1 files changed, 1 insertions, 0 deletions

diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index c37fafd..da5db83 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -1,201 +1,202 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qhbox.h>
 #include <qregexp.h>
 
 #include "modemconfigwidget.h"
 #include "dialdialog.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
     m_device = new QLabel(tr( "Modem is attached to:" ), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel* telLabel = new QLabel( this );
     telLabel->setText( tr( "Enter telefon number here:" ) );
     m_telNumber = new QLineEdit( this );
     QHBox *buttonBox = new QHBox( this );
     QPushButton *atButton = new QPushButton( buttonBox );
     atButton->setText( tr( "AT commands" ) );
+    atButton->hide();
     connect( atButton, SIGNAL( clicked() ), this, SLOT( slotAT() ) );
 
     QPushButton *dialButton = new QPushButton( buttonBox );
     dialButton->setText( tr( "Enter number" ) );
     connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) );
 
 
     m_base = new IOLayerBase( this, "base" );
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( telLabel );
     m_lay->addWidget( m_telNumber );
     m_lay->addWidget( buttonBox );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttyS2" );
 
     atConf = new  ATConfigDialog( this, "ATConfig", true );
 }
 
 ModemConfigWidget::~ModemConfigWidget() {
 
 }
 void ModemConfigWidget::load( const Profile& prof ) {
 
     int rad_flow = prof.readNumEntry( "Flow" );
     int rad_parity = prof.readNumEntry( "Parity" );
     int speed = prof.readNumEntry( "Speed" );
     QString number = prof.readEntry( "Number" );
 
     if ( !number.isEmpty() ) {
         m_telNumber->setText( number );
     }
 
     if ( rad_flow == 1 ) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else if (rad_flow == 0) {
          m_base->setFlow( IOLayerBase::None );
     }
 
 
     if ( rad_parity == 1 ) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ){
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed( IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600 );
         break;
     case 38400:
         m_base->setSpeed( IOLayerBase::Baud_38400 );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200 );
         break;
     case 9600:
     default:
         m_base->setSpeed( IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry( "Device" ).isEmpty() ) {
         return;
     }
     setCurrent( prof.readEntry( "Device" ), m_deviceCmb );
 
     atConf->readConfig( prof );
 }
 
 /*
  * save speed,
  * flow,
  * parity
  */
 void ModemConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
     flow = parity = speed = 0;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry( "Flow", flow );
     prof.writeEntry( "Parity", parity );
     prof.writeEntry( "Speed", speed );
     prof.writeEntry( "Number", m_telNumber->text() );
 
 
     atConf->writeConfig(prof);
 }
 
 void ModemConfigWidget::slotAT() {
     //  ATConfigDialog conf( this, "ATConfig", true );
     atConf->showMaximized();
     if ( atConf->exec() != QDialog::Accepted ) {
         // reload old settings
     }
 }
 
 void ModemConfigWidget::slotDial() {
     DialDialog dial( this, "DialConfig", true );
     if(!m_telNumber->text().isEmpty()) {
         dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ \\.\\,]"), ""));
     }
     dial.showMaximized();
     if ( dial.exec() == QDialog::Accepted ) {
         m_telNumber->setText( dial.number() );
     }
 }