1 files changed, 37 insertions, 2 deletions

diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index 8369f54..7302d2c 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -69,96 +69,127 @@ struct z_button z_buttons [] = {
     "addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
     "devicebuttons/z_home",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
     "devicebuttons/z_menu",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
     "devicebuttons/z_mail",
     "opiemail", "raise()",
     "opiemail", "newMail()" },
 };
 
 struct z_button z_buttons_c700 [] = {
     { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"),
     "devicebuttons/z_calendar",
     "datebook", "nextView()",
     "today", "raise()" },
     { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
     "devicebuttons/z_contact",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
     "devicebuttons/z_home",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
     "devicebuttons/z_menu",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
     "devicebuttons/z_mail",
     "opiemail", "raise()",
     "opiemail", "newMail()" },
 
     { Qt::Key_F15, QT_TRANSLATE_NOOP("Button", "Hinge1"),
     "devicebuttons/z_hinge1",
     "QPE/Rotation", "rotateDefault()",0},
     { Qt::Key_F16, QT_TRANSLATE_NOOP("Button", "Hinge2"),
     "devicebuttons/z_hinge2",
     "QPE/Rotation", "rotateDefault()",0},
     { Qt::Key_F17, QT_TRANSLATE_NOOP("Button", "Hinge3"),
     "devicebuttons/z_hinge3",
     "QPE/Rotation", "rotateDefault()",0},
 };
 
+struct z_button z_buttons_6000 [] = {
+    { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"),
+    "devicebuttons/z_calendar",
+    "datebook", "nextView()",
+    "today", "raise()" },
+    { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
+    "devicebuttons/z_contact",
+    "addressbook", "raise()",
+    "addressbook", "beamBusinessCard()" },
+    { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
+    "devicebuttons/z_home",
+    "QPE/Launcher", "home()",
+    "buttonsettings", "raise()" },
+    { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
+    "devicebuttons/z_menu",
+    "QPE/TaskBar", "toggleMenu()",
+    "QPE/TaskBar", "toggleStartMenu()" },
+    { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
+    "devicebuttons/z_mail",
+    "opiemail", "raise()",
+    "opiemail", "newMail()" },
+    { Qt::Key_F15, QT_TRANSLATE_NOOP("Button", "Rotate Button"),
+    "devicebuttons/z_rotate",
+    0,
+    "QPE/Rotation", "rotateDefault()" },
+    { Qt::Key_F24, QT_TRANSLATE_NOOP("Button", "Record Button"),
+    "devicebuttons/z_hinge3",
+    "QPE/VMemo", "toggleRecord()",
+    "sound", "raise()" },
+};
+
 // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus
 //       class up into individual classes. We would need three classes
 //
 //       Zaurus-Collie (SA-model  w/ 320x240 lcd, for SL5500 and SL5000)
 //       Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600)
 //       Zaurus-Corgi  (PXA-model w/ 640x480 lcd, for C700, C750, C760, C860, C3000, C1000, C3100)
 //       Zaurus-Tosa   (PXA-model w/ 480x640 lcd, for SL6000)
 
 void Zaurus::init(const QString& cpu_info)
 {
     // Set the time to wait until the system is really suspended
     // the delta between apm --suspend and sleeping
     setAPMTimeOut( 15000 );
 
     // generic distribution code already scanned /etc/issue at that point -
     // embedix releases contain "Embedix <version> | Linux for Embedded Devices"
     if ( d->m_sysverstr.contains( "embedix", false ) )
     {
         d->m_vendorstr = "Sharp";
         d->m_vendor = Vendor_Sharp;
         d->m_systemstr = "Zaurus";
         d->m_system = System_Zaurus;
         m_embedix = true;
     }
     else
     {
         d->m_vendorstr = "OpenZaurus Team";
         d->m_systemstr = "OpenZaurus";
         d->m_system = System_OpenZaurus;
         // sysver already gathered
 
         // OpenZaurus sometimes uses the 2.4 (embedix) kernel, check if this is one
         FILE *uname = popen("uname -r", "r");
         QFile f;
         QString line;
         if ( f.open(IO_ReadOnly, uname) ) {
             QTextStream ts ( &f );
             line = ts.readLine();
             m_embedix = line.startsWith( "2.4." );
             f.close();
         }
         pclose(uname);
     }
 
     // check the Zaurus model
     QString model;
     int loc = cpu_info.find( ":" );
     if ( loc != -1 )
@@ -210,102 +241,106 @@ void Zaurus::init(const QString& cpu_info)
             break;
         default:
             m_backlightdev = "/sys/class/backlight/corgi-bl/";
     }
 
     // set initial rotation
     switch( d->m_model )
     {
         case Model_Zaurus_SL6000: // fallthrough
         case Model_Zaurus_SLA300:
             d->m_rotation = Rot0;
             break;
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC1000: // fallthrough
         case Model_Zaurus_SLC7x0:
             d->m_rotation = rotation();
             d->m_direction = direction();
             break;
         case Model_Zaurus_SLB600: // fallthrough
         case Model_Zaurus_SL5000: // fallthrough
         case Model_Zaurus_SL5500: // fallthrough
         default:
             d->m_rotation = Rot270;
     }
 
     // set default qte driver
     switch( d->m_model )
     {
         case Model_Zaurus_SLC7x0:
             d->m_qteDriver = "W100";
             break;
         default:
             d->m_qteDriver = "Transformed";
     }
 
     m_leds[0] = Led_Off;
 
     if ( m_embedix )
         qDebug( "Zaurus::init() - Using the 2.4 Embedix HAL on a %s", (const char*) d->m_modelstr );
     else
         qDebug( "Zaurus::init() - Using the 2.6 OpenZaurus HAL on a %s", (const char*) d->m_modelstr );
 }
 
 void Zaurus::initButtons()
 {
     if ( d->m_buttons )
         return;
 
-
     d->m_buttons = new QValueList <ODeviceButton>;
 
     struct z_button * pz_buttons;
     int buttoncount;
-    switch ( d->m_model ) {
+    switch ( d->m_model )
+    {
+        case Model_Zaurus_SL6000:
+            pz_buttons = z_buttons_6000;
+            buttoncount = ARRAY_SIZE(z_buttons_6000);
+            break;
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC1000: // fallthrough
         case Model_Zaurus_SLC7x0:
             if ( isQWS( ) ) {
                 addPreHandler(this); // hinge-sensor-handler
             }
             pz_buttons = z_buttons_c700;
             buttoncount = ARRAY_SIZE(z_buttons_c700);
             break;
         default:
             pz_buttons = z_buttons;
             buttoncount = ARRAY_SIZE(z_buttons);
             break;
     }
 
     for ( int i = 0; i < buttoncount; i++ ) {
         struct z_button *zb = pz_buttons + i;
         ODeviceButton b;
 
         b.setKeycode( zb->code );
         b.setUserText( QObject::tr( "Button", zb->utext ));
         b.setPixmap( OResource::loadPixmap( zb->pix ));
         b.setFactoryPresetPressedAction( OQCopMessage( makeChannel ( zb->fpressedservice ), zb->fpressedaction ));
         b.setFactoryPresetHeldAction( OQCopMessage( makeChannel ( zb->fheldservice ), zb->fheldaction ));
         d->m_buttons->append( b );
     }
 
     reloadButtonMapping();
 }
 
 
 
 typedef struct sharp_led_status {
     int which;   /* select which LED status is wanted. */
     int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 void Zaurus::buzzer( int sound )
 {
 #ifndef QT_NO_SOUND
     Sound *snd = 0;
 
     // All devices except SL5500 have a DSP device
     if ( d->m_model != Model_Zaurus_SL5000
       && d->m_model != Model_Zaurus_SL5500 ) {
 
         switch ( sound ){
         case SHARP_BUZ_TOUCHSOUND: {