summaryrefslogtreecommitdiff
Unidiff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--libopie/big-screen/IDEAS81
-rw-r--r--libopie/big-screen/big-screen.pro2
-rw-r--r--libopie/big-screen/example/osplitter_example.cpp28
-rw-r--r--libopie/big-screen/example/osplitter_example.h20
-rw-r--r--libopie/big-screen/example/osplitter_example.obin17276 -> 0 bytes
-rw-r--r--libopie/big-screen/example/osplitter_example.pro13
-rw-r--r--libopie/big-screen/example/osplitter_mail.cpp82
-rw-r--r--libopie/big-screen/example/osplitter_mail.h49
-rw-r--r--libopie/big-screen/example/osplitter_mail.pro12
-rw-r--r--libopie/big-screen/example/owidgetstack_example.cpp131
-rw-r--r--libopie/big-screen/example/owidgetstack_example.h27
-rw-r--r--libopie/big-screen/example/owidgetstack_example.pro13
-rw-r--r--libopie/big-screen/obarcollection.h107
-rw-r--r--libopie/big-screen/obigscreen_p.h20
-rw-r--r--libopie/big-screen/omodalhelper.cpp165
-rw-r--r--libopie/big-screen/omodalhelper.h708
-rw-r--r--libopie/big-screen/osplitter.cpp583
-rw-r--r--libopie/big-screen/osplitter.h146
-rw-r--r--libopie/big-screen/owidgetstack.cpp404
-rw-r--r--libopie/big-screen/owidgetstack.h127
-rw-r--r--libopie/libopie.pro1
21 files changed, 0 insertions, 2719 deletions
diff --git a/libopie/big-screen/IDEAS b/libopie/big-screen/IDEAS
deleted file mode 100644
index 27a4d6e..0000000
--- a/libopie/big-screen/IDEAS
+++ b/dev/null
@@ -1,81 +0,0 @@
1Now that PDAs get a VGA resolution and Opie runs on Webpads
2and could be used as a Kiosk secure environment the design
3decision that were right for a 320x240/240x320 doesn't necessary
4to be right for bigger screens.
5
6Remember most desktops a few years ago had only a resolution
7of 800x600.
8Then also to remember is that a webpad with 640x480 is different to
9a PDA with the same resolution. The PDA has a much smaller
10physical display.
11
12With higher resolution the feeling of a desktop comes.
13
14Problems with current Opie:
15 -InputMethod use full width but most of the times are not high enough
16 This actually makes it harder to input and looks stupid.
17 -ToolBars only feels strange on bigger screens. Maybe do it like WinCE3 does
18 share the ToolBar with MenuBar if they're too big for the screen allow handles
19 to either show the left or right side. Note that the handle from Qt looks
20 bad and should be patched away
21 -The Escape/Close back to View does not make sense on bigger screens and desktop
22 on a desktop you might even want to show multiple views and detach from the 'system'
23 view
24 -Modality. Dunnow how you get back to the enter dialog without modality in Qt/E fix it?
25 On bigger screen this is not the problem you can move windows. But you should try
26 to be less modal in the future.
27 I've added a small to qpeapplication to iterate over the toplevel widgets 99%
28 ( click on the taskbar to iterate over the widgets first time nothing is changed )
29 , BUT it should be avoided to use modality showMaximized(), exec()
30 INSTEAD we will use a modal helper where one can register to show a dialog for uid
31 type and will get a signal once the settings need to be applied, rejected or discarded.
32 This way you can almost work like with exec(), do not need to care for freeing.
33 Problems sometimes to have more than one dialog in memory is expensive. Allow queueing
34 and reusing this widget ( only set the Record new? )
35 -Viewing on bigger screens you may want to have a seperate viewer widget ( topLevel ) which
36 might also get spon off from the normal operation. The (X) close go back does not make
37 sense on bigger screens and feels strange
38 -Sizing and Auto sizing of widgets
39
40Widgets and Classes
41
42 Toolbar/Action and Popups:
43 While KParts with XMLGUI provide a fantastic technology to change the GUI
44 on the fly. Parsing these GUI descriptions is not an option for PDAs
45 specially not on start up.
46 Instead we will need to use normal object in this case QAction and QPopupMenuss. We
47 will then group these Actions into groups. Each group can have children and one
48 parent. Each group has two attributes one for the menubar and one for the toolbar.
49 Attributes for each might be | together. Always, Never, Auto are the attributes I
50 can think of tonite. Always will place this group always there, Never yeah never,
51 Automatic lets the later described Manager decide. Also one could or MightSpinOff
52 to a group. This way a child group might get spon off if enough place is there.
53 You cann add QAction and QPopupMenus to the group the Group will not take owner ship
54 and you might use your QAction in other places as well.
55 Toplevel groups need to be registered to the manager and this manager will depending
56 on global settings place and control MenuBar and ToolBar/ToolBar.
57 This allows to dynamically create toolbar on the fly
58
59 Modality class:
60 It'll be a template with a QSignal to tell about changes and a method to get to know
61 which action to be applied. It has three template parameters one for the WIdget used
62 and one for the type of uid and the last for the editor widget which
63 at least needs to provide some methods as well.
64 If you need to edit an widget you simply tell the helper about it. If present it'll
65 raise the widget or either queue it or create a new editor depending on a policy
66 one can set manually or get from the system.
67
68 Viewing:
69 We will provide a special OWidgetStack which either is a real QWidgetStack or a QList
70 of toplevel widgets to be raised. One has to see how one can use it with todolist
71 and datebook. specially the switching back and forth need to be handled but with possible
72 no code reordering ( least intrusive )
73 Viewing II:
74 Example Advanced FM has a tabwidget but on a SIMpad it would make perfect sense to use a
75 QSplitter or QVBox. We will provide an OSplitter which either provides the one
76 or the other widget depending on the size
77
78
79These small changes ( replacing Q with O + bit more) should make Opie a better environment for
80bigger screens. The additional library memory is a fair trade off and memory can be recovered
81by other technics \ No newline at end of file
diff --git a/libopie/big-screen/big-screen.pro b/libopie/big-screen/big-screen.pro
deleted file mode 100644
index f324d3c..0000000
--- a/libopie/big-screen/big-screen.pro
+++ b/dev/null
@@ -1,2 +0,0 @@
1HEADERS += big-screen/obigscreen_p.h big-screen/osplitter.h big-screen/owidgetstack.h #big-screen/omodalhelper.h
2SOURCES += big-screen/osplitter.cpp big-screen/owidgetstack.cpp #big-screen/omodalhelper.cpp
diff --git a/libopie/big-screen/example/osplitter_example.cpp b/libopie/big-screen/example/osplitter_example.cpp
deleted file mode 100644
index e337379..0000000
--- a/libopie/big-screen/example/osplitter_example.cpp
+++ b/dev/null
@@ -1,28 +0,0 @@
1#include <qdir.h>
2#include <qlayout.h>
3
4#include "../osplitter.h"
5
6#include <qpe/qpeapplication.h>
7#include <opie/oapplicationfactory.h>
8
9#include "osplitter_example.h"
10
11OPIE_EXPORT_APP( OApplicationFactory<OSplitterExample> )
12
13OSplitterExample::OSplitterExample( QWidget *w,const char* n,WFlags f )
14 : QWidget( w, n, f ){
15 QVBoxLayout * lay = new QVBoxLayout(this);
16 OSplitter * splitter = new OSplitter( Horizontal, this );
17 lay->addWidget( splitter );
18
19 OFileSelector *selector = new OFileSelector( splitter, OFileSelector::FileSelector,
20 OFileSelector::Normal, QDir::homeDirPath(),
21 QString::null );
22 splitter->addWidget( selector, "zoom", tr("Selector 1") );
23
24 selector = new OFileSelector( splitter, OFileSelector::FileSelector, OFileSelector::Normal,
25 QDir::homeDirPath(), QString::null );
26 splitter->addWidget( selector, "zoom", tr("Selector 2") );
27
28}
diff --git a/libopie/big-screen/example/osplitter_example.h b/libopie/big-screen/example/osplitter_example.h
deleted file mode 100644
index ae8f120..0000000
--- a/libopie/big-screen/example/osplitter_example.h
+++ b/dev/null
@@ -1,20 +0,0 @@
1/*
2 * May be used, copied and modified wihtout any limitation
3 */
4
5#ifndef OSPlitter_EXAMPLE_H
6#define OSPlitter_EXAMPLE_H
7
8#include <qvbox.h>
9#include <opie/ofileselector.h>
10
11class OSplitterExample : public QWidget {
12 Q_OBJECT
13public:
14 static QString appName() { return QString::fromLatin1("osplitter_example"); }
15 OSplitterExample( QWidget *parent, const char* name, WFlags fl );
16
17};
18
19
20#endif
diff --git a/libopie/big-screen/example/osplitter_example.o b/libopie/big-screen/example/osplitter_example.o
deleted file mode 100644
index e52d5d9..0000000
--- a/libopie/big-screen/example/osplitter_example.o
+++ b/dev/null
Binary files differ
diff --git a/libopie/big-screen/example/osplitter_example.pro b/libopie/big-screen/example/osplitter_example.pro
deleted file mode 100644
index b12bf17..0000000
--- a/libopie/big-screen/example/osplitter_example.pro
+++ b/dev/null
@@ -1,13 +0,0 @@
1CONFIG = qt warn_on
2TEMPLATE = app
3TARGET = osplitter_example
4
5HEADERS = osplitter_example.h ../osplitter.h
6SOURCES = osplitter_example.cpp ../osplitter.cpp
7
8INCLUDEPATH += $(OPIEDIR)/include ../
9DEPENDSPATH += $(OPIEDIR)/include
10
11LIBS += -lqpe -lopie
12
13include ( $(OPIEDIR)/include.pro ) \ No newline at end of file
diff --git a/libopie/big-screen/example/osplitter_mail.cpp b/libopie/big-screen/example/osplitter_mail.cpp
deleted file mode 100644
index 4356baa..0000000
--- a/libopie/big-screen/example/osplitter_mail.cpp
+++ b/dev/null
@@ -1,82 +0,0 @@
1
2#include <qstring.h>
3#include <qlabel.h>
4#include <qheader.h>
5#include <qlayout.h>
6
7#include <qpe/qpeapplication.h>
8#include <opie/oapplicationfactory.h>
9
10#include "../osplitter.h"
11
12#include "osplitter_mail.h"
13
14
15OPIE_EXPORT_APP( OApplicationFactory<ListViews> )
16
17class Folder {
18 int dummy;
19};
20
21// -----------------------------------------------------------------
22
23ListViews::ListViews( QWidget* p, const char* name, WFlags fl )
24 : QWidget( p, name, fl ) {
25 qApp->installEventFilter( this );
26 m_lstFolders.setAutoDelete( true );
27 QHBoxLayout *lay = new QHBoxLayout(this);
28
29 m_splitter = new OSplitter( Horizontal, this, "SPlitter 1" );
30 lay->addWidget( m_splitter );
31 connect(m_splitter, SIGNAL(sizeChange(bool,const QSize&) ),
32 this, SLOT(slotSizeChange(bool,const QSize&) ) );
33
34 m_overview = new QListView( m_splitter );
35 m_overview->header()->setClickEnabled( FALSE );
36 m_overview->addColumn( tr("Folder") );
37 m_overview->setMaximumWidth( 200 );
38 m_splitter->addWidget( m_overview, "zoom", tr("Folder Overview") );
39 m_splitter->setSizeChange( 300 );
40
41 /* OSplitter starts with the small mode */
42 m_messages = 0;
43 m_message = m_attach = 0;
44
45 splitti = new OSplitter( Vertical, m_splitter, "Splitti2" );
46 splitti->setSizeChange( 300 );
47 splitti->setSizePolicy( QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding ) );
48
49 QLabel *lbl = new QLabel(splitti);
50 lbl->setTextFormat ( Qt::RichText );
51 lbl->setText("<br><br><b>Test Test Test</b><br><br><p>Fooooo hjhh</p>");
52
53 m_messages = new QListView( splitti );
54 m_messages->addColumn(" Messages ");
55
56 folder1 = new QListView( splitti );
57 folder1->addColumn( "Messages 2 " );
58
59 splitti->addWidget(m_messages, "mail", tr("Mails") );
60 splitti->addWidget(folder1, "folder", tr("Folder") );
61 splitti->addWidget( lbl, "logo", tr("Label") );
62 m_message = lbl;
63
64 m_splitter->addWidget( splitti );
65
66}
67
68
69ListViews::~ListViews() {
70
71}
72
73
74bool ListViews::eventFilter( QObject* obj, QEvent* ev ) {
75 if (!obj->isWidgetType() )
76 return false;
77 if ( ev->type() == QEvent::MouseButtonRelease ) {
78 qWarning(" name %s, class %s", obj->name(), obj->className() );
79 }
80
81 return false;
82}
diff --git a/libopie/big-screen/example/osplitter_mail.h b/libopie/big-screen/example/osplitter_mail.h
deleted file mode 100644
index b7e7efe..0000000
--- a/libopie/big-screen/example/osplitter_mail.h
+++ b/dev/null
@@ -1,49 +0,0 @@
1/*
2 * You may use, modify and distribute this code without any limitation
3 */
4
5/*
6 * Header file for a more complete email client like
7 * layout
8 */
9
10#ifndef OPIE_SPLITTER_MAIL_EXAMPLE_H
11#define OPIE_SPLITTER_MAIL_EXAMPLE_H
12
13#include <qwidget.h>
14#include <qlist.h>
15#include <qlistview.h>
16
17class Folder;
18class QLabel;
19
20class OSplitter;
21class ListViews : public QWidget {
22 Q_OBJECT
23public:
24 static QString appName() { return QString::fromLatin1("osplitter-mail"); }
25 ListViews( QWidget* parent, const char * name, WFlags fl );
26 ~ListViews();
27
28 bool eventFilter( QObject* , QEvent* );
29private:
30 void initFolders();
31 void initFolder( Folder *folder, unsigned int &count );
32
33 QListView *m_messages, *m_overview;
34 QLabel *m_message, *m_attach;
35 QList<QListView> m_folders; // used in tab mode
36 QList<Folder> m_lstFolders;
37 bool m_mode : 1; // bitfield
38 OSplitter *m_splitter;
39 OSplitter *splitti;
40 QListView *folder1;
41#if 0
42//private slots:
43// void slotFolderChanged( QListViewItem* );
44// void slotMessageChanged();
45// void slotSizeChange( bool, const QSize& );
46#endif
47};
48
49#endif
diff --git a/libopie/big-screen/example/osplitter_mail.pro b/libopie/big-screen/example/osplitter_mail.pro
deleted file mode 100644
index ec6e626..0000000
--- a/libopie/big-screen/example/osplitter_mail.pro
+++ b/dev/null
@@ -1,12 +0,0 @@
1CONFIG += qt warn_on
2TEMPLATE = app
3TARGET = osplitter-mail
4
5INCLUDEPATH += $(OPIEDIR)/include
6DEPENDSPATH += $(OPIEDIR)/include
7
8HEADERS = osplitter_mail.h
9SOURCES = osplitter_mail.cpp
10
11LIBS += -lqpe -lopie
12include ( $(OPIEDIR)/include.pro )
diff --git a/libopie/big-screen/example/owidgetstack_example.cpp b/libopie/big-screen/example/owidgetstack_example.cpp
deleted file mode 100644
index a6b8201..0000000
--- a/libopie/big-screen/example/owidgetstack_example.cpp
+++ b/dev/null
@@ -1,131 +0,0 @@
1/*
2 * You may use, modify and distribute this example without any limitation
3 */
4
5#include <qaction.h>
6#include <qtoolbar.h>
7#include <qpopupmenu.h>
8#include <qmenubar.h>
9#include <qlayout.h>
10#include <qlabel.h>
11#include <qpushbutton.h>
12#include <qsignalmapper.h>
13
14#include <qpe/resource.h>
15
16#include "../owidgetstack.h"
17
18#include "owidgetstack_example.h"
19
20#include <qpe/qpeapplication.h>
21#include <opie/oapplicationfactory.h>
22
23OPIE_EXPORT_APP( OApplicationFactory<StackExample> )
24
25StackExample::StackExample( QWidget* parent, const char* name, WFlags fl )
26 : QMainWindow( parent, name, fl )
27{
28 m_stack = new OWidgetStack( this );
29 setCentralWidget( m_stack );
30
31 /* nice Signal Mapper ;) */
32 QSignalMapper *sm = new QSignalMapper(this);
33 connect(sm, SIGNAL(mapped(int) ), m_stack, SLOT(raiseWidget(int)) );
34
35 /* toolbar first but this should be known from the other examples */
36 setToolBarsMovable( false );
37
38 /* only a menubar here */
39 QToolBar* holder = new QToolBar( this );
40 holder->setHorizontalStretchable( true );
41
42 QMenuBar *bar = new QMenuBar( holder );
43 QPopupMenu *menu = new QPopupMenu( this );
44
45 QAction* a = new QAction( tr("Show MainWidget"), Resource::loadPixmap("zoom"),
46 QString::null, 0, this, 0 );
47 sm->setMapping(a, 1 );
48 connect(a, SIGNAL(activated() ),
49 sm, SLOT(map() ) );
50 a->addTo( menu );
51
52 a = new QAction( tr("Show Details Small"), Resource::loadPixmap("zoom"),
53 QString::null, 0, this, 0 );
54 sm->setMapping(a, 2 );
55 connect(a, SIGNAL(activated() ),
56 sm, SLOT(map() ) );
57 a->addTo( menu );
58
59 a = new QAction( tr("Show Details More"), Resource::loadPixmap("zoom"),
60 QString::null, 0, this, 0 );
61 sm->setMapping(a, 3 );
62 connect(a, SIGNAL(activated() ),
63 sm, SLOT(map() ) );
64 a->addTo( menu );
65
66 a = new QAction( tr("Show Details All"), Resource::loadPixmap("zoom"),
67 QString::null, 0, this, 0 );
68 sm->setMapping(a, 4 );
69 connect(a, SIGNAL(activated() ),
70 sm, SLOT(map() ) );
71
72 bar->insertItem( tr("Actions"), menu );
73
74 /* now the gui */
75
76 /* first widget, main widget */
77 QWidget * wid = new QWidget( m_stack );
78 QGridLayout *grid = new QGridLayout(wid, 2, 2 );
79
80 QPushButton *btn = new QPushButton( tr("Show Details Small"), wid, "details1" );
81 sm->setMapping(btn, 2 );
82 connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) );
83 grid->addWidget( btn, 0, 0 );
84
85 btn = new QPushButton( tr("Show Details Medium"), wid, "details2");
86 sm->setMapping(btn, 3 );
87 connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) );
88 grid->addWidget( btn, 0, 1 );
89
90 btn = new QPushButton( tr("Show Details All"), wid, "details3");
91 sm->setMapping(btn, 4 );
92 connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) );
93 grid->addWidget( btn, 1, 1 );
94
95 m_stack->addWidget( wid, 1 );
96 m_main = wid;
97
98 QLabel *lbl = new QLabel(m_stack );
99 lbl->setText(tr("Only small Details are shown here. Määh") );
100 m_stack->addWidget( lbl, 2 );
101
102 lbl = new QLabel( m_stack );
103 lbl->setText( tr("Some more details....Wo ist das Schaf?") );
104 m_stack->addWidget( lbl, 3 );
105
106 lbl = new QLabel( m_stack );
107 lbl->setText( tr("<qt>Ne nicht in Bayerisch Gmain sondern in Berlin<br>Vermiss und meine Augen werden nicht eckig, da mein Bildschirm abgerundet ist<br>Es lebe Hamburg Süd,weiss du, verstehst du? ;)<br>Susi ist dOOf, es lebe die Ofenecke...", "hard to translate that") );
108 m_stack->addWidget( lbl, 4 );
109
110
111 /* THE signal mapper does all the magic */
112 m_stack->raiseWidget( m_main );
113}
114
115
116StackExample::~StackExample() {
117
118}
119
120
121
122void StackExample::closeEvent( QCloseEvent* ev) {
123 /* if the close even came when we displayed a details */
124 if (m_stack->visibleWidget() != m_main ) {
125 m_stack->raiseWidget( m_main );
126 ev->ignore();
127 return;
128 }
129
130 ev->accept();
131}
diff --git a/libopie/big-screen/example/owidgetstack_example.h b/libopie/big-screen/example/owidgetstack_example.h
deleted file mode 100644
index 7977b48..0000000
--- a/libopie/big-screen/example/owidgetstack_example.h
+++ b/dev/null
@@ -1,27 +0,0 @@
1/*
2 * You may use, modify and distribute this example without any limitation
3 */
4
5#ifndef O_STACK_EXAMPLE_SIMPLE_H
6#define O_STACK_EXAMPLE_SIMPLE_H
7
8#include <qmainwindow.h>
9
10
11class OWidgetStack;
12class StackExample : public QMainWindow {
13 Q_OBJECT
14public:
15 StackExample( QWidget* paren, const char* name, WFlags fl );
16 ~StackExample();
17 static QString appName() { return QString::fromLatin1("owidgetstack-example"); }
18
19protected:
20 void closeEvent( QCloseEvent* e );
21private:
22 OWidgetStack* m_stack;
23 QWidget* m_main;
24
25};
26
27#endif
diff --git a/libopie/big-screen/example/owidgetstack_example.pro b/libopie/big-screen/example/owidgetstack_example.pro
deleted file mode 100644
index ad1dc09..0000000
--- a/libopie/big-screen/example/owidgetstack_example.pro
+++ b/dev/null
@@ -1,13 +0,0 @@
1CONFIG += qt warn_on
2TEMPLATE = app
3TARGET = owidgetstack-example
4
5SOURCES = ../owidgetstack.cpp owidgetstack_example.cpp
6HEADERS = ../owidgetstack.h owidgetstack_example.h
7
8INCLUDEPATH += $(OPIEDIR)/include
9DEPENDSPATH += $(OPIEDIR)/include
10
11LIBS += -lqpe
12
13include ( $(OPIEDIR)/include.pro )
diff --git a/libopie/big-screen/obarcollection.h b/libopie/big-screen/obarcollection.h
deleted file mode 100644
index 5822360..0000000
--- a/libopie/big-screen/obarcollection.h
+++ b/dev/null
@@ -1,107 +0,0 @@
1/*
2               =. This file is part of the OPIE Project
3             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
4           .>+-=
5 _;:,     .>    :=|. This library is free software; you can
6.> <`_,   >  .   <= redistribute it and/or modify it under
7:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
8.="- .-=="i,     .._ License as published by the Free Software
9 - .   .-<_>     .<> Foundation; either version 2 of the License,
10     ._= =}       : or (at your option) any later version.
11    .%`+i>       _;_.
12    .i_,=:_.      -<s. This library is distributed in the hope that
13     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
14    : ..    .:,     . . . without even the implied warranty of
15    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
16  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
17..}^=.=       =       ; Library General Public License for more
18++=   -.     .`     .: details.
19 :     =  ...= . :.=-
20 -.   .:....=;==+<; You should have received a copy of the GNU
21  -_. . .   )=.  = Library General Public License along with
22    --        :-=` this library; see the file COPYING.LIB.
23 If not, write to the Free Software Foundation,
24 Inc., 59 Temple Place - Suite 330,
25 Boston, MA 02111-1307, USA.
26
27*/
28
29#ifndef HAZE_OBAR_EXTENSION
30#define HAZE_OBAR_EXTENSION
31
32#include <qstring.h>
33#include <qwidget.h>
34
35class QAction;
36class QPopupMenu;
37
38/*
39 * ### TODO
40 * -Consider Life Updates
41 * -Make ValueBased like Opie-featurelist
42 */
43
44/**
45 * The different screen sizes have different look and feel. On bigger
46 * screens only a QToolBar feels strange. One is at least known to have
47 * a Help-Menu, a File Menu with Quit/Exit but instead of providing two
48 * different ways / two action sets we will group actions to gether and give
49 * them attributes when and where we might want them to be visible.
50 * We can also group actions. For example you could Group All Actions
51 * into the File Group. This means with many actions you would only have more toolbar
52 * actions but many sub menus in File. On bigger screen this would automatically
53 * expand to a full blown MenuBar and ToolButtons.
54 *
55 * @short Grouping of actions for dynamic Bar Generation
56 * @version 0.01
57 * @author hOlgAr
58 */
59class OBarGroup {
60public:
61 enum Preference { Allways, Never, IfPlace };
62 OBarGroup( const QString& name, enum Preference groupPreference );
63 ~OBarGroup();
64
65 void add( QAction* action, enum Preference menuPreference,
66 enum Preference toolpreference );
67 void add( const QString&, QPopupMenu* );
68
69 void add( OBarGroup* );
70
71 void remove( QAction* action );
72 void remove( QMap* );
73
74protected:
75 OBarGroup* parent()const;
76
77private:
78};
79
80
81/**
82 * Add your groups in order to the bar manager
83 * and either call createGUI() on it, or tell it
84 * it the mainwindow and it is listening to the show event
85 * and then creates the toolbar
86 */
87class OBarManager : public QObject{
88public:
89 OBarManager( QWindow* parent );
90 ~OBarManager();
91
92 void add( OBarGroup*, int pos = -1 );
93 void remove( OBarGroup* );
94
95 bool eventFilter( QObject* , QEvent* );
96
97public slots:
98 void createGUI();
99};
100
101/*
102 * ### TODO GUI merging
103 */
104
105#endif
106
107
diff --git a/libopie/big-screen/obigscreen_p.h b/libopie/big-screen/obigscreen_p.h
deleted file mode 100644
index ed256d9..0000000
--- a/libopie/big-screen/obigscreen_p.h
+++ b/dev/null
@@ -1,20 +0,0 @@
1#ifndef OPIE_BIG_SCREEN_PRIVATE
2#define OPIE_BIG_SCREEN_PRIVATE
3
4namespace Opie {
5
6struct OSplitterContainer {
7 bool operator==( const OSplitterContainer& o)const {
8 if (widget != o.widget ) return false;
9 if (icon != o.icon ) return false;
10 if (name != o.name ) return false;
11 return true;
12 }
13 QWidget* widget;
14 QString icon;
15 QString name;
16};
17
18}
19
20#endif
diff --git a/libopie/big-screen/omodalhelper.cpp b/libopie/big-screen/omodalhelper.cpp
deleted file mode 100644
index c5a47b3..0000000
--- a/libopie/big-screen/omodalhelper.cpp
+++ b/dev/null
@@ -1,165 +0,0 @@
1/*
2               =. This file is part of the OPIE Project
3             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
4           .>+-=
5 _;:,     .>    :=|. This library is free software; you can
6.> <`_,   >  .   <= redistribute it and/or modify it under
7:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
8.="- .-=="i,     .._ License as published by the Free Software
9 - .   .-<_>     .<> Foundation; either version 2 of the License,
10     ._= =}       : or (at your option) any later version.
11    .%`+i>       _;_.
12    .i_,=:_.      -<s. This library is distributed in the hope that
13     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
14    : ..    .:,     . . . without even the implied warranty of
15    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
16  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
17..}^=.=       =       ; Library General Public License for more
18++=   -.     .`     .: details.
19 :     =  ...= . :.=-
20 -.   .:....=;==+<; You should have received a copy of the GNU
21  -_. . .   )=.  = Library General Public License along with
22    --        :-=` this library; see the file COPYING.LIB.
23 If not, write to the Free Software Foundation,
24 Inc., 59 Temple Place - Suite 330,
25 Boston, MA 02111-1307, USA.
26
27*/
28
29#include <qpushbutton.h>
30#include <qvbox.h>
31#include <qlayout.h>
32#include <qlabel.h>
33
34#include "omodalhelper.h"
35
36
37/* SIgnal handling */
38OModalHelperSignal::OModalHelperSignal( OModalHelperBase* base, QObject* parent )
39 : QObject( parent, "OModal Helper Signal" ), m_base( base ) {
40}
41
42OModalHelperSignal::~OModalHelperSignal() {
43 /* special the ancestor deletes its creator */
44 delete m_base;
45}
46
47
48/* Helper Controler */
49/*
50 * the dialogs signal will be slotted here
51 * and we will call into m_base
52 */
53OModalHelperControler::OModalHelperControler( OModalHelperBase* base, QObject* parent )
54 : QObject(parent, "OModal Helper Controler" ), m_base( base ), m_dia( 0 ), m_id( -1 )
55{
56}
57
58TransactionID OModalHelperControler::transactionID()const {
59 return m_id;
60}
61
62void OModalHelperControler::setTransactionID( TransactionID id ) {
63 m_dia = 0;
64 m_id = id;
65}
66
67QDialog* OModalHelperControler::dialog()const {
68 return m_dia;
69}
70
71/*
72 * If we're in the New mode we will map the QDialog
73 * to the TransactionID
74 */
75void OModalHelperControler::done( int result ) {
76 if ( sender() && !sender()->isA("OModalQueuedDialog") )
77 m_dia = static_cast<QDialog*>( sender() );
78
79 m_base->done( result, m_id );
80}
81
82void OModalHelperControler::next() {
83 m_base->next( m_id );
84}
85
86void OModalHelperControler::prev() {
87 m_base->prev( m_id );
88}
89
90/* The Queued Dialog inclusive QueuedBar */
91struct OModalQueueBar : public QHBox {
92 QPushButton* next;
93 QPushButton* prev;
94 QLabel * label;
95
96 OModalQueueBar( QWidget* parent );
97 void setText( const QString& str );
98};
99
100OModalQueueBar::OModalQueueBar( QWidget* parent )
101 : QWidget( parent, "OModal Queue Bar" ) {
102 prev = new QPushButton( this );
103 prev->setText( OModalQueuedDialog::tr("Prev") );
104
105 label = new QLabel(this);
106
107 next = new QPushButton( this );
108 next->setText( OModalQueuedDialog::tr("Next") );
109}
110
111void OModalQueueBar::setText( const QString& str ) {
112 label->setText( str );
113}
114
115
116OModalQueuedDialog::OModalQueuedDialog( QDialog* mainWidget )
117 : QDialog(0, "OModal Queued Dialog" )
118{
119 QVBoxLayout *lay = new QVBoxLayout( this );
120
121 m_bar = new OModalQueueBar( this );
122 lay->addWidget( m_bar );
123
124 m_center = mainWidget;
125 m_center->reparent(this, 0, QPoint(0, 0) );
126 lay->addWidget( m_center );
127
128
129 connect(m_bar->next, SIGNAL(clicked() ), this,
130 SIGNAL(next() ) );
131 connect(m_bar->prev, SIGNAL(clicked() ), this,
132 SIGNAL(prev() ) );
133
134}
135
136OModalQueuedDialog::~OModalQueuedDialog() {
137}
138
139QDialog* OModalQueuedDialog::centerDialog()const {
140 return m_center;
141}
142
143void OModalQueuedDialog::setQueueBarEnabled( bool b) {
144 /* in Qt3 use setEnabled( bool ) */
145 if (b)
146 m_bar->show();
147 else
148 m_bar->hide();
149}
150
151void OModalQueuedDialog::setRecord( int record, int count ) {
152 if (!record && !count ) {
153 hide();
154 return;
155 }else
156 show();
157
158 if ( count > 1 )
159 m_bar->show();
160 else
161 m_bar->hide();
162
163 m_bar->setText( tr("Editing record %1 out of %2",
164 "Shows the current edited record out of an array of records").arg( record ). arg( count ) );
165}
diff --git a/libopie/big-screen/omodalhelper.h b/libopie/big-screen/omodalhelper.h
deleted file mode 100644
index 78a2ac9..0000000
--- a/libopie/big-screen/omodalhelper.h
+++ b/dev/null
@@ -1,708 +0,0 @@
1/*
2               =. This file is part of the OPIE Project
3             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
4           .>+-=
5 _;:,     .>    :=|. This library is free software; you can
6.> <`_,   >  .   <= redistribute it and/or modify it under
7:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
8.="- .-=="i,     .._ License as published by the Free Software
9 - .   .-<_>     .<> Foundation; either version 2 of the License,
10     ._= =}       : or (at your option) any later version.
11    .%`+i>       _;_.
12    .i_,=:_.      -<s. This library is distributed in the hope that
13     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
14    : ..    .:,     . . . without even the implied warranty of
15    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
16  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
17..}^=.=       =       ; Library General Public License for more
18++=   -.     .`     .: details.
19 :     =  ...= . :.=-
20 -.   .:....=;==+<; You should have received a copy of the GNU
21  -_. . .   )=.  = Library General Public License along with
22    --        :-=` this library; see the file COPYING.LIB.
23 If not, write to the Free Software Foundation,
24 Inc., 59 Temple Place - Suite 330,
25 Boston, MA 02111-1307, USA.
26
27*/
28
29#ifndef HAZE_OMODAL_HELPER_H
30#define HAZE_OMODAL_HELPER_H
31
32#include <qdialog.h>
33#include <qwidget.h>
34#include <qvaluelist.h>
35#include <qmap.h>
36#include <qvariant.h>
37
38typedef int TransactionID;
39
40class OModalHelperControler;
41class OModalHelperSignal;
42class QDialog;
43
44struct OModalHelperBase {
45 virtual void done( int status, TransactionID ) = 0;
46 virtual void next( TransactionID ) = 0;
47 virtual void prev( TransactionID ) = 0;
48};
49
50/**
51 * Modality sucks! ;) But it is easy to work with
52 * do exec() on a dialog and you know everything is funky.
53 * You only need to have one Dialog loaded and so on.
54 * This class helps you to work like with modality and help
55 * you to keep things in sync
56 * It's a template class but it sends signals once one Item is ready
57 * the signals contains the status and id of the item and then you
58 * need fetch it.
59 * Handled Records will stay available until the first call to retrieve
60 * either the record via the TransactionID or via the QValueList<Record>. Note
61 * that most functions do not take handled records into account.
62 * Also if you edit an record external you can tell this class and it'll
63 * call the merge() function of your widget to maybe merge in these changes.
64 * It also supports multiple modes. Either it can create new dialogs
65 * for each item or it can queue them depending on your usage. But it is
66 * so smart that if only one item is shown that the queue bar is not shown
67 * See the example for simple usage.
68 *
69 * @short helps to life without modaility
70 * @author hOlgAr
71 * @version 0.01
72 */
73template<class Dialog, class Record, typename Id = int>
74class OModalHelper : private OModalHelperBase{
75 friend class OModalHelperSignal;
76 friend class OModalHelperControler;
77public:
78 typedef QValueList<Record> RecordList;
79 typedef QMap<Id, Record> IdMap;
80 typedef QMap<TransactionID, Id> TransactionMap;
81 typedef QMap<QDialog*, TransactionID> DialogMap
82 enum Mode { Queue, New };
83 OModalHelper(enum Mode mode, QObject* parnet );
84
85 bool handles( Id id)const;
86 TransactionID transactionID( Id id)const;
87
88 void suspend( bool = true );
89
90 void cancel();
91 void cancel( TransactionID );
92
93 void connectDone( QObject* rec, const char* slot );
94 void connectAccepted( QObject* rec, const char* slot );
95 void connectRejected( QObject* rec, const char* slot );
96
97 TransactionID handle( Id id, const Record& rec = Record() );
98
99 void edited( Id, int what, const QVariant& data );
100
101 Record record( TransactionID )const;
102 RecordList recordsDone()const;
103private:
104 virtual void done( int, TransactionID );
105 virtual void next( TransactionID );
106 virtual void prev( TransactionID );
107
108 Record nextRecord( TransactionID &, int & )const;
109 Record prevRecord( TransactionID &, int & )const;
110 int pos( TransactionID )const;
111 Dialog* newDialogRecord( const Record& );
112
113private:
114 OModalHelperDialog *queuedDialog()const; // generate or recycle
115 OModalHelperDialog *m_dialog;
116 OModalHelperSignal *m_signal; // our signal
117 OModalHelperControler *m_controler;
118 IdMap m_ids; // maps ids (uids) to a record
119 IdMap m_doneIds;
120 TransactionMap m_transactions; // activate transactions
121 TransactionMap m_done; // done and waiting for getting picked
122 DialogMap m_editing; // only used for New Mode
123 enum Mode m_mode; // the mode we're in
124 bool m_disabled :1;
125};
126
127
128
129/* ### FIXME use namespace with Qt3 */
130
131/*
132 * A note on flow. The Signal is used for QT Signals when
133 * a record is done.
134 * There is either one controler and this controler slot will
135 * be connected to a dialog signal.
136 * In Queue we get the next and prev signals and call the Helper.
137 * this then changes the Record of the dialog and sets the transactionId
138 * of the controler.
139 * For the new mode
140 *
141 */
142
143class OModalHelperSignal : public QObject {
144 Q_OBJECT
145public:
146 OModalHelperSignal(OModalHelperBase* base, QObject* parent);
147 ~OModalHelperSignal();
148
149signals:
150 done( int status, TransactionID transaction );
151 accepted( TransactionID transaction );
152 rejected( TransactionID transaction );
153
154private:
155 OModalHelperBase* m_base;
156};
157
158
159class OModalHelperControler : public QObject {
160 Q_OBJECT
161public:
162 OModalHelperControler( OModalHelperBase* , QObject* parent);
163 virtual TransactionID transactionID()const;
164 void setTransactionID( TransactionID id );
165 QDialog* dialog()const;
166
167public slots:
168 virtual void done(int result );
169 virtual void next();
170 virtual void prev();
171private:
172 QDialog *m_dia;
173 TransactionID m_id;
174 OModalHelperBase *m_base;
175}
176
177struct OModalQueueBar;
178class OModalQueuedDialog : public QDialog {
179 Q_OBJECT
180public:
181 OModalQueuedDialog(QDialog *mainWidget);
182 ~OModalQueuedDialog();
183
184 QDialog* centerDialog()const;
185
186 void setQueueBarEnabled( bool = true );
187 void setRecord( int record, int count );
188
189signals:
190 void next();
191 void prev();
192
193private:
194 OModalQueueBar *m_bar;
195 QDialog *m_center;
196};
197
198
199/*
200 * Tcpp Template Implementation
201 */
202
203/**
204 * This is the simple Template c'tor. It takes the mode
205 * this helper should operate in and the parent object.
206 * This helper will be deleted when the parent gets deleted
207 * or you delete it yourself.
208 *
209 * @param mode The mode this dialog should be in
210 * @param parent The parent QObject of this helper.
211 */
212template<class Dialog, class Record, typename Id>
213OModalHelper<Dialog, Record, Id>::OModalHelper( enum Mode mode, QObject* parent ) {
214 m_disabled = false;
215 m_mode = mode;
216 m_signal = new OModalHelperSignal( this, parent );
217 m_controler = new OModalHelperControler( this, m_signal );
218}
219
220
221/**
222 * This functions looks for your record and sees if it is
223 * handled with this helper. Note that done records
224 * will not be returned.
225 *
226 * @return true if the record is currenlty edited otherwise false
227 *
228 * @param Id The id which might be handled
229 */
230template<class Dialog, class Record, typename Id>
231bool OModalHelper<Dialog, Record, Id>::handles( Id id )const {
232 if ( m_transactions.isEmpty() )
233 return false;
234
235 TransactionMap::ConstIterator it = m_transactions.begin();
236 for ( ; it != m_transactions.end(); ++it )
237 if ( it.data() == id )
238 return true;
239
240 return false;
241}
242
243
244/**
245 * just like handles( Id ) but returns the TransactionId
246 */
247template<class Dialog, class Record, typename Id>
248TransactionID OModalHelper<Dialog, Record, Id>::transactionID( Id id)const {
249 if ( m_transactions.isEmpty() || !m_ids.contains( id ) )
250 return 0;
251
252 TransactionMap::ConstIterator it = m_transactions.begin();
253 for ( ; it != m_transactions.end(); ++it )
254 if ( it.data() == id )
255 return it.key();
256
257 return 0;
258}
259
260/**
261 * If you're requested to flush your data and you do not want
262 * to call cancel with this method you can disable and enabled
263 * all dialogs.
264 * The state gets saved so if you want to handle a new record the dialog
265 * will be disabled as well.
266 *
267 * @param sus If true setDisabled(TRUE) will be called otherwise FALSE
268 */
269template<class Dialog, class Record, typename Id>
270void OModalHelper<Dialog, Record, Id>::suspend(bool sus) {
271 m_disabled = sus;
272 if (m_mode == New )
273 for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
274 it.key()->setDisabled( sus );
275 else if (m_dialog )
276 queuedDialog()->setDisabled( sus );
277}
278
279/**
280 * Cancel will cancel all current operations and clear the list
281 * of done operations as well.
282 * This also clears all done operations you did not popped
283 */
284template<class Dialog, class Record, typename Id>
285void OModalHelper<Dialog, Record, Id>::cancel() {
286 m_ids.clear();
287 m_doneIds.clear();
288 m_done.clear();
289 m_transactions.clear();
290
291 /* we also need to remove the QDialogs */
292 /* and hide the queue dialog if present */
293 if (m_mode == New && !m_editing.isEmpty() ) {
294 for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
295 delete it.key();
296
297 m_editing.clear();
298 }else if (m_dialog )
299 queuedDialog()->setRecord( 0, 0 );
300
301 m_controler->setTransactionID( 0 );
302}
303
304
305/**
306 * This cancels editing of the record behind the Transaction Number
307 * Note that if editing is already done it will also be removed from this list
308 */
309template<class Dialog, class Record, typename Id>
310void OModalHelper::cancel( TransactionID tid ) {
311 /* wrong tid */
312 if (!m_transactions.contains( tid ) && !m_done.contains( tid) )
313 return;
314
315 if (m_mode == New )
316 /* reverse map eek */
317 for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
318 if ( it.data() == tid ) {
319 it.key()->hide();
320 delete it.key();
321 it = m_editing.remove( it );
322 break;
323 }
324
325 /* now remove from the various maps done and currently editing map*/
326 if (m_transactions.contains( tid ) )
327 m_ids.remove( m_transactions[tid] );
328 if (m_done.contains( tid ) )
329 m_doneIds.remove( m_done[tid ] );
330 m_done.remove( tid );
331 m_transactions.remove( tid );
332
333 next( 0 );
334}
335
336/**
337 * Connect to the done Signal. SIGNAL( done(int, TransactionID ) )
338 * This signal gets emitted whenever a Record was accepted or rejected
339 *
340 * @param rec The object where the slot belongs to
341 * @param slot The slot which should be called. See the needed parameter above
342 */
343template<class Dialog, class Record, typename Id>
344void OModalHelper<Dialog, Record, Id>::connectDone( QObject* rec, const char* slot ) {
345 QObject::connect(m_signal, SIGNAL(done(int, TransactionID) ),
346 rec, slot );
347}
348
349/**
350 * Connect to the accepted Signal. SIGNAL( accepted(TransactionID ) )
351 * This signal gets emitted whenever a Record was accepted
352 *
353 * @param rec The object where the slot belongs to
354 * @param slot The slot which should be called. See the needed parameter above
355 */
356template<class Dialog, class Record, typename Id>
357void OModalHelper<Dialog, Record, Id>::connectAccepted( QObject* rec, const char* slot ) {
358 QObject::connect(m_signal, SIGNAL(accepted(TransactionID) ),
359 rec, slot );
360}
361
362/**
363 * Same as the accepted method but this one gets emitted if the dialog
364 * got rejected.
365 * SIGNAL( rejected(TransactionID) )
366 *
367 * @param rec The QObject of the slot
368 * @param slot The slot make sure the signature is correct
369 */
370template<class Dialog, class Record, typename Id>
371void OModalHelper<Dialog, Record, Id>::connectRejected( QObject* rec, const char* slot ) {
372 QObject::connect(m_signal, SIGNAL(rejected(TransactionID) ),
373 rec, slot );
374}
375
376/**
377 * Tell the helper to handle a record. If the record is currently handled
378 * it will be made active.
379 * Already handled record which are waiting getting popped are not taken into account
380 * Otherwise this helpers make the record editable.
381 * The record supplied needs to have a valid copy operator and constructor.
382 * In the case where the record is already present the parameter gets discarded.
383 * If you want the new record to be taken you need to cancel the Transaction first
384 *
385 * @param id The Identification of the Record. For PIM it would uid()
386 * @param rec The record we want to be edited
387 *
388 * @returns This functions returns the TransactionId assigned to the record
389 *
390 */
391template<class Dialog, class Record, typename Id>
392TransactionID OModalHelper<Dialog, Record, Id>::handle( Id id, const Record& rec ) {
393 static TransactionID t_id = 0;
394 /*
395 *this method consists out of two parts divided each into New and Queued Mode.
396 * Either we have the dialog already, in this case we need to highlight the widget
397 * Or we need to add it.
398 */
399 TransactionID tid = 0;
400 /* we already have the record lets see if it was done or not */
401 if ( !(tid = transactionID( id ) ) ) {
402 if (m_mode == New ) {
403 /* lets find the dialog and show it need to reverse map*/
404 for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
405 if ( it.data() == tid )
406 it.key()->show();
407 }else if (m_controler->transactionID() != tid ) {
408 int po = pos( tid );
409 m_controler->setTransactionID( tid );
410 static_cast<Dialog*>( queuedDialog()->centerDialog() )->setRecord( m_ids[ m_transactions[tid] ] );
411 queuedDialog()->setRecord( po, m_transactions.count() );
412 }
413 }else {
414 tid = ++t_id;
415 m_transactions.insert( tid, id );
416 m_ids.insert( id, rec );
417
418 if (m_mode == New )
419 m_editing.insert( newDialogRecord( rec ), tid );
420 else{
421 m_controler->setTransactionID( tid );
422 static_cast<Dialog*>( queuedDialog()->centerDialog() )->setRecord( rec );
423 queuedDialog()->setRecord( m_transactions.count(), m_transactions.count() );
424 }
425 }
426 return tid;
427}
428
429/**
430 * The goal of this helper is to help you to create non blocking
431 * GUIs. In the example of the todolist you can have the edit dialog
432 * but still change the priority or completion inline even if you currently
433 * edit the record.
434 * Your Dialog needs to have a Method setData(int,const QVariant& ) which will be called
435 * in these cases.
436 * If you edit anything while a record is edited call this function to merge the
437 * change in. Note if the record is not handled here we will ignore the request
438 *
439 */
440template<class Dialog, class Record, typename Id>
441void OModalHelper<Dialog, Record, Id>::edited( Id id, int what, const QVariant& data ) {
442 int tid;
443 if (!( tid = transactionID( id ) ) )
444 return;
445
446 if (m_mode == New ) {
447 for (DialogMap::Iterator it= m_editing.begin(); it != m_editing.end(); ++it )
448 if ( it.data() == tid )
449 it.key()->setData( what, data );
450 }else{
451 int po = pos( tid );
452 Dialog* dia = static_cast<Dialog*>( queuedDialog()->centerDialog() );
453 dia->setRecord( m_ids[id] );
454 dia->setData( what, data );
455 queuedDialog()->setRecord( pos, m_transactions.count() );
456 }
457}
458
459/**
460 * This functions either returns the unedited record the done record
461 * or a new empty Record using Record().
462 * If a done record is retrieved all traces are removed inside this class. This
463 * is what was called popping a record. This means when you call this function
464 * with the same TransactionID an Empty record is retrieved.
465 *
466 */
467template<class Dialog, class Record, typename Id>
468Record OModalHelper<Dialog, Record, Id>::record( TransactionID tid)const {
469 if (m_transactions.contains( tid ) )
470 return m_ids[ m_transactions[tid] ];
471 else if (m_done.contains( tid ) ) {
472 Record rec = m_doneIds[ m_done[ tid] ];
473 m_doneIds.remove( m_done[ tid ] );
474 m_done.remove( tid );
475 return rec;
476 }else
477 return Record();
478}
479
480/**
481 * Returns all done Records and removes all references to them internally. A 2nd call to this will
482 * only contain done record that where edited past the point
483 */
484template<class Dialog, class Record, typename Id>
485OModalHelper<Dialog,Record,Id>::RecordList OModalHelper<Dialog, Record, Id>::recordsDone()const {
486 RecordList list;
487
488 for (IdMap::ConstIterator it = m_doneIds.begin(); it != m_doneIds.end(); ++it )
489 list.append( it.data() );
490
491 /* clean up */
492 m_done.clear();
493 m_doneIds.clear();
494
495 return list;
496}
497
498
499/**
500 * @internal
501 */
502template<class Dialog, class Record, typename Id>
503void OModalHelper<Dialog, Record, Id>::done( int status, TransactionID tid) {
504/* If we're in New mode the transaction Id does not count */
505 Record rec;
506
507 if (m_mode == New ) {
508 Dialog *dia = static_cast<Dialog*>( m_controler->dialog() );
509 m_controler->setTransactionID( 0 ); // set the internal dialog to 0l again
510 tid = m_editing[ dia ];
511 m_editing.remove( dia );
512 rec = dia->record();
513 delete dia;
514 }else
515 rec = queuedDialog()->record();
516
517 Id id = m_transactions[ tid ];
518 if (result == QDialog::Accept ) {
519 m_doneIds.insert( is, rec );
520 m_done.insert( tid, id );
521 }
522
523 m_transactions.remove( tid );
524 m_ids.remove( id );
525
526
527 if (status == QDialog::Accept )
528 emit m_signal->accepted( tid );
529 else
530 emit m_signal->rejected( tid );
531
532 emit m_signal->done( result, tid );
533
534 next( 0 );
535}
536
537/**
538 * @internal
539 */
540template<class Dialog, class Record, typename Id>
541void OModalHelper<Dialog, Record, Id>::next( TransactionID tid) {
542 if (m_mode == New )
543 return;
544
545 if (! (m_transactions.count() ) ) {
546 m_controler->setTransactionID( 0 );
547 queuedDialog()->setRecord( 0, 0 );
548 return;
549 }
550
551 int next;
552 Record rec;
553
554 /* save the maybe edited record before switching */
555 Dialog *dia = static_cast<Dialog*>( queuedDialog()->centerDialog() );
556 rec = dia->record();
557 m_ids.replace( m_transactions[tid], rec );
558
559 rec = nextRecord( tid, next );
560 queuedDialog()->setRecord( next, m_transactions.count() );
561 dia->setRecord( rec );
562
563 m_controler->setTransactionID( tid ); // was changed during the next call
564}
565
566/**
567 * @internal
568 */
569/*
570 * code duplication should create a template fcuntion
571 * which takes a pointer to a function ( next, prev ) function
572 */
573template<class Dialog, class Record, typename Id>
574void OModalHelper<Dialog, Record, Id>::prev( TransactionID tid ) {
575 if (m_mode == New )
576 return;
577
578 if (! (m_transactions.count()) ) {
579 m_controler->setTransactionID( 0 );
580 queuedDialog()->setRecord( 0, 0 );
581 return;
582 }
583
584 int prev;
585 Record rec;
586
587 /* save the maybe edited record before switching */
588 Dialog *dia = static_cast<Dialog*>( queuedDialog()->centerDialog() );
589 rec = dia->record();
590 m_ids.replace( m_transactions[tid], rec );
591
592 rec = prevRecord( tid, prev );
593 queuedDialog()->setRecord( prev, m_transactions.count() );
594 dia->setRecord( rec );
595
596 m_controler->setTransactionID( tid ); // was changed during the next call
597}
598
599/**
600 * @internal
601 */
602template<class Dialog, class Record, typename Id>
603Record OModalHelper<Dialog, Record, Id>::nextRecord( TransactionID &tid, int &po ) {
604 /* if tid is == 0 we will take the first one */
605 /* pos starts at 1 here */
606 /* we know we're only called if there are records */
607 Record rec;
608 TransactionMap::Iterator it;
609 if (!tid ) {
610 po = 1;
611 TransactionMap::Iterator it = m_transactions.begin();
612 }else{
613 po = pos( tid );
614 /* if it is the last take the first as next */
615 if ( po == m_transactions.count() ) {
616 po = 1;
617 it = m_transactions.begin();
618 }else {
619 /* we know we're not the last and there is one after us */
620 it = m_transactions.find( tid );
621 ++it; ++po;
622 }
623 }
624
625 tid = it.key();
626 rec = m_ids[ tid ];
627 return rec;
628}
629
630/**
631 * @internal
632 */
633template<class Dialog, class Record, typename Id>
634Record OModalHelper<Dialog, Record, Id>::prevRecord( TransactionID& tid, int& pos ) {
635 /* if tid is == 0 we will take the first one */
636 /* pos starts at 1 here */
637 /* we know we're only called if there are records */
638 Record rec;
639 TransactionMap::Iterator it;
640 if (!tid ) {
641 po = 1;
642 TransactionMap::Iterator it = m_transactions.begin();
643 }else{
644 po = pos( tid );
645 /* if it is the last take the first as next */
646 if ( po == 1 ) {
647 po = m_transactions.count();
648 it = m_transactions.end();
649 --it;
650 }else {
651 /* we know we're not the first and there is one before us */
652 it = m_transactions.find( tid );
653 --it; --po;
654 }
655 }
656
657 tid = it.key();
658 rec = m_ids[ tid ];
659 return rec;
660}
661
662/**
663 * @internal
664 */
665template<class Dialog, class Record, typename Id>
666int OModalHelper<Dialog, Record, Id>::pos( TransactionID id)const {
667 int i = 1;
668 for ( TransactionMap::ConstIterator it = m_transactions.begin(); it != m_transactions.end(); ++it, i++ )
669 if ( it.key() == id )
670 return i;
671
672
673 return 0;
674}
675
676/**
677 * @internal
678 */
679template<class Dialog, class Record, typename Id>
680Dialog* OModalHelper<Dialog, Record, Id>::newDialogRecord( const Record& rec ) {
681 Dialog* dia = new Dialog;
682 dia->setRecord( rec );
683 dia->setDisabled( m_disabled );
684
685 QObject::connect(dia, SIGNAL(done(int) ),
686 m_controler, SLOT(done(int) ) );
687
688 /* FIXME big screen QPEApplication needs fixed*/
689 dia->show();
690}
691
692template<class Record, class Dialog, typename Id>
693OModalHelperDialog* OModalHelper<Record, Dialog, Id>::queuedDialog()const{
694 if (!m_dialog ) {
695 m_dialog = new OModalHelperDialog;
696 m_dialog->setEnabled( m_disabled );
697
698 QObject::connect(m_dialog, SIGNAL(done(int) ),
699 m_controler, SLOT(done(int) ) );
700 QObject::connect(m_dialog, SIGNAL(next() ),
701 m_controler, SLOT(next() ) );
702 QObject::connect(m_dialog, SIGNAL(prev() ),
703 m_controler, SLOT(prev() ) );
704 }
705 return m_dialog;
706}
707
708#endif
diff --git a/libopie/big-screen/osplitter.cpp b/libopie/big-screen/osplitter.cpp
deleted file mode 100644
index 0c9ed6c..0000000
--- a/libopie/big-screen/osplitter.cpp
+++ b/dev/null
@@ -1,583 +0,0 @@
1/*
2               =. This file is part of the OPIE Project
3             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
4           .>+-=
5 _;:,     .>    :=|. This library is free software; you can
6.> <`_,   >  .   <= redistribute it and/or modify it under
7:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
8.="- .-=="i,     .._ License as published by the Free Software
9 - .   .-<_>     .<> Foundation; either version 2 of the License,
10     ._= =}       : or (at your option) any later version.
11    .%`+i>       _;_.
12    .i_,=:_.      -<s. This library is distributed in the hope that
13     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
14    : ..    .:,     . . . without even the implied warranty of
15    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
16  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
17..}^=.=       =       ; Library General Public License for more
18++=   -.     .`     .: details.
19 :     =  ...= . :.=-
20 -.   .:....=;==+<; You should have received a copy of the GNU
21  -_. . .   )=.  = Library General Public License along with
22    --        :-=` this library; see the file COPYING.LIB.
23 If not, write to the Free Software Foundation,
24 Inc., 59 Temple Place - Suite 330,
25 Boston, MA 02111-1307, USA.
26
27*/
28
29#include <qvaluelist.h>
30#include <qvbox.h>
31
32#include <opie/otabwidget.h>
33
34#include "osplitter.h"
35
36
37/**
38 *
39 * This is the constructor of OSplitter
40 * You might want to call setSizeChange to tell
41 * OSplitter to change its layout when a specefic
42 * mark was crossed. OSplitter sets a default value.
43 *
44 * You cann add widget with addWidget to the OSplitter.
45 * OSplitter supports also grouping of Splitters where they
46 * can share one OTabBar in small screen mode. This can be used
47 * for email clients like vies but see the example.
48 *
49 * @param orient The orientation wether to layout horizontal or vertical
50 * @param parent The parent of this widget
51 * @param name The name passed on to QObject
52 * @param fl Additional widgets flags passed to QWidget
53 *
54 * @short single c'tor of the OSplitter
55 */
56OSplitter::OSplitter( Orientation orient, QWidget* parent, const char* name, WFlags fl )
57 : QFrame( parent, name, fl )
58{
59 m_orient = orient;
60 m_hbox = 0;
61 m_size_policy = 330;
62 setFontPropagation( AllChildren );
63 setPalettePropagation( AllChildren );
64
65 /* start by default with the tab widget */
66 m_tabWidget = 0;
67 m_parentTab = 0;
68 changeTab();
69
70}
71
72
73/**
74 * Destructor destructs this object and cleans up. All child
75 * widgets will be deleted
76 * @see addWidget
77 */
78OSplitter::~OSplitter() {
79 qWarning("Deleted Splitter");
80 m_splitter.setAutoDelete( true );
81 m_splitter.clear();
82
83 delete m_hbox;
84 delete m_tabWidget;
85}
86
87
88/**
89 * Sets the label for the Splitter. This label will be used
90 * if a parent splitter is arranged as TabWidget but
91 * this splitter is in fullscreen mode. Then a tab with OSplitter::label()
92 * and iconName() gets added.
93 *
94 * @param name The name of the Label
95 */
96void OSplitter::setLabel( const QString& name ) {
97 m_name = name;
98}
99
100/**
101 * @see setLabel but this is for the icon retrieved by Resource
102 *
103 * @param name The name of the icon in example ( "zoom" )
104 */
105void OSplitter::setIconName( const QString& name ) {
106 m_icon = name;
107}
108
109
110/**
111 * returns the iconName
112 * @see setIconName
113 */
114QString OSplitter::iconName()const {
115 return m_icon;
116}
117
118/**
119 * returns the label set with setLabel
120 * @see setLabel
121 */
122QString OSplitter::label()const {
123 return m_name;
124}
125
126/**
127 * This function sets the size change policy of the splitter.
128 * If this size marked is crossed the splitter will relayout.
129 * Note: that depending on the set Orientation it'll either look
130 * at the width or height.
131 * Note: If you want to from side to side view to tabbed view you need
132 * to make sure that the size you supply is not smaller than the minimum
133 * size of your added widgets. Note that if you use widgets like QComboBoxes
134 * you need to teach them to accept smaller sizes as well @see QWidget::setSizePolicy
135 *
136 * @param width_height The mark that will be watched. Interpreted depending on the Orientation of the Splitter.
137 * @return void
138 */
139void OSplitter::setSizeChange( int width_height ) {
140 m_size_policy = width_height;
141 QSize sz(width(), height() );
142 QResizeEvent ev(sz, sz );
143 resizeEvent(&ev);
144}
145
146/**
147 * This functions allows to add another OSplitter and to share
148 * the OTabBar in small screen mode. The ownerships gets transfered.
149 * OSplitters are always added after normal widget items
150 */
151void OSplitter::addWidget( OSplitter* split ) {
152 m_splitter.append( split );
153
154 /*
155 * set tab widget
156 */
157 if (m_tabWidget )
158 setTabWidget( m_parentTab );
159 else{
160 Opie::OSplitterContainer con;
161 con.widget =split;
162 addToBox( con );
163 }
164}
165
166/*
167 * If in a tab it should be removed
168 * and if in a hbox the reparent kills it too
169 */
170/**
171 * This removes the splitter again. You currently need to call this
172 * before you delete or otherwise you can get mem corruption
173 * or other weird behaviour.
174 * Owner ship gets transfered back to you it's current parent
175 * is 0
176 */
177void OSplitter::removeWidget( OSplitter* split) {
178 split->setTabWidget( 0 );
179 split->reparent( 0, 0, QPoint(0, 0) );
180}
181
182/**
183 * Adds a widget to the Splitter. The widgets gets inserted
184 * at the end of either the Box or TabWidget.
185 * Ownership gets transfered and the widgets gets reparented.
186 * Note: icon and label is only available on small screensizes
187 * if size is smaller than the mark
188 * Warning: No null checking of the widget is done. Only on debug
189 * a message will be outputtet
190 *
191 * @param wid The widget which will be added
192 * @param icon The icon of the possible Tab
193 * @param label The label of the possible Tab
194 */
195void OSplitter::addWidget( QWidget* wid, const QString& icon, const QString& label ) {
196#ifdef DEBUG
197 if (!wid ) {
198 qWarning("Widget is not valid!");
199 return;
200 }
201#endif
202 Opie::OSplitterContainer cont;
203 cont.widget = wid;
204 cont.icon =icon;
205 cont.name = label;
206
207 m_container.append( cont );
208
209 /*
210 *
211 */
212 if (!m_splitter.isEmpty() && (m_tabWidget || m_parentTab ) )
213 setTabWidget( m_parentTab );
214 else {
215 if (m_hbox )
216 addToBox( cont );
217 else
218 addToTab( cont );
219 }
220}
221
222
223/**
224 * Removes the widget from the tab widgets if necessary.
225 * OSplitter drops ownership of this widget and the widget
226 * will be reparented i tto 0.
227 * The widget will not be deleted.
228 *
229 * @param w The widget to be removed
230 */
231void OSplitter::removeWidget( QWidget* w) {
232 ContainerList::Iterator it;
233 for ( it = m_container.begin(); it != m_container.end(); ++it )
234 if ( (*it).widget == w )
235 break;
236
237 if (it == m_container.end() )
238 return;
239
240
241 /* only tab needs to be removed.. box recognizes it */
242 if ( !m_hbox )
243 removeFromTab( w );
244
245
246 /* Find reparent it and remove it from our list */
247
248 w->reparent( 0, 0, QPoint(0, 0));
249 it = m_container.remove( it );
250
251}
252
253
254/**
255 * This method will give focus to the widget. If in a tabwidget
256 * the tabbar will be changed
257 *
258 * @param w The widget which will be set the current one
259 */
260void OSplitter::setCurrentWidget( QWidget* w) {
261 if (m_tabWidget )
262 m_tabWidget->setCurrentTab( w );
263// else
264 // m_hbox->setFocus( w );
265
266}
267
268/**
269 * This is an overloaded member function and only differs in the
270 * argument it takes.
271 * Searches list of widgets for label. It'll pick the first label it finds
272 *
273 * @param label Label to look for. First match will be taken
274 */
275void OSplitter::setCurrentWidget( const QString& label ) {
276 ContainerList::Iterator it;
277 for (it = m_container.begin(); it != m_container.end(); ++it ) {
278 if ( (*it).name == label ) {
279 setCurrentWidget( (*it).widget );
280 break;
281 }
282 }
283}
284
285/**
286 * This will only work when the TabWidget is active
287 * If everything is visible this signal is kindly ignored
288 * @see OTabWidget::setCurrentTab(int)
289 *
290 * @param tab The tab to make current
291 */
292void OSplitter::setCurrentWidget( int tab ) {
293 if (m_tabWidget )
294 m_tabWidget->setCurrentTab( tab );
295}
296
297/**
298 * return the currently activated widget if in tab widget mode
299 * or null because all widgets are visible
300 */
301QWidget* OSplitter::currentWidget() const{
302 if (m_tabWidget)
303 return m_tabWidget->currentWidget();
304 else if (m_parentTab )
305 return m_parentTab->currentWidget();
306
307 return 0l;
308}
309/* wrong */
310#if 0
311/**
312 * @reimplented for internal reasons
313 * returns the sizeHint of one of its sub widgets
314 */
315QSize OSplitter::sizeHint()const {
316 if (m_parentTab )
317 return QFrame::sizeHint();
318
319 if (m_hbox )
320 return m_hbox->sizeHint();
321 else
322 return m_tabWidget->sizeHint();
323}
324
325QSize OSplitter::minimumSizeHint()const {
326 if (m_parentTab )
327 return QFrame::minimumSizeHint();
328 if (m_hbox)
329 return m_hbox->sizeHint();
330 else
331 return m_tabWidget->sizeHint();
332}
333#endif
334
335/**
336 * @reimplemented for internal reasons
337 */
338void OSplitter::resizeEvent( QResizeEvent* res ) {
339 QFrame::resizeEvent( res );
340 /*
341 *
342 */
343// qWarning("Old size was width = %d height = %d", res->oldSize().width(), res->oldSize().height() );
344 bool mode = true;
345 qWarning("New size is width = %d height = %d %s", res->size().width(), res->size().height(), name() );
346 if ( res->size().width() > m_size_policy &&
347 m_orient == Horizontal ) {
348 changeHBox();
349 mode = false;
350 }else if ( (res->size().width() <= m_size_policy &&
351 m_orient == Horizontal ) ||
352 (res->size().height() <= m_size_policy &&
353 m_orient == Vertical ) ) {
354 changeTab();
355 }else if ( res->size().height() > m_size_policy &&
356 m_orient == Vertical ) {
357 qWarning("Changng to vbox %s", name() );
358 changeVBox();
359 mode = false;
360 }
361
362 emit sizeChanged(mode, m_orient );
363}
364
365/*
366 * Adds a container to a tab either the parent tab
367 * or our own
368 */
369void OSplitter::addToTab( const Opie::OSplitterContainer& con ) {
370 QWidget *wid = con.widget;
371// not needed widgetstack will reparent as well wid.reparent(m_tabWidget, wid->getWFlags(), QPoint(0, 0) );
372 if (m_parentTab )
373 m_parentTab->addTab( wid, con.icon, con.name );
374 else
375 m_tabWidget->addTab( wid, con.icon, con.name );
376}
377
378
379/*
380 * adds a container to the box
381 */
382void OSplitter::addToBox( const Opie::OSplitterContainer& con ) {
383 QWidget* wid = con.widget;
384 wid->reparent(m_hbox, 0, QPoint(0, 0) );
385}
386
387
388/*
389 * Removes a widget from the tab
390 */
391void OSplitter::removeFromTab( QWidget* wid ) {
392 if (m_parentTab )
393 m_parentTab->removePage( wid );
394 else
395 m_tabWidget->removePage( wid );
396}
397
398/*
399 * switches over to a OTabWidget layout
400 * it is recursive
401 */
402void OSplitter::changeTab() {
403 /* if we're the owner of the tab widget */
404 if (m_tabWidget ) {
405 raise();
406 show();
407 m_tabWidget->setGeometry( frameRect() );
408 return;
409 }
410
411 qWarning(" New Tab Widget %s", name() );
412 /*
413 * and add all widgets this will reparent them
414 * delete m_hbox set it to 0
415 *
416 */
417 OTabWidget *tab;
418 if ( m_parentTab ) {
419 hide();
420 tab = m_parentTab;
421 /* expensive but needed cause we're called from setTabWidget and resizeEvent*/
422 if (!m_container.isEmpty() ) {
423 ContainerList::Iterator it = m_container.begin();
424 for (; it != m_container.end(); ++it )
425 m_parentTab->removePage( (*it).widget );
426 }
427 }else
428 tab = m_tabWidget = new OTabWidget( this );
429
430 connect(tab, SIGNAL(currentChanged(QWidget*) ),
431 this, SIGNAL(currentChanged(QWidget*) ) );
432
433 for ( ContainerList::Iterator it = m_container.begin(); it != m_container.end(); ++it ) {
434 qWarning("Widget is %s", (*it).name.latin1() );
435 addToTab( (*it) );
436 }
437
438 for ( OSplitter* split = m_splitter.first(); split; split = m_splitter.next() ) {
439 split->reparent(this, 0, QPoint(0, 0) );
440 split->setTabWidget( tab );
441 }
442
443
444 delete m_hbox;
445 m_hbox = 0;
446 if (!m_tabWidget )
447 return;
448
449 m_tabWidget->setGeometry( frameRect() );
450 m_tabWidget->show();
451
452}
453
454/*
455 * changes over to a box
456 * this is recursive as well
457 */
458void OSplitter::changeHBox() {
459 if (m_hbox ) {
460 m_hbox->setGeometry( frameRect() );
461 return;
462 }
463
464 qWarning("new HBox %s", name() );
465 m_hbox = new QHBox( this );
466 commonChangeBox();
467}
468
469void OSplitter::changeVBox() {
470 if (m_hbox ) {
471 m_hbox->setGeometry( frameRect() );
472 return;
473 }
474
475 qWarning("New VBOX %s", name() );
476 m_hbox = new QVBox( this );
477
478 commonChangeBox();
479
480}
481
482/*
483 * common box code
484 * first remove and add children
485 * the other splitters
486 * it is recursive as well due the call to setTabWidget
487 */
488void OSplitter::commonChangeBox() {
489 qWarning(" Name of Splitters is %s", name() );
490
491 for (ContainerList::Iterator it = m_container.begin(); it != m_container.end(); ++it ) {
492 /* only if parent tab.. m_tabWidgets gets deleted and would do that as well */
493 if (m_parentTab )
494 removeFromTab( (*it).widget );
495 qWarning("Adding to box %s", (*it).name.latin1() );
496 addToBox( (*it) );
497 }
498 for ( OSplitter* split = m_splitter.first(); split; split = m_splitter.next() ) {
499 /* tell them the world had changed */
500 split->setTabWidget( 0 );
501 Opie::OSplitterContainer con;
502 con.widget = split;
503// con.widget = split->m_tabWidget ? static_cast<QWidget*>(split->m_tabWidget)
504// : static_cast<QWidget*>(split->m_hbox);
505 addToBox( con );
506 }
507
508
509
510 if (m_parentTab )
511 m_parentTab->addTab(m_hbox, iconName(), label() );
512 else {
513 qWarning(" setting Box geometry for %s", name() );
514 m_hbox->setGeometry( frameRect() );
515 m_hbox->show();
516 delete m_tabWidget;
517 m_tabWidget = 0;
518 show(); // also show this widget
519 }
520}
521
522/*
523 * sets the tabwidget, removes tabs, and relayouts the widget
524 */
525void OSplitter::setTabWidget( OTabWidget* wid) {
526 /* clean up cause m_parentTab will not be available for us */
527 if ( m_parentTab ) {
528 if (m_hbox )
529 m_parentTab->removePage( m_hbox );
530 else if (!m_container.isEmpty() ){
531 ContainerList::Iterator it = m_container.begin();
532 for ( ; it != m_container.end(); ++it )
533 m_parentTab->removePage( (*it).widget );
534 }
535 }
536 /* the parent Splitter changed so either make us indepent or dep */
537
538 m_parentTab = wid;
539
540 QWidget *tab = m_tabWidget;
541 QWidget *box = m_hbox;
542 m_hbox = 0; m_tabWidget = 0;
543
544 if ( layoutMode() )
545 changeTab();
546 else if (m_orient == Horizontal )
547 changeHBox();
548 else
549 changeVBox();
550
551 /* our own crap is added and children from change* */
552 delete tab;
553 delete box;
554}
555
556
557#if 0
558void OSplitter::reparentAll() {
559 if (m_container.isEmpty() )
560 return;
561
562 ContainerList::Iterator it = m_container.begin();
563 for ( ; it != m_container.end(); ++it )
564 (*it).wid->reparent(0, 0, QPoint(0, 0) );
565
566
567}
568#endif
569
570/**
571 * @internal
572 */
573bool OSplitter::layoutMode()const {
574 if ( size().width() > m_size_policy &&
575 m_orient == Horizontal ) {
576 return false;
577 }else if ( size().height() > m_size_policy &&
578 m_orient == Vertical ) {
579 return false;
580 }
581
582 return true;
583}
diff --git a/libopie/big-screen/osplitter.h b/libopie/big-screen/osplitter.h
deleted file mode 100644
index 61a247b..0000000
--- a/libopie/big-screen/osplitter.h
+++ b/dev/null
@@ -1,146 +0,0 @@
1/*
2               =. This file is part of the OPIE Project
3             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
4           .>+-=
5 _;:,     .>    :=|. This library is free software; you can
6.> <`_,   >  .   <= redistribute it and/or modify it under
7:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
8.="- .-=="i,     .._ License as published by the Free Software
9 - .   .-<_>     .<> Foundation; either version 2 of the License,
10     ._= =}       : or (at your option) any later version.
11    .%`+i>       _;_.
12    .i_,=:_.      -<s. This library is distributed in the hope that
13     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
14    : ..    .:,     . . . without even the implied warranty of
15    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
16  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
17..}^=.=       =       ; Library General Public License for more
18++=   -.     .`     .: details.
19 :     =  ...= . :.=-
20 -.   .:....=;==+<; You should have received a copy of the GNU
21  -_. . .   )=.  = Library General Public License along with
22    --        :-=` this library; see the file COPYING.LIB.
23 If not, write to the Free Software Foundation,
24 Inc., 59 Temple Place - Suite 330,
25 Boston, MA 02111-1307, USA.
26
27*/
28
29#ifndef OPIE_SPLITTER_H
30#define OPIE_SPLITTER_H
31
32#include <qstring.h>
33
34#include <qframe.h>
35#include <qvaluelist.h>
36#include <qlist.h>
37
38#include "obigscreen_p.h"
39
40/* forward declarations */
41class OTabWidget;
42class QHBox;
43//template class QValueList<Opie::OSplitterContainer>;
44
45/*
46 * TODO
47 * -check API docu
48 * -one more example
49 * -allow inserting at a position
50 */
51
52/**
53 *
54 * If you've widgets that could be placed side by side but you think
55 * on small resolutions is not enough place but it would really make sense
56 * on bigger resolutions this class will help you.
57 * You can add as many widgets you want to it. Set a poliy on which width/height it
58 * should switch the layout.
59 * You can either say to place widgets vertical or horizontal.
60 * This class uses QHBox, QVBox and QTAbWidget internally.
61 * OSplitter takes ownership of the widgets
62 *
63 * @since 1.2
64 *
65 * @short a small dynamically changing its layout to store two or more widgets side by side
66 * @version 0.1
67 * @author zecke
68 */
69class OSplitter : public QFrame{
70 Q_OBJECT
71public:
72 typedef QValueList<Opie::OSplitterContainer> ContainerList;
73 OSplitter( Qt::Orientation = Horizontal, QWidget *parent = 0,
74 const char* name = 0, WFlags fl = 0 );
75 ~OSplitter();
76
77 void setLabel( const QString& name );
78 void setIconName( const QString& name );
79 QString label()const;
80 QString iconName()const;
81
82 void setSizeChange( int width_height );
83
84 void addWidget( OSplitter* splitter );
85 void addWidget( QWidget* wid, const QString& icon, const QString& label );
86 void removeWidget( QWidget* );
87 void removeWidget( OSplitter* );
88
89 void setCurrentWidget( QWidget* );
90 void setCurrentWidget( const QString& label );
91 void setCurrentWidget( int );
92 QWidget* currentWidget()const;
93
94
95signals:
96 /**
97 * Emitted if in tab and comes directly from the tab widget
98 *
99 */
100 void currentChanged( QWidget* );
101
102 /**
103 * emitted whenever a border is crossed
104 * true if in small screen mode
105 * false if in bigscreen
106 * this signal is emitted after the layout switch
107 * @param b The layout mode
108 * @param ori The orientation
109 */
110 void sizeChanged( bool b, Orientation ori);
111public:
112// QSize sizeHint()const;
113// QSize minimumSizeHint()const;
114
115protected:
116 void resizeEvent( QResizeEvent* );
117
118private:
119 /* true if OTabMode */
120 bool layoutMode()const;
121// void reparentAll();
122 void setTabWidget( OTabWidget*);
123 void addToTab( const Opie::OSplitterContainer& );
124 void addToBox( const Opie::OSplitterContainer& );
125 void removeFromTab( QWidget* );
126 void changeTab();
127 void changeHBox();
128 void changeVBox();
129 void commonChangeBox();
130 QHBox *m_hbox;
131 OTabWidget *m_tabWidget;
132 OTabWidget *m_parentTab;
133 Orientation m_orient;
134 int m_size_policy;
135
136 ContainerList m_container;
137 QList<OSplitter> m_splitter;
138
139 QString m_icon, m_name;
140
141 struct Private;
142 Private *d;
143};
144
145
146#endif
diff --git a/libopie/big-screen/owidgetstack.cpp b/libopie/big-screen/owidgetstack.cpp
deleted file mode 100644
index 967c54b..0000000
--- a/libopie/big-screen/owidgetstack.cpp
+++ b/dev/null
@@ -1,404 +0,0 @@
1#include <qapplication.h>
2#include <qwidgetstack.h>
3
4#include "owidgetstack.h"
5
6namespace {
7 const int mode_size = 330;
8}
9
10/**
11 * This is the standard widget. For simple usage see the example. Normally this widget
12 * is the central widget of a QMainWindow.
13 * Use removeWidget before you delete a widget yourself. OWidgetStack does not
14 * yet recognize removal of children.
15 *
16 * @param parent The parent widget. It maybe 0 but then you need to take care of deletion.
17 * Or you use QPEApplication::showMainWidget().
18 * @param name Name will be passed on to QObject
19 * @param fl Additional window flags passed to QFrame. see @Qt::WFlags
20 */
21OWidgetStack::OWidgetStack( QWidget* parent, const char* name, WFlags fl)
22 : QFrame( parent, name, fl )
23{
24 m_last = m_mWidget = 0;
25 m_forced = false;
26
27 QApplication::desktop()->installEventFilter( this );
28 setFontPropagation ( AllChildren );
29 setPalettePropagation( AllChildren );
30
31 /* sets m_mode and initializes more */
32 /* if you change this call change switchTop as well */
33 m_stack = 0;
34 switchStack();
35}
36
37/**
38 * The destructor. It deletes also all added widgets.
39 *
40 */
41OWidgetStack::~OWidgetStack() {
42 if (m_mode == BigScreen && !m_list.isEmpty() ) {
43 QMap<int, QWidget*>::Iterator it = m_list.begin();
44 for ( ; it != m_list.end(); ++it )
45 delete it.data();
46 }
47 m_list.clear();
48
49}
50
51/**
52 * return the mode of the desktop. There are currently two modes. SmallScreen
53 * with a normal PDA resolution and BigScreen with resolutions greater than
54 * 330 for width and height.
55 * You can also force the mode this widget is in with forceMode()
56 * Note that NoForce will be never returned from here
57 */
58enum OWidgetStack::Mode OWidgetStack::mode()const {
59 return m_mode;
60}
61
62/**
63 * You can also force one of the modes and then
64 * this widget stops on listening to size changes. You
65 * can revert to the scanning behaviour by setting mode
66 * to NoForce
67 */
68void OWidgetStack::forceMode( enum Mode mode) {
69 m_forced = mode != NoForce;
70
71 /* we need to see which mode we're in */
72 if (!m_forced ) {
73 if ( QApplication::desktop()->width() >=
74 mode_size )
75 mode = BigScreen;
76 else
77 mode = SmallScreen;
78 }
79 switch( mode ) {
80 case NoForce:
81 case SmallScreen:
82 switchStack();
83 break;
84 case BigScreen:
85 switchTop();
86 break;
87
88 }
89
90 m_mode = mode;
91}
92
93/**
94 * Adds a widget to the stack. The first widget added is considered
95 * to be the mainwindow. This is important because if Opie is in
96 * BigScreen mode the sizeHint of the MainWindow will be returned.
97 * In Small Screen the sizeHint of the QWidgetStack is returned.
98 * See QWidgetStack::sizeHint.
99 * This widget takes ownership of the widget and may even reparent.
100 * All windows will be hidden
101 *
102 * @param wid The QWidget to be added
103 * @param id An ID for the Widget. If the ID is duplicated the
104 last set widget will be related to the id
105 *
106 */
107void OWidgetStack::addWidget( QWidget* wid, int id) {
108 if (!wid)
109 return;
110
111 /* set our main widget */
112 if (!m_mWidget)
113 m_mWidget = wid;
114
115 m_list.insert( id, wid );
116
117 /**
118 * adding does not raise any widget
119 * But for our mainwidget we prepare
120 * the right position with the right parent
121 */
122 if (m_mode == SmallScreen )
123 m_stack->addWidget( wid,id );
124 else if ( m_mWidget == wid ) {
125 wid->reparent(this, 0, contentsRect().topLeft() );
126 wid->hide();
127 }else {
128 wid->reparent(0, WType_TopLevel, QPoint(10, 10) );
129 wid->hide();
130 }
131}
132
133
134/**
135 * Remove the widget from the stack it'll be reparented to 0
136 * and ownership is dropped. You need to delete it.
137 * If the removed widget was the mainwindow consider
138 * to call setMainWindow.
139 *
140 * @param wid The QWidget to be removed
141 */
142void OWidgetStack::removeWidget( QWidget* wid) {
143 if (!wid)
144 return;
145
146 if (m_mode == SmallScreen )
147 m_stack->removeWidget( wid );
148
149
150 wid->reparent(0, 0, QPoint(0, 0) );
151 m_list.remove( id(wid) );
152
153 if ( wid == m_mWidget )
154 m_mWidget = 0;
155}
156
157#if 0
158/**
159 * @internal_resons
160 */
161QSizeHint OWidgetStack::sizeHint()const {
162
163}
164
165/**
166 * @internal_reasons
167 */
168QSizeHint OWidgetStack::minimumSizeHint()const {
169
170}
171#endif
172
173/**
174 * This function tries to find the widget with the id.
175 * You supplied a possible id in addWIdget. Note that not
176 * QWidget::winId() is used.
177 *
178 * @param id The id to search for
179 *
180 * @return The widget or null
181 * @see addWidget
182 */
183QWidget* OWidgetStack::widget( int id) const {
184 return m_list[id];
185}
186
187/**
188 * Tries to find the assigned id for the widget
189 * or returns -1 if no widget could be found
190 * @param wid The widget to look for
191 */
192int OWidgetStack::id( QWidget* wid)const{
193 if (m_list.isEmpty() )
194 return -1;
195
196 QMap<int, QWidget*>::ConstIterator it = m_list.begin();
197 for ( ; it != m_list.end(); ++it )
198 if ( it.data() == wid )
199 break;
200
201 /* if not at the end return the key */
202 return it == m_list.end() ? -1 : it.key();
203}
204
205
206/**
207 * This function returns the currently visible
208 * widget. In BigScreen mode the mainwindow
209 * is returned
210 */
211QWidget* OWidgetStack::visibleWidget()const {
212 if (m_mode == SmallScreen )
213 return m_stack->visibleWidget();
214 else
215 return m_mWidget;
216
217}
218
219/**
220 * This method raises the widget wit the specefic id.
221 * Note that in BigScreen mode the widget is made visible
222 * but the other ( previous) visible widget(s) will not
223 * be made invisible. If you need this use hideWidget().
224 *
225 * @param id Raise the widget with id
226 */
227void OWidgetStack::raiseWidget( int id) {
228 return raiseWidget( widget( id ) );
229}
230
231/**
232 * This is an overloaded function and only differs in its parameters.
233 * @see raiseWidget( int )
234 */
235void OWidgetStack::raiseWidget( QWidget* wid) {
236 m_last = wid;
237 if (m_mode == SmallScreen )
238 m_stack->raiseWidget( wid );
239 else {
240 int ide;
241 emit aboutToShow( wid );
242 /* if someone is connected and the widget is actually available */
243 if ( receivers( SIGNAL(aboutToShow(int) ) ) &&
244 ( (ide = id( wid ) ) != -1 ) )
245 emit aboutToShow( ide );
246
247 /* ### FIXME PLACE THE WIDGET right */
248 wid->show();
249 }
250}
251
252/**
253 * This will hide the currently visible widget
254 * and raise the widget specified by the parameter.
255 * Note that this method does not use visibleWIdget but remembers
256 * the last raisedWidget
257 */
258void OWidgetStack::hideWidget( int id) {
259 /* hiding our main widget wouldn't be smart */
260 if ( m_mode == BigScreen && m_last != m_mWidget )
261 m_last->hide();
262 raiseWidget( id );
263}
264
265/**
266 * This is overloaded and only differs in the parameters
267 * it takes.
268 */
269void OWidgetStack::hideWidget( QWidget* wid) {
270 /* still not smart */
271 if ( m_mode == BigScreen && m_last != m_mWidget )
272 m_last->hide();
273
274 raiseWidget( wid );
275}
276
277
278bool OWidgetStack::eventFilter( QObject* obj, QEvent* e) {
279 qWarning(" %s %s", obj->name(), obj->className() );
280 if ( e->type() == QEvent::Resize ) {
281 QResizeEvent *res = static_cast<QResizeEvent*>( e );
282 QSize size = res->size();
283 if ( size.width() >= mode_size )
284 switchTop();
285 else
286 switchStack();
287 }
288 return false;
289}
290
291
292/**
293 * @internal_resons
294 */
295void OWidgetStack::resizeEvent( QResizeEvent* ev ) {
296 QFrame::resizeEvent( ev );
297 if (m_mode == SmallScreen )
298 m_stack->setGeometry( frameRect() );
299 else
300 if (m_mWidget )
301 m_mWidget->setGeometry( frameRect() );
302
303}
304
305/**
306 * setMainWindow gives the OWidgetStack a hint which
307 * window should always stay inside the stack.
308 * Normally the first added widget is considered to be
309 * the mainwindow but you can change this with this
310 * function.
311 * If in BigScreen mode the current mainwindow will be reparented
312 * and hidden. The position will be taken by the new one.
313 * If the old MainWindow was hidden the new window will
314 * also be hidden. If the window was visible the new mainwindow
315 * will be made visible too and the old one hidden. If there
316 * was no mainwindow it will be hidden as well.
317 *
318 * @param wid The new mainwindow
319 */
320void OWidgetStack::setMainWindow( QWidget* wid ) {
321 if (m_mode == BigScreen ) {
322 bool wasVisible = false;
323 if (m_mWidget ) {
324 wasVisible = !m_mWidget->isHidden();
325 /* hidden by default */
326 m_mWidget->reparent(0, WType_TopLevel, QPoint(10, 10) );
327 }
328 wid->reparent(this, 0, frameRect().topLeft() );
329
330 if (wasVisible)
331 wid->show();
332 }
333
334 m_mWidget = wid;
335}
336
337/**
338 * this is an overloaded member and only differs
339 * in the type of arguments.
340 * @see setMainWindow(QWidget*)
341 */
342void OWidgetStack::setMainWindow( int id) {
343 setMainWindow( widget( id ) );
344}
345
346
347/*
348 * this function switches to a stack ;)
349 */
350void OWidgetStack::switchStack() {
351 if (m_stack ) {
352 m_stack->setGeometry( frameRect() );
353 return;
354 }
355
356 m_mode = SmallScreen;
357 m_stack = new QWidgetStack(this);
358
359 connect(m_stack, SIGNAL(aboutToShow(QWidget*) ),
360 this, SIGNAL(aboutToShow(QWidget*) ) );
361 connect(m_stack, SIGNAL(aboutToShow(int) ),
362 this, SIGNAL(aboutToShow(int) ) );
363
364 /* now reparent the widgets... luckily QWidgetSatck does most of the work */
365 if (m_list.isEmpty() )
366 return;
367
368 QMap<int, QWidget*>::Iterator it = m_list.begin();
369 for ( ; it != m_list.end(); ++it )
370 m_stack->addWidget( it.data(), it.key() );
371
372
373}
374
375/*
376 * we will switch to top level mode
377 * reparent the list of widgets and then delete the stack
378 */
379void OWidgetStack::switchTop() {
380 m_mode = BigScreen;
381 /* this works because it is guaranteed that switchStack was called at least once*/
382 if (!m_stack && m_mWidget) {
383 m_mWidget->setGeometry( frameRect() );
384 return;
385 }else if (!m_stack)
386 return;
387
388 if (!m_list.isEmpty() ) {
389 QMap<int, QWidget*>::Iterator it = m_list.begin();
390 for ( ; it != m_list.end(); ++it ) {
391 /* better than reparenting twice */
392 if ( it.data() == m_mWidget ) {
393 m_mWidget->reparent(this, 0, frameRect().topLeft() );
394 m_mWidget->setGeometry( frameRect() );
395 m_mWidget->show();
396 }else
397 /* ### FIXME we need to place the widget better */
398 it.data()->reparent(0, WType_TopLevel, QPoint(10, 10) );
399 }
400 }
401
402 delete m_stack;
403 m_stack = 0;
404}
diff --git a/libopie/big-screen/owidgetstack.h b/libopie/big-screen/owidgetstack.h
deleted file mode 100644
index 5179213..0000000
--- a/libopie/big-screen/owidgetstack.h
+++ b/dev/null
@@ -1,127 +0,0 @@
1/*
2               =. This file is part of the OPIE Project
3             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
4           .>+-=
5 _;:,     .>    :=|. This library is free software; you can
6.> <`_,   >  .   <= redistribute it and/or modify it under
7:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
8.="- .-=="i,     .._ License as published by the Free Software
9 - .   .-<_>     .<> Foundation; either version 2 of the License,
10     ._= =}       : or (at your option) any later version.
11    .%`+i>       _;_.
12    .i_,=:_.      -<s. This library is distributed in the hope that
13     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
14    : ..    .:,     . . . without even the implied warranty of
15    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
16  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
17..}^=.=       =       ; Library General Public License for more
18++=   -.     .`     .: details.
19 :     =  ...= . :.=-
20 -.   .:....=;==+<; You should have received a copy of the GNU
21  -_. . .   )=.  = Library General Public License along with
22    --        :-=` this library; see the file COPYING.LIB.
23 If not, write to the Free Software Foundation,
24 Inc., 59 Temple Place - Suite 330,
25 Boston, MA 02111-1307, USA.
26
27*/
28
29#ifndef OPIE_BIG_WIDGET_STACK_H
30#define OPIE_BIG_WIDGET_STACK_H
31
32#include <qframe.h>
33#include <qmap.h>
34
35class QWidgetStack;
36/**
37 *
38 * OWidgetStack is the answer to the problem of using Opie at different screen
39 * sizes and to have a different behaviour. Most applications use a QWidgetStack
40 * to supply a view on click. And by clicking the (X) you go back but this
41 * behaviour feels strange on bigger screens. It's ok on smaller one because
42 * one can't determine the difference.
43 * This stack reads the default out of the size of the desktop widget but
44 * can be forced to have either the one or the other behaviour.
45 * The first widget added is considered the 'main' widget and its
46 * sizeHint will be taking if in BigScreen mode.
47 * In small screen mode this widget behaves exactly like a QWidgetStack and in BigScreen
48 * mode it'll use the MainWindow as child of this widget and arranges the others as
49 * hidden top level widgets.
50 *
51 * @version 0.1
52 * @author hOlgAr F.
53 * @short Either a true stack or a list of top Level widgets
54 */
55class OWidgetStack : public QFrame {
56 Q_OBJECT
57public:
58 enum Mode { SmallScreen, BigScreen, NoForce };
59 OWidgetStack( QWidget* parent, const char* name = 0, WFlags fl = 0 );
60 ~OWidgetStack();
61
62 enum Mode mode()const;
63 void forceMode( enum Mode );
64
65 void addWidget( QWidget* , int );
66 void removeWidget( QWidget* );
67
68// QSizeHint sizeHint()const;
69// QSizeHint minimumSizeHint()const;
70
71 QWidget *widget( int )const;
72 int id( QWidget* )const;
73
74
75
76 QWidget* visibleWidget() const;
77
78 bool eventFilter( QObject*, QEvent* );
79signals:
80 /**
81 * OWidgetStack monitors the Desktop Widget for
82 * size changes if it recignizes a change size it'll
83 * send a signal and adjust its mode. After the signal
84 * was emitted. During the signal a call to mode() the
85 * old mode will be returned. Note that if a size change happens
86 * but no modeChange no signal will be emitted
87 *
88 *
89 * @param mode The new mode of the desktop
90 */
91 void modeChanged( enum Mode mode);
92
93 /**
94 * These two signals are emitted whenever we're about to
95 * show one of the widgets
96 */
97 void aboutToShow( QWidget* );
98 void aboutToShow( int );
99
100public slots:
101 void raiseWidget( int );
102 void raiseWidget( QWidget* );
103 void hideWidget( int );
104 void hideWidget( QWidget* );
105 void setMainWindow( QWidget* );
106 void setMainWindow( int );
107
108protected:
109 void resizeEvent( QResizeEvent* );
110
111private:
112 void switchStack();
113 void switchTop();
114 QMap<int, QWidget*> m_list;
115 QWidgetStack *m_stack;
116 QWidget *m_mWidget;
117 QWidget *m_last;
118
119 enum Mode m_mode;
120 bool m_forced : 1;
121
122 struct Private;
123 Private *d;
124};
125
126
127#endif
diff --git a/libopie/libopie.pro b/libopie/libopie.pro
index a3d01ab..145743d 100644
--- a/libopie/libopie.pro
+++ b/libopie/libopie.pro
@@ -80,35 +80,34 @@ SOURCES = ofontmenu.cc \
80 pim/opimnotify.cpp \ 80 pim/opimnotify.cpp \
81 pim/opimnotifymanager.cpp \ 81 pim/opimnotifymanager.cpp \
82 pim/opimmainwindow.cpp \ 82 pim/opimmainwindow.cpp \
83 pim/opimresolver.cpp \ 83 pim/opimresolver.cpp \
84 pim/oevent.cpp \ 84 pim/oevent.cpp \
85 pim/otimezone.cpp \ 85 pim/otimezone.cpp \
86 pim/odatebookaccess.cpp \ 86 pim/odatebookaccess.cpp \
87 pim/odatebookaccessbackend.cpp \ 87 pim/odatebookaccessbackend.cpp \
88 pim/odatebookaccessbackend_xml.cpp \ 88 pim/odatebookaccessbackend_xml.cpp \
89 orecurrancewidget.cpp \ 89 orecurrancewidget.cpp \
90 oticker.cpp owait.cpp 90 oticker.cpp owait.cpp
91 91
92TARGET = opie 92TARGET = opie
93INCLUDEPATH += $(OPIEDIR)/include 93INCLUDEPATH += $(OPIEDIR)/include
94DESTDIR = $(OPIEDIR)/lib$(PROJMAK) 94DESTDIR = $(OPIEDIR)/lib$(PROJMAK)
95 95
96LIBS += -lqpe 96LIBS += -lqpe
97 97
98# Add SQL-Support if selected by config (eilers) 98# Add SQL-Support if selected by config (eilers)
99CONFTEST = $$system( echo $CONFIG_SQL_PIM_BACKEND ) 99CONFTEST = $$system( echo $CONFIG_SQL_PIM_BACKEND )
100contains( CONFTEST, y ){ 100contains( CONFTEST, y ){
101 101
102DEFINES += __USE_SQL 102DEFINES += __USE_SQL
103LIBS += -lopiedb2 103LIBS += -lopiedb2
104HEADERS += pim/otodoaccesssql.h pim/ocontactaccessbackend_sql.h pim/odatebookaccessbackend_sql.h 104HEADERS += pim/otodoaccesssql.h pim/ocontactaccessbackend_sql.h pim/odatebookaccessbackend_sql.h
105SOURCES += pim/otodoaccesssql.cpp pim/ocontactaccessbackend_sql.cpp pim/odatebookaccessbackend_sql.cpp 105SOURCES += pim/otodoaccesssql.cpp pim/ocontactaccessbackend_sql.cpp pim/odatebookaccessbackend_sql.cpp
106 106
107} 107}
108 108
109INTERFACES = otimepickerbase.ui orecurrancebase.ui 109INTERFACES = otimepickerbase.ui orecurrancebase.ui
110TARGET = opie 110TARGET = opie
111 111
112include ( big-screen/big-screen.pro )
113 112
114include ( $(OPIEDIR)/include.pro ) 113include ( $(OPIEDIR)/include.pro )