| -rw-r--r-- | libopie2/opiecore/device/odevice.cpp | 13 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice.h | 1 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_ipaq.cpp | 3 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_jornada.cpp | 3 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_yopy.cpp | 4 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_zaurus.cpp | 4 |
6 files changed, 11 insertions, 17 deletions
diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp index 8b64c41..67cae1c 100644 --- a/libopie2/opiecore/device/odevice.cpp +++ b/libopie2/opiecore/device/odevice.cpp @@ -116,187 +116,187 @@ struct default_button default_buttons [] = { ODevice *ODevice::inst() { static ODevice *dev = 0; // rewrite this to only use /proc/cpuinfo or so QString cpu_info; if ( !dev ) { QFile f( PATH_PROC_CPUINFO ); if ( f.open( IO_ReadOnly ) ) { QTextStream s( &f ); while ( !s.atEnd() ) { QString line; line = s.readLine(); if ( line.startsWith( "Hardware" ) ) { qDebug( "ODevice() - found '%s'", (const char*) line ); cpu_info = line; if ( line.contains( "sharp", false ) ) dev = new Internal::Zaurus(); else if ( line.contains( "ipaq", false ) ) dev = new Internal::iPAQ(); else if ( line.contains( "simpad", false ) ) dev = new Internal::SIMpad(); else if ( line.contains( "jornada", false ) ) dev = new Internal::Jornada(); else if ( line.contains( "ramses", false ) ) dev = new Internal::Ramses(); else if ( line.contains( "Tradesquare.NL", false ) ) dev = new Internal::Beagle(); else qWarning( "ODevice() - unknown hardware - using default." ); break; } } } else { qWarning( "ODevice() - can't open '%s' - unknown hardware - using default.", PATH_PROC_CPUINFO ); } if ( !dev ) dev = new ODevice(); dev->init(cpu_info); } return dev; } ODevice::ODevice() { d = new ODeviceData; d->m_modelstr = "Unknown"; d->m_model = Model_Unknown; d->m_vendorstr = "Unknown"; d->m_vendor = Vendor_Unknown; d->m_systemstr = "Unknown"; d->m_system = System_Unknown; d->m_sysverstr = "0.0"; d->m_rotation = Rot0; d->m_direction = CW; d->m_holdtime = 1000; // 1000ms d->m_buttons = 0; d->m_cpu_frequencies = new QStrList; /* mixer */ d->m_sound = d->m_vol = d->m_mixer = -1; + + /* System QCopChannel created */ + d->m_initializedButtonQcop = false; // New distribution detection code first checks for legacy distributions, // identified by /etc/familiar-version or /etc/oz_version. // Then check for OpenEmbedded and lastly, read /etc/issue for ( unsigned int i = 0; i < sizeof distributions; ++i ) { if ( QFile::exists( distributions[i].sysvfile ) ) { d->m_systemstr = distributions[i].sysstr; d->m_system = distributions[i].system; d->m_sysverstr = "<Unknown>"; QFile f( distributions[i].sysvfile ); if ( f.open( IO_ReadOnly ) ) { QTextStream ts( &f ); d->m_sysverstr = ts.readLine().replace( QRegExp( "\\\\." ), "" ); } break; } } } void ODevice::systemMessage( const QCString &msg, const QByteArray & ) { if ( msg == "deviceButtonMappingChanged()" ) { reloadButtonMapping(); } } void ODevice::init(const QString&) { } /** * This method initialises the button mapping */ void ODevice::initButtons() { if ( d->m_buttons ) return; qDebug ( "init Buttons" ); d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( default_buttons ) / sizeof( default_button )); i++ ) { default_button *db = default_buttons + i; ODeviceButton b; b. setKeycode ( db->code ); b. setUserText ( QObject::tr ( "Button", db->utext )); b. setPixmap ( Resource::loadPixmap ( db->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( db->fpressedservice ), db->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( db->fheldservice ), db->fheldaction )); d->m_buttons->append ( b ); } reloadButtonMapping(); - - QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } ODevice::~ODevice() { // we leak m_devicebuttons and m_cpu_frequency // but it's a singleton and it is not so importantant // -zecke delete d; } bool ODevice::setSoftSuspend ( bool /*soft*/ ) { return false; } //#include <linux/apm_bios.h> #define APM_IOC_SUSPEND OD_IO( 'A', 2 ) /** * This method will try to suspend the device * It only works if the user is the QWS Server and the apm application * is installed. * It tries to suspend and then waits some time cause some distributions * do have asynchronus apm implementations. * This method will either fail and return false or it'll suspend the * device and return once the device got woken up * * @return if the device got suspended */ bool ODevice::suspend() { if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; ODevice::sendSuspendmsg(); struct timeval tvs, tvn; ::gettimeofday ( &tvs, 0 ); ::sync(); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); // This is needed because the iPAQ apm implementation is asynchronous and we // can not be sure when exactly the device is really suspended // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists. if ( res ) { do { // wait at most 1.5 sec: either suspend didn't work or the device resumed ::usleep ( 200 * 1000 ); ::gettimeofday ( &tvn, 0 ); } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 ); } return res; } //#include <linux/fb.h> better not rely on kernel headers in userspace ... #define FBIOBLANK OD_IO( 'F', 0x11 ) // 0x4611 @@ -584,128 +584,135 @@ const QStrList &ODevice::allowedCpuFrequencies() const * * @param index index into d->m_cpu_frequencies of the frequency to be set */ bool ODevice::setCurrentCpuFrequency(uint index) { if (index >= d->m_cpu_frequencies->count()) return false; char *freq = d->m_cpu_frequencies->at(index); qWarning("set freq to %s", freq); int fd; if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) { char writeCommand[50]; const int count = sprintf(writeCommand, "%s\n", freq); int res = (::write(fd, writeCommand, count) != -1); ::close(fd); return res; } return false; } /** * @return a list of hardware buttons */ const QValueList <ODeviceButton> &ODevice::buttons() { initButtons(); return *d->m_buttons; } /** * @return The amount of time that would count as a hold */ uint ODevice::buttonHoldTime() const { return d->m_holdtime; } /** * This method return a ODeviceButton for a key code * or 0 if no special hardware button is available for the device * * @return The devicebutton or 0l * @see ODeviceButton */ const ODeviceButton *ODevice::buttonForKeycode ( ushort code ) { initButtons(); for ( QValueListConstIterator<ODeviceButton> it = d->m_buttons->begin(); it != d->m_buttons->end(); ++it ) { if ( (*it). keycode() == code ) return &(*it); } return 0; } void ODevice::reloadButtonMapping() { initButtons(); + + if(!d->m_initializedButtonQcop) { + QCopChannel *chan = new QCopChannel("QPE/System", this, "ODevice button channel"); + connect(chan,SIGNAL(received(const QCString&,const QByteArray&)), + this,SLOT(systemMessage(const QCString&,const QByteArray&))); + d->m_initializedButtonQcop = true; + } Config cfg ( "ButtonSettings" ); for ( uint i = 0; i < d->m_buttons->count(); i++ ) { ODeviceButton &b = ( *d->m_buttons ) [i]; QString group = "Button" + QString::number ( i ); QCString pch, hch; QCString pm, hm; QByteArray pdata, hdata; if ( cfg. hasGroup ( group )) { cfg. setGroup ( group ); pch = cfg. readEntry ( "PressedActionChannel" ). latin1(); pm = cfg. readEntry ( "PressedActionMessage" ). latin1(); // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" )); hch = cfg. readEntry ( "HeldActionChannel" ). latin1(); hm = cfg. readEntry ( "HeldActionMessage" ). latin1(); // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" )); } b. setPressedAction ( OQCopMessage ( pch, pm, pdata )); b. setHeldAction ( OQCopMessage ( hch, hm, hdata )); } } void ODevice::remapPressedAction ( int button, const OQCopMessage &action ) { initButtons(); QString mb_chan; if ( button >= (int) d->m_buttons->count()) return; ODeviceButton &b = ( *d->m_buttons ) [button]; b. setPressedAction ( action ); mb_chan=b. pressedAction(). channel(); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan); buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction(). message()); // buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction(). data())); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::remapHeldAction ( int button, const OQCopMessage &action ) { initButtons(); if ( button >= (int) d->m_buttons->count()) return; ODeviceButton &b = ( *d->m_buttons ) [button]; b. setHeldAction ( action ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); diff --git a/libopie2/opiecore/device/odevice.h b/libopie2/opiecore/device/odevice.h index 6f0d036..21fcc3f 100644 --- a/libopie2/opiecore/device/odevice.h +++ b/libopie2/opiecore/device/odevice.h @@ -296,79 +296,80 @@ public: * */ const QValueList<ODeviceButton> &buttons(); /** * Returns the DeviceButton for the \a keyCode. If \a keyCode is not found, it * returns 0L */ const ODeviceButton *buttonForKeycode ( ushort keyCode ); /** * Reassigns the pressed action for \a button. To return to the factory * default pass an empty string as \a qcopMessage. */ void remapPressedAction ( int button, const OQCopMessage &qcopMessage ); /** * Reassigns the held action for \a button. To return to the factory * default pass an empty string as \a qcopMessage. */ void remapHeldAction ( int button, const OQCopMessage &qcopMessage ); /** * How long (in ms) you have to press a button for a "hold" action */ uint buttonHoldTime() const; signals: void buttonMappingChanged(); private slots: void systemMessage ( const QCString &, const QByteArray & ); void playingStopped(); protected: void addPreHandler(QWSServer::KeyboardFilter*aFilter); void remPreHandler(QWSServer::KeyboardFilter*aFilter); void reloadButtonMapping(); void changeMixerForAlarm( int mixer, const char* file, Sound *snd); /* ugly virtual hook */ virtual void virtual_hook( int id, void* data ); }; class ODeviceData { public: QString m_vendorstr; OVendor m_vendor; QString m_modelstr; OModel m_model; QString m_systemstr; OSystem m_system; QString m_sysverstr; Transformation m_rotation; ODirection m_direction; QValueList <ODeviceButton> *m_buttons; uint m_holdtime; QStrList *m_cpu_frequencies; + bool m_initializedButtonQcop : 1; /* values for changeMixerForAlarm */ int m_sound, m_vol, m_mixer; }; extern bool isQWS(); extern QCString makeChannel ( const char *str ); } } #endif diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp index 6193ddc..9e01a0c 100644 --- a/libopie2/opiecore/device/odevice_ipaq.cpp +++ b/libopie2/opiecore/device/odevice_ipaq.cpp @@ -128,131 +128,128 @@ void iPAQ::init(const QString& model) d->m_model = Model_iPAQ_H36xx; else if ( d->m_modelstr == "H3700" ) d->m_model = Model_iPAQ_H37xx; else if ( d->m_modelstr == "H3800" ) d->m_model = Model_iPAQ_H38xx; else if ( d->m_modelstr == "H3900" ) d->m_model = Model_iPAQ_H39xx; else if ( d->m_modelstr == "H5400" ) d->m_model = Model_iPAQ_H5xxx; else if ( d->m_modelstr == "H2200" ) d->m_model = Model_iPAQ_H22xx; else d->m_model = Model_Unknown; switch ( d->m_model ) { case Model_iPAQ_H31xx: case Model_iPAQ_H38xx: d->m_rotation = Rot90; break; case Model_iPAQ_H5xxx: case Model_iPAQ_H22xx: d->m_rotation = Rot0; break; case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: case Model_iPAQ_H39xx: default: d->m_rotation = Rot270; break; } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void iPAQ::initButtons() { if ( d->m_buttons ) return; if ( isQWS( ) ) { addPreHandler(this); } d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) { i_button *ib = ipaq_buttons + i; ODeviceButton b; if (( ib->model & d->m_model ) == d->m_model ) { b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext )); b. setPixmap ( Resource::loadPixmap ( ib->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); - - QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } QValueList <OLed> iPAQ::ledList() const { QValueList <OLed> vl; vl << Led_Power; if ( d->m_model == Model_iPAQ_H38xx ) vl << Led_BlueTooth; return vl; } QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast; else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx ) vl << Led_Off; // << Led_On << ??? return vl; } OLedState iPAQ::ledState ( OLed l ) const { switch ( l ) { case Led_Power: return m_leds [0]; case Led_BlueTooth: return m_leds [1]; default: return Led_Off; } } bool iPAQ::setLedState ( OLed l, OLedState st ) { static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK ); if ( l == Led_Power ) { if ( fd >= 0 ) { LED_IN leds; ::memset ( &leds, 0, sizeof( leds )); leds. TotalTime = 0; leds. OnTime = 0; leds. OffTime = 1; leds. OffOnBlink = 2; switch ( st ) { case Led_Off : leds. OffOnBlink = 0; break; case Led_On : leds. OffOnBlink = 1; break; case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break; case Led_BlinkFast: leds. OnTime = 5; leds. OffTime = 5; break; } if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) { m_leds [0] = st; return true; } } } return false; } diff --git a/libopie2/opiecore/device/odevice_jornada.cpp b/libopie2/opiecore/device/odevice_jornada.cpp index 2cab0c8..8141f1c 100644 --- a/libopie2/opiecore/device/odevice_jornada.cpp +++ b/libopie2/opiecore/device/odevice_jornada.cpp @@ -79,129 +79,126 @@ typedef struct { using namespace Opie::Core; using namespace Opie::Core::Internal; struct j_button jornada56x_buttons [] = { { Model_Jornada_56x, Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Calendar Button"), "devicebuttons/jornada56x_calendar", "datebook", "nextView()", "today", "raise()" }, { Model_Jornada_56x, Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Contacts Button"), "devicebuttons/jornada56x_contact", "addressbook", "raise()", "addressbook", "beamBusinessCard()" }, { Model_Jornada_56x, Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Todo Button"), "devicebuttons/jornada56x_todo", "todolist", "raise()", "todolist", "create()" }, { Model_Jornada_56x, Qt::Key_F8, QT_TRANSLATE_NOOP("Button", "Home Button"), "devicebuttons/jornada56x_home", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, { Model_Jornada_56x, Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Record Button"), "devicebuttons/jornada56x_record", "QPE/VMemo", "toggleRecord()", "sound", "raise()" }, }; void Jornada::init(const QString&) { d->m_vendorstr = "HP"; d->m_vendor = Vendor_HP; d->m_modelstr = "Jornada 56x"; d->m_model = Model_Jornada_56x; d->m_rotation = Rot0; //Distribution detecting code is now in base class } void Jornada::initButtons() { if ( d->m_buttons ) return; d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( jornada56x_buttons ) / sizeof( j_button )); i++ ) { j_button *ib = jornada56x_buttons + i; ODeviceButton b; if (( ib->model & d->m_model ) == d->m_model ) { b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext )); b. setPixmap ( Resource::loadPixmap ( ib->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); - - QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&))); } int Jornada::displayBrightnessResolution() const { return 255; } bool Jornada::setDisplayBrightness( int bright ) { bool res = false; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; QString cmdline; if ( !bright ) cmdline = QString().sprintf( "echo 4 > /sys/class/backlight/sa1100fb/power"); else cmdline = QString().sprintf( "echo 0 > /sys/class/backlight/sa1100fb/power; echo %d > /sys/class/backlight/sa1100fb/brightness", bright ); res = ( ::system( (const char*) cmdline ) == 0 ); return res; } bool Jornada::suspend( ) { qDebug("ODevice::suspend"); if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; ODevice::sendSuspendmsg(); struct timeval tvs; ::gettimeofday ( &tvs, 0 ); ::sync(); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); return res; } bool Jornada::setDisplayStatus ( bool on ) { bool res = false; QString cmdline = QString( "echo %1 > /sys/class/lcd/sa1100fb/power; echo %2 > /sys/class/backlight/sa1100fb/power").arg( on ? "0" : "4" ).arg( on ? "0" : "4" ); res = ( ::system( (const char*) cmdline ) == 0 ); return res; } diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp index a06d7ec..8f22514 100644 --- a/libopie2/opiecore/device/odevice_yopy.cpp +++ b/libopie2/opiecore/device/odevice_yopy.cpp @@ -48,110 +48,106 @@ _;:, .> :=|. This program is free software; you can #include <signal.h> #include <sys/ioctl.h> #include <sys/time.h> #include <unistd.h> #ifndef QT_NO_SOUND #include <linux/soundcard.h> #endif using namespace Opie::Core; using namespace Opie::Core::Internal; struct yopy_button yopy_buttons [] = { { Qt::Key_F10, QT_TRANSLATE_NOOP( "Button", "Action Button" ), "devicebuttons/yopy_action", "datebook", "nextView()", "today", "raise()" }, { Qt::Key_F11, QT_TRANSLATE_NOOP( "Button", "OK Button" ), "devicebuttons/yopy_ok", "addressbook", "raise()", "addressbook", "beamBusinessCard()" }, { Qt::Key_F12, QT_TRANSLATE_NOOP( "Button", "End Button" ), "devicebuttons/yopy_end", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, }; void Yopy::init(const QString&) { d->m_vendorstr = "G.Mate"; d->m_vendor = Vendor_GMate; d->m_modelstr = "Yopy3700"; d->m_model = Model_Yopy_3700; d->m_rotation = Rot0; d->m_systemstr = "Linupy"; d->m_system = System_Linupy; // Distribution detection code now in the base class } void Yopy::initButtons() { if ( d->m_buttons ) return ; d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof( yopy_button ) ); i++ ) { yopy_button *ib = yopy_buttons + i; ODeviceButton b; b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext ) ); b. setPixmap ( Resource::loadPixmap ( ib->pix ) ); b. setFactoryPresetPressedAction ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) ); b. setFactoryPresetHeldAction ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) ); d->m_buttons->append ( b ); } reloadButtonMapping(); - - QCopChannel *sysch = new QCopChannel( "QPE/System", this ); - connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ), - this, SLOT( systemMessage(const QCString&,const QByteArray&) ) ); } bool Yopy::suspend() { /* Opie for Yopy does not implement its own power management at the moment. The public version runs parallel to X, and relies on the existing power management features. */ return false; } bool Yopy::setDisplayBrightness( int bright ) { /* The code here works, but is disabled as the current version runs parallel to X, and relies on the existing backlight demon. */ #if 0 if ( QFile::exists( "/proc/sys/pm/light" ) ) { int fd = ::open( "/proc/sys/pm/light", O_WRONLY ); if ( fd >= 0 ) { if ( bright ) ::write( fd, "1\n", 2 ); else ::write( fd, "0\n", 2 ); ::close( fd ); return true; } } #else Q_UNUSED( bright ) #endif return false; } int Yopy::displayBrightnessResolution() const { return 2; } diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp index 733479e..ebe1949 100644 --- a/libopie2/opiecore/device/odevice_zaurus.cpp +++ b/libopie2/opiecore/device/odevice_zaurus.cpp @@ -177,132 +177,128 @@ void Zaurus::init(const QString& cpu_info) } else if ( model == "SHARP Tosa" ) { d->m_model = Model_Zaurus_SL6000; d->m_modelstr = "Zaurus SL-6000"; } else { d->m_model = Model_Zaurus_SL5500; d->m_modelstr = "Unkown Zaurus"; } // set initial rotation switch ( d->m_model ) { case Model_Zaurus_SL6000: case Model_Zaurus_SLA300: d->m_rotation = Rot0; break; case Model_Zaurus_SLC7x0: d->m_rotation = rotation(); d->m_direction = direction(); break; case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: d->m_rotation = Rot270; break; } m_leds [0] = Led_Off; } void Zaurus::initButtons() { if ( d->m_buttons ) return; d->m_buttons = new QValueList <ODeviceButton>; struct z_button * pz_buttons; int buttoncount; switch ( d->m_model ) { case Model_Zaurus_SLC7x0: pz_buttons = z_buttons_c700; buttoncount = ARRAY_SIZE(z_buttons_c700); break; default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); break; } for ( int i = 0; i < buttoncount; i++ ) { struct z_button *zb = pz_buttons + i; ODeviceButton b; b. setKeycode ( zb->code ); b. setUserText ( QObject::tr ( "Button", zb->utext )); b. setPixmap ( Resource::loadPixmap ( zb->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ), zb->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ), zb->fheldaction )); d->m_buttons->append ( b ); } reloadButtonMapping(); - - QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); - connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), - this, SLOT( systemMessage(const QCString&,const QByteArray&))); } #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> //#include <asm/sharp_char.h> // including kernel headers is evil ... #define SHARP_DEV_IOCTL_COMMAND_START 0x5680 #define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ #define SHARP_BUZ_KEYSOUND 2 /* key sound */ #define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ /* --- for SHARP_BUZZER device --- */ //#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) //#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZZER_SETVOLUME (SHARP_BUZZER_IOCTL_START+1) #define SHARP_BUZZER_GETVOLUME (SHARP_BUZZER_IOCTL_START+2) #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3) #define SHARP_BUZZER_SETMUTE (SHARP_BUZZER_IOCTL_START+4) #define SHARP_BUZZER_STOPSOUND (SHARP_BUZZER_IOCTL_START+5) //#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ //#define SHARP_BUZ_KEYSOUND 2 /* key sound */ //#define SHARP_PDA_ILLCLICKSOUND 3 /* illegal click */ //#define SHARP_PDA_WARNSOUND 4 /* warning occurred */ //#define SHARP_PDA_ERRORSOUND 5 /* error occurred */ //#define SHARP_PDA_CRITICALSOUND 6 /* critical error occurred */ //#define SHARP_PDA_SYSSTARTSOUND 7 /* system start */ //#define SHARP_PDA_SYSTEMENDSOUND 8 /* system shutdown */ //#define SHARP_PDA_APPSTART 9 /* application start */ //#define SHARP_PDA_APPQUIT 10 /* application ends */ //#define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ //#define SHARP_BUZ_DAILY_ALARM 12 /* daily alarm */ //#define SHARP_BUZ_GOT_PHONE_CALL 13 /* phone call sound */ //#define SHARP_BUZ_GOT_MAIL 14 /* mail sound */ // #define SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_LED_SETSTATUS (SHARP_LED_IOCTL_START+1) #define SHARP_IOCTL_GET_ROTATION 0x413c typedef struct sharp_led_status { int which; /* select which LED status is wanted. */ int status; /* set new led status if you call SHARP_LED_SETSTATUS */ } sharp_led_status; #define SHARP_LED_MAIL_EXISTS 9 /* mail status (exists or not) */ #define LED_MAIL_NO_UNREAD_MAIL 0 /* for SHARP_LED_MAIL_EXISTS */ #define LED_MAIL_NEWMAIL_EXISTS 1 /* for SHARP_LED_MAIL_EXISTS */ #define LED_MAIL_UNREAD_MAIL_EX 2 /* for SHARP_LED_MAIL_EXISTS */ // #include <asm/sharp_apm.h> // including kernel headers is evil ... |