summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--libopie/odevice.cpp11
1 files changed, 11 insertions, 0 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 8624016..13b4330 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1995,586 +1995,597 @@ void SIMpad::init ( )
QTextStream ts ( &f );
d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
f. close ( );
} else {
f. setName ( "/etc/oz_version" );
if ( f. open ( IO_ReadOnly )) {
d-> m_systemstr = "OpenEmbedded/SIMpad";
d-> m_system = System_OpenZaurus;
QTextStream ts ( &f );
ts.setDevice ( &f );
d-> m_sysverstr = ts. readLine ( );
f. close ( );
}
}
m_leds [0] = m_leds [1] = Led_Off;
m_power_timer = 0;
}
void SIMpad::initButtons ( )
{
if ( d-> m_buttons )
return;
if ( isQWS( ) )
QWSServer::setKeyboardFilter ( this );
d-> m_buttons = new QValueList <ODeviceButton>;
for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
s_button *sb = simpad_buttons + i;
ODeviceButton b;
if (( sb-> model & d-> m_model ) == d-> m_model ) {
b. setKeycode ( sb-> code );
b. setUserText ( QObject::tr ( "Button", sb-> utext ));
b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
d-> m_buttons-> append ( b );
}
}
reloadButtonMapping ( );
QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
}
// SIMpad boardcontrol register CS3
#define SIMPAD_BOARDCONTROL "/proc/cs3"
#define SIMPAD_VCC_5V_EN 0x0001 // For 5V PCMCIA
#define SIMPAD_VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA
#define SIMPAD_EN1 0x0004 // This is only for EPROM's
#define SIMPAD_EN0 0x0008 // Both should be enable for 3.3V or 5V
#define SIMPAD_DISPLAY_ON 0x0010
#define SIMPAD_PCMCIA_BUFF_DIS 0x0020
#define SIMPAD_MQ_RESET 0x0040
#define SIMPAD_PCMCIA_RESET 0x0080
#define SIMPAD_DECT_POWER_ON 0x0100
#define SIMPAD_IRDA_SD 0x0200 // Shutdown for powersave
#define SIMPAD_RS232_ON 0x0400
#define SIMPAD_SD_MEDIAQ 0x0800 // Shutdown for powersave
#define SIMPAD_LED2_ON 0x1000
#define SIMPAD_IRDA_MODE 0x2000 // Fast/Slow IrDA mode
#define SIMPAD_ENABLE_5V 0x4000 // Enable 5V circuit
#define SIMPAD_RESET_SIMCARD 0x8000
//SIMpad touchscreen backlight strength control
#define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
#define SIMPAD_BACKLIGHT_MASK 0x00a10044
QValueList <OLed> SIMpad::ledList ( ) const
{
QValueList <OLed> vl;
vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
//vl << Led_Mail; //TODO find out if LED1 is accessible anyway
return vl;
}
QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
{
QValueList <OLedState> vl;
if ( l == Led_Power ) //FIXME which LED is LED2 ? The green one or the amber one?
vl << Led_Off << Led_On;
//else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
//vl << Led_Off;
return vl;
}
OLedState SIMpad::ledState ( OLed l ) const
{
switch ( l ) {
case Led_Power:
return m_leds [0];
//case Led_Mail:
// return m_leds [1];
default:
return Led_Off;
}
}
bool SIMpad::setLedState ( OLed l, OLedState st )
{
static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
if ( l == Led_Power ) {
if ( fd >= 0 ) {
LED_IN leds;
::memset ( &leds, 0, sizeof( leds ));
leds. TotalTime = 0;
leds. OnTime = 0;
leds. OffTime = 1;
leds. OffOnBlink = 2;
switch ( st ) {
case Led_Off : leds. OffOnBlink = 0; break;
case Led_On : leds. OffOnBlink = 1; break;
case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
case Led_BlinkFast: leds. OnTime = 5; leds. OffTime = 5; break;
}
{
/*TODO Implement this like that:
read from cs3
&& with SIMPAD_LED2_ON
write to cs3 */
m_leds [0] = st;
return true;
}
}
}
return false;
}
bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
{
//TODO
return false;
}
void SIMpad::timerEvent ( QTimerEvent * )
{
killTimer ( m_power_timer );
m_power_timer = 0;
QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
}
void SIMpad::alarmSound ( )
{
#ifndef QT_NO_SOUND
static Sound snd ( "alarm" );
int fd;
int vol;
bool vol_reset = false;
if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
Config cfg ( "qpe" );
cfg. setGroup ( "Volume" );
int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
if ( volalarm < 0 )
volalarm = 0;
else if ( volalarm > 100 )
volalarm = 100;
volalarm |= ( volalarm << 8 );
if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
vol_reset = true;
}
}
snd. play ( );
while ( !snd. isFinished ( ))
qApp-> processEvents ( );
if ( fd >= 0 ) {
if ( vol_reset )
::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
::close ( fd );
}
#endif
}
bool SIMpad::suspend ( ) // Must override because SIMpad does NOT have apm
{
qDebug( "ODevice for SIMpad: suspend()" );
if ( !isQWS( ) ) // only qwsserver is allowed to suspend
return false;
bool res = false;
struct timeval tvs, tvn;
::gettimeofday ( &tvs, 0 );
::sync ( ); // flush fs caches
res = ( ::system ( "cat /dev/fb/0 >/tmp/.buffer; echo > /proc/sys/pm/suspend; cat /tmp/.buffer >/dev/fb/0" ) == 0 ); //TODO make better :)
return res;
}
bool SIMpad::setSoftSuspend ( bool soft )
{
qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
return false;
}
bool SIMpad::setDisplayStatus ( bool on )
{
qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
bool res = false;
int fd;
QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
res = ( ::system( (const char*) cmdline ) == 0 );
return res;
}
bool SIMpad::setDisplayBrightness ( int bright )
{
qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
bool res = false;
int fd;
if ( bright > 255 )
bright = 255;
if ( bright < 1 )
bright = 0;
if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
int value = 255 - bright;
const int mask = SIMPAD_BACKLIGHT_MASK;
value = value << 8;
value += mask;
char writeCommand[100];
const int count = sprintf( writeCommand, "0x%x\n", value );
res = ( ::write ( fd, writeCommand, count ) != -1 );
::close ( fd );
}
return res;
}
int SIMpad::displayBrightnessResolution ( ) const
{
return 255; // All SIMpad models share the same display
}
/**************************************************
*
* Ramses
*
**************************************************/
void Ramses::init()
{
d->m_vendorstr = "M und N";
d->m_vendor = Vendor_MundN;
QFile f("/proc/sys/board/ramses");
d->m_modelstr = "Ramses";
d->m_model = Model_Ramses_MNCI;
d->m_rotation = Rot0;
d->m_holdtime = 1000;
f.setName("/etc/oz_version");
if (f.open(IO_ReadOnly)) {
d->m_systemstr = "OpenEmbedded/Ramses";
d->m_system = System_OpenZaurus;
QTextStream ts(&f);
ts.setDevice(&f);
d->m_sysverstr = ts.readLine();
f.close();
}
m_power_timer = 0;
#ifdef QT_QWS_ALLOW_OVERCLOCK
#warning *** Overclocking enabled - this may fry your hardware - you have been warned ***
#define OC(x...) x
#else
#define OC(x...)
#endif
// This table is true for a Intel XScale PXA 255
d->m_cpu_frequencies->append("99000"); // mem= 99, run= 99, turbo= 99, PXbus= 50
OC( d->m_cpu_frequencies->append("118000"); ) // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem
d->m_cpu_frequencies->append("199100"); // mem= 99, run=199, turbo=199, PXbus= 99
OC( d->m_cpu_frequencies->append("236000"); ) // mem=118, run=236, turbo=236, PXbus=118 OC'd mem
d->m_cpu_frequencies->append("298600"); // mem= 99, run=199, turbo=298, PXbus= 99
OC( d->m_cpu_frequencies->append("354000"); ) // mem=118, run=236, turbo=354, PXbus=118 OC'd mem
d->m_cpu_frequencies->append("398099"); // mem= 99, run=199, turbo=398, PXbus= 99
d->m_cpu_frequencies->append("398100"); // mem= 99, run=398, turbo=398, PXbus=196
OC( d->m_cpu_frequencies->append("471000"); ) // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus
}
bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat)
{
Q_UNUSED( keycode );
Q_UNUSED( modifiers );
Q_UNUSED( isPress );
Q_UNUSED( autoRepeat );
return false;
}
void Ramses::timerEvent(QTimerEvent *)
{
killTimer(m_power_timer);
m_power_timer = 0;
QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false);
QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false);
}
bool Ramses::setSoftSuspend(bool soft)
{
qDebug("Ramses::setSoftSuspend(%d)", soft);
#if 0
bool res = false;
int fd;
if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) ||
((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) {
int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources
if (sources >= 0) {
if (soft)
sources &= ~APM_EVT_POWER_BUTTON;
else
sources |= APM_EVT_POWER_BUTTON;
if (::ioctl(fd, APM_IOCSEVTSRC, sources) >= 0) // set new event sources
res = true;
else
perror("APM_IOCGEVTSRC");
}
else
perror("APM_IOCGEVTSRC");
::close(fd);
}
else
perror("/dev/apm_bios or /dev/misc/apm_bios");
return res;
#else
return true;
#endif
}
bool Ramses::suspend ( )
{
qDebug("Ramses::suspend");
return false;
}
/**
* This sets the display on or off
*/
bool Ramses::setDisplayStatus(bool on)
{
qDebug("Ramses::setDisplayStatus(%d)", on);
#if 0
bool res = false;
int fd;
if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) {
res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0);
::close(fd);
}
return res;
#else
return true;
#endif
}
/*
* We get something between 0..255 into us
*/
bool Ramses::setDisplayBrightness(int bright)
{
qDebug("Ramses::setDisplayBrightness(%d)", bright);
bool res = false;
int fd;
// pwm1 brighness: 20 steps 500..0 (dunkel->hell)
if (bright > 255 )
bright = 255;
if (bright < 0)
bright = 0;
// Turn backlight completely off
if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) {
char writeCommand[10];
const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0);
res = (::write(fd, writeCommand, count) != -1);
::close(fd);
}
// scale backlight brightness to hardware
bright = 500-(bright * 500 / 255);
if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) {
qDebug(" %d -> pwm1", bright);
char writeCommand[100];
const int count = sprintf(writeCommand, "%d\n", bright);
res = (::write(fd, writeCommand, count) != -1);
::close(fd);
}
return res;
}
int Ramses::displayBrightnessResolution() const
{
return 32;
}
bool Ramses::setDisplayContrast(int contr)
{
qDebug("Ramses::setDisplayContrast(%d)", contr);
bool res = false;
int fd;
// pwm0 contrast: 20 steps 79..90 (dunkel->hell)
if (contr > 255 )
contr = 255;
if (contr < 0)
contr = 0;
contr = 90 - (contr * 20 / 255);
if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) {
qDebug(" %d -> pwm0", contr);
char writeCommand[100];
const int count = sprintf(writeCommand, "%d\n", contr);
res = (::write(fd, writeCommand, count) != -1);
res = true;
::close(fd);
}
return res;
}
int Ramses::displayContrastResolution() const
{
return 20;
}
/**************************************************
* *
* Jornada *
* *
**************************************************/
bool Jornada::isJornada ( )
{
QFile f( "/proc/cpuinfo" );
if ( f. open ( IO_ReadOnly ) ) {
QTextStream ts ( &f );
QString line;
while( line = ts. readLine ( ) ) {
if ( line. left ( 8 ) == "Hardware" ) {
int loc = line. find ( ":" );
if ( loc != -1 ) {
QString model =
line. mid ( loc + 2 ). simplifyWhiteSpace( );
return ( model == "HP Jornada 56x" );
}
}
}
}
return false;
}
void Jornada::init ( )
{
d-> m_vendorstr = "HP";
d-> m_vendor = Vendor_HP;
d-> m_modelstr = "Jornada 56x";
d-> m_model = Model_Jornada_56x;
d-> m_systemstr = "Familiar";
d-> m_system = System_Familiar;
d-> m_rotation = Rot0;
+
+ QFile f ( "/etc/familiar-version" );
+ f. setName ( "/etc/familiar-version" );
+ if ( f. open ( IO_ReadOnly )) {
+
+ QTextStream ts ( &f );
+ d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
+
+ f. close ( );
}
+}
+
void Jornada::initButtons ( )
{
if ( d-> m_buttons )
return;
// Simulation uses iPAQ 3660 device buttons
qDebug ( "init Buttons" );
d-> m_buttons = new QValueList <ODeviceButton>;
for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
i_button *ib = ipaq_buttons + i;
ODeviceButton b;
if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {
b. setKeycode ( ib-> code );
b. setUserText ( QObject::tr ( "Button", ib-> utext ));
b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
d-> m_buttons-> append ( b );
}
}
reloadButtonMapping ( );
QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
}
int Jornada::displayBrightnessResolution ( ) const
{
}
bool Jornada::setDisplayBrightness ( int bright )
{
bool res = false;
int fd;
if ( bright > 255 )
bright = 255;
if ( bright < 0 )
bright = 0;
if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
FLITE_IN bl;
bl. mode = 1;
bl. pwr = bright ? 1 : 0;
bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
::close ( fd );
}
return res;
}
bool Jornada::setSoftSuspend ( bool soft )
{
bool res = false;
int fd;
if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
res = true;
else
::perror ( "write to /proc/sys/ts/suspend_button_mode" );
::close ( fd );
}
else
::perror ( "/proc/sys/ts/suspend_button_mode" );
return res;
}