summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--core/launcher/desktop.cpp4
-rw-r--r--core/launcher/launcher.pro2
-rw-r--r--core/launcher/qcopbridge.cpp100
-rw-r--r--core/launcher/qcopbridge.h7
-rw-r--r--core/launcher/transferserver.cpp207
-rw-r--r--core/launcher/transferserver.h23
6 files changed, 227 insertions, 116 deletions
diff --git a/core/launcher/desktop.cpp b/core/launcher/desktop.cpp
index 24dce73..541b4be 100644
--- a/core/launcher/desktop.cpp
+++ b/core/launcher/desktop.cpp
@@ -377,386 +377,386 @@ Desktop::Desktop() :
packageSlave = new PackageSlave( this );
connect(qApp, SIGNAL(volumeChanged(bool)), this, SLOT(rereadVolumes()));
qApp->installEventFilter( this );
}
void Desktop::show()
{
login(TRUE);
QWidget::show();
}
Desktop::~Desktop()
{
delete launcher;
delete tb;
delete qcopBridge;
delete transferServer;
}
bool Desktop::recoverMemory()
{
return tb->recoverMemory();
}
void Desktop::checkMemory()
{
#if defined(QPE_HAVE_MEMALERTER)
static bool ignoreNormal=FALSE;
static bool existingMessage=FALSE;
if(existingMessage)
return; // don't show a second message while still on first
existingMessage = TRUE;
switch ( memstate ) {
case Unknown:
break;
case Low:
memstate = Unknown;
if ( recoverMemory() )
ignoreNormal = TRUE;
else
QMessageBox::warning( 0 , "Memory Status",
"The memory smacks of shortage. \n"
"Please save data. " );
break;
case Normal:
memstate = Unknown;
if ( ignoreNormal )
ignoreNormal = FALSE;
else
QMessageBox::information ( 0 , "Memory Status",
"There is enough memory again." );
break;
case VeryLow:
memstate = Unknown;
QMessageBox::critical( 0 , "Memory Status",
"The memory is very low. \n"
"Please end this application \n"
"immediately." );
recoverMemory();
}
existingMessage = FALSE;
#endif
}
static bool isVisibleWindow(int wid)
{
const QList<QWSWindow> &list = qwsServer->clientWindows();
QWSWindow* w;
for (QListIterator<QWSWindow> it(list); (w=it.current()); ++it) {
if ( w->winId() == wid )
return !w->isFullyObscured();
}
return FALSE;
}
static bool hasVisibleWindow(const QString& clientname)
{
const QList<QWSWindow> &list = qwsServer->clientWindows();
QWSWindow* w;
for (QListIterator<QWSWindow> it(list); (w=it.current()); ++it) {
if ( w->client()->identity() == clientname && !w->isFullyObscured() )
return TRUE;
}
return FALSE;
}
void Desktop::raiseLauncher()
{
Config cfg("qpe"); //F12 'Home'
cfg.setGroup("AppsKey");
QString tempItem;
tempItem = cfg.readEntry("Middle","Home");
if(tempItem == "Home" || tempItem.isEmpty()) {
if ( isVisibleWindow(launcher->winId()) )
launcher->nextView();
else
launcher->raise();
} else {
QCopEnvelope e("QPE/System","execute(QString)");
e << tempItem;
}
}
void Desktop::executeOrModify(const QString& appLnkFile)
{
AppLnk lnk(MimeType::appsFolderName() + "/" + appLnkFile);
if ( lnk.isValid() ) {
QCString app = lnk.exec().utf8();
Global::terminateBuiltin("calibrate");
if ( QCopChannel::isRegistered("QPE/Application/" + app) ) {
MRUList::addTask(&lnk);
if ( hasVisibleWindow(app) )
QCopChannel::send("QPE/Application/" + app, "nextView()");
else
QCopChannel::send("QPE/Application/" + app, "raise()");
} else {
lnk.execute();
}
}
}
void Desktop::raiseDatebook()
{
Config cfg("qpe"); //F9 'Activity'
cfg.setGroup("AppsKey");
QString tempItem;
tempItem = cfg.readEntry("LeftEnd","Calender");
if(tempItem == "Calender" || tempItem.isEmpty()) executeOrModify("Applications/datebook.desktop");
else {
QCopEnvelope e("QPE/System","execute(QString)");
e << tempItem;
}
}
void Desktop::raiseContacts()
{
Config cfg("qpe"); //F10, 'Contacts'
cfg.setGroup("AppsKey");
QString tempItem;
tempItem = cfg.readEntry("Left2nd","Address Book");
if(tempItem == "Address Book" || tempItem.isEmpty()) executeOrModify("Applications/addressbook.desktop");
else {
QCopEnvelope e("QPE/System","execute(QString)");
e << tempItem;
}
}
void Desktop::raiseMenu()
{
Config cfg("qpe"); //F11, 'Menu'
cfg.setGroup("AppsKey");
QString tempItem;
tempItem = cfg.readEntry("Right2nd","Popup Menu");
if(tempItem == "Popup Menu" || tempItem.isEmpty()) {
Global::terminateBuiltin("calibrate");
tb->startMenu()->launch();
} else {
QCopEnvelope e("QPE/System","execute(QString)");
e << tempItem;
}
}
void Desktop::raiseEmail()
{
Config cfg("qpe"); //F13, 'Mail'
cfg.setGroup("AppsKey");
QString tempItem;
tempItem = cfg.readEntry("RightEnd","Mail");
if(tempItem == "Mail" || tempItem == "qtmail" || tempItem.isEmpty()) executeOrModify("Applications/qtmail.desktop");
else {
QCopEnvelope e("QPE/System","execute(QString)");
e << tempItem;
}
}
// autoStarts apps on resume and start
void Desktop::execAutoStart() {
QString appName;
int delay;
QDateTime now = QDateTime::currentDateTime();
Config cfg( "autostart" );
cfg.setGroup( "AutoStart" );
appName = cfg.readEntry("Apps", "");
delay = (cfg.readEntry("Delay", "0" )).toInt();
// If the time between suspend and resume was longer then the
// value saved as delay, start the app
if ( suspendTime.secsTo(now) >= (delay*60) ) {
QCopEnvelope e("QPE/System", "execute(QString)");
e << QString(appName);
- } else {
- }
+ } //else {
+ //}
}
#if defined(QPE_HAVE_TOGGLELIGHT)
#include <qpe/config.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <linux/ioctl.h>
#include <time.h>
#endif
static bool blanked=FALSE;
static void blankScreen()
{
if ( !qt_screen ) return;
/* Should use a big black window instead.
QGfx* g = qt_screen->screenGfx();
g->fillRect(0,0,qt_screen->width(),qt_screen->height());
delete g;
*/
blanked = TRUE;
}
static void darkScreen()
{
extern void qpe_setBacklight(int);
qpe_setBacklight(0); // force off
}
void Desktop::togglePower()
{
bool wasloggedin = loggedin;
loggedin=0;
suspendTime = QDateTime::currentDateTime();
darkScreen();
if ( wasloggedin )
blankScreen();
system("apm --suspend");
QWSServer::screenSaverActivate( FALSE );
{
QCopEnvelope("QPE/Card", "mtabChanged()" ); // might have changed while asleep
QCopEnvelope e("QPE/System", "setBacklight(int)");
e << -3; // Force on
}
if ( wasloggedin ) {
login(TRUE);
}
sleep(1);
execAutoStart();
//qcopBridge->closeOpenConnections();
//qDebug("called togglePower()!!!!!!");
}
void Desktop::toggleLight()
{
QCopEnvelope e("QPE/System", "setBacklight(int)");
e << -2; // toggle
}
void Desktop::toggleSymbolInput()
{
tb->toggleSymbolInput();
}
void Desktop::toggleNumLockState()
{
tb->toggleNumLockState();
}
void Desktop::toggleCapsLockState()
{
tb->toggleCapsLockState();
}
void Desktop::styleChange( QStyle &s )
{
QWidget::styleChange( s );
int displayw = qApp->desktop()->width();
int displayh = qApp->desktop()->height();
QSize sz = tb->sizeHint();
tb->setGeometry( 0, displayh-sz.height(), displayw, sz.height() );
}
void DesktopApplication::shutdown()
{
if ( type() != GuiServer )
return;
ShutdownImpl *sd = new ShutdownImpl( 0, 0, WDestructiveClose );
connect( sd, SIGNAL(shutdown(ShutdownImpl::Type)),
this, SLOT(shutdown(ShutdownImpl::Type)) );
sd->showMaximized();
}
void DesktopApplication::shutdown( ShutdownImpl::Type t )
{
switch ( t ) {
case ShutdownImpl::ShutdownSystem:
execlp("shutdown", "shutdown", "-h", "now", (void*)0);
break;
case ShutdownImpl::RebootSystem:
execlp("shutdown", "shutdown", "-r", "now", (void*)0);
break;
case ShutdownImpl::RestartDesktop:
restart();
break;
case ShutdownImpl::TerminateDesktop:
prepareForTermination(FALSE);
quit();
break;
}
}
void DesktopApplication::restart()
{
prepareForTermination(TRUE);
#ifdef Q_WS_QWS
for ( int fd = 3; fd < 100; fd++ )
close( fd );
#if defined(QT_DEMO_SINGLE_FLOPPY)
execl( "/sbin/init", "qpe", 0 );
#elif defined(QT_QWS_CASSIOPEIA)
execl( "/bin/sh", "sh", 0 );
#else
execl( (qpeDir()+"/bin/qpe").latin1(), "qpe", 0 );
#endif
exit(1);
#endif
}
void Desktop::startTransferServer()
{
// start qcop bridge server
qcopBridge = new QCopBridge( 4243 );
if ( !qcopBridge->ok() ) {
delete qcopBridge;
qcopBridge = 0;
}
// start transfer server
transferServer = new TransferServer( 4242 );
if ( !transferServer->ok() ) {
delete transferServer;
transferServer = 0;
}
if ( !transferServer || !qcopBridge )
startTimer( 2000 );
}
void Desktop::timerEvent( QTimerEvent *e )
{
killTimer( e->timerId() );
startTransferServer();
}
void Desktop::terminateServers()
{
delete transferServer;
delete qcopBridge;
transferServer = 0;
qcopBridge = 0;
}
void Desktop::rereadVolumes()
{
Config cfg("qpe");
cfg.setGroup("Volume");
touchclick = cfg.readBoolEntry("TouchSound");
keyclick = cfg.readBoolEntry("KeySound");
alarmsound = cfg.readBoolEntry("AlarmSound");
// Config cfg("Sound");
// cfg.setGroup("System");
// touchclick = cfg.readBoolEntry("Touch");
// keyclick = cfg.readBoolEntry("Key");
}
void Desktop::keyClick()
{
if ( keyclick )
ODevice::inst ( )-> keySound ( );
}
diff --git a/core/launcher/launcher.pro b/core/launcher/launcher.pro
index ccf8231..169edc1 100644
--- a/core/launcher/launcher.pro
+++ b/core/launcher/launcher.pro
@@ -1,117 +1,117 @@
TEMPLATE = app
CONFIG = qt warn_on release
DESTDIR = $(OPIEDIR)/bin
HEADERS = background.h \
desktop.h \
qprocess.h \
mediummountgui.h \
info.h \
appicons.h \
taskbar.h \
sidething.h \
mrulist.h \
stabmon.h \
inputmethods.h \
systray.h \
wait.h \
shutdownimpl.h \
launcher.h \
launcherview.h \
$(OPIEDIR)/core/apps/calibrate/calibrate.h \
startmenu.h \
transferserver.h \
qcopbridge.h \
packageslave.h \
irserver.h \
$(OPIEDIR)/rsync/buf.h \
$(OPIEDIR)/rsync/checksum.h \
$(OPIEDIR)/rsync/command.h \
$(OPIEDIR)/rsync/emit.h \
$(OPIEDIR)/rsync/job.h \
$(OPIEDIR)/rsync/netint.h \
$(OPIEDIR)/rsync/protocol.h \
$(OPIEDIR)/rsync/prototab.h \
$(OPIEDIR)/rsync/rsync.h \
$(OPIEDIR)/rsync/search.h \
$(OPIEDIR)/rsync/stream.h \
$(OPIEDIR)/rsync/sumset.h \
$(OPIEDIR)/rsync/trace.h \
$(OPIEDIR)/rsync/types.h \
$(OPIEDIR)/rsync/util.h \
$(OPIEDIR)/rsync/whole.h \
$(OPIEDIR)/rsync/config_rsync.h \
$(OPIEDIR)/rsync/qrsync.h
# quicklauncher.h \
SOURCES = background.cpp \
desktop.cpp \
mediummountgui.cpp \
qprocess.cpp qprocess_unix.cpp \
info.cpp \
appicons.cpp \
taskbar.cpp \
sidething.cpp \
mrulist.cpp \
stabmon.cpp \
inputmethods.cpp \
systray.cpp \
wait.cpp \
shutdownimpl.cpp \
launcher.cpp \
launcherview.cpp \
$(OPIEDIR)/core/apps/calibrate/calibrate.cpp \
transferserver.cpp \
packageslave.cpp \
irserver.cpp \
qcopbridge.cpp \
startmenu.cpp \
main.cpp \
$(OPIEDIR)/rsync/base64.c \
$(OPIEDIR)/rsync/buf.c \
$(OPIEDIR)/rsync/checksum.c \
$(OPIEDIR)/rsync/command.c \
$(OPIEDIR)/rsync/delta.c \
$(OPIEDIR)/rsync/emit.c \
$(OPIEDIR)/rsync/hex.c \
$(OPIEDIR)/rsync/job.c \
$(OPIEDIR)/rsync/mdfour.c \
$(OPIEDIR)/rsync/mksum.c \
$(OPIEDIR)/rsync/msg.c \
$(OPIEDIR)/rsync/netint.c \
$(OPIEDIR)/rsync/patch.c \
$(OPIEDIR)/rsync/prototab.c \
$(OPIEDIR)/rsync/readsums.c \
$(OPIEDIR)/rsync/scoop.c \
$(OPIEDIR)/rsync/search.c \
$(OPIEDIR)/rsync/stats.c \
$(OPIEDIR)/rsync/stream.c \
$(OPIEDIR)/rsync/sumset.c \
$(OPIEDIR)/rsync/trace.c \
$(OPIEDIR)/rsync/tube.c \
$(OPIEDIR)/rsync/util.c \
$(OPIEDIR)/rsync/version.c \
$(OPIEDIR)/rsync/whole.c \
$(OPIEDIR)/rsync/qrsync.cpp
INTERFACES = syncdialog.ui
INCLUDEPATH += $(OPIEDIR)/include
DEPENDPATH += $(OPIEDIR)/include .
INCLUDEPATH += $(OPIEDIR)/core/apps/calibrate
DEPENDPATH += $(OPIEDIR)/core/apps/calibrate
INCLUDEPATH += $(OPIEDIR)/rsync
DEPENDPATH += $(OPIEDIR)/rsync
TARGET = qpe
-LIBS += -lqpe -lcrypt -lopie
+LIBS += -lqpe -lcrypt -lopie -luuid
TRANSLATIONS = ../../i18n/de/qpe.ts \
../../i18n/en/qpe.ts \
../../i18n/es/qpe.ts \
../../i18n/fr/qpe.ts \
../../i18n/hu/qpe.ts \
../../i18n/ja/qpe.ts \
../../i18n/ko/qpe.ts \
../../i18n/no/qpe.ts \
../../i18n/pl/qpe.ts \
../../i18n/pt/qpe.ts \
../../i18n/pt_BR/qpe.ts \
../../i18n/sl/qpe.ts \
../../i18n/zh_CN/qpe.ts \
../../i18n/zh_TW/qpe.ts
diff --git a/core/launcher/qcopbridge.cpp b/core/launcher/qcopbridge.cpp
index 2d084fc..85993ee 100644
--- a/core/launcher/qcopbridge.cpp
+++ b/core/launcher/qcopbridge.cpp
@@ -1,420 +1,424 @@
/**********************************************************************
-** Copyright (C) 2000 Trolltech AS. All rights reserved.
+** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
-** This file is part of Qtopia Environment.
+** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#include "qcopbridge.h"
#include "transferserver.h"
+#ifdef QWS
#include <qpe/qcopenvelope_qws.h>
+#endif
#include <qpe/qpeapplication.h>
+#include <qpe/version.h>
#include <qdir.h>
#include <qfile.h>
#include <qtextstream.h>
#include <qdatastream.h>
#include <qstringlist.h>
#include <qfileinfo.h>
#include <qregexp.h>
+#ifdef QWS
#include <qcopchannel_qws.h>
+#endif
-// actually this is wrong, _XOPEN_SOURCE should get defined on the commandline
-// and it should have a proper value assigned. (Simon)
-#if !defined(_XOPEN_SOURCE)
#define _XOPEN_SOURCE
-#endif
#include <pwd.h>
#include <sys/types.h>
#include <unistd.h>
#if defined(_OS_LINUX_)
#include <shadow.h>
#endif
//#define INSECURE
const int block_size = 51200;
QCopBridge::QCopBridge( Q_UINT16 port, QObject *parent,
const char* name )
: QServerSocket( port, 1, parent, name ),
desktopChannel( 0 ),
cardChannel( 0 )
{
if ( !ok() )
qWarning( "Failed to bind to port %d", port );
else {
+#ifndef QT_NO_COP
desktopChannel = new QCopChannel( "QPE/Desktop", this );
connect( desktopChannel, SIGNAL(received(const QCString &, const QByteArray &)),
this, SLOT(desktopMessage( const QCString &, const QByteArray &)) );
cardChannel = new QCopChannel( "QPE/Card", this );
connect( cardChannel, SIGNAL(received(const QCString &, const QByteArray &)),
this, SLOT(desktopMessage( const QCString &, const QByteArray &)) );
+#endif
}
sendSync = FALSE;
}
QCopBridge::~QCopBridge()
{
+#ifndef QT_NO_COP
delete desktopChannel;
+#endif
}
void QCopBridge::newConnection( int socket )
{
QCopBridgePI *pi = new QCopBridgePI( socket, this );
openConnections.append( pi );
connect ( pi, SIGNAL( connectionClosed( QCopBridgePI *) ), this, SLOT( connectionClosed( QCopBridgePI *) ) );
+#ifndef QT_NO_COP
QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::DisableSuspend;
+#endif
if ( sendSync ) {
pi ->startSync();
sendSync = FALSE;
}
}
void QCopBridge::connectionClosed( QCopBridgePI *pi )
{
openConnections.remove( pi );
if ( openConnections.count() == 0 ) {
+#ifndef QT_NO_COP
QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Enable;
+#endif
}
}
void QCopBridge::closeOpenConnections()
{
QCopBridgePI *pi;
for ( pi = openConnections.first(); pi != 0; pi = openConnections.next() )
pi->close();
}
void QCopBridge::desktopMessage( const QCString &command, const QByteArray &args )
{
command.stripWhiteSpace();
int paren = command.find( "(" );
if ( paren <= 0 ) {
qDebug("DesktopMessage: bad qcop syntax");
return;
}
QString params = command.mid( paren + 1 );
if ( params[params.length()-1] != ')' ) {
qDebug("DesktopMessage: bad qcop syntax");
return;
}
params.truncate( params.length()-1 );
QStringList paramList = QStringList::split( ",", params );
QString data;
if ( paramList.count() ) {
QDataStream stream( args, IO_ReadOnly );
for ( QStringList::Iterator it = paramList.begin(); it != paramList.end(); ++it ) {
QString str;
if ( *it == "QString" ) {
stream >> str;
} else if ( *it == "QCString" ) {
QCString cstr;
stream >> cstr;
str = QString::fromLocal8Bit( cstr );
} else if ( *it == "int" ) {
int i;
stream >> i;
str = QString::number( i );
} else if ( *it == "bool" ) {
int i;
stream >> i;
str = QString::number( i );
} else {
- qDebug(" cannot route the argument type %s through the qcop bridge", (*it).latin1() );
+ qDebug(" cannot route the argument type %s throught the qcop bridge", (*it).latin1() );
return;
}
- str.replace( QRegExp("&"), "&amp;" );
- str.replace( QRegExp(" "), "&0x20;" );
- str.replace( QRegExp("\n"), "&0x0d;" );
- str.replace( QRegExp("\r"), "&0x0a;" );
- data += " " + str;
+ QString estr;
+ for (int i=0; i<(int)str.length(); i++) {
+ QChar ch = str[i];
+ if ( ch.row() )
+ goto quick;
+ switch (ch.cell()) {
+ case '&':
+ estr.append( "&amp;" );
+ break;
+ case ' ':
+ estr.append( "&0x20;" );
+ break;
+ case '\n':
+ estr.append( "&0x0d;" );
+ break;
+ case '\r':
+ estr.append( "&0x0a;" );
+ break;
+ default: quick:
+ estr.append(ch);
+ }
+ }
+ data += " " + estr;
}
}
QString sendCommand = QString(command.data()) + data;
// send the command to all open connections
if ( command == "startSync()" ) {
// we need to buffer it a bit
sendSync = TRUE;
startTimer( 20000 );
}
QCopBridgePI *pi;
for ( pi = openConnections.first(); pi != 0; pi = openConnections.next() ) {
pi->sendDesktopMessage( sendCommand );
}
}
void QCopBridge::timerEvent( QTimerEvent * )
{
sendSync = FALSE;
killTimers();
}
QCopBridgePI::QCopBridgePI( int socket, QObject *parent, const char* name )
: QSocket( parent, name )
{
setSocket( socket );
peerport = peerPort();
peeraddress = peerAddress();
#ifndef INSECURE
- if ( !accessAuthorized(peeraddress) ) {
+ if ( !SyncAuthentication::isAuthorized(peeraddress) ) {
state = Forbidden;
startTimer( 0 );
} else
#endif
{
state = Connected;
sendSync = FALSE;
connect( this, SIGNAL( readyRead() ), SLOT( read() ) );
connect( this, SIGNAL( connectionClosed() ), SLOT( connectionClosed() ) );
- send( "220 Qtopia QCop bridge ready!" );
+ QString intro="220 Qtopia ";
+ intro += QPE_VERSION; intro += ";";
+ intro += "challenge="; intro += SyncAuthentication::serverId(); intro += ";";
+ intro += "loginname="; intro += SyncAuthentication::loginName(); intro += ";";
+ intro += "displayname="; intro += SyncAuthentication::ownerName(); intro += ";";
+ send( intro );
state = Wait_USER;
// idle timer to close connections when not used anymore
startTimer( 60000 );
connected = TRUE;
}
}
QCopBridgePI::~QCopBridgePI()
{
}
void QCopBridgePI::connectionClosed()
{
emit connectionClosed( this );
// qDebug( "Debug: Connection closed" );
delete this;
}
void QCopBridgePI::sendDesktopMessage( const QString &msg )
{
QString str = "CALL QPE/Desktop " + msg;
send ( str );
}
void QCopBridgePI::send( const QString& msg )
{
QTextStream os( this );
os << msg << endl;
//qDebug( "sending qcop message: %s", msg.latin1() );
}
void QCopBridgePI::read()
{
while ( canReadLine() )
process( readLine().stripWhiteSpace() );
}
-bool QCopBridgePI::checkUser( const QString& user )
-{
- if ( user.isEmpty() ) return FALSE;
-
- struct passwd *pw;
- pw = getpwuid( geteuid() );
- QString euser = QString::fromLocal8Bit( pw->pw_name );
- return user == euser;
-}
-
-bool QCopBridgePI::checkPassword( const QString& password )
-{
- // ### HACK for testing on local host
- return true;
-
- /*
- struct passwd *pw = 0;
- struct spwd *spw = 0;
-
- pw = getpwuid( geteuid() );
- spw = getspnam( pw->pw_name );
-
- QString cpwd = QString::fromLocal8Bit( pw->pw_passwd );
- if ( cpwd == "x" && spw )
- cpwd = QString::fromLocal8Bit( spw->sp_pwdp );
-
- QString cpassword = QString::fromLocal8Bit( crypt( password.local8Bit(), cpwd.local8Bit() ) );
- return cpwd == cpassword;
-*/
-}
-
void QCopBridgePI::process( const QString& message )
{
//qDebug( "Command: %s", message.latin1() );
// split message using "," as separator
QStringList msg = QStringList::split( " ", message );
if ( msg.isEmpty() ) return;
// command token
QString cmd = msg[0].upper();
// argument token
QString arg;
if ( msg.count() >= 2 )
arg = msg[1];
// we always respond to QUIT, regardless of state
if ( cmd == "QUIT" ) {
send( "211 Have a nice day!" );
delete this;
return;
}
// connected to client
if ( Connected == state )
return;
// waiting for user name
if ( Wait_USER == state ) {
- if ( cmd != "USER" || msg.count() < 2 || !checkUser( arg ) ) {
+ if ( cmd != "USER" || msg.count() < 2 || !SyncAuthentication::checkUser( arg ) ) {
send( "530 Please login with USER and PASS" );
return;
}
send( "331 User name ok, need password" );
state = Wait_PASS;
return;
}
// waiting for password
if ( Wait_PASS == state ) {
- if ( cmd != "PASS" || !checkPassword( arg ) ) {
- //if ( cmd != "PASS" || msg.count() < 2 || !checkPassword( arg ) ) {
+ if ( cmd != "PASS" || !SyncAuthentication::checkPassword( arg ) ) {
send( "530 Please login with USER and PASS" );
return;
}
send( "230 User logged in, proceed" );
state = Ready;
if ( sendSync ) {
sendDesktopMessage( "startSync()" );
sendSync = FALSE;
}
return;
}
// noop (NOOP)
else if ( cmd == "NOOP" ) {
connected = TRUE;
send( "200 Command okay" );
}
// call (CALL)
else if ( cmd == "CALL" ) {
// example: call QPE/System execute(QString) addressbook
if ( msg.count() < 3 ) {
send( "500 Syntax error, command unrecognized" );
}
else {
QString channel = msg[1];
QString command = msg[2];
command.stripWhiteSpace();
int paren = command.find( "(" );
if ( paren <= 0 ) {
send( "500 Syntax error, command unrecognized" );
return;
}
QString params = command.mid( paren + 1 );
if ( params[params.length()-1] != ')' ) {
send( "500 Syntax error, command unrecognized" );
return;
}
params.truncate( params.length()-1 );
QByteArray buffer;
QDataStream ds( buffer, IO_WriteOnly );
int msgId = 3;
QStringList paramList = QStringList::split( ",", params );
if ( paramList.count() > msg.count() - 3 ) {
send( "500 Syntax error, command unrecognized" );
return;
}
for ( QStringList::Iterator it = paramList.begin(); it != paramList.end(); ++it ) {
QString arg = msg[msgId];
arg.replace( QRegExp("&0x20;"), " " );
arg.replace( QRegExp("&amp;"), "&" );
arg.replace( QRegExp("&0x0d;"), "\n" );
arg.replace( QRegExp("&0x0a;"), "\r" );
if ( *it == "QString" )
ds << arg;
else if ( *it == "QCString" )
ds << arg.local8Bit();
else if ( *it == "int" )
ds << arg.toInt();
else if ( *it == "bool" )
ds << arg.toInt();
else {
send( "500 Syntax error, command unrecognized" );
return;
}
msgId++;
}
+#ifndef QT_NO_COP
if ( !QCopChannel::isRegistered( channel.latin1() ) ) {
// send message back about it
QString answer = "599 ChannelNotRegistered " + channel;
send( answer );
return;
}
+#endif
+#ifndef QT_NO_COP
if ( paramList.count() )
QCopChannel::send( channel.latin1(), command.latin1(), buffer );
else
QCopChannel::send( channel.latin1(), command.latin1() );
send( "200 Command okay" );
+#endif
}
}
// not implemented
else
send( "502 Command not implemented" );
}
void QCopBridgePI::timerEvent( QTimerEvent * )
{
if ( connected )
connected = FALSE;
else
connectionClosed();
}
diff --git a/core/launcher/qcopbridge.h b/core/launcher/qcopbridge.h
index 114b3ee..408d10d 100644
--- a/core/launcher/qcopbridge.h
+++ b/core/launcher/qcopbridge.h
@@ -1,95 +1,92 @@
/**********************************************************************
-** Copyright (C) 2000 Trolltech AS. All rights reserved.
+** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
-** This file is part of Qtopia Environment.
+** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#ifndef __qcopbridge_h__
#define __qcopbridge_h__
#include <qserversocket.h>
#include <qsocket.h>
#include <qdir.h>
#include <qfile.h>
#include <qbuffer.h>
class QFileInfo;
class QCopBridgePI;
class QCopChannel;
class QCopBridge : public QServerSocket
{
Q_OBJECT
public:
QCopBridge( Q_UINT16 port, QObject *parent = 0, const char* name = 0 );
virtual ~QCopBridge();
void newConnection( int socket );
void closeOpenConnections();
public slots:
void connectionClosed( QCopBridgePI *pi );
void desktopMessage( const QCString &call, const QByteArray & );
protected:
void timerEvent( QTimerEvent * );
private:
QCopChannel *desktopChannel;
QCopChannel *cardChannel;
QList<QCopBridgePI> openConnections;
bool sendSync;
};
class QCopBridgePI : public QSocket
{
Q_OBJECT
enum State { Connected, Wait_USER, Wait_PASS, Ready, Forbidden };
public:
QCopBridgePI( int socket, QObject *parent = 0, const char* name = 0 );
virtual ~QCopBridgePI();
void sendDesktopMessage( const QString &msg );
void startSync() { sendSync = TRUE; }
signals:
void connectionClosed( QCopBridgePI *);
protected slots:
void read();
void send( const QString& msg );
void process( const QString& command );
void connectionClosed();
protected:
- bool checkUser( const QString& user );
- bool checkPassword( const QString& pw );
-
void timerEvent( QTimerEvent *e );
private:
State state;
Q_UINT16 peerport;
QHostAddress peeraddress;
bool connected;
bool sendSync;
};
#endif
diff --git a/core/launcher/transferserver.cpp b/core/launcher/transferserver.cpp
index 7294f9c..a6dab07 100644
--- a/core/launcher/transferserver.cpp
+++ b/core/launcher/transferserver.cpp
@@ -1,1087 +1,1186 @@
/**********************************************************************
-** Copyright (C) 2000 Trolltech AS. All rights reserved.
+** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
-** This file is part of Qtopia Environment.
+** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#define _XOPEN_SOURCE
#include <pwd.h>
#include <sys/types.h>
#include <unistd.h>
#include <stdlib.h>
+#include <time.h>
+#include <shadow.h>
+
+extern "C" {
+#include <uuid/uuid.h>
+#define UUID_H_INCLUDED
+}
#if defined(_OS_LINUX_)
#include <shadow.h>
#endif
#include <qdir.h>
#include <qfile.h>
#include <qtextstream.h>
#include <qdatastream.h>
#include <qmessagebox.h>
#include <qstringlist.h>
#include <qfileinfo.h>
#include <qregexp.h>
//#include <qpe/qcopchannel_qws.h>
#include <qpe/process.h>
+#include <qpe/global.h>
#include <qpe/config.h>
+#include <qpe/contact.h>
+#include <qpe/quuid.h>
+#include <qpe/version.h>
+#ifdef QWS
#include <qpe/qcopenvelope_qws.h>
+#endif
#include "transferserver.h"
#include "qprocess.h"
const int block_size = 51200;
TransferServer::TransferServer( Q_UINT16 port, QObject *parent,
const char* name )
: QServerSocket( port, 1, parent, name )
{
if ( !ok() )
qWarning( "Failed to bind to port %d", port );
}
TransferServer::~TransferServer()
{
}
void TransferServer::newConnection( int socket )
{
(void) new ServerPI( socket, this );
}
-bool accessAuthorized(QHostAddress peeraddress)
+QString SyncAuthentication::serverId()
+{
+ Config cfg("Security");
+ cfg.setGroup("Sync");
+ QString r=cfg.readEntry("serverid");
+ if ( r.isEmpty() ) {
+ uuid_t uuid;
+ uuid_generate( uuid );
+ cfg.writeEntry("serverid",(r = QUuid( uuid ).toString()));
+ }
+ return r;
+}
+
+QString SyncAuthentication::ownerName()
+{
+ QString vfilename = Global::applicationFileName("addressbook",
+ "businesscard.vcf");
+ if (QFile::exists(vfilename)) {
+ Contact c;
+ c = Contact::readVCard( vfilename )[0];
+ return c.fullName();
+ }
+
+ return "";
+}
+
+QString SyncAuthentication::loginName()
+{
+ struct passwd *pw;
+ pw = getpwuid( geteuid() );
+ return QString::fromLocal8Bit( pw->pw_name );
+}
+
+int SyncAuthentication::isAuthorized(QHostAddress peeraddress)
{
Config cfg("Security");
cfg.setGroup("Sync");
- uint auth_peer = cfg.readNumEntry("auth_peer",0xc0a80100);
+ QString allowedstr = cfg.readEntry("auth_peer","192.168.1.0");
+ QHostAddress allowed;
+ allowed.setAddress(allowedstr);
+ uint auth_peer = allowed.ip4Addr();
uint auth_peer_bits = cfg.readNumEntry("auth_peer_bits",24);
- bool ok = (peeraddress.ip4Addr() & (((1<<auth_peer_bits)-1)<<(32-auth_peer_bits)))
- == auth_peer;
- /* Allows denial-of-service attack.
- if ( !ok ) {
- QMessageBox::warning(0,tr("Security"),
- tr("<p>An attempt to access this device from %1 has been denied.")
- .arg(peeraddress.toString()));
+ uint mask = auth_peer_bits >= 32 // shifting by 32 is not defined
+ ? 0xffffffff : (((1<<auth_peer_bits)-1)<<(32-auth_peer_bits));
+ return (peeraddress.ip4Addr() & mask) == auth_peer;
+}
+
+bool SyncAuthentication::checkUser( const QString& user )
+{
+ if ( user.isEmpty() ) return FALSE;
+ QString euser = loginName();
+ return user == euser;
+}
+
+bool SyncAuthentication::checkPassword( const QString& password )
+{
+#ifdef ALLOW_UNIX_USER_FTP
+ // First, check system password...
+
+ struct passwd *pw = 0;
+ struct spwd *spw = 0;
+
+ pw = getpwuid( geteuid() );
+ spw = getspnam( pw->pw_name );
+
+ QString cpwd = QString::fromLocal8Bit( pw->pw_passwd );
+ if ( cpwd == "x" && spw )
+ cpwd = QString::fromLocal8Bit( spw->sp_pwdp );
+
+ // Note: some systems use more than crypt for passwords.
+ QString cpassword = QString::fromLocal8Bit( crypt( password.local8Bit(), cpwd.local8Bit() ) );
+ if ( cpwd == cpassword )
+ return TRUE;
+#endif
+
+ static int lastdenial=0;
+ static int denials=0;
+ int now = time(0);
+
+ // Detect old Qtopia Desktop (no password)
+ if ( password.isEmpty() ) {
+ if ( denials < 1 || now > lastdenial+600 ) {
+ QMessageBox::warning( 0,tr("Sync Connection"),
+ tr("<p>An unauthorized system is requesting access to this device."
+ "<p>If you are using a version of Qtopia Desktop older than 1.5.1, "
+ "please upgrade."),
+ tr("Deny") );
+ denials++;
+ lastdenial=now;
}
- */
- return ok;
+ return FALSE;
}
+ // Second, check sync password...
+ if ( password.left(6) == "Qtopia" ) {
+ QString cpassword = QString::fromLocal8Bit( crypt( password.mid(8).local8Bit(), "qp" ) );
+ Config cfg("Security");
+ cfg.setGroup("Sync");
+ QString pwds = cfg.readEntry("Passwords");
+ if ( QStringList::split(QChar(' '),pwds).contains(cpassword) )
+ return TRUE;
+
+ // Unrecognized system. Be careful...
+
+ if ( (denials > 2 && now < lastdenial+600)
+ || QMessageBox::warning(0,tr("Sync Connection"),
+ tr("<p>An unrecognized system is requesting access to this device."
+ "<p>If you have just initiated a Sync for the first time, this is normal."),
+ tr("Allow"),tr("Deny"))==1 )
+ {
+ denials++;
+ lastdenial=now;
+ return FALSE;
+ } else {
+ denials=0;
+ cfg.writeEntry("Passwords",pwds+" "+cpassword);
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+
ServerPI::ServerPI( int socket, QObject *parent, const char* name )
: QSocket( parent, name ) , dtp( 0 ), serversocket( 0 ), waitsocket( 0 )
{
state = Connected;
setSocket( socket );
peerport = peerPort();
peeraddress = peerAddress();
#ifndef INSECURE
- if ( !accessAuthorized(peeraddress) ) {
+ if ( !SyncAuthentication::isAuthorized(peeraddress) ) {
state = Forbidden;
startTimer( 0 );
} else
#endif
{
connect( this, SIGNAL( readyRead() ), SLOT( read() ) );
connect( this, SIGNAL( connectionClosed() ), SLOT( connectionClosed() ) );
passiv = FALSE;
for( int i = 0; i < 4; i++ )
wait[i] = FALSE;
- send( "220 Qtopia transfer service ready!" );
+ send( "220 Qtopia " QPE_VERSION " FTP Server" );
state = Wait_USER;
dtp = new ServerDTP( this );
connect( dtp, SIGNAL( completed() ), SLOT( dtpCompleted() ) );
connect( dtp, SIGNAL( failed() ), SLOT( dtpFailed() ) );
connect( dtp, SIGNAL( error( int ) ), SLOT( dtpError( int ) ) );
directory = QDir::currentDirPath();
static int p = 1024;
while ( !serversocket || !serversocket->ok() ) {
delete serversocket;
serversocket = new ServerSocket( ++p, this );
}
connect( serversocket, SIGNAL( newIncomming( int ) ),
SLOT( newConnection( int ) ) );
}
}
ServerPI::~ServerPI()
{
}
void ServerPI::connectionClosed()
{
// qDebug( "Debug: Connection closed" );
delete this;
}
void ServerPI::send( const QString& msg )
{
QTextStream os( this );
os << msg << endl;
//qDebug( "Reply: %s", msg.latin1() );
}
void ServerPI::read()
{
while ( canReadLine() )
process( readLine().stripWhiteSpace() );
}
-bool ServerPI::checkUser( const QString& user )
-{
- if ( user.isEmpty() ) return FALSE;
-
- struct passwd *pw;
- pw = getpwuid( geteuid() );
- QString euser = QString::fromLocal8Bit( pw->pw_name );
- return user == euser;
-}
-
-bool ServerPI::checkPassword( const QString& /* password */ )
-{
- // ### HACK for testing on local host
- return true;
-
- /*
- struct passwd *pw = 0;
- struct spwd *spw = 0;
-
- pw = getpwuid( geteuid() );
- spw = getspnam( pw->pw_name );
-
- QString cpwd = QString::fromLocal8Bit( pw->pw_passwd );
- if ( cpwd == "x" && spw )
- cpwd = QString::fromLocal8Bit( spw->sp_pwdp );
-
- QString cpassword = QString::fromLocal8Bit( crypt( password.local8Bit(), cpwd.local8Bit() ) );
- return cpwd == cpassword;
-*/
-}
-
bool ServerPI::checkReadFile( const QString& file )
{
QString filename;
if ( file[0] != "/" )
filename = directory.path() + "/" + file;
else
filename = file;
QFileInfo fi( filename );
return ( fi.exists() && fi.isReadable() );
}
bool ServerPI::checkWriteFile( const QString& file )
{
QString filename;
if ( file[0] != "/" )
filename = directory.path() + "/" + file;
else
filename = file;
QFileInfo fi( filename );
if ( fi.exists() )
if ( !QFile( filename ).remove() )
return FALSE;
return TRUE;
}
void ServerPI::process( const QString& message )
{
//qDebug( "Command: %s", message.latin1() );
// split message using "," as separator
QStringList msg = QStringList::split( " ", message );
if ( msg.isEmpty() ) return;
// command token
QString cmd = msg[0].upper();
// argument token
QString arg;
if ( msg.count() >= 2 )
arg = msg[1];
// full argument string
QString args;
if ( msg.count() >= 2 ) {
QStringList copy( msg );
// FIXME: for Qt3
// copy.pop_front()
copy.remove( copy.begin() );
args = copy.join( " " );
}
//qDebug( "args: %s", args.latin1() );
// we always respond to QUIT, regardless of state
if ( cmd == "QUIT" ) {
send( "211 Good bye!" );
delete this;
return;
}
// connected to client
if ( Connected == state )
return;
// waiting for user name
if ( Wait_USER == state ) {
- if ( cmd != "USER" || msg.count() < 2 || !checkUser( arg ) ) {
+ if ( cmd != "USER" || msg.count() < 2 || !SyncAuthentication::checkUser( arg ) ) {
send( "530 Please login with USER and PASS" );
return;
}
send( "331 User name ok, need password" );
state = Wait_PASS;
return;
}
// waiting for password
if ( Wait_PASS == state ) {
- if ( cmd != "PASS" || !checkPassword( arg ) ) {
- //if ( cmd != "PASS" || msg.count() < 2 || !checkPassword( arg ) ) {
+ if ( cmd != "PASS" || !SyncAuthentication::checkPassword( arg ) ) {
send( "530 Please login with USER and PASS" );
return;
}
send( "230 User logged in, proceed" );
state = Ready;
return;
}
// ACCESS CONTROL COMMANDS
// account (ACCT)
if ( cmd == "ACCT" ) {
// even wu-ftp does not support it
send( "502 Command not implemented" );
}
// change working directory (CWD)
else if ( cmd == "CWD" ) {
if ( !args.isEmpty() ) {
if ( directory.cd( args, TRUE ) )
send( "250 Requested file action okay, completed" );
else
send( "550 Requested action not taken" );
}
else
send( "500 Syntax error, command unrecognized" );
}
// change to parent directory (CDUP)
else if ( cmd == "CDUP" ) {
if ( directory.cdUp() )
send( "250 Requested file action okay, completed" );
else
send( "550 Requested action not taken" );
}
// structure mount (SMNT)
else if ( cmd == "SMNT" ) {
// even wu-ftp does not support it
send( "502 Command not implemented" );
}
// reinitialize (REIN)
else if ( cmd == "REIN" ) {
// even wu-ftp does not support it
send( "502 Command not implemented" );
}
// TRANSFER PARAMETER COMMANDS
// data port (PORT)
else if ( cmd == "PORT" ) {
if ( parsePort( arg ) )
send( "200 Command okay" );
else
send( "500 Syntax error, command unrecognized" );
}
// passive (PASV)
else if ( cmd == "PASV" ) {
passiv = TRUE;
send( "227 Entering Passive Mode ("
+ address().toString().replace( QRegExp( "\\." ), "," ) + ","
+ QString::number( ( serversocket->port() ) >> 8 ) + ","
+ QString::number( ( serversocket->port() ) & 0xFF ) +")" );
}
// representation type (TYPE)
else if ( cmd == "TYPE" ) {
if ( arg.upper() == "A" || arg.upper() == "I" )
send( "200 Command okay" );
else
send( "504 Command not implemented for that parameter" );
}
// file structure (STRU)
else if ( cmd == "STRU" ) {
if ( arg.upper() == "F" )
send( "200 Command okay" );
else
send( "504 Command not implemented for that parameter" );
}
// transfer mode (MODE)
else if ( cmd == "MODE" ) {
if ( arg.upper() == "S" )
send( "200 Command okay" );
else
send( "504 Command not implemented for that parameter" );
}
// FTP SERVICE COMMANDS
// retrieve (RETR)
else if ( cmd == "RETR" )
if ( !args.isEmpty() && checkReadFile( absFilePath( args ) )
|| backupRestoreGzip( absFilePath( args ) ) ) {
send( "150 File status okay" );
sendFile( absFilePath( args ) );
}
else {
qDebug("550 Requested action not taken");
send( "550 Requested action not taken" );
}
// store (STOR)
else if ( cmd == "STOR" )
if ( !args.isEmpty() && checkWriteFile( absFilePath( args ) ) ) {
send( "150 File status okay" );
retrieveFile( absFilePath( args ) );
}
else
send( "550 Requested action not taken" );
// store unique (STOU)
else if ( cmd == "STOU" ) {
send( "502 Command not implemented" );
}
// append (APPE)
else if ( cmd == "APPE" ) {
send( "502 Command not implemented" );
}
// allocate (ALLO)
else if ( cmd == "ALLO" ) {
send( "200 Command okay" );
}
// restart (REST)
else if ( cmd == "REST" ) {
send( "502 Command not implemented" );
}
// rename from (RNFR)
else if ( cmd == "RNFR" ) {
renameFrom = QString::null;
if ( args.isEmpty() )
send( "500 Syntax error, command unrecognized" );
else {
QFile file( absFilePath( args ) );
if ( file.exists() ) {
send( "350 File exists, ready for destination name" );
renameFrom = absFilePath( args );
}
else
send( "550 Requested action not taken" );
}
}
// rename to (RNTO)
else if ( cmd == "RNTO" ) {
if ( lastCommand != "RNFR" )
send( "503 Bad sequence of commands" );
else if ( args.isEmpty() )
send( "500 Syntax error, command unrecognized" );
else {
QDir dir( absFilePath( args ) );
if ( dir.rename( renameFrom, absFilePath( args ), TRUE ) )
send( "250 Requested file action okay, completed." );
else
send( "550 Requested action not taken" );
}
}
// abort (ABOR)
else if ( cmd.contains( "ABOR" ) ) {
dtp->close();
if ( dtp->dtpMode() != ServerDTP::Idle )
send( "426 Connection closed; transfer aborted" );
else
send( "226 Closing data connection" );
}
// delete (DELE)
else if ( cmd == "DELE" ) {
if ( args.isEmpty() )
send( "500 Syntax error, command unrecognized" );
else {
QFile file( absFilePath( args ) ) ;
- if ( file.remove() )
+ if ( file.remove() ) {
send( "250 Requested file action okay, completed" );
- else
+ QCopEnvelope e("QPE/System", "linkChanged(QString)" );
+ e << file.name();
+ } else {
send( "550 Requested action not taken" );
}
}
+ }
// remove directory (RMD)
else if ( cmd == "RMD" ) {
if ( args.isEmpty() )
send( "500 Syntax error, command unrecognized" );
else {
QDir dir;
if ( dir.rmdir( absFilePath( args ), TRUE ) )
send( "250 Requested file action okay, completed" );
else
send( "550 Requested action not taken" );
}
}
// make directory (MKD)
else if ( cmd == "MKD" ) {
if ( args.isEmpty() ) {
qDebug(" Error: no arg");
send( "500 Syntax error, command unrecognized" );
}
else {
QDir dir;
if ( dir.mkdir( absFilePath( args ), TRUE ) )
send( "250 Requested file action okay, completed." );
else
send( "550 Requested action not taken" );
}
}
// print working directory (PWD)
else if ( cmd == "PWD" ) {
send( "257 \"" + directory.path() +"\"" );
}
// list (LIST)
else if ( cmd == "LIST" ) {
if ( sendList( absFilePath( args ) ) )
send( "150 File status okay" );
else
send( "500 Syntax error, command unrecognized" );
}
// size (SIZE)
else if ( cmd == "SIZE" ) {
QString filePath = absFilePath( args );
QFileInfo fi( filePath );
bool gzipfile = backupRestoreGzip( filePath );
if ( !fi.exists() && !gzipfile )
send( "500 Syntax error, command unrecognized" );
else {
if ( !gzipfile )
send( "213 " + QString::number( fi.size() ) );
else {
Process duproc( QString("du") );
duproc.addArgument("-s");
QString in, out;
if ( !duproc.exec(in, out) ) {
qDebug("du process failed; just sending back 1K");
send( "213 1024");
}
else {
QString size = out.left( out.find("\t") );
int guess = size.toInt()/5;
if ( filePath.contains("doc") )
guess *= 1000;
qDebug("sending back gzip guess of %d", guess);
send( "213 " + QString::number(guess) );
}
}
}
}
// name list (NLST)
else if ( cmd == "NLST" ) {
send( "502 Command not implemented" );
}
// site parameters (SITE)
else if ( cmd == "SITE" ) {
send( "502 Command not implemented" );
}
// system (SYST)
else if ( cmd == "SYST" ) {
send( "215 UNIX Type: L8" );
}
// status (STAT)
else if ( cmd == "STAT" ) {
send( "502 Command not implemented" );
}
// help (HELP )
else if ( cmd == "HELP" ) {
send( "502 Command not implemented" );
}
// noop (NOOP)
else if ( cmd == "NOOP" ) {
send( "200 Command okay" );
}
// not implemented
else
send( "502 Command not implemented" );
lastCommand = cmd;
}
bool ServerPI::backupRestoreGzip( const QString &file )
{
return (file.find( "backup" ) != -1 &&
file.findRev( ".tgz" ) == (int)file.length()-4 );
}
bool ServerPI::backupRestoreGzip( const QString &file, QStringList &targets )
{
if ( file.find( "backup" ) != -1 &&
file.findRev( ".tgz" ) == (int)file.length()-4 ) {
QFileInfo info( file );
targets = info.dirPath( TRUE );
qDebug("ServerPI::backupRestoreGzip for %s = %s", file.latin1(),
targets.join(" ").latin1() );
return true;
}
return false;
}
void ServerPI::sendFile( const QString& file )
{
if ( passiv ) {
wait[SendFile] = TRUE;
waitfile = file;
if ( waitsocket )
newConnection( waitsocket );
}
else {
QStringList targets;
if ( backupRestoreGzip( file, targets ) )
dtp->sendGzipFile( file, targets, peeraddress, peerport );
else dtp->sendFile( file, peeraddress, peerport );
}
}
void ServerPI::retrieveFile( const QString& file )
{
if ( passiv ) {
wait[RetrieveFile] = TRUE;
waitfile = file;
if ( waitsocket )
newConnection( waitsocket );
}
else {
QStringList targets;
if ( backupRestoreGzip( file, targets ) )
dtp->retrieveGzipFile( file, peeraddress, peerport );
else
dtp->retrieveFile( file, peeraddress, peerport );
}
}
bool ServerPI::parsePort( const QString& pp )
{
QStringList p = QStringList::split( ",", pp );
if ( p.count() != 6 ) return FALSE;
// h1,h2,h3,h4,p1,p2
peeraddress = QHostAddress( ( p[0].toInt() << 24 ) + ( p[1].toInt() << 16 ) +
( p[2].toInt() << 8 ) + p[3].toInt() );
peerport = ( p[4].toInt() << 8 ) + p[5].toInt();
return TRUE;
}
void ServerPI::dtpCompleted()
{
- dtp->close();
- waitsocket = 0;
send( "226 Closing data connection, file transfer successful" );
+ if ( dtp->dtpMode() == ServerDTP::RetrieveFile ) {
+ QString fn = dtp->fileName();
+ if ( fn.right(8)==".desktop" && fn.find("/Documents/")>=0 ) {
+ QCopEnvelope e("QPE/System", "linkChanged(QString)" );
+ e << fn;
+ }
+ }
+ waitsocket = 0;
+ dtp->close();
}
void ServerPI::dtpFailed()
{
dtp->close();
waitsocket = 0;
send( "451 Requested action aborted: local error in processing" );
}
void ServerPI::dtpError( int )
{
dtp->close();
waitsocket = 0;
send( "451 Requested action aborted: local error in processing" );
}
bool ServerPI::sendList( const QString& arg )
{
QByteArray listing;
QBuffer buffer( listing );
if ( !buffer.open( IO_WriteOnly ) )
return FALSE;
QTextStream ts( &buffer );
QString fn = arg;
if ( fn.isEmpty() )
fn = directory.path();
QFileInfo fi( fn );
if ( !fi.exists() ) return FALSE;
// return file listing
if ( fi.isFile() ) {
ts << fileListing( &fi ) << endl;
}
// return directory listing
else if ( fi.isDir() ) {
QDir dir( fn );
const QFileInfoList *list = dir.entryInfoList( QDir::All | QDir::Hidden );
QFileInfoListIterator it( *list );
QFileInfo *info;
unsigned long total = 0;
while ( ( info = it.current() ) ) {
if ( info->fileName() != "." && info->fileName() != ".." )
total += info->size();
++it;
}
ts << "total " << QString::number( total / 1024 ) << endl;
it.toFirst();
while ( ( info = it.current() ) ) {
if ( info->fileName() == "." || info->fileName() == ".." ) {
++it;
continue;
}
ts << fileListing( info ) << endl;
++it;
}
}
if ( passiv ) {
waitarray = buffer.buffer();
wait[SendByteArray] = TRUE;
if ( waitsocket )
newConnection( waitsocket );
}
else
dtp->sendByteArray( buffer.buffer(), peeraddress, peerport );
return TRUE;
}
QString ServerPI::fileListing( QFileInfo *info )
{
if ( !info ) return QString::null;
QString s;
// type char
if ( info->isDir() )
s += "d";
else if ( info->isSymLink() )
s += "l";
else
s += "-";
// permisson string
s += permissionString( info ) + " ";
// number of hardlinks
int subdirs = 1;
if ( info->isDir() )
subdirs = 2;
// FIXME : this is to slow
//if ( info->isDir() )
//subdirs = QDir( info->absFilePath() ).entryList( QDir::Dirs ).count();
s += QString::number( subdirs ).rightJustify( 3, ' ', TRUE ) + " ";
// owner
s += info->owner().leftJustify( 8, ' ', TRUE ) + " ";
// group
s += info->group().leftJustify( 8, ' ', TRUE ) + " ";
// file size in bytes
s += QString::number( info->size() ).rightJustify( 9, ' ', TRUE ) + " ";
// last modified date
QDate date = info->lastModified().date();
QTime time = info->lastModified().time();
s += date.monthName( date.month() ) + " "
+ QString::number( date.day() ).rightJustify( 2, ' ', TRUE ) + " "
+ QString::number( time.hour() ).rightJustify( 2, '0', TRUE ) + ":"
+ QString::number( time.minute() ).rightJustify( 2,'0', TRUE ) + " ";
// file name
s += info->fileName();
return s;
}
QString ServerPI::permissionString( QFileInfo *info )
{
if ( !info ) return QString( "---------" );
QString s;
// user
if ( info->permission( QFileInfo::ReadUser ) ) s += "r";
else s += "-";
if ( info->permission( QFileInfo::WriteUser ) ) s += "w";
else s += "-";
if ( info->permission( QFileInfo::ExeUser ) ) s += "x";
else s += "-";
// group
if ( info->permission( QFileInfo::ReadGroup ) ) s += "r";
else s += "-";
if ( info->permission( QFileInfo::WriteGroup ) )s += "w";
else s += "-";
if ( info->permission( QFileInfo::ExeGroup ) ) s += "x";
else s += "-";
// exec
if ( info->permission( QFileInfo::ReadOther ) ) s += "r";
else s += "-";
if ( info->permission( QFileInfo::WriteOther ) ) s += "w";
else s += "-";
if ( info->permission( QFileInfo::ExeOther ) ) s += "x";
else s += "-";
return s;
}
void ServerPI::newConnection( int socket )
{
//qDebug( "New incomming connection" );
if ( !passiv ) return;
if ( wait[SendFile] ) {
QStringList targets;
if ( backupRestoreGzip( waitfile, targets ) )
dtp->sendGzipFile( waitfile, targets );
else
dtp->sendFile( waitfile );
dtp->setSocket( socket );
}
else if ( wait[RetrieveFile] ) {
qDebug("check retrieve file");
if ( backupRestoreGzip( waitfile ) )
dtp->retrieveGzipFile( waitfile );
else
dtp->retrieveFile( waitfile );
dtp->setSocket( socket );
}
else if ( wait[SendByteArray] ) {
dtp->sendByteArray( waitarray );
dtp->setSocket( socket );
}
else if ( wait[RetrieveByteArray] ) {
qDebug("retrieve byte array");
dtp->retrieveByteArray();
dtp->setSocket( socket );
}
else
waitsocket = socket;
for( int i = 0; i < 4; i++ )
wait[i] = FALSE;
}
QString ServerPI::absFilePath( const QString& file )
{
if ( file.isEmpty() ) return file;
QString filepath( file );
if ( file[0] != "/" )
filepath = directory.path() + "/" + file;
return filepath;
}
void ServerPI::timerEvent( QTimerEvent * )
{
connectionClosed();
}
-ServerDTP::ServerDTP( QObject *parent, const char* name )
+ServerDTP::ServerDTP( QObject *parent = 0, const char* name = 0)
: QSocket( parent, name ), mode( Idle ), createTargzProc( 0 ),
retrieveTargzProc( 0 ), gzipProc( 0 )
{
connect( this, SIGNAL( connected() ), SLOT( connected() ) );
connect( this, SIGNAL( connectionClosed() ), SLOT( connectionClosed() ) );
connect( this, SIGNAL( bytesWritten( int ) ), SLOT( bytesWritten( int ) ) );
connect( this, SIGNAL( readyRead() ), SLOT( readyRead() ) );
gzipProc = new QProcess( this, "gzipProc" );
gzipProc->setCommunication( QProcess::Stdin | QProcess::Stdout );
createTargzProc = new QProcess( QString("tar"), this, "createTargzProc");
createTargzProc->setCommunication( QProcess::Stdout );
createTargzProc->setWorkingDirectory( QDir::rootDirPath() );
connect( createTargzProc, SIGNAL( processExited() ), SLOT( targzDone() ) );
QStringList args = "tar";
args += "-xv";
retrieveTargzProc = new QProcess( args, this, "retrieveTargzProc" );
retrieveTargzProc->setCommunication( QProcess::Stdin );
retrieveTargzProc->setWorkingDirectory( QDir::rootDirPath() );
connect( retrieveTargzProc, SIGNAL( processExited() ),
SIGNAL( completed() ) );
connect( retrieveTargzProc, SIGNAL( processExited() ),
SLOT( extractTarDone() ) );
}
ServerDTP::~ServerDTP()
{
buf.close();
file.close();
createTargzProc->kill();
}
void ServerDTP::extractTarDone()
{
qDebug("extract done");
+#ifndef QT_NO_COP
QCopEnvelope e( "QPE/Desktop", "restoreDone(QString)" );
e << file.name();
+#endif
}
void ServerDTP::connected()
{
// send file mode
switch ( mode ) {
case SendFile :
if ( !file.exists() || !file.open( IO_ReadOnly) ) {
emit failed();
mode = Idle;
return;
}
//qDebug( "Debug: Sending file '%s'", file.name().latin1() );
bytes_written = 0;
if ( file.size() == 0 ) {
//make sure it doesn't hang on empty files
file.close();
emit completed();
mode = Idle;
} else {
if( !file.atEnd() ) {
QCString s;
s.resize( block_size );
int bytes = file.readBlock( s.data(), block_size );
writeBlock( s.data(), bytes );
}
}
break;
case SendGzipFile:
if ( createTargzProc->isRunning() ) {
// SHOULDN'T GET HERE, BUT DOING A SAFETY CHECK ANYWAY
qWarning("Previous tar --gzip process is still running; killing it...");
createTargzProc->kill();
}
bytes_written = 0;
qDebug("==>start send tar process");
if ( !createTargzProc->start() )
qWarning("Error starting %s or %s",
createTargzProc->arguments().join(" ").latin1(),
gzipProc->arguments().join(" ").latin1() );
break;
case SendBuffer:
if ( !buf.open( IO_ReadOnly) ) {
emit failed();
mode = Idle;
return;
}
// qDebug( "Debug: Sending byte array" );
bytes_written = 0;
while( !buf.atEnd() )
putch( buf.getch() );
buf.close();
break;
case RetrieveFile:
// retrieve file mode
if ( file.exists() && !file.remove() ) {
emit failed();
mode = Idle;
return;
}
if ( !file.open( IO_WriteOnly) ) {
emit failed();
mode = Idle;
return;
}
// qDebug( "Debug: Retrieving file %s", file.name().latin1() );
break;
case RetrieveGzipFile:
qDebug("=-> starting tar process to receive .tgz file");
break;
case RetrieveBuffer:
// retrieve buffer mode
if ( !buf.open( IO_WriteOnly) ) {
emit failed();
mode = Idle;
return;
}
// qDebug( "Debug: Retrieving byte array" );
break;
case Idle:
qDebug("connection established but mode set to Idle; BUG!");
break;
}
}
void ServerDTP::connectionClosed()
{
//qDebug( "Debug: Data connection closed %ld bytes written", bytes_written );
// send file mode
if ( SendFile == mode ) {
if ( bytes_written == file.size() )
emit completed();
else
emit failed();
}
// send buffer mode
else if ( SendBuffer == mode ) {
if ( bytes_written == buf.size() )
emit completed();
else
emit failed();
}
// retrieve file mode
else if ( RetrieveFile == mode ) {
file.close();
emit completed();
}
else if ( RetrieveGzipFile == mode ) {
qDebug("Done writing ungzip file; closing input");
gzipProc->flushStdin();
gzipProc->closeStdin();
}
// retrieve buffer mode
else if ( RetrieveBuffer == mode ) {
buf.close();
emit completed();
}
mode = Idle;
}
void ServerDTP::bytesWritten( int bytes )
{
bytes_written += bytes;
// send file mode
if ( SendFile == mode ) {
if ( bytes_written == file.size() ) {
// qDebug( "Debug: Sending complete: %d bytes", file.size() );
file.close();
emit completed();
mode = Idle;
}
else if( !file.atEnd() ) {
QCString s;
s.resize( block_size );
int bytes = file.readBlock( s.data(), block_size );
writeBlock( s.data(), bytes );
}
}
// send buffer mode
if ( SendBuffer == mode ) {
if ( bytes_written == buf.size() ) {
// qDebug( "Debug: Sending complete: %d bytes", buf.size() );
emit completed();
mode = Idle;
}
}
}
void ServerDTP::readyRead()
{
// retrieve file mode
if ( RetrieveFile == mode ) {
QCString s;
s.resize( bytesAvailable() );
readBlock( s.data(), bytesAvailable() );
file.writeBlock( s.data(), s.size() );
}
else if ( RetrieveGzipFile == mode ) {
if ( !gzipProc->isRunning() )
gzipProc->start();
QByteArray s;
s.resize( bytesAvailable() );
readBlock( s.data(), bytesAvailable() );
gzipProc->writeToStdin( s );
qDebug("wrote %d bytes to ungzip ", s.size() );
}
// retrieve buffer mode
else if ( RetrieveBuffer == mode ) {
QCString s;
s.resize( bytesAvailable() );
readBlock( s.data(), bytesAvailable() );
buf.writeBlock( s.data(), s.size() );
}
}
diff --git a/core/launcher/transferserver.h b/core/launcher/transferserver.h
index 076e460..a3bb060 100644
--- a/core/launcher/transferserver.h
+++ b/core/launcher/transferserver.h
@@ -1,168 +1,179 @@
/**********************************************************************
-** Copyright (C) 2000 Trolltech AS. All rights reserved.
+** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
-** This file is part of Qtopia Environment.
+** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#include <qserversocket.h>
#include <qsocket.h>
#include <qdir.h>
#include <qfile.h>
#include <qbuffer.h>
class QFileInfo;
class QProcess;
class TransferServer : public QServerSocket
{
Q_OBJECT
public:
TransferServer( Q_UINT16 port, QObject *parent = 0, const char* name = 0 );
virtual ~TransferServer();
void newConnection( int socket );
};
+class SyncAuthentication : QObject
+{
+ Q_OBJECT
+
+public:
+ static int isAuthorized(QHostAddress peeraddress);
+ static bool checkPassword(const QString& pw);
+ static bool checkUser(const QString& user);
+
+ static QString serverId();
+ static QString loginName();
+ static QString ownerName();
+};
+
class ServerDTP : public QSocket
{
Q_OBJECT
public:
ServerDTP( QObject *parent = 0, const char* name = 0 );
~ServerDTP();
enum Mode{ Idle = 0, SendFile, SendGzipFile, SendBuffer,
RetrieveFile, RetrieveGzipFile, RetrieveBuffer };
void sendFile( const QString fn );
void sendFile( const QString fn, const QHostAddress& host, Q_UINT16 port );
void sendGzipFile( const QString &fn, const QStringList &archiveTargets );
void sendGzipFile( const QString &fn, const QStringList &archiveTargets,
const QHostAddress& host, Q_UINT16 port );
void sendByteArray( const QByteArray& array );
void sendByteArray( const QByteArray& array, const QHostAddress& host, Q_UINT16 port );
void retrieveFile( const QString fn );
void retrieveFile( const QString fn, const QHostAddress& host, Q_UINT16 port );
void retrieveGzipFile( const QString &fn );
void retrieveGzipFile( const QString &fn, const QHostAddress& host, Q_UINT16 port );
void retrieveByteArray();
void retrieveByteArray( const QHostAddress& host, Q_UINT16 port );
Mode dtpMode() { return mode; }
QByteArray buffer() { return buf.buffer(); }
+ QString fileName() const { return file.name(); }
void setSocket( int socket );
signals:
void completed();
void failed();
private slots:
void connectionClosed();
void connected();
void bytesWritten( int bytes );
void readyRead();
void writeTargzBlock();
void targzDone();
void gzipTarBlock();
void tarExtractBlock();
void gunzipDone();
void extractTarDone();
private:
unsigned long bytes_written;
Mode mode;
QFile file;
QBuffer buf;
QProcess *createTargzProc;
QProcess *retrieveTargzProc;
QProcess *gzipProc;
};
class ServerSocket : public QServerSocket
{
Q_OBJECT
public:
ServerSocket( Q_UINT16 port, QObject *parent = 0, const char* name = 0 )
: QServerSocket( port, 1, parent, name ) {}
void newConnection( int socket ) { emit newIncomming( socket ); }
signals:
void newIncomming( int socket );
};
class ServerPI : public QSocket
{
Q_OBJECT
enum State { Connected, Wait_USER, Wait_PASS, Ready, Forbidden };
enum Transfer { SendFile = 0, RetrieveFile = 1, SendByteArray = 2, RetrieveByteArray = 3 };
public:
ServerPI( int socket, QObject *parent = 0, const char* name = 0 );
virtual ~ServerPI();
protected slots:
void read();
void send( const QString& msg );
void process( const QString& command );
void connectionClosed();
void dtpCompleted();
void dtpFailed();
void dtpError( int );
void newConnection( int socket );
protected:
- bool checkUser( const QString& user );
- bool checkPassword( const QString& pw );
bool checkReadFile( const QString& file );
bool checkWriteFile( const QString& file );
bool parsePort( const QString& pw );
bool backupRestoreGzip( const QString &file, QStringList &targets );
bool backupRestoreGzip( const QString &file );
bool sendList( const QString& arg );
void sendFile( const QString& file );
void retrieveFile( const QString& file );
QString permissionString( QFileInfo *info );
QString fileListing( QFileInfo *info );
QString absFilePath( const QString& file );
void timerEvent( QTimerEvent *e );
private:
State state;
Q_UINT16 peerport;
QHostAddress peeraddress;
bool passiv;
bool wait[4];
ServerDTP *dtp;
ServerSocket *serversocket;
QString waitfile;
QDir directory;
QByteArray waitarray;
QString renameFrom;
QString lastCommand;
int waitsocket;
};
-
-bool accessAuthorized(QHostAddress peeraddress);