6 files changed, 45 insertions, 44 deletions

diff --git a/noncore/settings/networksettings/ppp/connect.cpp b/noncore/settings/networksettings/ppp/connect.cpp
index 128877a..8981e01 100644
--- a/noncore/settings/networksettings/ppp/connect.cpp
+++ b/noncore/settings/networksettings/ppp/connect.cpp
@@ -1186,66 +1186,66 @@ bool ConnectWidget::execppp() {
   command = "pppd";
 
   // as of version 2.3.6 pppd falls back to the real user rights when
   // opening a device given in a command line. To avoid permission conflicts
   // we'll simply leave this argument away. pppd will then use the default tty
   // which is the serial port we connected stdin/stdout to in opener.cpp.
   //  command += " ";
   //  command += _ifaceppp->data()->modemDevice();
 
   command += " " + _ifaceppp->data()->speed();
 
   command += " -detach";
 
   if(_ifaceppp->data()->ipaddr() != "0.0.0.0" ||
      _ifaceppp->data()->gateway() != "0.0.0.0") {
     if(_ifaceppp->data()->ipaddr() != "0.0.0.0") {
       command += " ";
       command += _ifaceppp->data()->ipaddr();
       command +=  ":";
     }
     else {
       command += " ";
       command += ":";
     }
 
     if(_ifaceppp->data()->gateway() != "0.0.0.0")
       command += _ifaceppp->data()->gateway();
   }
 
   if(_ifaceppp->data()->subnetmask() != "0.0.0.0")
     command += " netmask " + _ifaceppp->data()->subnetmask();
 
-  if(_ifaceppp->data()->flowcontrol() != "None") {
-    if(_ifaceppp->data()->flowcontrol() == "CRTSCTS")
+  if(_ifaceppp->data()->flowcontrol() != PPPData::FlowNone) {
+      if(_ifaceppp->data()->flowcontrol() == PPPData::FlowHardware)
       command += " crtscts";
     else
       command += " xonxoff";
   }
 
   if(_ifaceppp->data()->defaultroute())
     command += " defaultroute";
 
   if(_ifaceppp->data()->autoDNS())
     command += " usepeerdns";
 
 
   // PAP settings
   if(_ifaceppp->data()->authMethod() == AUTH_PAP) {
     command += " -chap user ";
     command = command + _ifaceppp->data()->storedUsername();
   }
 
   // CHAP settings
   if(_ifaceppp->data()->authMethod() == AUTH_CHAP) {
     command += " -pap user ";
     command = command  + _ifaceppp->data()->storedUsername();
   }
 
   // PAP/CHAP settings
   if(_ifaceppp->data()->authMethod() == AUTH_PAPCHAP) {
       QString tmpName = _ifaceppp->data()->storedUsername();
       if ( !tmpName.isEmpty() )  {
           command += " user ";
           command = command + tmpName;
       }
   }
diff --git a/noncore/settings/networksettings/ppp/general.cpp b/noncore/settings/networksettings/ppp/general.cpp
index 5e2a04f..9457173 100644
--- a/noncore/settings/networksettings/ppp/general.cpp
+++ b/noncore/settings/networksettings/ppp/general.cpp
@@ -163,130 +163,114 @@ ModemWidget::ModemWidget( PPPData *pd, QWidget *parent, const char *name )
             "115200",
 #endif
 
 #ifdef B57600
             "57600",
 #endif
 
             "38400",
             "19200",
             "9600",
             "2400",
             0
         };
 
     for(k = 0; baudrates[k]; k++)
         baud_c->insertItem(baudrates[k]);
 
     baud_c->setCurrentItem(3);
     //   connect(baud_c, SIGNAL(activated(int)),
             //   this, SLOT(speed_selection(int)));
     tl->addWidget(baud_c, 4, 1);
 
     tmp = tr("Specifies the speed your modem and the serial\n"
              "port talk to each other. You should begin with\n"
              "the default of 38400 bits/sec. If everything\n"
              "works you can try to increase this value, but to\n"
              "no more than 115200 bits/sec (unless you know\n"
              "that your serial port supports higher speeds).");
 
     QWhatsThis::add(baud_label,tmp);
     QWhatsThis::add(baud_c,tmp);
 
-    for(int i=0; i <= enter->count()-1; i++)
-    {
-        if(_pppdata->enter() == enter->text(i))
-            enter->setCurrentItem(i);
-    }
-
     tl->addRowSpacing(5, 10);
 
     //Modem Lock File
     modemlockfile = new QCheckBox(tr("&Use lock file"), this);
-
     modemlockfile->setChecked(_pppdata->modemLockFile());
     //   connect(modemlockfile, SIGNAL(toggled(bool)),
     //           SLOT(modemlockfilechanged(bool)));
     tl->addMultiCellWidget(modemlockfile, 6, 6, 0, 1);
     //  l12->addStretch(1);
     QWhatsThis::add(modemlockfile,
                         tr("<p>To prevent other programs from accessing the\n"
                            "modem while a connection is established, a\n"
                            "file can be created to indicate that the modem\n"
                            "is in use. On Linux an example file would be\n"
                            "<tt>/var/lock/LCK..ttyS1</tt>\n"
                            "Here you can select whether this locking will\n"
                            "be done.\n"
                            "\n"
                            "<b>Default</b>: On"));
 
     // Modem Timeout Line Edit Box
     QHBoxLayout *timeoutLayout = new QHBoxLayout( this );
     QLabel *timeoutlabel = new QLabel( tr("Modem timeout:") ,this, "timeout" );
     modemtimeout = new QSpinBox( 1, 120, 1, this, "modemTimeout" );
     //   modemtimeout = new KIntNumInput(_pppdata->modemTimeout(), this);
     //   modemtimeout->setLabel(tr("Modem &timeout:"));
     //  modemtimeout->setRange(1, 120, 1);
     modemtimeout->setSuffix(tr(" sec"));
     modemtimeout->setValue( _pppdata->modemTimeout() );
     //   connect(modemtimeout, SIGNAL(valueChanged(int)),
             //   SLOT(modemtimeoutchanged(int)));
     timeoutLayout->addWidget(timeoutlabel);
     timeoutLayout->addWidget(modemtimeout);
     tl->addMultiCellLayout(timeoutLayout, 7, 7, 0, 1);
 
     QWhatsThis::add(modemtimeout,
                         tr("This specifies how long <i>kppp</i> waits for a\n"
                            "<i>CONNECT</i> response from your modem. The\n"
                            "recommended value is 30 seconds."));
 
     //set stuff from gpppdata
-    for(int i=0; i <= enter->count()-1; i++)
-    {
-        if(_pppdata->enter() == enter->text(i))
-            enter->setCurrentItem(i);
-    }
+    enter->setCurrentItem( static_cast<int>(_pppdata->enter()) );
+    flowcontrol->setCurrentItem( static_cast<int>( _pppdata->flowcontrol() ) );
 
     for(int i=0; i <= modemdevice->count()-1; i++)
     {
         if(_pppdata->modemDevice() == modemdevice->text(i))
             modemdevice->setCurrentItem(i);
     }
 
-    for(int i=0; i <= flowcontrol->count()-1; i++)
-    {
-        if(_pppdata->flowcontrol() == flowcontrol->text(i))
-            flowcontrol->setCurrentItem(i);
-    }
-
     //set the modem speed
     for(int i=0; i < baud_c->count(); i++)
         if(baud_c->text(i) == _pppdata->speed())
             baud_c->setCurrentItem(i);
 
     tl->setRowStretch(1, 1);
 }
 
 ModemWidget::~ModemWidget()
 {
     QStringList devs;
 
     for (int i=0;i<modemdevice->count();i++)
     {
         QString s = modemdevice->text(i);
         s.simplifyWhiteSpace();
         if (! s.isEmpty() ) devs << s;
     }
 
 
     QString edited = modemdevice->currentText();
     if ( !( edited ).isEmpty() )
     {
         edited.simplifyWhiteSpace();
         if ( devs.contains( edited ) == 0 )
         {
             devs << edited;
         }
     }
 
 
     Config cfg("NetworkSetupPPP");
@@ -309,95 +293,97 @@ ModemWidget::~ModemWidget()
 //   _pppdata->setModemDevice(modemdevice->text(i));
 // }
 
 // void ModemWidget::setmodemdc( const QString &string )  {
 //     _pppdata->setModemDevice( string );
 // }
 
 // void ModemWidget::setflowcontrol(int i) {
 //   _pppdata->setFlowcontrol(flowcontrol->text(i));
 // }
 
 
 // void ModemWidget::modemlockfilechanged(bool set) {
 //   _pppdata->setModemLockFile(set);
 // }
 
 
 // void ModemWidget::modemtimeoutchanged(int n) {
 //   _pppdata->setModemTimeout(n);
 // }
 
 
 
 bool ModemWidget::save()
 {
     //first check to make sure that the device name is unique!
     if(modemname->text().isEmpty() ||
             !_pppdata->isUniqueDevname(modemname->text()))
         return false;
 
     _pppdata->setDevname( modemname->text() );
     _pppdata->setModemDevice( modemdevice->currentText() );
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
+    _pppdata->setFlowcontrol(static_cast<PPPData::FlowControl>(flowcontrol->currentItem()));
+    _pppdata->setEnter( static_cast<PPPData::LineTermination>(enter->currentItem()));
     _pppdata->setSpeed(baud_c->currentText());
     _pppdata->setModemLockFile( modemlockfile->isChecked());
     _pppdata->setModemTimeout( modemtimeout->value() );
     return true;
 
 }
 
 void ModemWidget::slotBeforeModemQuery()
 {
     m_oldModemDev     = _pppdata->modemDevice();
-    m_oldFlowControl  = _pppdata->flowcontrol();
+    m_oldFlowControl  = static_cast<int>( _pppdata->flowcontrol() );
     m_oldSpeed        = _pppdata->speed();
     m_oldModemLock    = _pppdata->modemLockFile();
     m_oldModemTimeout = _pppdata->modemTimeout();
+    m_oldLineEnd      = static_cast<int>( _pppdata->enter() );
 
 
     _pppdata->setModemDevice( modemdevice->currentText() );
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
+    _pppdata->setFlowcontrol(static_cast<PPPData::FlowControl>(flowcontrol->currentItem()));
+    _pppdata->setEnter(static_cast<PPPData::LineTermination>(enter->currentItem()));
     _pppdata->setSpeed(baud_c->currentText());
     _pppdata->setModemLockFile( modemlockfile->isChecked());
     _pppdata->setModemTimeout( modemtimeout->value() );
 }
 
 
 void ModemWidget::slotAfterModemQuery()
 {
     _pppdata->setModemDevice( m_oldModemDev );
-    _pppdata->setFlowcontrol( m_oldFlowControl );
+    _pppdata->setFlowcontrol( static_cast<PPPData::FlowControl>(m_oldFlowControl) );
+    _pppdata->setEnter( static_cast<PPPData::LineTermination>(m_oldLineEnd) );
     _pppdata->setSpeed( m_oldSpeed );
     _pppdata->setModemLockFile( m_oldModemLock );
     _pppdata->setModemTimeout( m_oldModemTimeout );
 }
 
 
 ModemWidget2::ModemWidget2( PPPData *pd, InterfacePPP *ip, QWidget *parent,
                             const char *name)
         : QWidget(parent, name), _pppdata(pd), _ifaceppp(ip)
 {
     QVBoxLayout *l1 = new QVBoxLayout(this, 0 );//, KDialog::spacingHint());
 
 
     waitfordt = new QCheckBox(tr("&Wait for dial tone before dialing"), this);
     waitfordt->setChecked(_pppdata->waitForDialTone());
     //  connect(waitfordt, SIGNAL(toggled(bool)), SLOT(waitfordtchanged(bool)));
     l1->addWidget(waitfordt);
     QWhatsThis::add(waitfordt,
                         tr("<p>Normally the modem waits for a dial tone\n"
                            "from your phone line, indicating that it can\n"
                            "start to dial a number. If your modem does not\n"
                            "recognize this sound, or your local phone system\n"
                            "does not emit such a tone, uncheck this option\n"
                            "\n"
                            "<b>Default:</b>: On"));
 
     QHBoxLayout *waitLayout = new QHBoxLayout( this );
     QLabel *waitLabel = new QLabel( tr("Busy wait:"), this, "busyWait" );
     busywait = new QSpinBox( 0, 300, 5, this, "busyWait" );
     //   busywait = new KIntNumInput(_pppdata->busyWait(), this);
     //   busywait->setLabel(tr("B&usy wait:"));
     //   busywait->setRange(0, 300, 5, true);
diff --git a/noncore/settings/networksettings/ppp/general.h b/noncore/settings/networksettings/ppp/general.h
index a4dece4..0bb3136 100644
--- a/noncore/settings/networksettings/ppp/general.h
+++ b/noncore/settings/networksettings/ppp/general.h
@@ -52,67 +52,67 @@ private slots:
      * will use 'current' settings
      */
     void slotBeforeModemQuery();
     void slotAfterModemQuery();
 
 /* private slots: */
         /*   void setmodemdc(int); */
 /*   void  setmodemdc(const QString &); */
         /*   void setflowcontrol(int); */
         /*   void modemtimeoutchanged(int); */
         /*   void modemlockfilechanged(bool); */
         /*   void setenter(int); */
 /*   void  speed_selection(int); */
 
 private:
           QComboBox *enter;
         /*   QLabel *label1; */
         /*   QLabel *label2; */
         /*   QLabel *labeltmp; */
         /*   QLabel *labelenter; */
   QLineEdit     *modemname;
           QComboBox *modemdevice;
           QComboBox *flowcontrol;
 
   QComboBox *baud_c;
   QLabel *baud_label;
 
           QSpinBox *modemtimeout;
   QCheckBox     *modemlockfile;
   PPPData *_pppdata;
 
 private:
-    QString m_oldModemDev, m_oldFlowControl, m_oldSpeed;
+    QString m_oldModemDev, m_oldSpeed;
     bool m_oldModemLock;
-    int m_oldModemTimeout;
+    int m_oldModemTimeout, m_oldFlowControl, m_oldLineEnd;
 };
 
 
 class ModemWidget2 : public QWidget {
   Q_OBJECT
 public:
   ModemWidget2( PPPData*, InterfacePPP*, QWidget *parent=0, const char *name=0 );
   bool save();
 
 signals:
     void sig_beforeQueryModem();
     void sig_afterQueryModem();
 
 private slots:
 /*   void  waitfordtchanged(bool); */
         /*   void busywaitchanged(int); */
         //  void use_cdline_toggled(bool);
           void modemcmdsbutton();
           //  void terminal();
           void query_modem();
   //  void  volumeChanged(int);
 
 private:
           QLabel *labeltmp;
           QPushButton *modemcmds;
           QPushButton *modeminfo_button;
           //  QPushButton *terminal_button;
           //  QFrame *fline;
   QCheckBox     *waitfordt;
           QSpinBox *busywait;
           QCheckBox *chkbox1;
   QSlider       *volume;
diff --git a/noncore/settings/networksettings/ppp/modem.cpp b/noncore/settings/networksettings/ppp/modem.cpp
index 79f015b..7b2e2a3 100644
--- a/noncore/settings/networksettings/ppp/modem.cpp
+++ b/noncore/settings/networksettings/ppp/modem.cpp
@@ -196,66 +196,66 @@ bool Modem::opentty() {
   tcdrain (modemfd);
   tcflush (modemfd, TCIOFLUSH);
 
   if(tcgetattr(modemfd, &tty) < 0){
     // this helps in some cases
     tcsendbreak(modemfd, 0);
     sleep(1);
     if(tcgetattr(modemfd, &tty) < 0){
       errmsg = QObject::tr("The modem is busy.");
       ::close(modemfd);
       modemfd = -1;
       return false;
     }
   }
 
   memset(&initial_tty,'\0',sizeof(initial_tty));
 
   initial_tty = tty;
 
   tty.c_cc[VMIN] = 0; // nonblocking
   tty.c_cc[VTIME] = 0;
   tty.c_oflag = 0;
   tty.c_lflag = 0;
 
   tty.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
   tty.c_cflag |= CS8 | CREAD;
   tty.c_cflag |= CLOCAL;                   // ignore modem status lines
   tty.c_iflag = IGNBRK | IGNPAR /* | ISTRIP */ ;
   tty.c_lflag &= ~ICANON;                  // non-canonical mode
   tty.c_lflag &= ~(ECHO|ECHOE|ECHOK|ECHOKE);
 
 
-  if(_pppdata->flowcontrol() != "None") {
-      if(_pppdata->flowcontrol() == "CRTSCTS") {
+  if(_pppdata->flowcontrol() != PPPData::FlowNone) {
+      if(_pppdata->flowcontrol() == PPPData::FlowHardware) {
       tty.c_cflag |= CRTSCTS;
     }
     else {
       tty.c_iflag |= IXON | IXOFF;
       tty.c_cc[VSTOP]  = 0x13; /* DC3 = XOFF = ^S */
       tty.c_cc[VSTART] = 0x11; /* DC1 = XON  = ^Q */
     }
   }
   else {
     tty.c_cflag &= ~CRTSCTS;
     tty.c_iflag &= ~(IXON | IXOFF);
   }
 
   cfsetospeed(&tty, modemspeed());
   cfsetispeed(&tty, modemspeed());
 
   tcdrain(modemfd);
 
   if(tcsetattr(modemfd, TCSANOW, &tty) < 0){
     errmsg = QObject::tr("The modem is busy.");
     ::close(modemfd);
     modemfd=-1;
     return false;
   }
 
   errmsg = QObject::tr("Modem Ready.");
   return true;
 }
 
 
 bool Modem::closetty() {
   if(modemfd >=0 ) {
@@ -326,73 +326,77 @@ void Modem::stopNotifier() {
     delete sn;
     sn = 0;
     odebug << "QSocketNotifier stopped!" << oendl;
   }
 }
 
 
 void Modem::flush() {
   char c;
   while(read(modemfd, &c, 1) == 1);
 }
 
 
 bool Modem::writeChar(unsigned char c) {
   int s;
   do {
     s = write(modemfd, &c, 1);
     if (s < 0) {
       oerr << "write() in Modem::writeChar failed" << oendl;
       return false;
     }
   } while(s == 0);
 
   return true;
 }
 
 
 bool Modem::writeLine(const char *buf) {
   int len = strlen(buf);
   char *b = new char[len+2];
   memcpy(b, buf, len);
   // different modems seem to need different line terminations
-  QString term = _pppdata->enter();
-  if(term == "LF")
+  switch( _pppdata->enter() ) {
+  case PPPData::EndLF:
     b[len++]='\n';
-  else if(term == "CR")
+    break;
+  case PPPData::EndCR:
     b[len++]='\r';
-  else if(term == "CR/LF") {
+    break;
+  case PPPData::EndCRLF:
     b[len++]='\r';
     b[len++]='\n';
+    break;
   }
+
   int l = len;
   while(l) {
     int wr = write(modemfd, &b[len-l], l);
     if(wr < 0) {
       // TODO do something meaningful with the error code (or ignore it
       oerr << "write() in Modem::writeLine failed" << oendl;
       delete[] b;
       return false;
     }
     l -= wr;
   }
   delete[] b;
   return true;
 }
 
 
 bool Modem::hangup() {
   // this should really get the modem to hang up and go into command mode
   // If anyone sees a fault in the following please let me know, since
   // this is probably the most imporant snippet of code in the whole of
   // kppp. If people complain about kppp being stuck, this piece of code
   // is most likely the reason.
   struct termios temptty;
 
   if(modemfd >= 0) {
 
     // is this Escape & HangupStr stuff really necessary ? (Harri)
 
     if (data_mode) escape_to_command_mode();
 
     // Then hangup command
     writeLine(_pppdata->modemHangupStr().local8Bit());
diff --git a/noncore/settings/networksettings/ppp/pppdata.cpp b/noncore/settings/networksettings/ppp/pppdata.cpp
index eb03ef4..1491ea2 100644
--- a/noncore/settings/networksettings/ppp/pppdata.cpp
+++ b/noncore/settings/networksettings/ppp/pppdata.cpp
@@ -358,70 +358,70 @@ void PPPData::setpppdTimeout(int n) {
 
 const QString PPPData::modemDevice() {
   return readConfig (modemGroup(), MODEMDEV_KEY, "/dev/modem" );
 }
 
 
 // const QString PPPData::modemName()
 // {
 //     return readConfig(modemGroup(), MODEMNAME_KEY);
 // }
 
 // bool PPPData::setModemName(const QString &n) {
 //     odebug << "Setting modem name to >" << n.latin1() << "<" << oendl; 
 //     _modemName = n;
 //     writeConfig(cgroup, MODEMNAME_KEY, n);
 //     return true; //FIXME
 // }
 
 // bool PPPData::changeModemName(const QString &n) {
 //     odebug << "Setting modem name to >" << n.latin1() << "<" << oendl; 
 //     _modemName = n;
 //     writeConfig(modemGroup(), MODEMNAME_KEY, n);
 //     return true; //FIXME
 // }
 
 bool PPPData::setModemDevice(const QString &n) {
     odebug << "Setting modem dev to >" << n.latin1() << "<" << oendl; 
     writeConfig(modemGroup(), MODEMDEV_KEY, n);
     return true; //FIXME
 }
 
 
-const QString PPPData::flowcontrol() {
-  return readConfig(modemGroup(), FLOWCONTROL_KEY, "CRTSCTS");
+enum PPPData::FlowControl PPPData::flowcontrol() {
+  return static_cast<FlowControl>(readNumConfig(modemGroup(), FLOWCONTROL_KEY, FlowHardware));
 }
 
 
-void PPPData::setFlowcontrol(const QString &n) {
+void PPPData::setFlowcontrol(enum FlowControl n) {
   writeConfig(modemGroup(), FLOWCONTROL_KEY, n);
 }
 
 
 const QString PPPData::speed() {
   QString s = readConfig(modemGroup(), SPEED_KEY, "57600");
   // undo the damage of a bug in former versions. It left an empty Speed=
   // entry in kppprc. kppp did set the serial port to 57600 as default but
   // pppd wouldn't receive the speed via the command line.
   if(s.toUInt() == 0)
     s = "57600";
   return s;
 }
 
 
 void PPPData::setSpeed(const QString &n) {
   writeConfig(modemGroup(), SPEED_KEY, n);
 }
 
 
 #if 0
 void PPPData::setUseCDLine(const int n) {
   writeConfig(modemGroup(),USECDLINE_KEY,n);
 }
 
 
 int PPPData::UseCDLine() {
   return  readNumConfig(modemGroup(),USECDLINE_KEY,0);
 }
 #endif
 
 const QString  PPPData::modemEscapeStr() {
@@ -691,70 +691,70 @@ int PPPData::waitForDialTone() {
   return readNumConfig(modemGroup(), DIALTONEWAIT_KEY, 1);
 }
 
 void PPPData::setWaitForDialTone(int i) {
   writeConfig(modemGroup(), DIALTONEWAIT_KEY, i);
 }
 
 void PPPData::setModemAnswerStr(const QString &n) {
   writeConfig(modemGroup(), ANSWERSTR_KEY, n);
 }
 
 
 const QString PPPData::modemRingResp() {
   return readConfig(modemGroup(), RINGRESP_KEY, "RING");
 }
 
 
 void PPPData::setModemRingResp(const QString &n) {
   writeConfig(modemGroup(), RINGRESP_KEY, n);
 }
 
 
 const QString PPPData::modemAnswerResp() {
   return readConfig(modemGroup(), ANSWERRESP_KEY, "CONNECT");
 }
 
 
 void PPPData::setModemAnswerResp(const QString &n) {
   writeConfig(modemGroup(), ANSWERRESP_KEY, n);
 }
 
 
-const QString PPPData::enter() {
-  return readConfig(modemGroup(), ENTER_KEY, "CR");
+enum PPPData::LineTermination PPPData::enter(){
+    return static_cast<PPPData::LineTermination>(readNumConfig(modemGroup(), ENTER_KEY, EndCR));
 }
 
 
-void PPPData::setEnter(const QString &n) {
+void PPPData::setEnter(enum PPPData::LineTermination n) {
   writeConfig(modemGroup(), ENTER_KEY, n);
 }
 
 
 //
 // functions to set/return account information
 //
 
 //returns number of accounts
 int PPPData::count() const {
   return highcount + 1;
 }
 
 
 bool PPPData::setAccount(const QString &aname) {
     odebug << "setting account to >" << aname.latin1() << "<" << oendl; 
     for ( QStringList::Iterator it = accountList.begin(); it != accountList.end(); ++it ) {
         cgroup = *it;
         odebug << "PPPData::setAccount " << cgroup.latin1() << "" << oendl; 
         odebug << "iterator " << (*it).latin1() << "" << oendl; 
         if(accname() == aname) {
             odebug << "SUCCESS" << oendl; 
             return true;
         }
 
     }
     odebug << "FAILURE" << oendl; 
     return false;
 }
 
 /*
 bool PPPData::setAccountbyIndex(int i) {
diff --git a/noncore/settings/networksettings/ppp/pppdata.h b/noncore/settings/networksettings/ppp/pppdata.h
index d1cbeb5..d731b62 100644
--- a/noncore/settings/networksettings/ppp/pppdata.h
+++ b/noncore/settings/networksettings/ppp/pppdata.h
@@ -136,154 +136,165 @@ class Config;
 #define DOMAIN_KEY         "Domain"
 #define DNS_KEY            "DNS"
 #define AUTODNS_KEY        "AutoDNS"
 #define EXDNSDISABLED_KEY  "ExDNSDisabled"
 #define SCRIPTCOM_KEY      "ScriptCommands"
 #define SCRIPTARG_KEY      "ScriptArguments"
 #define PPPDARG_KEY        "pppdArguments"
 #define PPP_DEBUG_OPTION   "PPPDebug"
 #define ICONIFY_ON_CONNECT_KEY "iconifyOnConnect"
 #define DOCKING_KEY        "DockIntoPanel"
 #define TOTALCOSTS_KEY     "TotalCosts"
 #define TOTALBYTES_KEY     "TotalBytes"
 
 // pppd errors
 #define E_IF_TIMEOUT       1
 #define E_PPPD_DIED        2
 
 // account list
 #define ACCOUNTS_COUNT     "Accounts_Count"
 #define ACOUNTS_DEV        "Accounts_Modem"
 #define ACOUNTS_ACC        "Accounts_Account"
 
 #define DEVICESNAMES_LIST  "DevicesNames_List"
 #define DEVICES_LIST       "Devices_List"
 #define DEVICES_LIST_SEP   ','
 
 class PPPData {
 public:
     PPPData();
     ~PPPData() {};
 
     enum { NumInitStrings = 2 };
+    enum LineTermination {
+        EndCR,
+        EndLF,
+        EndCRLF
+    };
+
+    enum FlowControl {
+        FlowHardware,
+        FlowSoftware,
+        FlowNone
+    };
 
     // general functions
     void save();
     void cancel();
 
     QStringList getAccountList();
 
     static QMap<QString,QString> getConfiguredInterfaces();
     static void setConfiguredInterfaces( QMap<QString,QString> );
 
     // function to read/write date to configuration file
     static Config config();
     QString readConfig(const QString &, const QString &, const QString &);
     int readNumConfig(const QString &, const QString &, int);
     bool readListConfig(const QString &, const QString &,
                       QStringList &, char sep = ',');
     void writeConfig(const QString &, const QString &, const QString &);
     void writeConfig(const QString &, const QString &, int);
     void writeListConfig(const QString &, const QString &,
                        QStringList &, char sep = ',');
 
     // return the current account group
     QString currentGroup() { return cgroup; }
     QString modemGroup();
 
   // functions to set/get general kppp info
   QString password();
   void setPassword(const QString &);
 
 //  int currentAccountID() { return caccount; };
   const QString defaultAccount();
   void setDefaultAccount(const QString &);
 
   void set_xserver_exit_disconnect(bool set);
   bool get_xserver_exit_disconnect();
 
   void setPPPDebug(bool set);
   bool getPPPDebug();
 
   void set_quit_on_disconnect(bool);
   bool quit_on_disconnect();
 
   void set_show_clock_on_caption(bool set);
   bool get_show_clock_on_caption();
 
   void set_show_log_window(bool set);
   bool get_show_log_window();
 
   void set_automatic_redial(bool set);
   bool automatic_redial();
 
 //   void set_iconify_on_connect(bool set);
 //   bool get_iconify_on_connect();
 
 //   void set_dock_into_panel(bool set);
 //   bool get_dock_into_panel();
 
-  const QString enter();
-  void setEnter(const QString &);
+  enum LineTermination enter();
+  void setEnter(enum LineTermination);
 
   QString pppdVersion();
   bool pppdVersionMin(int ver, int mod, int patch);
 
   int pppdTimeout();
   void setpppdTimeout(int);
 
   int busyWait();
   void setbusyWait(int);
 
   bool modemLockFile();
   void setModemLockFile(bool set);
 
   int modemEscapeGuardTime();
   void setModemEscapeGuardTime(int i);
 
   void setModemEscapeStr(const QString &);
   const QString modemEscapeStr();
 
   void setModemEscapeResp(const QString &);
   const QString modemEscapeResp();
 
 //  const QString modemName();
 //  bool setModemName(const QString &);
 //  bool changeModemName(const QString &);
 
    const QString modemDevice();
    bool setModemDevice(const QString &);
 
-  const QString flowcontrol();
-  void setFlowcontrol(const QString &);
+  enum FlowControl flowcontrol();
+  void setFlowcontrol(enum FlowControl);
 
   int modemTimeout();
   void setModemTimeout(int);
 
   int modemToneDuration();
   void setModemToneDuration(int);
 
   QString volumeInitString();
   int volume();
   void setVolume(int);
 
   int waitForDialTone();
   void setWaitForDialTone(int i);
 
   // modem command strings/responses
   const QString modemInitStr(int i);
   void setModemInitStr(int i, const QString &);
 
   const QString modemInitResp();
   void setModemInitResp(const QString &);
 
   int modemPreInitDelay();
   void setModemPreInitDelay(int);
 
   int modemInitDelay();
   void setModemInitDelay(int);
 
   QString modemNoDialToneDetectionStr();
   void setModemNoDialToneDetectionStr(const QString &);
 
   const QString modemDialStr();
   void setModemDialStr(const QString &);