free
-        // usb cables are currently always available when requested
-        // until we can detect if we are plugged in
-        return Available;
-      }
+    if( getInterface() ) {
+      // proper type, and Not UP -> free
+      // usb cables are currently always available when requested
+      // until we can detect if we are plugged in
+      return Available;
     }
 
     return Unavailable;
 }
 
 QString USBRun::setMyState( NodeCollection * NC, Action_t A, bool ) {
 
-    // nothing needs to be done to 'activate' or 'deactivate' 
-    // a cable
+    InterfaceInfo * I = getInterface();
+
+    if( ! I ) {
+      return QString("No usb device available");
+    }
+
+    Log(( "Grabbed USB interface %s\n", I->Name.latin1() ));
+    // grab this interface
+    NC->assignInterface( I );
+
     return QString();
 }
 
 // get interface that is free or assigned to us
 InterfaceInfo * USBRun::getInterface( void ) {
 
     System & S = NSResources->system();
     InterfaceInfo * best = 0, * Run;
-    QRegExp R( "usb[0-9abcdef]" );
 
     for( QDictIterator<InterfaceInfo> It(S.interfaces());
          It.current();
          ++It ) {
       Run = It.current();
+
+      Log(("%s %d %d=%d %d\n",
+          Run->Name.latin1(),
+          handlesInterface( Run->Name ),
+              Run->CardType, ARPHRD_ETHER,
+              ! Run->IsUp ));
+
       if( handlesInterface( Run->Name ) &&
           Run->CardType == ARPHRD_ETHER
         ) {
         // this is a USB card
         if( Run->assignedConnection() == netNode()->connection() ) {
           // assigned to us
           return Run;
-        } else if( Run->assignedConnection() == 0 ) {
+        } else if( ! Run->IsUp &&
+                   Run->assignedConnection() == 0 ) {
           // free
           best = Run;
-        }
+        } // UP or not assigned to us
       }
     }
     return best; // can be 0
 }
 
 bool USBRun::handlesInterface( const QString & S ) {
     return Pat.match( S ) >= 0;
 }
 
 bool USBRun::handlesInterface( InterfaceInfo * I ) {
     return handlesInterface( I->Name );
 }