| -rw-r--r-- | noncore/settings/networksettings/ppp/modem.cpp | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/noncore/settings/networksettings/ppp/modem.cpp b/noncore/settings/networksettings/ppp/modem.cpp index 2da9b14..d23fee4 100644 --- a/noncore/settings/networksettings/ppp/modem.cpp +++ b/noncore/settings/networksettings/ppp/modem.cpp @@ -223,801 +223,801 @@ bool Modem::opentty() { tty.c_lflag &= ~ICANON; // non-canonical mode tty.c_lflag &= ~(ECHO|ECHOE|ECHOK|ECHOKE); if(_pppdata->flowcontrol() != "None") { if(_pppdata->flowcontrol() == "CRTSCTS") { tty.c_cflag |= CRTSCTS; } else { tty.c_iflag |= IXON | IXOFF; tty.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */ tty.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */ } } else { tty.c_cflag &= ~CRTSCTS; tty.c_iflag &= ~(IXON | IXOFF); } cfsetospeed(&tty, modemspeed()); cfsetispeed(&tty, modemspeed()); tcdrain(modemfd); if(tcsetattr(modemfd, TCSANOW, &tty) < 0){ errmsg = i18n("The modem is busy."); ::close(modemfd); modemfd=-1; return false; } errmsg = i18n("Modem Ready."); return true; } bool Modem::closetty() { if(modemfd >=0 ) { stop(); /* discard data not read or transmitted */ tcflush(modemfd, TCIOFLUSH); if(tcsetattr(modemfd, TCSANOW, &initial_tty) < 0){ errmsg = i18n("Can't restore tty settings: tcsetattr()\n"); ::close(modemfd); modemfd = -1; return false; } ::close(modemfd); modemfd = -1; } return true; } void Modem::readtty(int) { char buffer[200]; unsigned char c; int len; // read data in chunks of up to 200 bytes if((len = ::read(modemfd, buffer, 200)) > 0) { // split buffer into single characters for further processing for(int i = 0; i < len; i++) { c = buffer[i] & 0x7F; emit charWaiting(c); } } } void Modem::notify(const QObject *receiver, const char *member) { connect(this, SIGNAL(charWaiting(unsigned char)), receiver, member); startNotifier(); } void Modem::stop() { disconnect(SIGNAL(charWaiting(unsigned char))); stopNotifier(); } void Modem::startNotifier() { if(modemfd >= 0) { if(sn == 0) { sn = new QSocketNotifier(modemfd, QSocketNotifier::Read, this); connect(sn, SIGNAL(activated(int)), SLOT(readtty(int))); qDebug("QSocketNotifier started!"); } else { qDebug("QSocketNotifier re-enabled!"); sn->setEnabled(true); } } } void Modem::stopNotifier() { if(sn != 0) { sn->setEnabled(false); disconnect(sn); delete sn; sn = 0; qDebug( "QSocketNotifier stopped!" ); } } void Modem::flush() { char c; while(read(modemfd, &c, 1) == 1); } bool Modem::writeChar(unsigned char c) { int s; do { s = write(modemfd, &c, 1); if (s < 0) { qError( "write() in Modem::writeChar failed" ); return false; } } while(s == 0); return true; } bool Modem::writeLine(const char *buf) { int len = strlen(buf); char *b = new char[len+2]; memcpy(b, buf, len); // different modems seem to need different line terminations QString term = _pppdata->enter(); if(term == "LF") b[len++]='\n'; else if(term == "CR") b[len++]='\r'; else if(term == "CR/LF") { b[len++]='\r'; b[len++]='\n'; } int l = len; while(l) { int wr = write(modemfd, &b[len-l], l); if(wr < 0) { // TODO do something meaningful with the error code (or ignore it qError( "write() in Modem::writeLine failed" ); delete[] b; return false; } l -= wr; } delete[] b; return true; } bool Modem::hangup() { // this should really get the modem to hang up and go into command mode // If anyone sees a fault in the following please let me know, since // this is probably the most imporant snippet of code in the whole of // kppp. If people complain about kppp being stuck, this piece of code // is most likely the reason. struct termios temptty; if(modemfd >= 0) { // is this Escape & HangupStr stuff really necessary ? (Harri) if (data_mode) escape_to_command_mode(); // Then hangup command writeLine(_pppdata->modemHangupStr().local8Bit()); usleep(_pppdata->modemInitDelay() * 10000); // 0.01 - 3.0 sec #ifndef DEBUG_WO_DIALING if (sigsetjmp(jmp_buffer, 1) == 0) { // set alarm in case tcsendbreak() hangs signal(SIGALRM, alarm_handler); alarm(2); tcsendbreak(modemfd, 0); alarm(0); signal(SIGALRM, SIG_IGN); } else { // we reach this point if the alarm handler got called closetty(); close(modemfd); modemfd = -1; errmsg = i18n("The modem does not respond."); return false; } #ifndef __svr4__ // drops DTR but doesn't set it afterwards again. not good for init. tcgetattr(modemfd, &temptty); cfsetospeed(&temptty, B0); cfsetispeed(&temptty, B0); tcsetattr(modemfd, TCSAFLUSH, &temptty); #else int modemstat; ioctl(modemfd, TIOCMGET, &modemstat); modemstat &= ~TIOCM_DTR; ioctl(modemfd, TIOCMSET, &modemstat); ioctl(modemfd, TIOCMGET, &modemstat); modemstat |= TIOCM_DTR; ioctl(modemfd, TIOCMSET, &modemstat); #endif usleep(_pppdata->modemInitDelay() * 10000); // 0.01 - 3.0 secs cfsetospeed(&temptty, modemspeed()); cfsetispeed(&temptty, modemspeed()); tcsetattr(modemfd, TCSAFLUSH, &temptty); #endif return true; } else return false; } void Modem::escape_to_command_mode() { // Send Properly bracketed escape code to put the modem back into command state. // A modem will accept AT commands only when it is in command state. // When a modem sends the host the CONNECT string, that signals // that the modem is now in the connect state (no long accepts AT commands.) // Need to send properly timed escape sequence to put modem in command state. // Escape codes and guard times are controlled by S2 and S12 values. // tcflush(modemfd, TCIOFLUSH); // +3 because quiet time must be greater than guard time. usleep((_pppdata->modemEscapeGuardTime()+3)*20000); QCString tmp = _pppdata->modemEscapeStr().local8Bit(); write(modemfd, tmp.data(), tmp.length()); tcflush(modemfd, TCIOFLUSH); usleep((_pppdata->modemEscapeGuardTime()+3)*20000); data_mode = false; } const QString Modem::modemMessage() { return errmsg; } QString Modem::parseModemSpeed(const QString &s) { // this is a small (and bad) parser for modem speeds int rx = -1; int tx = -1; int i; QString result; qDebug( "Modem reported result string: %s", s.latin1()); const int RXMAX = 7; const int TXMAX = 2; QRegExp rrx[RXMAX] = { QRegExp("[0-9]+[:/ ]RX", false), QRegExp("[0-9]+RX", false), QRegExp("[/: -][0-9]+[/: ]", false), QRegExp("[/: -][0-9]+$", false), QRegExp("CARRIER [^0-9]*[0-9]+", false), QRegExp("CONNECT [^0-9]*[0-9]+", false), QRegExp("[0-9]+") // panic mode }; QRegExp trx[TXMAX] = { QRegExp("[0-9]+[:/ ]TX", false), QRegExp("[0-9]+TX", false) }; for(i = 0; i < RXMAX; i++) { int len, idx, result; if((idx = rrx[i].match(s,0,&len)) > -1) { // if((idx = rrx[i].search(s)) > -1) { // len = rrx[i].matchedLength(); // // rrx[i] has been matched, idx contains the start of the match // and len contains how long the match is. Extract the match. // QString sub = s.mid(idx, len); // // Now extract the digits only from the match, which will // then be converted to an int. // if ((idx = rrx[RXMAX-1].match( sub,0,&len )) > -1) { // if ((idx = rrx[RXMAX-1].search( sub )) > -1) { // len = rrx[RXMAX-1].matchedLength(); sub = sub.mid(idx, len); result = sub.toInt(); if(result > 0) { rx = result; break; } } } } for(i = 0; i < TXMAX; i++) { int len, idx, result; if((idx = trx[i].match(s,0,&len)) > -1) { // if((idx = trx[i].search(s)) > -1) { // len = trx[i].matchedLength(); // // trx[i] has been matched, idx contains the start of the match // and len contains how long the match is. Extract the match. // QString sub = s.mid(idx, len); // // Now extract the digits only from the match, which will then // be converted to an int. // if((idx = rrx[RXMAX-1].match(sub,0,&len)) > -1) { // if((idx = rrx[RXMAX-1].search(sub)) > -1) { // len = rrx[RXMAX-1].matchedLength(); sub = sub.mid(idx, len); result = sub.toInt(); if(result > 0) { tx = result; break; } } } } if(rx == -1 && tx == -1) result = i18n("Unknown speed"); else if(tx == -1) result.setNum(rx); else if(rx == -1) // should not happen result.setNum(tx); else result.sprintf("%d/%d", rx, tx); qDebug( "The parsed result is: %s", result.latin1()); return result; } // Lock modem device. Returns 0 on success 1 if the modem is locked and -1 if // a lock file can't be created ( permission problem ) int Modem::lockdevice() { int fd; char newlock[80]=""; // safe if(!_pppdata->modemLockFile()) { qDebug("The user doesn't want a lockfile."); return 0; } if (modem_is_locked) return 1; QString lockfile = LOCK_DIR"/LCK.."; lockfile += _pppdata->modemDevice().mid(5); // append everything after /dev/ if(access(QFile::encodeName(lockfile), F_OK) == 0) { // if ((fd = Requester::rq-> if ((fd = openLockfile(QFile::encodeName(lockfile), O_RDONLY)) >= 0) { // Mario: it's not necessary to read more than lets say 32 bytes. If // file has more than 32 bytes, skip the rest char oldlock[33]; // safe int sz = read(fd, &oldlock, 32); close (fd); if (sz <= 0) return 1; oldlock[sz] = '\0'; qDebug( "Device is locked by: %s", oldlock); int oldpid; int match = sscanf(oldlock, "%d", &oldpid); // found a pid in lockfile ? if (match < 1 || oldpid <= 0) return 1; // check if process exists if (kill((pid_t)oldpid, 0) == 0 || errno != ESRCH) return 1; qDebug( "lockfile is stale" ); } } fd = openLockfile(_pppdata->modemDevice(),O_WRONLY|O_TRUNC|O_CREAT); if(fd >= 0) { sprintf(newlock,"%010d\n", getpid()); qDebug("Locking Device: %s", newlock); write(fd, newlock, strlen(newlock)); close(fd); modem_is_locked=true; return 0; } return -1; } // UnLock modem device void Modem::unlockdevice() { if (modem_is_locked) { qDebug( "UnLocking Modem Device" ); close(modemfd); modemfd = -1; unlink(lockfile); lockfile[0] = '\0'; modem_is_locked=false; } } int Modem::openLockfile( QString lockfile, int flags) { int fd; int mode; flags = O_RDONLY; if(flags == O_WRONLY|O_TRUNC|O_CREAT) mode = 0644; else mode = 0; lockfile = LOCK_DIR; lockfile += "/LCK.."; lockfile += device.right( device.length() - device.findRev("/") -1 ); qDebug("lockfile >%s<",lockfile.latin1()); // TODO: // struct stat st; // if(stat(lockfile.data(), &st) == -1) { // if(errno == EBADF) // return -1; // } else { // // make sure that this is a regular file // if(!S_ISREG(st.st_mode)) // return -1; // } if ((fd = open(lockfile, flags, mode)) == -1) { qDebug("error opening lockfile!"); lockfile = QString::null; fd = open(DEVNULL, O_RDONLY); } else fchown(fd, 0, 0); return fd; } void alarm_handler(int) { // fprintf(stderr, "alarm_handler(): Received SIGALRM\n"); // jump siglongjmp(jmp_buffer, 1); } const char* Modem::authFile(Auth method, int version) { switch(method|version) { case PAP|Original: return PAP_AUTH_FILE; break; case PAP|New: return PAP_AUTH_FILE".new"; break; case PAP|Old: return PAP_AUTH_FILE".old"; break; case CHAP|Original: return CHAP_AUTH_FILE; break; case CHAP|New: return CHAP_AUTH_FILE".new"; break; case CHAP|Old: return CHAP_AUTH_FILE".old"; break; default: return 0L; } } bool Modem::createAuthFile(Auth method, const char *username, const char *password) { const char *authfile, *oldName, *newName; char line[100]; char regexp[2*MaxStrLen+30]; regex_t preg; if(!(authfile = authFile(method))) return false; if(!(newName = authFile(method, New))) return false; // look for username, "username" or 'username' // if you modify this RE you have to adapt regexp's size above snprintf(regexp, sizeof(regexp), "^[ \t]*%s[ \t]\\|^[ \t]*[\"\']%s[\"\']", username,username); MY_ASSERT(regcomp(&preg, regexp, 0) == 0); // copy to new file pap- or chap-secrets int old_umask = umask(0077); FILE *fout = fopen(newName, "w"); if(fout) { // copy old file FILE *fin = fopen(authfile, "r"); if(fin) { while(fgets(line, sizeof(line), fin)) { if(regexec(&preg, line, 0, 0L, 0) == 0) continue; fputs(line, fout); } fclose(fin); } // append user/pass pair fprintf(fout, "\"%s\"\t*\t\"%s\"\n", username, password); fclose(fout); } // restore umask umask(old_umask); // free memory allocated by regcomp regfree(&preg); if(!(oldName = authFile(method, Old))) return false; // delete old file if any unlink(oldName); rename(authfile, oldName); rename(newName, authfile); return true; } bool Modem::removeAuthFile(Auth method) { const char *authfile, *oldName; if(!(authfile = authFile(method))) return false; if(!(oldName = authFile(method, Old))) return false; if(access(oldName, F_OK) == 0) { unlink(authfile); return (rename(oldName, authfile) == 0); } else return false; } bool Modem::setSecret(int method, const char* name, const char* password) { Auth auth; if(method == AUTH_PAPCHAP) return setSecret(AUTH_PAP, name, password) && setSecret(AUTH_CHAP, name, password); switch(method) { case AUTH_PAP: auth = Modem::PAP; break; case AUTH_CHAP: auth = Modem::CHAP; break; default: return false; } return createAuthFile(auth, name, password); } bool Modem::removeSecret(int method) { Auth auth; switch(method) { case AUTH_PAP: auth = Modem::PAP; break; case AUTH_CHAP: auth = Modem::CHAP; break; default: return false; } return removeAuthFile( auth ); } int checkForInterface() { // I don't know if Linux needs more initialization to get the ioctl to // work, pppd seems to hint it does. But BSD doesn't, and the following // code should compile. #if (defined(HAVE_NET_IF_PPP_H) || defined(HAVE_LINUX_IF_PPP_H)) && !defined(__svr4__) int s, ok; struct ifreq ifr; // extern char *no_ppp_msg; if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) return 1; /* can't tell */ strlcpy(ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name)); ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0; close(s); if (ok == -1) { // This is ifdef'd FreeBSD, because FreeBSD is the only BSD that supports // KLDs, the old LKM interface couldn't handle loading devices // dynamically, and thus can't load ppp support on the fly #ifdef __FreeBSD__ // If we failed to load ppp support and don't have it already. if (kldload("if_ppp") == -1) { return -1; } return 0; #else return -1; #endif } return 0; #else // We attempt to use the SunOS/SysVr4 method and stat /dev/ppp struct stat buf; memset(&buf, 0, sizeof(buf)); return stat("/dev/ppp", &buf); #endif } bool Modem::execpppd(const char *arguments) { char buf[MAX_CMDLEN]; char *args[MaxArgs]; pid_t pgrpid; if(modemfd<0) return false; _pppdExitStatus = -1; switch(pppdPid = fork()) { case -1: fprintf(stderr,"In parent: fork() failed\n"); return false; break; case 0: // let's parse the arguments the user supplied into UNIX suitable form // that is a list of pointers each pointing to exactly one word strlcpy(buf, arguments); parseargs(buf, args); // become a session leader and let /dev/ttySx // be the controlling terminal. pgrpid = setsid(); #ifdef TIOCSCTTY if(ioctl(modemfd, TIOCSCTTY, 0)<0) fprintf(stderr, "ioctl() failed.\n"); #elif defined (TIOCSPGRP) if(ioctl(modemfd, TIOCSPGRP, &pgrpid)<0) fprintf(stderr, "ioctl() failed.\n"); #endif if(tcsetpgrp(modemfd, pgrpid)<0) fprintf(stderr, "tcsetpgrp() failed.\n"); dup2(modemfd, 0); dup2(modemfd, 1); switch (checkForInterface()) { case 1: fprintf(stderr, "Cannot determine if kernel supports ppp.\n"); break; case -1: fprintf(stderr, "Kernel does not support ppp, oops.\n"); break; case 0: fprintf(stderr, "Kernel supports ppp alright.\n"); break; } execve(pppdPath(), args, 0L); _exit(0); break; default: qDebug("In parent: pppd pid %d\n",pppdPid); close(modemfd); modemfd = -1; return true; break; } } bool Modem::killpppd() { if(pppdPid > 0) { qDebug("In killpppd(): Sending SIGTERM to %d\n", pppdPid); if(kill(pppdPid, SIGTERM) < 0) { qDebug("Error terminating %d. Sending SIGKILL\n", pppdPid); if(kill(pppdPid, SIGKILL) < 0) { qDebug("Error killing %d\n", pppdPid); return false; } } } return true; } void Modem::parseargs(char* buf, char** args) { int nargs = 0; int quotes; while(nargs < MaxArgs-1 && *buf != '\0') { quotes = 0; // Strip whitespace. Use nulls, so that the previous argument is // terminated automatically. while ((*buf == ' ' ) || (*buf == '\t' ) || (*buf == '\n' ) ) *buf++ = '\0'; // detect begin of quoted argument if (*buf == '"' || *buf == '\'') { quotes = *buf; *buf++ = '\0'; } // save the argument if(*buf != '\0') { *args++ = buf; nargs++; } if (!quotes) while ((*buf != '\0') && (*buf != '\n') && (*buf != '\t') && (*buf != ' ')) buf++; else { while ((*buf != '\0') && (*buf != quotes)) buf++; *buf++ = '\0'; } } *args = 0L; } bool Modem::execPPPDaemon(const QString & arguments) { - if(execpppd(arguments)==0) { + if(execpppd(arguments)) { _pppdata->setpppdRunning(true); return true; } else return false; } void Modem::killPPPDaemon() { _pppdata->setpppdRunning(false); killpppd(); } int Modem::pppdExitStatus() { return _pppdExitStatus; } int Modem::openResolv(int flags) { int fd; if ((fd = open(_PATH_RESCONF, flags)) == -1) { qDebug("error opening resolv.conf!"); fd = open(DEVNULL, O_RDONLY); } return fd; } bool Modem::setHostname(const QString & name) { return sethostname(name, name.length()) == 0; } |