8 files changed, 30 insertions, 25 deletions

diff --git a/noncore/apps/opie-console/atconfigdialog.cpp b/noncore/apps/opie-console/atconfigdialog.cpp
index 5c02692..e683ab3 100644
--- a/noncore/apps/opie-console/atconfigdialog.cpp
+++ b/noncore/apps/opie-console/atconfigdialog.cpp
@@ -1,215 +1,216 @@
 
 #include <qlineedit.h>
 #include <qspinbox.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qtabwidget.h>
 #include <qlabel.h>
 #include <qcombobox.h>
 #include <qscrollview.h>
 
 #include "atconfigdialog.h"
 #include "io_modem.h"
 
 
 ATConfigDialog::ATConfigDialog(  QWidget* parent, const char* name, bool modal, WFlags fl )
     : QDialog( parent, name, modal, fl ) {
 
 
     setCaption( tr( "Dialing parameter setup" ) );
 
     QVBoxLayout *layout = new QVBoxLayout( this );
     QTabWidget *tabWidget = new QTabWidget( this );
 
     tabWidget->addTab( tab0( this ), tr("Settings1") );
     tabWidget->addTab( tab1( this ), tr("Settings2") );
 
     layout->addWidget( tabWidget );
 
 }
 
 QWidget* ATConfigDialog::tab0( QWidget* parent) {
 
 
     QScrollView* sv = new QScrollView( parent );
 
     QWidget *returnWidget = new QWidget( sv->viewport() );
     sv->setResizePolicy( QScrollView::AutoOneFit );
 //  sv->setHScrollBarMode( QScrollView::AlwaysOff );
 //    sv->setFrameShape( QFrame::NoFrame );
 
 
 
 
     QGridLayout *layout = new QGridLayout( returnWidget, 10, 2 );
 
     QLabel *initStringLabel = new QLabel( tr("Init string "),  returnWidget );
     initStringLine = new QLineEdit( returnWidget );
     layout->addWidget( initStringLabel, 0, 0 );
     layout->addWidget( initStringLine, 0, 1 );
 
     QLabel *resetStringLabel = new QLabel( tr("Reset string "), returnWidget );
     resetStringLine = new QLineEdit( returnWidget );
     layout->addWidget( resetStringLabel, 1, 0 );
     layout->addWidget( resetStringLine, 1, 1 );
 
     QLabel *dialPref1Label = new QLabel( tr("Dialing prefix #1 " ), returnWidget );
     dialPref1Line = new QLineEdit( returnWidget );
     layout->addWidget( dialPref1Label, 2, 0 );
     layout->addWidget( dialPref1Line, 2, 1 );
 
     QLabel *dialSuf1Label = new QLabel( tr("Dialing suffix #1 " ), returnWidget );
     dialSuf1Line = new QLineEdit( returnWidget );
     layout->addWidget( dialSuf1Label, 3, 0 );
     layout->addWidget( dialSuf1Line, 3, 1 );
 
     QLabel *dialPref2Label = new QLabel( tr("Dialing prefix #2 " ), returnWidget );
     dialPref2Line = new QLineEdit( returnWidget );
     layout->addWidget( dialPref2Label, 4, 0 );
     layout->addWidget( dialPref2Line, 4, 1 );
 
     QLabel *dialSuf2Label = new QLabel( tr("Dialing suffix #2 " ), returnWidget );
     dialSuf2Line = new QLineEdit( returnWidget );
     layout->addWidget( dialSuf2Label, 5, 0 );
     layout->addWidget( dialSuf2Line, 5, 1 );
 
     QLabel *dialPref3Label = new QLabel( tr("Dialing prefix #3 " ), returnWidget );
     dialPref3Line = new QLineEdit( returnWidget );
     layout->addWidget( dialPref3Label, 6, 0 );
     layout->addWidget( dialPref3Line, 6, 1 );
 
     QLabel *dialSuf3Label = new QLabel( tr("Dialing suffix #3 " ), returnWidget );
     dialSuf3Line = new QLineEdit( returnWidget );
     layout->addWidget( dialSuf3Label, 7, 0 );
     layout->addWidget( dialSuf3Line, 7, 1 );
 
     QLabel *connectLabel = new QLabel( tr("Connect string " ), returnWidget );
     connectLine = new QLineEdit( returnWidget );
     layout->addWidget( connectLabel, 8, 0 );
     layout->addWidget( connectLine, 8, 1 );
 
     QLabel *hangupLabel = new QLabel( tr("Hang-up string " ), returnWidget );
     hangupLine  = new QLineEdit( returnWidget );
     layout->addWidget( hangupLabel, 9, 0 );
     layout->addWidget( hangupLine, 9, 1 );
 
     sv->addChild( returnWidget );
 
     return sv;
 
 }
 
 QWidget* ATConfigDialog::tab1( QWidget* parent ) {
 
 
     QWidget *returnWidget = new QWidget( parent );
 
     QGridLayout *layout = new QGridLayout( returnWidget, 8, 2 );
 
     QLabel *dialTimeLabel = new QLabel( tr("Dial time " ), returnWidget );
     dialTimeSpin = new QSpinBox( returnWidget );
     layout->addWidget( dialTimeLabel, 0, 0 );
     layout->addWidget( dialTimeSpin, 0, 1 );
 
     QLabel *delayRedialLabel = new QLabel( tr("Delay before redial " ), returnWidget );
     delayRedialSpin = new QSpinBox( returnWidget );
     layout->addWidget( delayRedialLabel, 1, 0 );
     layout->addWidget( delayRedialSpin, 1, 1 );
 
     QLabel *numberTriesLabel = new QLabel( tr("Number of tries " ), returnWidget );
     numberTriesSpin = new QSpinBox( returnWidget );
     layout->addWidget( numberTriesLabel, 2, 0 );
     layout->addWidget( numberTriesSpin, 2, 1 );
 
     QLabel *dtrDropTimeLabel = new QLabel( tr("DTR drop time (0=no) " ), returnWidget );
     dtrDropTimeSpin = new QSpinBox( returnWidget );
     layout->addWidget( dtrDropTimeLabel, 3, 0 );
     layout->addWidget( dtrDropTimeSpin, 3, 1 );
 
     QLabel *bpsDetectLabel = new QLabel( tr("Auto bps detect " ), returnWidget );
     bpsDetectBox = new QComboBox( returnWidget );
     layout->addWidget( bpsDetectLabel, 4, 0 );
     layout->addWidget( bpsDetectBox, 4, 1 );
     bpsDetectBox->insertItem( tr("No") );
     bpsDetectBox->insertItem( tr("Yes") );
 
     QLabel *dcdLinesLabel = new QLabel( tr("Modem has DCD line " ), returnWidget );
     dcdLinesBox = new QComboBox( returnWidget );
     layout->addWidget( dcdLinesLabel, 5, 0 );
     layout->addWidget( dcdLinesBox, 5, 1 );
     dcdLinesBox->insertItem( tr("No") );
     dcdLinesBox->insertItem( tr("Yes") );
 
     QLabel *multiLineUntagLabel = new QLabel( tr("Multi-line untag " ), returnWidget );
     multiLineUntagBox = new QComboBox( returnWidget );
     layout->addWidget( multiLineUntagLabel, 6, 0 );
     layout->addWidget( multiLineUntagBox, 6, 1 );
     multiLineUntagBox->insertItem( tr("No") );
     multiLineUntagBox->insertItem( tr("Yes") );
 
     return returnWidget;
 
 }
 
 
 void ATConfigDialog::readConfig( const Profile& config ) {
+    qWarning("config in atconfigdialog");
 
     initStringLine->setText( config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING ) );
     resetStringLine->setText( config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING ) );
     dialPref1Line->setText( config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ) );
     dialSuf1Line->setText( config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
     dialPref2Line->setText( config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 ) );
     dialSuf2Line->setText( config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
     dialPref3Line->setText( config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 ) );
     dialSuf3Line->setText( config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
     connectLine->setText( config.readEntry("DefaultConnect", MODEM_DEFAULT_CONNECT_STRING ) );
     hangupLine->setText( config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) );
     dialTimeSpin->setValue( config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME ) );
     delayRedialSpin->setValue( config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL ) );
     numberTriesSpin->setValue( config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES ) );
     dtrDropTimeSpin->setValue( config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME ) );
     bpsDetectBox->setCurrentItem( config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT ) );
     dcdLinesBox->setCurrentItem( config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES ) );
     multiLineUntagBox->setCurrentItem( config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG ) );
 
         // Not implemented yet
         resetStringLine->setEnabled(false);
         dialSuf1Line->setEnabled(false);
         dialPref2Line->setEnabled(false);
         dialSuf2Line->setEnabled(false);
         dialPref3Line->setEnabled(false);
         dialSuf3Line->setEnabled(false);
         dialTimeSpin->setEnabled(false);
         delayRedialSpin->setEnabled(false);
         numberTriesSpin->setEnabled(false);
         dtrDropTimeSpin->setEnabled(false);
         bpsDetectBox->setEnabled(false);
         dcdLinesBox->setEnabled(false);
         multiLineUntagBox->setEnabled(false);
 }
 
 void ATConfigDialog::writeConfig( Profile& config ) {
 
     config.writeEntry( "InitString", initStringLine->text() );
     config.writeEntry( "ResetString", resetStringLine->text() );
     config.writeEntry( "DialPrefix1", dialPref1Line->text() );
     config.writeEntry( "DialSuffix1", dialSuf1Line->text() );
     config.writeEntry( "DialPrefix2", dialPref2Line->text() );
     config.writeEntry( "DialSuffix2",  dialSuf2Line->text() );
     config.writeEntry( "DialPrefix3", dialPref3Line->text() );
     config.writeEntry( "DialSuffix3", dialSuf3Line->text() );
     config.writeEntry( "DefaultConnect", connectLine->text() );
     config.writeEntry( "HangupString", hangupLine->text() );
     config.writeEntry( "DialTime", dialTimeSpin->value() );
     config.writeEntry( "DelayRedial", delayRedialSpin->value() );
     config.writeEntry( "NumberTries", numberTriesSpin->value() );
     config.writeEntry( "DTRDRopTime", dtrDropTimeSpin->value() );
     config.writeEntry( "BPSDetect", bpsDetectBox->currentItem() );
     config.writeEntry( "DCDLines", dcdLinesBox->currentItem() );
     config.writeEntry( "MultiLineUntag", multiLineUntagBox->currentItem() );
 
 }
 
 
 ATConfigDialog::~ATConfigDialog() {
 }
diff --git a/noncore/apps/opie-console/dialdialog.cpp b/noncore/apps/opie-console/dialdialog.cpp
index ac1e1db..b91727b 100644
--- a/noncore/apps/opie-console/dialdialog.cpp
+++ b/noncore/apps/opie-console/dialdialog.cpp
@@ -1,100 +1,101 @@
 
 
 #include <qlayout.h>
 #include <qlabel.h>
 #include <qcombobox.h>
 #include <qscrollview.h>
 #include <qpushbutton.h>
 #include <qfont.h>
 #include <qbuttongroup.h>
 
 #include "dialdialog.h"
 
 
 
 DialDialog::DialDialog(  QWidget* parent, const char* name, bool modal, WFlags fl )
     : QDialog( parent, name, modal, fl ) {
 
     setCaption( tr( "Enter number" ) );
 
     QVBoxLayout *mainLayout = new QVBoxLayout( this );
 
     QLabel *textLabel = new QLabel( this );
+    textLabel->setTextFormat( QLabel::RichText );
     textLabel->setText( tr("Enter the number you want to dial. When finished, press ok") );
 
     m_dialLine = new QLineEdit( this );
     m_dialLine->setReadOnly( true );
     m_dialLine->setFrame( false );
     m_dialLine->setAlignment( Qt::AlignLeft );
     QFont dialLine_font( m_dialLine->font() );
     dialLine_font.setBold( TRUE );
     dialLine_font.setPointSize( 18 );
     m_dialLine->setFont( dialLine_font );
 
     QWidget* dialWidget = new QWidget( this );
     QGridLayout *layout = new QGridLayout( dialWidget , 4, 3 );
 
     QButtonGroup *dialButtons = new QButtonGroup( );
 
     QPushButton *number0 = new QPushButton( dialWidget );
     number0->setText( QString( "0" ) );
     QFont number0_font( number0->font() );
     number0_font.setBold( TRUE );
     number0->setFont( number0_font );
     layout->addWidget( number0, 4, 1 );
     dialButtons->insert( number0 );
 
     int x = 0, y = 0;
     for ( int i = 0 ; i < 9;  i++ ) {
         QPushButton *number = new QPushButton( dialWidget );
         number->setText( QString( "%1" ).arg( i + 1 ) );
         QFont number_font( number->font() );
         number_font.setBold( TRUE );
         number->setFont( number_font );
 
         dialButtons->insert( number );
 
         layout->addWidget( number, x, y );
 
         if ( y < 2 ) {
             y++;
         } else {
             x++;
             y = 0;
         }
     }
 
     connect( dialButtons, SIGNAL( clicked( int ) ), this, SLOT( slotEnterNumber( int ) ) );
 
     mainLayout->addStretch( 2 );
     mainLayout->addWidget( textLabel );
     mainLayout->addStretch( 1 );
     mainLayout->addWidget( m_dialLine );
     mainLayout->addStretch( 2 );
     mainLayout->addWidget( dialWidget );
     mainLayout->addStretch( 4 );
 }
 
 
 void DialDialog::slotEnterNumber( int number ) {
 
     // pretty stupid, just for testing .-)
 
         m_number.append(QString("%1").arg(number));
 
         setNumber(m_number);
 }
 
 DialDialog::~DialDialog() {
 }
 
 QString DialDialog::number() {
     return m_number;
 
 }
 
 void DialDialog::setNumber( QString number )
 {
     m_dialLine->setText( QString("%1").arg( number ) );
 }
 
diff --git a/noncore/apps/opie-console/dialer.cpp b/noncore/apps/opie-console/dialer.cpp
index 8524422..67ad10e 100644
--- a/noncore/apps/opie-console/dialer.cpp
+++ b/noncore/apps/opie-console/dialer.cpp
@@ -1,319 +1,315 @@
 #include "dialer.h"
 
 #include <qlayout.h>
 #include <qprogressbar.h>
 #include <qlabel.h>
 #include <qpushbutton.h>
 #include <qapp.h>
 #include <qtimer.h>
 #include <qmessagebox.h>
 
 #include <unistd.h>
 #include <string.h>
 #include <fcntl.h>
 #include <errno.h>
 
+#include "io_modem.h"
+
 // State machine:          | When an error occurs, we don't have to
 //                         | reset everything.
 // (init) <------+         | But if the user wants to reset,
 //   |           |         | we stop dialing immediately.
 //   v           |         |
 // (options) ----+         | Following the state machine is necessary
 //   |       \             | to get determinable results.
 //   v        ^            |
 // (dial) ----+            |
 //   |        ^            |
 //   v        |            |
 // (online) --+            |
 //   |                     |
 //   v                     |
 
 
 // from atconfigdialog
 //initStringLine->setText( config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING ) );
 //resetStringLine->setText( config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING ) );
 //dialPref1Line->setText( config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ) );
 //dialSuf1Line->setText( config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
 //dialPref2Line->setText( config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 ) );
 //dialSuf2Line->setText( config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
 //dialPref3Line->setText( config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 ) );
 //dialSuf3Line->setText( config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
 //connectLine->setText( config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING ) );
 //hangupLine->setText( config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) );
 
 // from modemconfigwidget
 //int rad_flow = prof.readNumEntry("Flow");
 //int rad_parity = prof.readNumEntry("Parity");
 //int speed = prof.readNumEntry("Speed");
 //QString number = prof.readEntry("Number");
 
 Dialer::Dialer(const Profile& profile, int fd, QWidget *parent, const char *name)
 : QDialog(parent, name, true), m_fd(fd), m_profile(profile)
 {
         QVBoxLayout *vbox;
         QLabel *desc;
 
-        //m_profile.writeEntry("InitString", "ATZ");
-        //m_profile.writeEntry("DialPrefix1", "ATDT");
-        //m_profile.writeEntry("Termination", "\n");
 
         usercancel = 0;
         cleanshutdown = 0;
 
-        //fcntl(m_fd, F_SETFL, O_NONBLOCK);
 
         desc = new QLabel(QObject::tr("Dialing number: %1").arg(m_profile.readEntry("Number")), this);
         progress = new QProgressBar(this);
         status = new QLabel("", this);
         status->setFrameStyle(QFrame::Panel | QFrame::Sunken);
         cancel = new QPushButton(QObject::tr("Cancel"), this);
 
         vbox = new QVBoxLayout(this, 2);
         vbox->add(desc);
         vbox->add(progress);
         vbox->add(status);
         vbox->add(cancel);
 
         connect(cancel, SIGNAL(clicked()), SLOT(slotCancel()));
 
         show();
 
         QTimer::singleShot(500, this, SLOT(slotAutostart()));
 }
 
 Dialer::~Dialer()
 {
 }
 
 void Dialer::setHangupOnly()
 {
         state = state_cancel;
         usercancel = 1;
-        send("+++ATH\r");
+        send( m_profile.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING )+"\r" );
 }
 
 void Dialer::slotCancel()
 {
         if(state != state_online)
         {
                 usercancel = 1;
                 reset();
         }
         else {
             accept();
         }
 }
 
 void Dialer::reset()
 {
     qWarning("reset");
         switchState(state_cancel);
 }
 
 void Dialer::slotAutostart()
 {
         //state = state_preinit;
         dial(m_profile.readEntry("Number"));
 }
 
 void Dialer::dial(const QString& number)
 {
         while(state != state_online)
         {
                 if(!usercancel)
                 {
                         state = state_preinit;
                         trydial(number);
                 }
                 else break;
         }
 
         if(usercancel)
         {
                 // modem hangup
                 trydial(QString::null);
                 reject();
         }
 }
 
 void Dialer::trydial(const QString& number)
 {
     qWarning("TryDial:%s", number.latin1() );
         if(state != state_cancel) switchState(state_preinit);
         if(cleanshutdown)
         {
-            qWarning("HangupString " + m_profile.readEntry("HangupString"));
-            //send(m_profile.readEntry("HangupString"));
-                send("+++ATH\r");
-                //send("");
+            qWarning("HangupString " + m_profile.readEntry("HangupString",  MODEM_DEFAULT_HANGUP_STRING));
+            send(m_profile.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) + "\r");
         }
 
         if(state != state_cancel)
         {
                 switchState(state_init);
-                //send("ATZ");
-                qWarning("Init String " + m_profile.readEntry("InitString") );
-        //      send(m_profile.readEntry("InitString", "AT"));
-                send("AT\r");
+//                qWarning("Init String " + m_profile.readEntry("InitString") );
+                send(m_profile.readEntry("InitString",MODEM_DEFAULT_INIT_STRING ) + "\r");
                 QString response2 = receive();
                 if(!response2.contains("\nOK\r"))
                         reset();
         }
 
         /*if(state != state_cancel)
         {
                 switchState(state_options);
 
                 qWarning("ATM3l3");
                 send("ATM3L3\r");
                 QString response3 = receive();
                 if(!response3.contains("\nOK\r"))
                         reset();
         }
 */
 
         if(state != state_cancel)
         {
                 switchState(state_dialtone);
 
                 send("ATX1\r");
                 QString response4 = receive();
                 if(!response4.contains("\nOK\r"))
                         reset();
         }
 
         if(state != state_cancel)
         {
             qWarning("progress");
                 switchState(state_dialing);
 
-                send(QString("ATDT %1\r").arg(number));
-        //      send(QString("%1 %2").arg(m_profile.readEntry("DialPrefix1")).arg(number));
+        //      send(QString("ATDT %1\r").arg(number));
+                send(QString("%1 %2\r").arg(m_profile.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ))
+                     .arg(number));
+
                 QString response5 = receive();
                 if(!response5.contains("CONNECT") )
                 {
                         if(response5.contains("BUSY"))
                                 switchState(state_dialing);
                         else
                         {
                                 QMessageBox::warning(this,
                                         QObject::tr("Failure"),
                                         QObject::tr("Dialing the number failed."));
                                 slotCancel();
                         }
                 }
         }
 
 
         if(state != state_cancel)
         {
             state = state_online;
             slotCancel();
         }
 }
 
 void Dialer::send(const QString& msg)
 {
         QString m = msg;
         int bytes;
         QString termination;
 
         qWarning("Sending: %s", m.latin1());
 
         /*termination = "\r";
         //termination = m_profile.readEntry("Termination");
         if(termination == "\n") m = m + "\n";
         else if(termination == "\r") m = m + "\r";
         else m = m + "\r\n";
 */
         m = m.replace(QRegExp("\n"), "\r");
 
         bytes = ::write(m_fd, m.local8Bit(), strlen(m.local8Bit()));
         if(bytes < 0)
         {
                 reset();
         }
 }
 
 QString Dialer::receive()
 {
         QString buf;
         char buffer[1024];
         int ret;
         int counter = 0;
 
         while(1)
         {
                 ret = ::read(m_fd, buffer, sizeof(buffer));
 
                 if(ret > 0)
                 {
                         for(int i = 0; i < ret; i++)
                                 buffer[i] = buffer[i] & 0x7F;
                         buffer[ret] = 0;
                         qWarning("Got: %s", buffer);
                         buf.append(QString(buffer));
                         if(buf.contains("OK") || buf.contains("ERROR") || buf.contains("CONNECT") || (buf.contains("BUSY")))
                         {
                                 //qWarning("Receiving: '%s'", buf.latin1());
                                 cleanshutdown = 1;
                                 return buf;
                         }else if (buf.contains("NO CARRIER") || buf.contains("NO DIALTONE")  ) {
                             cleanshutdown = 1;
                             return QString::null;
                         }
                 }
                 else if(ret < 0)
                 {
                         if(errno != EAGAIN) reset();
                         else if(!(counter++ % 100)) qApp->processEvents();
                 }
                 else if(!(counter++ % 100)) qApp->processEvents();
 
                 if(usercancel) return QString::null;
         }
 
         cleanshutdown = 1;
         return QString::null;
 }
 
 void Dialer::switchState(int newstate)
 {
         int oldstate = state;
         state = newstate;
 
         switch(state)
         {
                 case state_cancel:
                         status->setText(QObject::tr("Cancelling..."));
                         progress->setProgress(0);
                         break;
                 case state_preinit:
                         status->setText(QObject::tr("Searching modem"));
                         progress->setProgress(10);
                         break;
                 case state_init:
                         status->setText(QObject::tr("Initializing..."));
                         progress->setProgress(20);
                         break;
                 case state_options:
                         status->setText(QObject::tr("Reset speakers"));
                         progress->setProgress(30);
                         break;
                 case state_dialtone:
                         status->setText(QObject::tr("Turning off dialtone"));
                         progress->setProgress(40);
                         break;
                 case state_dialing:
                         if(oldstate != state_dialing) status->setText(QObject::tr("Dial number"));
                         else status->setText(QObject::tr("Line busy, redialing number"));
                         progress->setProgress(50);
                         break;
                 case state_online:
                         status->setText(QObject::tr("Connection established"));
                         progress->setProgress(100);
                         cancel->setText(QObject::tr("Dismiss"));
                         break;
         }
 }
 
diff --git a/noncore/apps/opie-console/io_layer.h b/noncore/apps/opie-console/io_layer.h
index af61099..ed4478b 100644
--- a/noncore/apps/opie-console/io_layer.h
+++ b/noncore/apps/opie-console/io_layer.h
@@ -1,126 +1,132 @@
 #ifndef OPIE_IO_LAYER_H
 #define OPIE_IO_LAYER_H
 
 #include <qbitarray.h>
 #include <qobject.h>
 
 
 #include <qpe/config.h>
 
 #include "profile.h"
 
 /**
  * This is the base class for IO Layers
  * It will used to sent and recv data( QByteArray )
  * it
  */
 class IOLayer : public QObject {
     Q_OBJECT
 public:
     enum Error {
         NoError = -1,
         Refuse = 0,
         CouldNotOpen =1,
         ClosedUnexpected =2,
         ClosedError =3,
         Terminate = 4
         /* add more errors here */
     };
     enum Feature {
         AutoConnect = 0,
         TransferFile = 1,
         Close = 2
     };
     /**
      * a small c'tor
      */
     IOLayer();
 
     /**
      * create an IOLayer instance from a config file
      * the currently set group stores the profile/session
      * information
      */
     IOLayer( const Profile& );
 
     /**
      * destructor
      */
     virtual ~IOLayer();
 
     /**
      * a small internal identifier
      */
     virtual QString identifier() const = 0;
 
     /**
      * a short name
      */
     virtual QString name() const = 0;
 
     /**
      * a file descriptor which opens
      * the device for io but does not
      * do any ioctling on it...
      * and it'll stop listening to the before opened
      * device
      */
     virtual int rawIO()const;
 
     /**
      * will close the rawIO stuff
      * and will listen to it's data again...
      */
     virtual void closeRawIO(int);
 
     /**
      * What does the IOLayer support?
      * Bits are related to features
      */
     virtual QBitArray supports()const = 0;
 
     virtual bool isConnected() = 0;
 
 signals:
     /**
      * received input as QCString
      */
     virtual void received( const QByteArray& );
 
     /**
      * an error occured
      * int for the error number
      * and QString for a text
      */
     virtual void error( int, const QString& );
 
+
     virtual void closed();
+
+    /* signal emitted for closure of the IOLayer
+     * for some reasons
+     */
+    virtual void closed(IOLayer*);
 public slots:
     /**
      * send a QCString to the device
      */
     virtual void send( const QByteArray& ) = 0;
 
     /**
      * bool open
      */
     virtual bool open() = 0;
 
     /**
      * close the io
      */
     virtual void close() = 0;
 
     /**
      * closes and reloads the settings
      */
     virtual void reload( const Profile& ) = 0;
 
     /**
      * set the size
      * needed for pty
      */
     virtual void setSize(int lines, int cols );
 };
 
 #endif
diff --git a/noncore/apps/opie-console/io_modem.h b/noncore/apps/opie-console/io_modem.h
index 1328706..17228bd 100644
--- a/noncore/apps/opie-console/io_modem.h
+++ b/noncore/apps/opie-console/io_modem.h
@@ -1,71 +1,71 @@
 #ifndef OPIE_IO_MODEM
 #define OPIE_IO_MODEM
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 #include "profile.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define MODEM_DEFAULT_DEVICE       "/dev/ttyS0"
 #define MODEM_DEFAULT_BAUD         9600
 #define MODEM_DEFAULT_PARITY       0
 #define MODEM_DEFAULT_DBITS        8
 #define MODEM_DEFAULT_SBITS        1
 #define MODEM_DEFAULT_FLOW         0
 
-#define MODEM_DEFAULT_INIT_STRING  "ATZ"
+#define MODEM_DEFAULT_INIT_STRING  "AT"
 #define MODEM_DEFAULT_RESET_STRING "ATZ~"
 #define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
 #define MODEM_DEFAULT_DIAL_SUFFIX1 ""
 #define MODEM_DEFAULT_DIAL_PREFIX2 ""
 #define MODEM_DEFAULT_DIAL_SUFFIX2 ""
 #define MODEM_DEFAULT_DIAL_PREFIX3 ""
 #define MODEM_DEFAULT_DIAL_SUFFIX3 ""
 #define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
 #define MODEM_DEFAULT_HANGUP_STRING "+++ATH"
 #define MODEM_DEFAULT_CANCEL_STRING ""
 #define MODEM_DEFAULT_DIAL_TIME     45
 #define MODEM_DEFAULT_DELAY_REDIAL  2
 #define MODEM_DEFAULT_NUMBER_TRIES  10
 #define MODEM_DEFAULT_DTR_DROP_TIME 1
 #define MODEM_DEFAULT_BPS_DETECT    0   // bool
 #define MODEM_DEFAULT_DCD_LINES     1   //bool
 #define MODEM_DEFAULT_MULTI_LINE_UNTAG 0 // bool
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOModem : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOModem(const Profile &);
     ~IOModem();
 
     QString identifier() const;
     QString name() const;
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
     bool open();
     void close();
     void reload(const Profile &);
 
 private:
 
     QString m_initString, m_resetString, m_dialPref1, m_dialSuf1, m_dialPref2,
         m_dialSuf2, m_dialPref3, m_dialSuf3, m_connect, m_hangup, m_cancel;
     int  m_dialTime, m_delayRedial, m_numberTries, m_dtrDropTime,
         m_bpsDetect, m_dcdLines, m_multiLineUntag;
         Profile m_profile;
 
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif
diff --git a/noncore/apps/opie-console/io_serial.cpp b/noncore/apps/opie-console/io_serial.cpp
index 03e92dd..ddd4994 100644
--- a/noncore/apps/opie-console/io_serial.cpp
+++ b/noncore/apps/opie-console/io_serial.cpp
@@ -1,235 +1,231 @@
 
 #include <fcntl.h>
 #include <termios.h>
 #include <errno.h>
 #include <unistd.h>
 #include <stdio.h>
 
 #include "io_serial.h"
 
 IOSerial::IOSerial(const Profile &config) : IOLayer(config) {
     m_read = 0l;
     m_error = 0l;
     m_fd = 0;
     m_connected = false;
     reload(config);
 }
 
 
 IOSerial::~IOSerial() {
     if (m_fd) {
         close();
     }
 }
 
 void IOSerial::send(const QByteArray &data) {
     if (m_fd) {
         write(m_fd, data.data(), data.size());
     } else {
         emit error(Refuse, tr("Not connected"));
     }
 }
 
 void IOSerial::close() {
     if (m_fd) {
         delete m_read;
         delete m_error;
         ::close(m_fd);
         m_fd = 0;
         m_connected = false;
     } else {
         m_connected = false;
         emit error(Refuse, tr("Not connected"));
     }
 }
 
 bool IOSerial::open() {
     if (!m_fd) {
         struct termios tty;
         m_fd = ::open(m_device, O_RDWR | O_NOCTTY | O_NONBLOCK);
         if (m_fd < 0) {
             emit error(CouldNotOpen, strerror(errno));
             m_fd = 0;
             return FALSE;
         }
         tcgetattr(m_fd, &tty);
 
         /* Baud rate */
         int speed = baud(m_baud);
         if (speed == -1) {
             emit error(Refuse, tr("Invalid baud rate"));
         }
         cfsetospeed(&tty, speed);
         cfsetispeed(&tty, speed);
 
         /* Take care of Space / Mark parity */
         if (m_dbits == 7 && (m_parity == ParitySpace || m_parity == ParityMark)) {
             m_dbits = 8;
         }
 
         /* Data bits */
         switch (m_dbits) {
             case 5: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS5; break;
             case 6: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS6; break;
             case 7: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS7; break;
             case 8: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; break;
             default: break;
         }
 
         /* Raw, no echo mode */
         tty.c_iflag =  IGNBRK;
         tty.c_lflag = 0;
         tty.c_oflag = 0;
         tty.c_cflag |= CLOCAL | CREAD;
 
         /* Stop bits */
         if (m_sbits == 2) {
             tty.c_cflag |= CSTOPB;
         } else {
             tty.c_cflag &= ~CSTOPB;
         }
 
         tty.c_cc[VMIN] = 1;
         tty.c_cc[VTIME] = 5;
 
         /* Flow control */
         if (m_flow & FlowSW)
             tty.c_iflag |= IXON | IXOFF;
         else
             tty.c_iflag &= ~(IXON|IXOFF|IXANY);
 
         if (m_flow & FlowHW)
             tty.c_cflag |= CRTSCTS;
         else
             tty.c_cflag &= ~CRTSCTS;
 
         /* Parity */
         tty.c_cflag &= ~(PARENB | PARODD);
         if (m_parity & ParityEven)
             tty.c_cflag |= PARENB;
         else if (m_parity & ParityOdd)
             tty.c_cflag |= (PARENB | PARODD);
 
         /* Set the changes */
         tcsetattr(m_fd, TCSANOW, &tty);
 
         /* Notifications on read & errors */
         m_read = new QSocketNotifier(m_fd, QSocketNotifier::Read, this);
         m_error = new QSocketNotifier(m_fd, QSocketNotifier::Exception, this);
         connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
         connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
         m_connected = false;
         return TRUE;
     } else {
         emit error(Refuse, tr("Device is already connected"));
         m_fd = 0;
         return FALSE;
     }
 }
 
 void IOSerial::reload(const Profile &config) {
     m_device = config.readEntry("Device", SERIAL_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Speed", SERIAL_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", SERIAL_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", SERIAL_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", SERIAL_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", SERIAL_DEFAULT_FLOW);
 
 }
 
 int IOSerial::baud(int baud) const {
     switch (baud) {
         case 300:    return B300;    break;
         case 600:    return B600;    break;
         case 1200:   return B1200;   break;
         case 2400:   return B2400;   break;
         case 4800:   return B4800;   break;
         case 9600:   return B9600;   break;
         case 19200:  return B19200;  break;
         case 38400:  return B38400;  break;
         case 57600:  return B57600;  break;
         case 115200: return B115200; break;
     }
     return -1;
 }
 
 void IOSerial::errorOccured() {
     emit error(ClosedUnexpected, strerror(errno));
     close();
 }
 
 void IOSerial::dataArrived() {
     QByteArray array(4097);
 
     int len = read(m_fd, array.data(), 4096);
     if (len == 0)
         close();
     if (len < 0)
         return;
-    qWarning("got from layer");
-    for (int i = 0; i < len; i++ ) {
-        printf("%c", array[i] );
-    }
-    printf("\n");
+
     array.resize( len );
     emit received(array);
 }
 
 QString IOSerial::identifier() const {
     return "serial";
 }
 
 QString IOSerial::name() const {
     return "RS232 Serial IO Layer";
 }
 int IOSerial::rawIO()const {
     if (m_read )
         disconnect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
     if (m_error )
         disconnect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
 
     int fd = ::open(m_device, O_RDWR  );
 
     return fd;
 };
 void IOSerial::closeRawIO(int fd) {
     if (m_read )
         connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
     if (m_error )
         connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
 
     ::close( fd );
 }
 QBitArray IOSerial::supports()const {
     QBitArray ar(3);
     ar[0] = ar[2] = 0;
     ar[1] = 1;
 
     return ar;
 }
 
 bool IOSerial::isConnected() {
     return m_connected;
 }
 
 /*
  * this is used to give the
  * class below IOSerial
  * the possibility of
  * exclusive usage
  */
 void IOSerial::internDetach() {
     if (m_read )
         disconnect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
     if (m_error )
         disconnect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
 }
 /*
  * give power back
  */
 void IOSerial::internAttach() {
     if (m_read )
         connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
     if (m_error )
         connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
 }
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index 37eb184..f7fb6f3 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -1,252 +1,257 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qhbox.h>
 #include <qregexp.h>
 
 #include "modemconfigwidget.h"
 #include "dialdialog.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
     m_device = new QLabel(tr( "Modem is attached to:" ), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel* telLabel = new QLabel( this );
     telLabel->setText( tr( "Enter telefon number here:" ) );
     QHBox *buttonBox = new QHBox( this );
     m_telNumber = new QLineEdit( buttonBox );
     QPushButton *atButton = new QPushButton( buttonBox );
     atButton->setText( tr( "AT commands" ) );
     connect( atButton, SIGNAL( clicked() ), this, SLOT( slotAT() ) );
 
     QPushButton *dialButton = new QPushButton( buttonBox );
     dialButton->setText( tr( "Enter number" ) );
     connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) );
 
     m_base = new IOLayerBase( this, "base" );
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( telLabel );
     m_lay->addWidget( buttonBox );
     m_lay->addWidget( m_base );
     m_lay->addStretch( 0 );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttyS2" );
 
     atConf = new  ATConfigDialog( this, "ATConfig", true );
 }
 
 ModemConfigWidget::~ModemConfigWidget() {
 
 }
 void ModemConfigWidget::load( const Profile& prof ) {
 
     int rad_flow = prof.readNumEntry( "Flow" );
     int rad_parity = prof.readNumEntry( "Parity" );
     int speed = prof.readNumEntry( "Speed" );
     int dbits = prof.readNumEntry("DataBits");
     int sbits = prof.readNumEntry("StopBits");
     QString number = prof.readEntry( "Number" );
 
     if ( !number.isEmpty() ) {
         m_telNumber->setText( number );
     }
 
     if ( rad_flow == 1 ) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else if (rad_flow == 0) {
          m_base->setFlow( IOLayerBase::None );
     }
 
 
     if ( rad_parity == 1 ) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ){
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed( IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600 );
         break;
     case 38400:
         m_base->setSpeed( IOLayerBase::Baud_38400 );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200 );
         break;
     case 9600:
     default:
         m_base->setSpeed( IOLayerBase::Baud_9600 );
         break;
     }
 
 
     if ( dbits == 5) {
         m_base->setData( IOLayerBase::Data_Five );
     } else if (rad_flow == 6) {
         m_base->setData( IOLayerBase::Data_Six );
     } else if (rad_flow == 7) {
         m_base->setData( IOLayerBase::Data_Seven );
     } else {
         m_base->setData( IOLayerBase::Data_Eight );
     }
 
     if ( sbits == 2) {
         m_base->setStop( IOLayerBase::Stop_Two );
     } else if ( sbits == 15 ) {
         m_base->setStop( IOLayerBase::Stop_OnePointFive );
     } else {
         m_base->setStop( IOLayerBase::Stop_One );
     }
 
 
-
+    atConf->readConfig( prof );
     if ( prof.readEntry( "Device" ).isEmpty() ) {
+        qWarning("device empty!");
         return;
     }
     setCurrent( prof.readEntry( "Device" ), m_deviceCmb );
 
-    atConf->readConfig( prof );
+
 }
 
 /*
  * save speed,
  * flow,
  * parity
  */
 void ModemConfigWidget::save( Profile& prof ) {
     int flow, parity, speed, data, stop;
     flow = parity = speed = data = stop = 0;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     switch( m_base->data() ) {
     case IOLayerBase::Data_Five:
         data = 5;
         break;
     case IOLayerBase::Data_Six:
         data = 6;
         break;
     case IOLayerBase::Data_Seven:
         data = 7;
         break;
     case IOLayerBase::Data_Eight:
         data = 8;
         break;
     }
 
     switch( m_base->stop() ) {
     case IOLayerBase::Stop_One:
         stop = 1;
         break;
     case IOLayerBase::Stop_OnePointFive:
         stop = 15;
         break;
     case IOLayerBase::Stop_Two:
         stop = 2;
         break;
     }
 
     prof.writeEntry( "Flow", flow );
     prof.writeEntry( "Parity", parity );
     prof.writeEntry( "Speed", speed );
     prof.writeEntry("DataBits", data);
     prof.writeEntry("StopBits", stop);
     prof.writeEntry( "Number", m_telNumber->text() );
 
 
     atConf->writeConfig(prof);
 }
 
 void ModemConfigWidget::slotAT() {
     //  ATConfigDialog conf( this, "ATConfig", true );
+    // josef/Max I know why don't you create the stuff on the stack
+    // but making it a TopLevel Dialog and ignoring
+    // cancel is not fun either...
+    // what to do? FIXME!!! -zecke
     atConf->showMaximized();
     if ( atConf->exec() != QDialog::Accepted ) {
         // reload old settings
     }
 }
 
 void ModemConfigWidget::slotDial() {
     DialDialog dial( this, "DialConfig", true );
     if(!m_telNumber->text().isEmpty()) {
         dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ \\.\\,]"), ""));
     }
     dial.showMaximized();
     if ( dial.exec() == QDialog::Accepted ) {
         m_telNumber->setText( dial.number() );
     }
 }
diff --git a/noncore/apps/opie-console/profileeditordialog.cpp b/noncore/apps/opie-console/profileeditordialog.cpp
index 36daaef..fd04b6b 100644
--- a/noncore/apps/opie-console/profileeditordialog.cpp
+++ b/noncore/apps/opie-console/profileeditordialog.cpp
@@ -1,239 +1,239 @@
 #include <qlayout.h>
 #include <qlineedit.h>
 #include <qlabel.h>
 #include <qmessagebox.h>
 #include <qstringlist.h>
 #include <qcombobox.h>
 #include <qcheckbox.h>
 #include <qscrollview.h>
 
 #include "metafactory.h"
 #include "profileeditordialog.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
             }
         }
     };
 }
 
 ProfileEditorDialog::ProfileEditorDialog( MetaFactory* fact,
                                           const Profile& prof )
     : QDialog(0, 0, TRUE), m_fact( fact ), m_prof( prof )
 {
     initUI();
 
         // Apply current profile
         // plugin_plugin->load(profile);
         // ... (reset profile name line edit etc.)
 }
 
 ProfileEditorDialog::ProfileEditorDialog( MetaFactory* fact )
     : QDialog(0, 0, TRUE), m_fact( fact )
 {
         // Default profile
         m_prof = Profile("New Profile", "serial", "default", Profile::Black, Profile::White, Profile::VT102);
 
         initUI();
 
         // Apply current profile
         // plugin_plugin->load(profile);
 }
 
 Profile ProfileEditorDialog::profile() const
 {
           return m_prof;
 }
 
 void ProfileEditorDialog::initUI()
 {
     m_con = m_term = m_key = 0l;
 
 
     QVBoxLayout *mainLayout = new QVBoxLayout( this );
     tabWidget = new OTabWidget( this );
     tabWidget->setTabStyle(OTabWidget::TextTab);
     mainLayout->add(tabWidget);
 
     /* base tabs */
     tabprof   = new QWidget(this);
     m_tabTerm = new QWidget(this);
     m_tabCon  = new QWidget(this);
     m_tabKey  = new QWidget(this);
 
     m_svCon = new QScrollView( m_tabCon );
     m_svCon->setResizePolicy( QScrollView::AutoOneFit );
-    m_svCon->setHScrollBarMode( QScrollView::AlwaysOff );
+    //m_svCon->setHScrollBarMode( QScrollView::AlwaysOff );
     m_svCon->setFrameShape( QFrame::NoFrame );
     m_svTerm = new QScrollView( m_tabTerm );
     m_svTerm->setResizePolicy( QScrollView::AutoOneFit );
-    m_svTerm->setHScrollBarMode( QScrollView::AlwaysOff );
+    //m_svTerm->setHScrollBarMode( QScrollView::AlwaysOff );
     m_svTerm->setFrameShape( QFrame::NoFrame );
 
     /* base layout for tabs */
     m_layCon  = new QHBoxLayout( m_tabCon , 2 );
     m_layTerm = new QHBoxLayout( m_tabTerm, 2 );
     m_layKey = new QHBoxLayout( m_tabKey, 2 );
 
     m_layCon->addWidget( m_svCon );
     m_layTerm->addWidget( m_svTerm );
 
     // profile tab
 
     QLabel *name = new QLabel(QObject::tr("Profile name"), tabprof);
     m_name = new QLineEdit(tabprof);
     QLabel *con = new QLabel(tr("Connection"), tabprof );
     QLabel *term = new QLabel(tr("Terminal"), tabprof );
     m_conCmb = new QComboBox( tabprof );
     m_termCmb = new QComboBox( tabprof );
     m_autoConnect = new QCheckBox(tr("Auto connect after load"), tabprof);
 
     // layouting
     QVBoxLayout *vbox3 = new QVBoxLayout(tabprof, 2);
     vbox3->add(name);
     vbox3->add(m_name);
     vbox3->add(con );
     vbox3->add(m_conCmb );
     vbox3->add(term );
     vbox3->add(m_termCmb );
     vbox3->add(m_autoConnect);
     vbox3->addStretch(1);
 
     m_showconntab = 0;
     tabWidget->addTab(tabprof, "", QObject::tr("Profile"));
     tabWidget->addTab(m_tabCon, "", QObject::tr("Connection"));
     tabWidget->addTab(m_tabTerm, "", QObject::tr("Terminal"));
     tabWidget->addTab(m_tabKey, "", QObject::tr("Special Keys"));
     tabWidget->setCurrentTab( tabprof );
 
 
     // fill the comboboxes
     QStringList list = m_fact->connectionWidgets();
     QStringList::Iterator it;
     for (it =list.begin(); it != list.end(); ++it ) {
         m_conCmb->insertItem( (*it) );
     }
     list = m_fact->terminalWidgets();
     for (it =list.begin(); it != list.end(); ++it ) {
         m_termCmb->insertItem( (*it) );
     }
 
     // load profile values
     m_name->setText(m_prof.name());
     slotConActivated(  m_fact->external(m_prof.ioLayerName()  ) );
     slotTermActivated( m_fact->external(m_prof.terminalName() ) );
     slotKeyActivated( "Default Keyboard" );
     setCurrent( m_fact->external(m_prof.ioLayerName() ), m_conCmb );
     setCurrent( m_fact->external(m_prof.terminalName() ), m_termCmb );
     m_autoConnect->setChecked(m_prof.autoConnect());
 
 
     // signal and slots
     connect(m_conCmb, SIGNAL(activated(const QString& ) ),
             this, SLOT(slotConActivated(const QString&) ) );
     connect(m_termCmb, SIGNAL(activated(const QString& ) ),
             this, SLOT(slotTermActivated(const QString& ) ) );
 
 }
 
 ProfileEditorDialog::~ProfileEditorDialog() {
 
 }
 void ProfileEditorDialog::accept()
 {
         if(profName().isEmpty())
         {
                 QMessageBox::information(this,
                         QObject::tr("Invalid profile"),
                         QObject::tr("Please enter a profile name."));
                 return;
         }
         // Save profile and plugin profile
         //if(plugin_plugin) plugin_plugin->save();
 
         // Save general values
         m_prof.setName( profName() );
         m_prof.setIOLayer( m_fact->internal(m_conCmb ->currentText()  ) );
         m_prof.setTerminalName( m_fact->internal(m_termCmb->currentText()  ) );
         m_prof.setAutoConnect( m_autoConnect->isChecked() );
 
         if (m_con )
             m_con->save( m_prof );
         if (m_term )
             m_term->save( m_prof );
         if (m_key)
             m_key->save( m_prof );
 
         QDialog::accept();
 }
 
 
 QString ProfileEditorDialog::profName()const
 {
         return m_name->text();
 }
 
 QCString ProfileEditorDialog::profType()const
 {
     /*QStringList w = m_fact->configWidgets();
         for(QStringList::Iterator it = w.begin(); it != w.end(); it++)
                 if(device_box->currentText() == m_fact->name((*it))) return (*it);
     */
     return QCString();
 }
 /*
  * we need to switch the widget
  */
 void ProfileEditorDialog::slotConActivated( const QString& str ) {
 
     delete m_con;
 
     m_con = m_fact->newConnectionPlugin( str, m_svCon->viewport() );
 
     if ( !m_con ) {
         m_con = new NoOptions( str, m_svCon->viewport(), "name");
     }
 
     // FIXME ugly hack right. Right solution would be to look into the layer and see if it
     // supports auto connect and then set it as prefered
     //if (  (  )->layer()->supports()[0] == 1 ) {
     if ( m_conCmb ->currentText() == tr("local Console") ) {
         m_autoConnect->setChecked( true );
     } else {
         m_autoConnect->setChecked( false );
     }
 
     m_con->load( m_prof );
     m_svCon->addChild( m_con );
 }
 
 
 /*
  * we need to switch the widget
  */
 void ProfileEditorDialog::slotTermActivated( const QString& str ) {
 
     delete m_term;
 
     m_term = m_fact->newTerminalPlugin( str, m_svTerm->viewport() );
 
     if (m_term) {
         m_term->load( m_prof );
         m_svTerm->addChild( m_term );
     }
 }
 
 void ProfileEditorDialog::slotKeyActivated(const QString &str) {
     delete m_key;
     m_key = m_fact->newKeyboardPlugin( str, m_tabKey );
 
     if (m_key) {
 
         m_key->load(m_prof);
         m_layKey->addWidget(m_key);
     }
 
 }