3 files changed, 52 insertions, 18 deletions

diff --git a/library/libqpe1.control b/library/libqpe1.control
index 6743e28..94992b1 100644
--- a/library/libqpe1.control
+++ b/library/libqpe1.control
@@ -1,8 +1,8 @@
 Files: $OPIEDIR/lib/libqpe.so.1 $OPIEDIR/lib/libqpe.so.1.5 $OPIEDIR/lib/libqpe.so.1.5.0
 Priority: required
 Section: opie/system
 Maintainer:  Project Opie <opie@handhelds.org>
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION.1
-Depends: libqt2-emb (>=$QTE_VERSION), libqt2-emb-fonts (>=$QTE_VERSION)
+Depends: libqt2-emb (>=2.3.4-beta4), libqt2-emb-fonts (>=$QTE_VERSION)
 Description: libqpe, base qtopia/opie library.
diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp
index b21428a..95c4a1b 100644
--- a/library/qpeapplication.cpp
+++ b/library/qpeapplication.cpp
@@ -557,1024 +557,1029 @@ QPEApplication::QPEApplication( int & argc, char **argv, Type t )
                 QDataStream ds( &f );
                 QCString channel, message;
                 QByteArray data;
                 while ( !ds.atEnd() ) {
                         ds >> channel >> message >> data;
                         d->enqueueQCop( channel, message, data );
                 }
 
                 flock( f.handle(), LOCK_UN );
                 f.close();
                 f.remove();
         }
 
         for ( int a = 0; a < argc; a++ ) {
                 if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) {
                         argv[ a ] = argv[ a + 1 ];
                         a++;
                         d->preloaded = TRUE;
                         argc -= 1;
                 }
                 else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) {
                         argv[ a ] = argv[ a + 1 ];
                         a++;
                         d->preloaded = TRUE;
                         d->forceshow = TRUE;
                         argc -= 1;
                 }
         }
 
         /* overide stored arguments */
         setArgs( argc, argv );
 
 #endif
 
         //  qwsSetDecoration( new QPEDecoration() );
 
 #ifndef QT_NO_TRANSLATION
 
         QStringList langs = Global::languageList();
         for ( QStringList::ConstIterator it = langs.begin(); it != langs.end(); ++it ) {
                 QString lang = *it;
 
                 QTranslator * trans;
                 QString tfn;
 
                 trans = new QTranslator( this );
                 tfn = qpeDir() + "/i18n/" + lang + "/libqpe.qm";
                 if ( trans->load( tfn ) )
                         installTranslator( trans );
                 else
                         delete trans;
 
                 trans = new QTranslator( this );
                 tfn = qpeDir() + "/i18n/" + lang + "/" + d->appName + ".qm";
                 if ( trans->load( tfn ) )
                         installTranslator( trans );
                 else
                         delete trans;
 
                 //###language/font hack; should look it up somewhere
 #ifdef QWS
 
                 if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) {
                         QFont fn = FontManager::unicodeFont( FontManager::Proportional );
                         setFont( fn );
                 }
 #endif
 
         }
 #endif
 
         applyStyle();
 
         if ( type() == GuiServer ) {
                 setVolume();
         }
 
         installEventFilter( this );
 
         QPEMenuToolFocusManager::initialize();
 
 #ifdef QT_NO_QWS_CURSOR
         // if we have no cursor, probably don't want tooltips
         QToolTip::setEnabled( FALSE );
 #endif
 }
 
 static QPtrDict<void>* inputMethodDict = 0;
 static void createInputMethodDict()
 {
         if ( !inputMethodDict )
                 inputMethodDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the currently set hint to the system as to whether
   widget \a w has any use for text input methods.
 
 
   \sa setInputMethodHint() InputMethodHint
 */
 QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w )
 {
         if ( inputMethodDict && w )
                 return ( InputMethodHint ) ( int ) inputMethodDict->find( w );
         return Normal;
 }
 
 /*!
   \enum QPEApplication::InputMethodHint
 
   \value Normal the application sometimes needs text input (the default).
   \value AlwaysOff the application never needs text input.
   \value AlwaysOn the application always needs text input.
 */
 
 /*!
   Hints to the system that widget \a w has use for text input methods
   as specified by \a mode.
 
   \sa inputMethodHint() InputMethodHint
 */
 void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode )
 {
         createInputMethodDict();
         if ( mode == Normal ) {
                 inputMethodDict->remove
                 ( w );
         }
         else {
                 inputMethodDict->insert( w, ( void* ) mode );
         }
 }
 
 class HackDialog : public QDialog
 {
 public:
         void acceptIt()
         {
                 accept();
         }
         void rejectIt()
         {
                 reject();
         }
 };
 
 
 void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key )
 {
         // specialised actions for certain widgets. May want to
         // add more stuff here.
         if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" )
                 && activePopupWidget() ->parentWidget()
                 && activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) )
                 key = Qt::Key_Return;
 
         if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) )
                 key = Qt::Key_Return;
 
 #ifdef QWS
 
         ke->simpleData.keycode = key;
 #endif
 }
 
 class HackWidget : public QWidget
 {
 public:
         bool needsOk()
         {
                 return ( getWState() & WState_Reserved1 );
         }
 };
 
 /*!
   \internal
 */
 
 #ifdef QWS
 bool QPEApplication::qwsEventFilter( QWSEvent * e )
 {
         if ( !d->notbusysent && e->type == QWSEvent::Focus ) {
                 if ( qApp->type() != QApplication::GuiServer ) {
                         QCopEnvelope e( "QPE/System", "notBusy(QString)" );
                         e << d->appName;
                 }
                 d->notbusysent = TRUE;
         }
         if ( type() == GuiServer ) {
                 switch ( e->type ) {
                         case QWSEvent::Mouse:
                                 if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) )
                                         emit clientMoused();
                                 break;
                         default:
                                 break;
                 }
         }
         if ( e->type == QWSEvent::Key ) {
                 QWSKeyEvent *ke = ( QWSKeyEvent * ) e;
                 if ( ke->simpleData.keycode == Qt::Key_F33 ) {
                         // Use special "OK" key to press "OK" on top level widgets
                         QWidget * active = activeWindow();
                         QWidget *popup = 0;
                         if ( active && active->isPopup() ) {
                                 popup = active;
                                 active = active->parentWidget();
                         }
                         if ( active && ( int ) active->winId() == ke->simpleData.window &&
                                 !active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) {
                                 if ( ke->simpleData.is_press ) {
                                         if ( popup )
                                                 popup->close();
                                         if ( active->inherits( "QDialog" ) ) {
                                                 HackDialog * d = ( HackDialog * ) active;
                                                 d->acceptIt();
                                                 return TRUE;
                                         }
                                         else if ( ( ( HackWidget * ) active ) ->needsOk() ) {
                                                 QSignal s;
                                                 s.connect( active, SLOT( accept() ) );
                                                 s.activate();
                                         }
                                         else {
                                                 // do the same as with the select key: Map to the default action of the widget:
                                                 mapToDefaultAction( ke, Qt::Key_Return );
                                         }
                                 }
                         }
                 }
                 else if ( ke->simpleData.keycode == Qt::Key_F30 ) {
                         // Use special "select" key to do whatever default action a widget has
                         mapToDefaultAction( ke, Qt::Key_Space );
                 }
                 else if ( ke->simpleData.keycode == Qt::Key_Escape &&
                           ke->simpleData.is_press ) {
                         // Escape key closes app if focus on toplevel
                         QWidget * active = activeWindow();
                         if ( active && active->testWFlags( WType_TopLevel ) &&
                                 ( int ) active->winId() == ke->simpleData.window &&
                                 !active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) {
                                 if ( active->inherits( "QDialog" ) ) {
                                         HackDialog * d = ( HackDialog * ) active;
                                         d->rejectIt();
                                         return TRUE;
                                 }
                                 else if ( strcmp( argv() [ 0 ], "embeddedkonsole" ) != 0 ) {
                                         active->close();
                                 }
                         }
                 }
                 else if ( ke->simpleData.keycode >= Qt::Key_F1 && ke->simpleData.keycode <= Qt::Key_F29 ) {
                         // this should be if ( ODevice::inst ( )-> buttonForKeycode ( ... ))
                         // but we cannot access libopie function within libqpe :(
 
                         QWidget * active = activeWindow ( );
                         if ( active && ((int) active-> winId ( ) == ke-> simpleData.window )) {
                                 if ( d-> kbgrabbed ) { // we grabbed the keyboard
                                         QChar ch ( ke-> simpleData.unicode );
                                         QKeyEvent qke ( ke-> simpleData. is_press ? QEvent::KeyPress : QEvent::KeyRelease, 
                                                         ke-> simpleData.keycode,
                                                         ch. latin1 ( ),
                                                         ke-> simpleData.modifiers,
                                                         QString ( ch ),
                                                         ke-> simpleData.is_auto_repeat, 1 );
 
                                         QObject *which = QWidget::keyboardGrabber ( );
                                         if ( !which )  
                                                 which = QApplication::focusWidget ( );
                                         if ( !which )  
                                                 which = QApplication::activeWindow ( );
                                         if ( !which )  
                                                 which = qApp;
                                          
                                         QApplication::sendEvent ( which, &qke );
                                 }
                                 else { // we didn't grab the keyboard, so send the event to the launcher
                                         QCopEnvelope e ( "QPE/Launcher", "deviceButton(int,int,int)" );
                                         e << int( ke-> simpleData.keycode ) << int( ke-> simpleData. is_press ) << int( ke-> simpleData.is_auto_repeat );
                                 }
                         }
                         return true;
                         }       
         }
         if ( e->type == QWSEvent::Focus ) {
                 QWSFocusEvent * fe = ( QWSFocusEvent* ) e;
                 if ( !fe->simpleData.get_focus ) {
                         QWidget * active = activeWindow();
                         while ( active && active->isPopup() ) {
                                 active->close();
                                 active = activeWindow();
                         }
                 }
                 else {
                         // make sure our modal widget is ALWAYS on top
                         QWidget *topm = activeModalWidget();
                         if ( topm ) {
                                 topm->raise();
                         }
                 }
                 if ( fe->simpleData.get_focus && inputMethodDict ) {
                         InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) );
                         if ( m == AlwaysOff )
                                 Global::hideInputMethod();
                         if ( m == AlwaysOn )
                                 Global::showInputMethod();
                 }
         }
         return QApplication::qwsEventFilter( e );
 }
 #endif
 
 /*!
   Destroys the QPEApplication.
 */
 QPEApplication::~QPEApplication()
 {
         ungrabKeyboard();
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
         // Need to delete QCopChannels early, since the display will
         // be gone by the time we get to ~QObject().
         delete sysChannel;
         delete pidChannel;
 #endif
 
         delete d;
 }
 
 /*!
   Returns <tt>$OPIEDIR/</tt>.
 */
 QString QPEApplication::qpeDir()
 {
         const char * base = getenv( "OPIEDIR" );
         if ( base )
                 return QString( base ) + "/";
 
         return QString( "../" );
 }
 
 /*!
   Returns the user's current Document directory. There is a trailing "/".
   .. well, it does now,, and there's no trailing '/'
 */
 QString QPEApplication::documentDir()
 {
         const char* base = getenv( "HOME");
         if ( base )
                 return QString( base ) + "/Documents";
 
         return QString( "../Documents" );
 }
 
 static int deforient = -1;
 
 /*!
   \internal
 */
 int QPEApplication::defaultRotation()
 {
         if ( deforient < 0 ) {
                 QString d = getenv( "QWS_DISPLAY" );
                 if ( d.contains( "Rot90" ) ) {
                         deforient = 90;
                 }
                 else if ( d.contains( "Rot180" ) ) {
                         deforient = 180;
                 }
                 else if ( d.contains( "Rot270" ) ) {
                         deforient = 270;
                 }
                 else {
                         deforient = 0;
                 }
         }
         return deforient;
 }
 
 /*!
   \internal
 */
 void QPEApplication::setDefaultRotation( int r )
 {
         if ( qApp->type() == GuiServer ) {
                 deforient = r;
                 setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 );
                 Config config("qpe");
                 config.setGroup( "Rotation" );
                 config.writeEntry( "Screen", getenv("QWS_DISPLAY") );
         }
         else {
 #ifndef QT_NO_COP
                 { QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" );
                         e << r;
                 }
 #endif
 
         }
 }
 
 
 /*!
   \internal
 */
 void QPEApplication::applyStyle()
 {
         Config config( "qpe" );
         config.setGroup( "Appearance" );
 
         // don't block ourselves ...
         Opie::force_appearance = 0;
 
         static QString appname = Opie::binaryName ( );
 
         QStringList ex = config. readListEntry ( "NoStyle", ';' );
         int nostyle = 0;
         for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) {
                 if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) {
                         nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 );
                         break;
                 }
         }
 
         // Widget style
         QString style = config.readEntry( "Style", "Light" );
 
         // don't set a custom style
         if ( nostyle & Opie::Force_Style )
                 style = "Light";
 
         internalSetStyle ( style );
 
         // Colors
         QColor bgcolor( config.readEntry( "Background", "#E5E1D5" ) );
         QColor btncolor( config.readEntry( "Button", "#D6CDBB" ) );
         QPalette pal( btncolor, bgcolor );
         QString color = config.readEntry( "Highlight", "#800000" );
         pal.setColor( QColorGroup::Highlight, QColor( color ) );
         color = config.readEntry( "HighlightedText", "#FFFFFF" );
         pal.setColor( QColorGroup::HighlightedText, QColor( color ) );
         color = config.readEntry( "Text", "#000000" );
         pal.setColor( QColorGroup::Text, QColor( color ) );
         color = config.readEntry( "ButtonText", "#000000" );
         pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) );
         color = config.readEntry( "Base", "#FFFFFF" );
         pal.setColor( QColorGroup::Base, QColor( color ) );
 
         pal.setColor( QPalette::Disabled, QColorGroup::Text,
                       pal.color( QPalette::Active, QColorGroup::Background ).dark() );
 
         setPalette( pal, TRUE );
 
         // Window Decoration
         QString dec = config.readEntry( "Decoration", "Qtopia" );
 
         // don't set a custom deco
         if ( nostyle & Opie::Force_Decoration )
                 dec = "";
 
         //qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle);
 
         if ( dec != d->decorationName ) {
                 qwsSetDecoration( new QPEDecoration( dec ) );
                 d->decorationName = dec;
         }
 
         // Font
         QString ff = config.readEntry( "FontFamily", font().family() );
         int fs = config.readNumEntry( "FontSize", font().pointSize() );
 
         // don't set a custom font
         if ( nostyle & Opie::Force_Font ) {
                 ff = "Helvetica";
                 fs = 10;
         }
 
         setFont ( QFont ( ff, fs ), true );
 
         // revert to global blocking policy ...
         Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None;
         Opie::force_appearance &= ~nostyle;
 }
 
 void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data )
 {
 #ifdef Q_WS_QWS
         QDataStream stream( data, IO_ReadOnly );
         if ( msg == "applyStyle()" ) {
                 applyStyle();
         }
         else if ( msg == "toggleApplicationMenu()" ) {
                 QWidget *active = activeWindow ( );
         
                 if ( active ) {
                                 QPEMenuToolFocusManager *man = QPEMenuToolFocusManager::manager ( );            
                         bool oldactive = man-> isActive ( );
 
                         man-> setActive( !man-> isActive() );
 
                         if ( !oldactive && !man-> isActive ( )) { // no menubar to toggle -> try O-Menu
                                 QCopEnvelope e ( "QPE/TaskBar", "toggleStartMenu()" );
                         }
                 }
         }
         else if ( msg == "setDefaultRotation(int)" ) {
                 if ( type() == GuiServer ) {
                         int r;
                         stream >> r;
                         setDefaultRotation( r );
                 }
         }
+        else if ( msg == "setCurrentRotation(int)" ) {
+                int r;
+                stream >> r;
+                setCurrentRotation( r );
+         }
         else if ( msg == "shutdown()" ) {
                 if ( type() == GuiServer )
                         shutdown();
         }
         else if ( msg == "quit()" ) {
                 if ( type() != GuiServer )
                         tryQuit();
         }
         else if ( msg == "forceQuit()" ) {
                 if ( type() != GuiServer )
                         quit();
         }
         else if ( msg == "restart()" ) {
                 if ( type() == GuiServer )
                         restart();
         }
         else if ( msg == "language(QString)" ) {
                 if ( type() == GuiServer ) {
                         QString l;
                         stream >> l;
                         QString cl = getenv( "LANG" );
                         if ( cl != l ) {
                                 if ( l.isNull() )
                                         unsetenv( "LANG" );
                                 else
                                         setenv( "LANG", l.latin1(), 1 );
                                 restart();
                         }
                 }
         }
         else if ( msg == "timeChange(QString)" ) {
                 QString t;
                 stream >> t;
                 if ( t.isNull() )
                         unsetenv( "TZ" );
                 else
                         setenv( "TZ", t.latin1(), 1 );
                 // emit the signal so everyone else knows...
                 emit timeChanged();
         }
         else if ( msg == "execute(QString)" ) {
                 if ( type() == GuiServer ) {
                         QString t;
                         stream >> t;
                         Global::execute( t );
                 }
         }
         else if ( msg == "execute(QString,QString)" ) {
                 if ( type() == GuiServer ) {
                         QString t, d;
                         stream >> t >> d;
                         Global::execute( t, d );
                 }
         }
         else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) {
                 if ( type() == GuiServer ) {
                         QDateTime when;
                         QCString channel, message;
                         int data;
                         stream >> when >> channel >> message >> data;
                         AlarmServer::addAlarm( when, channel, message, data );
                 }
         }
         else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) {
                 if ( type() == GuiServer ) {
                         QDateTime when;
                         QCString channel, message;
                         int data;
                         stream >> when >> channel >> message >> data;
                         AlarmServer::deleteAlarm( when, channel, message, data );
                 }
         }
         else if ( msg == "clockChange(bool)" ) {
                 int tmp;
                 stream >> tmp;
                 emit clockChanged( tmp );
         }
         else if ( msg == "weekChange(bool)" ) {
                 int tmp;
                 stream >> tmp;
                 emit weekChanged( tmp );
         }
         else if ( msg == "setDateFormat(DateFormat)" ) {
                 DateFormat tmp;
                 stream >> tmp;
                 emit dateFormatChanged( tmp );
         }
         else if ( msg == "setVolume(int,int)" ) {
                 int t, v;
                 stream >> t >> v;
                 setVolume( t, v );
                 emit volumeChanged( muted );
         }
         else if ( msg == "volumeChange(bool)" ) {
                 stream >> muted;
                 setVolume();
                 emit volumeChanged( muted );
         }
         else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
                 int t, v;
                 stream >> t >> v;
                 setMic( t, v );
                 emit micChanged( micMuted );
         }
         else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
                 stream >> micMuted;
                 setMic();
                 emit micChanged( micMuted );
         }
         else if ( msg == "setBass(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 int t, v;
                 stream >> t >> v;
                 setBass( t, v );
         }
         else if ( msg == "bassChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 setBass();
         }
             else if ( msg == "setTreble(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 int t, v;
                 stream >> t >> v;
                 setTreble( t, v );
         }
         else if ( msg == "trebleChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
                 setTreble();
         }
 
 
 
 #endif
 }
 
 /*!
   \internal
 */
 bool QPEApplication::raiseAppropriateWindow()
 {
         bool r = FALSE;
         // ########## raise()ing main window should raise and set active
         // ########## it and then all childen. This belongs in Qt/Embedded
         QWidget *top = d->qpe_main_widget;
         if ( !top )
                 top = mainWidget();
         if ( top && d->keep_running ) {
                 if ( top->isVisible() )
                         r = TRUE;
                 else if (d->preloaded) {
                         // We are preloaded and not visible.. pretend we just started..
                         QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
                         e << d->appName;
                 }
 
                 d->show_mx(top, d->nomaximize);
                 top->raise();
                 top->setActiveWindow();
         }
         QWidget *topm = activeModalWidget();
         if ( topm && topm != top ) {
                 topm->show();
                 topm->raise();
                 topm->setActiveWindow();
                 // If we haven't already handled the fastAppShowing message
                 if (!top && d->preloaded) {
                         QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
                         e << d->appName;
                 }
                 r = FALSE;
         }
         return r;
 }
 
 void QPEApplication::pidMessage( const QCString& msg, const QByteArray& data)
 {
 #ifdef Q_WS_QWS
 
         if ( msg == "quit()" ) {
                 tryQuit();
         }
         else if ( msg == "quitIfInvisible()" ) {
                 if ( d->qpe_main_widget && !d->qpe_main_widget->isVisible() )
                         quit();
         }
         else if ( msg == "close()" ) {
                 hideOrQuit();
         }
         else if ( msg == "disablePreload()" ) {
                 d->preloaded = FALSE;
                 d->keep_running = TRUE;
                 /* so that quit will quit */
         }
         else if ( msg == "enablePreload()" ) {
                 if (d->qpe_main_widget)
                         d->preloaded = TRUE;
                 d->keep_running = TRUE;
                 /* so next quit won't quit */
         }
         else if ( msg == "raise()" ) {
                 d->keep_running = TRUE;
                 d->notbusysent = FALSE;
                 raiseAppropriateWindow();
                 // Tell the system we're still chugging along...
                 QCopEnvelope e("QPE/System", "appRaised(QString)");
                 e << d->appName;
         }
         else if ( msg == "flush()" ) {
                 emit flush();
                 // we need to tell the desktop
                 QCopEnvelope e( "QPE/Desktop", "flushDone(QString)" );
                 e << d->appName;
         }
         else if ( msg == "reload()" ) {
                 emit reload();
         }
         else if ( msg == "setDocument(QString)" ) {
                 d->keep_running = TRUE;
                 QDataStream stream( data, IO_ReadOnly );
                 QString doc;
                 stream >> doc;
                 QWidget *mw = mainWidget();
                 if ( !mw )
                         mw = d->qpe_main_widget;
                 if ( mw )
                         Global::setDocument( mw, doc );
         }
         else if ( msg == "nextView()" ) {
                 qDebug("got nextView()");
                 /*
                   if ( raiseAppropriateWindow() )
                 */
                 emit appMessage( msg, data);
         }
         else {
                 emit appMessage( msg, data);
         }
 
 #endif
 }
 
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
 
   \sa showMainDocumentWidget()
 */
 void QPEApplication::showMainWidget( QWidget* mw, bool nomaximize )
 {
         d->show(mw, nomaximize );
 }
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
 
   This calls designates the application as
   a \link docwidget.html document-oriented\endlink application.
 
   The \a mw widget \e must have this slot: setDocument(const QString&).
 
   \sa showMainWidget()
 */
 void QPEApplication::showMainDocumentWidget( QWidget* mw, bool nomaximize )
 {
         if ( mw && argc() == 2 )
                 Global::setDocument( mw, QString::fromUtf8(argv()[1]) );
 
         d->show(mw, nomaximize );
 }
 
 
 /*!
   If an application is started via a \link qcop.html QCop\endlink
   message, the application will process the \link qcop.html
   QCop\endlink message and then quit. If the application calls this
   function while processing a \link qcop.html QCop\endlink message,
   after processing its outstanding \link qcop.html QCop\endlink
   messages the application will start 'properly' and show itself.
 
   \sa keepRunning()
 */
 void QPEApplication::setKeepRunning()
 {
         if ( qApp && qApp->inherits( "QPEApplication" ) ) {
                 QPEApplication * qpeApp = ( QPEApplication* ) qApp;
                 qpeApp->d->keep_running = TRUE;
         }
 }
 
 /*!
   Returns TRUE if the application will quit after processing the
   current list of qcop messages; otherwise returns FALSE.
 
   \sa setKeepRunning()
 */
 bool QPEApplication::keepRunning() const
 {
         return d->keep_running;
 }
 
 /*!
   \internal
 */
 void QPEApplication::internalSetStyle( const QString &style )
 {
 #if QT_VERSION >= 300
         if ( style == "QPE" ) {
                 setStyle( new QPEStyle );
         }
         else {
                 QStyle *s = QStyleFactory::create( style );
                 if ( s )
                         setStyle( s );
         }
 #else
         if ( style == "Windows" ) {
                 setStyle( new QWindowsStyle );
         }
         else if ( style == "QPE" ) {
                 setStyle( new QPEStyle );
         }
         else if ( style == "Light" ) {
                 setStyle( new LightStyle );
         }
 #ifndef QT_NO_STYLE_PLATINUM
         else if ( style == "Platinum" ) {
                 setStyle( new QPlatinumStyle );
         }
 #endif
 #ifndef QT_NO_STYLE_MOTIF
         else if ( style == "Motif" ) {
                 setStyle( new QMotifStyle );
         }
 #endif
 #ifndef QT_NO_STYLE_MOTIFPLUS
         else if ( style == "MotifPlus" ) {
                 setStyle( new QMotifPlusStyle );
         }
 #endif
 
         else {
                 QStyle *sty = 0;
                 QString path = QPEApplication::qpeDir ( ) + "/plugins/styles/";
 
                 if ( style. find ( ".so" ) > 0 )
                         path += style;
                 else
                         path = path + "lib" + style. lower ( ) + ".so"; // compatibility
 
                 static QLibrary *lastlib = 0;
                 static StyleInterface *lastiface = 0;
 
                 QLibrary *lib = new QLibrary ( path );
                 StyleInterface *iface = 0;
 
                 if (( lib-> queryInterface ( IID_Style, ( QUnknownInterface ** ) &iface ) == QS_OK ) && iface )
                         sty = iface-> style ( );
 
                 if ( sty ) {
                         setStyle ( sty );
 
                         if ( lastiface )
                                 lastiface-> release ( );
                         lastiface = iface;
 
                         if ( lastlib ) {
                                 lastlib-> unload ( );
                                 delete lastlib;
                         }
                         lastlib = lib;
                 }
                 else {
                         if ( iface )
                                 iface-> release ( );
                         delete lib;
 
                         setStyle ( new LightStyle ( ));
                 }
         }
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::prepareForTermination( bool willrestart )
 {
         if ( willrestart ) {
                 // Draw a big wait icon, the image can be altered in later revisions
                 //  QWidget *d = QApplication::desktop();
                 QImage img = Resource::loadImage( "launcher/new_wait" );
                 QPixmap pix;
                 pix.convertFromImage( img.smoothScale( 1 * img.width(), 1 * img.height() ) );
                 QLabel *lblWait = new QLabel( 0, "wait hack!", QWidget::WStyle_Customize |
                                               QWidget::WStyle_NoBorder | QWidget::WStyle_Tool );
                 lblWait->setPixmap( pix );
                 lblWait->setAlignment( QWidget::AlignCenter );
                 lblWait->show();
                 lblWait->showMaximized();
         }
 #ifndef SINGLE_APP
         { QCopEnvelope envelope( "QPE/System", "forceQuit()" );
         }
         processEvents(); // ensure the message goes out.
         sleep( 1 ); // You have 1 second to comply.
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::shutdown()
 {
         // Implement in server's QPEApplication subclass
 }
 
 /*!
   \internal
 */
 void QPEApplication::restart()
 {
         // Implement in server's QPEApplication subclass
 }
 
 static QPtrDict<void>* stylusDict = 0;
 static void createDict()
 {
         if ( !stylusDict )
                 stylusDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the current StylusMode for widget \a w.
 
   \sa setStylusOperation() StylusMode
 */
 QPEApplication::StylusMode QPEApplication::stylusOperation( QWidget* w )
 {
         if ( stylusDict )
                 return ( StylusMode ) ( int ) stylusDict->find( w );
         return LeftOnly;
 }
 
 /*!
     \enum QPEApplication::StylusMode
 
     \value LeftOnly the stylus only generates LeftButton
                        events (the default).
     \value RightOnHold the stylus generates RightButton events
                        if the user uses the press-and-hold gesture.
 
     \sa setStylusOperation() stylusOperation()
 */
 
 /*!
   Causes widget \a w to receive mouse events according to the stylus
   \a mode.
 
   \sa stylusOperation() StylusMode
 */
 void QPEApplication::setStylusOperation( QWidget * w, StylusMode mode )
 {
         createDict();
         if ( mode == LeftOnly ) {
                 stylusDict->remove
                 ( w );
                 w->removeEventFilter( qApp );
         }
         else {
                 stylusDict->insert( w, ( void* ) mode );
                 connect( w, SIGNAL( destroyed() ), qApp, SLOT( removeSenderFromStylusDict() ) );
                 w->installEventFilter( qApp );
         }
 }
 
 
 /*!
   \reimp
 */
 bool QPEApplication::eventFilter( QObject *o, QEvent *e )
 {
         if ( stylusDict && e->type() >= QEvent::MouseButtonPress && e->type() <= QEvent::MouseMove ) {
                 QMouseEvent * me = ( QMouseEvent* ) e;
                 StylusMode mode = (StylusMode)(int)stylusDict->find(o);
                 switch (mode) {
                         case RightOnHold:
                                 switch ( me->type() ) {
                                         case QEvent::MouseButtonPress:
                                                 if ( me->button() == LeftButton ) {
                                                         d->presstimer = startTimer(500); // #### pref.
                                                         d->presswidget = (QWidget*)o;
                                                         d->presspos = me->pos();
                                                         d->rightpressed = FALSE;
                                                 }
                                                 break;
                                         case QEvent::MouseMove:
                                                 if (d->presstimer && (me->pos() - d->presspos).manhattanLength() > 8) {
                                                         killTimer(d->presstimer);
                                                         d->presstimer = 0;
                                                 }
                                                 break;
                                         case QEvent::MouseButtonRelease:
                                                 if ( me->button() == LeftButton ) {
                                                         if ( d->presstimer ) {
                                                                 killTimer(d->presstimer);
                                                                 d->presstimer = 0;
                                                         }
                                                         if ( d->rightpressed && d->presswidget ) {
                                                                 // Right released
                                                                 postEvent( d->presswidget,
                                                                            new QMouseEvent( QEvent::MouseButtonRelease, me->pos(),
                                                                                             RightButton, LeftButton + RightButton ) );
                                                                 // Left released, off-widget
                                                                 postEvent( d->presswidget,
diff --git a/library/qpeapplication.h b/library/qpeapplication.h
index 7d956a3..7505115 100644
--- a/library/qpeapplication.h
+++ b/library/qpeapplication.h
@@ -1,159 +1,188 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 #ifndef __QPE_APPLICATION_H__
 #define __QPE_APPLICATION_H__
 
 
+#include <qglobal.h>
 #include <qapplication.h>
 #include <qdialog.h>
+#include <qwsdisplay_qws.h>
 #if defined(_WS_QWS_) && !defined(Q_WS_QWS)
 #define Q_WS_QWS
 #endif
 #include "qpedecoration_qws.h"
 #include "timestring.h"
 
 class QCopChannel;
 class QPEApplicationData;
 class QWSEvent;
 class QWSKeyEvent;
 
 
 class QPEApplication : public QApplication
 {
     Q_OBJECT
 public:
     QPEApplication( int& argc, char **argv, Type=GuiClient );
     ~QPEApplication();
 
     static QString qpeDir();
     static QString documentDir();
     void applyStyle();
     static int defaultRotation();
     static void setDefaultRotation(int r);
+    static void setCurrentRotation(int r);
     static void grabKeyboard();
     static void ungrabKeyboard();
 
     enum StylusMode {
-        LeftOnly,
-        RightOnHold
-        // RightOnHoldLeftDelayed, etc.
+        LeftOnly,
+        RightOnHold
+        // RightOnHoldLeftDelayed, etc.
     };
     static void setStylusOperation( QWidget*, StylusMode );
     static StylusMode stylusOperation( QWidget* );
 
     enum InputMethodHint {
-        Normal,
-        AlwaysOff,
-        AlwaysOn
+        Normal,
+        AlwaysOff,
+        AlwaysOn
     };
 
     enum screenSaverHint {
-        Disable = 0,
-        DisableLightOff = 1,
-        DisableSuspend = 2,
-        Enable = 100
+        Disable = 0,
+        DisableLightOff = 1,
+        DisableSuspend = 2,
+        Enable = 100
     };
 
     static void setInputMethodHint( QWidget *, InputMethodHint );
     static InputMethodHint inputMethodHint( QWidget * );
 
     void showMainWidget( QWidget*, bool nomax=FALSE );
     void showMainDocumentWidget( QWidget*, bool nomax=FALSE );
     static void showDialog( QDialog*, bool nomax=FALSE );
     static int execDialog( QDialog*, bool nomax=FALSE );
 
     static void setKeepRunning();
     bool keepRunning() const;
 
     bool keyboardGrabbed() const;
 
     int exec();
 
 signals:
     void clientMoused();
     void timeChanged();
     void clockChanged( bool pm );
     void micChanged( bool muted );
     void volumeChanged( bool muted );
     void appMessage( const QCString& msg, const QByteArray& data);
     void weekChanged( bool startOnMonday );
     void dateFormatChanged( DateFormat );
     void flush();
     void reload();
 
 private slots:
     void systemMessage( const QCString &msg, const QByteArray &data );
     void pidMessage( const QCString &msg, const QByteArray &data );
     void removeSenderFromStylusDict();
     void hideOrQuit();
 
 protected:
     bool qwsEventFilter( QWSEvent * );
     void internalSetStyle( const QString &style );
     void prepareForTermination(bool willrestart);
     virtual void restart();
     virtual void shutdown();
     bool eventFilter( QObject *, QEvent * );
     void timerEvent( QTimerEvent * );
     bool raiseAppropriateWindow();
     virtual void tryQuit();
 
-        virtual void polish ( QWidget * ); // this is actually implemented in qt_override.cpp (!)
+    virtual void polish ( QWidget * ); // this is actually implemented in qt_override.cpp (!)
 
 private:
     void mapToDefaultAction( QWSKeyEvent *ke, int defKey );
 
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
     QCopChannel *sysChannel;
     QCopChannel *pidChannel;
 #endif
     QPEApplicationData *d;
 
     bool reserved_sh;
 
 
 
 };
 
 inline void QPEApplication::showDialog( QDialog* d, bool nomax )
 {
     QSize sh = d->sizeHint();
     int w = QMAX(sh.width(),d->width());
     int h = QMAX(sh.height(),d->height());
     if ( !nomax
-        && ( w > qApp->desktop()->width()*3/4
-            || h > qApp->desktop()->height()*3/4 ) )
+            && ( w > qApp->desktop()->width()*3/4
+                 || h > qApp->desktop()->height()*3/4 ) )
     {
-        d->showMaximized();
+        d->showMaximized();
     } else {
-        d->resize(w,h);
-        d->show();
+        d->resize(w,h);
+        d->show();
     }
 }
 
 inline int QPEApplication::execDialog( QDialog* d, bool nomax )
 {
     showDialog(d,nomax);
     return d->exec();
 }
 
+enum Transformation { None, Rot90, Rot180, Rot270 }; /* from qgfxtransformed_qws.cpp */
 
-#endif
+inline void QPEApplication::setCurrentRotation( int r )
+{
+    Transformation e;
+
+    switch (r) {
+        case 0:
+            e = None;
+            break;
+        case 90:
+            e = Rot90;
+            break;
+        case 180:
+            e = Rot180;
+            break;
+        case 270:
+            e = Rot270;
+            break;
+        default:
+            return;
+    }
 
+    qDebug("calling qApp->desktop()->qwsDisplay()->setTransformation( %d )\n", e);
+    qApp->desktop()->qwsDisplay()->setTransformation( e );
+}
+
+
+#endif