14 files changed, 57 insertions, 47 deletions

diff --git a/noncore/apps/opie-console/btconfigwidget.cpp b/noncore/apps/opie-console/btconfigwidget.cpp
index 6246f92..64046d8 100644
--- a/noncore/apps/opie-console/btconfigwidget.cpp
+++ b/noncore/apps/opie-console/btconfigwidget.cpp
@@ -1,188 +1,190 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qlineedit.h>
 #include <qcombobox.h>
 #include <qhbox.h>
 #include <qradiobutton.h>
 
 #include "iolayerbase.h"
 #include "btconfigwidget.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
-        for (uint i = 0; i < bo->count(); i++ ) {
+        for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 BTConfigWidget::BTConfigWidget( const QString& name,
                                 QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
 
     m_device = new QLabel( tr( "Device" ), this );
     QHBox *deviceBox = new QHBox( this );
     m_devRadio = new QRadioButton( deviceBox );
     connect( m_devRadio, SIGNAL( toggled( bool ) ), this, SLOT( slotDevRadio( bool ) ) );
     m_deviceCmb = new QComboBox( deviceBox );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel *macLabel = new QLabel( this );
     macLabel->setText( tr( "Or peer mac address" ) );
     QHBox *macBox = new QHBox( this );
     m_macRadio = new QRadioButton( macBox );
     connect( m_macRadio, SIGNAL( toggled( bool ) ), this, SLOT( slotMacRadio( bool ) ) );
     m_mac = new QLineEdit( macBox );
 
     m_base = new IOLayerBase(this, "base");
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( deviceBox );
     m_lay->addWidget( macLabel );
     m_lay->addWidget( macBox );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyU0" );
     m_deviceCmb->insertItem( "/dev/ttyU1" );
 }
 
 BTConfigWidget::~BTConfigWidget() {
 
 }
 void BTConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
     QString mac = prof.readEntry("Mac");
 
     if (!mac.isEmpty() ) {
         m_mac->setText( mac );
     } else {
         m_devRadio->setChecked( true );
     }
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else if (rad_flow == 0) {
          m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void BTConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
+    flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
+    default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
     prof.writeEntry("Mac", m_mac->text() );
 }
 
 void BTConfigWidget::slotMacRadio( bool on  ) {
     if ( on ) {
         m_devRadio->setChecked( false );
         m_deviceCmb->setEnabled( false );
         m_mac->setEnabled( true );
     } else {
         m_devRadio->setChecked( true );
     }
 }
 
 void BTConfigWidget::slotDevRadio( bool on  ) {
     if ( on ) {
         m_macRadio->setChecked( false );
         m_deviceCmb->setEnabled( true );
         m_mac->setEnabled( false );
     } else {
         m_macRadio->setChecked( true );
     }
 }
diff --git a/noncore/apps/opie-console/default.cpp b/noncore/apps/opie-console/default.cpp
index 0160b56..19640d8 100644
--- a/noncore/apps/opie-console/default.cpp
+++ b/noncore/apps/opie-console/default.cpp
@@ -1,121 +1,121 @@
 #include "io_serial.h"
 #include "io_irda.h"
 #include "io_bt.h"
 #include "io_modem.h"
 #include "filetransfer.h"
 #include "filereceive.h"
 #include "serialconfigwidget.h"
 #include "irdaconfigwidget.h"
 #include "btconfigwidget.h"
 #include "modemconfigwidget.h"
 #include "terminalwidget.h"
 #include "function_keyboard.h"
 #include "MyPty.h"
 
 #include "default.h"
 
 extern "C" {
     // FILE Transfer Stuff
     FileTransferLayer* newSZTransfer(IOLayer* lay) {
         return new FileTransfer( FileTransfer::SZ, lay );
     }
     FileTransferLayer* newSYTransfer(IOLayer* lay) {
         return new FileTransfer( FileTransfer::SY, lay );
     }
     FileTransferLayer* newSXTransfer(IOLayer* lay) {
         return new FileTransfer(FileTransfer ::SX, lay );
     }
 
     // FILE Transfer Receive Stuff
     ReceiveLayer* newSZReceive(IOLayer* lay) {
         return new FileReceive( FileReceive::SZ, lay );
     }
     ReceiveLayer* newSYReceive(IOLayer* lay) {
         return new FileReceive( FileReceive::SY, lay );
     }
     ReceiveLayer* newSXReceive(IOLayer* lay) {
         return new FileReceive(FileReceive::SX, lay );
     }
 
     // Layer stuff
     IOLayer* newSerialLayer( const Profile& prof) {
         return new IOSerial( prof );
     }
     IOLayer* newBTLayer( const Profile& prof ) {
         return new IOBt( prof );
     }
     IOLayer* newIrDaLayer( const Profile& prof ) {
         return new IOIrda( prof );
     }
     IOLayer* newModemLayer( const Profile& prof ) {
         return new IOModem( prof );
     }
     IOLayer* newConsole( const Profile& prof ) {
         return new MyPty( prof );
     }
 
     // Connection Widgets
     ProfileDialogWidget* newSerialWidget( const QString& str, QWidget* wid ) {
         return new SerialConfigWidget( str, wid );
     }
     ProfileDialogWidget* newIrDaWidget( const QString& str, QWidget* wid ) {
         return new IrdaConfigWidget( str, wid );
     }
     ProfileDialogWidget* newModemWidget( const QString& str, QWidget* wid ) {
         return new ModemConfigWidget(str, wid );
     }
     ProfileDialogWidget* newBTWidget( const QString& str, QWidget* wid ) {
         return new BTConfigWidget(str, wid );
     }
-    ProfileDialogWidget* newConsoleWid( const QString& str, QWidget* wid ) {
+    ProfileDialogWidget* newConsoleWid( const QString& , QWidget*  ) {
         return 0l;
     }
 
 
     // Terminal Widget(s)
     ProfileDialogWidget* newTerminalWidget(const QString& na, QWidget* wid) {
         return new TerminalWidget(na, wid,0 );
     }
 
     // Function Keyboard Widget
     ProfileDialogWidget* newKeyboardWidget(const QString& na, QWidget *wid) {
         return new FunctionKeyboardConfig(na, wid);
     }
 
 /*    // VT Emulations
     EmulationLayer* newVT102( WidgetLayer* wid ) {
         return new Vt102Emulation( wid );
     }
 */
 };
 
 Default::Default( MetaFactory* fact ) {
     fact->addFileTransferLayer( "SZ", QObject::tr("Z-Modem"), newSZTransfer );
     fact->addFileTransferLayer( "SY", QObject::tr("Y-Modem"), newSYTransfer );
     fact->addFileTransferLayer( "SX", QObject::tr("X-Modem"), newSXTransfer );
 
     fact->addReceiveLayer( "SZ", QObject::tr("Z-Modem"), newSZReceive );
     fact->addReceiveLayer( "SY", QObject::tr("Y-Modem"), newSYReceive );
     fact->addReceiveLayer( "SX", QObject::tr("X-Modem"), newSXReceive );
 
     fact->addIOLayerFactory( "serial", QObject::tr("Serial"), newSerialLayer );
     fact->addIOLayerFactory( "irda", QObject::tr("Infrared"), newIrDaLayer   );
     fact->addIOLayerFactory( "bt", QObject::tr("Bluetooth"),  newBTLayer     );
     fact->addIOLayerFactory( "modem", QObject::tr("Modem"),   newModemLayer  );
     fact->addIOLayerFactory( "console", QObject::tr("Console"), newConsole   );
 
     fact->addConnectionWidgetFactory( "serial", QObject::tr("Serial"), newSerialWidget );
     fact->addConnectionWidgetFactory( "irda", QObject::tr("Infrared"), newIrDaWidget );
     fact->addConnectionWidgetFactory( "modem", QObject::tr("Modem"), newModemWidget );
     fact->addConnectionWidgetFactory( "bt", QObject::tr("Bluetooth"), newBTWidget );
     fact->addConnectionWidgetFactory( "console", QObject::tr("Console"), newConsoleWid );
 
     fact->addTerminalWidgetFactory( "default", QObject::tr("Default Terminal"),  newTerminalWidget );
     fact->addKeyboardWidgetFactory( "defaultKeys", QObject::tr("Default Keyboard"),
  newKeyboardWidget );
 
 //    fact->addEmulationLayer( "default", QObject::tr("Default Terminal"), newVT102 );
 }
 Default::~Default() {
 
 }
diff --git a/noncore/apps/opie-console/dialer.cpp b/noncore/apps/opie-console/dialer.cpp
index d37e406..5056040 100644
--- a/noncore/apps/opie-console/dialer.cpp
+++ b/noncore/apps/opie-console/dialer.cpp
@@ -3,299 +3,299 @@
 #include <qlayout.h>
 #include <qprogressbar.h>
 #include <qlabel.h>
 #include <qpushbutton.h>
 #include <qapp.h>
 #include <qtimer.h>
 #include <qmessagebox.h>
 
 #include <unistd.h>
 #include <string.h>
 #include <fcntl.h>
 #include <errno.h>
 
 // State machine:          | When an error occurs, we don't have to
 //                         | reset everything.
 // (init) <------+         | But if the user wants to reset,
 //   |           |         | we stop dialing immediately.
 //   v           |         |
 // (options) ----+         | Following the state machine is necessary
 //   |       \             | to get determinable results.
 //   v        ^            |
 // (dial) ----+            |
 //   |        ^            |
 //   v        |            |
 // (online) --+            |
 //   |                     |
 //   v                     |
 
 
 // from atconfigdialog
 //initStringLine->setText( config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING ) );
 //resetStringLine->setText( config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING ) );
 //dialPref1Line->setText( config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ) );
 //dialSuf1Line->setText( config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
 //dialPref2Line->setText( config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 ) );
 //dialSuf2Line->setText( config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
 //dialPref3Line->setText( config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 ) );
 //dialSuf3Line->setText( config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
 //connectLine->setText( config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING ) );
 //hangupLine->setText( config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) );
 
 // from modemconfigwidget
 //int rad_flow = prof.readNumEntry("Flow");
 //int rad_parity = prof.readNumEntry("Parity");
 //int speed = prof.readNumEntry("Speed");
 //QString number = prof.readEntry("Number");
 
 Dialer::Dialer(const Profile& profile, int fd, QWidget *parent, const char *name)
 : QDialog(parent, name, true), m_fd(fd), m_profile(profile)
 {
         QVBoxLayout *vbox;
         QLabel *desc;
 
         //m_profile.writeEntry("InitString", "ATZ");
         //m_profile.writeEntry("DialPrefix1", "ATDT");
         //m_profile.writeEntry("Termination", "\n");
 
         usercancel = 0;
         cleanshutdown = 0;
 
         fcntl(m_fd, F_SETFL, O_NONBLOCK);
 
         desc = new QLabel(QObject::tr("Dialing number: %1").arg(m_profile.readEntry("Number")), this);
         progress = new QProgressBar(this);
         status = new QLabel("", this);
         status->setFrameStyle(QFrame::Panel | QFrame::Sunken);
         cancel = new QPushButton(QObject::tr("Cancel"), this);
 
         vbox = new QVBoxLayout(this, 2);
         vbox->add(desc);
         vbox->add(progress);
         vbox->add(status);
         vbox->add(cancel);
 
         connect(cancel, SIGNAL(clicked()), SLOT(slotCancel()));
 
         show();
 
         QTimer::singleShot(500, this, SLOT(slotAutostart()));
 }
 
 Dialer::~Dialer()
 {
 }
 
 void Dialer::setHangupOnly()
 {
         state = state_cancel;
         usercancel = 1;
 }
 
 void Dialer::slotCancel()
 {
         if(state != state_online)
         {
                 usercancel = 1;
                 reset();
         }
         else accept();
 }
 
 void Dialer::reset()
 {
         switchState(state_cancel);
 }
 
 void Dialer::slotAutostart()
 {
         //state = state_preinit;
         dial(m_profile.readEntry("Number"));
 }
 
 void Dialer::dial(const QString& number)
 {
         while(state != state_online)
         {
                 if(!usercancel)
                 {
                         state = state_preinit;
                         trydial(number);
                 }
                 else break;
         }
 
         if(usercancel)
         {
                 // modem hangup
                 trydial(QString::null);
                 reject();
         }
 }
 
 void Dialer::trydial(const QString& number)
 {
         if(state != state_cancel) switchState(state_preinit);
         if(cleanshutdown)
         {
                 send(m_profile.readEntry("HangupString"));
                 //send("+++ATH");
                 send("");
         }
 
         if(state != state_cancel)
         {
                 switchState(state_init);
                 //send("ATZ");
                 send(m_profile.readEntry("InitString"));
                 QString response2 = receive();
                 if(!response2.contains("\nOK\r"))
                         reset();
         }
 
         if(state != state_cancel)
         {
                 switchState(state_options);
 
                 send("ATM3L3");
                 QString response3 = receive();
                 if(!response3.contains("\nOK\r"))
                         reset();
         }
 
         if(state != state_cancel)
         {
                 switchState(state_dialtone);
 
                 send("ATX1");
                 QString response4 = receive();
                 if(!response4.contains("\nOK\r"))
                         reset();
         }
 
         if(state != state_cancel)
         {
                 switchState(state_dialing);
 
                 //send(QString("ATDT %1").arg(number));
                 send(QString("%1 %2").arg(m_profile.readEntry("DialPrefix1")).arg(number));
                 QString response5 = receive();
                 if(!response5.contains("\n" + m_profile.readEntry("DefaultConnect")))
                 {
                         if(response5.contains("BUSY"))
                                 switchState(state_dialing);
                         else
                         {
                                 QMessageBox::warning(this,
                                         QObject::tr("Failure"),
                                         QObject::tr("Dialing the number failed."));
                                 slotCancel();
                         }
                 }
         }
-        
+
         if(state != state_cancel)
         {
                 switchState(state_online);
         }
 }
 
 void Dialer::send(const QString& msg)
 {
         QString m = msg;
         int bytes;
         QString termination;
 
         //qWarning("Sending: '%s'", m.latin1());
 
         termination = "\r";
         //termination = m_profile.readEntry("Termination");
         if(termination == "\n") m = m + "\n";
         else if(termination == "\r") m = m + "\r";
         else m = m + "\r\n";
 
         bytes = ::write(m_fd, m.local8Bit(), strlen(m.local8Bit()));
         if(bytes < 0)
         {
                 reset();
         }
 }
 
 QString Dialer::receive()
 {
         QString buf;
         char buffer[1024];
         int ret;
-        int counter;
+        int counter = 0;
 
         while(1)
         {
                 ret = ::read(m_fd, buffer, sizeof(buffer));
 
                 if(ret > 0)
                 {
                         for(int i = 0; i < ret; i++)
                                 buffer[i] = buffer[i] & 0x7F;
                         buffer[ret] = 0;
                         //qWarning("Got: '%s'", buffer);
                         buf.append(QString(buffer));
                         if(buf.contains("OK") || buf.contains("ERROR") || buf.contains("CONNECT") || (buf.contains("BUSY")))
                         {
                                 //qWarning("Receiving: '%s'", buf.latin1());
                                 cleanshutdown = 1;
                                 return buf;
                         }
                 }
                 else if(ret < 0)
                 {
                         if(errno != EAGAIN) reset();
                         else if(!(counter++ % 100)) qApp->processEvents();
                 }
                 else if(!(counter++ % 100)) qApp->processEvents();
 
                 if(usercancel) return QString::null;
         }
 
         cleanshutdown = 1;
         return QString::null;
 }
 
 void Dialer::switchState(int newstate)
 {
         int oldstate = state;
         state = newstate;
 
         switch(state)
         {
                 case state_cancel:
                         status->setText(QObject::tr("Cancelling..."));
                         progress->setProgress(0);
                         break;
                 case state_preinit:
                         status->setText(QObject::tr("Searching modem"));
                         progress->setProgress(10);
                         break;
                 case state_init:
                         status->setText(QObject::tr("Initializing..."));
                         progress->setProgress(20);
                         break;
                 case state_options:
                         status->setText(QObject::tr("Reset speakers"));
                         progress->setProgress(30);
                         break;
                 case state_dialtone:
                         status->setText(QObject::tr("Turning off dialtone"));
                         progress->setProgress(40);
                         break;
                 case state_dialing:
                         if(oldstate != state_dialing) status->setText(QObject::tr("Dial number"));
                         else status->setText(QObject::tr("Line busy, redialing number"));
                         progress->setProgress(50);
                         break;
                 case state_online:
                         status->setText(QObject::tr("Connection established"));
                         progress->setProgress(100);
                         cancel->setText(QObject::tr("Dismiss"));
                         break;
         }
 }
 
diff --git a/noncore/apps/opie-console/dialer.h b/noncore/apps/opie-console/dialer.h
index 28303f3..88681a3 100644
--- a/noncore/apps/opie-console/dialer.h
+++ b/noncore/apps/opie-console/dialer.h
@@ -1,54 +1,54 @@
 #ifndef DIALER_H
 #define DIALER_H
 
 #include <qdialog.h>
 
 #include "profile.h"
 
 class QLabel;
 class QProgressBar;
 
 class Dialer : public QDialog
 {
         Q_OBJECT
         public:
                 Dialer(const Profile& profile, int fd, QWidget *parent = NULL, const char *name = NULL);
                 ~Dialer();
                 void setHangupOnly();
 
         public slots:
                 void slotCancel();
                 void slotAutostart();
 
         private:
                 void switchState(int newstate);
                 void reset();
                 void dial(const QString& number);
                 void trydial(const QString& number);
 
                 void send(const QString& msg);
                 QString receive();
 
                 enum States
                 {
                         state_cancel,
                         state_preinit,
                         state_init,
                         state_options,
                         state_dialtone,
                         state_dialing,
                         state_online
                 };
 
                 QLabel *status;
                 QProgressBar *progress;
                 QPushButton *cancel;
                 int state;
                 int usercancel;
+                int m_fd;
                 const Profile& m_profile;
-                int m_fd;
                 int cleanshutdown;
 };
 
 #endif
 
diff --git a/noncore/apps/opie-console/function_keyboard.cpp b/noncore/apps/opie-console/function_keyboard.cpp
index fd20e99..100fdfc 100644
--- a/noncore/apps/opie-console/function_keyboard.cpp
+++ b/noncore/apps/opie-console/function_keyboard.cpp
@@ -1,182 +1,182 @@
 #include "function_keyboard.h"
-#include <qsizepolicy.h> 
+#include <qsizepolicy.h>
 #include <qevent.h>
 #include <qwindowsystem_qws.h>
 #include <qapplication.h>
 #include <qlayout.h>
 
-FunctionKeyboard::FunctionKeyboard(QWidget *parent) : 
-    QFrame(parent), numRows(2), numCols(11), 
+FunctionKeyboard::FunctionKeyboard(QWidget *parent) :
+    QFrame(parent), numRows(2), numCols(11),
     pressedRow(0), pressedCol(0) {
 
     setSizePolicy(QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::Fixed));
 
     Config conf("opie-console-keys");
     conf.setGroup("keys");
     for (uint r = 0; r < numRows; r++)
         for (uint c = 0; c < numCols; c++) {
 
             QString handle = "r" + QString::number(r) + "c" + QString::number(c);
             QStringList value_list = conf.readListEntry( handle, '|');
 
             if (value_list.isEmpty()) continue;
 
             keys.insert(
 
-                 handle, 
+                 handle,
                  FKey (value_list[0], value_list[1].toUShort(), value_list[2].toUShort())
             );
         }
     //qWarning("loaded %d keys", keys.count());
     if (keys.isEmpty()) loadDefaults();
 
 
 
 }
 
 FunctionKeyboard::~FunctionKeyboard() {
 
 }
 
 void FunctionKeyboard::paintEvent(QPaintEvent *e) {
 
     QPainter p(this);
     p.setClipRect(e->rect());
     p.fillRect(0, 0, width(), height(), QColor(255,255,255));
 
     p.setPen(QColor(0,0,0));
 
     /* those decimals do count! becomes short if use plain int */
     for (double i = 0; i <= width(); i += keyWidth) {
 
         p.drawLine((int)i, 0, (int)i, height());
     }
 
     // sometimes the last line doesnt get drawn
     p.drawLine(width() -1, 0, width() -1, height());
 
     for (int i = 0; i <= height(); i += keyHeight) {
 
         p.drawLine(0, i, width(), i);
     }
 
     for (uint r = 0; r < numRows; r++) {
         for (uint c = 0; c < numCols; c++) {
 
             QString handle = "r" + QString::number(r) + "c" + QString::number(c);
             if (keys.contains(handle)) {
 
                 p.drawText(
-                                c * keyWidth + 1, r * keyHeight + 1, 
-                                keyWidth, keyHeight, 
-                                Qt::AlignHCenter | Qt::AlignVCenter, 
+                                c * keyWidth + 1, r * keyHeight + 1,
+                                keyWidth, keyHeight,
+                                Qt::AlignHCenter | Qt::AlignVCenter,
                                 keys[handle].getL()
                 );
             }
         }
     }
 }
 
 void FunctionKeyboard::paintKey(int row, int col) {
 
     QPainter p(this);
-    
-    p.fillRect(QRect(QPoint(col * keyWidth + 1, row * keyHeight + 1), 
-                     QPoint((col + 1) * keyWidth - 1, row * keyHeight + keyHeight- 1)), 
+
+    p.fillRect(QRect(QPoint(col * keyWidth + 1, row * keyHeight + 1),
+                     QPoint((col + 1) * keyWidth - 1, row * keyHeight + keyHeight- 1)),
                (pressedRow != -1 && pressedCol != -1 ) ? QColor(97,119,155) : QColor(255,255,255));
     p.drawText(
-                    col * keyWidth + 1, row * keyHeight + 1, 
-                    keyWidth, keyHeight, 
-                    Qt::AlignHCenter | Qt::AlignVCenter, 
+                    col * keyWidth + 1, row * keyHeight + 1,
+                    keyWidth, keyHeight,
+                    Qt::AlignHCenter | Qt::AlignVCenter,
                     keys["r" + QString::number(row) + "c" + QString::number(col)].getL()
     );
 
 }
 
 void FunctionKeyboard::mousePressEvent(QMouseEvent *e) {
 
     pressedRow = e->y() / keyHeight;
     pressedCol = (int) (e->x() / keyWidth);
 
     paintKey(pressedRow, pressedCol);
 
     // emit that sucker!
     FKey k = keys["r" + QString::number(pressedRow) + "c" + QString::number(pressedCol)];
     emit keyPressed(k.getU(), k.getQ(), 0, 1, 0);
 
 }
 
 void FunctionKeyboard::mouseReleaseEvent(QMouseEvent *) {
 
     if (pressedRow != -1 && pressedRow != -1) {
 
         int row = pressedRow; pressedRow = -1;
         int col = pressedCol; pressedCol = -1;
         paintKey(row, col);
 
         FKey k = keys["r" + QString::number(row) + "c" + QString::number(col)];
         emit keyPressed(k.getU(), k.getQ(), 0, 0, 0);
     }
 
 }
 
 
 void FunctionKeyboard::resizeEvent(QResizeEvent*) {
 
     /* set he default font height/width */
     QFontMetrics fm=fontMetrics();
     keyHeight = fm.lineSpacing() + 2;
     keyWidth = (double)width()/numCols;
 
 }
 
 QSize FunctionKeyboard::sizeHint() const {
 
     return QSize(width(), keyHeight * numRows + 1);
 }
 
 void FunctionKeyboard::loadDefaults() {
 
     /* what keys should be default? */
-    keys.insert( "r0c0", FKey ("F1", 4144, 0)); 
-    keys.insert( "r0c1", FKey ("F2", 4145, 0)); 
-    keys.insert( "r0c2", FKey ("F3", 4145, 0)); 
-    keys.insert( "r0c3", FKey ("F4", 4146, 0)); 
-    keys.insert( "r0c4", FKey ("F5", 4147, 0)); 
-    keys.insert( "r0c5", FKey ("F6", 4148, 0)); 
-    keys.insert( "r0c6", FKey ("F7", 4149, 0)); 
-    keys.insert( "r0c7", FKey ("F8", 4150, 0)); 
-    keys.insert( "r0c8", FKey ("F9", 4151, 0)); 
-    keys.insert( "r0c9", FKey ("F10", 4152, 0)); 
-    keys.insert( "r0c10", FKey ("F11", 4153, 0)); 
-
-    keys.insert( "r1c7", FKey ("Ho", 4112, 0)); 
-    keys.insert( "r1c8", FKey ("End", 4113, 0)); 
-    keys.insert( "r1c9", FKey ("PU", 4118, 0)); 
-    keys.insert( "r1c10", FKey ("PD", 4119, 0)); 
+    keys.insert( "r0c0", FKey ("F1", 4144, 0));
+    keys.insert( "r0c1", FKey ("F2", 4145, 0));
+    keys.insert( "r0c2", FKey ("F3", 4145, 0));
+    keys.insert( "r0c3", FKey ("F4", 4146, 0));
+    keys.insert( "r0c4", FKey ("F5", 4147, 0));
+    keys.insert( "r0c5", FKey ("F6", 4148, 0));
+    keys.insert( "r0c6", FKey ("F7", 4149, 0));
+    keys.insert( "r0c7", FKey ("F8", 4150, 0));
+    keys.insert( "r0c8", FKey ("F9", 4151, 0));
+    keys.insert( "r0c9", FKey ("F10", 4152, 0));
+    keys.insert( "r0c10", FKey ("F11", 4153, 0));
+
+    keys.insert( "r1c7", FKey ("Ho", 4112, 0));
+    keys.insert( "r1c8", FKey ("End", 4113, 0));
+    keys.insert( "r1c9", FKey ("PU", 4118, 0));
+    keys.insert( "r1c10", FKey ("PD", 4119, 0));
 
 }
 
 
-FunctionKeyboardConfig::FunctionKeyboardConfig(const QString& name, QWidget* parent) : 
+FunctionKeyboardConfig::FunctionKeyboardConfig(const QString& name, QWidget* parent) :
     ProfileDialogKeyWidget(name, parent) {
 
 
     FunctionKeyboard *kb = new FunctionKeyboard(this);
     QGroupBox *dimentions = new QGroupBox(2, Qt::Horizontal, tr("Dimentions"), this);
     QGroupBox *editKey = new QGroupBox(2, Qt::Horizontal, tr("Edit"), this);
 
     QVBoxLayout *root = new QVBoxLayout(this, 2);
     root->addWidget(kb);
     root->addWidget(dimentions);
     root->addWidget(editKey);
 }
 FunctionKeyboardConfig::~FunctionKeyboardConfig() {
 
 }
-void FunctionKeyboardConfig::load (const Profile& prof) {
+void FunctionKeyboardConfig::load (const Profile& ) {
 
 }
-void FunctionKeyboardConfig::save (Profile& prof) {
+void FunctionKeyboardConfig::save (Profile& ) {
 
 }
diff --git a/noncore/apps/opie-console/io_modem.cpp b/noncore/apps/opie-console/io_modem.cpp
index f246d81..d4ea0b2 100644
--- a/noncore/apps/opie-console/io_modem.cpp
+++ b/noncore/apps/opie-console/io_modem.cpp
@@ -1,89 +1,91 @@
 
 #include "io_modem.h"
 
 #include "dialer.h"
 
 IOModem::IOModem( const Profile &profile )
         : IOSerial( profile ) {
         m_profile = profile;
 }
 
 
 IOModem::~IOModem() {
 
 }
 
 
 void IOModem::close() {
         // Hangup, discarding result
         int fd = rawIO();
         Dialer d(m_profile, fd);
         d.setHangupOnly();
         d.exec();
         closeRawIO(fd);
 
     IOSerial::close();
 }
 
 bool IOModem::open() {
     bool ret = IOSerial::open();
         if(!ret) return false;
 
         int fd = rawIO();
         Dialer d(m_profile, fd);
 
         int result = d.exec();
         closeRawIO(fd);
         if(result == QDialog::Accepted)
         {
                 return true;
         }
         else
         {
                 close();
                 return false;
         }
 }
 
 void IOModem::reload( const Profile &config ) {
 
     m_device = config.readEntry("Device", MODEM_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", MODEM_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", MODEM_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", MODEM_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", MODEM_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", MODEM_DEFAULT_FLOW);
 
     m_initString = config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING );
     m_resetString = config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING );
     m_dialPref1 = config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf1 = config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref2 = config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf2 = config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref3 = config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf3 = config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_connect = config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING );
     m_hangup = config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING );
     m_cancel = config.readEntry("CancelString", MODEM_DEFAULT_CANCEL_STRING );
     m_dialTime = config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME );
     m_delayRedial = config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL );
     m_numberTries = config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES );
     m_dtrDropTime = config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME );
     m_bpsDetect = config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT );
     m_dcdLines = config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES );
     m_multiLineUntag = config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG );
 }
 
 
 QString IOModem::identifier() const {
     return "modem";
 }
 
 QString IOModem::name() const {
     return "Modem IO Layer";
 }
 
 void IOModem::slotExited(OProcess* proc ){
     close();
+    /* delete it afterwards */
+    delete proc;
 }
 
diff --git a/noncore/apps/opie-console/iolayerbase.cpp b/noncore/apps/opie-console/iolayerbase.cpp
index b0df02d..47f9e76 100644
--- a/noncore/apps/opie-console/iolayerbase.cpp
+++ b/noncore/apps/opie-console/iolayerbase.cpp
@@ -1,167 +1,169 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qbuttongroup.h>
 #include <qhbuttongroup.h>
 #include <qradiobutton.h>
 
 #include "iolayerbase.h"
 
 namespace {
     enum ParityIds {
         id_parity_none,
         id_parity_odd,
         id_parity_even
     };
 
     enum FlowIds {
         id_flow_hw,
         id_flow_sw,
         id_flow_none,
     };
 
     enum SpeedIds {
         id_baud_115200,
         id_baud_57600,
         id_baud_38400,
         id_baud_19200,
         id_baud_9600
     };
 
 }
 
 
 IOLayerBase::IOLayerBase( QWidget* par,  const char* name )
     : QWidget( par, name )
 {
     m_speedLabel = new QLabel(tr("Speed"), this );
     m_speedBox = new QComboBox(this );
 
     m_groupFlow = new QButtonGroup(tr("Flow control"),this );
     m_flowHw = new QRadioButton(tr("Hardware"), m_groupFlow );
     m_flowSw = new QRadioButton(tr("Software"), m_groupFlow );
     m_flowNone = new QRadioButton( tr("None"), m_groupFlow );
 
     m_groupParity = new QButtonGroup(tr("Parity"), this );
     m_parityNone = new QRadioButton(tr("None"), m_groupParity );
     m_parityOdd = new QRadioButton(tr("Odd"), m_groupParity );
     m_parityEven = new QRadioButton(tr("Even"), m_groupParity );
 
     m_lroot = new QVBoxLayout( this );
     m_lroot->add(m_speedLabel );
     m_lroot->add(m_speedBox );
     m_lroot->setStretchFactor(m_speedLabel, 1);
     m_lroot->setStretchFactor(m_speedBox, 1 );
 
     m_hbox = new QHBoxLayout(m_groupFlow, 2 );
     m_hbox->add(m_flowHw );
     m_hbox->add(m_flowSw );
     m_hbox->add(m_flowNone );
     m_lroot->add(m_groupFlow );
     m_lroot->setStretchFactor(m_groupFlow, 2 );
 
     m_hboxPar = new QHBoxLayout( m_groupParity, 2 );
     m_hboxPar->add(m_parityOdd );
     m_hboxPar->add(m_parityEven );
     m_hboxPar->add(m_parityNone );
     m_lroot->add(m_groupParity );
     m_lroot->setStretchFactor(m_groupParity, 2 );
     m_lroot->addStretch(2);
 
     // profiles
     m_speedBox->insertItem(tr("115200 baud"), id_baud_115200 );
     m_speedBox->insertItem(tr("57600 baud"), id_baud_57600   );
     m_speedBox->insertItem(tr("38400 baud"), id_baud_38400   );
     m_speedBox->insertItem(tr("19200 baud"), id_baud_19200   );
     m_speedBox->insertItem(tr("9600 baud"), id_baud_9600     );
 
 };
 IOLayerBase::~IOLayerBase() {
 
 }
 void IOLayerBase::setFlow( Flow flo ) {
     switch ( flo ) {
     case Software:
         m_flowSw->setChecked( true );
         break;
     case Hardware:
         m_flowHw->setChecked( true );
         break;
     case None:
         m_flowNone->setChecked( true );
         break;
     }
 }
 
 void IOLayerBase::setParity( Parity par ) {
     switch( par ) {
     case NonePar:
         m_parityNone->setChecked( true );
         break;
     case Odd:
         m_parityOdd->setChecked( true );
         break;
     case Even:
         m_parityEven->setChecked( true );
         break;
     }
 }
 void IOLayerBase::setSpeed( Speed sp ) {
-    int index;
+    int index = -1;
     switch( sp ) {
     case Baud_115200:
         index = id_baud_115200;
         break;
     case Baud_57600:
         index = id_baud_57600;
         break;
     case Baud_38400:
         index = id_baud_38400;
         break;
     case Baud_19200:
         index = id_baud_19200;
         break;
+    default:
     case Baud_9600:
         index = id_baud_9600;
         break;
     }
     m_speedBox->setCurrentItem(index );
 }
 IOLayerBase::Flow IOLayerBase::flow()const {
     if (m_flowHw->isChecked() ) {
         return Hardware;
     }else if( m_flowSw->isChecked() ) {
         return Software;
     } else {
         return None;
     }
 }
 IOLayerBase::Parity IOLayerBase::parity()const {
     if ( m_parityOdd->isChecked() ) {
         return Odd;
     } else if  ( m_parityEven->isChecked() ) {
         return Even;
     } else {
         return NonePar;
     }
 
 }
 IOLayerBase::Speed IOLayerBase::speed()const{
     switch( m_speedBox->currentItem() ) {
     case id_baud_115200:
         return Baud_115200;
         break;
     case id_baud_57600:
         return Baud_57600;
         break;
     case id_baud_38400:
         return Baud_38400;
         break;
     case id_baud_19200:
         return Baud_19200;
         break;
+    default:
     case id_baud_9600:
         return Baud_9600;
         break;
     }
 }
diff --git a/noncore/apps/opie-console/irdaconfigwidget.cpp b/noncore/apps/opie-console/irdaconfigwidget.cpp
index 72e99a1..059530d 100644
--- a/noncore/apps/opie-console/irdaconfigwidget.cpp
+++ b/noncore/apps/opie-console/irdaconfigwidget.cpp
@@ -1,146 +1,148 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 
 #include "iolayerbase.h"
 #include "irdaconfigwidget.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
-        for (uint i = 0; i < bo->count(); i++ ) {
+        for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 
 
 }
 
 IrdaConfigWidget::IrdaConfigWidget( const QString& name,
                                         QWidget* parent,
                                         const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout(this );
     m_device = new QLabel(tr("Device"), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     m_base = new IOLayerBase(this, "base");
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ircomm0" );
     m_deviceCmb->insertItem( "/dev/ircomm1" );
 }
 
 IrdaConfigWidget::~IrdaConfigWidget() {
 
 }
 void IrdaConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else {
          m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void IrdaConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
+    flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
+    default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
 }
diff --git a/noncore/apps/opie-console/main.cpp b/noncore/apps/opie-console/main.cpp
index 78a91a2..7f9f038 100644
--- a/noncore/apps/opie-console/main.cpp
+++ b/noncore/apps/opie-console/main.cpp
@@ -1,113 +1,114 @@
 #include <sys/types.h>
 
 #include <stdio.h>
 #include <stdlib.h>
 #include <signal.h>
 
 #include <qfile.h>
 
 #include <qpe/qpeapplication.h>
 
 #include "mainwindow.h"
 
 //#define FSCKED_DISTRIBUTION 1
 #ifdef FSCKED_DISTRIBUTION
 /*
  * The Zaurus rom
  */
 class FixIt {
 public:
     FixIt();
     ~FixIt();
     void fixIt();
     /* no real interested in implementing it */
     void breakIt() {
 
     };
     char* m_file;
 };
 
 FixIt::FixIt() {
     /* the new inittab */
     m_file = "#\n# /etc/inittab
 #
 
 #   0 - halt (Do NOT set initdefault to this)
 #   1 - Single user mode
 #   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
 #   3 - Full multiuser mode
 #   4 - JavaVM(Intent) developer mode
 #   5 - JavaVM(Intent)
 #   6 - reboot (Do NOT set initdefault to this)
 #
 id:5:initdefault:
 
 # Specify things to do when starting
 si::sysinit:/etc/rc.d/rc.sysinit
 
 l0:0:wait:/root/etc/rc.d/rc 0
 l1:1:wait:/etc/rc.d/rc 1
 l2:2:wait:/etc/rc.d/rc 2
 l3:3:wait:/etc/rc.d/rc 3
 l4:4:wait:/etc/rc.d/rc 4
 l5:5:wait:/etc/rc.d/rc 5
 l6:6:wait:/root/etc/rc.d/rc 6
 
 # Specify things to do before rebooting
 um::ctrlaltdel:/bin/umount -a -r > /dev/null 2>&1
 sw::ctrlaltdel:/sbin/swapoff -a > /dev/null 2>&1
 
 # Specify program to run on ttyS0
 s0:24:respawn:/sbin/getty 9600 ttyS0
 #pd:5:respawn:/etc/sync/serialctl
 
 # Specify program to run on tty1
 1:2:respawn:/sbin/getty 9600 tty1
 ln:345:respawn:survive -l 6 /sbin/launch
 #qt:5:respawn:/sbin/qt
 
 # collie sp.
 sy::respawn:/sbin/shsync\n";
 
 
 }
 FixIt::~FixIt() {
 }
 /*
  * the retail Zaurus is broken in many ways
  * one is that pppd is listening on our port...
  * we've to stop it from that and then do kill(SIGHUP,1);
  */
 void FixIt::fixIt() {
     ::rename("/etc/inittab", QPEApplication::qpeDir() + "/etc/inittab" );
     QFile file( "/etc/inittab" );
     if ( file.open(IO_WriteOnly | IO_Raw ) ) {
         file.writeBlock(m_file,strlen(m_file) );
     }
     file.close();
     ::kill( SIGHUP, 1 );
 }
 #endif
 
 
 int main(int argc, char **argv) {
+    argv[0]="embeddedkonsole";
     QPEApplication app( argc, argv );
 
 #ifdef   FSCKED_DISTRIBUTION
     qWarning("fscked");
     FixIt it;
     it.fixIt();
 #endif
 
     MainWindow mw;
     mw.setCaption(QObject::tr("Opie console") );
     app.showMainWidget( &mw );
 
     int ap = app.exec();
 
 #ifdef FSCKED_DISTRIBUTION
     /* should add a signal  handler too */
     it.breakIt();
 #endif
     return ap;
 }
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index d3a23fa..c37fafd 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -1,200 +1,201 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qhbox.h>
 #include <qregexp.h>
 
 #include "modemconfigwidget.h"
 #include "dialdialog.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
-        for (uint i = 0; i < bo->count(); i++ ) {
+        for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
     m_device = new QLabel(tr( "Modem is attached to:" ), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel* telLabel = new QLabel( this );
     telLabel->setText( tr( "Enter telefon number here:" ) );
     m_telNumber = new QLineEdit( this );
     QHBox *buttonBox = new QHBox( this );
     QPushButton *atButton = new QPushButton( buttonBox );
     atButton->setText( tr( "AT commands" ) );
     connect( atButton, SIGNAL( clicked() ), this, SLOT( slotAT() ) );
 
     QPushButton *dialButton = new QPushButton( buttonBox );
     dialButton->setText( tr( "Enter number" ) );
     connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) );
 
 
     m_base = new IOLayerBase( this, "base" );
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( telLabel );
     m_lay->addWidget( m_telNumber );
     m_lay->addWidget( buttonBox );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttyS2" );
 
     atConf = new  ATConfigDialog( this, "ATConfig", true );
 }
 
 ModemConfigWidget::~ModemConfigWidget() {
 
 }
 void ModemConfigWidget::load( const Profile& prof ) {
 
     int rad_flow = prof.readNumEntry( "Flow" );
     int rad_parity = prof.readNumEntry( "Parity" );
     int speed = prof.readNumEntry( "Speed" );
     QString number = prof.readEntry( "Number" );
 
     if ( !number.isEmpty() ) {
         m_telNumber->setText( number );
     }
 
     if ( rad_flow == 1 ) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else if (rad_flow == 0) {
          m_base->setFlow( IOLayerBase::None );
     }
 
 
     if ( rad_parity == 1 ) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ){
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed( IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600 );
         break;
     case 38400:
         m_base->setSpeed( IOLayerBase::Baud_38400 );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200 );
         break;
     case 9600:
     default:
         m_base->setSpeed( IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry( "Device" ).isEmpty() ) {
         return;
     }
     setCurrent( prof.readEntry( "Device" ), m_deviceCmb );
 
     atConf->readConfig( prof );
 }
 
 /*
  * save speed,
  * flow,
  * parity
  */
 void ModemConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
+    flow = parity = speed = 0;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry( "Flow", flow );
     prof.writeEntry( "Parity", parity );
     prof.writeEntry( "Speed", speed );
     prof.writeEntry( "Number", m_telNumber->text() );
 
 
     atConf->writeConfig(prof);
 }
 
 void ModemConfigWidget::slotAT() {
     //  ATConfigDialog conf( this, "ATConfig", true );
     atConf->showMaximized();
     if ( atConf->exec() != QDialog::Accepted ) {
         // reload old settings
     }
 }
 
 void ModemConfigWidget::slotDial() {
     DialDialog dial( this, "DialConfig", true );
     if(!m_telNumber->text().isEmpty()) {
         dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ \\.\\,]"), ""));
     }
     dial.showMaximized();
     if ( dial.exec() == QDialog::Accepted ) {
         m_telNumber->setText( dial.number() );
     }
 }
diff --git a/noncore/apps/opie-console/procctl.cpp b/noncore/apps/opie-console/procctl.cpp
index ff6bea8..a44529b 100644
--- a/noncore/apps/opie-console/procctl.cpp
+++ b/noncore/apps/opie-console/procctl.cpp
@@ -1,96 +1,97 @@
 #include <sys/wait.h>
 
 #include <fcntl.h>
 #include <unistd.h>
 
 #include "procctl.h"
 
 ProcContainer *ProcCtl::m_last = 0;
 ProcCtl* ProcCtl::m_self = 0;
 
 ProcCtl::ProcCtl() {
     signal( SIGCHLD, signal_handler );
 }
 ProcCtl::~ProcCtl() {
 }
 ProcCtl* ProcCtl::self() {
     if (!m_self ) {
         m_self = new ProcCtl;
     }
+    return m_self;
 }
 void ProcCtl::add(pid_t pi,  int fd ) {
     ProcContainer * con = new ProcContainer;
     //memset(con, 0, sizeof(con) );
     con->pid = pi;
     con->fd = fd;
     con->status = 0;
     con->prev = m_last;
 
     m_last = con;
 
 }
 void ProcCtl::remove( pid_t pi ) {
     /*
      * We first check if the last item
      * is equal to  pi the we
      *
      */
     ProcContainer* con;
     if (m_last->pid == pi ) {
         con = m_last;
         m_last = con->prev;
         delete con;
         return;
     }
 
     con = m_last;
     ProcContainer* forw = 0l;
     while (con ) {
         /* remove it */
         if ( pi == con->pid ) {
             forw->prev = con->prev;
             delete con;
             return;
         }
 
         forw = con;
         con = con->prev;
     }
 
 }
 void ProcCtl::remove( ProcContainer con ) {
     remove( con.pid );
 }
 int ProcCtl::status(pid_t pid )const{
     ProcContainer *con = m_last;
     while (con) {
         if (con->pid == pid )
             return con->status;
         con = con->prev;
     }
     return -1;
 }
 void ProcCtl::signal_handler(int) {
     int status;
     signal( SIGCHLD,  signal_handler );
     pid_t pi = waitpid( -1, &status, WNOHANG  );
 
     /*
      * find the container for pid
      *
      */
     if ( pi < 0 ) {
         return;
     }
 
     ProcContainer* con = m_last;
     while (con) {
         if ( con->pid == pi ) {
             con->status = status;
             char result = 1;
             /* give a 'signal' */
             ::write(con->fd, &result, 1 );
         }
         con = con->prev;
     }
 }
diff --git a/noncore/apps/opie-console/profileeditordialog.cpp b/noncore/apps/opie-console/profileeditordialog.cpp
index 413e80b..1765d42 100644
--- a/noncore/apps/opie-console/profileeditordialog.cpp
+++ b/noncore/apps/opie-console/profileeditordialog.cpp
@@ -1,215 +1,214 @@
 #include <qlayout.h>
 #include <qlineedit.h>
 #include <qlabel.h>
 #include <qmessagebox.h>
 #include <qstringlist.h>
 #include <qcombobox.h>
 #include <qcheckbox.h>
 
 
 //#include "profileeditorplugins.h"
 #include "metafactory.h"
 #include "profileeditordialog.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
             }
         }
     };
 }
 
 ProfileEditorDialog::ProfileEditorDialog( MetaFactory* fact,
                                           const Profile& prof )
     : QDialog(0, 0, TRUE), m_fact( fact ), m_prof( prof )
 {
     initUI();
 
         // Apply current profile
         // plugin_plugin->load(profile);
         // ... (reset profile name line edit etc.)
 }
 
 ProfileEditorDialog::ProfileEditorDialog( MetaFactory* fact )
     : QDialog(0, 0, TRUE), m_fact( fact )
 {
         // Default profile
         m_prof = Profile("New Profile", "serial", "default", Profile::Black, Profile::White, Profile::VT102);
 
         initUI();
 
         // Apply current profile
         // plugin_plugin->load(profile);
 }
 
 Profile ProfileEditorDialog::profile() const
 {
           return m_prof;
 }
 
 void ProfileEditorDialog::initUI()
 {
     m_con = m_term = m_key = 0l;
 
     QVBoxLayout *mainLayout = new QVBoxLayout( this );
     tabWidget = new OTabWidget( this );
     tabWidget->setTabStyle(OTabWidget::TextTab);
     mainLayout->add(tabWidget);
 
     /* base tabs */
     tabprof   = new QWidget(this);
     m_tabTerm = new QWidget(this);
     m_tabCon  = new QWidget(this);
     m_tabKey  = new QWidget(this);
 
     /* base layout for tabs */
     m_layCon  = new QHBoxLayout( m_tabCon , 2 );
     m_layTerm = new QHBoxLayout( m_tabTerm, 2 );
     m_layKey = new QHBoxLayout( m_tabKey, 2 );
 
     // profile tab
 
     QLabel *name = new QLabel(QObject::tr("Profile name"), tabprof);
     m_name = new QLineEdit(tabprof);
     QLabel *con = new QLabel(tr("Connection"), tabprof );
     QLabel *term = new QLabel(tr("Terminal"), tabprof );
     m_conCmb = new QComboBox( tabprof );
     m_termCmb = new QComboBox( tabprof );
     m_autoConnect = new QCheckBox(tr("Auto connect after load"), tabprof);
 
     // layouting
     QVBoxLayout *vbox3 = new QVBoxLayout(tabprof, 2);
     vbox3->add(name);
     vbox3->add(m_name);
     vbox3->add(con );
     vbox3->add(m_conCmb );
     vbox3->add(term );
     vbox3->add(m_termCmb );
     vbox3->add(m_autoConnect);
     vbox3->addStretch(1);
 
     m_showconntab = 0;
     tabWidget->addTab(tabprof, "", QObject::tr("Profile"));
-    //tabWidget->addTab(m_tabCon, "", QObject::tr("Connection"));
+    tabWidget->addTab(m_tabCon, "", QObject::tr("Connection"));
     tabWidget->addTab(m_tabTerm, "", QObject::tr("Terminal"));
     tabWidget->addTab(m_tabKey, "", QObject::tr("Special Keys"));
     tabWidget->setCurrentTab( tabprof );
 
 
     // fill the comboboxes
     QStringList list = m_fact->connectionWidgets();
     QStringList::Iterator it;
     for (it =list.begin(); it != list.end(); ++it ) {
         m_conCmb->insertItem( (*it) );
     }
     list = m_fact->terminalWidgets();
     for (it =list.begin(); it != list.end(); ++it ) {
         m_termCmb->insertItem( (*it) );
     }
 
     // load profile values
     m_name->setText(m_prof.name());
     slotConActivated(  m_fact->external(m_prof.ioLayerName()  ) );
     slotTermActivated( m_fact->external(m_prof.terminalName() ) );
     slotKeyActivated( "Default Keyboard" );
     setCurrent( m_fact->external(m_prof.ioLayerName() ), m_conCmb );
     setCurrent( m_fact->external(m_prof.terminalName() ), m_termCmb );
     m_autoConnect->setChecked(m_prof.autoConnect());
 
 
     // signal and slots
     connect(m_conCmb, SIGNAL(activated(const QString& ) ),
             this, SLOT(slotConActivated(const QString&) ) );
     connect(m_termCmb, SIGNAL(activated(const QString& ) ),
             this, SLOT(slotTermActivated(const QString& ) ) );
 
 }
 
 ProfileEditorDialog::~ProfileEditorDialog() {
 
 }
 void ProfileEditorDialog::accept()
 {
         if(profName().isEmpty())
         {
                 QMessageBox::information(this,
                         QObject::tr("Invalid profile"),
                         QObject::tr("Please enter a profile name."));
                 return;
         }
         // Save profile and plugin profile
         //if(plugin_plugin) plugin_plugin->save();
 
         // Save general values
         m_prof.setName(profName());
         m_prof.setIOLayer(      m_fact->internal(m_conCmb ->currentText()  ) );
         m_prof.setTerminalName( m_fact->internal(m_termCmb->currentText()  ) );
     m_prof.setAutoConnect( m_autoConnect->isChecked() );
 
         if (m_con )
             m_con->save( m_prof );
         if (m_term )
             m_term->save( m_prof );
         if (m_key)
             m_key->save( m_prof );
 
         QDialog::accept();
 }
 
 
 QString ProfileEditorDialog::profName()const
 {
         return m_name->text();
 }
 
 QCString ProfileEditorDialog::profType()const
 {
     /*QStringList w = m_fact->configWidgets();
         for(QStringList::Iterator it = w.begin(); it != w.end(); it++)
                 if(device_box->currentText() == m_fact->name((*it))) return (*it);
     */
     return QCString();
 }
 /*
  * we need to switch the widget
  */
 void ProfileEditorDialog::slotConActivated( const QString& str ) {
     delete m_con;
     m_con = m_fact->newConnectionPlugin( str, m_tabCon );
 
     if ( !m_con ) {
         m_con = new NoOptions( str, m_tabCon, "name");
     }
     m_con->load( m_prof );
     m_layCon->addWidget( m_con );
 
-    tabWidget->addTab( m_tabCon, "", QObject::tr("Connection") );
     tabWidget->setCurrentTab( tabprof );
 
 }
 /*
  * we need to switch the widget
  */
 void ProfileEditorDialog::slotTermActivated( const QString& str ) {
     delete m_term;
     m_term = m_fact->newTerminalPlugin( str, m_tabTerm );
 
     if (m_term) {
         m_term->load(m_prof );
         m_layTerm->addWidget( m_term );
     }
 }
 
 void ProfileEditorDialog::slotKeyActivated(const QString &str) {
     delete m_key;
     m_key = m_fact->newKeyboardPlugin( str, m_tabKey );
 
     if (m_key) {
 
         m_key->load(m_prof);
         m_layKey->addWidget(m_key);
     }
 
 }
diff --git a/noncore/apps/opie-console/serialconfigwidget.cpp b/noncore/apps/opie-console/serialconfigwidget.cpp
index bd0312a..5c6d975 100644
--- a/noncore/apps/opie-console/serialconfigwidget.cpp
+++ b/noncore/apps/opie-console/serialconfigwidget.cpp
@@ -1,149 +1,149 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 
 #include "iolayerbase.h"
 #include "serialconfigwidget.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
-        for (uint i = 0; i < bo->count(); i++ ) {
+        for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 
 
 }
 
 SerialConfigWidget::SerialConfigWidget( const QString& name,
                                         QWidget* parent,
                                         const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout(this );
     m_device = new QLabel(tr("Device"), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     m_base = new IOLayerBase(this, "base");
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttySA0");
     m_deviceCmb->insertItem( "/dev/ttySA1");
 
 }
 SerialConfigWidget::~SerialConfigWidget() {
 
 }
 void SerialConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else {
         m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void SerialConfigWidget::save( Profile& prof ) {
     int flow, parity, speed ;
     flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
 }
diff --git a/noncore/apps/opie-console/transferdialog.cpp b/noncore/apps/opie-console/transferdialog.cpp
index f89723c..75c4c72 100644
--- a/noncore/apps/opie-console/transferdialog.cpp
+++ b/noncore/apps/opie-console/transferdialog.cpp
@@ -1,266 +1,266 @@
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qlabel.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qmessagebox.h>
 #include <qprogressbar.h>
 #include <qradiobutton.h>
 #include <qbuttongroup.h>
 
 #include <opie/ofiledialog.h>
 
 #include "file_layer.h"
 #include "receive_layer.h"
 #include "metafactory.h"
 #include "mainwindow.h"
 
 #include "transferdialog.h"
 
-TransferDialog::TransferDialog(QWidget *parent, MainWindow *mainwindow, const char *name)
+TransferDialog::TransferDialog(QWidget *parent, MainWindow *mainwindow, const char *)
 : QDialog(parent, 0l, true), m_win(mainwindow)
 {
     m_lay = 0l;
         m_recvlay = 0l;
         QVBoxLayout *vbox, *vbox2;
         QHBoxLayout *hbox, *hbox2, *hbox3;
         QLabel *file, *mode, *progress, *status;
         QButtonGroup *group;
         QRadioButton *mode_send, *mode_receive;
 
         m_autocleanup = 0;
 
         group = new QButtonGroup(QObject::tr("Transfer mode"), this);
         mode_send = new QRadioButton(QObject::tr("Send"), group);
         mode_receive = new QRadioButton(QObject::tr("Receive"), group);
         group->insert(mode_send, id_send);
         group->insert(mode_receive, id_receive);
         vbox2 = new QVBoxLayout(group, 2);
         vbox2->addSpacing(10);
         hbox3 = new QHBoxLayout(vbox2, 2);
         hbox3->add(mode_send);
         hbox3->add(mode_receive);
         mode_send->setChecked(true);
         m_transfermode = id_send;
 
         file = new QLabel(QObject::tr("Send file"), this);
         mode = new QLabel(QObject::tr("Transfer protocol"), this);
         progress = new QLabel(QObject::tr("Progress"), this);
         status = new QLabel(QObject::tr("Status"), this);
 
         statusbar = new QLabel(QObject::tr("Ready"), this);
         statusbar->setFrameStyle(QFrame::Panel | QFrame::Sunken);
 
         protocol = new QComboBox(this);
         QStringList list = m_win->factory()->fileTransferLayers();
         for (QStringList::Iterator it = list.begin(); it != list.end(); ++it)
                 protocol->insertItem((*it));
 
         filename = new QLineEdit(this);
 
         progressbar = new QProgressBar(this);
         progressbar->setProgress(0);
 
         selector = new QPushButton("...", this);
         ok = new QPushButton(QObject::tr("Start transfer"), this);
         cancel = new QPushButton(QObject::tr("Cancel"), this);
 
         vbox = new QVBoxLayout(this, 2);
         vbox->add(group);
         vbox->add(file);
         hbox = new QHBoxLayout(vbox, 0);
         hbox->add(filename);
         hbox->add(selector);
         vbox->add(mode);
         vbox->add(protocol);
         vbox->add(progress);
         vbox->add(progressbar);
         vbox->add(status);
         vbox->add(statusbar);
         vbox->addStretch(1);
         hbox2 = new QHBoxLayout(vbox, 2);
         hbox2->add(ok);
         hbox2->add(cancel);
 
         setCaption(QObject::tr("File transfer"));
         show();
 
         connect(selector, SIGNAL(clicked()), SLOT(slotFilename()));
         connect(ok, SIGNAL(clicked()), SLOT(slotTransfer()));
         connect(cancel, SIGNAL(clicked()), SLOT(slotCancel()));
         connect(group, SIGNAL(clicked(int)), SLOT(slotMode(int)));
 }
 
 TransferDialog::~TransferDialog()
 {
 }
 
 void TransferDialog::slotFilename()
 {
         QString f;
 
         f = OFileDialog::getOpenFileName(0);
         if(!f.isNull()) filename->setText(f);
 }
 
 void TransferDialog::slotTransfer()
 {
         if((m_transfermode == id_send) && (filename->text().isEmpty()))
         {
                 QMessageBox::information(this,
                         QObject::tr("Attention"),
                         QObject::tr("No file has been specified."));
                 return;
         }
 
         ok->setEnabled(false);
 
         cleanup();
         m_autocleanup = 0;
 
         if(m_transfermode == id_send) statusbar->setText(QObject::tr("Sending..."));
         else statusbar->setText(QObject::tr("Receiving..."));
 
         if(m_transfermode == id_send)
         {
                 m_lay = m_win->factory()->newFileTransfer(protocol->currentText(), m_win->currentSession()->layer());
                 m_lay->sendFile(filename->text());
 
                 connect(m_lay, SIGNAL(progress(const QString&, int, int, int, int, int)),
                         SLOT(slotProgress(const QString&, int, int, int, int, int)));
                 connect(m_lay, SIGNAL(error(int, const QString&)), SLOT(slotError(int, const QString&)));
                 connect(m_lay, SIGNAL(sent()), SLOT(slotSent()));
         }
         else
         {
                 m_recvlay = m_win->factory()->newReceive(protocol->currentText(), m_win->currentSession()->layer());
                 m_recvlay->receive();
 
                 connect(m_recvlay, SIGNAL(progress(const QString&, int, int, int, int, int)),
                         SLOT(slotProgress(const QString&, int, int, int, int, int)));
                 connect(m_recvlay, SIGNAL(error(int, const QString&)), SLOT(slotError(int, const QString&)));
                 connect(m_recvlay, SIGNAL(received(const QString&)), SLOT(slotReceived(const QString&)));
         }
 }
 
 void TransferDialog::cleanup()
 {
         if(m_lay)
         {
                 m_lay->cancel();
                 delete m_lay;
                 m_lay = 0l;
         }
         if(m_recvlay)
         {
                 m_recvlay->cancel();
                 delete m_recvlay;
                 m_recvlay = 0l;
         }
 }
 
 void TransferDialog::slotCancel()
 {
         ok->setEnabled(true);
         statusbar->setText(QObject::tr("Ready"));
 
         if((m_lay) || (m_recvlay))
         {
                 cleanup();
                 if(m_autocleanup) close();
                 else
                 {
                         QMessageBox::information(this,
                                 QObject::tr("Cancelled"),
                                 QObject::tr("The file transfer has been cancelled."));
                 }
         }
         else
         {
                 close();
         }
 }
 
-void TransferDialog::slotProgress(const QString& file, int progress, int speed, int hours, int minutes, int seconds)
+void TransferDialog::slotProgress(const QString& , int progress, int , int , int, int )
 {
         progressbar->setProgress(progress);
 }
 
-void TransferDialog::slotError(int error, const QString& message)
+void TransferDialog::slotError(int error, const QString& )
 {
         statusbar->setText(QObject::tr("Ready"));
 
         switch(error)
         {
                         case FileTransferLayer::NotSupported:
                                 QMessageBox::critical(this,
                                         QObject::tr("Error"),
                                         QObject::tr("Operation not supported."));
                                 break;
                         case FileTransferLayer::StartError:
                                 QMessageBox::critical(this,
                                         QObject::tr("Error"),
                                         QObject::tr("Transfer could not be started."));
                                 break;
                         case FileTransferLayer::NoError:
                                 QMessageBox::critical(this,
                                         QObject::tr("Error"),
                                         QObject::tr("No error."));
                                 break;
                         case FileTransferLayer::Undefined:
                                 QMessageBox::critical(this,
                                         QObject::tr("Error"),
                                         QObject::tr("Undefined error occured."));
                                 break;
                         case FileTransferLayer::Incomplete:
                                 QMessageBox::critical(this,
                                         QObject::tr("Error"),
                                         QObject::tr("Incomplete transfer."));
                                 break;
                         case FileTransferLayer::Unknown:
                         default:
                                 QMessageBox::critical(this,
                                         QObject::tr("Error"),
                                         QObject::tr("Unknown error occured."));
                                 break;
         }
 
         m_autocleanup = 1;
 }
 
 void TransferDialog::slotSent()
 {
         progressbar->setProgress(100);
         QMessageBox::information(this, QObject::tr("Sent"), QObject::tr("File has been sent."));
         ok->setEnabled(true);
         progressbar->setProgress(0);
         statusbar->setText(QObject::tr("Ready"));
         m_autocleanup = 1;
 }
 
-void TransferDialog::slotReceived(const QString& file)
+void TransferDialog::slotReceived(const QString& )
 {
         progressbar->setProgress(100);
         QMessageBox::information(this, QObject::tr("Received"), QObject::tr("File has been received."));
         //QMessageBox::information(this, QObject::tr("Sent"), QObject::tr("File has been received as %1.").arg(file));
         ok->setEnabled(true);
         progressbar->setProgress(0);
         statusbar->setText(QObject::tr("Ready"));
         m_autocleanup = 1;
 }
 
 void TransferDialog::slotMode(int id)
 {
         if(id == id_send)
         {
                 selector->setEnabled(true);
                 filename->setEnabled(true);
         }
         else
         {
                 selector->setEnabled(false);
                 filename->setEnabled(false);
         }
         m_transfermode = id;
 }