summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--noncore/net/wellenreiter/daemon/source/daemon.cc2
-rw-r--r--noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc74
-rw-r--r--noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh9
3 files changed, 53 insertions, 32 deletions
diff --git a/noncore/net/wellenreiter/daemon/source/daemon.cc b/noncore/net/wellenreiter/daemon/source/daemon.cc
index 8471efc..46a50ed 100644
--- a/noncore/net/wellenreiter/daemon/source/daemon.cc
+++ b/noncore/net/wellenreiter/daemon/source/daemon.cc
@@ -1,60 +1,60 @@
/*
* Startup functions of wellenreiter
*
* $Id$
*/
#include "config.hh"
#include "daemon.hh"
/* should be parsed from cfg-file */
#define MAXCHANNEL 13
-#define CHANINTERVAL 700000
+#define CHANINTERVAL 500000
/* Main function of wellenreiterd */
int main(int argc, char **argv)
{
int sock, maxfd, retval;
char buffer[WL_SOCKBUF];
struct pcap_pkthdr header;
struct sockaddr_in saddr;
pcap_t *handletopcap;
wl_cardtype_t cardtype;
pthread_t sub;
const unsigned char *packet;
fd_set rset;
fprintf(stderr, "wellenreiterd %s\n\n", VERSION);
fprintf(stderr, "(c) 2002 by M-M-M\n\n");
if(argc < 3)
usage();
/* Set sniffer device */
memset(cardtype.iface, 0, sizeof(cardtype.iface));
strncpy(cardtype.iface, (char *)argv[1], sizeof(cardtype.iface) - 1);
/* Set card type */
cardtype.type = atoi(argv[2]);
if(cardtype.type < 1 || cardtype.type > 4)
usage();
/* set card into monitor mode */
if(!card_into_monitormode(&handletopcap, cardtype.iface,
cardtype.type))
{
wl_logerr("Cannot initialize the wireless-card, aborting");
exit(EXIT_FAILURE);
}
wl_loginfo("Set card into monitor mode");
/* setup pcap */
if((handletopcap = pcap_open_live(cardtype.iface,
BUFSIZ, 1, 0, NULL)) == NULL)
{
wl_logerr("pcap_open_live() failed: %s", strerror(errno));
exit(EXIT_FAILURE);
}
#ifdef HAVE_PCAP_NONBLOCK
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
index 0c23922..9e0a772 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
+++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
@@ -1,192 +1,210 @@
/*
* Set card modes for sniffing
*
* $Id$
*/
#include "cardmode.hh"
#include "wl_log.hh"
/* main card into monitor function */
int card_into_monitormode (pcap_t **orighandle, char *device, int cardtype)
{
char CiscoRFMON[35] = "/proc/driver/aironet/";
FILE *CISCO_CONFIG_FILE;
/* Checks if we have a device to sniff on */
if(device == NULL)
{
wl_logerr("No device given");
return 0;
}
/* Setting the promiscous and up flag to the interface */
if (!card_set_promisc_up(device))
{
wl_logerr("Cannot set interface to promisc mode");
return 0;
}
wl_loginfo("Interface set to promisc mode");
/* Check the cardtype and executes the commands to go into monitor mode */
if (cardtype == CARD_TYPE_CISCO)
{
/* bring the sniffer into rfmon mode */
snprintf(CiscoRFMON, sizeof(CiscoRFMON) - 1, DEFAULT_PATH, device);
if((CISCO_CONFIG_FILE = fopen(CiscoRFMON,"w")) == NULL)
{
wl_logerr("Cannot open config file: %s", strerror(errno));
return 0;
}
fputs ("Mode: r",CISCO_CONFIG_FILE);
fputs ("Mode: y",CISCO_CONFIG_FILE);
fputs ("XmitPower: 1",CISCO_CONFIG_FILE);
fclose(CISCO_CONFIG_FILE);
}
else if (cardtype == CARD_TYPE_NG)
{
char wlanngcmd[62];
- snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "%s %s lnxreq_wlansniff channel=1 enable=true", WLANCTL_PATH, device);
+ snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=true", device, 1);
if (system(wlanngcmd) != 0)
{
wl_logerr("Could not set %s in raw mode, check cardtype", device);
return 0;
}
}
else if (cardtype == CARD_TYPE_HOSTAP)
{
wl_logerr("Got a host-ap card, nothing is implemented now");
char hostapcmd[250];
- snprintf(hostapcmd, sizeof(hostapcmd) -1, "%s %s monitor 2", IWPRIV_PATH, device);
+ snprintf(hostapcmd, sizeof(hostapcmd) -1, "$(which iwpriv) %s monitor 2 %d", device,1);
if (system(hostapcmd) !=0)
{
wl_logerr("Could not set %s in raw mode, check cardtype", device);
return 0;
}
}
- else if (cardtype == CARD_TYPE_ORINOCCO)
+ else if (cardtype == CARD_TYPE_ORINOCCO || cardtype == CARD_TYPE_HOSTAP)
{
- char lucentcmd[62];
- snprintf(lucentcmd, sizeof(lucentcmd) - 1, "$(which iwpriv) %s monitor 2 %d", device, 1);
- if (system(lucentcmd) != 0)
- {
- wl_logerr("Could not set %s in raw mode, check cardtype", device);
- return 0;
+ if (!card_set_channel (device, 1, CARD_TYPE_ORINOCCO))
+ {
+ wl_logerr("Could not set %s in raw mode, check cardtype", device);
+ return 0;
}
else
{
- wl_loginfo("Successfully set %s into raw mode",device);
+ wl_loginfo("Successfully set %s into raw mode",device);
}
}
/* Setting the promiscous and up flag to the interface */
if (!card_check_rfmon_datalink(device))
{
wl_logerr("Cannot set interface to rfmon mode");
return 0;
}
else
{
wl_loginfo("Interface set to rfmon mode");
}
return 1;
}
/* Check card is in the rfmon mode */
int card_check_rfmon_datalink (char *device)
{
int datalinktype=0;
pcap_t *phandle;
phandle = pcap_open_live(device, 65,0,0,NULL);
datalinktype = pcap_datalink (phandle);
pcap_close(phandle);
if (datalinktype != DLT_IEEE802_11) /* Rawmode is IEEE802_11 */
{
return 0;
}
else
{
wl_loginfo("Your successfully listen on %s in 802.11 raw mode", device);
return 1;
}
}
/* Set card into promisc mode */
int card_set_promisc_up (const char *device)
{
int err;
/* First generate a socket to use with iocalls */
int fd = socket(AF_INET, SOCK_DGRAM, 0);
if (fd < 0)
{
/* In case of an error */
perror("socket");
return 0;
}
/* Fill an empty an interface structure with the right flags (UP and Promsic) */
struct ifreq ifr;
strncpy(ifr.ifr_name, device,10);
ifr.ifr_flags = IFF_UP + IFF_PROMISC;
err = ioctl(fd, SIOCSIFFLAGS, &ifr);
if (err < 0)
{
perror("Could not access the interface, ");
return 0;
}
/* Get the informations back from the interface to check if the flags are correct */
strncpy(ifr.ifr_name, device,10);
ioctl(fd, SIOCGIFFLAGS, &ifr);
if (err < 0)
{
perror("Could not access the interface, ");
return 0;
}
if(ifr.ifr_flags && IFF_UP)
{
printf("%s is ok\n", device);
return 1;
}
else
{
printf("%s flags could not be set", device);
return 0;
}
}
/* Set channel (Wireless frequency) of the device */
int card_set_channel (const char *device, int channel, int cardtype)
{
if (cardtype == CARD_TYPE_CISCO)
{
/* Cisco cards don't need channelswitching */
return 1;
}
/* If it is a lucent orinocco card */
- else if (cardtype == CARD_TYPE_ORINOCCO)
+ else if (cardtype == CARD_TYPE_ORINOCCO || cardtype == CARD_TYPE_HOSTAP)
{
- char lucentreset[63];
- char lucentcmd[62];
- snprintf(lucentreset, sizeof(lucentreset) -1,"$(which iwpriv) %s force_reset", device);
- if (system(lucentreset) != 0)
- {
- wl_logerr("Could not reset the card %s",device);
- return 0;
- }
- snprintf(lucentcmd, sizeof(lucentcmd) - 1, "$(which iwpriv) %s monitor 2 %d", device, channel);
- if (system(lucentcmd) != 0)
- {
- wl_logerr("Could not set %s in raw mode, check cardtype", device);
- return 0;
- }
- wl_loginfo("Channel %d set on interface %s",channel,device);
- return 1;
+ int fd;
+ //Wireless tools structure for the iocalls
+ struct iwreq ireq;
+ int *ptr;
+ /* Socket needed to use the iocall to */
+ fd = socket(AF_INET, SOCK_STREAM, 0);
+ if ( fd == -1 ) {
+ return -1;
+ }
+ ptr = (int *) ireq.u.name;
+ // This is the monitor mode for 802.11 non-prism header
+ ptr[0] = 2;
+ ptr[1] = channel;
+ strcpy(ireq.ifr_ifrn.ifrn_name, device);
+ if (ioctl( fd, SIOCIWFIRSTPRIV + 0x8, &ireq)==0)
+ {
+ /* All was fine... */
+ // close(fd);
+ wl_loginfo("Set channel %d on interface %s",channel, device);
+ return 1;
+ }
+ else
+ { /* iocall does not work */
+ wl_logerr("Could not set channel %d on %s, check cardtype",channel, device);
+ return 0;
+ }
}
-
+ else if (cardtype == CARD_TYPE_NG)
+ {
+ char wlanngcmd[62];
+ snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=true", device, channel);
+ if (system(wlanngcmd) != 0)
+ {
+ wl_logerr("Could not set channel %d on %s, check cardtype",channel, device);
+ return 0;
+ }
+
+ }
/* For undefined situations */
return 0;
}
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
index 3a1991b..242d8c5 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
+++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
@@ -1,44 +1,47 @@
/* $Id$ */
#ifndef CARDMODE_HH
#define CARDMODE_HH
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <sys/ioctl.h>
#include <linux/if.h>
+#include <linux/wireless.h>
+
+#ifndef SIOCIWFIRSTPRIV
+#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
+#endif
+
extern "C"
{
#include <net/bpf.h>
#include <pcap.h>
}
/* Defines, used for the card setup */
#define DEFAULT_PATH "/proc/driver/aironet/%s/Config"
#define CISCO_STATUS "/proc/driver/aironet/%s/Status"
#define CARD_TYPE_CISCO 1
#define CARD_TYPE_NG 2
#define CARD_TYPE_HOSTAP 3
#define CARD_TYPE_ORINOCCO 4
/* only for now, until we have the daemon running */
/*the config file should provide these information */
#define CARD_TYPE CARD_TYPE_HOSTAP
-#define SBIN_PATH "/sbin/ifconfig %s promisc up"
-#define WLANCTL_PATH "/sbin/wlanctl-ng"
-#define IWPRIV_PATH "/sbin/iwpriv"
/* Prototypes */
int card_check_rfmon_datalink (char *device);
int card_into_monitormode (pcap_t **, char *, int);
int card_set_promisc_up (const char *);
int card_set_channel (const char *device, int channel,int cardtype);
#endif /* CARDMODE_HH */