2 files changed, 12 insertions, 6 deletions

diff --git a/noncore/net/networksetup/wlan/wlanimp.cpp b/noncore/net/networksetup/wlan/wlanimp.cpp
index 120d4e5..84e0bae 100644
--- a/noncore/net/networksetup/wlan/wlanimp.cpp
+++ b/noncore/net/networksetup/wlan/wlanimp.cpp
@@ -21,99 +21,102 @@
 /**
  * Constructor, read in the wireless.opts file for parsing later.
  */ 
 WLANImp::WLANImp( QWidget* parent, const char* name, Interface *i, bool modal, WFlags fl):WLAN(parent, name, modal, fl), currentProfile("*") {
   interfaceSetup = new InterfaceSetupImp(tabWidget, "InterfaceSetupImp", i);
   tabWidget->insertTab(interfaceSetup, "TCP/IP");
 
   // Read in the config file.
   QString wlanFile = WIRELESS_OPTS;
   QFile file(wlanFile);
   if (file.open(IO_ReadOnly)){
     QTextStream stream( &file );
     QString line = "";
     while ( !stream.eof() ) {
       line += stream.readLine();
       line += "\n";
     }
     file.close();
     settingsFileText = QStringList::split("\n", line, true);
     parseSettingFile();
   }
   else
     qDebug(QString("WLANImp: Can't open file: %1 for reading.").arg(wlanFile).latin1());
   connect(networkType, SIGNAL(activated(int)), this, SLOT(typeChanged(int)));
-
 }
 
 void WLANImp::typeChanged(int mod){
   networkChannel->setEnabled(mod);
   channelLabel->setEnabled(mod);
 }
 
 /**
  * Change the profile for both wireless settings and network settings.
  */ 
 void WLANImp::setProfile(const QString &profile){
   interfaceSetup->setProfile(profile);
   parseSettingFile();
 }
 
 /**
  * Parses the settings file that was read in and gets any setting from it.
  */ 
 void WLANImp::parseSettingFile(){
   bool foundCase = false;
   bool found = false;
   for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
     QString line = (*it).simplifyWhiteSpace();
     if(line.contains("case"))
       foundCase = true;
     // See if we found our scheme to write or the sceme couldn't be found
     if((foundCase && line.contains("esac")) || 
    (foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#'))
       found = true;
 
     if(line.contains(";;"))
       found = false;
     if(found){
       // write out scheme
       if(line.contains("ESSID=")){
         QString id = line.mid(line.find("ESSID=")+6, line.length());
         if(id == "any"){
           essAny->setChecked(false);
         }else{ 
           essAny->setChecked(true);
           essSpecificLineEdit->setText(id);
         }
       }
       if(line.contains("MODE=")){
         QString mode = line.mid(line.find("MODE=")+5, line.length());
         if(mode == "Managed"){
           networkType->setCurrentItem(0);
+          channelLabel->setEnabled(false);
+          networkChannel->setEnabled(false);
         }
         else{
-          networkType->setCurrentItem(0);
+          networkType->setCurrentItem(1);
+          networkChannel->setEnabled(true);
+          channelLabel->setEnabled(true);
         }
       }
       if(line.contains("KEY0="))
         keyLineEdit0->setText(line.mid(5, line.length()));
       if(line.contains("KEY1="))
         keyLineEdit1->setText(line.mid(5, line.length()));
       if(line.contains("KEY2="))
         keyLineEdit2->setText(line.mid(5, line.length()));
       if(line.contains("KEY3="))
         keyLineEdit3->setText(line.mid(5, line.length()));
       
       if(line.contains("KEY=")){
         wepEnabled->setChecked(true);
         QString key;
         if(line.right(5) == (" open")){
           key = line.mid(4, line.length()-5);
           authOpen->setChecked(true);
           authShared->setChecked(false);
         }
         else{
           authOpen->setChecked(false);
           authShared->setChecked(true);
           key = line.mid(4, line.length());
         }
@@ -202,42 +205,42 @@ void WLANImp::changeAndSaveSettingFile(){
 /**
  * Check to see if the current config is valid
  * Save wireless.opts, save interfaces
  */
 void WLANImp::accept(){
   if(wepEnabled->isChecked()){
     if(keyLineEdit0->text().isEmpty() && keyLineEdit1->text().isEmpty() && keyLineEdit2->text().isEmpty() && keyLineEdit3->text().isEmpty() )
         {
             QMessageBox::information(this, "Error", "Please enter a key for WEP.", QMessageBox::Ok);
             return;
         }
           }
   
   if(essSpecificLineEdit->text().isEmpty()){
     QMessageBox::information(this, "Error", "Please enter a ESS-ID.", QMessageBox::Ok);
     return;
   }
   
   // Ok settings are good here, save
   changeAndSaveSettingFile();
   
   // Try to save the interfaces settings.
   if(!interfaceSetup->saveChanges())
     return;
- 
+
   // Restart the device now that the settings have changed
   QString initpath;
   if( QDir("/etc/rc.d/init.d").exists() )
     initpath = "/etc/rc.d/init.d";
   else if( QDir("/etc/init.d").exists() )
     initpath = "/etc/init.d";
   if( initpath )
     system(QString("%1/pcmcia stop").arg(initpath));
   if( initpath )
     system(QString("%1/pcmcia start").arg(initpath));
 
   // Close out the dialog
   QDialog::accept();
 }
 
 // wlanimp.cpp
 
diff --git a/noncore/settings/networksettings/wlan/wlanimp.cpp b/noncore/settings/networksettings/wlan/wlanimp.cpp
index 120d4e5..84e0bae 100644
--- a/noncore/settings/networksettings/wlan/wlanimp.cpp
+++ b/noncore/settings/networksettings/wlan/wlanimp.cpp
@@ -21,99 +21,102 @@
 /**
  * Constructor, read in the wireless.opts file for parsing later.
  */ 
 WLANImp::WLANImp( QWidget* parent, const char* name, Interface *i, bool modal, WFlags fl):WLAN(parent, name, modal, fl), currentProfile("*") {
   interfaceSetup = new InterfaceSetupImp(tabWidget, "InterfaceSetupImp", i);
   tabWidget->insertTab(interfaceSetup, "TCP/IP");
 
   // Read in the config file.
   QString wlanFile = WIRELESS_OPTS;
   QFile file(wlanFile);
   if (file.open(IO_ReadOnly)){
     QTextStream stream( &file );
     QString line = "";
     while ( !stream.eof() ) {
       line += stream.readLine();
       line += "\n";
     }
     file.close();
     settingsFileText = QStringList::split("\n", line, true);
     parseSettingFile();
   }
   else
     qDebug(QString("WLANImp: Can't open file: %1 for reading.").arg(wlanFile).latin1());
   connect(networkType, SIGNAL(activated(int)), this, SLOT(typeChanged(int)));
-
 }
 
 void WLANImp::typeChanged(int mod){
   networkChannel->setEnabled(mod);
   channelLabel->setEnabled(mod);
 }
 
 /**
  * Change the profile for both wireless settings and network settings.
  */ 
 void WLANImp::setProfile(const QString &profile){
   interfaceSetup->setProfile(profile);
   parseSettingFile();
 }
 
 /**
  * Parses the settings file that was read in and gets any setting from it.
  */ 
 void WLANImp::parseSettingFile(){
   bool foundCase = false;
   bool found = false;
   for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
     QString line = (*it).simplifyWhiteSpace();
     if(line.contains("case"))
       foundCase = true;
     // See if we found our scheme to write or the sceme couldn't be found
     if((foundCase && line.contains("esac")) || 
    (foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#'))
       found = true;
 
     if(line.contains(";;"))
       found = false;
     if(found){
       // write out scheme
       if(line.contains("ESSID=")){
         QString id = line.mid(line.find("ESSID=")+6, line.length());
         if(id == "any"){
           essAny->setChecked(false);
         }else{ 
           essAny->setChecked(true);
           essSpecificLineEdit->setText(id);
         }
       }
       if(line.contains("MODE=")){
         QString mode = line.mid(line.find("MODE=")+5, line.length());
         if(mode == "Managed"){
           networkType->setCurrentItem(0);
+          channelLabel->setEnabled(false);
+          networkChannel->setEnabled(false);
         }
         else{
-          networkType->setCurrentItem(0);
+          networkType->setCurrentItem(1);
+          networkChannel->setEnabled(true);
+          channelLabel->setEnabled(true);
         }
       }
       if(line.contains("KEY0="))
         keyLineEdit0->setText(line.mid(5, line.length()));
       if(line.contains("KEY1="))
         keyLineEdit1->setText(line.mid(5, line.length()));
       if(line.contains("KEY2="))
         keyLineEdit2->setText(line.mid(5, line.length()));
       if(line.contains("KEY3="))
         keyLineEdit3->setText(line.mid(5, line.length()));
       
       if(line.contains("KEY=")){
         wepEnabled->setChecked(true);
         QString key;
         if(line.right(5) == (" open")){
           key = line.mid(4, line.length()-5);
           authOpen->setChecked(true);
           authShared->setChecked(false);
         }
         else{
           authOpen->setChecked(false);
           authShared->setChecked(true);
           key = line.mid(4, line.length());
         }
@@ -202,42 +205,42 @@ void WLANImp::changeAndSaveSettingFile(){
 /**
  * Check to see if the current config is valid
  * Save wireless.opts, save interfaces
  */
 void WLANImp::accept(){
   if(wepEnabled->isChecked()){
     if(keyLineEdit0->text().isEmpty() && keyLineEdit1->text().isEmpty() && keyLineEdit2->text().isEmpty() && keyLineEdit3->text().isEmpty() )
         {
             QMessageBox::information(this, "Error", "Please enter a key for WEP.", QMessageBox::Ok);
             return;
         }
           }
   
   if(essSpecificLineEdit->text().isEmpty()){
     QMessageBox::information(this, "Error", "Please enter a ESS-ID.", QMessageBox::Ok);
     return;
   }
   
   // Ok settings are good here, save
   changeAndSaveSettingFile();
   
   // Try to save the interfaces settings.
   if(!interfaceSetup->saveChanges())
     return;
- 
+
   // Restart the device now that the settings have changed
   QString initpath;
   if( QDir("/etc/rc.d/init.d").exists() )
     initpath = "/etc/rc.d/init.d";
   else if( QDir("/etc/init.d").exists() )
     initpath = "/etc/init.d";
   if( initpath )
     system(QString("%1/pcmcia stop").arg(initpath));
   if( initpath )
     system(QString("%1/pcmcia start").arg(initpath));
 
   // Close out the dialog
   QDialog::accept();
 }
 
 // wlanimp.cpp