| -rw-r--r-- | libopie2/opiecore/device/odevice.cpp | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp index ec861ee..b5ae4e5 100644 --- a/libopie2/opiecore/device/odevice.cpp +++ b/libopie2/opiecore/device/odevice.cpp @@ -271,580 +271,582 @@ bool ODevice::suspend() if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; ODevice::sendSuspendmsg(); struct timeval tvs, tvn; ::gettimeofday ( &tvs, 0 ); ::sync(); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); // This is needed because the iPAQ apm implementation is asynchronous and we // can not be sure when exactly the device is really suspended // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists. if ( res ) { do { // wait at most 1.5 sec: either suspend didn't work or the device resumed ::usleep ( 200 * 1000 ); ::gettimeofday ( &tvn, 0 ); } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 ); } return res; } //#include <linux/fb.h> better not rely on kernel headers in userspace ... #define FBIOBLANK OD_IO( 'F', 0x11 ) // 0x4611 /* VESA Blanking Levels */ #define VESA_NO_BLANKING 0 #define VESA_VSYNC_SUSPEND 1 #define VESA_HSYNC_SUSPEND 2 #define VESA_POWERDOWN 3 /** * This sets the display on or off */ bool ODevice::setDisplayStatus ( bool on ) { qDebug("ODevice::setDisplayStatus(%d)", on); if ( d->m_model == Model_Unknown ) return false; bool res = false; int fd; #ifdef QT_QWS_DEVFS if (( fd = ::open ( "/dev/fb/0", O_RDWR )) >= 0 ) { #else if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) { #endif res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 ); ::close ( fd ); } return res; } /** * This sets the display brightness * * @param p The brightness to be set on a scale from 0 to 255 * @return success or failure */ bool ODevice::setDisplayBrightness ( int p) { Q_UNUSED( p ) return false; } /** * * @return Returns the number of steppings on the brightness slider * in the Light-'n-Power settings. Values smaller zero and bigger * than 255 do not make sense. * * \sa QSlider::setLineStep * \sa QSlider::setPageStep */ int ODevice::displayBrightnessResolution() const { return 16; } /** * This sets the display contrast * @param p The contrast to be set on a scale from 0 to 255 * @return success or failure */ bool ODevice::setDisplayContrast ( int p) { Q_UNUSED( p ) return false; } /** * @return return the max value for the brightness settings slider * or 0 if the device doesn't support setting of a contrast */ int ODevice::displayContrastResolution() const { return 0; } /** * This returns the vendor as string * @return Vendor as QString */ QString ODevice::vendorString() const { return d->m_vendorstr; } /** * This returns the vendor as one of the values of OVendor * @return OVendor */ OVendor ODevice::vendor() const { return d->m_vendor; } /** * This returns the model as a string * @return A string representing the model */ QString ODevice::modelString() const { return d->m_modelstr; } /** * This does return the OModel used */ OModel ODevice::model() const { return d->m_model; } /** * This does return the systen name */ QString ODevice::systemString() const { return d->m_systemstr; } /** * Return System as OSystem value */ OSystem ODevice::system() const { return d->m_system; } /** * @return the version string of the base system */ QString ODevice::systemVersionString() const { return d->m_sysverstr; } /** * @return the current Transformation */ Transformation ODevice::rotation() const { return d->m_rotation; } /** * @return the current rotation direction */ ODirection ODevice::direction() const { return d->m_direction; } /** * This plays an alarm sound */ void ODevice::playAlarmSound() { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); if ( snd. isFinished()) snd. play(); #endif } /** * This plays a key sound */ void ODevice::playKeySound() { #ifndef QT_NO_SOUND static Sound snd ( "keysound" ); if ( snd. isFinished()) snd. play(); #endif } /** * This plays a touch sound */ void ODevice::playTouchSound() { #ifndef QT_NO_SOUND static Sound snd ( "touchsound" ); if ( snd. isFinished()) snd. play(); #endif } /** * This method will return a list of leds * available on this device * @return a list of LEDs. */ QValueList <OLed> ODevice::ledList() const { return QValueList <OLed>(); } /** * This does return the state of the LEDs */ QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const { return QValueList <OLedState>(); } /** * @return the state for a given OLed */ OLedState ODevice::ledState ( OLed /*which*/ ) const { return Led_Off; } /** * Set the state for a LED * @param which Which OLed to use * @param st The state to set * @return success or failure */ bool ODevice::setLedState ( OLed which, OLedState st ) { Q_UNUSED( which ) Q_UNUSED( st ) return false; } /** * @return if the device has a light sensor */ bool ODevice::hasLightSensor() const { return false; } /** * @return a value from the light sensor */ int ODevice::readLightSensor() { return -1; } /** * @return the light sensor resolution */ int ODevice::lightSensorResolution() const { return 0; } /** * @return if the device has a hinge sensor */ bool ODevice::hasHingeSensor() const { return false; } /** * @return a value from the hinge sensor */ OHingeStatus ODevice::readHingeSensor() { return CASE_UNKNOWN; } /** * @return a list with CPU frequencies supported by the hardware */ const QStrList &ODevice::allowedCpuFrequencies() const { return *d->m_cpu_frequencies; } /** * Set desired CPU frequency * * @param index index into d->m_cpu_frequencies of the frequency to be set */ bool ODevice::setCurrentCpuFrequency(uint index) { if (index >= d->m_cpu_frequencies->count()) return false; char *freq = d->m_cpu_frequencies->at(index); qWarning("set freq to %s", freq); int fd; if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) { char writeCommand[50]; const int count = sprintf(writeCommand, "%s\n", freq); int res = (::write(fd, writeCommand, count) != -1); ::close(fd); return res; } return false; } /** * @return a list of hardware buttons */ const QValueList <ODeviceButton> &ODevice::buttons() { initButtons(); return *d->m_buttons; } /** * @return The amount of time that would count as a hold */ uint ODevice::buttonHoldTime() const { return d->m_holdtime; } /** * This method return a ODeviceButton for a key code * or 0 if no special hardware button is available for the device * * @return The devicebutton or 0l * @see ODeviceButton */ const ODeviceButton *ODevice::buttonForKeycode ( ushort code ) { initButtons(); for ( QValueListConstIterator<ODeviceButton> it = d->m_buttons->begin(); it != d->m_buttons->end(); ++it ) { if ( (*it). keycode() == code ) return &(*it); } return 0; } void ODevice::reloadButtonMapping() { initButtons(); Config cfg ( "ButtonSettings" ); for ( uint i = 0; i < d->m_buttons->count(); i++ ) { ODeviceButton &b = ( *d->m_buttons ) [i]; QString group = "Button" + QString::number ( i ); QCString pch, hch; QCString pm, hm; QByteArray pdata, hdata; if ( cfg. hasGroup ( group )) { cfg. setGroup ( group ); pch = cfg. readEntry ( "PressedActionChannel" ). latin1(); pm = cfg. readEntry ( "PressedActionMessage" ). latin1(); // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" )); hch = cfg. readEntry ( "HeldActionChannel" ). latin1(); hm = cfg. readEntry ( "HeldActionMessage" ). latin1(); // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" )); } b. setPressedAction ( OQCopMessage ( pch, pm, pdata )); b. setHeldAction ( OQCopMessage ( hch, hm, hdata )); } } void ODevice::remapPressedAction ( int button, const OQCopMessage &action ) { initButtons(); QString mb_chan; if ( button >= (int) d->m_buttons->count()) return; ODeviceButton &b = ( *d->m_buttons ) [button]; b. setPressedAction ( action ); mb_chan=b. pressedAction(). channel(); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan); buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction(). message()); // buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction(). data())); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::remapHeldAction ( int button, const OQCopMessage &action ) { initButtons(); if ( button >= (int) d->m_buttons->count()) return; ODeviceButton &b = ( *d->m_buttons ) [button]; b. setHeldAction ( action ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction(). channel()); buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction(). message()); // buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction(). data())); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } /** * @internal */ void ODevice::virtual_hook(int, void* ){ } /** * \brief Send a QCOP Message before suspending * * Sends a QCOP message to channel QPE/System * with the message "aboutToSuspend()" if this * is the windowing server. * * Call this in your custom \sa suspend() Method * before going to suspend. * */ void ODevice::sendSuspendmsg() { if ( isQWS() ) return; QCopEnvelope ( "QPE/System", "aboutToSuspend()" ); } /** * \brief Prepend the QWSServer::KeyboardFilter to the list of installed KeyFilters * * Prepend a QWSServer::KeyboardFilter to the List of Keyboard * Filters. This function is the only way to prepend a KeyFilter. * * @param aFilter The KeyFilter to be prepended to the list of filters * * @see Opie::Core::OKeyFilter * @see Opie::Core::OKeyFilter::inst() */ void ODevice::addPreHandler(QWSServer::KeyboardFilter*aFilter) { Opie::Core::OKeyFilter::inst()->addPreHandler(aFilter); } /** * \brief Remove the QWSServer::KeyboardFilter in the param from the list * * Remove the QWSServer::KeyboardFilter \par aFilter from the List * of Keyfilters. Call this when you delete the KeyFilter! * * @param aFilter The filter to be removed from the Opie::Core::OKeyFilter * @see Opie::Core::ODevice::addPreHandler */ void ODevice::remPreHandler(QWSServer::KeyboardFilter*aFilter) { Opie::Core::OKeyFilter::inst()->remPreHandler(aFilter); } /** * @internal * * @see changeMixerForAlarm */ void ODevice::playingStopped() { - const_cast<QObject*>(sender())->disconnect( this ); + if ( sender() ) + const_cast<QObject*>(sender())->disconnect( this ); + #ifndef QT_NO_SOUND if ( d->m_sound >= 0 ) { ::ioctl ( d->m_sound, MIXER_WRITE( d->m_mixer ), &d->m_vol ); ::close ( d->m_sound ); } #endif } /** * \brief Change the Volume for the Alarm and set it back after playing is finished * * If you play an Alarm Sound you might want to change the Mixer to * full volume and ignore the user setting. After it \sa Sound::isFinished * you would turn the volume back to the user preference. * The problem is that we used to enter the event loop while waiting * for the sound to be finished triggering all kind of reentrance * problems what a library shouldn't introduce. * Instead of manually waiting for the sound to be finished use * this Method and it will automatically restore the Mixer to * the user configuration after the sound finished playing. * * Note: The onwership of \param snd is not transfered and playing * is not started in this method. If 'snd' gets deleted before * playing is finished the volume doesn't get set back to * the user preference! * * \code * static Sound snd("alarm"); * if(!snd.isFinished()) * return; * * changeMixerForAlarm( my_channel, "/dev/mixer", &snd ); * snd.play() * \endcode * * * * @param mixer The mixer number/channel to use * @param file The file name. If you convert from QString use QFile::encodeName * @param snd The sound to wait for finishing * */ void ODevice::changeMixerForAlarm( int mixer, const char* file, Sound *snd ) { #ifndef QT_NO_SOUND if (( d->m_sound = ::open ( file, O_RDWR )) >= 0 ) { if ( ::ioctl ( d->m_sound, MIXER_READ( mixer ), &d->m_vol ) >= 0 ) { Config cfg ( "qpe" ); cfg. setGroup ( "Volume" ); int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 ); if ( volalarm < 0 ) volalarm = 0; else if ( volalarm > 100 ) volalarm = 100; volalarm |= ( volalarm << 8 ); if ( ::ioctl ( d->m_sound, MIXER_WRITE( mixer ), &volalarm ) >= 0 ) register_qpe_sound_finished(snd, this, SLOT(playingStopped())); } d->m_mixer = mixer; } #endif } } } |