| -rw-r--r-- | libopie/odevice.cpp | 12 | ||||
| -rw-r--r-- | libopie/odevice.h | 1 |
2 files changed, 8 insertions, 5 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index 160568b..f808960 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -511,114 +511,118 @@ bool ODevice::suspend ( ) res = ( ::system ( "apm --suspend" ) == 0 ); // This is needed because the iPAQ apm implementation is asynchronous and we // can not be sure when exactly the device is really suspended // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists. if ( res ) { do { // wait at most 1.5 sec: either suspend didn't work or the device resumed ::usleep ( 200 * 1000 ); ::gettimeofday ( &tvn, 0 ); } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 ); } return res; } //#include <linux/fb.h> better not rely on kernel headers in userspace ... #define FBIOBLANK OD_IO( 'F', 0x11 ) // 0x4611 /* VESA Blanking Levels */ #define VESA_NO_BLANKING 0 #define VESA_VSYNC_SUSPEND 1 #define VESA_HSYNC_SUSPEND 2 #define VESA_POWERDOWN 3 /** * This sets the display on or off */ bool ODevice::setDisplayStatus ( bool on ) { qDebug("ODevice::setDisplayStatus(%d)", on); if ( d-> m_model == Model_Unknown ) return false; bool res = false; int fd; if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) { res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 ); ::close ( fd ); } return res; } /** * This sets the display brightness + * + * @param p The brightness to be set on a scale from 0 to 255 * @return success or failure */ bool ODevice::setDisplayBrightness ( int p) { Q_UNUSED( p ) return false; } /** - * @return return the max value for the brightness settings slider + * @return returns the number of steppings on the brightness slider + * in the Light-'n-Power settings. */ int ODevice::displayBrightnessResolution ( ) const { return 16; } /** * This sets the display contrast + * @param p The contrast to be set on a scale from 0 to 255 * @return success or failure */ bool ODevice::setDisplayContrast ( int p) { Q_UNUSED( p ) return false; } /** * @return return the max value for the brightness settings slider * or 0 if the device doesn't support setting of a contrast */ int ODevice::displayContrastResolution ( ) const { return 0; } /** * This returns the vendor as string * @return Vendor as QString */ QString ODevice::vendorString ( ) const { return d-> m_vendorstr; } /** * This returns the vendor as one of the values of OVendor * @return OVendor */ OVendor ODevice::vendor ( ) const { return d-> m_vendor; } /** * This returns the model as a string * @return A string representing the model */ QString ODevice::modelString ( ) const { return d-> m_modelstr; } /** * This does return the OModel used */ OModel ODevice::model ( ) const @@ -2025,74 +2029,74 @@ bool Ramses::setDisplayStatus(bool on) return res; #else return true; #endif } /* * We get something between 0..255 into us */ bool Ramses::setDisplayBrightness(int bright) { qDebug("Ramses::setDisplayBrightness(%d)", bright); bool res = false; int fd; // pwm1 brighness: 20 steps 500..0 (dunkel->hell) if (bright > 255 ) bright = 255; if (bright < 0) bright = 0; bright = 500-(bright * 500 / 255); if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) { qDebug(" %d -> pwm1", bright); char writeCommand[100]; const int count = sprintf(writeCommand, "%d\n", bright); res = (::write(fd, writeCommand, count) != -1); ::close(fd); } else { qWarning("no write"); } return res; } int Ramses::displayBrightnessResolution() const { return 32; } bool Ramses::setDisplayContrast(int contr) { qDebug("Ramses::setDisplayContrast(%d)", contr); bool res = false; int fd; - // pwm0 contrast: 35 steps 65..100 (dunkel->hell) + // pwm0 contrast: 20 steps 79..90 (dunkel->hell) if (contr > 255 ) contr = 255; if (contr < 0) contr = 0; - contr = 65 + (contr * 350 / 255); + contr = 90 - (contr * 20 / 255); if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) { qDebug(" %d -> pwm0", contr); char writeCommand[100]; const int count = sprintf(writeCommand, "%d\n", contr); res = (::write(fd, writeCommand, count) != -1); res = true; ::close(fd); } else { qWarning("no write"); } return res; } int Ramses::displayContrastResolution() const { - return 32; + return 20; } diff --git a/libopie/odevice.h b/libopie/odevice.h index 6c4830e..0974e8d 100644 --- a/libopie/odevice.h +++ b/libopie/odevice.h @@ -84,97 +84,96 @@ enum OVendor { }; /** * The System used */ enum OSystem { System_Unknown, System_Familiar, System_Zaurus, System_OpenZaurus }; enum OLedState { Led_Off, Led_On, Led_BlinkSlow, Led_BlinkFast }; enum OLed { Led_Mail, Led_Power, Led_BlueTooth }; enum OHardKey { HardKey_Datebook = Qt::Key_F9, HardKey_Contacts = Qt::Key_F10, HardKey_Menu = Qt::Key_F11, HardKey_Home = Qt::Key_F12, HardKey_Mail = Qt::Key_F13, HardKey_Record = Qt::Key_F24, HardKey_Suspend = Qt::Key_F34, HardKey_Backlight = Qt::Key_F35, }; enum ODirection { CW = 0, CCW = 1, Flip = 2, }; /** * A singleton which gives informations about device specefic option * like the Hardware used, LEDs, the Base Distribution and * hardware key mappings. * - * * @short A small class for device specefic options * @see QObject * @author Robert Griebl * @version 1.0 */ class ODevice : public QObject { Q_OBJECT private: /* disable copy */ ODevice ( const ODevice & ); protected: ODevice ( ); virtual void init ( ); virtual void initButtons ( ); ODeviceData *d; public: // sandman do we want to allow destructions? -zecke? virtual ~ODevice ( ); static ODevice *inst ( ); // information QString modelString ( ) const; OModel model ( ) const; inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); } QString vendorString ( ) const; OVendor vendor ( ) const; QString systemString ( ) const; OSystem system ( ) const; QString systemVersionString ( ) const; Transformation rotation ( ) const; ODirection direction ( ) const; // system virtual bool setSoftSuspend ( bool on ); virtual bool suspend ( ); |