10 files changed, 106 insertions, 10 deletions

diff --git a/noncore/net/networksetup/TODO b/noncore/net/networksetup/TODO
index 70d6717..7386646 100644
--- a/noncore/net/networksetup/TODO
+++ b/noncore/net/networksetup/TODO
@@ -1,7 +1,8 @@
 [ ] Wlanmodule needs to check if an interface supports wireless
     extensions.
 [x] When you set options in wlanmodule, hit OK, it exits all of
     networksetup, doesnt bring you back to the main screen.
 [x] Wlanmodule isnt writing out wireless.opts
 [ ] Need a means of bringing an interface up and down (calling
     out ifup/ifdown) from the gui.
+    -Ben- Click information, then click up or down... :-D
diff --git a/noncore/net/networksetup/interfaces.cpp b/noncore/net/networksetup/interfaces.cpp
index b8a3e7f..1287d90 100644
--- a/noncore/net/networksetup/interfaces.cpp
+++ b/noncore/net/networksetup/interfaces.cpp
@@ -19,52 +19,76 @@ Interfaces::Interfaces(QString useInterfacesFile){
   acceptedFamily.append(INTERFACES_FAMILY_IPX);
   acceptedFamily.append(INTERFACES_FAMILY_INET6);
         
   interfacesFile = useInterfacesFile;
   QFile file(interfacesFile);
   if (!file.open(IO_ReadOnly)){
     qDebug(QString("Interfaces: Can't open file: %1 for reading.").arg(interfacesFile).latin1());
     currentIface = interfaces.end();
     currentMapping = interfaces.end();
     return;
   }
   QTextStream stream( &file );
   QString line;
   while ( !stream.eof() ) {
     line += stream.readLine();
     line += "\n";
   }
   file.close();
   interfaces = QStringList::split("\n", line, true);
   
   currentIface = interfaces.end();
   currentMapping = interfaces.end();
 }
 
+
+/**
+ * Get a list of all interfaces in the interface file.  Usefull for
+ * hardware that is not currently connected such as an 802.11b card 
+ * not plugged in, but configured for when it is plugged in.
+ * @return Return string list of interfaces.
+ **/ 
+QStringList Interfaces::getInterfaceList(){
+  QStringList list;
+  for ( QStringList::Iterator it = interfaces.begin(); it != interfaces.end(); ++it ) {
+    QString line = (*it).simplifyWhiteSpace();
+    if(line.contains(IFACE)){
+      line = line.mid(QString(IFACE).length() +1, line.length());
+      line = line.simplifyWhiteSpace();
+      int findSpace = line.find(" ");
+      if( findSpace >= 0){
+        line = line.mid(0, findSpace);
+        list.append(line);
+      }
+    }
+  }
+  return list;
+}
+
 /**
  * Find out if interface is in an "auto" group or not.
  *  Report any duplicates such as eth0 being in two differnt auto's 
- * @param 
+ * @param interface interface to check to see if it is on or not.
  * @return true is interface is in auto
  */ 
 bool Interfaces::isAuto(QString interface){
   QStringList autoLines = interfaces.grep(QRegExp(AUTO));
   QStringList awi = autoLines.grep(QRegExp(interface));
   if(awi.count() > 1)
     qDebug(QString("Interfaces: Found more then auto group with interface: %1.").arg(interface).latin1());
   if(awi.count() < 1)
     return false;
   return true;
 }
 
 /**
  * Attempt to set the auto option for interface to setAuto.
  * @param interface the interface to set
  * @param setAuto the value to set interface to.
  * @return false if already set to setAuto.
  * */ 
 bool Interfaces::setAuto(QString interface, bool setAuto){
   // Don't need to set it if it is already set.
   if(isAuto(interface) == setAuto)
     return false;
   
   bool changed = false;
diff --git a/noncore/net/networksetup/interfaces.h b/noncore/net/networksetup/interfaces.h
index 2cc9689..8b4788c 100644
--- a/noncore/net/networksetup/interfaces.h
+++ b/noncore/net/networksetup/interfaces.h
@@ -2,49 +2,50 @@
 #define INTERFACES_H
 
 #include <qstring.h>
 #include <qstringlist.h>
 
 #define INTERFACES_LOOPBACK "loopback"
 
 #define INTERFACES_FAMILY_INET "inet"
 #define INTERFACES_FAMILY_IPX "ipx"
 #define INTERFACES_FAMILY_INET6 "inet6"
 
 #define INTERFACES_METHOD_DHCP "dhcp"
 #define INTERFACES_METHOD_STATIC "static"
 #define INTERFACES_METHOD_PPP "ppp"
 
 /**
  * This class provides a clean frontend for parsing the network interfaces file.
  * It provides helper functions to minipulate the options within the file.
  * See the interfaces man page for the syntax rules.
  */
 class Interfaces {
 
 public:
   Interfaces(QString useInterfacesFile = "/etc/network/interfaces");
-
+  QStringList getInterfaceList();
+  
   bool isAuto(QString interface);
   bool setAuto(QString interface, bool setAuto);
   
   bool removeInterface();
   bool addInterface(QString interface, QString family, QString method);
   bool setInterface(QString interface);
   bool isInterfaceSet();
   QString getInterfaceName(bool &error);
   bool setInterfaceName(QString newName);
   QString getInterfaceFamily(bool &error);
   bool setInterfaceFamily(QString newName);
   QString getInterfaceMethod(bool &error);
   bool setInterfaceMethod(QString newName);
   QString getInterfaceOption(QString option, bool &error); 
   bool setInterfaceOption(QString option, QString value);
   bool removeAllInterfaceOptions();
   
   bool setMapping(QString interface);
   void addMapping(QString interfaces);
   bool setMap(QString map, QString value);
   QString getMap(QString map, bool &error);
   bool setScript(QString);
   QString getScript(bool &error);
                   
diff --git a/noncore/net/networksetup/mainwindowimp.cpp b/noncore/net/networksetup/mainwindowimp.cpp
index 36f12e0..24af1ec 100644
--- a/noncore/net/networksetup/mainwindowimp.cpp
+++ b/noncore/net/networksetup/mainwindowimp.cpp
@@ -1,28 +1,30 @@
 #include "mainwindowimp.h"

 #include "addconnectionimp.h"

 #include "interfaceinformationimp.h"

 #include "interfacesetupimp.h"

+#include "interfaces.h"

+

 #include "module.h"

 

 #include "kprocess.h"

 

 #include <qpushbutton.h>

 #include <qtabwidget.h>

 #include <qlistbox.h>

 #include <qlineedit.h>

 #include <qlistview.h>

 #include <qheader.h>

 #include <qlabel.h>

 

 #include <qmainwindow.h>

 #include <qmessagebox.h>

 

 #include <qpe/config.h>

 #include <qpe/qlibrary.h>

 #include <qpe/resource.h>

 #include <qpe/qpeapplication.h>

 

 #include <qlist.h>

 #include <qdir.h>

 #include <qfile.h>

 #include <qtextstream.h>

@@ -311,82 +313,102 @@ void MainWindowImp::jobDone(KProcess *process){
       else{

         i = interfaceNames[interfaceName];

         if(fileName != TEMP_ALL)

           i->setStatus(true);

       }

       

       i->setAttached(true);

       i->setInterfaceName(interfaceName);

 

       QString hardName = "Ethernet";

       int hardwareName = line.find("Link encap:");

       int macAddress = line.find("HWaddr");

       if(macAddress == -1)

         macAddress = line.length();

       if(hardwareName != -1)

         i->setHardwareName(line.mid(hardwareName+11, macAddress-(hardwareName+11)) + QString(" (%1)").arg(i->getInterfaceName()));

       // We have found an interface

       //qDebug(QString("MainWindowImp: Found Interface: %1").arg(line).latin1());

       interfaceNames.insert(i->getInterfaceName(), i);

       updateInterface(i);

     }

   }

   file.close();

   QFile::remove(fileName);

+  if(threads.count() == 0){

+    Interfaces i;

+    QStringList list = i.getInterfaceList();

+    QMap<QString, Interface*>::Iterator it;

+    for ( QStringList::Iterator ni = list.begin(); ni != list.end(); ++ni ) {

+      for( it = interfaceNames.begin(); it != interfaceNames.end(); ++it ){

+        if(it.key() == (*ni)){

+          Interface *i = new Interface(*ni, false);

+          i->setAttached(false);

+          i->setHardwareName(QString("Disconnected (%1)").arg(*ni));

+          i->setInterfaceName(*ni);

+          interfaceNames.insert(i->getInterfaceName(), i);

+          updateInterface(i);

+        }

+      }

+    }

+  }

 } 

 

 /**

  * Update this interface.  If no QListViewItem exists create one.

  * @param Interface* pointer to the interface that needs to be updated.

  */ 

 void MainWindowImp::updateInterface(Interface *i){

   QListViewItem *item = NULL;

   

   // Find the interface, making it if needed.

   if(items.find(i) == items.end()){

     item = new QListViewItem(connectionList, "", "", "");

     // See if you can't find a module owner for this interface

     QMap<Module*, QLibrary*>::Iterator it;

     for( it = libraries.begin(); it != libraries.end(); ++it ){

       if(it.key()->isOwner(i))

         i->setModuleOwner(it.key());

     }

     items.insert(i, item);

     interfaceItems.insert(item, i);

   }

   else

     item = items[i];

  

   // Update the icons and information 

   item->setPixmap(0, (Resource::loadPixmap(i->getStatus() ? "up": "down")));

  

   QString typeName = "lan";

   if(i->getHardwareName().contains("Local Loopback"))

     typeName = "lo";

   if(i->getInterfaceName().contains("irda"))

     typeName = "irda";

   if(i->getInterfaceName().contains("wlan"))

     typeName = "wlan";

+  

+  if(!i->isAttached())

+    typeName = "connect_no";

   // Actually try to use the Module

   if(i->getModuleOwner() != NULL)

     typeName = i->getModuleOwner()->getPixmapName(i);

   

   item->setPixmap(1, (Resource::loadPixmap(typeName)));

   item->setText(2, i->getHardwareName());

   item->setText(3, (i->getStatus()) ? i->getIp() : QString(""));

 }

 

 void MainWindowImp::newProfileChanged(const QString& newText){

   if(newText.length() > 0)

    newProfileButton->setEnabled(true);

   else

     newProfileButton->setEnabled(false);

 }

 

 /**

  * Adds a new profile to the list of profiles.

  * Don't add profiles that already exists.

  * Appends to the list and QStringList

  */ 

 void MainWindowImp::addProfile(){

   QString newProfileName = newProfile->text();

   if(profiles.grep(newProfileName).count() > 0){

diff --git a/noncore/net/networksetup/networksetup.pro b/noncore/net/networksetup/networksetup.pro
index f09db93..441bbaa 100644
--- a/noncore/net/networksetup/networksetup.pro
+++ b/noncore/net/networksetup/networksetup.pro
@@ -1,11 +1,11 @@
-        DESTDIR         = $(OPIEDIR)/bin
+        #DESTDIR        = $(OPIEDIR)/bin
         TEMPLATE= app
         #CONFIG         = qt warn_on debug
         CONFIG  = qt warn_on release
         HEADERS         = mainwindowimp.h addconnectionimp.h interface.h interfaceinformationimp.h interfacesetupimp.h interfaces.h defaultmodule.h  kprocctrl.h module.h  kprocess.h
         SOURCES         = main.cpp mainwindowimp.cpp addconnectionimp.cpp interface.cpp interfaceinformationimp.cpp  interfacesetupimp.cpp kprocctrl.cpp kprocess.cpp interfaces.cpp
-        INCLUDEPATH+= $(OPIEDIR)/include
-        DEPENDPATH+= $(OPIEDIR)/include
+        #INCLUDEPATH+= $(OPIEDIR)/include
+        #DEPENDPATH+= $(OPIEDIR)/include
 LIBS            += -lqpe
         INTERFACES= mainwindow.ui addconnection.ui interfaceinformation.ui interfaceadvanced.ui interfacesetup.ui
         TARGET  = networksetup
diff --git a/noncore/settings/networksettings/TODO b/noncore/settings/networksettings/TODO
index 70d6717..7386646 100644
--- a/noncore/settings/networksettings/TODO
+++ b/noncore/settings/networksettings/TODO
@@ -1,7 +1,8 @@
 [ ] Wlanmodule needs to check if an interface supports wireless
     extensions.
 [x] When you set options in wlanmodule, hit OK, it exits all of
     networksetup, doesnt bring you back to the main screen.
 [x] Wlanmodule isnt writing out wireless.opts
 [ ] Need a means of bringing an interface up and down (calling
     out ifup/ifdown) from the gui.
+    -Ben- Click information, then click up or down... :-D
diff --git a/noncore/settings/networksettings/interfaces.cpp b/noncore/settings/networksettings/interfaces.cpp
index b8a3e7f..1287d90 100644
--- a/noncore/settings/networksettings/interfaces.cpp
+++ b/noncore/settings/networksettings/interfaces.cpp
@@ -19,52 +19,76 @@ Interfaces::Interfaces(QString useInterfacesFile){
   acceptedFamily.append(INTERFACES_FAMILY_IPX);
   acceptedFamily.append(INTERFACES_FAMILY_INET6);
         
   interfacesFile = useInterfacesFile;
   QFile file(interfacesFile);
   if (!file.open(IO_ReadOnly)){
     qDebug(QString("Interfaces: Can't open file: %1 for reading.").arg(interfacesFile).latin1());
     currentIface = interfaces.end();
     currentMapping = interfaces.end();
     return;
   }
   QTextStream stream( &file );
   QString line;
   while ( !stream.eof() ) {
     line += stream.readLine();
     line += "\n";
   }
   file.close();
   interfaces = QStringList::split("\n", line, true);
   
   currentIface = interfaces.end();
   currentMapping = interfaces.end();
 }
 
+
+/**
+ * Get a list of all interfaces in the interface file.  Usefull for
+ * hardware that is not currently connected such as an 802.11b card 
+ * not plugged in, but configured for when it is plugged in.
+ * @return Return string list of interfaces.
+ **/ 
+QStringList Interfaces::getInterfaceList(){
+  QStringList list;
+  for ( QStringList::Iterator it = interfaces.begin(); it != interfaces.end(); ++it ) {
+    QString line = (*it).simplifyWhiteSpace();
+    if(line.contains(IFACE)){
+      line = line.mid(QString(IFACE).length() +1, line.length());
+      line = line.simplifyWhiteSpace();
+      int findSpace = line.find(" ");
+      if( findSpace >= 0){
+        line = line.mid(0, findSpace);
+        list.append(line);
+      }
+    }
+  }
+  return list;
+}
+
 /**
  * Find out if interface is in an "auto" group or not.
  *  Report any duplicates such as eth0 being in two differnt auto's 
- * @param 
+ * @param interface interface to check to see if it is on or not.
  * @return true is interface is in auto
  */ 
 bool Interfaces::isAuto(QString interface){
   QStringList autoLines = interfaces.grep(QRegExp(AUTO));
   QStringList awi = autoLines.grep(QRegExp(interface));
   if(awi.count() > 1)
     qDebug(QString("Interfaces: Found more then auto group with interface: %1.").arg(interface).latin1());
   if(awi.count() < 1)
     return false;
   return true;
 }
 
 /**
  * Attempt to set the auto option for interface to setAuto.
  * @param interface the interface to set
  * @param setAuto the value to set interface to.
  * @return false if already set to setAuto.
  * */ 
 bool Interfaces::setAuto(QString interface, bool setAuto){
   // Don't need to set it if it is already set.
   if(isAuto(interface) == setAuto)
     return false;
   
   bool changed = false;
diff --git a/noncore/settings/networksettings/interfaces.h b/noncore/settings/networksettings/interfaces.h
index 2cc9689..8b4788c 100644
--- a/noncore/settings/networksettings/interfaces.h
+++ b/noncore/settings/networksettings/interfaces.h
@@ -2,49 +2,50 @@
 #define INTERFACES_H
 
 #include <qstring.h>
 #include <qstringlist.h>
 
 #define INTERFACES_LOOPBACK "loopback"
 
 #define INTERFACES_FAMILY_INET "inet"
 #define INTERFACES_FAMILY_IPX "ipx"
 #define INTERFACES_FAMILY_INET6 "inet6"
 
 #define INTERFACES_METHOD_DHCP "dhcp"
 #define INTERFACES_METHOD_STATIC "static"
 #define INTERFACES_METHOD_PPP "ppp"
 
 /**
  * This class provides a clean frontend for parsing the network interfaces file.
  * It provides helper functions to minipulate the options within the file.
  * See the interfaces man page for the syntax rules.
  */
 class Interfaces {
 
 public:
   Interfaces(QString useInterfacesFile = "/etc/network/interfaces");
-
+  QStringList getInterfaceList();
+  
   bool isAuto(QString interface);
   bool setAuto(QString interface, bool setAuto);
   
   bool removeInterface();
   bool addInterface(QString interface, QString family, QString method);
   bool setInterface(QString interface);
   bool isInterfaceSet();
   QString getInterfaceName(bool &error);
   bool setInterfaceName(QString newName);
   QString getInterfaceFamily(bool &error);
   bool setInterfaceFamily(QString newName);
   QString getInterfaceMethod(bool &error);
   bool setInterfaceMethod(QString newName);
   QString getInterfaceOption(QString option, bool &error); 
   bool setInterfaceOption(QString option, QString value);
   bool removeAllInterfaceOptions();
   
   bool setMapping(QString interface);
   void addMapping(QString interfaces);
   bool setMap(QString map, QString value);
   QString getMap(QString map, bool &error);
   bool setScript(QString);
   QString getScript(bool &error);
                   
diff --git a/noncore/settings/networksettings/mainwindowimp.cpp b/noncore/settings/networksettings/mainwindowimp.cpp
index 36f12e0..24af1ec 100644
--- a/noncore/settings/networksettings/mainwindowimp.cpp
+++ b/noncore/settings/networksettings/mainwindowimp.cpp
@@ -1,28 +1,30 @@
 #include "mainwindowimp.h"

 #include "addconnectionimp.h"

 #include "interfaceinformationimp.h"

 #include "interfacesetupimp.h"

+#include "interfaces.h"

+

 #include "module.h"

 

 #include "kprocess.h"

 

 #include <qpushbutton.h>

 #include <qtabwidget.h>

 #include <qlistbox.h>

 #include <qlineedit.h>

 #include <qlistview.h>

 #include <qheader.h>

 #include <qlabel.h>

 

 #include <qmainwindow.h>

 #include <qmessagebox.h>

 

 #include <qpe/config.h>

 #include <qpe/qlibrary.h>

 #include <qpe/resource.h>

 #include <qpe/qpeapplication.h>

 

 #include <qlist.h>

 #include <qdir.h>

 #include <qfile.h>

 #include <qtextstream.h>

@@ -311,82 +313,102 @@ void MainWindowImp::jobDone(KProcess *process){
       else{

         i = interfaceNames[interfaceName];

         if(fileName != TEMP_ALL)

           i->setStatus(true);

       }

       

       i->setAttached(true);

       i->setInterfaceName(interfaceName);

 

       QString hardName = "Ethernet";

       int hardwareName = line.find("Link encap:");

       int macAddress = line.find("HWaddr");

       if(macAddress == -1)

         macAddress = line.length();

       if(hardwareName != -1)

         i->setHardwareName(line.mid(hardwareName+11, macAddress-(hardwareName+11)) + QString(" (%1)").arg(i->getInterfaceName()));

       // We have found an interface

       //qDebug(QString("MainWindowImp: Found Interface: %1").arg(line).latin1());

       interfaceNames.insert(i->getInterfaceName(), i);

       updateInterface(i);

     }

   }

   file.close();

   QFile::remove(fileName);

+  if(threads.count() == 0){

+    Interfaces i;

+    QStringList list = i.getInterfaceList();

+    QMap<QString, Interface*>::Iterator it;

+    for ( QStringList::Iterator ni = list.begin(); ni != list.end(); ++ni ) {

+      for( it = interfaceNames.begin(); it != interfaceNames.end(); ++it ){

+        if(it.key() == (*ni)){

+          Interface *i = new Interface(*ni, false);

+          i->setAttached(false);

+          i->setHardwareName(QString("Disconnected (%1)").arg(*ni));

+          i->setInterfaceName(*ni);

+          interfaceNames.insert(i->getInterfaceName(), i);

+          updateInterface(i);

+        }

+      }

+    }

+  }

 } 

 

 /**

  * Update this interface.  If no QListViewItem exists create one.

  * @param Interface* pointer to the interface that needs to be updated.

  */ 

 void MainWindowImp::updateInterface(Interface *i){

   QListViewItem *item = NULL;

   

   // Find the interface, making it if needed.

   if(items.find(i) == items.end()){

     item = new QListViewItem(connectionList, "", "", "");

     // See if you can't find a module owner for this interface

     QMap<Module*, QLibrary*>::Iterator it;

     for( it = libraries.begin(); it != libraries.end(); ++it ){

       if(it.key()->isOwner(i))

         i->setModuleOwner(it.key());

     }

     items.insert(i, item);

     interfaceItems.insert(item, i);

   }

   else

     item = items[i];

  

   // Update the icons and information 

   item->setPixmap(0, (Resource::loadPixmap(i->getStatus() ? "up": "down")));

  

   QString typeName = "lan";

   if(i->getHardwareName().contains("Local Loopback"))

     typeName = "lo";

   if(i->getInterfaceName().contains("irda"))

     typeName = "irda";

   if(i->getInterfaceName().contains("wlan"))

     typeName = "wlan";

+  

+  if(!i->isAttached())

+    typeName = "connect_no";

   // Actually try to use the Module

   if(i->getModuleOwner() != NULL)

     typeName = i->getModuleOwner()->getPixmapName(i);

   

   item->setPixmap(1, (Resource::loadPixmap(typeName)));

   item->setText(2, i->getHardwareName());

   item->setText(3, (i->getStatus()) ? i->getIp() : QString(""));

 }

 

 void MainWindowImp::newProfileChanged(const QString& newText){

   if(newText.length() > 0)

    newProfileButton->setEnabled(true);

   else

     newProfileButton->setEnabled(false);

 }

 

 /**

  * Adds a new profile to the list of profiles.

  * Don't add profiles that already exists.

  * Appends to the list and QStringList

  */ 

 void MainWindowImp::addProfile(){

   QString newProfileName = newProfile->text();

   if(profiles.grep(newProfileName).count() > 0){

diff --git a/noncore/settings/networksettings/networksetup.pro b/noncore/settings/networksettings/networksetup.pro
index f09db93..441bbaa 100644
--- a/noncore/settings/networksettings/networksetup.pro
+++ b/noncore/settings/networksettings/networksetup.pro
@@ -1,11 +1,11 @@
-        DESTDIR         = $(OPIEDIR)/bin
+        #DESTDIR        = $(OPIEDIR)/bin
         TEMPLATE= app
         #CONFIG         = qt warn_on debug
         CONFIG  = qt warn_on release
         HEADERS         = mainwindowimp.h addconnectionimp.h interface.h interfaceinformationimp.h interfacesetupimp.h interfaces.h defaultmodule.h  kprocctrl.h module.h  kprocess.h
         SOURCES         = main.cpp mainwindowimp.cpp addconnectionimp.cpp interface.cpp interfaceinformationimp.cpp  interfacesetupimp.cpp kprocctrl.cpp kprocess.cpp interfaces.cpp
-        INCLUDEPATH+= $(OPIEDIR)/include
-        DEPENDPATH+= $(OPIEDIR)/include
+        #INCLUDEPATH+= $(OPIEDIR)/include
+        #DEPENDPATH+= $(OPIEDIR)/include
 LIBS            += -lqpe
         INTERFACES= mainwindow.ui addconnection.ui interfaceinformation.ui interfaceadvanced.ui interfacesetup.ui
         TARGET  = networksetup