-rw-r--r-- | libopie/odevice.cpp | 77 |
1 files changed, 26 insertions, 51 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index 993aedf..62dc9d4 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -860,129 +860,130 @@ void ODevice::reloadButtonMapping ( ) QCString pm, hm; QByteArray pdata, hdata; if ( cfg. hasGroup ( group )) { cfg. setGroup ( group ); pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( ); pm = cfg. readEntry ( "PressedActionMessage" ). latin1 ( ); // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" )); hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( ); hm = cfg. readEntry ( "HeldActionMessage" ). latin1 ( ); // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" )); } b. setPressedAction ( OQCopMessage ( pch, pm, pdata )); b. setHeldAction ( OQCopMessage ( hch, hm, hdata )); } } void ODevice::remapPressedAction ( int button, const OQCopMessage &action ) { initButtons ( ); QString mb_chan; if ( button >= (int) d-> m_buttons-> count ( )) return; ODeviceButton &b = ( *d-> m_buttons ) [button]; b. setPressedAction ( action ); mb_chan=b. pressedAction ( ). channel ( ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan); buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( )); // buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( ))); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::remapHeldAction ( int button, const OQCopMessage &action ) { initButtons ( ); if ( button >= (int) d-> m_buttons-> count ( )) return; ODeviceButton &b = ( *d-> m_buttons ) [button]; b. setHeldAction ( action ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( )); buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( )); // buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( ))); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::virtual_hook( int id, void* data ) { - + Q_UNUSED(id); + Q_UNUSED(data); } /************************************************** * * iPAQ * **************************************************/ void iPAQ::init ( ) { d-> m_vendorstr = "HP"; d-> m_vendor = Vendor_HP; QFile f ( "/proc/hal/model" ); if ( f. open ( IO_ReadOnly )) { QTextStream ts ( &f ); d-> m_modelstr = "H" + ts. readLine ( ); if ( d-> m_modelstr == "H3100" ) d-> m_model = Model_iPAQ_H31xx; else if ( d-> m_modelstr == "H3600" ) d-> m_model = Model_iPAQ_H36xx; else if ( d-> m_modelstr == "H3700" ) d-> m_model = Model_iPAQ_H37xx; else if ( d-> m_modelstr == "H3800" ) d-> m_model = Model_iPAQ_H38xx; else if ( d-> m_modelstr == "H3900" ) d-> m_model = Model_iPAQ_H39xx; else d-> m_model = Model_Unknown; f. close ( ); } switch ( d-> m_model ) { case Model_iPAQ_H31xx: case Model_iPAQ_H38xx: d-> m_rotation = Rot90; break; case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: case Model_iPAQ_H39xx: default: d-> m_rotation = Rot270; break; } f. setName ( "/etc/familiar-version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "Familiar"; d-> m_system = System_Familiar; QTextStream ts ( &f ); d-> m_sysverstr = ts. readLine ( ). mid ( 10 ); f. close ( ); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { @@ -1912,257 +1913,231 @@ bool SIMpad::setDisplayStatus ( bool on ) if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) { res = ( ::system( (const char*) cmdline ) == 0 ); ::close ( fd ); } return res; } bool SIMpad::setDisplayBrightness ( int bright ) { qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright ); bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) { int value = 255 - bright; const int mask = SIMPAD_BACKLIGHT_MASK; value = value << 8; value += mask; char writeCommand[100]; const int count = sprintf( writeCommand, "0x%x\n", value ); res = ( ::write ( fd, writeCommand, count ) != -1 ); ::close ( fd ); } return res; } int SIMpad::displayBrightnessResolution ( ) const { switch ( model ( )) { case Model_SIMpad_CL4: case Model_SIMpad_SL4: case Model_SIMpad_SLC: case Model_SIMpad_TSinus: return 255; //TODO find out if this is save default: return 2; } } /************************************************** * * Ramses * **************************************************/ void Ramses::init() { d->m_vendorstr = "M und N"; d->m_vendor = Vendor_MundN; QFile f("/proc/sys/board/ramses"); d->m_modelstr = "Ramses"; d->m_model = Model_Ramses_MNCI; - d->m_rotation = Rot0; + d->m_rotation = Rot180; + d->m_direction = CW; d->m_holdtime = 1000; f.setName("/etc/oz_version"); if (f.open(IO_ReadOnly)) { d->m_systemstr = "OpenEmbedded/Ramses"; d->m_system = System_OpenZaurus; QTextStream ts(&f); ts.setDevice(&f); d->m_sysverstr = ts.readLine(); f.close(); } m_power_timer = 0; #ifdef QT_QWS_ALLOW_OVERCLOCK #warning *** Overclocking enabled - this may fry your hardware - you have been warned *** #define OC(x...) x #else #define OC(x...) #endif // This table is true for a Intel XScale PXA 255 d->m_cpu_frequencies->append("99000"); // mem= 99, run= 99, turbo= 99, PXbus= 50 OC( d->m_cpu_frequencies->append("118000"); ) // mem=118, run=118, turbo=118, PXbus= 59 OC'd mem d->m_cpu_frequencies->append("199100"); // mem= 99, run=199, turbo=199, PXbus= 99 OC( d->m_cpu_frequencies->append("236000"); ) // mem=118, run=236, turbo=236, PXbus=118 OC'd mem d->m_cpu_frequencies->append("298600"); // mem= 99, run=199, turbo=298, PXbus= 99 OC( d->m_cpu_frequencies->append("354000"); ) // mem=118, run=236, turbo=354, PXbus=118 OC'd mem d->m_cpu_frequencies->append("398099"); // mem= 99, run=199, turbo=398, PXbus= 99 d->m_cpu_frequencies->append("398100"); // mem= 99, run=398, turbo=398, PXbus=196 OC( d->m_cpu_frequencies->append("471000"); ) // mem=118, run=471, turbo=471, PXbus=236 OC'd mem/core/bus } bool Ramses::filter(int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat) { Q_UNUSED( keycode ); Q_UNUSED( modifiers ); Q_UNUSED( isPress ); Q_UNUSED( autoRepeat ); return false; } void Ramses::timerEvent(QTimerEvent *) { killTimer(m_power_timer); m_power_timer = 0; QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, true, false); QWSServer::sendKeyEvent(-1, HardKey_Backlight, 0, false, false); } bool Ramses::setSoftSuspend(bool soft) { - qDebug("Ramses::setSoftSuspend(%d)", soft); -#if 0 - bool res = false; - int fd; - - if (((fd = ::open("/dev/apm_bios", O_RDWR)) >= 0) || - ((fd = ::open("/dev/misc/apm_bios",O_RDWR)) >= 0)) { - - int sources = ::ioctl(fd, APM_IOCGEVTSRC, 0); // get current event sources - - if (sources >= 0) { - if (soft) - sources &= ~APM_EVT_POWER_BUTTON; - else - sources |= APM_EVT_POWER_BUTTON; - - if (::ioctl(fd, APM_IOCSEVTSRC, sources) >= 0) // set new event sources - res = true; - else - perror("APM_IOCGEVTSRC"); - } - else - perror("APM_IOCGEVTSRC"); - - ::close(fd); - } - else - perror("/dev/apm_bios or /dev/misc/apm_bios"); - - return res; -#else + Q_UNUSED(soft); return true; -#endif } bool Ramses::suspend ( ) { - qDebug("Ramses::suspend"); + //qDebug("Ramses::suspend()"); + if ( !isQWS() ) // only qwsserver is allowed to suspend return false; + + bool res = false; + int fd; + + if ((fd = ::open("/proc/sys/pm/suspend", O_WRONLY)) >= 0) { + res = ( ::write ( fd, "1", 1 ) != -1 ); + ::close(fd); + } + return res; } /** * This sets the display on or off */ bool Ramses::setDisplayStatus(bool on) { - qDebug("Ramses::setDisplayStatus(%d)", on); -#if 0 + //qDebug("Ramses::setDisplayStatus(%d)", on); bool res = false; int fd; - if ((fd = ::open ("/dev/fb/0", O_RDWR)) >= 0) { + if ((fd = ::open ("/dev/fb/1", O_RDWR)) >= 0) { res = (::ioctl(fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN) == 0); ::close(fd); } return res; -#else - return true; -#endif } /* * We get something between 0..255 into us */ bool Ramses::setDisplayBrightness(int bright) { - qDebug("Ramses::setDisplayBrightness(%d)", bright); + //qDebug("Ramses::setDisplayBrightness(%d)", bright); bool res = false; int fd; // pwm1 brighness: 20 steps 500..0 (dunkel->hell) if (bright > 255 ) bright = 255; if (bright < 0) bright = 0; // Turn backlight completely off if ((fd = ::open("/proc/sys/board/lcd_backlight", O_WRONLY)) >= 0) { char writeCommand[10]; const int count = sprintf(writeCommand, "%d\n", bright ? 1 : 0); res = (::write(fd, writeCommand, count) != -1); ::close(fd); } // scale backlight brightness to hardware - bright = 500-(bright * 500 / 255); - if ((fd = ::open("/proc/sys/board/pwm1", O_WRONLY)) >= 0) { - qDebug(" %d -> pwm1", bright); + if ((fd = ::open("/proc/sys/board/lcd_brightness", O_WRONLY)) >= 0) { + //qDebug(" %d -> pwm1", bright); char writeCommand[100]; const int count = sprintf(writeCommand, "%d\n", bright); res = (::write(fd, writeCommand, count) != -1); ::close(fd); } return res; } int Ramses::displayBrightnessResolution() const { - return 32; + return 256; } bool Ramses::setDisplayContrast(int contr) { - qDebug("Ramses::setDisplayContrast(%d)", contr); + //qDebug("Ramses::setDisplayContrast(%d)", contr); bool res = false; int fd; // pwm0 contrast: 20 steps 79..90 (dunkel->hell) if (contr > 255 ) contr = 255; if (contr < 0) contr = 0; - contr = 90 - (contr * 20 / 255); - if ((fd = ::open("/proc/sys/board/pwm0", O_WRONLY)) >= 0) { - qDebug(" %d -> pwm0", contr); + if ((fd = ::open("/proc/sys/board/lcd_contrast", O_WRONLY)) >= 0) { + //qDebug(" %d -> pwm0", contr); char writeCommand[100]; const int count = sprintf(writeCommand, "%d\n", contr); res = (::write(fd, writeCommand, count) != -1); res = true; ::close(fd); } return res; } int Ramses::displayContrastResolution() const { - return 20; + return 256; } |