| -rw-r--r-- | noncore/net/wellenreiter/gui/scanlist.cpp | 4 | ||||
| -rw-r--r-- | noncore/net/wellenreiter/gui/wellenreiter.cpp | 2 |
2 files changed, 3 insertions, 3 deletions
diff --git a/noncore/net/wellenreiter/gui/scanlist.cpp b/noncore/net/wellenreiter/gui/scanlist.cpp index ed9ec14..c605111 100644 --- a/noncore/net/wellenreiter/gui/scanlist.cpp +++ b/noncore/net/wellenreiter/gui/scanlist.cpp @@ -284,284 +284,284 @@ void MScanListView::toDStraffic( const OMacAddress& from, const OMacAddress& to, addIfNotExisting( static_cast<MScanListItem*>(item->parent()), from, "adhoc" ); } else { odebug << "D'Oh! Station without AP... ignoring for now... will handle this in 1.1 :-D" << oendl; MLogWindow::logwindow()->log( "WARNING: Unhandled toDS traffic!" ); } } void MScanListView::fromDStraffic( const OMacAddress& from, const OMacAddress& to, const OMacAddress& via ) { QString s; MScanListItem* network; QListViewItemIterator it( this ); while ( it.current() && it.current()->text( col_ap ) != via.toString(true) ) ++it; MScanListItem* item = static_cast<MScanListItem*>( it.current() ); if ( item ) // AP has shown up yet, so just add our new "from" - station { addIfNotExisting( static_cast<MScanListItem*>(item->parent()), from, "station" ); } else { odebug << "D'Oh! Station without AP... ignoring for now... will handle this in 1.1 :-D" << oendl; MLogWindow::logwindow()->log( "WARNING: Unhandled fromDS traffic!" ); } } void MScanListView::IBSStraffic( const OMacAddress& from, const OMacAddress& to, const OMacAddress& via ) { owarn << "D'oh! Not yet implemented..." << oendl; MLogWindow::logwindow()->log( "WARNING: Unhandled IBSS traffic!" ); } void MScanListView::identify( const OMacAddress& macaddr, const QString& ip ) { odebug << "identify " << (const char*) macaddr.toString() << " = " << ip << "" << oendl; QListViewItemIterator it( this ); for ( ; it.current(); ++it ) { if ( it.current()->text( col_ap ) == macaddr.toString(true) ) { it.current()->setText( col_ip, ip ); return; } } odebug << "D'oh! Received identification, but item not yet in list... ==> Handle this!" << oendl; MLogWindow::logwindow()->log( QString().sprintf( "WARNING: Unhandled identification %s = %s!", (const char*) macaddr.toString(), (const char*) ip ) ); } void MScanListView::addService( const QString& name, const OMacAddress& macaddr, const QString& ip ) { odebug << "addService '" << (const char*) name << "', Server = " << (const char*) macaddr.toString() << " = " << ip << "" << oendl; //TODO: Refactor that out, we need it all over the place. // Best to do it in a more comfortable abstraction in OListView // (Hmm, didn't I already start something in this direction?) QListViewItemIterator it( this ); for ( ; it.current(); ++it ) { if ( it.current()->text( col_ap ) == macaddr.toString(true) ) { MScanListItem* subitem = static_cast<MScanListItem*>( it.current()->firstChild() ); while ( subitem && ( subitem->text( col_essid ) != name ) ) { #ifdef DEBUG odebug << "subitemtext: " << subitem->text( col_essid ) << "" << oendl; #endif subitem = static_cast<MScanListItem*> ( subitem->nextSibling() ); } if ( subitem ) { // we have already seen this item, it's a dupe #ifdef DEBUG odebug << "" << name << " is a dupe - ignoring..." << oendl; #endif subitem->receivedBeacon(); //FIXME: sent data bit return; } // never seen that - add new item MScanListItem* item = new MScanListItem( it.current(), "service", "N/A", " ", false, -1, -1 ); item->setText( col_essid, name ); return; } } odebug << "D'oh! Received identification, but item not yet in list... ==> Handle this!" << oendl; MLogWindow::logwindow()->log( QString().sprintf( "WARNING: Unhandled service addition %s = %s!", (const char*) macaddr.toString(), (const char*) ip ) ); } void MScanListView::contextMenuRequested( QListViewItem* item, const QPoint&, int col ) { if ( !item ) return; MScanListItem* itm = static_cast<MScanListItem*>( item ); qDebug( "contextMenuRequested on item '%s' (%s) in column: '%d'", (const char*) itm->text(0), (const char*) itm->type, col ); if ( itm->type == "adhoc" || itm->type == "managed" ) { QString entry = QString().sprintf( "&Join %s Net '%s'...", (const char*) itm->type, (const char*) itm->essid() ); QPopupMenu m( this ); m.insertItem( entry, 37773, 0 ); int result = m.exec( QCursor::pos() ); if ( result == 37773 ) emit joinNetwork( itm->type, itm->essid(), itm->channel(), itm->macaddr() ); } } //============================================================ // MScanListItem //============================================================ MScanListItem::MScanListItem( QListView* parent, const QString& type, const QString& essid, const QString& macaddr, bool wep, int channel, int signal, bool probed ) :OListViewItem( parent, essid, QString::null, macaddr, QString::null, QString::null ), _type( type ), _essid( essid ), _macaddr( macaddr ), _wep( wep ), _channel( channel ), _signal( signal ), _beacons( 1 ) { #ifdef DEBUG odebug << "creating scanlist item" << oendl; #endif if ( WellenreiterConfigWindow::instance() ) WellenreiterConfigWindow::instance()->performAction( type, essid, macaddr, wep, channel, signal ); // better use signal/slot combination here decorateItem( type, essid, macaddr, wep, channel, signal, probed ); } MScanListItem::MScanListItem( QListViewItem* parent, const QString& type, const QString& essid, const QString& macaddr, bool wep, int channel, int signal ) :OListViewItem( parent, essid, QString::null, macaddr, QString::null, QString::null ) { #ifdef DEBUG odebug << "creating scanlist item" << oendl; #endif if ( WellenreiterConfigWindow::instance() ) WellenreiterConfigWindow::instance()->performAction( type, essid, macaddr, wep, channel, signal ); // better use signal/slot combination here decorateItem( type, essid, macaddr, wep, channel, signal, false ); } const QString& MScanListItem::essid() const { if ( type == "network" ) return _essid; else return ( (MScanListItem*) parent() )->essid(); } OListViewItem* MScanListItem::childFactory() { return new MScanListItem( this ); } void MScanListItem::serializeTo( QDataStream& s ) const { #ifdef DEBUG odebug << "serializing MScanListItem" << oendl; #endif OListViewItem::serializeTo( s ); s << _type; s << (Q_UINT8) ( _wep ? 'y' : 'n' ); } void MScanListItem::serializeFrom( QDataStream& s ) { #ifdef DEBUG odebug << "serializing MScanListItem" << oendl; #endif OListViewItem::serializeFrom( s ); - char wep; + Q_UINT8 wep; s >> _type; - s >> (Q_UINT8) wep; + s >> wep; _wep = (wep == 'y'); QString name; name.sprintf( "wellenreiter/%s", (const char*) _type ); setPixmap( col_type, Resource::loadPixmap( name ) ); if ( _wep ) setPixmap( col_wep, Resource::loadPixmap( "wellenreiter/cracked" ) ); //FIXME: rename the pixmap! listView()->triggerUpdate(); } void MScanListItem::decorateItem( QString type, QString essid, QString macaddr, bool wep, int channel, int signal, bool probed ) { #ifdef DEBUG qDebug( "decorating scanlist item %s / %s / %s [%d]", (const char*) type, (const char*) essid, (const char*) macaddr, channel ); #endif // set icon for managed or adhoc mode QString name; name.sprintf( "wellenreiter/%s", (const char*) type ); setPixmap( col_type, Resource::loadPixmap( name ) ); // special case for probed networks FIXME: This is ugly at present if ( type == "network" && probed ) { setPixmap( col_type, Resource::loadPixmap( "wellenreiter/network-probed.png" ) ); } // set icon for wep (wireless encryption protocol) if ( wep ) setPixmap( col_wep, Resource::loadPixmap( "wellenreiter/cracked" ) ); //FIXME: rename the pixmap! // set channel and signal text if ( signal != -1 ) setText( col_sig, QString::number( signal ) ); if ( channel != -1 ) setText( col_channel, QString::number( channel ) ); setText( col_firstseen, QTime::currentTime().toString() ); //setText( col_lastseen, QTime::currentTime().toString() ); listView()->triggerUpdate(); this->type = type; _type = type; _essid = essid; _macaddr = macaddr; _channel = channel; _beacons = 1; _signal = 0; if ( WellenreiterConfigWindow::instance()->openTree->isChecked() ) { listView()->ensureItemVisible( this ); } } void MScanListItem::setManufacturer( const QString& manufacturer ) { setText( col_manuf, manufacturer ); } void MScanListItem::setLocation( const QString& location ) { setText( col_location, location ); } void MScanListItem::receivedBeacon() { _beacons++; #ifdef DEBUG odebug << "MScanListItem " << _macaddr << ": received beacon #" << _beacons << "" << oendl; #endif setText( col_sig, QString::number( _beacons ) ); setText( col_lastseen, QTime::currentTime().toString() ); MScanListItem* p = (MScanListItem*) parent(); if ( p ) p->receivedBeacon(); } diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp index 822bde8..40cd105 100644 --- a/noncore/net/wellenreiter/gui/wellenreiter.cpp +++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp @@ -397,329 +397,329 @@ void Wellenreiter::receivePacket( OPacket* p ) // check for a control frame OWaveLanControlPacket* control = static_cast<OWaveLanControlPacket*>( childIfToParse( p, "802.11 Control" ) ); if ( control ) { handleControlFrame( p, control ); return; } OMacAddress source; OMacAddress dest; //TODO: WEP check here // check for a wireless data frame OWaveLanDataPacket* wlan = static_cast<OWaveLanDataPacket*>( childIfToParse( p, "802.11 Data" ) ); if ( wlan ) { handleWlanData( p, wlan, source, dest ); } // check for a wired data frame OEthernetPacket* eth = static_cast<OEthernetPacket*>( childIfToParse( p, "Ethernet" ) ); if ( eth ) { handleEthernetData( p, eth, source, dest ); } // check for an arp frame since arp frames come in two flavours: // 802.11 encapsulates ARP data within IP packets while wired ethernet doesn't. OARPPacket* arp = static_cast<OARPPacket*>( childIfToParse( p, "ARP" ) ); if ( arp ) { handleARPData( p, arp, source, dest ); } // check for a ip frame OIPPacket* ip = static_cast<OIPPacket*>( childIfToParse( p, "IP" ) ); if ( ip ) { handleIPData( p, ip, source, dest ); } //handleNotification( p ); } void Wellenreiter::stopClicked() { if ( iface ) { disconnect( SIGNAL( receivedPacket(Opie::Net::OPacket*) ), this, SLOT( receivePacket(Opie::Net::OPacket*) ) ); disconnect( SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) ); iface->setChannelHopping(); // stop hopping channels } else killTimers(); pcap->close(); sniffing = false; if ( iface ) { // switch off monitor mode iface->setMode( "managed" ); // switch off promisc flag iface->setPromiscuousMode( false ); system( "cardctl reset; sleep 1" ); //FIXME: Use OProcess } logwindow->log( "(i) Stopped Scanning." ); assert( parent() ); ( (QMainWindow*) parent() )->setCaption( "Wellenreiter II" ); // message the user QMessageBox::information( this, "Wellenreiter II", tr( "Your wireless card\nshould now be usable again." ) ); sniffing = false; emit( stoppedSniffing() ); #ifdef QWS if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() ) { QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Enable; } #else #warning FIXME: setScreenSaverMode is not operational on the X11 build #endif // print out statistics for( QMap<QString,int>::ConstIterator it = pcap->statistics().begin(); it != pcap->statistics().end(); ++it ) statwindow->updateCounter( it.key(), it.data() ); } void Wellenreiter::startClicked() { // get configuration from config window const QString& interface = configwindow->interfaceName->currentText(); const int cardtype = configwindow->driverType(); const int interval = configwindow->hoppingInterval(); if ( ( interface == "" ) || ( cardtype == 0 ) ) { QMessageBox::information( this, "Wellenreiter II", tr( "Your device is not\nproperly configured. Please reconfigure!" ) ); return; } // configure device ONetwork* net = ONetwork::instance(); // TODO: check if interface is wireless and support sniffing for non-wireless interfaces if ( cardtype != DEVTYPE_FILE ) { if ( !net->isPresent( interface ) ) { QMessageBox::information( this, "Wellenreiter II", tr( "The configured device (%1)\nis not available on this system\n. Please reconfigure!" ).arg( interface ) ); return; } iface = static_cast<OWirelessNetworkInterface*>(net->interface( interface )); // fails if network is not wireless! assert( iface ); // bring device UP iface->setUp( true ); if ( !iface->isUp() ) { QMessageBox::warning( this, "Wellenreiter II", tr( "Can't bring interface '%1' up:\n" ).arg( iface->name() ) + strerror( errno ) ); return; } } // set monitor mode bool usePrism = configwindow->usePrismHeader(); switch ( cardtype ) { case DEVTYPE_CISCO: iface->setMonitoring( new OCiscoMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_WLAN_NG: iface->setMonitoring( new OWlanNGMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_HOSTAP: iface->setMonitoring( new OHostAPMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_ORINOCO: iface->setMonitoring( new OOrinocoMonitoringInterface( iface, usePrism ) ); break; case DEVTYPE_MANUAL: QMessageBox::information( this, "Wellenreiter II", tr( "Bring your device into\nmonitor mode now." ) ); break; case DEVTYPE_FILE: odebug << "Wellenreiter: Capturing from file '" << interface << "'" << oendl; break; default: assert( 0 ); // shouldn't reach this } // switch device into monitor mode if ( cardtype < DEVTYPE_FILE ) { if ( cardtype != DEVTYPE_MANUAL ) iface->setMode( "monitor" ); if ( iface->mode() != "monitor" ) { if ( QMessageBox::warning( this, "Wellenreiter II", tr( "Can't set interface '%1'\ninto monitor mode:\n" ).arg( iface->name() ) + strerror( errno ) + tr( "\nContinue with limited functionality?" ), QMessageBox::Yes, QMessageBox::No ) == QMessageBox::No ) return; } } // open GPS device if ( configwindow->enableGPS->isChecked() ) { odebug << "Wellenreiter:GPS enabled @ " << configwindow->gpsdHost->currentText() << ":" << configwindow->gpsdPort->value() << "" << oendl; gps->open( configwindow->gpsdHost->currentText(), configwindow->gpsdPort->value() ); } // open pcap and start sniffing if ( configwindow->writeCaptureFile->isChecked() ) // write to a user specified capture file? { dumpname = configwindow->captureFileName->text(); if ( dumpname.isEmpty() ) dumpname = "captureFile"; dumpname.append( '-' ); dumpname.append( QTime::currentTime().toString().replace( QRegExp( ":" ), "-" ) ); dumpname.append( ".wellenreiter" ); } else // write it anyway ;) { dumpname = "/var/log/dump.wellenreiter"; } if ( cardtype != DEVTYPE_FILE ) pcap->open( interface ); else - pcap->open( QFile( interface ) ); + pcap->openCaptureFile( interface ); odebug << "Wellenreiter:: dumping to " << dumpname << "" << oendl; pcap->openDumpFile( dumpname ); if ( !pcap->isOpen() ) { QMessageBox::warning( this, "Wellenreiter II", tr( "Can't open packet capturer for\n'%1':\n" ).arg( cardtype == DEVTYPE_FILE ? (const char*) interface : iface->name() ) + QString(strerror( errno ) )); return; } // set capturer to non-blocking mode pcap->setBlocking( false ); // start channel hopper if ( cardtype != DEVTYPE_FILE ) { logwindow->log( QString().sprintf( "(i) Starting channel hopper (d=%d ms)", configwindow->hopInterval->value() ) ); iface->setChannelHopping( configwindow->hopInterval->value() ); //use interval from config window } if ( cardtype != DEVTYPE_FILE ) { // connect socket notifier and start channel hopper connect( pcap, SIGNAL( receivedPacket(Opie::Net::OPacket*) ), this, SLOT( receivePacket(Opie::Net::OPacket*) ) ); connect( iface->channelHopper(), SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) ); } else { // start timer for reading packets startTimer( 100 ); } logwindow->log( "(i) Started Scanning." ); sniffing = true; #ifdef QWS if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() ) { QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Disable; } #else #warning FIXME: setScreenSaverMode is not operational on the X11 build #endif emit( startedSniffing() ); if ( cardtype != DEVTYPE_FILE ) channelHopped( 6 ); // set title else { assert( parent() ); ( (QMainWindow*) parent() )->setCaption( tr( "Wellenreiter II - replaying capture file..." ) ); } } void Wellenreiter::timerEvent( QTimerEvent* ) { odebug << "Wellenreiter::timerEvent()" << oendl; OPacket* p = pcap->next(); if ( !p ) // no more packets available { stopClicked(); } else { receivePacket( p ); // We no longer delete packets here. Ownership of the packets is // transferred to the PacketView. //delete p; } } void Wellenreiter::doAction( const QString& action, const QString& protocol, OPacket* p ) { #ifdef QWS if ( action == "TouchSound" ) ODevice::inst()->playTouchSound(); else if ( action == "AlarmSound" ) ODevice::inst()->playAlarmSound(); else if ( action == "KeySound" ) ODevice::inst()->playKeySound(); else if ( action == "LedOn" ) ODevice::inst()->setLedState( Led_Mail, Led_On ); else if ( action == "LedOff" ) ODevice::inst()->setLedState( Led_Mail, Led_Off ); else if ( action == "LogMessage" ) logwindow->log( QString().sprintf( "Got packet with protocol '%s'", (const char*) protocol ) ); else if ( action == "MessageBox" ) QMessageBox::information( this, "Notification!", QString().sprintf( "Got packet with protocol '%s'", (const char*) protocol ) ); #else #warning Actions do not work with Qt/X11 yet #endif } void Wellenreiter::joinNetwork(const QString& type, const QString& essid, int channel, const QString& macaddr) { #ifdef QWS if ( !iface ) { QMessageBox::warning( this, tr( "Can't do that!" ), tr( "No wireless\ninterface available." ) ); return; } if ( sniffing ) { QMessageBox::warning( this, tr( "Can't do that!" ), tr( "Stop sniffing before\njoining a net." ) ); return; } qDebug( "joinNetwork() with Interface %s: %s, %s, %d, %s", (const char*) iface->name(), (const char*) type, (const char*) essid, channel, (const char*) macaddr ); QCopEnvelope msg( "QPE/Application/networksettings", "wlan(QString,QString,QString)" ); int count = 3; odebug << "sending " << count << " messages" << oendl; msg << QString("count") << QString::number(count); odebug << "msg >" << iface->name() << "< Mode >" << type.latin1() << "<" << oendl; msg << QString(iface->name()) << QString("Mode") << type; odebug << "msg >" << iface->name() << "< essid >" << essid.latin1() << "<" << oendl; msg << QString(iface->name()) << QString("ESSID") << essid; odebug << "msg >" << iface->name() << "< channel >" << channel << "<" << oendl; msg << QString(iface->name()) << QString("Channel") << channel; // odebug << "msg >" << iface->name() << "< mac >" << macaddr << "<" << oendl; // msg << QString(iface->name()) << QString("MacAddr") << macaddr; #else QMessageBox::warning( this, tr( "Can't do that!" ), tr( "Function only available on Embedded build" ) ); #endif } |