24 files changed, 139 insertions, 137 deletions
diff --git a/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp b/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp index ef6878a..3df7f5c 100644 --- a/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp +++ b/noncore/settings/networksettings2/bluetooth/bluetoothRFCOMMrun.cpp @@ -1,164 +1,164 @@ #include <qapplication.h> #include <resources.h> #include <OTDevice.h> #include <OTGateway.h> #include "bluetoothRFCOMMrun.h" using Opietooth2::OTGateway; using Opietooth2::OTDevice; using Opietooth2::OTDeviceAddress; BluetoothRFCOMMRun::~BluetoothRFCOMMRun( void ) { if( OT ) { OTGateway::releaseOTGateway(); } } State_t BluetoothRFCOMMRun::detectState( void ) { if( ! OT ) { OT = OTGateway::getOTGateway(); } if( deviceNrOfConnection() >= 0 ) { return Available; } - owarn << "Bluetooth " + odebug << "Bluetooth " << OT->isEnabled() << oendl; return ( OT->isEnabled() ) ? Off : Unavailable; } QString BluetoothRFCOMMRun::setMyState( NodeCollection *, Action_t A, bool ) { if( OT ) { OTGateway::getOTGateway(); } if( A == Activate ) { // from OFF to Available RFCOMMChannel * Ch = getChannel( ); System & Sys = NSResources->system(); if( Ch ) { // connect to this peer DeviceNr = OT->getFreeRFCommDevice(); QStringList S; S << "rfcomm" << "bind" << QString().setNum( DeviceNr ) << Ch->BDAddress << QString().setNum( Ch->Channel ); if( Sys.runAsRoot( S ) ) { return QString( "Error starting %1").arg(S.join(" ")); } // here rfcomm should be running -> we will detect state later return QString(); } else { Log(( "No channel selected -> cancel\n" )); return QString( "No channel selected. Operation cancelled" ); } } if( A == Deactivate ) { if( DeviceNr >= 0 ) { if( OT->releaseRFCommDevice( DeviceNr ) ) { return QString( "Cannot release RFCOMM connection" ); } DeviceNr = -1; } } return QString(); } #include <qlistbox.h> #include <qframe.h> #include <qlabel.h> #include <qlayout.h> #include <qdialog.h> RFCOMMChannel * BluetoothRFCOMMRun::getChannel( void ) { if( Data->Devices.count() == 1 ) { // only one device -> return channel return Data->Devices[0]; } RFCOMMChannel * Ch = 0; QDialog * Dlg = new QDialog( qApp->mainWidget(), 0, TRUE ); QVBoxLayout * V = new QVBoxLayout( Dlg ); QLabel * L = new QLabel( qApp->translate( "BluetoothRFCOMMRun", "Select device to connect to"), Dlg ); QListBox * LB = new QListBox( Dlg ); for( unsigned int i = 0; i < Data->Devices.count(); i ++ ) { LB->insertItem( QString( "%1 (%2 Chnl %3)" ). arg( Data->Devices[i]->Name ). arg( Data->Devices[i]->BDAddress ). arg( Data->Devices[i]->Channel ) ); } V->addWidget( L ); V->addWidget( LB ); Dlg->resize( 100, 100 ); Dlg->move( 20, (qApp->desktop()->height()-100)/2 ); if( Dlg->exec() == QDialog::Accepted ) { unsigned int i = 0; for( i = 0; i < Data->Devices.count(); i ++ ) { if( LB->isSelected(i) ) { - owarn << "Selected " << Data->Devices[i]->Name << oendl; + odebug << "Selected " << Data->Devices[i]->Name << oendl; Ch = Data->Devices[i]; break; } } } delete Dlg; return Ch; } QString BluetoothRFCOMMRun::deviceFile( void ) { if( deviceNrOfConnection() >= 0 ) { OTDevice * OTD = OT->getOTDevice(); // there is a connection return OTD->getRFCommDevicePattern().arg(DeviceNr); } return QString(); } int BluetoothRFCOMMRun::deviceNrOfConnection( void ) { if( ! OT ) { OT = OTGateway::getOTGateway(); } DeviceNr = -1; for( unsigned int i = 0; i < Data->Devices.count(); i ++ ) { - owarn << "Check for rfcomm on " + odebug << "Check for rfcomm on " << Data->Devices[i]->BDAddress << " " << Data->Devices[i]->Channel << oendl; if( ( DeviceNr = OT->connectedToRFCommChannel( OTDeviceAddress( Data->Devices[i]->BDAddress ), Data->Devices[i]->Channel ) ) >= 0 ) { - owarn << "Up " + odebug << "Up " << oendl; break; } } return DeviceNr; } diff --git a/noncore/settings/networksettings2/bluetooth/config.in b/noncore/settings/networksettings2/bluetooth/config.in index 398cff1..1a76f96 100644 --- a/noncore/settings/networksettings2/bluetooth/config.in +++ b/noncore/settings/networksettings2/bluetooth/config.in @@ -1,4 +1,4 @@ config NS2BT boolean "opie-networksettings2plugin-bluetooth (set up BLUETOOTH)" default "n" if NS2 - depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && NS2CORE && NS2OPIETOOTH + depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && NS2CORE && NS2OPIETOOTH && LIBBLUEZ_DEP diff --git a/noncore/settings/networksettings2/config.in b/noncore/settings/networksettings2/config.in index d2b5f26..0236bab 100644 --- a/noncore/settings/networksettings2/config.in +++ b/noncore/settings/networksettings2/config.in @@ -1,21 +1,21 @@ source noncore/settings/networksettings2/networksettings2/config.in source noncore/settings/networksettings2/opietooth2/config.in source noncore/settings/networksettings2/opietooth2_applet/config.in config NS2 - boolean + boolean "opie-networksettings2 application" default "y" depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && NS2CORE && NS2OPIETOOTH source noncore/settings/networksettings2/profile/config.in source noncore/settings/networksettings2/network/config.in source noncore/settings/networksettings2/lancard/config.in source noncore/settings/networksettings2/ppp/config.in source noncore/settings/networksettings2/wlan/config.in source noncore/settings/networksettings2/usb/config.in source noncore/settings/networksettings2/irda/config.in source noncore/settings/networksettings2/vpn/config.in source noncore/settings/networksettings2/bluetooth/config.in source noncore/settings/networksettings2/cable/config.in source noncore/settings/networksettings2/modem/config.in source noncore/settings/networksettings2/gprs/config.in diff --git a/noncore/settings/networksettings2/editconnection.cpp b/noncore/settings/networksettings2/editconnection.cpp index 0c3ead6..717d9e9 100644 --- a/noncore/settings/networksettings2/editconnection.cpp +++ b/noncore/settings/networksettings2/editconnection.cpp @@ -1,414 +1,413 @@ #include <opie2/odebug.h> #include <qlistview.h> #include <qwidgetstack.h> #include <qframe.h> #include <qcombobox.h> #include <qtabwidget.h> #include <qmessagebox.h> #include <qpushbutton.h> #include <qlineedit.h> #include <qheader.h> #include <qpainter.h> #include <qcheckbox.h> #include <qlabel.h> #include "editconnection.h" #include "resources.h" #include "netnode.h" // // // THESE TO GIVE BETTER FEEDBACK ABOUT DISABLED ITEMS // // class MyQCheckListItem : public QCheckListItem { public: MyQCheckListItem( QListView *parent, const QString & S, Type T ) : QCheckListItem( parent, S, T ) { } MyQCheckListItem( QCheckListItem *parent, const QString & S, Type T ) : QCheckListItem( parent, S, T ) { } MyQCheckListItem( QListViewItem *parent, const QString & S, Type T ) : QCheckListItem( parent, S, T ) { } MyQCheckListItem( QListView *parent, const QString & S ) : QCheckListItem( parent, S, QCheckListItem::Controller ) { } MyQCheckListItem( QCheckListItem *parent, const QString & S ) : QCheckListItem( parent, S, QCheckListItem::Controller ) { } MyQCheckListItem( QListViewItem *parent, const QString & S ) : QCheckListItem( parent, S, QCheckListItem::Controller ) { } virtual void paintCell( QPainter *p, const QColorGroup &cg, int column, int width, int alignment ); }; void MyQCheckListItem::paintCell( QPainter *p, const QColorGroup &cg, int column, int width, int alignment ) { QColorGroup _cg( cg ); QColor c = _cg.text(); if ( ! isSelectable() ) _cg.setColor( QColorGroup::Text, Qt::lightGray ); QCheckListItem::paintCell( p, _cg, column, width, alignment ); _cg.setColor( QColorGroup::Text, c ); } class MyQListViewItem : public QListViewItem { public: MyQListViewItem( QListView *parent, const QString & S ) : QListViewItem( parent, S ) { } MyQListViewItem( QListViewItem *parent, const QString & S ) : QListViewItem( parent, S ) { } virtual void paintCell( QPainter *p, const QColorGroup &cg, int column, int width, int alignment ); }; void MyQListViewItem::paintCell( QPainter *p, const QColorGroup &cg, int column, int width, int alignment ) { QColorGroup _cg( cg ); QColor c = _cg.text(); if ( ! isSelectable() ) _cg.setColor( QColorGroup::Text, Qt::lightGray ); QListViewItem::paintCell( p, _cg, column, width, alignment ); _cg.setColor( QColorGroup::Text, c ); } // // // REAL GUI // // bool EditConnection::AutoCollapse = 1; EditConnection::EditConnection( QWidget* parent ) : EditConnectionGUI( parent, 0, TRUE ), TmpCollection() { Tab_TB->setTabEnabled( Setup_FRM, FALSE ); Setup_FRM->setEnabled( FALSE ); TmpIsValid = 0; SelectedNodes = 0; AutoCollapse_CB->setChecked( AutoCollapse ); Mapping = new QPtrDict<ANetNode>; Mapping->setAutoDelete( FALSE ); Nodes_LV->header()->hide(); // popluate tree with all NetNodes buildFullTree(); } NodeCollection * EditConnection::getTmpCollection( void ) { if( TmpIsValid ) // content is stil OK return &(TmpCollection); // reset collection -> delete all NEW NetNodes for( QListIterator<ANetNodeInstance> it(TmpCollection); it.current(); ++it ) { if( it.current()->isNew() ) { delete it.current(); } } TmpCollection.clear(); // update content QListViewItem * it = Nodes_LV->firstChild(); ANetNode * NN; // start iter (if there is a collection) /* a node collection is sorted from the toplevel node to the deepest node */ ANetNodeInstance * NNI = (SelectedNodes) ? SelectedNodes->first() : 0 ; TmpCollection.setModified( 0 ); // the listview always starts with the toplevel // hierarchy. This is always a controller item while ( it ) { NN = (*Mapping)[it]; if( NN == 0 ) { // this item is a controller -> // has radio items as children -> // find selected one it = it->firstChild(); while( it ) { if( ((QCheckListItem *)it)->isOn() ) { // this radio is selected -> go deeper break; } it = it->nextSibling(); } if( ! it ) { - owarn << "Radio not selected" << oendl; TmpIsValid = 0; return 0; } // it now contains selected radio NN = (*Mapping)[it]; } // NN here contains the netnode of the // current item -> this node needs to // be stored in the collection if( NNI == 0 || it->text(0) != NNI->nodeClass()->name() ) { // new item not in previous collection ANetNodeInstance * NNI = NN->createInstance(); NNI->initialize(); // this node type not in collection TmpCollection.append( NNI ); // master collection changed because new item in it TmpCollection.setModified( 1 ); // no more valid items in old list NNI = 0; } else { // already in list -> copy pointer TmpCollection.append( NNI ); NNI = SelectedNodes->next(); } // go deeper to next level // this level is can be a new controller // or an item it = it->firstChild(); } TmpIsValid = 1; return &(TmpCollection); } // pass a connection NodeCollection to be edited void EditConnection::setConnection( NodeCollection * NC ) { ANetNodeInstance * NNI; ANetNode * NN; SelectedNodes = NC; Name_LE->setText( NC->name() ); NNI = NC->first(); // show configure tabl Tab_TB->setCurrentPage( 1 ); // valid colledction Tab_TB->setTabEnabled( Setup_FRM, FALSE ); Setup_FRM->setEnabled( FALSE ); // select items in collection QListViewItem * it = Nodes_LV->firstChild(); bool Found; TmpIsValid = 0; while ( it ) { NN = (*Mapping)[it]; if( NN == 0 ) { // this item is a controller -> // has radio items as children -> // find selected one it = it->firstChild(); Found = 0; while( it ) { if( NNI && it->text(0) == NNI->nodeClass()->name() ) { // this radio is part of the collection ((QCheckListItem *)it)->setOn( 1 ); updateGUI( it, NNI->nodeClass() ); // check its children Found = 1; it = it->firstChild(); NNI = SelectedNodes->next(); // do not bother to check other items break; } it = it->nextSibling(); } if( ! Found ) { // this means that this level is NOT present in collection // probably INCOMPATIBEL collection OR Missing plugin QMessageBox::warning( 0, tr( "Error presentig Connection" ), tr( "<p>Old connection or missing plugin \"<i>%1</i>\"</p>" ). arg(NNI->nodeClass()->name()) ); return; } // it now contains selected radio NN = (*Mapping)[it]; } else { // automatic selection if( NNI == 0 || it->text(0) != NNI->nodeClass()->name() ) { // should exist and be the same if( NNI ) { QMessageBox::warning( 0, tr( "Error presentig Connection" ), tr( "<p>Old connection or missing plugin \"<i>%1</i>\"</p>" ). arg(NNI->nodeClass()->name()) ); } else { QMessageBox::warning( 0, tr( "Error presentig Connection" ), tr( "<p>Missing connection\"<i>%1</i>\"</p>" ). arg(it->text(0)) ); } return; } it = it->firstChild(); } } } // get result of editing (either new OR updated collection NodeCollection * EditConnection::connection( void ) { if( SelectedNodes == 0 ) { // new collection SelectedNodes = new NodeCollection; } // clean out old entries SelectedNodes->clear(); // transfer for( QListIterator<ANetNodeInstance> it(TmpCollection); it.current(); ++it ) { SelectedNodes->append( it.current() ); } if( TmpCollection.isModified() ) SelectedNodes->setModified( 1 ); if( SelectedNodes->name() != Name_LE->text() ) { SelectedNodes->setName( Name_LE->text() ); SelectedNodes->setModified( 1 ); } return SelectedNodes; } // Build device tree -> start void EditConnection::buildFullTree( void ) { ANetNode * NN; // toplevel item MyQCheckListItem * TheTop = new MyQCheckListItem( Nodes_LV, NSResources->netNode2Name("fullsetup"), QCheckListItem::Controller ); TheTop->setOpen( TRUE ); Description_LBL->setText( NSResources->netNode2Description( "fullsetup" ) ); Nodes_LV->setSelected( TheTop, TRUE ); // find all Nodes that are toplevel nodes -> ie provide // TCP/IP Connection for( QDictIterator<ANetNode> Iter(NSResources->netNodes()); Iter.current(); ++Iter ) { NN = Iter.current(); if( ! NN->isToplevel() ) { continue; } MyQCheckListItem * it = new MyQCheckListItem( TheTop, NN->name(), QCheckListItem::RadioButton ); it->setPixmap( 0, NSResources->getPixmap( NN->pixmapName() ) ); // remember that this node maps to this listitem Mapping->insert( it, NN ); buildSubTree( it, NN ); } } // Build device tree -> help function void EditConnection::buildSubTree( QListViewItem * it, ANetNode *NN ) { ANetNode::NetNodeList & NNL = NN->alternatives(); if( NNL.size() > 1 ) { // this node has alternatives -> needs radio buttons it = new MyQCheckListItem( it, NSResources->netNode2Name(NN->needs()[0]), QCheckListItem::Controller ); it->setSelectable( FALSE ); } for ( unsigned int i=0; i < NNL.size(); i++ ) { QListViewItem * CI; if( NNL.size() > 1 ) { // generate radio buttons CI = new MyQCheckListItem( (QCheckListItem *)it, NNL[i]->name(), QCheckListItem::RadioButton ); // remember that this node maps to this listitem CI->setPixmap( 0, NSResources->getPixmap( NNL[i]->pixmapName() ) ); Mapping->insert( CI, NNL[i] ); CI->setSelectable( FALSE ); } else { // Single item CI = new MyQListViewItem( it, NNL[i]->name() ); // remember that this node maps to this listitem Mapping->insert( CI, NNL[i] ); CI->setSelectable( FALSE ); CI->setPixmap( 0, NSResources->getPixmap( NNL[i]->pixmapName() ) ); } buildSubTree( CI, NNL[i] ); } } // Clicked ok OK button void EditConnection::accept( void ) { if( ! haveCompleteConfig( 0 ) || Name_LE->text().isEmpty() ) { QMessageBox::warning( 0, tr( "Closing Connection Setup" ), tr( "Definition not complete or no name" ) ); return; } // check if all devices have acceptable input getTmpCollection(); { ANetNodeInstance * NNI; QString S; for( QListIterator<ANetNodeInstance> it(TmpCollection); it.current(); ++it ) { NNI = it.current(); // widget must show its own problems S = NNI->acceptable(); if( ! S.isEmpty() ) { QMessageBox::warning( 0, tr( "Cannot save" ), S ); return; } NNI->commit(); if( NNI->isModified() ) { TmpCollection.setModified( 1 ); // commit the data } diff --git a/noncore/settings/networksettings2/gprs/GPRSrun.cpp b/noncore/settings/networksettings2/gprs/GPRSrun.cpp index e842b99..cccc71a 100644 --- a/noncore/settings/networksettings2/gprs/GPRSrun.cpp +++ b/noncore/settings/networksettings2/gprs/GPRSrun.cpp @@ -1,105 +1,105 @@ #include <sys/types.h> #include <signal.h> #include <errno.h> #include <qdir.h> #include <system.h> #include <resources.h> #include <netnode.h> #include "GPRSrun.h" State_t GPRSRun::detectState( void ) { // is pppd still running ? // is rfcomm still active NodeCollection * NC = nodeCollection(); InterfaceInfo * I = NC->assignedInterface(); QDir D("/var/run"); if( I ) { // has some pppx attached return ( I->IsUp ) ? IsUp : Available; } // check ppp itself and figure out interface - owarn << "Check for ppp " << NC->name() << oendl; + odebug << "Check for ppp " << NC->name() << oendl; if( D.exists( QString("ppp-")+removeSpaces(NC->name())+".pid") ) { // get pid and check if pppd is still running QFile F( D.path()+"/ppp-"+removeSpaces(NC->name())+".pid"); - owarn << "PPP PID " << F.name() << oendl; + odebug << "PPP PID " << F.name() << oendl; if( F.open( IO_ReadOnly ) ) { QTextStream TS(&F); QString X = TS.readLine(); PPPPid = X.toULong(); int rv; rv = ::kill( PPPPid, 0 ); if( rv == 0 || ( rv < 0 && errno == EPERM ) ) { // pppd is still up X = TS.readLine(); I = NSResources->system().findInterface(X); - owarn << "ppp running : IFace " << X << " = " << (long)I << oendl; + odebug << "ppp running : IFace " << X << " = " << (long)I << oendl; if( I ) { NC->assignInterface( I ); return (I->IsUp) ? IsUp : Available; } return Available; } else { // pppd is down PPPPid = 0; } } // else pppd is down } NC->assignInterface( 0 ); return Unknown; } QString GPRSRun::setMyState( NodeCollection * NC, Action_t A , bool ) { if( A == Up ) { // start ppp on deviceFile QStringList SL; SL << "pon" << removeSpaces( NC->name() ) << NC->device()->deviceFile(); if( ! NSResources->system().execAsUser( SL ) ) { return QString("Cannot start pppd for %1").arg(NC->name()); } } else if ( A == Down ) { if( PPPPid == 0 ) { detectState(); } if( PPPPid ) { QStringList SL; SL << "poff" << removeSpaces( NC->name() ); if( ! NSResources->system().execAsUser( SL ) ) { return QString("Cannot terminate pppd for %1").arg(NC->name()); } NC->assignInterface( 0 ); - owarn << "ppp stopped " << oendl; + odebug << "ppp stopped " << oendl; PPPPid = 0; } } return QString(); } bool GPRSRun::handlesInterface( const QString & S ) { return Pat.match( S ) >= 0; } bool GPRSRun::handlesInterface( InterfaceInfo * I ) { return handlesInterface( I->Name ); } diff --git a/noncore/settings/networksettings2/network/networkrun.cpp b/noncore/settings/networksettings2/network/networkrun.cpp index c17aa7f..2c93d9d 100644 --- a/noncore/settings/networksettings2/network/networkrun.cpp +++ b/noncore/settings/networksettings2/network/networkrun.cpp @@ -1,51 +1,50 @@ #include <system.h> #include <netnode.h> #include <resources.h> #include "networkrun.h" State_t NetworkRun::detectState( void ) { InterfaceInfo * II = nodeCollection()->assignedInterface(); Log(( "Interface %p : %d\n", II, (II) ? II->IsUp : 0 )); if( II && II->IsUp ) { // device has assigned interface return IsUp; } // had no interface or interface is no longer up -> release nodeCollection()->assignInterface( 0 ); return Unknown; } QString NetworkRun::setMyState( NodeCollection * NC, Action_t A, bool ) { // we handle UP and DOWN InterfaceInfo * II = NC->assignedInterface(); + if( ! II ) { + Log(( "no interface assigned." )); + return QString(); + } + + QStringList SL; + if( A == Up ) { // we can bring UP if lower level is available - QStringList SL; - SL << "ifup" - << QString().sprintf( "%s=%s-c%d-allowed", + SL << "ifup"; + } else if( A == Down ) { + SL << "ifdown"; + } else { + return QString(); + } + + SL << QString().sprintf( "%s=%s-c%d-allowed", II->Name.latin1(), II->Name.latin1(), nodeCollection()->number() ); - if( ! NSResources->system().runAsRoot( SL ) ) { - return QString("Cannot call %1").arg(SL.join(" ")); - } - return QString(); - } - - if( A == Down ) { - QStringList SL; - if( II ) { - SL << "ifdown" - << II->Name.latin1(); - if( ! NSResources->system().runAsRoot( SL ) ) { - return QString( "Cannot call %1" ).arg( SL.join( " " )); - } - } else { - Log(( "no interface assigned." )); - } - } + + if( ! NSResources->system().runAsRoot( SL ) ) { + return QString("Cannot call %1").arg(SL.join(" ")); + } + return QString(); } diff --git a/noncore/settings/networksettings2/networksettings.cpp b/noncore/settings/networksettings2/networksettings.cpp index 9680a96..78b6cce 100644 --- a/noncore/settings/networksettings2/networksettings.cpp +++ b/noncore/settings/networksettings2/networksettings.cpp @@ -1,514 +1,510 @@ #include <stdio.h> #include <unistd.h> #include <errno.h> #include <opie2/odebug.h> #include <opie2/oledbox.h> #include <qpe/qpeapplication.h> #include <qlistbox.h> #include <qlayout.h> #include <qgroupbox.h> #include <qtimer.h> #include <qlistbox.h> #include <qmessagebox.h> #include <qlabel.h> #include <qiconview.h> #include <qtimer.h> #include <qpe/qpeapplication.h> #include <qtoolbutton.h> #include <qevent.h> #include "networksettings.h" #include "netnode.h" #include "editconnection.h" NetworkSettings::NetworkSettings( QWidget *parent, const char *name, WFlags fl ) : NetworkSettingsGUI(parent,name,fl), NSD() { UpdateTimer = new QTimer( this ); // set pixmaps Add_TB->setPixmap( NSResources->getPixmap( "add" ) ); Delete_TB->setPixmap( NSResources->getPixmap( "remove" ) ); CheckState_TB->setPixmap( NSResources->getPixmap( "check" ) ); GenConfig_TB->setPixmap( NSResources->getPixmap( "configure" ) ); Disable_TB->setPixmap( NSResources->getPixmap( "disabled" ) ); Up_TB->setPixmap( NSResources->getPixmap( "more" ) ); Down_TB->setPixmap( NSResources->getPixmap( "less" ) ); QVBoxLayout* V = new QVBoxLayout( LED_Frm ); QHBoxLayout * H = new QHBoxLayout( 0 ); V->addStretch(1); V->addLayout( H ); Leds[0] = new Opie::Ui::OLedBox( red, LED_Frm ); H->addWidget( Leds[0], 0, Qt::AlignVCenter ); Leds[1] = new Opie::Ui::OLedBox( red, LED_Frm ); H->addWidget( Leds[1], 0, Qt::AlignVCenter ); Leds[2] = new Opie::Ui::OLedBox( red, LED_Frm ); H->addWidget( Leds[2], 0, Qt::AlignVCenter ); V->addStretch(1); SLOT_ToProfile(); // populate main Listbox Profiles_LB->clear(); QPEApplication::setStylusOperation( Profiles_LB->viewport(), QPEApplication::RightOnHold ); connect( Profiles_LB, SIGNAL(rightButtonPressed(QListBoxItem*,const QPoint&)), this, SLOT(SLOT_EditNode(QListBoxItem*)) ); { Name2Connection_t & M = NSResources->connections(); NodeCollection * NC; // for all connections for( QDictIterator<NodeCollection> it(M); it.current(); ++it ) { NC = it.current(); Profiles_LB->insertItem( NC->devicePixmap(), NC->name() ); } } if( Profiles_LB->count() ) { Profiles_LB->setSelected( 0, TRUE ); } // if no profiles -> auto popup editing if( NSResources->connections().count() == 0 ) { QTimer::singleShot( 100, this, SLOT(SLOT_AddNode() ) ); } connect( &(NSResources->system()), SIGNAL( stdoutLine(const QString &) ), this, SLOT( SLOT_CmdMessage(const QString &) ) ); connect( &(NSResources->system()), SIGNAL( stderrLine(const QString &) ), this, SLOT( SLOT_CmdMessage(const QString &) ) ); connect( &(NSResources->system()), SIGNAL( processEvent(const QString &) ), this, SLOT( SLOT_CmdMessage(const QString &) ) ); UpdateTimer->start( 5000 ); connect( UpdateTimer, SIGNAL( timeout() ), this, SLOT( SLOT_RefreshStates() ) ); /* Add QCopChannel */ connect( qApp, SIGNAL(appMessage(const QCString&,const QByteArray&)), this, SLOT(SLOT_QCopMessage(const QCString&,const QByteArray&)) ); } NetworkSettings::~NetworkSettings() { QString S; - owarn << "Dispose NS" << oendl; if( NSD.isModified() ) { - owarn << "Modified" << oendl; S = NSD.saveSettings(); if( ! S.isEmpty() ) { S.insert( 0, "<p>" ); S.append( "</p>" ); // problem saving QMessageBox::warning( 0, tr( "Saving setup" ), S ); } SLOT_GenerateConfig(); NSD.setModified( 0 ); } } void NetworkSettings::SLOT_CmdMessage( const QString & S ) { Messages_LB->insertItem( S ); Messages_LB->setCurrentItem( Messages_LB->count()-1 ); Messages_LB->ensureCurrentVisible(); } void NetworkSettings::SLOT_RefreshStates( void ) { QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); // remember if( LBI ) { NodeCollection * NC; NSResources->system().probeInterfaces(); // update current selection only NC = NSResources->findConnection( LBI->text() ); if( NC ) { State_t OldS = NC->state(); State_t NewS = NC->state(1); if( OldS != NewS ) { updateProfileState( LBI ); } } } /* -> LATER !! bool is; NodeCollection * NC; for( unsigned int i = 0; i < Profiles_LB->count() ; i ++ ) { NC = NSResources->findConnection( Profiles_LB->text(i) ); if( NC ) { State_t OldS = NC->state(); State_t NewS = NC->state(1); if( OldS != NewS ) { is = Profiles_LB->isSelected(i); Profiles_LB->changeItem( NC->statePixmap(NewS), NC->name(), i ); if( is ) { Profiles_LB->setSelected( i, TRUE ); } } } } if( ci >= 0 ) Profiles_LB->setCurrentItem( ci ); */ } void NetworkSettings::SLOT_AddNode( void ) { SLOT_EditNode( 0 ); } void NetworkSettings::SLOT_DeleteNode( void ) { QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); if ( ! LBI ) return; if( QMessageBox::warning( 0, tr( "Removing profile" ), tr( "Remove selected profile ?" ), 1, 0 ) == 1 ) { NSResources->removeConnection( LBI->text() ); delete LBI; NSD.setModified( 1 ); } } void NetworkSettings::SLOT_EditNode( QListBoxItem * LBI ) { QString OldName = ""; EditConnection EC( this ); if( LBI ) { NodeCollection * NC = NSResources->findConnection( LBI->text() ); if( ! NC ) { return; } OldName = NC->name(); EC.setConnection( NC ); } EC.showMaximized(); // disable refresh timer UpdateTimer->stop(); // we need to retry while( 1 ) { if( EC.exec() == QDialog::Accepted ) { // toplevel item -> store NodeCollection * NC = EC.connection(); if( NC->isModified() ) { if( LBI ) { if( NC->name() != OldName ) { // find if new name is free NodeCollection * LCN = NSResources->findConnection( NC->name() ); if( LCN ) { QMessageBox::warning( 0, tr( "In System Config" ), tr( "Name %1 already exists" ).arg(NC->name()) ); continue; // restart exec } // else new name // new name -> remove item NSResources->removeConnection( OldName ); NSResources->addConnection( NC, 0 ); } // else not changed // must add it here since change will trigger event Profiles_LB->changeItem( NC->devicePixmap(), NC->name(), Profiles_LB->index( LBI ) ); } else { // new item int ci = Profiles_LB->count(); NSResources->addConnection( NC, 0 ); NC->setNumber( NSResources->assignConnectionNumber() ); Profiles_LB->insertItem( NC->devicePixmap(), NC->name() ); Profiles_LB->setSelected( ci, TRUE ); } updateProfileState( LBI ); } } else { // cancelled : reset connection if( LBI ) { NodeCollection * NC = NSResources->findConnection( LBI->text() ); NC->reassign(); } } break; } // reenable UpdateTimer->start( 5000 ); } void NetworkSettings::SLOT_ShowNode( QListBoxItem * LBI ) { if( LBI == 0 ) return; NodeCollection * NC = NSResources->findConnection( LBI->text() ); if( NC->description().isEmpty() ) { Description_LBL->setText( tr( "<<No description>>" ) ); } else { Description_LBL->setText( NC->description() ); } Profile_GB->setTitle( LBI->text() + " : " + NC->stateName() ); bool FrmActive = 1; bool IsEnabled = 1; int leds = 0; - owarn << "State " << NC->state() << oendl; switch( NC->state() ) { case Disabled : // no further work IsEnabled = 0; FrmActive = 0; - owarn << "LEds " << leds << oendl; break; case Unknown : case Unchecked : case Unavailable : FrmActive = 0; break; case Off : leds = 1; break; case Available : leds = 2; break; case IsUp : leds = 3; break; } Disable_TB->setOn( ! IsEnabled ); LED_Frm->setEnabled( FrmActive ); for( int i = 0 ; i < leds; i ++ ) { Leds[i]->setColor( red ); Leds[i]->setOn( true ); } for( int i = leds ; i < 3; i ++ ) { Leds[i]->setColor( red ); Leds[i]->setOn( false ); } Up_TB->setEnabled( leds < 3 && leds != 0 ); Down_TB->setEnabled( leds > 0 ); } void NetworkSettings::SLOT_CheckState( void ) { QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); if ( ! LBI ) return; updateProfileState( LBI ); } void NetworkSettings::updateProfileState( QListBoxItem * LBI ) { if( LBI == Profiles_LB->item( Profiles_LB->currentItem() ) ) { SLOT_ShowNode( LBI ); } } void NetworkSettings::SLOT_GenerateConfig( void ) { QString S = NSD.generateSettings(); if( ! S.isEmpty() ) { S.insert( 0, "<p>" ); S.append( "</p>" ); QMessageBox::warning( 0, tr( "Generate config" ), S); } } void NetworkSettings::SLOT_Disable( bool T ) { QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); QString Msg; if ( ! LBI ) return; NodeCollection * NC = NSResources->findConnection( LBI->text() ); - owarn << "Prepare to disable" << oendl; + Log(( "Prepare to %sable\n", (T) ? "en" : "dis" )); Msg = NC->setState( (T) ? Disable : Enable ); if( ! Msg.isEmpty() ) { Msg.insert( 0, "<p>" ); Msg.append( "</p>" ); QMessageBox::warning( 0, tr( "Activating profile" ), Msg ); return; } // reload new state NC->state( true ); updateProfileState( LBI ); } void NetworkSettings::SLOT_Up( void ) { // bring more up QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); QString Msg; int led = -1; if ( ! LBI ) return; NodeCollection * NC = NSResources->findConnection( LBI->text() ); switch( NC->state() ) { case Disabled : // cannot modify this state case Unknown : // cannot modify this state case Unchecked : // cannot modify this state case Unavailable : // cannot modify this state case IsUp : // highest UP state return; case Off : // -> activate led = 1; Down_TB->setEnabled( true ); Log(( "Activate interface %s\n", NC->name().latin1() )); Msg = NC->setState( Activate ); break; case Available : // -> up led = 2; Log(( "Bring up interface %s\n", NC->name().latin1() )); Msg = NC->setState( Up ); if( Msg.isEmpty() ) { Up_TB->setEnabled( false ); } break; } if( ! Msg.isEmpty() ) { Msg.insert( 0, "<p>" ); Msg.append( "</p>" ); QMessageBox::warning( 0, tr( "Increase availability" ), Msg ); return; } updateProfileState( LBI ); // set color of led we should change if( led > 0 ) { Leds[led]->setColor( blue ); Leds[led]->setOn( true ); } } void NetworkSettings::SLOT_Down( void ) { // bring more down QListBoxItem * LBI = Profiles_LB->item( Profiles_LB->currentItem() ); int led = -1; QString Msg; if ( ! LBI ) return; NodeCollection * NC = NSResources->findConnection( LBI->text() ); switch( NC->state() ) { case Disabled : // cannot modify this state case Unknown : // cannot modify this state case Unchecked : // cannot modify this state case Unavailable : // cannot modify this state case Off : // highest DOWN state break; case Available : // -> down led = 0; Log(( "Deactivate interface %s\n", NC->name().latin1() )); Msg = NC->setState( Deactivate ); Down_TB->setEnabled( false ); break; case IsUp : // highest UP state led = 1; Up_TB->setEnabled( true ); Log(( "Bring down interface %s\n", NC->name().latin1() )); Msg = NC->setState( Down, 1 ); if( Msg.isEmpty() ) { // remove 'up' file to make sure unlink ( QString().sprintf( "/tmp/Profile-%d.up", NC->number() ).latin1() );; } break; } if( ! Msg.isEmpty() ) { Msg.insert( 0, "<p>" ); Msg.append( "</p>" ); QMessageBox::warning( 0, tr( "Decrease availability" ), Msg ); return; } updateProfileState( LBI ); // set color of led we should change if( led >= 0 ) { Leds[led]->setColor( blue ); } } void NetworkSettings::SLOT_ToMessages( void ) { Profiles_LB->hide(); Profile_GB->hide(); Messages_GB->show(); } void NetworkSettings::SLOT_ToProfile( void ) { Profiles_LB->show(); Profile_GB->show(); Messages_GB->hide(); } void NetworkSettings::SLOT_QCopMessage(const QCString &msg, const QByteArray &data) { QDataStream stream( data, IO_ReadOnly ); if( msg == "raise" ) { raise(); return; } /* if ( msg == "someMessage(int,int,int)" ) { int a,b,c; stream >> a >> b >> c; ... } */ } diff --git a/noncore/settings/networksettings2/networksettings2/config.in b/noncore/settings/networksettings2/networksettings2/config.in index b384e18..56e971e 100644 --- a/noncore/settings/networksettings2/networksettings2/config.in +++ b/noncore/settings/networksettings2/networksettings2/config.in @@ -1,5 +1,5 @@ config NS2CORE - boolean "opie-networksettings2 (TCP/IP network settings)" + boolean "opie-networksettings2 library" default "y" depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && LIBOPIE2UI diff --git a/noncore/settings/networksettings2/networksettings2/system.cpp b/noncore/settings/networksettings2/networksettings2/system.cpp index e642c08..f027d35 100644 --- a/noncore/settings/networksettings2/networksettings2/system.cpp +++ b/noncore/settings/networksettings2/networksettings2/system.cpp @@ -1,587 +1,587 @@ #include <sys/types.h> #include <sys/wait.h> #include <net/if.h> #include <net/if_arp.h> #include <netinet/in.h> #include <arpa/inet.h> #include <sys/ioctl.h> #include <sys/socket.h> #include <stdlib.h> #include <stdio.h> #include <fcntl.h> #include <errno.h> #include <unistd.h> #include <opie2/oprocess.h> #include <qdir.h> #include <qregexp.h> #include <qstringlist.h> #include <qfile.h> #include <qtextstream.h> #include <qapplication.h> #include "resources.h" #include "system.h" #define PROCNETDEV "/proc/net/dev" #ifndef ARPHRD_IEEE80211 #define ARPHRD_IEEE80211 801 #endif static char Dig2Hex[] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; // get HIGH nibble of byte #define HN(x) Dig2Hex[(((x)&0xf0)>>4)] // get LOW nibble of byte #define LN(x) Dig2Hex[((x)&0x0f)] System::System( void ) : QObject(), ProbedInterfaces() { ProcDevNet = 0; } System::~System( void ) { if( ProcDevNet ) delete ProcDevNet; } QDict<InterfaceInfo> & System::interfaces( void ) { if( ProbedInterfaces.count() == 0 ) { probeInterfaces(); } return ProbedInterfaces; } int System::runAsRoot( QStringList & S, MyProcess * Prc ) { char * usr = getenv("USER"); if( S.count() == 0 ) { // loophole to start shell return 8888; } if( usr == 0 || strcmp( usr, "root" ) ) { // unknown or non-root user -> use SUDO S.prepend( "sudo" ); } if( getenv( "NS2TESTMODE" ) ) { - owarn << "TESTMODE !!! execute " + odebug << "TESTMODE !!! execute " << S.join( " ") << oendl; } else { MyProcess * P; if( Prc ) { P = Prc; } else { P = new MyProcess(); emit processEvent( tr("Command : ") + S.join( " " ) ); connect( P, SIGNAL( stdoutLine( const QString & ) ), this, SIGNAL( stdoutLine( const QString & ) ) ); connect( P, SIGNAL( stderrLine( const QString & ) ), this, SIGNAL( stderrLine( const QString & ) ) ); connect( P, SIGNAL(processExited(MyProcess*) ), this, SLOT (SLOT_ProcessExited(MyProcess*) ) ); } P->process() << S; Log(("Executing %s\n", S.join( " " ).latin1() )); if( ! P->process().start( OProcess::DontCare, OProcess::AllOutput ) ) { - owarn << "Error starting " << S << oendl; + odebug << "Error starting " << S << oendl; if( ! Prc ) delete P; // error starting app return 0; } - owarn << "Started " << S << oendl; + odebug << "Started " << S << oendl; } // all is fine return 1; } int System::execAsUser( QStringList & SL ) { MyProcess * P = new MyProcess(); CurrentQPEUser CU = NSResources->currentUser(); char * usr = getenv("USER"); if( strcmp( usr, "root" ) == 0 ) { // find user running qpe if( CU.UserName.isEmpty() ) { // if we come here, the exec was not successfull Log(("User not known \n" )); return 0; } } // now we are ready to exec the requested command setuid( CU.Uid ); setgid( CU.Gid ); for( unsigned int i = 0 ; i < CU.EnvList.count() ; i ++ ) { QString X; QStringList SL; X = CU.EnvList[i]; SL = QStringList::split( "=", X ); P->process().setEnvironment( SL[0], SL[1] ); } P->process() << SL; emit processEvent( tr("Command : ") + SL.join( " " ) ); Log(("Executing as user %s : %s\n", CU.UserName.latin1(), SL.join( " " ).latin1() )); int rv = ( P->process().start( OProcess::DontCare, OProcess::NoCommunication ) ); delete P; if( rv ) { // if we come here, the exec was not successfull Log(("Could not exec : %d\n", errno )); } return ! rv; } void System::SLOT_ProcessExited( MyProcess * P ) { QString R; for( QValueListConstIterator<QCString> it = P->process().args().begin(); it != P->process().args().end(); ++it ) { R += (*it); R += " "; } R += "Returned with " + QString().setNum( P->process().exitStatus() ); emit processEvent( R ); delete P; } void System::refreshStatistics( InterfaceInfo & I ) { if( ! ProcDevNet ) { return; } // cannot seek on dev ProcDevNet->close(); ProcDevNet->open( IO_ReadOnly ); QString line; QTextStream procTs(ProcDevNet); QStringList SL; int loc = -1; int version; procTs.readLine(); line = procTs.readLine(); // get version if( line.find("compressed") ) version = 3; else if( line.find( "bytes" ) ) version = 2; else version = 1; while((line = procTs.readLine().simplifyWhiteSpace()) != QString::null) { if( (loc = line.find(":") ) == -1) { continue; } if( I.Name != line.left(loc) ) continue; // tokenize SL = QStringList::split( ' ', line, FALSE ); // update data switch( version ) { case 1 : I.RcvBytes = SL[1]; I.RcvErrors = SL[3]; I.RcvDropped = SL[4]; I.SndBytes = SL[6]; I.SndErrors = SL[8]; I.SndDropped = SL[9]; I.Collisions = SL[11]; break; case 2 : I.RcvBytes = SL[1]; I.RcvErrors = SL[3]; I.RcvDropped = SL[4]; I.SndBytes = SL[7]; I.SndErrors = SL[9]; I.SndDropped = SL[10]; I.Collisions = SL[12]; break; case 3 : I.RcvBytes = SL[1]; I.RcvErrors = SL[3]; I.RcvDropped = SL[4]; I.SndBytes = SL[9]; I.SndErrors = SL[11]; I.SndDropped = SL[12]; I.Collisions = SL[14]; break; } break; } } // // THIS UPDATES THE LIST -> INTERFACES ARE NOT DELETED BUT // FLAGGED AS ! 'IsUp' IF NO LONGER PRESENT // void System::probeInterfaces( void ) { // probe interfaces int sockfd; // get list of all interfaces struct ifreq ifrs; InterfaceInfo * IFI; // flag all as 'down' for( QDictIterator<InterfaceInfo> it( ProbedInterfaces ); it.current(); ++it ) { it.current()->IsUp = 0; } sockfd = socket(PF_INET, SOCK_DGRAM, 0); if(sockfd == -1) { - owarn << "Cannot open INET socket " + odebug << "Cannot open INET socket " << errno << " " << strerror( errno ) << oendl; return; } // read interfaces from /proc/dev/net // SIOCGIFCONF does not return ALL interfaces ???!? ProcDevNet = new QFile(PROCNETDEV); if( ! ProcDevNet->open(IO_ReadOnly) ) { - owarn << "Cannot open " + odebug << "Cannot open " << PROCNETDEV << " " << errno << " " << strerror( errno ) << oendl; delete ProcDevNet; ProcDevNet =0; ::close( sockfd ); return; } QString line; QString NicName; QTextStream procTs(ProcDevNet); int loc = -1; procTs.readLine(); // eat a line procTs.readLine(); // eat a line while((line = procTs.readLine().simplifyWhiteSpace()) != QString::null) { if((loc = line.find(":")) == -1) { continue; } NicName = line.left(loc); // set name for ioctl strcpy( ifrs.ifr_name, NicName.latin1() ); if ( ! ( IFI = ProbedInterfaces.find( NicName ) ) ) { // new nic Log(("New NIC found : %s\n", NicName.latin1())); IFI = new InterfaceInfo; IFI->Name = line.left(loc); IFI->Collection = 0; ProbedInterfaces.insert( IFI->Name, IFI ); // get dynamic info if( ioctl(sockfd, SIOCGIFFLAGS, &ifrs) >= 0 ) { IFI->IsPointToPoint = ((ifrs.ifr_flags & IFF_POINTOPOINT) == IFF_POINTOPOINT); } else { IFI->IsPointToPoint = 0; } // settings that never change IFI->DstAddress = ""; if( IFI->IsPointToPoint ) { if( ioctl(sockfd, SIOCGIFDSTADDR, &ifrs) >= 0 ) { IFI->DstAddress = inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_dstaddr)->sin_addr); } } IFI->CardType = 999999; IFI->MACAddress = ""; if( ioctl(sockfd, SIOCGIFHWADDR, &ifrs) >= 0 ) { Log(("Family for NIC %s : %d\n", IFI->Name.latin1(), ifrs.ifr_hwaddr.sa_family )); IFI->CardType = ifrs.ifr_hwaddr.sa_family; switch( ifrs.ifr_hwaddr.sa_family ) { case ARPHRD_ETHER : // regular MAC address // valid address -> convert to regular ::: format // length = 6 bytes = 12 DIGITS -> 6 : IFI->MACAddress.sprintf( "%c%c:%c%c:%c%c:%c%c:%c%c:%c%c", HN( ifrs.ifr_hwaddr.sa_data[0] ), LN( ifrs.ifr_hwaddr.sa_data[0] ), HN( ifrs.ifr_hwaddr.sa_data[1] ), LN( ifrs.ifr_hwaddr.sa_data[1] ), HN( ifrs.ifr_hwaddr.sa_data[2] ), LN( ifrs.ifr_hwaddr.sa_data[2] ), HN( ifrs.ifr_hwaddr.sa_data[3] ), LN( ifrs.ifr_hwaddr.sa_data[3] ), HN( ifrs.ifr_hwaddr.sa_data[4] ), LN( ifrs.ifr_hwaddr.sa_data[4] ), HN( ifrs.ifr_hwaddr.sa_data[5] ), LN( ifrs.ifr_hwaddr.sa_data[5] ) ); break; #ifdef ARPHRD_IEEE1394 case ARPHRD_IEEE1394 : // Firewire Eth address IFI->MACAddress.sprintf( "%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-%c%c-00-00", HN( ifrs.ifr_hwaddr.sa_data[0] ), LN( ifrs.ifr_hwaddr.sa_data[0] ), HN( ifrs.ifr_hwaddr.sa_data[1] ), LN( ifrs.ifr_hwaddr.sa_data[1] ), HN( ifrs.ifr_hwaddr.sa_data[2] ), LN( ifrs.ifr_hwaddr.sa_data[2] ), HN( ifrs.ifr_hwaddr.sa_data[3] ), LN( ifrs.ifr_hwaddr.sa_data[3] ), HN( ifrs.ifr_hwaddr.sa_data[4] ), LN( ifrs.ifr_hwaddr.sa_data[4] ), HN( ifrs.ifr_hwaddr.sa_data[5] ), LN( ifrs.ifr_hwaddr.sa_data[5] ), HN( ifrs.ifr_hwaddr.sa_data[6] ), LN( ifrs.ifr_hwaddr.sa_data[6] ), HN( ifrs.ifr_hwaddr.sa_data[7] ), LN( ifrs.ifr_hwaddr.sa_data[7] ), HN( ifrs.ifr_hwaddr.sa_data[8] ), LN( ifrs.ifr_hwaddr.sa_data[8] ), HN( ifrs.ifr_hwaddr.sa_data[9] ), LN( ifrs.ifr_hwaddr.sa_data[9] ), HN( ifrs.ifr_hwaddr.sa_data[10] ), LN( ifrs.ifr_hwaddr.sa_data[10] ), HN( ifrs.ifr_hwaddr.sa_data[11] ), LN( ifrs.ifr_hwaddr.sa_data[11] ), HN( ifrs.ifr_hwaddr.sa_data[12] ), LN( ifrs.ifr_hwaddr.sa_data[12] ), HN( ifrs.ifr_hwaddr.sa_data[13] ), LN( ifrs.ifr_hwaddr.sa_data[13] ) ); break; #endif case ARPHRD_PPP : // PPP break; case ARPHRD_IEEE80211 : // WLAN break; case ARPHRD_IRDA : // IRDA break; } } } else // else already probed before -> just update Log(("Redetected NIC %s\n", NicName.latin1())); // get dynamic info if( ioctl(sockfd, SIOCGIFFLAGS, &ifrs) >= 0 ) { IFI->IsUp = ((ifrs.ifr_flags & IFF_UP) == IFF_UP); IFI->HasMulticast = ((ifrs.ifr_flags & IFF_MULTICAST) == IFF_MULTICAST); } else { IFI->IsUp = 0; IFI->HasMulticast = 0; } if( ioctl(sockfd, SIOCGIFADDR, &ifrs) >= 0 ) { IFI->Address = inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_addr)->sin_addr); } else { IFI->Address = ""; IFI->IsUp = 0; } if( ioctl(sockfd, SIOCGIFBRDADDR, &ifrs) >= 0 ) { IFI->BCastAddress = inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_broadaddr)->sin_addr); } else { IFI->BCastAddress = ""; } if( ioctl(sockfd, SIOCGIFNETMASK, &ifrs) >= 0 ) { IFI->Netmask = inet_ntoa(((struct sockaddr_in*)&ifrs.ifr_netmask)->sin_addr); } else { IFI->Netmask = ""; } Log(("NIC %s UP ? %d\n", NicName.latin1(), IFI->IsUp )); } ::close( sockfd ); } InterfaceInfo * System::findInterface( const QString & N ) { InterfaceInfo * Run; // has PAN connection UP interface ? for( QDictIterator<InterfaceInfo> It(ProbedInterfaces); It.current(); ++It ) { Run = It.current(); if( N == Run->Name ) { // this PAN connection is up return Run; } } return 0; } #include <stdarg.h> static FILE * logf = 0; void VLog( char * Format, ... ) { va_list l; va_start(l, Format ); if( logf == (FILE *)0 ) { QString S = getenv("NS2LOG"); if( S == "stderr" ) { logf = stderr; } else if( S.isEmpty() ) { logf = fopen( "/tmp/ns2log", "a" ); } else { logf = fopen( S, "a" ); } if( ! logf ) { fprintf( stderr, "Cannot open logfile %s : %d\n", S.latin1(), errno ); logf = (FILE *)1; } else { fprintf( logf, "____ OPEN LOGFILE ____\n"); } } if( (unsigned long)logf > 1 ) { vfprintf( logf, Format, l ); } va_end( l ); fflush( logf ); } void LogClose( void ) { if( (long)logf > 1 ) { fprintf( logf, "____ CLOSE LOGFILE ____\n"); if( logf != stderr ) { fclose( logf ); } logf = 0; } } QString removeSpaces( const QString & X ) { QString Y; Y = X.simplifyWhiteSpace(); Y.replace( QRegExp(" "), "_" ); - owarn << X << " **" << Y << "**" << oendl; + odebug << X << " **" << Y << "**" << oendl; return Y; } // // // // // MyProcess::MyProcess() : QObject(), StdoutBuffer(), StderrBuffer() { P = new OProcess(); connect( P, SIGNAL( receivedStdout(Opie::Core::OProcess*, char*, int ) ), this, SLOT( SLOT_Stdout(Opie::Core::OProcess*,char*,int) ) ); connect( P, SIGNAL( receivedStderr(Opie::Core::OProcess*, char*, int ) ), this, SLOT( SLOT_Stderr(Opie::Core::OProcess*,char*,int) ) ); connect( P, SIGNAL( processExited(Opie::Core::OProcess*) ), this, SLOT( SLOT_ProcessExited(Opie::Core::OProcess*) ) ); } MyProcess::~MyProcess() { delete P; } void MyProcess::SLOT_Stdout( Opie::Core::OProcess * , char * Buf, int len ) { char * LB = (char *)alloca( len + 1 ); memcpy( LB, Buf, len ); LB[len] = '\0'; // now input is zero terminated StdoutBuffer += LB; - owarn << "Received " << len << " bytes on stdout" << oendl; + odebug << "Received " << len << " bytes on stdout" << oendl; // see if we have some lines (allow empty lines) QStringList SL = QStringList::split( "\n", StdoutBuffer, TRUE ); for( unsigned int i = 0; i < SL.count()-1; i ++ ) { Log(( "Stdout : \"%s\"\n", SL[i].latin1() ) ); emit stdoutLine( SL[i] ); } // last line is rest StdoutBuffer = SL[ SL.count()-1 ]; } void MyProcess::SLOT_Stderr( Opie::Core::OProcess * , char * Buf, int len ) { char * LB = (char *)alloca( len + 1 ); memcpy( LB, Buf, len ); LB[len] = '\0'; // now input is zero terminated StderrBuffer += LB; - owarn << "Received " << len << " bytes on stderr" << oendl; + odebug << "Received " << len << " bytes on stderr" << oendl; // see if we have some lines (allow empty lines) QStringList SL = QStringList::split( "\n", StderrBuffer, TRUE ); for( unsigned int i = 0; i < SL.count()-1; i ++ ) { Log(( "Stderr : \"%s\"\n", SL[i].latin1() ) ); emit stderrLine( SL[i] ); } // last line is rest StderrBuffer = SL[ SL.count()-1 ]; } void MyProcess::SLOT_ProcessExited( Opie::Core::OProcess * ) { emit processExited( this ); } diff --git a/noncore/settings/networksettings2/networksettings2/systemfile.cpp b/noncore/settings/networksettings2/networksettings2/systemfile.cpp index 8deef94..1b1988e 100644 --- a/noncore/settings/networksettings2/networksettings2/systemfile.cpp +++ b/noncore/settings/networksettings2/networksettings2/systemfile.cpp @@ -1,235 +1,235 @@ #include <stdio.h> #include <qpe/qpeapplication.h> #include <qfileinfo.h> #include <qmessagebox.h> #include <qfile.h> #include <qtextstream.h> #include "resources.h" #include "systemfile.h" #define TEMPLATEDIR "NS2templates/" QString TemplDir; SystemFile::SystemFile( const QString & N, const QString & P, bool KDI ){ Name = N; Path = P; InAppend = 0; F = 0; // get template info { QString S; QFileInfo FI; // find location of templates TemplDir = QPEApplication::qpeDir() + "etc/" + TEMPLATEDIR; FI.setFile( TemplDir ); if( ! FI.isDir() ) { // try current dir TemplDir = "./" TEMPLATEDIR; FI.setFile( TemplDir ); if( ! FI.isDir() ) { hasPreSection = hasPostSection = hasPreNodeSection = hasPostNodeSection = hasPreDeviceSection = hasPostDeviceSection = 0; return; } } // have found location S = TemplDir + Name + "/presection"; FI.setFile( S ); hasPreSection = ( FI.exists() && FI.isReadable() ); S = TemplDir + Name + "/postsection"; FI.setFile( S ); hasPostSection = ( FI.exists() && FI.isReadable() ); S = TemplDir + Name + "/prenodesection"; FI.setFile( S ); hasPreNodeSection = ( FI.exists() && FI.isReadable() ); S = TemplDir + Name + "/postnodesection"; FI.setFile( S ); hasPostNodeSection = ( FI.exists() && FI.isReadable() ); S = TemplDir + Name + "/predevicesection"; FI.setFile( S ); hasPreDeviceSection = ( FI.exists() && FI.isReadable() ); S = TemplDir + Name + "/postdevicesection"; FI.setFile( S ); hasPostDeviceSection = ( FI.exists() && FI.isReadable() ); } KnowsDeviceInstances = KDI; } SystemFile::SystemFile( const QString & N, bool KDI ){ Name = N; Path = ""; InAppend = 0; F =0; KnowsDeviceInstances = KDI; hasPreSection = hasPostSection = hasPreNodeSection = hasPostNodeSection = hasPreDeviceSection = hasPostDeviceSection = 0; } SystemFile::~SystemFile( void ) { close(); } bool SystemFile::open( void ) { QString Prefix = getenv( "NS2OUTPUTTO" ); if( Prefix != "stderr" /* && Name != "interfaces" */ ) { // generate files where the need to be if( F ) { F->close(); delete F; } F = new QFile( Prefix + Path + ((InAppend)?"":"bup") ); Log(( "Open systemfile %s\n", F->name().latin1() )); if( ! F->open( ((InAppend)?IO_Append : 0 ) | IO_WriteOnly ) ) { return 0; } } else { if( ! F ) { - owarn << "!!!!!!!!!!!!!!!!!! " << oendl; - owarn << "!!!! TESTMODE !!!!" << oendl; - owarn << "!!!!!!!!!!!!!!!!!! " << oendl; - owarn << "!!!!" << oendl; - owarn << "!!!! GENERATE " << Path << oendl; + odebug << "!!!!!!!!!!!!!!!!!! " << oendl; + odebug << "!!!! TESTMODE !!!!" << oendl; + odebug << "!!!!!!!!!!!!!!!!!! " << oendl; + odebug << "!!!!" << oendl; + odebug << "!!!! GENERATE " << Path << oendl; if( InAppend ) { - owarn << "!!!! In APPEND mode" << oendl; + odebug << "!!!! In APPEND mode" << oendl; } - owarn << "!!!!" << oendl; - owarn << "!!!!!!!!!!!!!!!!!!" << oendl; + odebug << "!!!!" << oendl; + odebug << "!!!!!!!!!!!!!!!!!!" << oendl; F = new QFile(); F->open( IO_WriteOnly, stderr ); } } setDevice( F ); return 1; } bool SystemFile::close( void ) { if( ! F || ! F->isOpen() ) { return 1 ; } QString Prefix = getenv( "NS2OUTPUTTO" ); if( Prefix == "stderr" ) { return 1; } QString OldP = Prefix + Path + "bup"; F->close(); delete F; F = 0; if( ! InAppend ) { - owarn << "Rename " << OldP << " to " << Path << oendl; + odebug << "Rename " << OldP << " to " << Path << oendl; return ( rename( OldP.latin1(), Path.latin1() ) >= 0 ); } return 1; } bool SystemFile::preSection( void ) { if( hasPreSection ) { QFile Fl( TemplDir + Name + "/presection" ); if( ! Fl.open( IO_ReadOnly ) ) return 0; // error // copy file to this file F->writeBlock( Fl.readAll() ); } return 1; } bool SystemFile::postSection( void ) { if( hasPostSection ) { QFile Fl( TemplDir + Name + "/postsection" ); if( ! Fl.open( IO_ReadOnly ) ) return 0; // error // copy file to this file F->writeBlock( Fl.readAll() ); } return 1; } bool SystemFile::preNodeSection( ANetNodeInstance * NNI, long ) { if( hasPreNodeSection ) { QFile Fl( TemplDir + Name + "/prenodesection" ); if( ! Fl.open( IO_ReadOnly ) ) return 0; // error QTextStream TX( &Fl ); QString Out; QString S = TX.readLine(); while( ! TX.eof() ) { Out = S. arg(NNI->nodeClass()->name()); (*this) << Out << endl; S = TX.readLine(); } } return 1; } bool SystemFile::postNodeSection( ANetNodeInstance * NNI, long ) { if( hasPostNodeSection ) { QFile Fl( TemplDir + Name + "/postnodesection" ); if( ! Fl.open( IO_ReadOnly ) ) return 0; // error QTextStream TX( &Fl ); QString Out; QString S = TX.readLine(); while( ! TX.eof() ) { Out = S. arg(NNI->name()); (*this) << Out << endl; S = TX.readLine(); } } return 1; } bool SystemFile::preDeviceSection( ANetNode * NN ) { if( hasPreDeviceSection ) { QFile Fl( TemplDir + Name + "/predevicesection" ); if( ! Fl.open( IO_ReadOnly ) ) return 0; // error QTextStream TX( &Fl ); QString Out; QString S = TX.readLine(); while( ! TX.eof() ) { Out = S.arg(NN->name()); (*this) << Out << endl; S = TX.readLine(); } } return 1; } bool SystemFile::postDeviceSection( ANetNode * NN ) { if( hasPostDeviceSection ) { QFile Fl( TemplDir + Name + "/postdevicesection" ); if( ! Fl.open( IO_ReadOnly ) ) return 0; // error QTextStream TX( &Fl ); QString Out; QString S = TX.readLine(); while( ! TX.eof() ) { Out = S.arg(NN->name()); (*this) << Out << endl; S = TX.readLine(); } } return 1; } diff --git a/noncore/settings/networksettings2/opie-networksettings2.postinst b/noncore/settings/networksettings2/opie-networksettings2.postinst index ce43274..d1d98ac 100755 --- a/noncore/settings/networksettings2/opie-networksettings2.postinst +++ b/noncore/settings/networksettings2/opie-networksettings2.postinst @@ -1,9 +1,9 @@ #!/bin/sh QTPB=/opt/QtPalmtop/bin [ ! -L ${QTPB}/networksettings2-request ] && ln -sf ${QTPB}/networksettings2 ${QTPB}/networksettings2-request -qcop QPE/TaskBar "reloadApps()" +${QTPB}/qcop QPE/TaskBar "reloadApps()" exit 0 diff --git a/noncore/settings/networksettings2/opietooth2/OTDevice.cpp b/noncore/settings/networksettings2/opietooth2/OTDevice.cpp index 62f17a0..c6f7d5e 100644 --- a/noncore/settings/networksettings2/opietooth2/OTDevice.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTDevice.cpp @@ -1,256 +1,256 @@ #include <qdir.h> #include <qfileinfo.h> #include <bluezlib.h> /* OPIE */ #include <opie2/odevice.h> #include <opie2/oprocess.h> #include <opie2/odebug.h> #include <OTDevice.h> using namespace Opie::Core; using namespace Opietooth2; using Opie::Core::OProcess; OTDevice::OTDevice( OTGateway * _OT ) : QObject(0, "device") { // initialize OT = _OT; // detect bluetooth type QString a, b; // fake unsigned long c; // fake detectDeviceType( a, b, c ); if( needsAttach() ) { // requires HCIATTACH // pid of hciattach m_hciattachPid = getPidOfHCIAttach(); m_hciattach = 0; if( m_hciattachPid == 0 ) { // no pid -> not attached m_deviceNr = -1; } else { // system enabled // currently no way to figure out which attach produce which // hci m_deviceNr = 0; } } else { m_deviceNr = 0; } } OTDevice::~OTDevice(){ if( needsAttach() && m_hciattach ) { // does not auto stop bluetooth m_hciattach->detach(); delete m_hciattach; } } bool OTDevice::attach(){ if( needsAttach() && m_hciattachPid == 0 ) { QString Dev, Mode; unsigned long Spd; detectDeviceType( Dev, Mode, Spd ); // not yet started m_hciattach = new OProcess(); *m_hciattach << "hciattach"; *m_hciattach << "-p"; // so that it prints its pid *m_hciattach << Dev << Mode << QString().setNum(Spd); connect( m_hciattach, SIGNAL(receivedStdout(Opie::Core::OProcess*, char*, int ) ), this, SLOT (slotStdOut(Opie::Core::OProcess*,char*,int) ) ); connect( m_hciattach, SIGNAL(receivedStderr(Opie::Core::OProcess*, char*, int ) ), this, SLOT (slotStdErr(Opie::Core::OProcess*,char*,int) ) ); // we need to start this in 'dontcare' mode because // if qpe exists we want the hci to keep running if( ! m_hciattach->start( OProcess::DontCare, OProcess::AllOutput ) ){ emit error( tr( "Could not start hciattach" ) ); delete m_hciattach; m_hciattach = 0; return FALSE; } } return TRUE; } bool OTDevice::detach(){ if( needsAttach() && m_hciattachPid ) { if( m_hciattach ) { delete m_hciattach; m_hciattach = 0; } if( kill( m_hciattachPid, 9) < 0 ) { - owarn << "could not stop " << errno << oendl; + odebug << "could not stop " << errno << oendl; emit error( tr( "Could not stop process" ) ); return FALSE; } m_hciattachPid = 0; emit isEnabled( m_deviceNr, 0 ); m_deviceNr = -1; } return TRUE; } bool OTDevice::isAttached()const{ return ! needsAttach() || m_hciattachPid != 0; } bool OTDevice::checkAttach(){ if( ! needsAttach() ) { m_deviceNr = 0; emit isEnabled( 0, 1 ); return TRUE; } if( m_hciattachPid ) { QString S; S.setNum( m_hciattachPid ); QDir D( "/proc" ); if( !D.exists( S ) ) { // down m_hciattachPid = 0; emit isEnabled( m_deviceNr, 0 ); m_deviceNr = -1; } } else { // check m_hciattachPid = getPidOfHCIAttach(); if ( m_hciattachPid ) { m_deviceNr = 0; emit isEnabled( m_deviceNr, 1 ); } } return m_hciattachPid != 0; } void OTDevice::slotStdOut(OProcess* proc, char* , int ) { if( proc == m_hciattach ) { m_hciattach->detach(); // system enabled // currently no way to figure out which attach produce which // hci if( m_deviceNr == -1 ) { m_deviceNr = 0; emit isEnabled( m_deviceNr, 1 ); } } } void OTDevice::slotStdErr(OProcess* proc, char* chars, int len) { if(proc == m_hciattach && len >= 1 ){ // collect output QCString string( chars, len+1 ); // \0 == +1 QString m_output; m_output.append( string.data() ); - owarn << m_output << oendl; + odebug << m_output << oendl; } } pid_t OTDevice::getPidOfHCIAttach( void ) { if( needsAttach() ) { // not yet attached -> perhaps now ? // load /proc dir and check if command name contains hciattach QRegExp R("[0-9]+"); QDir ProcDir( "/proc" ); QFileInfo FI; QStringList EL = ProcDir.entryList( QDir::Dirs ); // print it out for ( QStringList::Iterator it = EL.begin(); it != EL.end(); ++it ) { if( R.match( (*it) ) >= 0 ) { // is pid // get command being executed FI.setFile( ProcDir.path()+"/"+ (*it) + "/exe" ); // get the link if( FI.readLink().right( 9 ) == "hciattach" ) { // this is hci attach process return (*it).toULong(); break; } } } } return 0; } void OTDevice::detectDeviceType( QString & Device, QString & Mode, unsigned long & Speed ) { // detect device type and determine parms - owarn << "Detecting device" << oendl; + odebug << "Detecting device" << oendl; switch ( ODevice::inst()->model() ) { case Model_iPAQ_H39xx: Device = "/dev/tts/1"; Mode = "bcsp"; Speed = 921600; NeedsAttach = 1; break; case Model_iPAQ_H5xxx: Device = "/dev/tts/1"; Mode = "any"; Speed = 921600; NeedsAttach = 1; break; case Model_GenuineIntel : Device = ""; Mode = ""; Speed = 0; NeedsAttach = 0; break; default: Device = "/dev/ttySB0"; Mode = "bcsp"; Speed = 230400; NeedsAttach = 1; break; } } QString OTDevice::getRFCommDevicePattern( void ) { QDir D( "/dev/bluetooth/rfcomm" ); if( D.exists() ) { // devfs return QString( "/dev/bluetooth/rfcomm/%1" ); } // regular 'dev' directory return QString( "/dev/rfcomm%1" ); } diff --git a/noncore/settings/networksettings2/opietooth2/OTDriver.cpp b/noncore/settings/networksettings2/opietooth2/OTDriver.cpp index 8bd7919..a7ee662 100644 --- a/noncore/settings/networksettings2/opietooth2/OTDriver.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTDriver.cpp @@ -1,744 +1,744 @@ /*************************************************************************** * Copyright (C) 2003 by Mattia Merzi * * ottobit@ferrara.linux.it * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * ***************************************************************************/ #include <opie2/odebug.h> #include <qtimer.h> #include <sys/poll.h> #include <bluezlib.h> #include <OTGateway.h> #include <OTDriver.h> #include <OTHCISocket.h> using namespace Opietooth2; static struct { const char *str; unsigned short rev; } csr_map[] = { { "HCI 11.2 (bc01b)", 114 }, { "HCI 11.3 (bc01b)", 115 }, { "HCI 12.1 (bc01b)", 119 }, { "HCI 12.3 (bc01b)", 134 }, { "HCI 12.7 (bc01b)", 188 }, { "HCI 12.8 (bc01b)", 218 }, { "HCI 12.9 (bc01b)", 283 }, { "HCI 13.10 (bc01b)", 309 }, { "HCI 13.11 (bc01b)", 351 }, { "HCI 16.4 (bc01b)", 523 }, { "HCI 14.3 (bc02x)", 272 }, { "HCI 14.6 (bc02x)", 336 }, { "HCI 14.7 (bc02x)", 373 }, { "HCI 14.8 (bc02x)", 487 }, { "HCI 15.3 (bc02x)", 443 }, { "HCI 16.4 (bc02x)", 525 }, { NULL, 0} }; static char *services[] = { "Positioning", "Networking", "Rendering", "Capturing", "Object Transfer", "Audio", "Telephony", "Information" }; static char *major_devices[] = { "Miscellaneous", "Computer", "Phone", "LAN Access", "Audio/Video", "Peripheral", "Imaging", "Uncategorized" }; typedef struct { short Minor; const char * Description; } ClassMap_t; static ClassMap_t MapMiscClass[] = { { -1, "" } }; static ClassMap_t MapUnclassifiedClass[] = { { -1, "" } }; static ClassMap_t MapComputerClass[] = { { 0, "Uncategorized" } , { 1, "Desktop workstation" } , { 2, "Server" } , { 3, "Laptop" } , { 4, "Handheld" } , { 5, "Palm" } , { 6, "Wearable" }, { -1, 0 } }; static ClassMap_t MapPhoneClass[] = { { 0, "Uncategorized" }, { 1, "Cellular" }, { 2, "Cordless" }, { 3, "Smart phone" }, { 4, "Wired modem or voice gateway" }, { 5, "Common ISDN Access" }, { 6, "Sim Card Reader" }, { -1, 0 } }; static ClassMap_t MapAVClass[] = { { 0, "Uncategorized" }, { 1, "Device conforms to the Headset profile" }, { 2, "Hands-free" }, { 3, 0 }, { 4, "Microphone" }, { 5, "Loudspeaker" }, { 6, "Headphones" }, { 7, "Portable Audio" }, { 8, "Car Audio" }, { 9, "Set-top box" }, { 10, "HiFi Audio Device" }, { 11, "VCR" }, { 12, "Video Camera" }, { 13, "Camcorder" }, { 14, "Video Monitor" }, { 15, "Video Display and Loudspeaker" }, { 16, "Video Conferencing" }, { 17, 0 }, { 18, "Gaming/Toy" }, { -1, 0 } }; static ClassMap_t MapPeripheralClass[] = { { 16, "Keyboard" }, { 32, "Pointing device" }, { 48, "Combo keyboard/pointing device" }, { -1, 0 } }; typedef struct { int Major; ClassMap_t * Map; } MainClassMap_t; static MainClassMap_t MainClasses[] = { { 0, MapMiscClass }, { 1, MapComputerClass }, { 2, MapPhoneClass }, { 3, 0 }, // special case { 4, MapAVClass }, { 5, MapPeripheralClass }, { 6, 0 }, // special case { 63, MapUnclassifiedClass }, { -1, 0 } }; OTDriver::OTDriver( OTGateway * _OT, struct hci_dev_info* di) : QObject( _OT ), Address() { OT = _OT; IsUp = 0; Socket = 0; init(di); - owarn << "Driver " << devname() << oendl; + odebug << "Driver " << devname() << oendl; AutoClose = new QTimer( this ); connect( AutoClose, SIGNAL( timeout() ), this, SLOT( SLOT_CloseFd() ) ); } OTDriver::~OTDriver() { closeSocket(); SLOT_CloseFd(); } void OTDriver::SLOT_CloseFd( void ){ if ( isOpen() ) { AutoClose->stop(); ::close( fd() ); setfd( -1 ); } } void OTDriver::init(struct hci_dev_info* di) { Dev = di->name; setDevId(di->dev_id); setType(di->type); setFlags(di->flags); Address.setBDAddr( di->bdaddr ); setFeatures(di->features); setfd( -1 ); // not open Manufacturer = ""; } // internal reinitialize void OTDriver::reinit() { bool Old; Old = IsUp; if( currentState() < 0 ) return; if( Old != IsUp ) { // state changes emit stateChange( this, IsUp ); } } // requested by application int OTDriver::currentState() { struct hci_dev_info di; // uint16_t tmp_dev_id = device_info.dev_id; // bzero(&device_info,sizeof(struct hci_dev_info)); // device_info.dev_id = tmp_dev_id; memset( &di, 0, sizeof( di ) ); di.dev_id = Dev_id; if( ioctl( OT->getSocket(), HCIGETDEVINFO, (void*)&di) < 0 ) { SLOT_CloseFd(); return -1; } else { // load new info init(&di); } return IsUp; } bool OTDriver::open() { // (re)start single shot close AutoClose->start( 30000, TRUE ); if( isOpen() ) // is open return 1; setfd(hci_open_dev(devId())); if (fd() < 0) { emit error( tr( "Can't open device %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); return 0; } return 1; } QString OTDriver::name() { char name[1000]; if( ! open() ) { return tr("Cannot open"); } if (hci_read_local_name( fd(), sizeof(name), name, 1000) < 0) { if (errno != ETIMEDOUT) { emit error( tr("Can't read local name on %1. %2 : %3. Default to %4" ). arg( devname() ). arg( errno ). arg( strerror(errno) ). arg( devname() ) ); } // ETIMEDOUT error is quite normal, device is down ... I think ! :) strcpy(name,devname().latin1()); } return QString(name); } void OTDriver::setFlags(unsigned long flags) { // kdDebug() << "Setting OTDriver Values ..." << endl; IsUp = BTVALUE(hci_test_bit(HCI_UP, &flags)); if (isUp()) { setIScan(BTVALUE(hci_test_bit(HCI_ISCAN, &flags))); setPScan(BTVALUE(hci_test_bit(HCI_PSCAN, &flags))); setAuthentication(BTVALUE(hci_test_bit(HCI_AUTH, &flags))); setEncryption(BTVALUE(hci_test_bit(HCI_ENCRYPT, &flags))); } else { setIScan(BT_UNKNOWN); setPScan(BT_UNKNOWN); setAuthentication(BT_UNKNOWN); setEncryption(BT_UNKNOWN); } } QString OTDriver::revision() { struct hci_version ver; if( ! open() ) { return tr("Cannot open"); } if (hci_read_local_version(fd(), &ver, 1000) < 0) { emit error( tr( "Can't read revision info on %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); return QString(); } setManufacturer(ver.manufacturer); switch (ver.manufacturer) { case 0: return getRevEricsson(); break; case 10: return getRevCsr(ver.hci_rev); break; default: return tr( "Unsupported manufacturer" ); break; } } QString OTDriver::getRevEricsson() { char revision[102]; struct hci_request rq; if( ! open() ) { return QString( "Cannot open" ); } memset(&rq, 0, sizeof(rq)); rq.ogf = 0x3f; rq.ocf = 0x000f; rq.cparam = NULL; rq.clen = 0; rq.rparam = &revision; rq.rlen = sizeof(revision); if (hci_send_req(fd(), &rq, 1000) < 0) { emit error( tr( "Can't read revision info on %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); return QString(); } return QString( revision+1 ); } QString OTDriver::getRevCsr( unsigned short rev) { int i; for (i = 0; csr_map[i].str; i++) if (csr_map[i].rev == rev) { return QString( csr_map[i].str ); } return tr( "Unknown firmware" ); } int OTDriver::reset() { if( ! open() ) { return 0; } if( ioctl(fd(), HCIDEVRESET, devId()) < 0 ) { if( errno != EALREADY ) { emit error( tr( "Reset failed for %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); if (errno == EACCES) { return EACCES; } } } return 0; } void OTDriver::setUp( bool M ) { if( M && ! isUp() ) { bringUp(); } else if( ! M && isUp() ) { bringDown(); } } void OTDriver::bringUp() { - owarn << "bringUp : " << Dev << oendl; + odebug << "bringUp : " << Dev << oendl; if( ! open() ) { return; } if (! isUp()) { if( ioctl(fd(), HCIDEVUP, devId()) < 0 ) { if( errno != EALREADY ) { emit error( tr( "Cannot bring interface %1 up. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); } return; } // have to wait a bit for the 'up' to become active QTimer::singleShot( 3000, this, SLOT( reinit() ) ); } } void OTDriver::bringDown() { - owarn << "bringDown : " << Dev << oendl; + odebug << "bringDown : " << Dev << oendl; if( ! open() ) { return; } if ( isUp() ) { if( ioctl(fd(), HCIDEVDOWN, devId()) < 0 ) { if( errno != EALREADY ) { emit error( tr( "Cannot bring interface %1 down. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); } return; } reinit(); } } void OTDriver::setScanMode(bool iscan, bool pscan) { struct hci_dev_req dr; if( ! open() ) { return; } dr.dev_id = devId(); dr.dev_opt = SCAN_DISABLED; if( iscan&&(!pscan) ) dr.dev_opt = SCAN_INQUIRY; else if( pscan&&(!iscan) ) dr.dev_opt = SCAN_PAGE; else if( pscan&&iscan ) dr.dev_opt = SCAN_PAGE | SCAN_INQUIRY; if( ioctl(fd(), HCISETSCAN, (unsigned long)&dr) < 0 ) { if( errno != EALREADY ) { emit error( tr( "Can't set scan mode on %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); } return; } reinit(); } void OTDriver::changeDevName(const char* name) { if( ! open() ) { return; } if (hci_write_local_name(fd(), name, 1000) < 0) { emit error( tr( "Can't change local name on %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); } } void OTDriver::changeAuthentication(bool _auth) { struct hci_dev_req dr; if( ! open() ) { return; } dr.dev_id = devId(); dr.dev_opt = _auth?AUTH_ENABLED:AUTH_DISABLED; if (ioctl(fd(),HCISETAUTH,(unsigned long)&dr) < 0) { if( errno != EALREADY ) { emit error( tr( "Can't change authentication on %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); } return; } reinit(); } void OTDriver::changeEncryption(bool _encrypt) { struct hci_dev_req dr; if( ! open() ) { return; } dr.dev_id = devId(); dr.dev_opt = _encrypt?ENCRYPT_P2P:ENCRYPT_DISABLED; if (ioctl(fd(),HCISETENCRYPT,(unsigned long)&dr) < 0) { if( errno != EALREADY ) { emit error( tr( "Can't change encryption on %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); } return; } reinit(); } void OTDriver::changeClass ( unsigned char service, unsigned char major, unsigned char minor ) { unsigned long cod = 0; cod = (service << 16) | (major << 8) | (minor ) ; if( ! open() ) { return; } if ( hci_write_class_of_dev(fd(),cod,1000) < 0 ) { emit error( tr( "Can't change class informations for %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); return; } } void OTDriver::getClass( QString & service, QString & device ) { unsigned char cls[3]; if( ! open() ) { return; } if ( hci_read_class_of_dev(fd(),cls,1000) < 0 ) { emit error( tr( "Can't read class information for %1. %2 : %3" ). arg( devname() ). arg( errno ). arg( strerror(errno) ) ); return; } if( cls[2] ) { int first = 1; for ( unsigned int s = 0; s < sizeof(*services); s++) { if (cls[2] & (1 << s)) { if( !first ) service += ", "; service += services[s]; first = 0; } } } else { service = "unspecified"; } MainClassMap_t * MCM = MainClasses; int major = cls[1] & 0x1f; int minor = cls[0] >> 2; if( (unsigned)(cls[1] & 0x1f) > sizeof(*major_devices)) { device = tr("Invalid Device Class"); return; } device = major_devices[cls[1] & 0x1f]; while( MCM->Major != -1 ) { if( major == MCM->Major ) { // this class ClassMap_t * CM = MCM->Map; if( MCM->Map ) { while( CM->Minor != -1 ) { if( minor == CM->Minor ) { break; } CM ++; } device = CM->Description; } else { // special case if( major == 3 ) { /* lan access */ if( minor == 0 ) { device = "Uncategorized"; } else { switch( minor / 8 ) { case 0: device = "Fully available"; break; case 1: device = "1-17% utilized"; break; case 2: device = "17-33% utilized"; break; case 3: device = "33-50% utilized"; break; case 4: device = "50-67% utilized"; break; case 5: device = "67-83% utilized"; break; case 6: device = "83-99% utilized"; break; case 7: device = "No service available"; break; } } } else if( major == 6 ) { /* imaging */ if (minor & 4) device = "Display"; if (minor & 8) device = "Camera"; if (minor & 16) device = "Scanner"; if (minor & 32) device = "Printer"; } } break; } MCM ++; } if( MCM->Major == -1 ) { device = "Unknown (reserved) minor device class"; } } QString OTDriver::strType() { return QString( hci_dtypetostr(Type) ); } void OTDriver::setFeatures( unsigned char * _f) { Features = lmp_featurestostr(_f, NULL, 255); } void OTDriver::setManufacturer(int compid) { Manufacturer = bt_compidtostr(compid); } OTHCISocket * OTDriver::openSocket( void ) { if( ! Socket ) { - owarn << "Open HCI socket to " << devname() << oendl; + odebug << "Open HCI socket to " << devname() << oendl; Socket = new OTHCISocket( this ); } return Socket; } void OTDriver::closeSocket( void ) { if( Socket ) { - owarn << "Close HCI socket to " << devname() << oendl; + odebug << "Close HCI socket to " << devname() << oendl; delete Socket; Socket = 0; } } QString OTDriver::getPeerName( const OTDeviceAddress & PAddr ) { QString S; char name[100 ]; if( ! open() ) { return QString("N/A"); } if( hci_read_remote_name( fd(), &(PAddr.getBDAddr()), sizeof(name), name, 100000 ) < 0 ) { return QString( "N/A" ); } return QString( name ); } long OTDriver::getLinkQuality( const OTDeviceAddress & Addr ) { struct hci_conn_info_req *cr; struct hci_request rq; read_rssi_rp rp; uint16_t handle; if( ! open() ) { return 0; } cr = (struct hci_conn_info_req *)malloc( sizeof(*cr) + sizeof(struct hci_conn_info)); if (!cr) return 0; bacpy( &(cr->bdaddr), &(Addr.getBDAddr()) ); cr->type = ACL_LINK; if (ioctl( fd(), HCIGETCONNINFO, (unsigned long) cr) < 0) { - owarn << "Get connection info failed" << oendl; + odebug << "Get connection info failed" << oendl; free(cr); return 0; } handle = htobs(cr->conn_info->handle); free(cr); memset(&rq, 0, sizeof(rq)); rq.ogf = OGF_STATUS_PARAM; rq.ocf = OCF_READ_RSSI; rq.cparam = &handle; rq.clen = 2; rq.rparam = &rp; rq.rlen = GET_LINK_QUALITY_RP_SIZE; if (hci_send_req( fd(), &rq, 100) < 0) { - owarn << "Get connection info failed" << oendl; + odebug << "Get connection info failed" << oendl; return 0; } if( rp.status ) { - owarn << QString().sprintf("HCI get_link_quality cmd failed (0x%2.2X)", rp.status) << oendl; + odebug << QString().sprintf("HCI get_link_quality cmd failed (0x%2.2X)", rp.status) << oendl; return 0; } return rp.rssi+50; } diff --git a/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp b/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp index f703834..e5af742 100644 --- a/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTDriverList.cpp @@ -1,86 +1,86 @@ /*************************************************************************** * Copyright (C) 2003 by Mattia Merzi * * ottobit@ferrara.linux.it * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * ***************************************************************************/ #include <malloc.h> #include <bluezlib.h> #include <opie2/odebug.h> #include <OTDriverList.h> #include <OTGateway.h> #include <OTDriver.h> using namespace Opietooth2; OTDriverList::OTDriverList( OTGateway * _OT ) : QVector<OTDriver>() { OT = _OT; setAutoDelete( true ); } OTDriverList::~OTDriverList() { } void OTDriverList::update() { struct hci_dev_list_req *dl; struct hci_dev_req *dr; struct hci_dev_info di; int cur; dl = 0; cur = 0; do { cur += 5; dl = (struct hci_dev_list_req*) ::realloc( dl, sizeof( struct hci_dev_list_req ) + ( cur * sizeof(struct hci_dev_req) ) ); if( dl == 0 ) { // memory problem exit(1); } dl->dev_num = cur; if( ioctl( OT->getSocket(), HCIGETDEVLIST, (void*)dl) ) { - owarn << "WARNING : cannot read device list. " + odebug << "WARNING : cannot read device list. " << errno << strerror( errno ) << oendl; return; } // if num == cur perhaps we did not get all devices yet } while( dl->dev_num == cur ); if( dl->dev_num != count() ) { // new or missing devices clear(); dr = dl->dev_req; resize( dl->dev_num ); for( cur=0; cur < dl->dev_num; cur ++) { memset( &di, 0, sizeof( di ) ); di.dev_id = (dr+cur)->dev_id; // get device info if( ioctl( OT->getSocket(), HCIGETDEVINFO, (void*)&di) != 0 ) continue; // uh ? insert( cur, new OTDriver( OT, &di ) ); } - owarn << "Found " << count() << " devices" << oendl; + odebug << "Found " << count() << " devices" << oendl; ::free( dl ); } } diff --git a/noncore/settings/networksettings2/opietooth2/OTGateway.cpp b/noncore/settings/networksettings2/opietooth2/OTGateway.cpp index 6531cf6..e8137dd 100644 --- a/noncore/settings/networksettings2/opietooth2/OTGateway.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTGateway.cpp @@ -1,650 +1,650 @@ #include <qmessagebox.h> #include <qfile.h> #include <qdir.h> #include <qtextstream.h> #include <qpixmap.h> #include <qvector.h> #include <qpe/resource.h> #include <opie2/odebug.h> #include <bluezlib.h> #include <OTDevice.h> #include <OTDriver.h> #include <OTInquiry.h> #include <OTDriverList.h> #include <OTDeviceAddress.h> #include <OTGateway.h> using namespace Opietooth2; // single instance OTGateway * OTGateway::SingleGateway = 0; int OTGateway::UseCount = 0; OTGateway * OTGateway::getOTGateway( void ) { if(SingleGateway == 0 ) { SingleGateway = new OTGateway(); } UseCount ++; return SingleGateway; } void OTGateway::releaseOTGateway( void ) { UseCount --; if( UseCount == 0 ) { delete SingleGateway; SingleGateway = 0; } } // open bluetooth system OTGateway::OTGateway( void ) : QObject( 0, "OTGateway" ), AllDrivers( this ), AllPeers() { ErrorConnectCount = 0; TheOTDevice = 0; Scanning = 0; AllPeersModified = 0; AllPeers.setAutoDelete( TRUE ); if ( ( HciCtl = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI)) < 0) { SLOT_ShowError( tr( "error opening hci socket" ) ); return; } // load all known devices updateDrivers(); // load all peers we have ever seen loadKnownPeers(); // iterate over drivers and find active connections // adding/updating peers loadActiveConnections(); // check every 4 seconds the state of BT timerEvent(0); RefreshTimer = -1; setRefreshTimer( 4000 ); // load known link keys readLinkKeys(); } // close bluetooth system OTGateway::~OTGateway( void ) { if( AllPeersModified ) { saveKnownPeers(); } if( Scanning ) delete Scanning; if( TheOTDevice ) delete TheOTDevice; if( HciCtl >= 0 ) { ::close( HciCtl ); } } void OTGateway::setRefreshTimer( int T ) { if( RefreshTimer != -1 ) { killTimer( RefreshTimer ); } if( T == 0 ) T = 4000; RefreshTimer = startTimer( T ); } OTDevice * OTGateway::getOTDevice( ) { if( TheOTDevice == 0 ) { // load bluetooth device and check state TheOTDevice = new OTDevice( this ); connect( TheOTDevice, SIGNAL( isEnabled( int, bool ) ), this, SLOT( SLOT_Enabled( int, bool ) ) ); connect( TheOTDevice, SIGNAL( error( const QString & ) ), this, SLOT( SLOT_ShowError( const QString & ) ) ); } return TheOTDevice; } // start bluetooth (if stopped) // return TRUE if started void OTGateway::SLOT_SetEnabled( bool Mode ) { if( Mode ) { SLOT_Enable(); return; } SLOT_Disable(); } void OTGateway::SLOT_Enable() { getOTDevice()->attach(); } void OTGateway::SLOT_Disable() { getOTDevice()->detach(); } bool OTGateway::needsEnabling() { return getOTDevice()->needsAttach(); } bool OTGateway::isEnabled() { if( getOTDevice()->deviceNr() >= 0 && driver( getOTDevice()->deviceNr() )->isUp() ) return TRUE; // else check system return getOTDevice()->isAttached(); } void OTGateway::SLOT_ShowError( const QString & S ) { - owarn << S << oendl; + odebug << S << oendl; if( ErrorConnectCount > 0 ) { // pass error emit error( QString( "<p>" ) + S + "</p>" ); return; } QMessageBox::warning( 0, tr("OTGateway error"), S ); } void OTGateway::connectNotify( const char * S ) { if( S && strcmp( S, "error(const QString&)" ) == 0 ) { ErrorConnectCount ++; } } void OTGateway::disconnectNotify( const char * S ) { if( S && strcmp( S, "error(const QString&)" ) == 0 ) { ErrorConnectCount --; } } void OTGateway::timerEvent( QTimerEvent * ) { OTDriver * D; unsigned int oldc = AllDrivers.count(); bool old; AllDrivers.update(); if( oldc != AllDrivers.count() ) { updateDrivers(); } else { for( unsigned int i = 0; i < AllDrivers.count(); i ++ ) { D = AllDrivers[i]; old = D->isUp(); if( D->currentState() >= 0 ) { if( old != D->isUp() ) { emit stateChange( D, D->isUp() ); } } else { // if one driver is unable to provide info // we refresh all devices updateDrivers(); return; } } } } void OTGateway::SLOT_Enabled( int id, bool Up ) { - owarn << "device " << id << " state " << Up << oendl; + odebug << "device " << id << " state " << Up << oendl; if( Up ) { // device is up -> detect it updateDrivers(); if( (unsigned)id >= AllDrivers.count() ) { // to make sure that the driver really IS detected AllDrivers[id]->bringUp(); } } // if DOWN device already down emit deviceEnabled( Up ); } void OTGateway::updateDrivers( void ) { OTDriver * D; AllDrivers.update(); - owarn << "updated drivers. now " << AllDrivers.count() << oendl; + odebug << "updated drivers. now " << AllDrivers.count() << oendl; // connect signals for each driver for( unsigned int i = 0; i < AllDrivers.count(); i ++ ) { D = AllDrivers[i]; connect( D, SIGNAL( error( const QString & ) ), this, SLOT( SLOT_ShowError( const QString & ) ) ); connect( D, SIGNAL( stateChange( OTDriver *, bool ) ), this, SIGNAL( stateChange( OTDriver *, bool ) ) ); connect( D, SIGNAL( driverDisappeared( OTDriver * ) ), this, SLOT( SLOT_DriverDisappeared( OTDriver * ) ) ); } // verify main device too if( TheOTDevice ) TheOTDevice->checkAttach(); // set to default scanning hardware setScanWith( 0 ); emit driverListChanged(); } void OTGateway::SLOT_DriverDisappeared( OTDriver * D ) { - owarn << "Driver " << D->devname() << " when offline" << oendl; + odebug << "Driver " << D->devname() << " when offline" << oendl; updateDrivers(); } void OTGateway::scanNeighbourhood( OTDriver * D ) { if( Scanning ) { stopScanOfNeighbourhood(); } if( D ) { setScanWith( D ); } Scanning = new OTInquiry( scanWith() ); connect( Scanning, SIGNAL( peerFound( OTPeer *, bool )), this, SLOT( SLOT_PeerDetected( OTPeer *, bool ) ) ); connect( Scanning, SIGNAL( finished()), this, SLOT( SLOT_FinishedDetecting() ) ); // start scanning Scanning->inquire( 30.0 ); } OTPeer* OTGateway::findPeer( const OTDeviceAddress & Addr ) { for( unsigned int i = 0 ; i < AllPeers.count(); i ++ ) { if( AllPeers[i]->address() == Addr ) { return AllPeers[i]; } } return 0; } OTDriver* OTGateway::findDriver( const OTDeviceAddress & Addr ) { for( unsigned int i = 0 ; i < AllDrivers.count(); i ++ ) { if( AllDrivers[i]->address() == Addr ) { return AllDrivers[i]; } } return 0; } void OTGateway::SLOT_PeerDetected( OTPeer * P, bool IsNew ) { if( IsNew ) { // new peer - owarn << "New peer " << P->name() << oendl; + odebug << "New peer " << P->name() << oendl; addPeer( P ); } emit detectedPeer( P, IsNew ); } void OTGateway::addPeer( OTPeer * P ) { AllPeers.resize( AllPeers.size()+1); AllPeers.insert( AllPeers.size()-1, P ); AllPeersModified = 1; } void OTGateway::removePeer( OTPeer * P ) { int i = AllPeers.find( P ); if( i ) { AllPeers.remove( i ); AllPeersModified = 1; } } void OTGateway::stopScanOfNeighbourhood( void ) { if( Scanning ) { delete Scanning; Scanning = 0; } } void OTGateway::SLOT_FinishedDetecting() { stopScanOfNeighbourhood(); emit finishedDetecting(); } const char * OTGateway::deviceTypeToName( int cls ) { switch ( (cls & 0x001F00) >> 8) { case 0x00: return "misc"; case 0x01: return "computer"; case 0x02: return "phone"; case 0x03: return "lan"; case 0x04: return "av"; case 0x05: return "peripheral"; case 0x06: return "imaging"; case 0x07: default : break; } return "unknown"; } PANConnectionVector OTGateway::getPANConnections( void ) { PANConnectionVector V; struct bnep_connlist_req req; struct bnep_conninfo ci[48]; V.setAutoDelete(TRUE); int ctl = socket(PF_BLUETOOTH, SOCK_RAW, BTPROTO_BNEP); if (ctl < 0) { - owarn << "Failed to open control socket" << oendl; + odebug << "Failed to open control socket" << oendl; return V; } req.cnum = 48; req.ci = ci; if (ioctl(ctl, BNEPGETCONNLIST, &req)) { - owarn << "Failed to get connection list" << oendl; + odebug << "Failed to get connection list" << oendl; ::close( ctl ); return V; } for ( unsigned i=0; i < req.cnum; i++) { V.resize( V.size() + 1 ); if( ci[i].role == BNEP_SVC_PANU ) { // we are the client V.insert( V.size()-1, new OTPANConnection( ci[i].device, batostr((bdaddr_t *) ci[i].dst) ) ); } } ::close( ctl ); return V; } struct link_key { bdaddr_t sba; bdaddr_t dba; uint8_t key[16]; uint8_t type; time_t time; }; void OTGateway::readLinkKeys( void ) { struct link_key k; int rv; AllKeys.truncate(0); QFile F( "/etc/bluetooth/link_key" ); if( ! F.open( IO_ReadOnly ) ) { emit error( tr("Cannot open link_key file") ); return; } while( 1 ) { rv = F.readBlock( (char *)&k, sizeof( k ) ); if( rv == 0 ) // EOF break; if( rv < 0 ) { emit error( tr("Read error in link key file") ); } AllKeys.resize( AllKeys.size()+1 ); AllKeys[ AllKeys.size()-1 ].From.setBDAddr( k.sba ); AllKeys[ AllKeys.size()-1 ].To.setBDAddr( k.dba ); } } bool OTGateway::removeLinkKey( unsigned int Index ) { OTLinkKey & LK = AllKeys[Index]; struct link_key k; int rv; QFile F( "/etc/bluetooth/link_key" ); QFile OutF( "/etc/bluetooth/newlink_key" ); if( ! F.open( IO_ReadOnly ) ) { emit error( tr("Cannot open link_key file") ); return 0; } if( ! OutF.open( IO_WriteOnly | IO_Truncate ) ) { emit error( tr("Cannot open temporary link_key file") ); return 0; } while( 1 ) { rv = F.readBlock( (char *)&k, sizeof( k ) ); if( rv == 0 ) // EOF break; if( rv < 0 ) { emit error( tr("Read error in link key file") ); return 0; } if( LK.from() != OTDeviceAddress( k.sba ) || LK.to() != OTDeviceAddress( k.dba ) ) { // copy OutF.writeBlock( (char *)&k, sizeof( k ) ); } // else remove this key } // rename files QDir D( "/etc/bluetooth" ); D.remove( "link_key" ); D.rename( "newlink_key", "link_key" ); // restart hcid system( "/etc/init.d/hcid stop" ); system( "/etc/init.d/hcid start" ); // remove from table if( Index < (AllKeys.size()-1) ) { // collapse array AllKeys[Index] = AllKeys[AllKeys.size()-1]; } // remove last element AllKeys.resize( AllKeys.size()-1 ); return 1; } #define MAXCONNECTIONS 10 void OTGateway::loadActiveConnections( void ) { struct hci_conn_list_req *cl; struct hci_conn_info *ci; OTDeviceAddress Addr; OTPeer * P; if (!(cl = (struct hci_conn_list_req *)malloc( MAXCONNECTIONS * sizeof(*ci) + sizeof(*cl)))) { emit error( tr("Can't allocate memory") ); return; } memset( cl, 0, MAXCONNECTIONS * sizeof(*ci) + sizeof(*cl) ); for( unsigned int i = 0; i < AllDrivers.count(); i ++ ) { if( ! AllDrivers[i]->isUp() ) { continue; } // driver is up -> check connections cl->dev_id = AllDrivers[i]->devId(); cl->conn_num = MAXCONNECTIONS; ci = cl->conn_info; if (ioctl( getSocket(), HCIGETCONNLIST, (void *) cl)) { emit error( tr("Can't get connection list") ); break; } for ( int k = 0; k < cl->conn_num; k++, ci++) { if( ci->state != BT_CONNECTED ) { // not yet connected continue; } Addr.setBDAddr( ci->bdaddr ); P = findPeer( Addr ); if( ! P ) { // peer not yet known -> add P = new OTPeer( this ); addPeer( P ); P->setAddress( Addr ); // infoQueue.push_back(info); P->setName( AllDrivers[i]->getPeerName( Addr ) ); } P->setState( OTPeer::Peer_Up ); P->setConnectedTo( AllDrivers[i] ); } } free( cl ); } void OTGateway::loadKnownPeers( void ) { QDir SaveDir = QDir::home(); if( ! SaveDir.exists( "Settings" ) ) { return; } SaveDir.cd( "Settings" ); if( ! SaveDir.exists( "opietooth" ) ) { return; } SaveDir.cd( "opietooth" ); QFile F( SaveDir.path() + "/SeenDevices.conf" ); if( F.open( IO_ReadOnly ) ) { QTextStream TS(&F); long count; count = TS.readLine().toLong(); while( count > 0 ) { addPeer( new OTPeer( TS, this ) ); count --; } } AllPeersModified = 0; } void OTGateway::saveKnownPeers( void ) { QDir SaveDir = QDir::home(); if( ! SaveDir.exists( "Settings" ) ) { SaveDir.mkdir( "Settings" ); } SaveDir.cd( "Settings" ); if( ! SaveDir.exists( "opietooth" ) ) { SaveDir.mkdir( "opietooth" ); } SaveDir.cd( "opietooth" ); QFile F( SaveDir.path() + "/SeenDevices.conf" ); if( F.open( IO_WriteOnly | IO_Truncate ) ) { QTextStream TS(&F); QString S; TS << AllPeers.count() << endl; for( unsigned int i = 0; i < AllPeers.count(); i ++ ) { AllPeers[i]->save( TS ); } AllPeersModified = 0; } AllPeersModified = 0; } int OTGateway::connectedToRFCommChannel( const OTDeviceAddress & Addr, int channel ) { int s; if( (s = ::socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_RFCOMM)) < 0 ) { emit error( tr("Can't open RFCOMM control socket") ); return 0; } // get all rfcomm devices { struct rfcomm_dev_list_req *dl; struct rfcomm_dev_info *di, *dr; int i; dl = (struct rfcomm_dev_list_req *)alloca( sizeof(*dl) + RFCOMM_MAX_DEV * sizeof(*di)); memset( dl, 0, sizeof(*dl) + RFCOMM_MAX_DEV * sizeof(*di) ); dl->dev_num = RFCOMM_MAX_DEV; di = dl->dev_info; diff --git a/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp b/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp index 471c3bf..1997b44 100644 --- a/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTHCISocket.cpp @@ -1,274 +1,274 @@ //-*-c++-*- /*************************************************************************** * Copyright (C) 2003 by Fred Schaettgen * * kdebluetooth@schaettgen.de * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * ***************************************************************************/ #include <qbuffer.h> #include <qtimer.h> #include <qdatastream.h> #include <opie2/odebug.h> #include <bluezlib.h> // #include "deviceaddress.h" #include <OTHCISocket.h> #include <OTDriver.h> using namespace Opietooth2; OTHCISocket::OTHCISocket( OTDriver * D ) : QObject( D, D->devname() ) { BStatusSet = false; Driver = D; HCIReadNotifier = 0; } OTHCISocket::~OTHCISocket() { close(); } void OTHCISocket::close() { - owarn << "OTHCISocket::close()" << oendl; + odebug << "OTHCISocket::close()" << oendl; if( HCIReadNotifier ) { delete HCIReadNotifier; } if( HCISocket.isValid() ) { HCISocket.close(); } } bool OTHCISocket::open() { - owarn << "OTHCISocket::open()" << oendl; + odebug << "OTHCISocket::open()" << oendl; int s; s = ::socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI); if (s < 0) { emit error( tr( "Error creating socket on %1 : %2 %3"). arg( Driver->devname() ). arg( errno ). arg( strerror(errno) ) ); return false; } /* Bind socket to the HCI device */ struct sockaddr_hci sa; sa.hci_family = AF_BLUETOOTH; sa.hci_dev = Driver->devId(); if (bind(s, (struct sockaddr *)&sa, sizeof(sa)) < 0) { ::close(s); emit error( tr( "Error binding to socket to %1 : %2 %3"). arg( Driver->devname() ). arg( errno ). arg( strerror(errno) ) ); return false; } struct hci_filter flt; hci_filter_clear(&flt); hci_filter_set_ptype(HCI_EVENT_PKT, &flt); hci_filter_all_events(&flt); if( setsockopt(s, SOL_HCI, HCI_FILTER, &flt, sizeof(flt)) < 0 ) { ::close(s); emit error( tr( "HCI filter setup failed on %1 : %2 %3"). arg( Driver->devname() ). arg( errno ). arg( strerror(errno) ) ); return false; } if( HCIReadNotifier ) { delete HCIReadNotifier; } HCISocket.setSocket(s, QSocketDevice::Datagram); HCIReadNotifier = new QSocketNotifier( s, QSocketNotifier::Read, this); connect( HCIReadNotifier, SIGNAL(activated(int)), this, SLOT(slotSocketActivated()) ); //connect(hciSocket, SIGNAL(error(int)), // this, SLOT(slotSocketError(int))); //connect(hciSocket, SIGNAL(connectionClosed()), // this, SLOT(slotConnectionClosed())); //hciSocket->setSocket(s); return true; } void OTHCISocket::slotSocketError(int e) { close(); emit error( tr( "HCI socket error 0x%1 on %1 : %2 %3"). arg(e,2,16). arg( Driver->devname() ). arg( errno ). arg( strerror(errno) ) ); } void OTHCISocket::slotSocketActivated() { QSocketDevice::Error err = HCISocket.error(); if( (err == QSocketDevice::NoError ) && ( HCISocket.isValid() ) ) { //kdDebug() << "HCI socket ready read." << endl; unsigned char buf[512]; int psize = HCISocket.readBlock((char*)buf, 512); if (psize <= 0) { slotSocketError(HCISocket.error()); HCISocket.close(); return; } //unsigned char packetType = buf[0]; unsigned char eventCode = buf[1]; unsigned char len = buf[2]; if (psize-3 == len) { QByteArray databuf; databuf.duplicate((char*)(buf+3), len); emit event(eventCode, databuf); if (eventCode == EVT_CMD_STATUS) { updateStatus( databuf ); } } else { - owarn << "Error reading hci packet: packetSize(" + odebug << "Error reading hci packet: packetSize(" << psize << ")-3 != dataSize(" << len << ")" << oendl; } } else if (err == QSocketDevice::NoError) { slotConnectionClosed(); } else { HCISocket.close(); slotSocketError(err); } } void OTHCISocket::updateStatus(const QByteArray& data) { QDataStream stream(data, IO_ReadOnly); stream.setByteOrder(QDataStream::LittleEndian); Q_UINT8 status, dummy; Q_UINT16 opcode; BStatusSet = true; stream >> status >> dummy >> opcode; //kdDebug() << "updatestatus opcode=" << uint32_t(opcode) << endl; LastStatus = status; LastStatusOgf = cmd_opcode_ogf(opcode); LastStatusOcf = cmd_opcode_ocf(opcode); } void OTHCISocket::slotConnectionClosed() { - owarn << "HCI connection closed." << oendl; + odebug << "HCI connection closed." << oendl; emit connectionClosed(); } void OTHCISocket::readEvent() { if (HCIReadNotifier) { slotSocketActivated(); } } bool OTHCISocket::sendCommand( unsigned char ogf, unsigned short ocf, QByteArray buf ) { QBuffer packet; QDataStream stream(&packet); stream.setByteOrder(QDataStream::LittleEndian); packet.open(IO_WriteOnly); if (buf.size() > 255) return false; //kdDebug() << "sendCommand. ogf=" << ogf << " ocf=" << ocf << endl; Q_UINT16 opcode = cmd_opcode_pack(ogf, ocf); Q_UINT8 pType = HCI_COMMAND_PKT; Q_UINT8 buflen = buf.size(); stream << pType << opcode << buflen; stream.writeRawBytes(buf.data(), buflen); packet.close(); HCISocket.writeBlock((const char*)packet.buffer(), packet.buffer().size()); return true; } bool OTHCISocket::readStatus( unsigned char ogf, unsigned short ocf, int *status, int timeout_ms) { QTimer timer; timer.start(timeout_ms, true); BStatusSet = false; while (timer.isActive() && HCISocket.isValid()) { - owarn << "OTHCISocket::readStatus()" << oendl; + odebug << "OTHCISocket::readStatus()" << oendl; bool timeout = false; if( HCISocket.bytesAvailable() == 0) { int rv = HCISocket.waitForMore(timeout_ms); timeout = (rv == 0); } if (!timeout) { slotSocketActivated(); } if( BStatusSet == true && ogf == LastStatusOgf && ocf == LastStatusOcf) { *status = LastStatus; - owarn << "OTHCISocket::readStatus(ogf=" + odebug << "OTHCISocket::readStatus(ogf=" << ogf << ",ocf=" << ocf << ",timeout=" << LastStatus << ")" << oendl; return true; } } - owarn << "OTHCISocket::readStatus(ogf=" + odebug << "OTHCISocket::readStatus(ogf=" << ogf << ",ocf=" << ocf << ",timeout=" << LastStatus << ") : timeout " << oendl; return false; } int OTHCISocket::socket() { return HCISocket.socket(); } diff --git a/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp b/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp index 8e94bbc..2bc63c7 100644 --- a/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTInquiry.cpp @@ -1,219 +1,219 @@ //-*-c++-*- /*************************************************************************** * Copyright (C) 2003 by Fred Schaettgen * * kdebluetooth@schaettgen.de * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * ***************************************************************************/ #include <qcstring.h> #include <qsocket.h> #include <qdatetime.h> #include <qtimer.h> #include <qthread.h> #include <qapplication.h> #include <bluezlib.h> #include <OTGateway.h> #include <OTDriver.h> #include <OTPeer.h> #include <OTHCISocket.h> #include <OTInquiry.h> #include <opie2/odebug.h> using namespace Opietooth2; #define max(a,b) (((a)>(b)) ? (a) : (b)) #define min(a,b) (((a)>(b)) ? (b) : (a)) OTInquiry::OTInquiry( OTDriver * Drv ) : QObject( Drv ) { reset(); InquiryTimeoutTimer = new QTimer(this); connect( InquiryTimeoutTimer, SIGNAL(timeout()), this, SLOT(slotInquiryTimeout())); Driver = Drv; Socket = Drv->openSocket(); Socket->open(); connect( Socket, SIGNAL( event(unsigned char, QByteArray)), this, SLOT(slotHCIEvent(unsigned char, QByteArray))); } OTInquiry::~OTInquiry() { stopInquiring(); } void OTInquiry::stopInquiring( void ) { if( Socket ) { - owarn << "Stop inquiry" << oendl; + odebug << "Stop inquiry" << oendl; Driver->closeSocket(); Socket = 0; } } bool OTInquiry::inquire( double timeout, int numResponses, int lap) { QByteArray cmdBuf(5); cmdBuf[0] = lap & 0xFF; cmdBuf[1] = (lap >> 8) & 0xFF; cmdBuf[2] = (lap >> 16) & 0xFF; cmdBuf[3] = max(0x01, min(0x30, int(timeout/1.28))); cmdBuf[4] = (unsigned char)numResponses; - owarn << "Send HCI inquiry command. wait for " << cmdBuf[3] << oendl; + odebug << "Send HCI inquiry command. wait for " << cmdBuf[3] << oendl; Socket->sendCommand(0x01, 0x0001, cmdBuf); int status; if( Socket->readStatus(0x01, 0x0001, &status)) { if (status == 0) { SuccessfullyStarted = true; InquiryTimeoutTimer->start( int(1000*(timeout+1.0)), true); return true; } else { QString S =QString().sprintf( "%x", status ); - owarn << "OTInquiry::inquiry() failed: 0x" << S << oendl; + odebug << "OTInquiry::inquiry() failed: 0x" << S << oendl; emit finished(); return false; } } else { - owarn << "OTInquiry::inquiry(): Timeout." << oendl; + odebug << "OTInquiry::inquiry(): Timeout." << oendl; return false; } } bool OTInquiry::isInquiring() { return InquiryTimeoutTimer->isActive(); } bool OTInquiry::isFinished() { return SuccessfullyStarted && SuccessfullyEnded; } void OTInquiry::reset() { SuccessfullyStarted = false; SuccessfullyEnded = false; //addrCache.clear(); //infoQueue.clear(); } void OTInquiry::onPeerFound( OTPeer * Peer, bool IsNew ) { emit peerFound( Peer, IsNew ); } void OTInquiry::slotInquiryTimeout() { emit error( tr( "Timeout while waiting for end of inquiry.") ); } void OTInquiry::slotHCIEvent(unsigned char eventCode, QByteArray buf) { - owarn << "OTInquiry: hci packet received: eventCode=" + odebug << "OTInquiry: hci packet received: eventCode=" << (unsigned int)eventCode << " packetLength=" << (unsigned int)buf.size() << oendl; unsigned char *data = (unsigned char*)buf.data(); switch (eventCode) { case EVT_INQUIRY_COMPLETE: { unsigned char status = data[0]; - owarn << "EVT_INQUIRY_COMPLETE status=" << status << oendl; + odebug << "EVT_INQUIRY_COMPLETE status=" << status << oendl; InquiryTimeoutTimer->stop(); if (status == 0) { if( SuccessfullyStarted == true) { - owarn << "OTInquiry ended successfully" << oendl; + odebug << "OTInquiry ended successfully" << oendl; SuccessfullyEnded = true; } emit finished(); } else { emit error( tr( "OTInquiry completed with error (code %1)" ). arg(status)); } } break; case EVT_INQUIRY_RESULT: { int numResults = data[0]; OTPeer * P = 0; bool IsNew; OTDeviceAddress Addr; QString N; inquiry_info *results = (inquiry_info*)(data+1); for (int n=0; n<numResults; n++) { Addr.setBDAddr( results[n].bdaddr ); - owarn << "INQUIRY_RESULT: " + odebug << "INQUIRY_RESULT: " << Addr.toString() << oendl; P = Driver->gateway()->findPeer( Addr ); if( P ) { // peer known if( P->state() != OTPeer::Peer_Up ) { P->setState( OTPeer::Peer_Up ); } IsNew = 0; } else { IsNew = 1; // push the address to the address queue // where it can be consumed by nextNeighbour() P = new OTPeer( Driver->gateway() ); P->setState( OTPeer::Peer_Up ); // we just detected it P->setAddress( Addr ); //if( addrCache.find(info.addr) == addrCache.end()) { // addrCache.insert(info.addr); P->setDeviceClass( (results[n].dev_class[0] << 16) | (results[n].dev_class[1] << 8) | (results[n].dev_class[2] << 0) ); // infoQueue.push_back(info); P->setName( Driver->getPeerName( Addr ) ); } // call the handler. Emits a signal if not overwritten onPeerFound( P, IsNew ); // } } } break; case EVT_CMD_STATUS : { int status = data[0]; int numHciCmdPkts = data[1]; int cmdOpcode = *((uint16_t*)(data+2)); - owarn << "EVT_CMD_STATUS status=" + odebug << "EVT_CMD_STATUS status=" << status << " numPkts=" << numHciCmdPkts << " cmdOpcode=" << cmdOpcode << oendl; if (cmdOpcode == OCF_INQUIRY) { } } break; } } diff --git a/noncore/settings/networksettings2/opietooth2/OTPeer.cpp b/noncore/settings/networksettings2/opietooth2/OTPeer.cpp index 0d7e943..2272f04 100644 --- a/noncore/settings/networksettings2/opietooth2/OTPeer.cpp +++ b/noncore/settings/networksettings2/opietooth2/OTPeer.cpp @@ -1,366 +1,366 @@ //-*-c++-*- /*************************************************************************** * Copyright (C) 2003 by Fred Schaettgen * * kdebluetooth@schaettgen.de * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * ***************************************************************************/ #include <assert.h> #include <sys/poll.h> #include <string.h> #include <bluezlib.h> #include <qarray.h> #include <qtextstream.h> #include <opie2/odebug.h> #include <OTDeviceAddress.h> #include <OTSDPAttribute.h> #include <OTSDPService.h> #include <OTPeer.h> #include <OTGateway.h> #include <OTDriver.h> using namespace Opietooth2; OTPeer::OTPeer( OTGateway * _OT ) { OT = _OT; State = Peer_Unknown; ConnectedTo = 0; } OTPeer::OTPeer( QTextStream & TS, OTGateway * _OT ) { OT = _OT; State = Peer_Unknown; ConnectedTo = 0; load( TS ); } OTPeer::~OTPeer( ) { } void OTPeer::updateServices( void ) { sdp_session_t *session; serviceList.clear(); - owarn << "Get services from " << Addr.toString() << oendl; + odebug << "Get services from " << Addr.toString() << oendl; session = sdp_connect( &(OTDeviceAddress::any.getBDAddr()), &(Addr.getBDAddr()), 0); if (!session) { - owarn << "sdp_connect(" + odebug << "sdp_connect(" << Addr.toString() << ") failed" << oendl; return; // error } uint32_t range = 0x0000ffff; sdp_list_t* attrId = sdp_list_append(0, &range); // search all public features uuid_t grp; sdp_uuid16_create( &grp, PUBLIC_BROWSE_GROUP ); sdp_list_t * search = sdp_list_append(0, &grp ); // get data from peer sdp_list_t* seq; if (sdp_service_search_attr_req( session, search, SDP_ATTR_REQ_RANGE, attrId, &seq ) ) { - owarn << "Service Search failed" << oendl; + odebug << "Service Search failed" << oendl; sdp_close(session); return; } sdp_list_free(attrId, 0); sdp_list_free(search, 0); // process result sdp_list_t* next = NULL; for (; seq; seq = next) { sdp_record_t *rec = (sdp_record_t *) seq->data; sdp_list_t* attrlist = rec->attrlist; AttributeVector alist; OTSDPService * service; service = new OTSDPService(); for (; attrlist; attrlist = attrlist->next) { int attrID = ((sdp_data_t*)(attrlist->data))->attrId; service->addAttribute( attrID, new OTSDPAttribute( (sdp_data_t*)(attrlist->data) ) ); } serviceList.resize( serviceList.size() + 1 ); serviceList.insert( serviceList.size() - 1, service ); next = seq->next; free(seq); sdp_record_free(rec); } sdp_close(session); } bool OTPeer::hasServiceClassID( const OTUUID & uuid) { for( unsigned int i = 0; i < serviceList.count(); i ++ ) { if( serviceList[i]->hasClassID(uuid)) return true; } return false; } /** Get a vector of Rfcomm channels of the services having "uuid" in the class ID List*/ QArray<int> OTPeer::rfcommList( const OTUUID & uuid) { QArray<int> rfcommList; unsigned int channel; for( unsigned int i = 0; i < serviceList.count(); i ++ ) { if( serviceList[i]->hasClassID(uuid)) { if( serviceList[i]->rfcommChannel(channel) ) { rfcommList.resize( rfcommList.size()+1 ); rfcommList[rfcommList.size()-1] = channel; } } } return rfcommList; } void OTPeer::save( QTextStream & TS ) { TS << "bdaddr " << address().toString() << endl; TS << "name " << name() << endl; TS << "class " << deviceClass() << endl; } void OTPeer::load( QTextStream & TS ) { QString S; S = TS.readLine(); setAddress( OTDeviceAddress( S.mid( 7 ) ) ); S = TS.readLine(); setName( S.mid( 5 ) ); S = TS.readLine(); setDeviceClass( S.mid( 6 ).toLong() ); } #define MAGICNR -99999 #define POLLDELAY 1000 #define PREMAGICNR (MAGICNR+POLLDELAY) void OTPeer::findOutState( int timeoutInSec, bool Force ) { ProbeFD = -1; if( Force && ConnectedTo == 0 ) { State = OTPeer::Peer_Unknown; } // else keep state or is connected to us if( State == OTPeer::Peer_Unknown ) { ProbePhase = 0; ProbeTimeout = timeoutInSec*1000; - owarn << "Ping " << address().toString() << oendl; + odebug << "Ping " << address().toString() << oendl; startTimer( POLLDELAY ); } else { ProbeTimeout = 0; startTimer( 0 ); } } #define PINGSIZE 20 void OTPeer::timerEvent( QTimerEvent * ev ) { ProbeTimeout -= POLLDELAY; if( State == OTPeer::Peer_Unknown ) { switch( ProbePhase ) { case 0 : // connect nonblock { struct sockaddr_l2 addr; if (( ProbeFD = ::socket(PF_BLUETOOTH, SOCK_RAW, BTPROTO_L2CAP)) < 0) { ProbeTimeout = 0; break; } memset(&addr, 0, sizeof(addr)); addr.l2_family = AF_BLUETOOTH; addr.l2_bdaddr = OTDeviceAddress::any.getBDAddr(); if( ::bind( ProbeFD, (struct sockaddr *) &addr, sizeof(addr)) < 0) { ProbeTimeout = 0; break; } // non blocking if( ::fcntl( ProbeFD, F_SETFL, O_NONBLOCK ) < 0 ) { ProbeTimeout = 0; break; } // to this peer addr.l2_bdaddr = address().getBDAddr(); if( ::connect( ProbeFD, (struct sockaddr *) &addr, sizeof(addr)) < 0) { if( errno != EAGAIN && errno != EINPROGRESS ) { ProbeTimeout = 0; break; } // wait for connect to fail or succeed } } ProbePhase = 1; // wait for connect break; case 1 : { struct pollfd pf[1]; char buf[L2CAP_CMD_HDR_SIZE + PINGSIZE + 20]; int n; pf[0].fd = ProbeFD; pf[0].events = POLLOUT; if( (n = ::poll(pf, 1, 0)) < 0 ) { - owarn << address().toString() + odebug << address().toString() << " : errno " << errno << " " << strerror(errno)<<oendl; ProbeTimeout = 0; break; } if( ! n ) { // not ready -> try again break; } // send ping for( unsigned int i = L2CAP_CMD_HDR_SIZE; i < sizeof(buf); i++) buf[i] = (i % 40) + 'A'; l2cap_cmd_hdr *cmd = (l2cap_cmd_hdr *) buf; /* Build command header */ cmd->code = L2CAP_ECHO_REQ; cmd->ident = *(char *)this; // get some byte cmd->len = PINGSIZE; /* Send Echo Request */ if( ::send(ProbeFD, buf, PINGSIZE + L2CAP_CMD_HDR_SIZE, 0) <= 0) { if( errno == EACCES ) { // permission denied means that we could not // connect because the device does not allow us // but it is UP - owarn << address().toString() + odebug << address().toString() << " good send error " << errno << " " << strerror( errno) << oendl; State = OTPeer::Peer_Up; ProbeTimeout = 0; break; } else if( errno != EBUSY ) { - owarn << address().toString() + odebug << address().toString() << " : errno " << errno << " " << strerror(errno) << oendl; ProbeTimeout = 0; break; } // else want some more } ProbePhase = 2; // wait for ping reply } break; case 2 : // wait for reply { struct pollfd pf[1]; char buf[L2CAP_CMD_HDR_SIZE + PINGSIZE + 20]; l2cap_cmd_hdr *cmd = (l2cap_cmd_hdr *) buf; int n; pf[0].fd = ProbeFD; pf[0].events = POLLIN; if( (n = ::poll(pf, 1, 0)) < 0 ) { - owarn << address().toString() + odebug << address().toString() << " : errno " << errno << " " << strerror(errno) <<oendl; ProbeTimeout = 0; break; } if( ! n ) { // not ready -> try again break; } if( (n = ::recv( ProbeFD, buf, sizeof(buf), 0)) < 0) { - owarn << address().toString() + odebug << address().toString() << "errno " << errno << " " << strerror(errno) << oendl; ProbeTimeout = 0; break; } /* Check for our id */ if( cmd->ident != *(char *)this ) // not our reply break; - owarn << "reply from " + odebug << "reply from " << address().toString() << oendl; // whatever reply we get is a valid reply State = OTPeer::Peer_Up; ProbeTimeout = 0; } break; } if( State != OTPeer::Peer_Unknown ) { ProbeTimeout = 0; } } if( ProbeTimeout <= 0 ) { // regular timeout emit peerStateReport( this ); if( State == Peer_Unknown ) { State = Peer_Down; } if( ProbeFD >= 0 ) { // requested to stop by caller -> stop probing ::close( ProbeFD ); } // no more waiting killTimer( ev->timerId() ); } // else sleep some more } void OTPeer::stopFindingOutState( void ) { ProbeTimeout = PREMAGICNR; } diff --git a/noncore/settings/networksettings2/opietooth2/Opietooth.cpp b/noncore/settings/networksettings2/opietooth2/Opietooth.cpp index b14cc2f..8323549 100644 --- a/noncore/settings/networksettings2/opietooth2/Opietooth.cpp +++ b/noncore/settings/networksettings2/opietooth2/Opietooth.cpp @@ -284,884 +284,884 @@ OTPairing::OTPairing( QWidget * parent, OTIcons * _IC ) : i ++ ) { it = new LinkKeyLVI( i, Pairs_LV ); P = 0; D = OT->findDriver( Keys[i].from() ); if( D ) { it->setText( 0, D->devname() ); // we are source P = OT->findPeer( Keys[i].to() ); if( P ) { // put name it->setText( 1, P->name() ); } else { // unknown it->setText( 1, Keys[i].to().toString() ); } // and put address as sub QListViewItem * Sub = new QListViewItem( it ); Sub->setText( 0, D->address().toString() ); Sub->setText( 1, Keys[i].to().toString() ); } else { // perhaps we are destination D = OT->findDriver( Keys[i].to() ); if( D ) { it->setText( 1, D->devname() ); // we are source P = OT->findPeer( Keys[i].from() ); if( P ) { // put name it->setText( 0, P->name() ); } else { // unknown it->setText( 0, Keys[i].from().toString() ); } // and put address as sub QListViewItem * Sub = new QListViewItem( it ); Sub->setText( 0, Keys[i].from().toString() ); Sub->setText( 1, D->address().toString() ); } else { // nor source nor destination -> unknown it->setText( 0, Keys[i].from().toString() ); it->setText( 1, Keys[i].to().toString() ); } } } } OTPairing::~OTPairing() { if( MyIcons ) delete Icons; OTGateway::releaseOTGateway(); } void OTPairing::SLOT_Unpair( ) { // find selected pair QListViewItem * it = Pairs_LV->firstChild(); while( it ) { if( it->isSelected() ) { // confirm ? if( QMessageBox::warning(0, tr("Break pairing"), tr("Sure ?"), tr("Yes, break"), tr("No, don't break") ) == 0 ) { LinkKeyLVI * KPIt = (LinkKeyLVI *)it; // break OT->removeLinkKey( KPIt->index() ); delete KPIt; } return; } it= it->nextSibling(); } } // // // // // OTScan::OTScan( QWidget * parent, OTIcons * _IC ) : OTScanGUI( parent ), Filter() { OT = OTGateway::getOTGateway(); Icons = (_IC ) ? _IC : new OTIcons(); MyIcons = (_IC == 0 ); DetectedPeers_LV->header()->hide(); Current = 0; SelectedPeer = 0; SelectedChannel = 0; StrengthTimer = new QTimer( this ); connect( StrengthTimer, SIGNAL( timeout()), this, SLOT( SLOT_UpdateStrength()) ); connect( OT, SIGNAL( detectedPeer( OTPeer *, bool )), this, SLOT( SLOT_NewPeer( OTPeer *, bool )) ); connect( OT, SIGNAL( finishedDetecting()), this, SLOT( SLOT_FinishedDetecting()) ); // populate with peers we already know about const PeerVector & P = OT->peers(); for( unsigned int i = 0; i < P.count(); i ++ ) { SLOT_NewPeer( P[i], TRUE ); } // populate State fram { QHBoxLayout * H =new QHBoxLayout( State_Frm ); Paired_Led = new OLedBox( green, State_Frm ); QLabel * L1 = new QLabel( tr( "Paired" ), State_Frm ); H->addWidget( Paired_Led ); H->addWidget( L1 ); H->addStretch( 1 ); } } OTScan::~OTScan() { if( MyIcons ) delete Icons; OTGateway::releaseOTGateway(); // send all peers that we do not care about states QListViewItem * Lit = DetectedPeers_LV->firstChild(); while( Lit ) { ((PeerLVI *)Lit)->peer()->stopFindingOutState( ); Lit = Lit->nextSibling(); } } // static scan dialog function int OTScan::getDevice( OTPeer *& Peer, int & Channel, OTGateway * OT, const UUIDVector & Filter, QWidget* Parent ) { bool IsUp = 0; unsigned int i; // check if bluetooth is up OTDriverList & DL = OT->getDriverList(); for( i = 0; i < DL.count(); i ++ ) { if( DL[i]->isUp() ) { // one device that is up found IsUp = 1; break; } } // use this driver OT->setScanWith( OT->driver(i) ); // create dialog QDialog * Dlg = new QDialog( Parent, 0, TRUE ); QVBoxLayout * V = new QVBoxLayout( Dlg ); OTScan * Scn = new OTScan( Dlg ); connect( Scn, SIGNAL( selected() ), Dlg, SLOT( accept() ) ); if( Filter ) { Scn->setScanFilter( Filter ); } V->addWidget( Scn ); Dlg->setCaption( tr("Scan Neighbourhood" ) ); Dlg->showMaximized(); int rv = Dlg->exec(); if( rv == QDialog::Accepted ) { // get peer Peer = Scn->selectedPeer(); if( Peer == 0 ) { // no peer selected rv = QDialog::Rejected; } else { Channel = Scn->selectedChannel(); } } delete Dlg; return rv; } void OTScan::setScanFilter( const UUIDVector & V ) { Filter = V; } void OTScan::resetScanFilter( void ) { Filter.truncate(0); } void OTScan::SLOT_DoScan( bool DoIt ) { if( DoIt ) { OT->scanNeighbourhood(); } else { OT->stopScanOfNeighbourhood(); } scanMode( DoIt ); } // double clicked on a device void OTScan::SLOT_Selected( QListViewItem * it ) { if( ! it ) return; if( Filter.count() > 0 ) { // filter on service if( it->depth() == 0 ) { // select a service and not a device return; } // store result SelectedPeer = ((PeerLVI *)it->parent())->peer(); SelectedChannel = ((ChannelLVI *)it)->channel(); } else { // click on device if( it->depth() != 0 ) { return; } SelectedPeer = ((PeerLVI *)it)->peer(); SelectedChannel = 0; } - owarn << "Selected " << SelectedPeer->address().toString() << + odebug << "Selected " << SelectedPeer->address().toString() << " Channel " << SelectedChannel << oendl; emit selected(); } void OTScan::SLOT_FinishedDetecting( ) { scanMode( false ); } void OTScan::SLOT_CleanupOld( ) { // iterate over all peers and find those that // are down and have no pairing info OTPeer * TheP; const LinkKeyArray & Keys = OT->getLinkKeys(); QListViewItem * Lit = DetectedPeers_LV->firstChild(); while( Lit ) { TheP = ((PeerLVI *)Lit)->peer(); if( TheP->state() == OTPeer::Peer_Down ) { unsigned int k; // what about linkkeys ? for( k = 0; k < Keys.count(); k ++ ) { if( TheP->address() == Keys[k].to() || TheP->address() == Keys[k].from() ) { // part of linkkey - owarn << "LINKKEY " << TheP->address().toString() << oendl; + odebug << "LINKKEY " << TheP->address().toString() << oendl; break; } } if( k == Keys.count() ) { - owarn << "RM LINKKEY " << TheP->address().toString() << oendl; + odebug << "RM LINKKEY " << TheP->address().toString() << oendl; // not found -> remember to remove this peer QListViewItem * Nit; OT->removePeer( TheP ); Nit = Lit->nextSibling(); delete Lit; Lit = Nit; continue; } } else { - owarn << "NODOWN " << TheP->address().toString() << oendl; + odebug << "NODOWN " << TheP->address().toString() << oendl; } Lit = Lit->nextSibling(); } } void OTScan::SLOT_NewPeer( OTPeer * P, bool IsNew ){ PeerLVI * it = 0; if( IsNew ) { it = new PeerLVI( P, DetectedPeers_LV ); } else { // find peer in table QListViewItem * Lit = DetectedPeers_LV->firstChild(); while( Lit ) { if( ((PeerLVI *)Lit)->peer() == P ) { // this item it = (PeerLVI *)Lit; break; } Lit = Lit->nextSibling(); } if( ! it ) { - owarn << "Should not occur" << oendl; + odebug << "Should not occur" << oendl; return; } } // update/show info it->setText( 0, P->name() ); it->setPixmap(0, Icons->deviceIcon( OT->deviceTypeToName( P->deviceClass() ) ) ); // tell peer to report its state async connect( P, SIGNAL( peerStateReport( OTPeer *)), this, SLOT( SLOT_PeerState( OTPeer *)) ); if( IsNew ) { // find state refreshState( (PeerLVI *)it, 1 ); } else { // update staet SLOT_PeerState( P ); } } void OTScan::SLOT_PeerState( OTPeer * P ) { PeerLVI * it = (PeerLVI *)DetectedPeers_LV->firstChild(); while( it ) { if( it->peer() == P ) { break; } it = (PeerLVI * )it->nextSibling(); } if( ! it ) return; switch( P->state() ) { case OTPeer::Peer_Unknown : case OTPeer::Peer_Down : it->setPixmap( 1, 0 ); break; case OTPeer::Peer_Up : it->setPixmap( 1, Icons->loadPixmap( ( P->connectedTo() ) ? "connected" : "notconnected" ) ); if( it == Current && ! StrengthTimer->isActive() ) { // start showing strength StrengthTimer->start( 1000, FALSE ); SLOT_UpdateStrength(); } break; } } void OTScan::SLOT_RefreshState( void ) { QListViewItem * it = DetectedPeers_LV->firstChild(); while( it ) { if( it->isSelected() ) { break; } it = it->nextSibling(); } if( ! it ) return; refreshState( (PeerLVI *)it, 1 ); } void OTScan::refreshState( PeerLVI * it, bool Force ) { it->setPixmap( 1, Icons->loadPixmap( "find" ) ); it->peer()->findOutState( 30, Force ); } void OTScan::SLOT_Show( QListViewItem * it ) { if( ! it || it->depth() > 0 ) return; QString S; Current = (PeerLVI *)it; Strength_PB->setProgress( 0 ); // reset Address_LBL->setText( Current->peer()->address().toString() ); Peer_GB->setTitle( Current->peer()->name() ); const LinkKeyArray & Keys = OT->getLinkKeys(); Paired_Led->setOn( FALSE ); for( unsigned int i = 0; i < Keys.count(); i ++ ) { if( Current->peer()->address() == Keys[i].to() ) { Paired_Led->setOn( TRUE ); break; } } if( Current->peer()->state() == OTPeer::Peer_Up ) { RefreshServices_But->setEnabled( TRUE ); StrengthTimer->start( 1000, FALSE ); SLOT_UpdateStrength(); } else { RefreshServices_But->setEnabled( FALSE ); } } void OTScan::SLOT_UpdateStrength( void ) { OTDriver * D = Current->peer()->connectedTo(); if( D ) { long Q = D->getLinkQuality( Current->peer()->address() ); Strength_PB->setProgress( Q ); if( ! Q ) { // no quality Strength_PB->setEnabled( TRUE ); StrengthTimer->stop(); } } else { Strength_PB->setEnabled( FALSE ); Strength_PB->setProgress( 0 ); // no point in continuing StrengthTimer->stop(); } } void OTScan::SLOT_RefreshServices( void ) { QListViewItem * it = DetectedPeers_LV->firstChild(); while( it ) { if( it->isSelected() ) { break; } it = it->nextSibling(); } if( ! it ) return; QString S; PeerLVI * PI = (PeerLVI *)it; scanMode( true ); qApp->processEvents(0); ServiceVector & V = PI->peer()->services(); while( PI->firstChild() ) { // remove children delete PI->firstChild(); } for( unsigned int i = 0 ; i < V.count(); i ++ ) { QString S; S = V[i]->name(); if( S.isEmpty() ) { continue; } { QListViewItem * SIt; UUIDVector UIDV; QPixmap Pm; bool Done = 0; bool R; short ID; SIt = 0; UIDV = V[i]->classIDList(); // first all UUID ! 1200 12ff (Genericprofiles) for( unsigned int j = 0; j < UIDV.count(); j ++ ) { if( Filter.count() ) { bool FilterOut = 1; // filter out if not in list for( unsigned int ff = 0; ff < Filter.count(); ff ++ ) { if( UIDV[j] == Filter[ff] ) { FilterOut = 0; break; } } if( FilterOut ) { // not in filter list continue; } } // else show ID = UIDV[j].toShort(); if( ID < 0x1200 || ID > 0x12ff ) { // use this profile if( R ) { unsigned int ch; bool has; has = V[i]->rfcommChannel( ch ); SIt = new ChannelLVI( (has) ? (int)ch : -1 , PI ); SIt->setText(0, V[i]->name() ); Pm = Icons->serviceIcon( ID, R ); SIt->setPixmap(0, Pm ); Done = 1; break; } } } if( ! Done ) { // check other range too for( unsigned int j = 0; j < UIDV.count(); j ++ ) { if( Filter.count() ) { bool FilterOut = 1; // filter out if not in list for( unsigned int ff = 0; ff < Filter.count(); ff ++ ) { if( UIDV[j] == Filter[ff] ) { FilterOut = 0; break; } } if( FilterOut ) { // not in filter list continue; } } // else show ID = UIDV[j].toShort(); if( ID >= 0x1200 && ID <= 0x12ff ) { // use this profile unsigned int ch; bool has; has = V[i]->rfcommChannel( ch ); SIt = new ChannelLVI( (has) ? (int)ch : -1 , PI ); SIt->setText(0, V[i]->name() ); Pm = Icons->serviceIcon( ID, R ); SIt->setPixmap(0, Pm ); break; } } } } } scanMode( false ); } void OTScan::scanMode( bool M ) { // avoid infinite loop because it triggers DoScan Detect_But->blockSignals( TRUE ); Detect_But->setOn( M ); Detect_But->setText( (M) ? tr("Scanning") : tr("Scan") ); Detect_But->blockSignals( FALSE ); } // // // // // OTManage::OTManage( QWidget * parent, OTIcons * _IC ) : OTManageGUI( parent ) { OT = OTGateway::getOTGateway(); Icons = (_IC ) ? _IC : new OTIcons(); MyIcons = (_IC == 0 ); AllDrivers_LV->setSorting(-1); connect( OT, SIGNAL( driverListChanged() ), this, SLOT( SLOT_DriverListChanged() ) ); connect( OT, SIGNAL( stateChange( OTDriver *, bool ) ), this, SLOT( SLOT_StateChange( OTDriver *, bool ) ) ); SLOT_DriverListChanged(); AllDrivers_LV->header()->hide(); } OTManage::~OTManage() { if( MyIcons ) delete Icons; OTGateway::releaseOTGateway(); } void OTManage::SLOT_ShowDriver( QListViewItem * It ) { if( It == 0 || It->depth() > 0 ) // not toplevel return; DriverLVI * it = (DriverLVI *) It; DriverIsUp_CB->setChecked( it->driver()->isUp() ); } void OTManage::SLOT_UpDriver( bool Up ) { QListViewItem * it = AllDrivers_LV->firstChild(); while( it ) { if( it->isSelected() ) { OTDriver * D = ((DriverLVI *)it)->driver(); - owarn << "UP driver " << D->devname() << oendl; + odebug << "UP driver " << D->devname() << oendl; // this D->setUp( Up ); return; } it = it->nextSibling(); } } void OTManage::SLOT_StateChange( OTDriver * D, bool Up ) { QListViewItem * it = AllDrivers_LV->firstChild(); while( it ) { if( ((DriverLVI *)it)->driver() == D ) { it->setPixmap( 0, Icons->loadPixmap( ( Up ) ? "bluezon" : "bluezoff" ) ); return; } it = it->nextSibling(); } } void OTManage::SLOT_DriverListChanged( ) { DriverLVI * It; QListViewItem * Sub; QListViewItem * First = 0; OTDriver* D; OTDriverList & DL = OT->getDriverList(); AllDrivers_LV->clear(); for( unsigned int i = 0; i < DL.count(); i ++ ) { D = DL[i]; It = new DriverLVI( D, AllDrivers_LV ); if( ! First ) First = It; It->setText( 0, D->devname() ); It->setPixmap( 0, Icons->loadPixmap( (D->isUp()) ? "bluezon" : "bluezoff" ) ); Sub = new QListViewItem( It ); Sub->setText( 0, tr( "Name" ) ); Sub->setText( 1, D->name() ); Sub = new QListViewItem( It ); Sub->setText( 0, tr( "Address" ) ); Sub->setText( 1, D->address().toString() ); Sub = new QListViewItem( It ); Sub->setText( 0, tr( "Revision" ) ); Sub->setText( 1, D->revision() ); Sub = new QListViewItem( It ); Sub->setText( 0, tr( "Manufacturer" ) ); Sub->setText( 1, D->manufacturer() ); QString Service, Device; D->getClass( Service, Device ); Sub = new QListViewItem( It ); Sub->setText( 0, tr( "Service classes" ) ); Sub->setText( 1, Service ); Sub = new QListViewItem( It ); Sub->setText( 0, tr( "Device class" ) ); Sub->setText( 1, Device ); } if( DL.count() ) { AllDrivers_LV->setCurrentItem( First ); DriverIsUp_CB->setEnabled( TRUE ); } else { DriverIsUp_CB->setChecked( FALSE ); DriverIsUp_CB->setEnabled( FALSE ); } } void OTManage::SLOT_SetRefreshTimer( int v ) { OT->setRefreshTimer( v * 1000 ); } // // // // // OTMain::OTMain( QWidget * parent ) : OTMainGUI( parent ) { Icons = new OTIcons(); SnifWindow = 0; OT = OTGateway::getOTGateway(); connect( OT, SIGNAL( deviceEnabled( bool ) ), this, SLOT( SLOT_DeviceIsEnabled( bool ) ) ); connect( OT, SIGNAL( driverListChanged() ), this, SLOT( SLOT_DriverListChanged() ) ); connect( OT, SIGNAL( stateChange( OTDriver *, bool ) ), this, SLOT( SLOT_StateChange( OTDriver *, bool ) ) ); if( ! OT->needsEnabling() ) { MustBeEnabled_CB->hide(); } else { // detect current state MustBeEnabled_CB->setChecked( OT->isEnabled() ); } SLOT_DriverListChanged(); } OTMain::~OTMain() { OTGateway::releaseOTGateway(); delete Icons; } void OTMain::SLOT_DriverListChanged() { OTDriver * D; OTDriverList & DL = OT->getDriverList(); DeviceList_CB->clear(); for( unsigned int i = 0; i < DL.count(); i ++ ) { D = DL[i]; DeviceList_CB->insertItem( Icons->loadPixmap( (D->isUp()) ? "bluezon" : "bluezoff" ), D->devname() ); if( D == OT->scanWith() ) { DeviceList_CB->setCurrentItem( i ); } } Scan_But->setEnabled( OT->getDriverList().count() > 0 ); DeviceList_CB->setEnabled( OT->getDriverList().count() > 0 ); } void OTMain::SLOT_EnableBluetooth( bool Up ) { OT->SLOT_SetEnabled( Up ); } void OTMain::SLOT_DeviceIsEnabled( bool Up ) { MustBeEnabled_CB->blockSignals( TRUE ); MustBeEnabled_CB->setChecked( Up ); MustBeEnabled_CB->blockSignals( FALSE ); } void OTMain::SLOT_Manage( void ) { QDialog * Dlg = new QDialog( this, 0, TRUE ); QVBoxLayout * V = new QVBoxLayout( Dlg ); OTManage * Mng = new OTManage( Dlg, Icons ); V->addWidget( Mng ); Dlg->setCaption( tr("Manage local devices" ) ); Dlg->showMaximized(); Dlg->exec(); delete Dlg; } void OTMain::SLOT_Scan( void ) { OTDriverList & DL = OT->getDriverList(); for( unsigned int i = 0; i < DL.count(); i ++ ) { if( DL[i]->isUp() && DL[i]->devname() == DeviceList_CB->currentText() ) { QDialog * Dlg = new QDialog( this, 0, TRUE ); QVBoxLayout * V = new QVBoxLayout( Dlg ); OTScan * Scn = new OTScan( Dlg, Icons ); OT->setScanWith( OT->driver(i) ); V->addWidget( Scn ); Dlg->setCaption( tr("Scan Neighbourhood" ) ); Dlg->showMaximized(); Dlg->exec(); delete Dlg; return; } } } void OTMain::SLOT_StateChange( OTDriver * D, bool Up ) { for( int i = 0; i < DeviceList_CB->count(); i ++ ) { if( DeviceList_CB->text(i) == D->devname() ) { DeviceList_CB->changeItem( Icons->loadPixmap( (Up) ? "bluezon" : "bluezoff" ), D->devname(), i ); return; } } } void OTMain::SLOT_Pairing( void ) { QDialog * Dlg = new QDialog( this, 0, TRUE ); QVBoxLayout * V = new QVBoxLayout( Dlg ); OTPairing * Pair = new OTPairing( Dlg, Icons ); V->addWidget( Pair ); Dlg->showMaximized(); Dlg->setCaption( tr("Manage pairing" ) ); Dlg->exec(); delete Dlg; } void OTMain::SLOT_Sniffing( void ) { if( SnifWindow == 0 ) { SnifWindow = new QDialog( this, 0, FALSE ); QVBoxLayout * V = new QVBoxLayout( SnifWindow ); OTSniffing * SN = new OTSniffing( SnifWindow ); V->addWidget( SN ); } SnifWindow->showMaximized(); SnifWindow->show(); } diff --git a/noncore/settings/networksettings2/opietooth2/config.in b/noncore/settings/networksettings2/opietooth2/config.in index 720f49a..084e8c0 100644 --- a/noncore/settings/networksettings2/opietooth2/config.in +++ b/noncore/settings/networksettings2/opietooth2/config.in @@ -1,5 +1,5 @@ config NS2OPIETOOTH - boolean "opie-networksettings2 bluetooth library" + boolean "Opietooth2 bluetooth library" default "y" - depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE + depends ( LIBQPE || LIBQPE-X11 ) && LIBOPIE2CORE && LIBBLUEZ_DEP && NS2CORE diff --git a/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst b/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst index cd605c2..2713c61 100755 --- a/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst +++ b/noncore/settings/networksettings2/opietooth2/libopietooth2.postinst @@ -1,10 +1,10 @@ #!/bin/sh QTPB=/opt/QtPalmtop/bin [ ! -L ${QTPB}/networksettings2-opietooth ] && ln -sf ${QTPB}/networksettings2 ${QTPB}/networksettings2-opietooth # qcop QPE/Taskbar "linkChanged(opietooth)" -qcop QPE/Taskbar "reloadApps()" +${QTPB}/qcop QPE/Taskbar "reloadApps()" exit 0 diff --git a/noncore/settings/networksettings2/opietooth2/opietooth2.pro b/noncore/settings/networksettings2/opietooth2/opietooth2.pro index e0057a9..16277cf 100644 --- a/noncore/settings/networksettings2/opietooth2/opietooth2.pro +++ b/noncore/settings/networksettings2/opietooth2/opietooth2.pro @@ -1,37 +1,44 @@ TEMPLATE = lib CONFIG += qt warn_on release #CONFIG += qt warn_on debug DESTDIR = $(OPIEDIR)/lib$(PROJMAK) HEADERS = OTDevice.h \ OTDriver.h \ OTGateway.h \ OTHCISocket.h \ OTInquiry.h \ OTDeviceAddress.h \ OTIcons.h \ OTUUID.h \ OTSDPAttribute.h \ OTSDPService.h \ OTPeer.h \ Opietooth.h SOURCES = OTDevice.cpp \ OTDriver.cpp \ OTDriverList.cpp \ OTHCISocket.cpp \ OTInquiry.cpp \ OTDeviceAddress.cpp \ OTUUID.cpp \ OTSDPAttribute.cpp \ OTSDPService.cpp \ OTIcons.cpp \ OTPeer.cpp \ OTGateway.cpp \ Opietooth.cpp INCLUDEPATH += $(OPIEDIR)/include ../networksettings2 DEPENDPATH += $(OPIEDIR)/include LIBS += -lqpe -lopiecore2 -lbluetooth -lnetworksettings2 INTERFACES = OTMainGUI.ui OTSniffGUI.ui OTScanGUI.ui OTManageGUI.ui OTPairingGUI.ui TARGET = opietooth2 VERSION = 1.0.0 include ( $(OPIEDIR)/include.pro ) + +!isEmpty( LIBBLUEZ_INC_DIR ) { + INCLUDEPATH += $$LIBBLUEZ_INC_DIR +} +!isEmpty( LIBBLUEZ_LIB_DIR ) { + LIBS += -L$$LIBBLUEZ_LIB_DIR +} diff --git a/noncore/settings/networksettings2/profile/profilerun.cpp b/noncore/settings/networksettings2/profile/profilerun.cpp index ab57a00..acb67bd 100644 --- a/noncore/settings/networksettings2/profile/profilerun.cpp +++ b/noncore/settings/networksettings2/profile/profilerun.cpp @@ -1,27 +1,27 @@ #include <resources.h> #include "profilerun.h" State_t ProfileRun::detectState( void ) { if( Data->Disabled ) { return Disabled; } return Unknown; } QString ProfileRun::setMyState( NodeCollection * NC, Action_t A, bool ) { - owarn << "Profile " << Data->Disabled << oendl; + odebug << "Profile " << Data->Disabled << oendl; if( A == Disable ) { if( ! Data->Disabled ) { Data->Disabled = 1; NC->setModified( 1 ); } } else if( A == Enable ) { if( Data->Disabled ) { Data->Disabled = 0; NC->setModified( 1 ); } } return QString(); } diff --git a/noncore/settings/networksettings2/usb/usbrun.cpp b/noncore/settings/networksettings2/usb/usbrun.cpp index eb439c1..de8c8a2 100644 --- a/noncore/settings/networksettings2/usb/usbrun.cpp +++ b/noncore/settings/networksettings2/usb/usbrun.cpp @@ -1,119 +1,120 @@ #include <qfile.h> #include <qfileinfo.h> #include <qtextstream.h> #include <resources.h> #include "usbrun.h" State_t USBRun::detectState( void ) { // unavailable : no card found // available : card found and assigned to us or free // up : card found and assigned to us and up NodeCollection * NC = nodeCollection(); QString S = QString( "/tmp/profile-%1.up" ).arg(NC->number()); System & Sys = NSResources->system(); InterfaceInfo * Run; QFile F( S ); Log(("Detecting for %s\n", NC->name().latin1() )); if( F.open( IO_ReadOnly ) ) { // could open file -> read interface and assign QString X; QTextStream TS(&F); X = TS.readLine(); Log(("%s exists\n", S.latin1() )); // find interface if( handlesInterface( X ) ) { for( QDictIterator<InterfaceInfo> It(Sys.interfaces()); It.current(); ++It ) { Run = It.current(); if( X == Run->Name ) { NC->assignInterface( Run ); return IsUp; } } } } Log(("Assigned %p\n", NC->assignedInterface() )); + if( ( Run = NC->assignedInterface() ) ) { // we already have an interface assigned -> still present ? if( ! Run->IsUp ) { // usb is still free -> keep assignment return Available; } // else interface is up but NOT us -> some other profile } // nothing (valid) assigned to us NC->assignInterface( 0 ); // find possible interface - for( QDictIterator<InterfaceInfo> It(Sys.interfaces()); - It.current(); - ++It ) { - Run = It.current(); - - Log(("%s %d %d=%d %d\n", - Run->Name.latin1(), - handlesInterface( Run->Name ), - Run->CardType, ARPHRD_ETHER, - ! Run->IsUp )); - - if( handlesInterface( Run->Name ) && - Run->CardType == ARPHRD_ETHER && - ! Run->IsUp - ) { - // proper type, and Not UP -> free - // usb cables are currently always available when requested - // until we can detect if we are plugged in - return Available; - } + if( getInterface() ) { + // proper type, and Not UP -> free + // usb cables are currently always available when requested + // until we can detect if we are plugged in + return Available; } return Unavailable; } QString USBRun::setMyState( NodeCollection * NC, Action_t A, bool ) { - // nothing needs to be done to 'activate' or 'deactivate' - // a cable + InterfaceInfo * I = getInterface(); + + if( ! I ) { + return QString("No usb device available"); + } + + Log(( "Grabbed USB interface %s\n", I->Name.latin1() )); + // grab this interface + NC->assignInterface( I ); + return QString(); } // get interface that is free or assigned to us InterfaceInfo * USBRun::getInterface( void ) { System & S = NSResources->system(); InterfaceInfo * best = 0, * Run; - QRegExp R( "usb[0-9abcdef]" ); for( QDictIterator<InterfaceInfo> It(S.interfaces()); It.current(); ++It ) { Run = It.current(); + + Log(("%s %d %d=%d %d\n", + Run->Name.latin1(), + handlesInterface( Run->Name ), + Run->CardType, ARPHRD_ETHER, + ! Run->IsUp )); + if( handlesInterface( Run->Name ) && Run->CardType == ARPHRD_ETHER ) { // this is a USB card if( Run->assignedConnection() == netNode()->connection() ) { // assigned to us return Run; - } else if( Run->assignedConnection() == 0 ) { + } else if( ! Run->IsUp && + Run->assignedConnection() == 0 ) { // free best = Run; - } + } // UP or not assigned to us } } return best; // can be 0 } bool USBRun::handlesInterface( const QString & S ) { return Pat.match( S ) >= 0; } bool USBRun::handlesInterface( InterfaceInfo * I ) { return handlesInterface( I->Name ); } |