summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--noncore/apps/opie-console/atconfigdialog.cpp1
-rw-r--r--noncore/apps/opie-console/dialdialog.cpp1
-rw-r--r--noncore/apps/opie-console/dialer.cpp26
-rw-r--r--noncore/apps/opie-console/io_layer.h6
-rw-r--r--noncore/apps/opie-console/io_modem.h2
-rw-r--r--noncore/apps/opie-console/io_serial.cpp6
-rw-r--r--noncore/apps/opie-console/modemconfigwidget.cpp9
-rw-r--r--noncore/apps/opie-console/profileeditordialog.cpp4
8 files changed, 30 insertions, 25 deletions
diff --git a/noncore/apps/opie-console/atconfigdialog.cpp b/noncore/apps/opie-console/atconfigdialog.cpp
index 5c02692..e683ab3 100644
--- a/noncore/apps/opie-console/atconfigdialog.cpp
+++ b/noncore/apps/opie-console/atconfigdialog.cpp
@@ -92,124 +92,125 @@ QWidget* ATConfigDialog::tab0( QWidget* parent) {
hangupLine = new QLineEdit( returnWidget );
layout->addWidget( hangupLabel, 9, 0 );
layout->addWidget( hangupLine, 9, 1 );
sv->addChild( returnWidget );
return sv;
}
QWidget* ATConfigDialog::tab1( QWidget* parent ) {
QWidget *returnWidget = new QWidget( parent );
QGridLayout *layout = new QGridLayout( returnWidget, 8, 2 );
QLabel *dialTimeLabel = new QLabel( tr("Dial time " ), returnWidget );
dialTimeSpin = new QSpinBox( returnWidget );
layout->addWidget( dialTimeLabel, 0, 0 );
layout->addWidget( dialTimeSpin, 0, 1 );
QLabel *delayRedialLabel = new QLabel( tr("Delay before redial " ), returnWidget );
delayRedialSpin = new QSpinBox( returnWidget );
layout->addWidget( delayRedialLabel, 1, 0 );
layout->addWidget( delayRedialSpin, 1, 1 );
QLabel *numberTriesLabel = new QLabel( tr("Number of tries " ), returnWidget );
numberTriesSpin = new QSpinBox( returnWidget );
layout->addWidget( numberTriesLabel, 2, 0 );
layout->addWidget( numberTriesSpin, 2, 1 );
QLabel *dtrDropTimeLabel = new QLabel( tr("DTR drop time (0=no) " ), returnWidget );
dtrDropTimeSpin = new QSpinBox( returnWidget );
layout->addWidget( dtrDropTimeLabel, 3, 0 );
layout->addWidget( dtrDropTimeSpin, 3, 1 );
QLabel *bpsDetectLabel = new QLabel( tr("Auto bps detect " ), returnWidget );
bpsDetectBox = new QComboBox( returnWidget );
layout->addWidget( bpsDetectLabel, 4, 0 );
layout->addWidget( bpsDetectBox, 4, 1 );
bpsDetectBox->insertItem( tr("No") );
bpsDetectBox->insertItem( tr("Yes") );
QLabel *dcdLinesLabel = new QLabel( tr("Modem has DCD line " ), returnWidget );
dcdLinesBox = new QComboBox( returnWidget );
layout->addWidget( dcdLinesLabel, 5, 0 );
layout->addWidget( dcdLinesBox, 5, 1 );
dcdLinesBox->insertItem( tr("No") );
dcdLinesBox->insertItem( tr("Yes") );
QLabel *multiLineUntagLabel = new QLabel( tr("Multi-line untag " ), returnWidget );
multiLineUntagBox = new QComboBox( returnWidget );
layout->addWidget( multiLineUntagLabel, 6, 0 );
layout->addWidget( multiLineUntagBox, 6, 1 );
multiLineUntagBox->insertItem( tr("No") );
multiLineUntagBox->insertItem( tr("Yes") );
return returnWidget;
}
void ATConfigDialog::readConfig( const Profile& config ) {
+ qWarning("config in atconfigdialog");
initStringLine->setText( config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING ) );
resetStringLine->setText( config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING ) );
dialPref1Line->setText( config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ) );
dialSuf1Line->setText( config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
dialPref2Line->setText( config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 ) );
dialSuf2Line->setText( config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
dialPref3Line->setText( config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 ) );
dialSuf3Line->setText( config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
connectLine->setText( config.readEntry("DefaultConnect", MODEM_DEFAULT_CONNECT_STRING ) );
hangupLine->setText( config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) );
dialTimeSpin->setValue( config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME ) );
delayRedialSpin->setValue( config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL ) );
numberTriesSpin->setValue( config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES ) );
dtrDropTimeSpin->setValue( config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME ) );
bpsDetectBox->setCurrentItem( config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT ) );
dcdLinesBox->setCurrentItem( config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES ) );
multiLineUntagBox->setCurrentItem( config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG ) );
// Not implemented yet
resetStringLine->setEnabled(false);
dialSuf1Line->setEnabled(false);
dialPref2Line->setEnabled(false);
dialSuf2Line->setEnabled(false);
dialPref3Line->setEnabled(false);
dialSuf3Line->setEnabled(false);
dialTimeSpin->setEnabled(false);
delayRedialSpin->setEnabled(false);
numberTriesSpin->setEnabled(false);
dtrDropTimeSpin->setEnabled(false);
bpsDetectBox->setEnabled(false);
dcdLinesBox->setEnabled(false);
multiLineUntagBox->setEnabled(false);
}
void ATConfigDialog::writeConfig( Profile& config ) {
config.writeEntry( "InitString", initStringLine->text() );
config.writeEntry( "ResetString", resetStringLine->text() );
config.writeEntry( "DialPrefix1", dialPref1Line->text() );
config.writeEntry( "DialSuffix1", dialSuf1Line->text() );
config.writeEntry( "DialPrefix2", dialPref2Line->text() );
config.writeEntry( "DialSuffix2", dialSuf2Line->text() );
config.writeEntry( "DialPrefix3", dialPref3Line->text() );
config.writeEntry( "DialSuffix3", dialSuf3Line->text() );
config.writeEntry( "DefaultConnect", connectLine->text() );
config.writeEntry( "HangupString", hangupLine->text() );
config.writeEntry( "DialTime", dialTimeSpin->value() );
config.writeEntry( "DelayRedial", delayRedialSpin->value() );
config.writeEntry( "NumberTries", numberTriesSpin->value() );
config.writeEntry( "DTRDRopTime", dtrDropTimeSpin->value() );
config.writeEntry( "BPSDetect", bpsDetectBox->currentItem() );
config.writeEntry( "DCDLines", dcdLinesBox->currentItem() );
config.writeEntry( "MultiLineUntag", multiLineUntagBox->currentItem() );
}
ATConfigDialog::~ATConfigDialog() {
}
diff --git a/noncore/apps/opie-console/dialdialog.cpp b/noncore/apps/opie-console/dialdialog.cpp
index ac1e1db..b91727b 100644
--- a/noncore/apps/opie-console/dialdialog.cpp
+++ b/noncore/apps/opie-console/dialdialog.cpp
@@ -1,86 +1,87 @@
#include <qlayout.h>
#include <qlabel.h>
#include <qcombobox.h>
#include <qscrollview.h>
#include <qpushbutton.h>
#include <qfont.h>
#include <qbuttongroup.h>
#include "dialdialog.h"
DialDialog::DialDialog( QWidget* parent, const char* name, bool modal, WFlags fl )
: QDialog( parent, name, modal, fl ) {
setCaption( tr( "Enter number" ) );
QVBoxLayout *mainLayout = new QVBoxLayout( this );
QLabel *textLabel = new QLabel( this );
+ textLabel->setTextFormat( QLabel::RichText );
textLabel->setText( tr("Enter the number you want to dial. When finished, press ok") );
m_dialLine = new QLineEdit( this );
m_dialLine->setReadOnly( true );
m_dialLine->setFrame( false );
m_dialLine->setAlignment( Qt::AlignLeft );
QFont dialLine_font( m_dialLine->font() );
dialLine_font.setBold( TRUE );
dialLine_font.setPointSize( 18 );
m_dialLine->setFont( dialLine_font );
QWidget* dialWidget = new QWidget( this );
QGridLayout *layout = new QGridLayout( dialWidget , 4, 3 );
QButtonGroup *dialButtons = new QButtonGroup( );
QPushButton *number0 = new QPushButton( dialWidget );
number0->setText( QString( "0" ) );
QFont number0_font( number0->font() );
number0_font.setBold( TRUE );
number0->setFont( number0_font );
layout->addWidget( number0, 4, 1 );
dialButtons->insert( number0 );
int x = 0, y = 0;
for ( int i = 0 ; i < 9; i++ ) {
QPushButton *number = new QPushButton( dialWidget );
number->setText( QString( "%1" ).arg( i + 1 ) );
QFont number_font( number->font() );
number_font.setBold( TRUE );
number->setFont( number_font );
dialButtons->insert( number );
layout->addWidget( number, x, y );
if ( y < 2 ) {
y++;
} else {
x++;
y = 0;
}
}
connect( dialButtons, SIGNAL( clicked( int ) ), this, SLOT( slotEnterNumber( int ) ) );
mainLayout->addStretch( 2 );
mainLayout->addWidget( textLabel );
mainLayout->addStretch( 1 );
mainLayout->addWidget( m_dialLine );
mainLayout->addStretch( 2 );
mainLayout->addWidget( dialWidget );
mainLayout->addStretch( 4 );
}
void DialDialog::slotEnterNumber( int number ) {
// pretty stupid, just for testing .-)
m_number.append(QString("%1").arg(number));
setNumber(m_number);
}
diff --git a/noncore/apps/opie-console/dialer.cpp b/noncore/apps/opie-console/dialer.cpp
index 8524422..67ad10e 100644
--- a/noncore/apps/opie-console/dialer.cpp
+++ b/noncore/apps/opie-console/dialer.cpp
@@ -1,255 +1,251 @@
#include "dialer.h"
#include <qlayout.h>
#include <qprogressbar.h>
#include <qlabel.h>
#include <qpushbutton.h>
#include <qapp.h>
#include <qtimer.h>
#include <qmessagebox.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
+#include "io_modem.h"
+
// State machine: | When an error occurs, we don't have to
// | reset everything.
// (init) <------+ | But if the user wants to reset,
// | | | we stop dialing immediately.
// v | |
// (options) ----+ | Following the state machine is necessary
// | \ | to get determinable results.
// v ^ |
// (dial) ----+ |
// | ^ |
// v | |
// (online) --+ |
// | |
// v |
// from atconfigdialog
//initStringLine->setText( config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING ) );
//resetStringLine->setText( config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING ) );
//dialPref1Line->setText( config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ) );
//dialSuf1Line->setText( config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
//dialPref2Line->setText( config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 ) );
//dialSuf2Line->setText( config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
//dialPref3Line->setText( config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 ) );
//dialSuf3Line->setText( config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 ) );
//connectLine->setText( config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING ) );
//hangupLine->setText( config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) );
// from modemconfigwidget
//int rad_flow = prof.readNumEntry("Flow");
//int rad_parity = prof.readNumEntry("Parity");
//int speed = prof.readNumEntry("Speed");
//QString number = prof.readEntry("Number");
Dialer::Dialer(const Profile& profile, int fd, QWidget *parent, const char *name)
: QDialog(parent, name, true), m_fd(fd), m_profile(profile)
{
QVBoxLayout *vbox;
QLabel *desc;
- //m_profile.writeEntry("InitString", "ATZ");
- //m_profile.writeEntry("DialPrefix1", "ATDT");
- //m_profile.writeEntry("Termination", "\n");
usercancel = 0;
cleanshutdown = 0;
-// fcntl(m_fd, F_SETFL, O_NONBLOCK);
desc = new QLabel(QObject::tr("Dialing number: %1").arg(m_profile.readEntry("Number")), this);
progress = new QProgressBar(this);
status = new QLabel("", this);
status->setFrameStyle(QFrame::Panel | QFrame::Sunken);
cancel = new QPushButton(QObject::tr("Cancel"), this);
vbox = new QVBoxLayout(this, 2);
vbox->add(desc);
vbox->add(progress);
vbox->add(status);
vbox->add(cancel);
connect(cancel, SIGNAL(clicked()), SLOT(slotCancel()));
show();
QTimer::singleShot(500, this, SLOT(slotAutostart()));
}
Dialer::~Dialer()
{
}
void Dialer::setHangupOnly()
{
state = state_cancel;
usercancel = 1;
- send("+++ATH\r");
+ send( m_profile.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING )+"\r" );
}
void Dialer::slotCancel()
{
if(state != state_online)
{
usercancel = 1;
reset();
}
else {
accept();
}
}
void Dialer::reset()
{
qWarning("reset");
switchState(state_cancel);
}
void Dialer::slotAutostart()
{
//state = state_preinit;
dial(m_profile.readEntry("Number"));
}
void Dialer::dial(const QString& number)
{
while(state != state_online)
{
if(!usercancel)
{
state = state_preinit;
trydial(number);
}
else break;
}
if(usercancel)
{
// modem hangup
trydial(QString::null);
reject();
}
}
void Dialer::trydial(const QString& number)
{
qWarning("TryDial:%s", number.latin1() );
if(state != state_cancel) switchState(state_preinit);
if(cleanshutdown)
{
- qWarning("HangupString " + m_profile.readEntry("HangupString"));
- //send(m_profile.readEntry("HangupString"));
- send("+++ATH\r");
- //send("");
+ qWarning("HangupString " + m_profile.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING));
+ send(m_profile.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING ) + "\r");
}
if(state != state_cancel)
{
switchState(state_init);
- //send("ATZ");
- qWarning("Init String " + m_profile.readEntry("InitString") );
-// send(m_profile.readEntry("InitString", "AT"));
- send("AT\r");
+// qWarning("Init String " + m_profile.readEntry("InitString") );
+ send(m_profile.readEntry("InitString",MODEM_DEFAULT_INIT_STRING ) + "\r");
QString response2 = receive();
if(!response2.contains("\nOK\r"))
reset();
}
/* if(state != state_cancel)
{
switchState(state_options);
qWarning("ATM3l3");
send("ATM3L3\r");
QString response3 = receive();
if(!response3.contains("\nOK\r"))
reset();
}
*/
if(state != state_cancel)
{
switchState(state_dialtone);
send("ATX1\r");
QString response4 = receive();
if(!response4.contains("\nOK\r"))
reset();
}
if(state != state_cancel)
{
qWarning("progress");
switchState(state_dialing);
- send(QString("ATDT %1\r").arg(number));
-// send(QString("%1 %2").arg(m_profile.readEntry("DialPrefix1")).arg(number));
+// send(QString("ATDT %1\r").arg(number));
+ send(QString("%1 %2\r").arg(m_profile.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 ))
+ .arg(number));
+
QString response5 = receive();
if(!response5.contains("CONNECT") )
{
if(response5.contains("BUSY"))
switchState(state_dialing);
else
{
QMessageBox::warning(this,
QObject::tr("Failure"),
QObject::tr("Dialing the number failed."));
slotCancel();
}
}
}
if(state != state_cancel)
{
state = state_online;
slotCancel();
}
}
void Dialer::send(const QString& msg)
{
QString m = msg;
int bytes;
QString termination;
qWarning("Sending: %s", m.latin1());
/* termination = "\r";
//termination = m_profile.readEntry("Termination");
if(termination == "\n") m = m + "\n";
else if(termination == "\r") m = m + "\r";
else m = m + "\r\n";
*/
m = m.replace(QRegExp("\n"), "\r");
bytes = ::write(m_fd, m.local8Bit(), strlen(m.local8Bit()));
if(bytes < 0)
{
reset();
}
}
QString Dialer::receive()
{
QString buf;
char buffer[1024];
int ret;
int counter = 0;
while(1)
{
ret = ::read(m_fd, buffer, sizeof(buffer));
if(ret > 0)
{
for(int i = 0; i < ret; i++)
buffer[i] = buffer[i] & 0x7F;
buffer[ret] = 0;
qWarning("Got: %s", buffer);
buf.append(QString(buffer));
diff --git a/noncore/apps/opie-console/io_layer.h b/noncore/apps/opie-console/io_layer.h
index af61099..ed4478b 100644
--- a/noncore/apps/opie-console/io_layer.h
+++ b/noncore/apps/opie-console/io_layer.h
@@ -33,94 +33,100 @@ public:
};
/**
* a small c'tor
*/
IOLayer();
/**
* create an IOLayer instance from a config file
* the currently set group stores the profile/session
* information
*/
IOLayer( const Profile& );
/**
* destructor
*/
virtual ~IOLayer();
/**
* a small internal identifier
*/
virtual QString identifier() const = 0;
/**
* a short name
*/
virtual QString name() const = 0;
/**
* a file descriptor which opens
* the device for io but does not
* do any ioctling on it...
* and it'll stop listening to the before opened
* device
*/
virtual int rawIO()const;
/**
* will close the rawIO stuff
* and will listen to it's data again...
*/
virtual void closeRawIO(int);
/**
* What does the IOLayer support?
* Bits are related to features
*/
virtual QBitArray supports()const = 0;
virtual bool isConnected() = 0;
signals:
/**
* received input as QCString
*/
virtual void received( const QByteArray& );
/**
* an error occured
* int for the error number
* and QString for a text
*/
virtual void error( int, const QString& );
+
virtual void closed();
+
+ /* signal emitted for closure of the IOLayer
+ * for some reasons
+ */
+ virtual void closed(IOLayer*);
public slots:
/**
* send a QCString to the device
*/
virtual void send( const QByteArray& ) = 0;
/**
* bool open
*/
virtual bool open() = 0;
/**
* close the io
*/
virtual void close() = 0;
/**
* closes and reloads the settings
*/
virtual void reload( const Profile& ) = 0;
/**
* set the size
* needed for pty
*/
virtual void setSize(int lines, int cols );
};
#endif
diff --git a/noncore/apps/opie-console/io_modem.h b/noncore/apps/opie-console/io_modem.h
index 1328706..17228bd 100644
--- a/noncore/apps/opie-console/io_modem.h
+++ b/noncore/apps/opie-console/io_modem.h
@@ -1,71 +1,71 @@
#ifndef OPIE_IO_MODEM
#define OPIE_IO_MODEM
#include <opie/oprocess.h>
#include "io_serial.h"
#include "profile.h"
/* Default values to be used if the profile information is incomplete */
#define MODEM_DEFAULT_DEVICE "/dev/ttyS0"
#define MODEM_DEFAULT_BAUD 9600
#define MODEM_DEFAULT_PARITY 0
#define MODEM_DEFAULT_DBITS 8
#define MODEM_DEFAULT_SBITS 1
#define MODEM_DEFAULT_FLOW 0
-#define MODEM_DEFAULT_INIT_STRING "ATZ"
+#define MODEM_DEFAULT_INIT_STRING "AT"
#define MODEM_DEFAULT_RESET_STRING "ATZ~"
#define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
#define MODEM_DEFAULT_DIAL_SUFFIX1 ""
#define MODEM_DEFAULT_DIAL_PREFIX2 ""
#define MODEM_DEFAULT_DIAL_SUFFIX2 ""
#define MODEM_DEFAULT_DIAL_PREFIX3 ""
#define MODEM_DEFAULT_DIAL_SUFFIX3 ""
#define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
#define MODEM_DEFAULT_HANGUP_STRING "+++ATH"
#define MODEM_DEFAULT_CANCEL_STRING ""
#define MODEM_DEFAULT_DIAL_TIME 45
#define MODEM_DEFAULT_DELAY_REDIAL 2
#define MODEM_DEFAULT_NUMBER_TRIES 10
#define MODEM_DEFAULT_DTR_DROP_TIME 1
#define MODEM_DEFAULT_BPS_DETECT 0 // bool
#define MODEM_DEFAULT_DCD_LINES 1 //bool
#define MODEM_DEFAULT_MULTI_LINE_UNTAG 0 // bool
/* IOSerial implements a RS232 IO Layer */
class IOModem : public IOSerial {
Q_OBJECT
public:
IOModem(const Profile &);
~IOModem();
QString identifier() const;
QString name() const;
signals:
void received(const QByteArray &);
void error(int, const QString &);
public slots:
bool open();
void close();
void reload(const Profile &);
private:
QString m_initString, m_resetString, m_dialPref1, m_dialSuf1, m_dialPref2,
m_dialSuf2, m_dialPref3, m_dialSuf3, m_connect, m_hangup, m_cancel;
int m_dialTime, m_delayRedial, m_numberTries, m_dtrDropTime,
m_bpsDetect, m_dcdLines, m_multiLineUntag;
Profile m_profile;
private slots:
void slotExited(OProcess* proc);
};
#endif
diff --git a/noncore/apps/opie-console/io_serial.cpp b/noncore/apps/opie-console/io_serial.cpp
index 03e92dd..ddd4994 100644
--- a/noncore/apps/opie-console/io_serial.cpp
+++ b/noncore/apps/opie-console/io_serial.cpp
@@ -105,131 +105,127 @@ bool IOSerial::open() {
/* Parity */
tty.c_cflag &= ~(PARENB | PARODD);
if (m_parity & ParityEven)
tty.c_cflag |= PARENB;
else if (m_parity & ParityOdd)
tty.c_cflag |= (PARENB | PARODD);
/* Set the changes */
tcsetattr(m_fd, TCSANOW, &tty);
/* Notifications on read & errors */
m_read = new QSocketNotifier(m_fd, QSocketNotifier::Read, this);
m_error = new QSocketNotifier(m_fd, QSocketNotifier::Exception, this);
connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
m_connected = false;
return TRUE;
} else {
emit error(Refuse, tr("Device is already connected"));
m_fd = 0;
return FALSE;
}
}
void IOSerial::reload(const Profile &config) {
m_device = config.readEntry("Device", SERIAL_DEFAULT_DEVICE);
m_baud = config.readNumEntry("Speed", SERIAL_DEFAULT_BAUD);
m_parity = config.readNumEntry("Parity", SERIAL_DEFAULT_PARITY);
m_dbits = config.readNumEntry("DataBits", SERIAL_DEFAULT_DBITS);
m_sbits = config.readNumEntry("StopBits", SERIAL_DEFAULT_SBITS);
m_flow = config.readNumEntry("Flow", SERIAL_DEFAULT_FLOW);
}
int IOSerial::baud(int baud) const {
switch (baud) {
case 300: return B300; break;
case 600: return B600; break;
case 1200: return B1200; break;
case 2400: return B2400; break;
case 4800: return B4800; break;
case 9600: return B9600; break;
case 19200: return B19200; break;
case 38400: return B38400; break;
case 57600: return B57600; break;
case 115200: return B115200; break;
}
return -1;
}
void IOSerial::errorOccured() {
emit error(ClosedUnexpected, strerror(errno));
close();
}
void IOSerial::dataArrived() {
QByteArray array(4097);
int len = read(m_fd, array.data(), 4096);
if (len == 0)
close();
if (len < 0)
return;
- qWarning("got from layer");
- for (int i = 0; i < len; i++ ) {
- printf("%c", array[i] );
- }
- printf("\n");
+
array.resize( len );
emit received(array);
}
QString IOSerial::identifier() const {
return "serial";
}
QString IOSerial::name() const {
return "RS232 Serial IO Layer";
}
int IOSerial::rawIO()const {
if (m_read )
disconnect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
if (m_error )
disconnect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
int fd = ::open(m_device, O_RDWR );
return fd;
};
void IOSerial::closeRawIO(int fd) {
if (m_read )
connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
if (m_error )
connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
::close( fd );
}
QBitArray IOSerial::supports()const {
QBitArray ar(3);
ar[0] = ar[2] = 0;
ar[1] = 1;
return ar;
}
bool IOSerial::isConnected() {
return m_connected;
}
/*
* this is used to give the
* class below IOSerial
* the possibility of
* exclusive usage
*/
void IOSerial::internDetach() {
if (m_read )
disconnect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
if (m_error )
disconnect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
}
/*
* give power back
*/
void IOSerial::internAttach() {
if (m_read )
connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
if (m_error )
connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
}
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index 37eb184..f7fb6f3 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -71,182 +71,187 @@ void ModemConfigWidget::load( const Profile& prof ) {
int dbits = prof.readNumEntry("DataBits");
int sbits = prof.readNumEntry("StopBits");
QString number = prof.readEntry( "Number" );
if ( !number.isEmpty() ) {
m_telNumber->setText( number );
}
if ( rad_flow == 1 ) {
m_base->setFlow( IOLayerBase::Hardware );
} else if (rad_flow == 2) {
m_base->setFlow( IOLayerBase::Software );
} else if (rad_flow == 0) {
m_base->setFlow( IOLayerBase::None );
}
if ( rad_parity == 1 ) {
m_base->setParity( IOLayerBase::Even );
} else if ( rad_parity == 2 ){
m_base->setParity( IOLayerBase::Odd );
} else {
m_base->setParity( IOLayerBase::NonePar );
}
switch( speed ) {
case 115200:
m_base->setSpeed( IOLayerBase::Baud_115200 );
break;
case 57600:
m_base->setSpeed( IOLayerBase::Baud_57600 );
break;
case 38400:
m_base->setSpeed( IOLayerBase::Baud_38400 );
break;
case 19200:
m_base->setSpeed( IOLayerBase::Baud_19200 );
break;
case 9600:
default:
m_base->setSpeed( IOLayerBase::Baud_9600 );
break;
}
if ( dbits == 5) {
m_base->setData( IOLayerBase::Data_Five );
} else if (rad_flow == 6) {
m_base->setData( IOLayerBase::Data_Six );
} else if (rad_flow == 7) {
m_base->setData( IOLayerBase::Data_Seven );
} else {
m_base->setData( IOLayerBase::Data_Eight );
}
if ( sbits == 2) {
m_base->setStop( IOLayerBase::Stop_Two );
} else if ( sbits == 15 ) {
m_base->setStop( IOLayerBase::Stop_OnePointFive );
} else {
m_base->setStop( IOLayerBase::Stop_One );
}
-
+ atConf->readConfig( prof );
if ( prof.readEntry( "Device" ).isEmpty() ) {
+ qWarning("device empty!");
return;
}
setCurrent( prof.readEntry( "Device" ), m_deviceCmb );
- atConf->readConfig( prof );
+
}
/*
* save speed,
* flow,
* parity
*/
void ModemConfigWidget::save( Profile& prof ) {
int flow, parity, speed, data, stop;
flow = parity = speed = data = stop = 0;
prof.writeEntry( "Device", m_deviceCmb->currentText() );
switch( m_base->flow() ) {
case IOLayerBase::None:
flow = 0;
break;
case IOLayerBase::Software:
flow = 2;
break;
case IOLayerBase::Hardware:
flow = 1;
break;
}
switch( m_base->parity() ) {
case IOLayerBase::Odd:
parity = 2;
break;
case IOLayerBase::Even:
parity = 1;
break;
case IOLayerBase::NonePar:
parity = 0;
break;
}
switch( m_base->speed() ) {
case IOLayerBase::Baud_115200:
speed = 115200;
break;
case IOLayerBase::Baud_57600:
speed = 57600;
break;
case IOLayerBase::Baud_38400:
speed = 38400;
break;
case IOLayerBase::Baud_19200:
speed = 19200;
break;
case IOLayerBase::Baud_9600:
speed = 9600;
break;
}
switch( m_base->data() ) {
case IOLayerBase::Data_Five:
data = 5;
break;
case IOLayerBase::Data_Six:
data = 6;
break;
case IOLayerBase::Data_Seven:
data = 7;
break;
case IOLayerBase::Data_Eight:
data = 8;
break;
}
switch( m_base->stop() ) {
case IOLayerBase::Stop_One:
stop = 1;
break;
case IOLayerBase::Stop_OnePointFive:
stop = 15;
break;
case IOLayerBase::Stop_Two:
stop = 2;
break;
}
prof.writeEntry( "Flow", flow );
prof.writeEntry( "Parity", parity );
prof.writeEntry( "Speed", speed );
prof.writeEntry("DataBits", data);
prof.writeEntry("StopBits", stop);
prof.writeEntry( "Number", m_telNumber->text() );
atConf->writeConfig(prof);
}
void ModemConfigWidget::slotAT() {
// ATConfigDialog conf( this, "ATConfig", true );
+ // josef/Max I know why don't you create the stuff on the stack
+ // but making it a TopLevel Dialog and ignoring
+ // cancel is not fun either...
+ // what to do? FIXME!!! -zecke
atConf->showMaximized();
if ( atConf->exec() != QDialog::Accepted ) {
// reload old settings
}
}
void ModemConfigWidget::slotDial() {
DialDialog dial( this, "DialConfig", true );
if(!m_telNumber->text().isEmpty()) {
dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ \\.\\,]"), ""));
}
dial.showMaximized();
if ( dial.exec() == QDialog::Accepted ) {
m_telNumber->setText( dial.number() );
}
}
diff --git a/noncore/apps/opie-console/profileeditordialog.cpp b/noncore/apps/opie-console/profileeditordialog.cpp
index 36daaef..fd04b6b 100644
--- a/noncore/apps/opie-console/profileeditordialog.cpp
+++ b/noncore/apps/opie-console/profileeditordialog.cpp
@@ -5,133 +5,133 @@
#include <qstringlist.h>
#include <qcombobox.h>
#include <qcheckbox.h>
#include <qscrollview.h>
#include "metafactory.h"
#include "profileeditordialog.h"
namespace {
void setCurrent( const QString& str, QComboBox* bo ) {
for (int i = 0; i < bo->count(); i++ ) {
if ( bo->text(i) == str ) {
bo->setCurrentItem( i );
}
}
};
}
ProfileEditorDialog::ProfileEditorDialog( MetaFactory* fact,
const Profile& prof )
: QDialog(0, 0, TRUE), m_fact( fact ), m_prof( prof )
{
initUI();
// Apply current profile
// plugin_plugin->load(profile);
// ... (reset profile name line edit etc.)
}
ProfileEditorDialog::ProfileEditorDialog( MetaFactory* fact )
: QDialog(0, 0, TRUE), m_fact( fact )
{
// Default profile
m_prof = Profile("New Profile", "serial", "default", Profile::Black, Profile::White, Profile::VT102);
initUI();
// Apply current profile
// plugin_plugin->load(profile);
}
Profile ProfileEditorDialog::profile() const
{
return m_prof;
}
void ProfileEditorDialog::initUI()
{
m_con = m_term = m_key = 0l;
QVBoxLayout *mainLayout = new QVBoxLayout( this );
tabWidget = new OTabWidget( this );
tabWidget->setTabStyle(OTabWidget::TextTab);
mainLayout->add(tabWidget);
/* base tabs */
tabprof = new QWidget(this);
m_tabTerm = new QWidget(this);
m_tabCon = new QWidget(this);
m_tabKey = new QWidget(this);
m_svCon = new QScrollView( m_tabCon );
m_svCon->setResizePolicy( QScrollView::AutoOneFit );
- m_svCon->setHScrollBarMode( QScrollView::AlwaysOff );
+ //m_svCon->setHScrollBarMode( QScrollView::AlwaysOff );
m_svCon->setFrameShape( QFrame::NoFrame );
m_svTerm = new QScrollView( m_tabTerm );
m_svTerm->setResizePolicy( QScrollView::AutoOneFit );
- m_svTerm->setHScrollBarMode( QScrollView::AlwaysOff );
+ //m_svTerm->setHScrollBarMode( QScrollView::AlwaysOff );
m_svTerm->setFrameShape( QFrame::NoFrame );
/* base layout for tabs */
m_layCon = new QHBoxLayout( m_tabCon , 2 );
m_layTerm = new QHBoxLayout( m_tabTerm, 2 );
m_layKey = new QHBoxLayout( m_tabKey, 2 );
m_layCon->addWidget( m_svCon );
m_layTerm->addWidget( m_svTerm );
// profile tab
QLabel *name = new QLabel(QObject::tr("Profile name"), tabprof);
m_name = new QLineEdit(tabprof);
QLabel *con = new QLabel(tr("Connection"), tabprof );
QLabel *term = new QLabel(tr("Terminal"), tabprof );
m_conCmb = new QComboBox( tabprof );
m_termCmb = new QComboBox( tabprof );
m_autoConnect = new QCheckBox(tr("Auto connect after load"), tabprof);
// layouting
QVBoxLayout *vbox3 = new QVBoxLayout(tabprof, 2);
vbox3->add(name);
vbox3->add(m_name);
vbox3->add(con );
vbox3->add(m_conCmb );
vbox3->add(term );
vbox3->add(m_termCmb );
vbox3->add(m_autoConnect);
vbox3->addStretch(1);
m_showconntab = 0;
tabWidget->addTab(tabprof, "", QObject::tr("Profile"));
tabWidget->addTab(m_tabCon, "", QObject::tr("Connection"));
tabWidget->addTab(m_tabTerm, "", QObject::tr("Terminal"));
tabWidget->addTab(m_tabKey, "", QObject::tr("Special Keys"));
tabWidget->setCurrentTab( tabprof );
// fill the comboboxes
QStringList list = m_fact->connectionWidgets();
QStringList::Iterator it;
for (it =list.begin(); it != list.end(); ++it ) {
m_conCmb->insertItem( (*it) );
}
list = m_fact->terminalWidgets();
for (it =list.begin(); it != list.end(); ++it ) {
m_termCmb->insertItem( (*it) );
}
// load profile values
m_name->setText(m_prof.name());
slotConActivated( m_fact->external(m_prof.ioLayerName() ) );
slotTermActivated( m_fact->external(m_prof.terminalName() ) );
slotKeyActivated( "Default Keyboard" );
setCurrent( m_fact->external(m_prof.ioLayerName() ), m_conCmb );
setCurrent( m_fact->external(m_prof.terminalName() ), m_termCmb );
m_autoConnect->setChecked(m_prof.autoConnect());
// signal and slots
connect(m_conCmb, SIGNAL(activated(const QString& ) ),
this, SLOT(slotConActivated(const QString&) ) );
connect(m_termCmb, SIGNAL(activated(const QString& ) ),