-rw-r--r-- | noncore/apps/opie-console/filetransfer.cpp | 4 | ||||
-rw-r--r-- | noncore/apps/opie-console/mainwindow.cpp | 2 | ||||
-rw-r--r-- | noncore/apps/opie-console/transferdialog.cpp | 99 | ||||
-rw-r--r-- | noncore/apps/opie-console/transferdialog.h | 14 |
4 files changed, 79 insertions, 40 deletions
diff --git a/noncore/apps/opie-console/filetransfer.cpp b/noncore/apps/opie-console/filetransfer.cpp index 8e86ebb..14787f6 100644 --- a/noncore/apps/opie-console/filetransfer.cpp +++ b/noncore/apps/opie-console/filetransfer.cpp @@ -1,81 +1,81 @@ #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <fcntl.h> #include <unistd.h> #include <qcstring.h> #include <qsocketnotifier.h> #include <opie/oprocess.h> #include "procctl.h" #include "filetransfer.h" FileTransfer::FileTransfer( Type t, IOLayer* lay ) - : FileTransferLayer( lay ), m_type( t ) { + : FileTransferLayer( lay ), m_type( t ), m_pid ( 0 ) { signal(SIGPIPE, SIG_IGN ); m_not = 0l; m_proc = 0l; } FileTransfer::~FileTransfer() { } /** * now we will send the file. * * we request an fd. The IOLayer should be closed * then we will setup a pipe for progress communication * then we will dup2 the m_fd in the forked process * to do direct IO from and to the fd */ void FileTransfer::sendFile( const QString& file ) { m_prog =-1; m_fd = layer()->rawIO(); // // m_fd = ::open("/dev/ttyS0", O_RDWR); m_file = file; if ( pipe( m_comm ) < 0 ) m_comm[0] = m_comm[1] = 0; if ( pipe( m_info ) < 0 ) m_info[0] = m_info[1] = 0; m_pid = fork(); switch( m_pid ) { case -1: emit error( StartError, tr("Was not able to fork") ); break; case 0:{ setupChild(); qWarning("output:"+file ); /* exec */ char* verbose = "-vv"; char* binray = "-b"; char* typus; switch(m_type ) { case SZ: typus = ""; break; case SX: typus = "-X"; break; case SY: typus = "--ymodem"; break; } /* we should never return from here */ execlp("sz", "sz", verbose, binray, file.latin1(), typus, NULL ); /* communication for error!*/ char resultByte =1; if (m_info[1] ) write(m_info[1], &resultByte, 1 ); _exit( -1 ); break; @@ -174,80 +174,80 @@ void FileTransfer::slotRead() { QStringList lis = QStringList::split(' ', str ); /* * Transfer finished.. either complete or incomplete */ if ( lis[0].simplifyWhiteSpace() == "Transfer" ) { qWarning("sent!!!!"); emit sent(); return; } /* * do progress reading */ slotProgress( lis ); } /* * find the progress */ void FileTransfer::slotProgress( const QStringList& list ) { if ( m_type != SZ ) return; bool complete = true; int min, sec; int bps; unsigned long sent, total; min = sec = bps = -1; sent = total = 0; // Data looks like this // 0 1 2 3 4 5 // Bytes Sent 65536/11534336 BPS:7784 ETA 24:33 QStringList progi = QStringList::split('/', list[2].simplifyWhiteSpace() ); sent = progi[0].toULong(&complete ); if (!complete ) return; total = progi[1].toULong(&complete ); if (!complete || total == 0) { return; } qWarning("%s, %d, %d", progi.join("/").latin1(), sent, total ); double pro = (double)sent/total; int prog = pro * 100; // speed progi = QStringList::split(':', list[3].simplifyWhiteSpace() ); bps = progi[1].toInt(); // time progi = QStringList::split(':', list[5].simplifyWhiteSpace() ); min = progi[0].toInt(); sec = progi[1].toInt(); if ( prog > m_prog ) { m_prog = prog; emit progress(m_file, m_prog, bps, -1, min , sec ); } } void FileTransfer::cancel() { - ::kill(m_pid,9 ); + if(m_pid > 0) ::kill(m_pid,9 ); delete m_not; } void FileTransfer::slotExec() { qWarning("exited!"); char buf[2]; ::read(m_term[0], buf, 1 ); delete m_proc; delete m_not; m_proc = m_not = 0l; close( m_term[0] ); close( m_term[1] ); close( m_comm[0] ); close( m_comm[1] ); emit sent(); } diff --git a/noncore/apps/opie-console/mainwindow.cpp b/noncore/apps/opie-console/mainwindow.cpp index 3af0cba..8f5d56b 100644 --- a/noncore/apps/opie-console/mainwindow.cpp +++ b/noncore/apps/opie-console/mainwindow.cpp @@ -200,76 +200,76 @@ void MainWindow::slotDisconnect() { } void MainWindow::slotTerminate() { if ( currentSession() ) currentSession()->layer()->close(); slotClose(); /* FIXME move to the next session */ } void MainWindow::slotConfigure() { qWarning("configure"); ConfigDialog conf( manager()->all(), factory() ); conf.showMaximized(); int ret = conf.exec(); if ( QDialog::Accepted == ret ) { qWarning("conf %d", conf.list().count() ); manager()->setProfiles( conf.list() ); populateProfiles(); } } /* * we will remove * this window from the tabwidget * remove it from the list * delete it * and set the currentSession() */ void MainWindow::slotClose() { qWarning("close"); if (!currentSession() ) return; tabWidget()->remove( currentSession() ); /*it's autodelete */ m_sessions.remove( m_curSession ); m_curSession = m_sessions.first(); tabWidget()->setCurrent( m_curSession ); } /* * We will get the name * Then the profile * and then we will make a profile */ void MainWindow::slotProfile( int id) { Profile prof = manager()->profile( m_sessionsPop->text( id) ); create( prof ); } void MainWindow::create( const Profile& prof ) { Session *ses = manager()->fromProfile( prof, tabWidget() ); m_sessions.append( ses ); tabWidget()->add( ses ); m_curSession = ses; } void MainWindow::slotTransfer() { if ( currentSession() ) { TransferDialog dlg(this); - dlg.showMaximized(); + //dlg.showMaximized(); dlg.exec(); } } void MainWindow::slotOpenKeb(bool state) { if (state) m_keyBar->show(); else m_keyBar->hide(); } diff --git a/noncore/apps/opie-console/transferdialog.cpp b/noncore/apps/opie-console/transferdialog.cpp index ba06199..d3b9c0a 100644 --- a/noncore/apps/opie-console/transferdialog.cpp +++ b/noncore/apps/opie-console/transferdialog.cpp @@ -1,187 +1,218 @@ #include <qlayout.h> #include <qcombobox.h> #include <qlabel.h> #include <qlineedit.h> #include <qpushbutton.h> #include <qmessagebox.h> #include <qprogressbar.h> +#include <qradiobutton.h> +#include <qbuttongroup.h> #include <opie/ofiledialog.h> #include "filetransfer.h" #include "io_serial.h" #include "metafactory.h" #include "mainwindow.h" #include "transferdialog.h" - - - - - - TransferDialog::TransferDialog(MainWindow *parent, const char *name) -: QDialog(/*parent, name*/0l, 0l, true), m_win(parent) +: QDialog(0l, 0l, true), m_win(parent) { - m_lay = 0l; - QVBoxLayout *vbox; - QHBoxLayout *hbox, *hbox2; + m_lay = 0l; + QVBoxLayout *vbox, *vbox2; + QHBoxLayout *hbox, *hbox2, *hbox3; QLabel *file, *mode, *progress, *status; - QPushButton *selector; - + QButtonGroup *group; + QRadioButton *mode_send, *mode_receive; + + group = new QButtonGroup(QObject::tr("Transfer mode"), this); + mode_send = new QRadioButton(QObject::tr("Send"), group); + mode_receive = new QRadioButton(QObject::tr("Receive"), group); + group->insert(mode_send, id_send); + group->insert(mode_receive, id_receive); + vbox2 = new QVBoxLayout(group, 2); + vbox2->addSpacing(10); + hbox3 = new QHBoxLayout(vbox2, 2); + hbox3->add(mode_send); + hbox3->add(mode_receive); + mode_send->setChecked(true); + m_transfermode = id_send; file = new QLabel(QObject::tr("Send file"), this); - mode = new QLabel(QObject::tr("Transfer mode"), this); + mode = new QLabel(QObject::tr("Transfer protocol"), this); progress = new QLabel(QObject::tr("Progress"), this); status = new QLabel(QObject::tr("Status"), this); - statusbar = new QLabel(QObject::tr("ready"), this); + statusbar = new QLabel(QObject::tr("Ready"), this); statusbar->setFrameStyle(QFrame::Panel | QFrame::Sunken); protocol = new QComboBox(this); - /* use the fscking MetaFactory - * because we invented it for that fscking reason - * I'm really getting UPSET!!!! - */ - QStringList list = m_win->factory()->fileTransferLayers(); - for (QStringList::Iterator it =list.begin(); it != list.end(); ++it ) { - protocol->insertItem( (*it) ); - } + QStringList list = m_win->factory()->fileTransferLayers(); + for (QStringList::Iterator it = list.begin(); it != list.end(); ++it) + protocol->insertItem((*it)); filename = new QLineEdit(this); progressbar = new QProgressBar(this); progressbar->setProgress(0); selector = new QPushButton("...", this); ok = new QPushButton(QObject::tr("Start transfer"), this); cancel = new QPushButton(QObject::tr("Cancel"), this); vbox = new QVBoxLayout(this, 2); + vbox->add(group); vbox->add(file); hbox = new QHBoxLayout(vbox, 0); hbox->add(filename); hbox->add(selector); vbox->add(mode); vbox->add(protocol); vbox->add(progress); vbox->add(progressbar); vbox->add(status); vbox->add(statusbar); vbox->addStretch(1); hbox2 = new QHBoxLayout(vbox, 2); hbox2->add(ok); hbox2->add(cancel); setCaption(QObject::tr("File transfer")); show(); connect(selector, SIGNAL(clicked()), SLOT(slotFilename())); connect(ok, SIGNAL(clicked()), SLOT(slotTransfer())); connect(cancel, SIGNAL(clicked()), SLOT(slotCancel())); + connect(group, SIGNAL(clicked(int)), SLOT(slotMode(int))); } TransferDialog::~TransferDialog() { } void TransferDialog::slotFilename() { QString f; f = OFileDialog::getOpenFileName(0); if(!f.isNull()) filename->setText(f); } void TransferDialog::slotTransfer() { - if(filename->text().isEmpty()) + if((m_transfermode == id_send) && (filename->text().isEmpty())) { QMessageBox::information(this, QObject::tr("Attention"), QObject::tr("No file has been specified.")); return; } ok->setEnabled(false); - statusbar->setText(QObject::tr("Sending...")); + if(m_transfermode == id_send) statusbar->setText(QObject::tr("Sending...")); + else statusbar->setText(QObject::tr("Receiving...")); - m_lay = m_win->factory()->newFileTransfer( protocol->currentText(), - m_win->currentSession()->layer() ); - m_lay->sendFile(filename->text()); + m_lay = m_win->factory()->newFileTransfer(protocol->currentText(), m_win->currentSession()->layer()); + if(m_transfermode == id_send) + { + m_lay->sendFile(filename->text()); + } + else + { + } - connect(m_lay, SIGNAL(progress(const QString&, int, int, int, int, int)), SLOT(slotProgress(const QString&, int, int, int, int, int))); + connect(m_lay, SIGNAL(progress(const QString&, int, int, int, int, int)), SLOT(slotProgress(const QString&, int, int, int, int, int))); connect(m_lay, SIGNAL(error(int, const QString&)), SLOT(slotError(int, const QString&))); connect(m_lay, SIGNAL(sent()), SLOT(slotSent())); } void TransferDialog::slotCancel() { ok->setEnabled(true); + statusbar->setText(QObject::tr("Ready")); if(m_lay) { m_lay->cancel(); - delete m_lay; + delete m_lay; m_lay = 0l; QMessageBox::information(this, QObject::tr("Cancelled"), QObject::tr("The file transfer has been cancelled.")); } else { close(); } } void TransferDialog::slotProgress(const QString& file, int progress, int speed, int hours, int minutes, int seconds) { progressbar->setProgress(progress); } void TransferDialog::slotError(int error, const QString& message) { + statusbar->setText(QObject::tr("Ready")); + switch(error) { case FileTransferLayer::NotSupported: QMessageBox::critical(this, QObject::tr("Error"), QObject::tr("Operation not supported.")); break; case FileTransferLayer::StartError: QMessageBox::critical(this, QObject::tr("Error"), - QObject::tr("Operation not supported.")); + QObject::tr("Transfer could not be started.")); break; case FileTransferLayer::NoError: QMessageBox::critical(this, QObject::tr("Error"), - QObject::tr("Operation not supported.")); + QObject::tr("No error.")); break; case FileTransferLayer::Undefined: QMessageBox::critical(this, QObject::tr("Error"), - QObject::tr("Operation not supported.")); + QObject::tr("Undefined error occured.")); break; case FileTransferLayer::Incomplete: QMessageBox::critical(this, QObject::tr("Error"), - QObject::tr("Operation not supported.")); + QObject::tr("Incomplete transfer.")); break; case FileTransferLayer::Unknown: default: QMessageBox::critical(this, QObject::tr("Error"), - QObject::tr("Operation not supported.")); + QObject::tr("Unknown error occured.")); break; } } void TransferDialog::slotSent() { QMessageBox::information(this, QObject::tr("Sent"), QObject::tr("File has been sent.")); ok->setEnabled(true); + statusbar->setText(QObject::tr("Ready")); +} + +void TransferDialog::slotMode(int id) +{ + if(id == id_send) + { + selector->setEnabled(true); + filename->setEnabled(true); + } + else + { + selector->setEnabled(false); + filename->setEnabled(false); + } + m_transfermode = id; } diff --git a/noncore/apps/opie-console/transferdialog.h b/noncore/apps/opie-console/transferdialog.h index b0c1a76..a567161 100644 --- a/noncore/apps/opie-console/transferdialog.h +++ b/noncore/apps/opie-console/transferdialog.h @@ -1,40 +1,48 @@ #ifndef TRANSFER_DIALOG_H #define TRANSFER_DIALOG_H #include "qdialog.h" class QLineEdit; class QComboBox; class QProgressBar; class QLabel; class QPushButton; class MainWindow; class FileTransferLayer; class TransferDialog : public QDialog { Q_OBJECT public: TransferDialog(MainWindow *parent = 0l, const char *name = 0l); ~TransferDialog(); public slots: void slotFilename(); void slotTransfer(); void slotCancel(); void slotProgress(const QString&, int, int, int, int, int); void slotError(int error, const QString& message); void slotSent(); + void slotMode(int id); private: + enum Modes + { + id_send, + id_receive + }; + QLineEdit *filename; QComboBox *protocol; QProgressBar *progressbar; QLabel *statusbar; - QPushButton *ok, *cancel; - MainWindow* m_win; - FileTransferLayer* m_lay; + QPushButton *ok, *cancel, *selector; + MainWindow* m_win; + FileTransferLayer* m_lay; + int m_transfermode; }; #endif |