-rw-r--r-- | noncore/apps/opie-console/btconfigwidget.cpp | 12 | ||||
-rw-r--r-- | noncore/apps/opie-console/emulation_handler.cpp | 4 | ||||
-rw-r--r-- | noncore/apps/opie-console/io_serial.h | 0 | ||||
-rw-r--r-- | noncore/apps/opie-console/iolayerbase.cpp | 19 | ||||
-rw-r--r-- | noncore/apps/opie-console/iolayerbase.h | 4 | ||||
-rw-r--r-- | noncore/apps/opie-console/irdaconfigwidget.cpp | 12 | ||||
-rw-r--r-- | noncore/apps/opie-console/main.cpp | 6 | ||||
-rw-r--r-- | noncore/apps/opie-console/modemconfigwidget.cpp | 12 | ||||
-rw-r--r-- | noncore/apps/opie-console/serialconfigwidget.cpp | 12 | ||||
-rw-r--r-- | noncore/apps/opie-console/terminalwidget.cpp | 68 | ||||
-rw-r--r-- | noncore/apps/opie-console/terminalwidget.h | 6 |
11 files changed, 121 insertions, 34 deletions
diff --git a/noncore/apps/opie-console/btconfigwidget.cpp b/noncore/apps/opie-console/btconfigwidget.cpp index 0ac337f..e1ff18a 100644 --- a/noncore/apps/opie-console/btconfigwidget.cpp +++ b/noncore/apps/opie-console/btconfigwidget.cpp @@ -38,153 +38,165 @@ BTConfigWidget::BTConfigWidget( const QString& name, QLabel *macLabel = new QLabel( this ); macLabel->setText( tr( "Or peer mac address" ) ); QHBox *macBox = new QHBox( this ); m_macRadio = new QRadioButton( macBox ); connect( m_macRadio, SIGNAL( toggled(bool) ), this, SLOT( slotMacRadio(bool) ) ); m_mac = new QLineEdit( macBox ); m_base = new IOLayerBase(this, "base"); m_lay->addWidget( m_device ); m_lay->addWidget( deviceBox ); m_lay->addWidget( macLabel ); m_lay->addWidget( macBox ); m_lay->addWidget( m_base ); m_deviceCmb->insertItem( "/dev/ttyU0" ); m_deviceCmb->insertItem( "/dev/ttyU1" ); } BTConfigWidget::~BTConfigWidget() { } void BTConfigWidget::load( const Profile& prof ) { int rad_flow = prof.readNumEntry("Flow"); int rad_parity = prof.readNumEntry("Parity"); int speed = prof.readNumEntry("Speed"); QString mac = prof.readEntry("Mac"); if (!mac.isEmpty() ) { m_mac->setText( mac ); } else { m_devRadio->setChecked( true ); } if (rad_flow == 1) { m_base->setFlow( IOLayerBase::Hardware ); } else if (rad_flow == 2) { m_base->setFlow( IOLayerBase::Software ); } else if (rad_flow == 0) { m_base->setFlow( IOLayerBase::None ); } if (rad_parity == 1) { m_base->setParity( IOLayerBase::Even ); } else if ( rad_parity == 2 ) { m_base->setParity( IOLayerBase::Odd ); } else { m_base->setParity( IOLayerBase::NonePar ); } switch( speed ) { case 115200: m_base->setSpeed(IOLayerBase::Baud_115200 ); break; case 57600: m_base->setSpeed( IOLayerBase::Baud_57600 ); break; case 38400: m_base->setSpeed(IOLayerBase::Baud_38400 ); break; case 19200: m_base->setSpeed( IOLayerBase::Baud_19200 ); break; + case 4800: + m_base->setSpeed( IOLayerBase::Baud_4800 ); + break; + case 2400: + m_base->setSpeed( IOLayerBase::Baud_2400 ); + break; case 9600: default: m_base->setSpeed(IOLayerBase::Baud_9600 ); break; } if ( prof.readEntry("Device").isEmpty() ) return; setCurrent( prof.readEntry("Device"), m_deviceCmb ); } /* * save speed, * flow, * parity */ void BTConfigWidget::save( Profile& prof ) { int flow, parity, speed; flow = parity = speed = 0; prof.writeEntry("Device", m_deviceCmb->currentText() ); switch( m_base->flow() ) { case IOLayerBase::None: flow = 0; break; case IOLayerBase::Software: flow = 2; break; case IOLayerBase::Hardware: flow = 1; break; } switch( m_base->parity() ) { case IOLayerBase::Odd: parity = 2; break; case IOLayerBase::Even: parity = 1; break; case IOLayerBase::NonePar: parity = 0; break; } switch( m_base->speed() ) { case IOLayerBase::Baud_115200: speed = 115200; break; case IOLayerBase::Baud_57600: speed = 57600; break; case IOLayerBase::Baud_38400: speed = 38400; break; case IOLayerBase::Baud_19200: speed = 19200; break; + case IOLayerBase::Baud_4800: + speed = 4800; + break; + case IOLayerBase::Baud_2400: + speed = 2400; + break; default: case IOLayerBase::Baud_9600: speed = 9600; break; } prof.writeEntry("Flow", flow); prof.writeEntry("Parity", parity); prof.writeEntry("Speed", speed); prof.writeEntry("Mac", m_mac->text() ); } void BTConfigWidget::slotMacRadio( bool on ) { if ( on ) { m_devRadio->setChecked( false ); m_deviceCmb->setEnabled( false ); m_mac->setEnabled( true ); } else { m_devRadio->setChecked( true ); } } void BTConfigWidget::slotDevRadio( bool on ) { if ( on ) { m_macRadio->setChecked( false ); m_deviceCmb->setEnabled( true ); m_mac->setEnabled( false ); } else { m_macRadio->setChecked( true ); } } diff --git a/noncore/apps/opie-console/emulation_handler.cpp b/noncore/apps/opie-console/emulation_handler.cpp index 89b70c6..1a0613f 100644 --- a/noncore/apps/opie-console/emulation_handler.cpp +++ b/noncore/apps/opie-console/emulation_handler.cpp @@ -1,108 +1,110 @@ #include "TEmuVt102.h" #include "profile.h" #include "emulation_handler.h" #include "script.h" /* OPIE */ #include <opie2/odebug.h> using namespace Opie::Core; EmulationHandler::EmulationHandler( const Profile& prof, QWidget* parent,const char* name ) : QObject(0, name ) { m_teWid = new TEWidget( parent, "TerminalMain"); // use setWrapAt(0) for classic behaviour (wrap at screen width, no scrollbar) // use setWrapAt(80) for normal console with scrollbar setWrap(prof.readNumEntry("Wrap", 0) ? 0 : 80); m_teWid->setMinimumSize(150, 70 ); m_script = 0; parent->resize( m_teWid->calcSize(80, 24 ) ); m_teEmu = new TEmuVt102(m_teWid ); connect(m_teEmu,SIGNAL(ImageSizeChanged(int,int) ), this, SIGNAL(changeSize(int,int) ) ); connect(m_teEmu, SIGNAL(sndBlock(const char*,int) ), this, SLOT(recvEmulation(const char*,int) ) ); m_teEmu->setConnect( true ); m_teEmu->setHistory( TRUE ); load( prof ); } TEmulation* EmulationHandler::emulation() { return m_teEmu; } EmulationHandler::~EmulationHandler() { if (isRecording()) clearScript(); delete m_teEmu; delete m_teWid; } void EmulationHandler::load( const Profile& prof) { - m_teWid->setVTFont( font( prof.readNumEntry("Font") ) ); + +// m_teWid->setVTFont( font( prof.readNumEntry("Font") ) ); + m_teWid->setVTFont( QFont( prof.readEntry("Font"), prof.readNumEntry( "FontSize" ), QFont::Normal ) ); int num = prof.readNumEntry("Color"); setColor( foreColor(num), backColor(num) ); m_teWid->setBackgroundColor(backColor(num) ); int term = prof.readNumEntry("Terminal", 0) ; switch(term) { default: case Profile::VT102: case Profile::VT100: m_teEmu->setKeytrans("vt100.keytab"); break; case Profile::Linux: m_teEmu->setKeytrans("linux.keytab"); break; case Profile::XTerm: m_teEmu->setKeytrans("default.Keytab"); break; } } void EmulationHandler::recv( const QByteArray& ar) { m_teEmu->onRcvBlock(ar.data(), ar.count() ); } void EmulationHandler::recvEmulation(const char* src, int len ) { QByteArray ar(len); memcpy(ar.data(), src, sizeof(char) * len ); if (isRecording()) m_script->append(ar); emit send(ar); } QWidget* EmulationHandler::widget() { return m_teWid; } /* * allocate a new table of colors */ void EmulationHandler::setColor( const QColor& fore, const QColor& back ) { ColorEntry table[TABLE_COLORS]; const ColorEntry *defaultCt = m_teWid->getdefaultColorTable(); for (int i = 0; i < TABLE_COLORS; i++ ) { if ( i == 0 || i == 10 ) { table[i].color = fore; }else if ( i == 1 || i == 11 ) { table[i].color = back; table[i].transparent = 0; }else { table[i].color = defaultCt[i].color; } } m_teWid->setColorTable(table ); m_teWid->update(); } QFont EmulationHandler::font( int id ) { QString name; int size = 0; switch(id ) { default: // fall through case 0: name = QString::fromLatin1("Micro"); size = 4; break; case 1: name = QString::fromLatin1("Fixed"); diff --git a/noncore/apps/opie-console/io_serial.h b/noncore/apps/opie-console/io_serial.h index 20c1ae1..f8b04e2 100644 --- a/noncore/apps/opie-console/io_serial.h +++ b/noncore/apps/opie-console/io_serial.h diff --git a/noncore/apps/opie-console/iolayerbase.cpp b/noncore/apps/opie-console/iolayerbase.cpp index b434e66..0f64d6a 100644 --- a/noncore/apps/opie-console/iolayerbase.cpp +++ b/noncore/apps/opie-console/iolayerbase.cpp @@ -1,237 +1,252 @@ #include <qlabel.h> #include <qlayout.h> #include <qcombobox.h> #include <qhbuttongroup.h> #include <qradiobutton.h> #include "iolayerbase.h" namespace { enum ParityIds { id_parity_none, id_parity_odd, id_parity_even }; enum FlowIds { id_flow_hw, id_flow_sw, id_flow_none, }; enum SpeedIds { id_baud_115200, id_baud_57600, id_baud_38400, id_baud_19200, - id_baud_9600 + id_baud_9600, + id_baud_4800, + id_baud_2400 }; enum DataIds { id_data_5, id_data_6, id_data_7, id_data_8 }; enum StopIds { id_stop_1, id_stop_1_5, id_stop_2 }; } IOLayerBase::IOLayerBase( QWidget* par, const char* name ) : QWidget( par, name ) { m_speedLabel = new QLabel(tr("Speed"), this ); m_speedBox = new QComboBox(this ); m_groupFlow = new QHButtonGroup(tr("Flow control"),this ); m_flowHw = new QRadioButton(tr("Hardware"), m_groupFlow ); m_flowSw = new QRadioButton(tr("Software"), m_groupFlow ); m_flowNone = new QRadioButton( tr("None"), m_groupFlow ); m_groupParity = new QHButtonGroup(tr("Parity"), this ); m_parityNone = new QRadioButton(tr("None"), m_groupParity ); m_parityOdd = new QRadioButton(tr("Odd"), m_groupParity ); m_parityEven = new QRadioButton(tr("Even"), m_groupParity ); m_groupData = new QHButtonGroup(tr("Data Bits"), this); m_data5 = new QRadioButton(tr("5"), m_groupData ); m_data6 = new QRadioButton(tr("6"), m_groupData ); m_data7 = new QRadioButton(tr("7"), m_groupData ); m_data8 = new QRadioButton(tr("8"), m_groupData ); m_groupStop = new QHButtonGroup(tr("Stop Bits"), this ); m_stop1 = new QRadioButton(tr("1"), m_groupStop ); m_stop15 = new QRadioButton(tr("1.5"), m_groupStop ); m_stop2 = new QRadioButton(tr("2"), m_groupStop ); m_lroot = new QVBoxLayout( this ); m_lroot->add(m_speedLabel ); m_lroot->add(m_speedBox ); m_lroot->add(m_groupFlow ); m_lroot->add(m_groupParity ); m_lroot->add( m_groupData ); m_lroot->add( m_groupStop ); m_lroot->addStretch(2); // profiles m_speedBox->insertItem(tr("115200 baud"), id_baud_115200 ); m_speedBox->insertItem(tr("57600 baud"), id_baud_57600 ); m_speedBox->insertItem(tr("38400 baud"), id_baud_38400 ); m_speedBox->insertItem(tr("19200 baud"), id_baud_19200 ); m_speedBox->insertItem(tr("9600 baud"), id_baud_9600 ); - + m_speedBox->insertItem(tr("4800 baud"), id_baud_4800 ); + m_speedBox->insertItem(tr("2400 baud"), id_baud_2400 ); }; IOLayerBase::~IOLayerBase() { } void IOLayerBase::setFlow( Flow flo ) { switch ( flo ) { case Software: m_flowSw->setChecked( true ); break; case Hardware: m_flowHw->setChecked( true ); break; case None: m_flowNone->setChecked( true ); break; } } void IOLayerBase::setParity( Parity par ) { switch( par ) { case NonePar: m_parityNone->setChecked( true ); break; case Odd: m_parityOdd->setChecked( true ); break; case Even: m_parityEven->setChecked( true ); break; } } void IOLayerBase::setSpeed( Speed sp ) { int index = -1; switch( sp ) { case Baud_115200: index = id_baud_115200; break; case Baud_57600: index = id_baud_57600; break; case Baud_38400: index = id_baud_38400; break; case Baud_19200: index = id_baud_19200; break; + case Baud_4800: + index = id_baud_4800; + break; + case Baud_2400: + index = id_baud_2400; + break; default: case Baud_9600: index = id_baud_9600; break; } m_speedBox->setCurrentItem(index ); } void IOLayerBase::setData( Data data ) { switch( data ) { case Data_Five: m_data5->setChecked( true ); break; case Data_Six: m_data6->setChecked( true ); break; case Data_Seven: m_data7->setChecked( true ); break; default: m_data8->setChecked( true ); break; } } void IOLayerBase::setStop( Stop stop ) { switch( stop ) { case Stop_Two: m_stop2->setChecked( true ); break; case Stop_OnePointFive: m_stop15->setChecked( true ); break; default: m_stop1->setChecked( true ); break; } } IOLayerBase::Flow IOLayerBase::flow()const { if (m_flowHw->isChecked() ) { return Hardware; }else if( m_flowSw->isChecked() ) { return Software; } else { return None; } } IOLayerBase::Parity IOLayerBase::parity()const { if ( m_parityOdd->isChecked() ) { return Odd; } else if ( m_parityEven->isChecked() ) { return Even; } else { return NonePar; } } IOLayerBase::Speed IOLayerBase::speed()const{ switch( m_speedBox->currentItem() ) { case id_baud_115200: return Baud_115200; break; case id_baud_57600: return Baud_57600; break; case id_baud_38400: return Baud_38400; break; case id_baud_19200: return Baud_19200; break; + case id_baud_4800: + return Baud_4800; + break; + case id_baud_2400: + return Baud_2400; + break; default: case id_baud_9600: return Baud_9600; break; } } IOLayerBase::Data IOLayerBase::data()const { if ( m_data5->isChecked() ) { return Data_Five; } else if ( m_data6->isChecked() ) { return Data_Six; } else if ( m_data7->isChecked() ) { return Data_Seven; } else { return Data_Eight; } } IOLayerBase::Stop IOLayerBase::stop()const { if ( m_stop2->isChecked() ) { return Stop_Two; } else if ( m_stop15->isChecked() ) { return Stop_OnePointFive; } else { return Stop_One; } } diff --git a/noncore/apps/opie-console/iolayerbase.h b/noncore/apps/opie-console/iolayerbase.h index e1b96df..214a35c 100644 --- a/noncore/apps/opie-console/iolayerbase.h +++ b/noncore/apps/opie-console/iolayerbase.h @@ -1,58 +1,60 @@ #ifndef OPIE_IO_LAYER_BASE_H #define OPIE_IO_LAYER_BASE_H #include <qwidget.h> class QLabel; class QComboBox; class QVBoxLayout; class QButtonGroup; class QRadioButton; class QHBoxLayout; class IOLayerBase : public QWidget { Q_OBJECT public: enum Flow { Hardware, Software, None }; enum Parity{ Odd =2 , Even =1, NonePar =0 }; enum Speed{ Baud_115200, Baud_57600, Baud_38400, Baud_19200, - Baud_9600 }; + Baud_9600, + Baud_4800, + Baud_2400 }; enum Data { Data_Five =5, Data_Six =6, Data_Seven=7, Data_Eight=8 }; enum Stop { Stop_One =1, Stop_OnePointFive=15, Stop_Two=2 }; IOLayerBase( QWidget* base, const char* name = 0l); ~IOLayerBase(); void setFlow( Flow flo ); void setParity( Parity par ); void setSpeed( Speed speed ); void setData( Data data ); void setStop( Stop stop ); Flow flow()const; Parity parity()const; Speed speed()const; Data data()const; Stop stop()const; private: QVBoxLayout* m_lroot; QLabel* m_speedLabel; QComboBox* m_speedBox; QButtonGroup* m_groupFlow, *m_groupData, *m_groupStop ; QRadioButton *m_flowHw, *m_flowSw, *m_flowNone; QButtonGroup* m_groupParity; QRadioButton *m_parityOdd, *m_parityEven, *m_parityNone; QRadioButton *m_data5, *m_data6, *m_data7, *m_data8; QRadioButton *m_stop1, *m_stop15, *m_stop2; QHBoxLayout* m_hbox; QHBoxLayout* m_hboxPar; }; #endif diff --git a/noncore/apps/opie-console/irdaconfigwidget.cpp b/noncore/apps/opie-console/irdaconfigwidget.cpp index 059530d..4ee770d 100644 --- a/noncore/apps/opie-console/irdaconfigwidget.cpp +++ b/noncore/apps/opie-console/irdaconfigwidget.cpp @@ -17,132 +17,144 @@ namespace { bo->insertItem( str ); bo->setCurrentItem( b ); } } IrdaConfigWidget::IrdaConfigWidget( const QString& name, QWidget* parent, const char* na ) : ProfileDialogConnectionWidget( name, parent, na ) { m_lay = new QVBoxLayout(this ); m_device = new QLabel(tr("Device"), this ); m_deviceCmb = new QComboBox(this ); m_deviceCmb->setEditable( TRUE ); m_base = new IOLayerBase(this, "base"); m_lay->addWidget( m_device ); m_lay->addWidget( m_deviceCmb ); m_lay->addWidget( m_base ); m_deviceCmb->insertItem( "/dev/ircomm0" ); m_deviceCmb->insertItem( "/dev/ircomm1" ); } IrdaConfigWidget::~IrdaConfigWidget() { } void IrdaConfigWidget::load( const Profile& prof ) { int rad_flow = prof.readNumEntry("Flow"); int rad_parity = prof.readNumEntry("Parity"); int speed = prof.readNumEntry("Speed"); if (rad_flow == 1) { m_base->setFlow( IOLayerBase::Hardware ); } else if (rad_flow == 2) { m_base->setFlow( IOLayerBase::Software ); } else { m_base->setFlow( IOLayerBase::None ); } if (rad_parity == 1) { m_base->setParity( IOLayerBase::Even ); } else if ( rad_parity == 2 ) { m_base->setParity( IOLayerBase::Odd ); } else { m_base->setParity( IOLayerBase::NonePar ); } switch( speed ) { case 115200: m_base->setSpeed(IOLayerBase::Baud_115200 ); break; case 57600: m_base->setSpeed( IOLayerBase::Baud_57600 ); break; case 38400: m_base->setSpeed(IOLayerBase::Baud_38400 ); break; case 19200: m_base->setSpeed( IOLayerBase::Baud_19200 ); break; + case 4800: + m_base->setSpeed( IOLayerBase::Baud_4800 ); + break; + case 2400: + m_base->setSpeed( IOLayerBase::Baud_2400 ); + break; case 9600: default: m_base->setSpeed(IOLayerBase::Baud_9600 ); break; } if ( prof.readEntry("Device").isEmpty() ) return; setCurrent( prof.readEntry("Device"), m_deviceCmb ); } /* * save speed, * flow, * parity */ void IrdaConfigWidget::save( Profile& prof ) { int flow, parity, speed; flow = parity = speed = 0; prof.writeEntry("Device", m_deviceCmb->currentText() ); switch( m_base->flow() ) { case IOLayerBase::None: flow = 0; break; case IOLayerBase::Software: flow = 2; break; case IOLayerBase::Hardware: flow = 1; break; } switch( m_base->parity() ) { case IOLayerBase::Odd: parity = 2; break; case IOLayerBase::Even: parity = 1; break; case IOLayerBase::NonePar: parity = 0; break; } switch( m_base->speed() ) { case IOLayerBase::Baud_115200: speed = 115200; break; case IOLayerBase::Baud_57600: speed = 57600; break; case IOLayerBase::Baud_38400: speed = 38400; break; case IOLayerBase::Baud_19200: speed = 19200; break; + case IOLayerBase::Baud_4800: + speed = 4800; + break; + case IOLayerBase::Baud_2400: + speed = 2400; + break; default: case IOLayerBase::Baud_9600: speed = 9600; break; } prof.writeEntry("Flow", flow); prof.writeEntry("Parity", parity); prof.writeEntry("Speed", speed); } diff --git a/noncore/apps/opie-console/main.cpp b/noncore/apps/opie-console/main.cpp index 1bd4338..f61f44e 100644 --- a/noncore/apps/opie-console/main.cpp +++ b/noncore/apps/opie-console/main.cpp @@ -1,110 +1,110 @@ #include <sys/types.h> #include <stdio.h> #include <stdlib.h> #include <signal.h> - +#include <qfile.h> #include <qpe/qpeapplication.h> #include "mainwindow.h" -//#define FSCKED_DISTRIBUTION 1 +#define FSCKED_DISTRIBUTION 1 #ifdef FSCKED_DISTRIBUTION /* * The Zaurus rom */ class FixIt { public: FixIt(); ~FixIt(); void fixIt(); /* no real interested in implementing it */ void breakIt() { }; char* m_file; }; FixIt::FixIt() { /* the new inittab */ m_file = "#\n# /etc/inittab" "#" "" "# 0 - halt (Do NOT set initdefault to this)" "# 1 - Single user mode" "# 2 - Multiuser, without NFS (The same as 3, if you do not have networking)" "# 3 - Full multiuser mode" "# 4 - JavaVM(Intent) developer mode" "# 5 - JavaVM(Intent)" "# 6 - reboot (Do NOT set initdefault to this)" "#" "id:5:initdefault:" "" "# Specify things to do when starting" "si::sysinit:/etc/rc.d/rc.sysinit" "" "l0:0:wait:/root/etc/rc.d/rc 0" "l1:1:wait:/etc/rc.d/rc 1" "l2:2:wait:/etc/rc.d/rc 2" "l3:3:wait:/etc/rc.d/rc 3" "l4:4:wait:/etc/rc.d/rc 4" "l5:5:wait:/etc/rc.d/rc 5" "l6:6:wait:/root/etc/rc.d/rc 6" "" "# Specify things to do before rebooting" "um::ctrlaltdel:/bin/umount -a -r > /dev/null 2>&1" "sw::ctrlaltdel:/sbin/swapoff -a > /dev/null 2>&1" "" "# Specify program to run on ttyS0" "s0:24:respawn:/sbin/getty 9600 ttyS0" "#pd:5:respawn:/etc/sync/serialctl" "" "# Specify program to run on tty1" "1:2:respawn:/sbin/getty 9600 tty1" "ln:345:respawn:survive -l 6 /sbin/launch" "#qt:5:respawn:/sbin/qt" "" "# collie sp." "sy::respawn:/sbin/shsync\n"; } FixIt::~FixIt() { } /* * the retail Zaurus is broken in many ways * one is that pppd is listening on our port... * we've to stop it from that and then do kill(SIGHUP,1); */ void FixIt::fixIt() { ::rename("/etc/inittab", QPEApplication::qpeDir() + "/etc/inittab" ); QFile file( "/etc/inittab" ); if ( file.open(IO_WriteOnly | IO_Raw ) ) { file.writeBlock(m_file,strlen(m_file) ); } file.close(); ::kill( SIGHUP, 1 ); } #endif int main(int argc, char **argv) { // too bad this gives us trouble the taskbar... argv[0]="embeddedkonsole"; QPEApplication app( argc, argv ); #ifdef FSCKED_DISTRIBUTION - owarn << "fscked" << oendl; +// owarn << "fscked" << oendl; FixIt it; it.fixIt(); #endif MainWindow mw; mw.setCaption(QObject::tr("Opie Console") ); app.showMainWidget( &mw ); int ap = app.exec(); #ifdef FSCKED_DISTRIBUTION /* should add a signal handler too */ it.breakIt(); #endif return ap; } diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp index 9fdaf73..90d0b5b 100644 --- a/noncore/apps/opie-console/modemconfigwidget.cpp +++ b/noncore/apps/opie-console/modemconfigwidget.cpp @@ -49,211 +49,223 @@ ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent, connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) ); m_base = new IOLayerBase( this, "base" ); m_lay->addWidget( m_device ); m_lay->addWidget( m_deviceCmb ); m_lay->addWidget( telLabel ); m_lay->addWidget( buttonBox ); m_lay->addWidget( m_base ); m_lay->addStretch( 0 ); m_deviceCmb->insertItem( "/dev/ttyS0" ); m_deviceCmb->insertItem( "/dev/ttyS1" ); m_deviceCmb->insertItem( "/dev/ttyS2" ); atConf = new ATConfigDialog( this, "ATConfig", true ); } ModemConfigWidget::~ModemConfigWidget() { } void ModemConfigWidget::load( const Profile& prof ) { int rad_flow = prof.readNumEntry( "Flow" ); int rad_parity = prof.readNumEntry( "Parity" ); int speed = prof.readNumEntry( "Speed" ); int dbits = prof.readNumEntry("DataBits"); int sbits = prof.readNumEntry("StopBits"); QString number = prof.readEntry( "Number" ); if ( !number.isEmpty() ) { m_telNumber->setText( number ); } if ( rad_flow == 1 ) { m_base->setFlow( IOLayerBase::Hardware ); } else if (rad_flow == 2) { m_base->setFlow( IOLayerBase::Software ); } else if (rad_flow == 0) { m_base->setFlow( IOLayerBase::None ); } if ( rad_parity == 1 ) { m_base->setParity( IOLayerBase::Even ); } else if ( rad_parity == 2 ){ m_base->setParity( IOLayerBase::Odd ); } else { m_base->setParity( IOLayerBase::NonePar ); } switch( speed ) { case 115200: m_base->setSpeed( IOLayerBase::Baud_115200 ); break; case 57600: m_base->setSpeed( IOLayerBase::Baud_57600 ); break; case 38400: m_base->setSpeed( IOLayerBase::Baud_38400 ); break; case 19200: m_base->setSpeed( IOLayerBase::Baud_19200 ); break; + case 4800: + m_base->setSpeed( IOLayerBase::Baud_4800 ); + break; + case 2400: + m_base->setSpeed( IOLayerBase::Baud_2400 ); + break; case 9600: default: m_base->setSpeed( IOLayerBase::Baud_9600 ); break; } if ( dbits == 5) { m_base->setData( IOLayerBase::Data_Five ); } else if (rad_flow == 6) { m_base->setData( IOLayerBase::Data_Six ); } else if (rad_flow == 7) { m_base->setData( IOLayerBase::Data_Seven ); } else { m_base->setData( IOLayerBase::Data_Eight ); } if ( sbits == 2) { m_base->setStop( IOLayerBase::Stop_Two ); } else if ( sbits == 15 ) { m_base->setStop( IOLayerBase::Stop_OnePointFive ); } else { m_base->setStop( IOLayerBase::Stop_One ); } atConf->readConfig( prof ); if ( prof.readEntry( "Device" ).isEmpty() ) { owarn << "device empty!" << oendl; return; } setCurrent( prof.readEntry( "Device" ), m_deviceCmb ); } /* * save speed, * flow, * parity */ void ModemConfigWidget::save( Profile& prof ) { int flow, parity, speed, data, stop; flow = parity = speed = data = stop = 0; prof.writeEntry( "Device", m_deviceCmb->currentText() ); switch( m_base->flow() ) { case IOLayerBase::None: flow = 0; break; case IOLayerBase::Software: flow = 2; break; case IOLayerBase::Hardware: flow = 1; break; } switch( m_base->parity() ) { case IOLayerBase::Odd: parity = 2; break; case IOLayerBase::Even: parity = 1; break; case IOLayerBase::NonePar: parity = 0; break; } switch( m_base->speed() ) { case IOLayerBase::Baud_115200: speed = 115200; break; case IOLayerBase::Baud_57600: speed = 57600; break; case IOLayerBase::Baud_38400: speed = 38400; break; case IOLayerBase::Baud_19200: speed = 19200; break; case IOLayerBase::Baud_9600: speed = 9600; break; + case IOLayerBase::Baud_4800: + speed = 4800; + break; + case IOLayerBase::Baud_2400: + speed = 2400; + break; } switch( m_base->data() ) { case IOLayerBase::Data_Five: data = 5; break; case IOLayerBase::Data_Six: data = 6; break; case IOLayerBase::Data_Seven: data = 7; break; case IOLayerBase::Data_Eight: data = 8; break; } switch( m_base->stop() ) { case IOLayerBase::Stop_One: stop = 1; break; case IOLayerBase::Stop_OnePointFive: stop = 15; break; case IOLayerBase::Stop_Two: stop = 2; break; } prof.writeEntry( "Flow", flow ); prof.writeEntry( "Parity", parity ); prof.writeEntry( "Speed", speed ); prof.writeEntry("DataBits", data); prof.writeEntry("StopBits", stop); prof.writeEntry( "Number", m_telNumber->text() ); atConf->writeConfig(prof); } void ModemConfigWidget::slotAT() { // ATConfigDialog conf( this, "ATConfig", true ); // josef/Max I know why don't you create the stuff on the stack // but making it a TopLevel Dialog and ignoring // cancel is not fun either... // what to do? FIXME!!! -zecke if ( QPEApplication::execDialog( atConf ) != QDialog::Accepted ) { // reload old settings } } void ModemConfigWidget::slotDial() { DialDialog dial( this, "DialConfig", true ); if(!m_telNumber->text().isEmpty()) { dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ \\.\\,]"), "")); } if ( QPEApplication::execDialog( &dial ) == QDialog::Accepted ) { m_telNumber->setText( dial.number() ); } } diff --git a/noncore/apps/opie-console/serialconfigwidget.cpp b/noncore/apps/opie-console/serialconfigwidget.cpp index 3edf723..5f3547a 100644 --- a/noncore/apps/opie-console/serialconfigwidget.cpp +++ b/noncore/apps/opie-console/serialconfigwidget.cpp @@ -21,178 +21,190 @@ namespace { } SerialConfigWidget::SerialConfigWidget( const QString& name, QWidget* parent, const char* na ) : ProfileDialogConnectionWidget( name, parent, na ) { m_lay = new QVBoxLayout(this ); m_device = new QLabel(tr("Device"), this ); m_deviceCmb = new QComboBox(this ); m_deviceCmb->setEditable( TRUE ); m_base = new IOLayerBase(this, "base"); m_lay->addWidget( m_device ); m_lay->addWidget( m_deviceCmb ); m_lay->addWidget( m_base ); m_deviceCmb->insertItem( "/dev/ttyS0" ); m_deviceCmb->insertItem( "/dev/ttyS1" ); m_deviceCmb->insertItem( "/dev/ttySA0"); m_deviceCmb->insertItem( "/dev/ttySA1"); } SerialConfigWidget::~SerialConfigWidget() { } void SerialConfigWidget::load( const Profile& prof ) { int rad_flow = prof.readNumEntry("Flow"); int rad_parity = prof.readNumEntry("Parity"); int speed = prof.readNumEntry("Speed"); int dbits = prof.readNumEntry("DataBits"); int sbits = prof.readNumEntry("StopBits"); if (rad_flow == 1) { m_base->setFlow( IOLayerBase::Hardware ); } else if (rad_flow == 2) { m_base->setFlow( IOLayerBase::Software ); } else { m_base->setFlow( IOLayerBase::None ); } if (rad_parity == 1) { m_base->setParity( IOLayerBase::Even ); } else if ( rad_parity == 2 ) { m_base->setParity( IOLayerBase::Odd ); } else { m_base->setParity( IOLayerBase::NonePar ); } switch( speed ) { case 115200: m_base->setSpeed(IOLayerBase::Baud_115200 ); break; case 57600: m_base->setSpeed( IOLayerBase::Baud_57600 ); break; case 38400: m_base->setSpeed(IOLayerBase::Baud_38400 ); break; case 19200: m_base->setSpeed( IOLayerBase::Baud_19200 ); break; + case 4800: + m_base->setSpeed( IOLayerBase::Baud_4800 ); + break; + case 2400: + m_base->setSpeed( IOLayerBase::Baud_2400 ); + break; case 9600: default: m_base->setSpeed(IOLayerBase::Baud_9600 ); break; } if ( dbits == 5) { m_base->setData( IOLayerBase::Data_Five ); } else if (rad_flow == 6) { m_base->setData( IOLayerBase::Data_Six ); } else if (rad_flow == 7) { m_base->setData( IOLayerBase::Data_Seven ); } else { m_base->setData( IOLayerBase::Data_Eight ); } if ( sbits == 2) { m_base->setStop( IOLayerBase::Stop_Two ); } else if ( sbits == 15 ) { m_base->setStop( IOLayerBase::Stop_OnePointFive ); } else { m_base->setStop( IOLayerBase::Stop_One ); } if ( prof.readEntry("Device").isEmpty() ) return; setCurrent( prof.readEntry("Device"), m_deviceCmb ); } /* * save speed, * flow, * parity */ void SerialConfigWidget::save( Profile& prof ) { int flow, parity, speed, data, stop; flow = parity = speed = data = stop = 0; prof.writeEntry("Device", m_deviceCmb->currentText() ); switch( m_base->flow() ) { case IOLayerBase::None: flow = 0; break; case IOLayerBase::Software: flow = 2; break; case IOLayerBase::Hardware: flow = 1; break; } switch( m_base->parity() ) { case IOLayerBase::Odd: parity = 2; break; case IOLayerBase::Even: parity = 1; break; case IOLayerBase::NonePar: parity = 0; break; } switch( m_base->speed() ) { case IOLayerBase::Baud_115200: speed = 115200; break; case IOLayerBase::Baud_57600: speed = 57600; break; case IOLayerBase::Baud_38400: speed = 38400; break; case IOLayerBase::Baud_19200: speed = 19200; break; + case IOLayerBase::Baud_4800: + speed = 4800; + break; + case IOLayerBase::Baud_2400: + speed = 2400; + break; default: case IOLayerBase::Baud_9600: speed = 9600; break; } switch( m_base->data() ) { case IOLayerBase::Data_Five: data = 5; break; case IOLayerBase::Data_Six: data = 6; break; case IOLayerBase::Data_Seven: data = 7; break; case IOLayerBase::Data_Eight: data = 8; break; } switch( m_base->stop() ) { case IOLayerBase::Stop_One: stop = 1; break; case IOLayerBase::Stop_OnePointFive: stop = 15; break; case IOLayerBase::Stop_Two: stop = 2; break; } prof.writeEntry("Flow", flow); prof.writeEntry("Parity", parity); prof.writeEntry("Speed", speed); prof.writeEntry("DataBits", data); prof.writeEntry("StopBits", stop); } diff --git a/noncore/apps/opie-console/terminalwidget.cpp b/noncore/apps/opie-console/terminalwidget.cpp index 087476b..3e3b8a6 100644 --- a/noncore/apps/opie-console/terminalwidget.cpp +++ b/noncore/apps/opie-console/terminalwidget.cpp @@ -1,226 +1,242 @@ #include "terminalwidget.h" /* OPIE */ #include <opie2/odebug.h> + using namespace Opie::Core; /* QT */ #include <qlabel.h> #include <qcheckbox.h> #include <qcombobox.h> #include <qradiobutton.h> #include <qhgroupbox.h> #include <qhbuttongroup.h> #include <qlayout.h> +#include <qhbox.h> namespace { enum TermIds { id_term_vt100 = 0, id_term_vt102, id_term_linux, id_term_xterm }; enum ColourIds { id_term_black, id_term_white, id_term_green, id_term_orange }; enum FontIds { id_size_small, id_size_medium, id_size_large }; }; TerminalWidget::TerminalWidget( const QString& name, QWidget* parent, const char* na ) : ProfileDialogTerminalWidget( name, parent, na ) { m_terminal = new QLabel(tr("Terminal Type"), this ); m_terminalBox = new QComboBox(this); m_colorLabel = new QLabel(tr("Color scheme"), this); m_colorCmb = new QComboBox(this ); - m_groupSize = new QHButtonGroup(tr("Font size"), this ); - m_sizeSmall = new QRadioButton(tr("small"), m_groupSize ); - m_sizeMedium = new QRadioButton(tr("medium"), m_groupSize ); - m_sizeLarge = new QRadioButton(tr("large"), m_groupSize ); +// m_groupSize = new QHButtonGroup(tr("Font size"), this ); + m_groupSize = new QHBox( this ); + m_fontSelector = new Opie::Ui::OFontSelector( false, m_groupSize ); + +// m_sizeSmall = new QRadioButton(tr("small"), m_groupSize ); +// m_sizeMedium = new QRadioButton(tr("medium"), m_groupSize ); +// m_sizeLarge = new QRadioButton(tr("large"), m_groupSize ); m_groupConv = new QHGroupBox( tr("Line-break conversions"), this ); m_convInbound = new QCheckBox( tr("Inbound"), m_groupConv ); m_convOutbound = new QCheckBox( tr("Outbound"), m_groupConv ); + m_groupOptions = new QHGroupBox( tr("Options"), this ); m_optionEcho = new QCheckBox( tr("Local echo"), m_groupOptions ); m_optionWrap = new QCheckBox( tr("Line wrap"), m_groupOptions ); m_lroot = new QVBoxLayout( this ); m_typeBox = new QVBoxLayout( m_lroot ); m_colorBox = new QVBoxLayout( m_lroot ); // Layout m_typeBox->add( m_terminal ); m_typeBox->add( m_terminalBox ); m_lroot->add( m_groupSize ); m_colorBox->add( m_colorLabel ); m_colorBox->add( m_colorCmb ); m_lroot->add( m_groupConv ); m_lroot->add( m_groupOptions ); m_lroot->addStretch( 0 ); // Fill in some options owarn << "Options for terminal box" << oendl; m_terminalBox->insertItem( tr("VT 100"), 0 ); // /*, id_term_vt100*/ ); m_terminalBox->insertItem( tr("VT 102"), 1 ); // /* , id_term_vt102 */); m_terminalBox->insertItem( tr("Linux Console"), 2 ); //, id_term_linux ); m_terminalBox->insertItem( tr("X-Terminal"), 3 ); //, id_term_xterm ); //m_terminalBox->insertItem( tr("ANSI"), id_term_ansi ); m_colorCmb->insertItem( tr("black on white"), id_term_black ); m_colorCmb->insertItem( tr("white on black"), id_term_white ); m_colorCmb->insertItem( tr("green on black"), id_term_green ); m_colorCmb->insertItem( tr("orange on black"), id_term_orange ); // signals + slots /* connect(m_terminalBox, SIGNAL(activated(int) ), this, SLOT(slotTermTerm(int) ) ); connect(m_colorBox, SIGNAL(activated(int) ), tis, SLOT(slotTermColor(int) ) ); connect(m_groupSize, SIGNAL(activated(int) ), this, SLOT(slotTermFont(int) ) ); connect(m_optionEcho, SIGNAL(toggled(bool) ), this, SLOT(slotTermEcho(bool) ) ); connect(m_optionWrap, SIGNAL(toggled(bool) ), this, SLOT(slotTermWrap(bool) ) ); connect(m_convInbound, SIGNAL(toggled(bool) ), this, SLOT(slotTermInbound(bool) ) ); connect(m_convOutbound, SIGNAL(toggled(bool) ), this, SLOT(slotTermOutbound(bool) ) ); */ } TerminalWidget::~TerminalWidget() { } void TerminalWidget::load( const Profile& prof ) { int term = prof.readNumEntry("Terminal"); int color = prof.readNumEntry("Color"); - int fontsize = prof.readNumEntry("Font"); +// int fontsize = prof.readNumEntry("Font"); int opt_echo = prof.readNumEntry("Echo"); int opt_wrap = prof.readNumEntry("Wrap"); int opt_inbound = prof.readNumEntry("Inbound"); int opt_outbound = prof.readNumEntry("Outbound"); switch( term ) { case Profile::VT100: m_terminalBox->setCurrentItem(id_term_vt100 ); break; case Profile::VT102: m_terminalBox->setCurrentItem(id_term_vt102 ); break; case Profile::Linux: m_terminalBox->setCurrentItem(id_term_linux ); break; case Profile::XTerm: m_terminalBox->setCurrentItem(id_term_xterm ); break; default: m_terminalBox->setCurrentItem(id_term_vt102 ); break; }; switch( color ) { case Profile::Black: m_colorCmb->setCurrentItem(id_term_black ); break; case Profile::White: m_colorCmb->setCurrentItem(id_term_white ); break; case Profile::Green: m_colorCmb->setCurrentItem(id_term_green ); break; case Profile::Orange: m_colorCmb->setCurrentItem(id_term_orange ); break; default: break; }; - switch( fontsize ) { - case Profile::Micro: - m_sizeSmall->setChecked(true ); - break; - case Profile::Small: - m_sizeMedium->setChecked(true ); - break; - case Profile::Medium: - m_sizeLarge->setChecked( true ); - break; - default: - m_sizeMedium->setChecked(true ); - break; - }; + + m_fontSelector->setSelectedFont( prof.readEntry( "Font"), prof.readEntry( "FontStyle"), prof.readNumEntry( "FontSize" ), prof.readEntry( "FontCharset") ); + +// switch( fontsize ) { +// case Profile::Micro: +// m_sizeSmall->setChecked(true ); +// break; +// case Profile::Small: +// m_sizeMedium->setChecked(true ); +// break; +// case Profile::Medium: +// m_sizeLarge->setChecked( true ); +// break; +// default: +// m_sizeMedium->setChecked(true ); +// break; +// }; if (opt_echo) m_optionEcho->setChecked( true ); if (opt_wrap) m_optionWrap->setChecked( true ); if (opt_inbound) m_convInbound->setChecked( true ); if (opt_outbound) m_convOutbound->setChecked( true ); } void TerminalWidget::save( Profile& profile ) { switch(m_terminalBox->currentItem() ) { case id_term_vt100: profile.writeEntry("Terminal", Profile::VT100 ); break; case id_term_vt102: profile.writeEntry("Terminal", Profile::VT102 ); break; case id_term_linux: profile.writeEntry("Terminal", Profile::Linux ); break; case id_term_xterm: profile.writeEntry("Terminal", Profile::XTerm ); break; //case id_term_ansi: // profile.writeEntry("Terminal", Profile::VT102 ); // break; default: break; }; // color switch(m_colorCmb->currentItem() ) { case id_term_black: profile.writeEntry("Color", Profile::Black ); break; case id_term_white: profile.writeEntry("Color", Profile::White ); break; case id_term_green: profile.writeEntry("Color", Profile::Green ); break; case id_term_orange: profile.writeEntry("Color", Profile::Orange ); break; default: break; }; - if (m_sizeSmall->isChecked() ) { - profile.writeEntry("Font", Profile::Micro ); - }else if (m_sizeMedium->isChecked() ) { - profile.writeEntry("Font", Profile::Small ); - }else { - profile.writeEntry("Font", Profile::Medium ); - } + + profile.writeEntry( "FontSize", m_fontSelector->fontSize() ); + profile.writeEntry( "FontStyle", m_fontSelector->fontStyle() ); + profile.writeEntry( "FontCharset", m_fontSelector->fontCharSet() ); + profile.writeEntry( "Font", m_fontSelector->fontFamily() ); + + +// if (m_sizeSmall->isChecked() ) { +// profile.writeEntry("Font", Profile::Micro ); +// }else if (m_sizeMedium->isChecked() ) { +// profile.writeEntry("Font", Profile::Small ); +// }else { +// profile.writeEntry("Font", Profile::Medium ); +// } profile.writeEntry("Echo", m_optionEcho->isChecked() ); profile.writeEntry("Wrap", m_optionWrap->isChecked() ); profile.writeEntry("Inbound", m_convInbound->isChecked() ); profile.writeEntry("Outbound",m_convOutbound->isChecked() ); } diff --git a/noncore/apps/opie-console/terminalwidget.h b/noncore/apps/opie-console/terminalwidget.h index 217fea7..2bd38d6 100644 --- a/noncore/apps/opie-console/terminalwidget.h +++ b/noncore/apps/opie-console/terminalwidget.h @@ -1,48 +1,52 @@ #ifndef OPIE_TERMINAL_WIDGET_H #define OPIE_TERMINAL_WIDGET_H #include "profiledialogwidget.h" +#include <opie2/ofontselector.h> + class QComboBox; class QLabel; class QVBoxLayout; class QHBoxLayout; class QButtonGroup; class QRadioButton; class QCheckBox; class QHGroupBox; class QHBox; + class TerminalWidget : public ProfileDialogTerminalWidget { Q_OBJECT public: TerminalWidget(const QString& name, QWidget* wid, const char* na ) ; ~TerminalWidget(); void load( const Profile& ); void save( Profile& ); private: QVBoxLayout* m_lroot, *m_typeBox, *m_colorBox; QLabel* m_terminal, *m_colorLabel; QComboBox* m_terminalBox, *m_colorCmb; - QButtonGroup* m_groupSize; + QHBox* m_groupSize; QRadioButton* m_sizeSmall, *m_sizeMedium, *m_sizeLarge; QHGroupBox *m_groupConv, *m_groupOptions; QCheckBox *m_convInbound, *m_convOutbound, *m_optionEcho, *m_optionWrap; + Opie::Ui::OFontSelector *m_fontSelector; }; #endif |