summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--core/settings/security/security.cpp100
-rw-r--r--core/settings/security/security.h7
-rw-r--r--core/settings/security/securitybase.ui202
3 files changed, 228 insertions, 81 deletions
diff --git a/core/settings/security/security.cpp b/core/settings/security/security.cpp
index 1b90121..d7871b3 100644
--- a/core/settings/security/security.cpp
+++ b/core/settings/security/security.cpp
@@ -13,118 +13,158 @@
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#include "security.h"
#include <qpe/qpeapplication.h>
#include <qpe/config.h>
#include <qpe/password.h>
#include <qpe/qpedialog.h>
#include <qpe/qcopenvelope_qws.h>
#include <qcheckbox.h>
#include <qpushbutton.h>
#include <qcombobox.h>
#include <qmessagebox.h>
#include <qfile.h>
#include <qlistview.h>
#include <qtextstream.h>
Security::Security( QWidget* parent, const char* name, WFlags fl )
-: SecurityBase( parent, name, TRUE, fl )
+: SecurityBase( parent, name, TRUE, WStyle_ContextHelp )
{
valid=FALSE;
Config cfg("Security");
cfg.setGroup("Passcode");
passcode = cfg.readEntry("passcode");
passcode_poweron->setChecked(cfg.readBoolEntry("passcode_poweron",FALSE));
cfg.setGroup("Sync");
int auth_peer = cfg.readNumEntry("auth_peer",0xc0a88100);//new default 192.168.129.0/24
int auth_peer_bits = cfg.readNumEntry("auth_peer_bits",24);
- selectNet(auth_peer,auth_peer_bits);
+ selectNet(auth_peer,auth_peer_bits,TRUE);
+
connect(syncnet, SIGNAL(textChanged(const QString&)),
this, SLOT(setSyncNet(const QString&)));
cfg.setGroup("Sync");
QString sa = cfg.readEntry("syncapp","Qtopia");
- //There must be a better way to do that...
for (int i=0; i<syncapp->count(); i++) {
if ( syncapp->text(i) == sa ) {
syncapp->setCurrentItem(i);
}
}
/*
cfg.setGroup("Remote");
if ( telnetAvailable() )
telnet->setChecked(cfg.readEntry("allow_telnet"));
else
telnet->hide();
if ( sshAvailable() )
ssh->setChecked(cfg.readEntry("allow_ssh"));
else
ssh->hide();
*/
QString configFile = QPEApplication::qpeDir() + "/etc/opie-login.conf";
Config loginCfg(configFile,Config::File);
loginCfg.setGroup("General");
autoLoginName=loginCfg.readEntry("AutoLogin","");
if (autoLoginName.stripWhiteSpace().isEmpty()) {
autoLogin=false;
} else {
autoLogin=true;
}
cfg.setGroup("SyncMode");
int mode = cfg.readNumEntry("Mode",2); // Default to Sharp
syncModeCombo->setCurrentItem( mode - 1 );
+
+ //since nobody knows what this is and it doesn't do anything, i'll hide it # CoreDump
+ // is this work-in-progress or can it be removed?
+ syncModeCombo->hide();
connect(autologinToggle, SIGNAL(toggled(bool)), this, SLOT(toggleAutoLogin(bool)));
connect(userlist, SIGNAL(activated(int)), this, SLOT(changeLoginName(int)));
connect(changepasscode,SIGNAL(clicked()), this, SLOT(changePassCode()));
connect(clearpasscode,SIGNAL(clicked()), this, SLOT(clearPassCode()));
connect(syncapp,SIGNAL(activated(int)), this, SLOT(changeSyncApp()));
+ connect(restoredefaults,SIGNAL(clicked()), this, SLOT(restoreDefaults()));
+ connect(deleteentry,SIGNAL(clicked()), this, SLOT(deleteListEntry()));
loadUsers();
updateGUI();
dl = new QPEDialogListener(this);
showMaximized();
}
Security::~Security()
{
}
+void Security::deleteListEntry()
+{
+ syncnet->removeItem(syncnet->currentItem());
+}
+
+void Security::restoreDefaults()
+{
+ QMessageBox unrecbox(
+ tr("Attention"),
+ tr( "<p>All user-defined net ranges will be lost."),
+ QMessageBox::Warning,
+ QMessageBox::Cancel, QMessageBox::Yes, QMessageBox::NoButton,
+ 0, QString::null, TRUE, WStyle_StaysOnTop);
+ unrecbox.setButtonText(QMessageBox::Cancel, tr("Cancel"));
+ unrecbox.setButtonText(QMessageBox::Yes, tr("Ok"));
+
+ if ( unrecbox.exec() == QMessageBox::Yes)
+ {
+ syncnet->clear();
+ insertDefaultRanges();
+ }
+}
+
+void Security::insertDefaultRanges()
+{
+ syncnet->insertItem( tr( "192.168.129.0/24" ) );
+ syncnet->insertItem( tr( "192.168.1.0/24" ) );
+ syncnet->insertItem( tr( "192.168.0.0/16" ) );
+ syncnet->insertItem( tr( "172.16.0.0/12" ) );
+ syncnet->insertItem( tr( "10.0.0.0/8" ) );
+ syncnet->insertItem( tr( "1.0.0.0/8" ) );
+ syncnet->insertItem( tr( "Any" ) );
+ syncnet->insertItem( tr( "None" ) );
+}
void Security::updateGUI()
{
bool empty = passcode.isEmpty();
changepasscode->setText( empty ? tr("Set passcode" )
: tr("Change passcode" ) );
passcode_poweron->setEnabled( !empty );
clearpasscode->setEnabled( !empty );
autologinToggle->setChecked(autoLogin);
userlist->setEnabled(autoLogin);
}
void Security::show()
{
//valid=FALSE;
setEnabled(FALSE);
SecurityBase::show();
if ( passcode.isEmpty() ) {
// could insist...
//changePassCode();
//if ( passcode.isEmpty() )
@@ -137,63 +177,101 @@ void Security::show()
QMessageBox::critical(this, tr("Passcode incorrect"),
tr("The passcode entered is incorrect.\nAccess denied"));
reject();
return;
}
}
}
setEnabled(TRUE);
valid=TRUE;
}
void Security::accept()
{
applySecurity();
QDialog::accept();
QCopEnvelope env("QPE/System", "securityChanged()" );
}
void Security::done(int r)
{
QDialog::done(r);
close();
}
-void Security::selectNet(int auth_peer,int auth_peer_bits)
+void Security::selectNet(int auth_peer,int auth_peer_bits, bool update)
{
QString sn;
if ( auth_peer_bits == 0 && auth_peer == 0 ) {
sn = tr("Any");
} else if ( auth_peer_bits == 32 && auth_peer == 0 ) {
sn = tr("None");
} else {
sn =
QString::number((auth_peer>>24)&0xff) + "."
+ QString::number((auth_peer>>16)&0xff) + "."
+ QString::number((auth_peer>>8)&0xff) + "."
+ QString::number((auth_peer>>0)&0xff) + "/"
+ QString::number(auth_peer_bits);
}
+
+ //insert user-defined list of netranges upon start
+ if (update) {
+ //User selected/active netrange first
+ syncnet->insertItem( tr( sn ) );
+
+ Config cfg("Security");
+ cfg.setGroup("Sync");
+
+ //set up defaults if needed, if someone manually deletes net0 he'll get a suprise hehe
+ QString test = cfg.readEntry("net0","");
+ if (test.isEmpty()) {
+ insertDefaultRanges();
+ } else {
+ // 10 ought to be enough for everybody... :)
+ // If you need more, don't forget to edit applySecurity() as well
+ bool already_there=FALSE;
+ for (int i=0; i<10; i++) {
+ QString target, netrange;
+ target.sprintf("net%d", i);
+ netrange = cfg.readEntry(target,"");
+ if (! netrange.isEmpty()){
+ //make sure we have no "twin" entries
+ for (int i=0; i<syncnet->count(); i++) {
+ if ( syncnet->text(i) == netrange ) {
+ already_there=TRUE;
+ }
+ }
+ if (! already_there) {
+ syncnet->insertItem( tr( netrange ) );
+ } else {
+ already_there=FALSE;
+ }
+ }
+ }
+ }
+ }
+
for (int i=0; i<syncnet->count(); i++) {
if ( syncnet->text(i).left(sn.length()) == sn ) {
syncnet->setCurrentItem(i);
return;
}
}
qDebug("No match for \"%s\"",sn.latin1());
}
void Security::parseNet(const QString& sn,int& auth_peer,int& auth_peer_bits)
{
auth_peer=0;
if ( sn == tr("Any") ) {
auth_peer = 0;
auth_peer_bits = 0;
} else if ( sn == tr("None") ) {
auth_peer = 0;
auth_peer_bits = 32;
} else {
int x=0;
for (int i=0; i<4; i++) {
int nx = sn.find(QChar(i==3 ? '/' : '.'),x);
auth_peer = (auth_peer<<8)|sn.mid(x,nx-x).toInt();
x = nx+1;
@@ -221,65 +299,75 @@ void Security::loadUsers ( void )
if ( *account.at(0) == autoLoginName)
userlist->setCurrentItem(userlist->count()-1);
}
}
passwd.close();
}
}
void Security::toggleAutoLogin(bool val)
{
autoLogin=val;
userlist->setEnabled(val);
if (!autoLogin)
autoLoginName=userlist->currentText();
}
void Security::setSyncNet(const QString& sn)
{
int auth_peer,auth_peer_bits;
parseNet(sn,auth_peer,auth_peer_bits);
- selectNet(auth_peer,auth_peer_bits);
+ selectNet(auth_peer,auth_peer_bits,FALSE);
}
void Security::applySecurity()
{
if ( valid ) {
Config cfg("Security");
cfg.setGroup("Passcode");
cfg.writeEntry("passcode",passcode);
cfg.writeEntry("passcode_poweron",passcode_poweron->isChecked());
cfg.setGroup("Sync");
int auth_peer=0;
int auth_peer_bits;
QString sn = syncnet->currentText();
parseNet(sn,auth_peer,auth_peer_bits);
+
+ //this is the *selected* (active) net range
cfg.writeEntry("auth_peer",auth_peer);
- cfg.writeEntry("auth_peer_bits",auth_peer_bits);
+ cfg.writeEntry("auth_peer_bits",auth_peer_bits);
+
+ //write back all other net ranges in *cleartext*
+ for (int i=0; i<10; i++) {
+ QString target;
+ target.sprintf("net%d", i);
+ cfg.writeEntry(target,syncnet->text(i));
+ }
+
cfg.writeEntry("syncapp",syncapp->currentText());
/*
cfg.setGroup("Remote");
if ( telnetAvailable() )
cfg.writeEntry("allow_telnet",telnet->isChecked());
if ( sshAvailable() )
cfg.writeEntry("allow_ssh",ssh->isChecked());
// ### write ssh/telnet sys config files
*/
QString configFile = QPEApplication::qpeDir() + "/etc/opie-login.conf";
Config loginCfg(configFile,Config::File);
loginCfg.setGroup("General");
if (autoLogin) {
loginCfg.writeEntry("AutoLogin",autoLoginName);
} else {
loginCfg.removeEntry("AutoLogin");
}
}
}
void Security::changeSyncApp()
diff --git a/core/settings/security/security.h b/core/settings/security/security.h
index b1a3eca..72aa352 100644
--- a/core/settings/security/security.h
+++ b/core/settings/security/security.h
@@ -26,47 +26,50 @@ class QPEDialogListener;
class Security : public SecurityBase
{
Q_OBJECT
public:
static QString appName() { return QString::fromLatin1("security"); }
Security( QWidget* parent = 0, const char* name = 0, WFlags fl = 0 );
~Security();
void show();
protected:
void accept();
void applySecurity();
void done(int);
private slots:
void changePassCode();
void clearPassCode();
void setSyncNet(const QString&);
void changeLoginName(int);
void toggleAutoLogin(bool);
void changeSyncApp();
-
+ void restoreDefaults();
+ void insertDefaultRanges();
+ void deleteListEntry();
private:
void loadUsers(void);
bool telnetAvailable() const;
bool sshAvailable() const;
void updateGUI();
static void parseNet(const QString& sn,int& auth_peer,int& auth_peer_bits);
- void selectNet(int auth_peer,int auth_peer_bits);
+ void selectNet(int auth_peer,int auth_peer_bits,bool update);
+
QString enterPassCode(const QString&);
QString passcode;
bool valid;
bool autoLogin;
QString autoLoginName;
QPEDialogListener *dl;
};
#endif // SECURITY_H
diff --git a/core/settings/security/securitybase.ui b/core/settings/security/securitybase.ui
index 934111e..1769ae1 100644
--- a/core/settings/security/securitybase.ui
+++ b/core/settings/security/securitybase.ui
@@ -1,38 +1,38 @@
<!DOCTYPE UI><UI>
<class>SecurityBase</class>
<widget>
<class>QDialog</class>
<property stdset="1">
<name>name</name>
<cstring>SecurityBase</cstring>
</property>
<property stdset="1">
<name>geometry</name>
<rect>
<x>0</x>
<y>0</y>
- <width>321</width>
+ <width>309</width>
<height>483</height>
</rect>
</property>
<property stdset="1">
<name>caption</name>
<string>Security Settings</string>
</property>
<property>
<name>layoutMargin</name>
</property>
<property>
<name>layoutSpacing</name>
</property>
<vbox>
<property stdset="1">
<name>margin</name>
<number>0</number>
</property>
<property stdset="1">
<name>spacing</name>
<number>0</number>
</property>
<widget>
<class>QTabWidget</class>
@@ -88,72 +88,87 @@
<cstring>Layout1</cstring>
</property>
<property>
<name>layoutSpacing</name>
</property>
<hbox>
<property stdset="1">
<name>margin</name>
<number>0</number>
</property>
<property stdset="1">
<name>spacing</name>
<number>-1</number>
</property>
<widget>
<class>QPushButton</class>
<property stdset="1">
<name>name</name>
<cstring>changepasscode</cstring>
</property>
<property stdset="1">
<name>text</name>
<string>Change passcode</string>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>This button will let you change the security passcode.
+
+Note: This is *not* the sync password.</string>
+ </property>
</widget>
<widget>
<class>QPushButton</class>
<property stdset="1">
<name>name</name>
<cstring>clearpasscode</cstring>
</property>
<property stdset="1">
<name>text</name>
<string>Clear passcode</string>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>Delete the current passcode.
+You can enter a new one at any time.</string>
+ </property>
</widget>
</hbox>
</widget>
<widget>
<class>QCheckBox</class>
<property stdset="1">
<name>name</name>
<cstring>passcode_poweron</cstring>
</property>
<property stdset="1">
<name>text</name>
<string>Require pass code at power-on</string>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>If you enable this option, a passcode must be entered after every resume event of your Zaurus.</string>
+ </property>
</widget>
<widget>
<class>QLabel</class>
<property stdset="1">
<name>name</name>
<cstring>TextLabel1</cstring>
</property>
<property stdset="1">
<name>sizePolicy</name>
<sizepolicy>
<hsizetype>5</hsizetype>
<vsizetype>7</vsizetype>
</sizepolicy>
</property>
<property stdset="1">
<name>text</name>
<string>&lt;P&gt;Pass code protection provides a minimal level of protection from casual access to this device.</string>
</property>
<property stdset="1">
<name>textFormat</name>
<enum>RichText</enum>
</property>
<property stdset="1">
<name>alignment</name>
@@ -215,253 +230,294 @@
</property>
<property stdset="1">
<name>title</name>
<string>Login</string>
</property>
<vbox>
<property stdset="1">
<name>margin</name>
<number>11</number>
</property>
<property stdset="1">
<name>spacing</name>
<number>6</number>
</property>
<widget>
<class>QCheckBox</class>
<property stdset="1">
<name>name</name>
<cstring>autologinToggle</cstring>
</property>
<property stdset="1">
<name>text</name>
<string>Login Automatically</string>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>If you select this option, opie-login will automagically log you in with the user you have selected in the drop-down list.
+
+For the Zaurus 5x00 this is always the user "root".</string>
+ </property>
</widget>
<widget>
<class>QComboBox</class>
<property stdset="1">
<name>name</name>
<cstring>userlist</cstring>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>This drop-down list allows you to select the user for auto-login
+(if enabled above).
+
+You can only select an actually configured user.</string>
+ </property>
</widget>
</vbox>
</widget>
<spacer>
<property>
<name>name</name>
<cstring>Spacer2</cstring>
</property>
<property stdset="1">
<name>orientation</name>
<enum>Vertical</enum>
</property>
<property stdset="1">
<name>sizeType</name>
<enum>Expanding</enum>
</property>
<property>
<name>sizeHint</name>
<size>
<width>20</width>
<height>20</height>
</size>
</property>
</spacer>
</vbox>
</widget>
<widget>
<class>QWidget</class>
<property stdset="1">
<name>name</name>
<cstring>tab</cstring>
</property>
<attribute>
<name>title</name>
<string>Sync</string>
</attribute>
- <vbox>
+ <grid>
<property stdset="1">
<name>margin</name>
<number>11</number>
</property>
<property stdset="1">
<name>spacing</name>
<number>6</number>
</property>
- <widget>
+ <spacer row="1" column="0" >
+ <property>
+ <name>name</name>
+ <cstring>Spacer1</cstring>
+ </property>
+ <property stdset="1">
+ <name>orientation</name>
+ <enum>Vertical</enum>
+ </property>
+ <property stdset="1">
+ <name>sizeType</name>
+ <enum>Expanding</enum>
+ </property>
+ <property>
+ <name>sizeHint</name>
+ <size>
+ <width>20</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ <widget row="0" column="0" >
<class>QGroupBox</class>
<property stdset="1">
<name>name</name>
<cstring>GroupBox2</cstring>
</property>
<property stdset="1">
<name>title</name>
<string>Sync</string>
</property>
<vbox>
<property stdset="1">
<name>margin</name>
<number>11</number>
</property>
<property stdset="1">
<name>spacing</name>
<number>6</number>
</property>
<widget>
<class>QLabel</class>
<property stdset="1">
<name>name</name>
<cstring>TextLabel1_2</cstring>
</property>
<property stdset="1">
<name>text</name>
<string>Accept sync from network:</string>
</property>
<property stdset="1">
<name>textFormat</name>
<enum>RichText</enum>
</property>
</widget>
<widget>
<class>QComboBox</class>
- <item>
- <property>
- <name>text</name>
- <string>192.168.129.0/24 (default)</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>192.168.1.0/24</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>192.168.0.0/16</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>172.16.0.0/12</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>10.0.0.0/8</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>1.0.0.0/8</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>Any</string>
- </property>
- </item>
- <item>
- <property>
- <name>text</name>
- <string>None</string>
- </property>
- </item>
<property stdset="1">
<name>name</name>
<cstring>syncnet</cstring>
</property>
<property stdset="1">
<name>editable</name>
<bool>true</bool>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>Select a net-range or enter a new one.
+
+This drop-down list lets you select a net range which is allowed to connect to your Zaurus.
+
+For example, a net range of 192.168.1.0/24 will allow any machine with an IP between 192.168.1.1 and 192.168.1.254 to connect to (and sync with) your Zaurus.
+
+The entry "All" will allow *any* IP to connect.
+The entry "None" will *deny* any connection.
+
+If unsure, select "Any".</string>
+ </property>
+ </widget>
+ <widget>
+ <class>QLayoutWidget</class>
+ <property stdset="1">
+ <name>name</name>
+ <cstring>Layout4</cstring>
+ </property>
+ <hbox>
+ <property stdset="1">
+ <name>margin</name>
+ <number>0</number>
+ </property>
+ <property stdset="1">
+ <name>spacing</name>
+ <number>6</number>
+ </property>
+ <widget>
+ <class>QPushButton</class>
+ <property stdset="1">
+ <name>name</name>
+ <cstring>deleteentry</cstring>
+ </property>
+ <property stdset="1">
+ <name>text</name>
+ <string>Delete Entry</string>
+ </property>
+ <property>
+ <name>whatsThis</name>
+ <string>Delete the selected net range from the list
+
+If you press this button, the currently selected net range will be deleted from the list of net ranges.
+
+If you hit this button in error, the button "Restore Defaults" will restore
+the list to the state it has been when you initially booted your Zaurus.</string>
+ </property>
+ </widget>
+ <widget>
+ <class>QPushButton</class>
+ <property stdset="1">
+ <name>name</name>
+ <cstring>restoredefaults</cstring>
+ </property>
+ <property stdset="1">
+ <name>text</name>
+ <string>Restore Defaults</string>
+ </property>
+ <property>
+ <name>whatsThis</name>
+ <string>This button will restore the list of net ranges
+to the defaults.
+
+Beware that all manually entered net ranges will be lost!</string>
+ </property>
+ </widget>
+ </hbox>
</widget>
<widget>
<class>QLabel</class>
<property stdset="1">
<name>name</name>
<cstring>TextLabel2</cstring>
</property>
<property stdset="1">
<name>text</name>
<string>Select your sync software</string>
</property>
</widget>
<widget>
<class>QComboBox</class>
<item>
<property>
<name>text</name>
<string>QTopia</string>
</property>
</item>
<item>
<property>
<name>text</name>
<string>IntelliSync</string>
</property>
</item>
<property stdset="1">
<name>name</name>
<cstring>syncapp</cstring>
</property>
+ <property>
+ <name>whatsThis</name>
+ <string>This option changes the login behaviour of the internal FTP server.
+
+If you have problems syncing, try the "IntelliSync" setting, which will accept any password you throw at the sync (FTP) port.
+
+The default is Qtopia. It will let you log in with username "root" and password "Qtopia". The password is CaSeSeNsItIvE.</string>
+ </property>
</widget>
<widget>
<class>QComboBox</class>
<item>
<property>
<name>text</name>
<string>Qtopia 1.7</string>
</property>
</item>
<item>
<property>
<name>text</name>
<string>Opie 1.0</string>
</property>
</item>
<item>
<property>
<name>text</name>
<string>Both</string>
</property>
</item>
<property stdset="1">
<name>name</name>
<cstring>syncModeCombo</cstring>
</property>
</widget>
</vbox>
</widget>
- <spacer>
- <property>
- <name>name</name>
- <cstring>Spacer1</cstring>
- </property>
- <property stdset="1">
- <name>orientation</name>
- <enum>Vertical</enum>
- </property>
- <property stdset="1">
- <name>sizeType</name>
- <enum>Expanding</enum>
- </property>
- <property>
- <name>sizeHint</name>
- <size>
- <width>20</width>
- <height>20</height>
- </size>
- </property>
- </spacer>
- </vbox>
+ </grid>
</widget>
</widget>
</vbox>
</widget>
</UI>