| -rw-r--r-- | libopie/odevice.cpp | 9 | ||||
| -rw-r--r-- | libopie2/opiecore/device/odevice_ipaq.cpp | 8 |
2 files changed, 15 insertions, 2 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index 35d6cb4..c5a916b 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -565,1545 +565,1552 @@ bool ODevice::setSoftSuspend ( bool /*soft*/ ) bool ODevice::suspend ( ) { qDebug("ODevice::suspend"); if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; struct timeval tvs, tvn; ::gettimeofday ( &tvs, 0 ); ::sync ( ); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); // This is needed because the iPAQ apm implementation is asynchronous and we // can not be sure when exactly the device is really suspended // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists. if ( res ) { do { // wait at most 1.5 sec: either suspend didn't work or the device resumed ::usleep ( 200 * 1000 ); ::gettimeofday ( &tvn, 0 ); } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 ); } return res; } //#include <linux/fb.h> better not rely on kernel headers in userspace ... #define FBIOBLANK OD_IO( 'F', 0x11 ) // 0x4611 /* VESA Blanking Levels */ #define VESA_NO_BLANKING 0 #define VESA_VSYNC_SUSPEND 1 #define VESA_HSYNC_SUSPEND 2 #define VESA_POWERDOWN 3 /** * This sets the display on or off */ bool ODevice::setDisplayStatus ( bool on ) { qDebug("ODevice::setDisplayStatus(%d)", on); if ( d-> m_model == Model_Unknown ) return false; bool res = false; int fd; if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) { res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 ); ::close ( fd ); } return res; } /** * This sets the display brightness * * @param p The brightness to be set on a scale from 0 to 255 * @return success or failure */ bool ODevice::setDisplayBrightness ( int p) { Q_UNUSED( p ) return false; } /** * @return returns the number of steppings on the brightness slider * in the Light-'n-Power settings. */ int ODevice::displayBrightnessResolution ( ) const { return 16; } /** * This sets the display contrast * @param p The contrast to be set on a scale from 0 to 255 * @return success or failure */ bool ODevice::setDisplayContrast ( int p) { Q_UNUSED( p ) return false; } /** * @return return the max value for the brightness settings slider * or 0 if the device doesn't support setting of a contrast */ int ODevice::displayContrastResolution ( ) const { return 0; } /** * This returns the vendor as string * @return Vendor as QString */ QString ODevice::vendorString ( ) const { return d-> m_vendorstr; } /** * This returns the vendor as one of the values of OVendor * @return OVendor */ OVendor ODevice::vendor ( ) const { return d-> m_vendor; } /** * This returns the model as a string * @return A string representing the model */ QString ODevice::modelString ( ) const { return d-> m_modelstr; } /** * This does return the OModel used */ OModel ODevice::model ( ) const { return d-> m_model; } /** * This does return the systen name */ QString ODevice::systemString ( ) const { return d-> m_systemstr; } /** * Return System as OSystem value */ OSystem ODevice::system ( ) const { return d-> m_system; } /** * @return the version string of the base system */ QString ODevice::systemVersionString ( ) const { return d-> m_sysverstr; } /** * @return the current Transformation */ Transformation ODevice::rotation ( ) const { return d-> m_rotation; } /** * @return the current rotation direction */ ODirection ODevice::direction ( ) const { return d-> m_direction; } /** * This plays an alarmSound */ void ODevice::alarmSound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); if ( snd. isFinished ( )) snd. play ( ); #endif } /** * This plays a key sound */ void ODevice::keySound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "keysound" ); if ( snd. isFinished ( )) snd. play ( ); #endif } /** * This plays a touch sound */ void ODevice::touchSound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "touchsound" ); if ( snd. isFinished ( )) snd. play ( ); #endif } /** * This method will return a list of leds * available on this device * @return a list of LEDs. */ QValueList <OLed> ODevice::ledList ( ) const { return QValueList <OLed> ( ); } /** * This does return the state of the LEDs */ QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const { return QValueList <OLedState> ( ); } /** * @return the state for a given OLed */ OLedState ODevice::ledState ( OLed /*which*/ ) const { return Led_Off; } /** * Set the state for a LED * @param which Which OLed to use * @param st The state to set * @return success or failure */ bool ODevice::setLedState ( OLed which, OLedState st ) { Q_UNUSED( which ) Q_UNUSED( st ) return false; } /** * @return if the device has a light sensor */ bool ODevice::hasLightSensor ( ) const { return false; } /** * @return a value from the light sensor */ int ODevice::readLightSensor ( ) { return -1; } /** * @return the light sensor resolution */ int ODevice::lightSensorResolution ( ) const { return 0; } /** * @return if the device has a hinge sensor */ bool ODevice::hasHingeSensor ( ) const { return false; } /** * @return a value from the hinge sensor */ OHingeStatus ODevice::readHingeSensor ( ) { return CASE_UNKNOWN; } /** * @return a list with CPU frequencies supported by the hardware */ const QStrList &ODevice::allowedCpuFrequencies ( ) const { return *d->m_cpu_frequencies; } /** * Set desired CPU frequency * * @param index index into d->m_cpu_frequencies of the frequency to be set */ bool ODevice::setCurrentCpuFrequency(uint index) { if (index >= d->m_cpu_frequencies->count()) return false; char *freq = d->m_cpu_frequencies->at(index); qWarning("set freq to %s", freq); int fd; if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) { char writeCommand[50]; const int count = sprintf(writeCommand, "%s\n", freq); int res = (::write(fd, writeCommand, count) != -1); ::close(fd); return res; } return false; } /** * @return a list of hardware buttons */ const QValueList <ODeviceButton> &ODevice::buttons ( ) { initButtons ( ); return *d-> m_buttons; } /** * @return The amount of time that would count as a hold */ uint ODevice::buttonHoldTime ( ) const { return d-> m_holdtime; } /** * This method return a ODeviceButton for a key code * or 0 if no special hardware button is available for the device * * @return The devicebutton or 0l * @see ODeviceButton */ const ODeviceButton *ODevice::buttonForKeycode ( ushort code ) { initButtons ( ); for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) { if ( (*it). keycode ( ) == code ) return &(*it); } return 0; } void ODevice::reloadButtonMapping ( ) { initButtons ( ); Config cfg ( "ButtonSettings" ); for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) { ODeviceButton &b = ( *d-> m_buttons ) [i]; QString group = "Button" + QString::number ( i ); QCString pch, hch; QCString pm, hm; QByteArray pdata, hdata; if ( cfg. hasGroup ( group )) { cfg. setGroup ( group ); pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( ); pm = cfg. readEntry ( "PressedActionMessage" ). latin1 ( ); // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" )); hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( ); hm = cfg. readEntry ( "HeldActionMessage" ). latin1 ( ); // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" )); } b. setPressedAction ( OQCopMessage ( pch, pm, pdata )); b. setHeldAction ( OQCopMessage ( hch, hm, hdata )); } } void ODevice::remapPressedAction ( int button, const OQCopMessage &action ) { initButtons ( ); QString mb_chan; if ( button >= (int) d-> m_buttons-> count ( )) return; ODeviceButton &b = ( *d-> m_buttons ) [button]; b. setPressedAction ( action ); mb_chan=b. pressedAction ( ). channel ( ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan); buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( )); // buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( ))); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::remapHeldAction ( int button, const OQCopMessage &action ) { initButtons ( ); if ( button >= (int) d-> m_buttons-> count ( )) return; ODeviceButton &b = ( *d-> m_buttons ) [button]; b. setHeldAction ( action ); Config buttonFile ( "ButtonSettings" ); buttonFile. setGroup ( "Button" + QString::number ( button )); buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( )); buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( )); // buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( ))); QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" ); } void ODevice::virtual_hook(int, void* ){ } /************************************************** * * Yopy 3500/3700 * **************************************************/ bool Yopy::isYopy ( ) { QFile f( "/proc/cpuinfo" ); if ( f. open ( IO_ReadOnly ) ) { QTextStream ts ( &f ); QString line; while( line = ts. readLine ( ) ) { if ( line. left ( 8 ) == "Hardware" ) { int loc = line. find ( ":" ); if ( loc != -1 ) { QString model = line. mid ( loc + 2 ). simplifyWhiteSpace( ); return ( model == "Yopy" ); } } } } return false; } void Yopy::init ( ) { d-> m_vendorstr = "G.Mate"; d-> m_vendor = Vendor_GMate; d-> m_modelstr = "Yopy3700"; d-> m_model = Model_Yopy_3700; d-> m_rotation = Rot0; d-> m_systemstr = "Linupy"; d-> m_system = System_Linupy; QFile f ( "/etc/issue" ); if ( f. open ( IO_ReadOnly )) { QTextStream ts ( &f ); ts.readLine(); d-> m_sysverstr = ts. readLine ( ); f. close ( ); } } void Yopy::initButtons ( ) { if ( d-> m_buttons ) return; d-> m_buttons = new QValueList <ODeviceButton>; for (uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof(yopy_button)); i++) { yopy_button *ib = yopy_buttons + i; ODeviceButton b; b. setKeycode ( ib-> code ); b. setUserText ( QObject::tr ( "Button", ib-> utext )); b. setPixmap ( Resource::loadPixmap ( ib-> pix )); b. setFactoryPresetPressedAction (OQCopMessage(makeChannel(ib->fpressedservice), ib->fpressedaction)); b. setFactoryPresetHeldAction (OQCopMessage(makeChannel(ib->fheldservice), ib->fheldaction)); d-> m_buttons-> append ( b ); } reloadButtonMapping ( ); QCopChannel *sysch = new QCopChannel("QPE/System", this); connect(sysch, SIGNAL(received(const QCString &, const QByteArray & )), this, SLOT(systemMessage(const QCString &, const QByteArray & ))); } bool Yopy::suspend() { /* Opie for Yopy does not implement its own power management at the moment. The public version runs parallel to X, and relies on the existing power management features. */ return false; } bool Yopy::setDisplayBrightness(int bright) { /* The code here works, but is disabled as the current version runs parallel to X, and relies on the existing backlight demon. */ #if 0 if ( QFile::exists("/proc/sys/pm/light") ) { int fd = ::open("/proc/sys/pm/light", O_WRONLY); if (fd >= 0 ) { if (bright) ::write(fd, "1\n", 2); else ::write(fd, "0\n", 2); ::close(fd); return true; } } #endif return false; } int Yopy::displayBrightnessResolution() const { return 2; } /************************************************** * * iPAQ * **************************************************/ void iPAQ::init ( ) { d-> m_vendorstr = "HP"; d-> m_vendor = Vendor_HP; QFile f ( "/proc/hal/model" ); if ( f. open ( IO_ReadOnly )) { QTextStream ts ( &f ); d-> m_modelstr = "H" + ts. readLine ( ); if ( d-> m_modelstr == "H3100" ) d-> m_model = Model_iPAQ_H31xx; else if ( d-> m_modelstr == "H3600" ) d-> m_model = Model_iPAQ_H36xx; else if ( d-> m_modelstr == "H3700" ) d-> m_model = Model_iPAQ_H37xx; else if ( d-> m_modelstr == "H3800" ) d-> m_model = Model_iPAQ_H38xx; else if ( d-> m_modelstr == "H3900" ) d-> m_model = Model_iPAQ_H39xx; else if ( d-> m_modelstr == "H5400" ) d-> m_model = Model_iPAQ_H5xxx; else d-> m_model = Model_Unknown; f. close ( ); } switch ( d-> m_model ) { case Model_iPAQ_H31xx: case Model_iPAQ_H38xx: d-> m_rotation = Rot90; break; case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: case Model_iPAQ_H39xx: default: d-> m_rotation = Rot270; break; case Model_iPAQ_H5xxx: d-> m_rotation = Rot0; } f. setName ( "/etc/familiar-version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "Familiar"; d-> m_system = System_Familiar; QTextStream ts ( &f ); d-> m_sysverstr = ts. readLine ( ). mid ( 10 ); f. close ( ); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "OpenEmbedded/iPaq"; d-> m_system = System_Familiar; QTextStream ts ( &f ); ts.setDevice ( &f ); d-> m_sysverstr = ts. readLine ( ); f. close ( ); } } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void iPAQ::initButtons ( ) { if ( d-> m_buttons ) return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d-> m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) { i_button *ib = ipaq_buttons + i; ODeviceButton b; if (( ib-> model & d-> m_model ) == d-> m_model ) { b. setKeycode ( ib-> code ); b. setUserText ( QObject::tr ( "Button", ib-> utext )); b. setPixmap ( Resource::loadPixmap ( ib-> pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction )); d-> m_buttons-> append ( b ); } } reloadButtonMapping ( ); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); } //#include <linux/h3600_ts.h> // including kernel headers is evil ... typedef struct { unsigned char OffOnBlink; /* 0=off 1=on 2=Blink */ unsigned char TotalTime; /* Units of 5 seconds */ unsigned char OnTime; /* units of 100m/s */ unsigned char OffTime; /* units of 100m/s */ } LED_IN; typedef struct { unsigned char mode; unsigned char pwr; unsigned char brightness; } FLITE_IN; #define LED_ON OD_IOW( 'f', 5, LED_IN ) #define FLITE_ON OD_IOW( 'f', 7, FLITE_IN ) QValueList <OLed> iPAQ::ledList ( ) const { QValueList <OLed> vl; vl << Led_Power; if ( d-> m_model == Model_iPAQ_H38xx ) vl << Led_BlueTooth; return vl; } QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast; else if ( l == Led_BlueTooth && d-> m_model == Model_iPAQ_H38xx ) vl << Led_Off; // << Led_On << ??? return vl; } OLedState iPAQ::ledState ( OLed l ) const { switch ( l ) { case Led_Power: return m_leds [0]; case Led_BlueTooth: return m_leds [1]; default: return Led_Off; } } bool iPAQ::setLedState ( OLed l, OLedState st ) { static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK ); if ( l == Led_Power ) { if ( fd >= 0 ) { LED_IN leds; ::memset ( &leds, 0, sizeof( leds )); leds. TotalTime = 0; leds. OnTime = 0; leds. OffTime = 1; leds. OffOnBlink = 2; switch ( st ) { case Led_Off : leds. OffOnBlink = 0; break; case Led_On : leds. OffOnBlink = 1; break; case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break; case Led_BlinkFast: leds. OnTime = 5; leds. OffTime = 5; break; } if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) { m_leds [0] = st; return true; } } } return false; } bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat ) { int newkeycode = keycode; switch ( keycode ) { // H38xx/H39xx have no "Q" key anymore - this is now the Mail key case HardKey_Menu: { if (( d-> m_model == Model_iPAQ_H38xx ) || ( d-> m_model == Model_iPAQ_H39xx ) || ( d-> m_model == Model_iPAQ_H5xxx)) { newkeycode = HardKey_Mail; } break; } - // Rotate cursor keys 180° + // Rotate cursor keys 180° or 270° case Key_Left : case Key_Right: case Key_Up : case Key_Down : { + if (( d-> m_model == Model_iPAQ_H31xx ) || ( d-> m_model == Model_iPAQ_H38xx )) { newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4; } + // Rotate the cursor keys by 270° + // keycode - Key_Left = position of the button starting from left clockwise + // add the rotation to it and modolo. No we've the original offset + // add the offset to the Key_Left key + if ( d-> m_model == Model_iPAQ_H5xxx ) + newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4; break; } // map Power Button short/long press to F34/F35 case Key_SysReq: { if ( isPress ) { if ( m_power_timer ) killTimer ( m_power_timer ); m_power_timer = startTimer ( 500 ); } else if ( m_power_timer ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false ); } newkeycode = Key_unknown; break; } } if ( newkeycode != keycode ) { if ( newkeycode != Key_unknown ) QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat ); return true; } else return false; } void iPAQ::timerEvent ( QTimerEvent * ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false ); } void iPAQ::alarmSound ( ) { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); int fd; int vol; bool vol_reset = false; if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) { if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) { Config cfg ( "qpe" ); cfg. setGroup ( "Volume" ); int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 ); if ( volalarm < 0 ) volalarm = 0; else if ( volalarm > 100 ) volalarm = 100; volalarm |= ( volalarm << 8 ); if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 ) vol_reset = true; } } snd. play ( ); while ( !snd. isFinished ( )) qApp-> processEvents ( ); if ( fd >= 0 ) { if ( vol_reset ) ::ioctl ( fd, MIXER_WRITE( 0 ), &vol ); ::close ( fd ); } #endif } bool iPAQ::setSoftSuspend ( bool soft ) { bool res = false; int fd; if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) { if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 ) res = true; else ::perror ( "write to /proc/sys/ts/suspend_button_mode" ); ::close ( fd ); } else ::perror ( "/proc/sys/ts/suspend_button_mode" ); return res; } bool iPAQ::setDisplayBrightness ( int bright ) { bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) { FLITE_IN bl; bl. mode = 1; bl. pwr = bright ? 1 : 0; bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255; res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 ); ::close ( fd ); } return res; } int iPAQ::displayBrightnessResolution ( ) const { switch ( model ( )) { case Model_iPAQ_H31xx: case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: return 128; // really 256, but >128 could damage the LCD case Model_iPAQ_H38xx: case Model_iPAQ_H39xx: return 64; case Model_iPAQ_H5xxx: return 255; default: return 2; } } bool iPAQ::hasLightSensor ( ) const { return true; } int iPAQ::readLightSensor ( ) { int fd; int val = -1; if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) { char buffer [8]; if ( ::read ( fd, buffer, 5 ) == 5 ) { char *endptr; buffer [4] = 0; val = ::strtol ( buffer + 2, &endptr, 16 ); if ( *endptr != 0 ) val = -1; } ::close ( fd ); } return val; } int iPAQ::lightSensorResolution ( ) const { return 256; } /************************************************** * * Zaurus * **************************************************/ // Check whether this device is the sharp zaurus.. // FIXME This gets unnecessary complicated. We should think about splitting the Zaurus // class up into individual classes. We need three classes // // Zaurus-Collie (SA-model w/ 320x240 lcd, for SL5500 and SL5000) // Zaurus-Poodle (PXA-model w/ 320x240 lcd, for SL5600) // Zaurus-Corgi (PXA-model w/ 640x480 lcd, for C700, C750, C760, and C860) // // Only question right now is: Do we really need to do it? Because as soon // as the OpenZaurus kernel is ready, there will be a unified interface for all // Zaurus models (concerning apm, backlight, buttons, etc.) // // Comments? - mickeyl. bool Zaurus::isZaurus() { // If the special devices by embedix exist, it is quite simple: it is a Zaurus ! if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){ return true; } // On non-embedix kernels, we have to look closer. bool is_zaurus = false; QFile f ( "/proc/cpuinfo" ); if ( f. open ( IO_ReadOnly ) ) { QString model; QFile f ( "/proc/cpuinfo" ); QTextStream ts ( &f ); QString line; while( line = ts. readLine ( ) ) { if ( line. left ( 8 ) == "Hardware" ) break; } int loc = line. find ( ":" ); if ( loc != -1 ) model = line. mid ( loc + 2 ). simplifyWhiteSpace( ); if ( model == "Sharp-Collie" || model == "Collie" || model == "SHARP Corgi" || model == "SHARP Shepherd" || model == "SHARP Poodle" || model == "SHARP Husky" ) is_zaurus = true; } return is_zaurus; } void Zaurus::init ( ) { d-> m_vendorstr = "Sharp"; d-> m_vendor = Vendor_Sharp; m_embedix = true; // Not openzaurus means: It has an embedix kernel ! // QFile f ( "/proc/filesystems" ); QString model; // It isn't a good idea to check the system configuration to // detect the distribution ! // Otherwise it may happen that any other distribution is detected as openzaurus, just // because it uses a jffs2 filesystem.. // (eilers) // if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) { QFile f ("/etc/oz_version"); if ( f.exists() ){ d-> m_vendorstr = "OpenZaurus Team"; d-> m_systemstr = "OpenZaurus"; d-> m_system = System_OpenZaurus; if ( f. open ( IO_ReadOnly )) { QTextStream ts ( &f ); d-> m_sysverstr = ts. readLine ( );//. mid ( 10 ); f. close ( ); } // Openzaurus sometimes uses the embedix kernel! // => Check whether this is an embedix kernel FILE *uname = popen("uname -r", "r"); QString line; if ( f.open(IO_ReadOnly, uname) ) { QTextStream ts ( &f ); line = ts. readLine ( ); int loc = line. find ( "embedix" ); if ( loc != -1 ) m_embedix = true; else m_embedix = false; f. close ( ); } pclose(uname); } else { d-> m_systemstr = "Zaurus"; d-> m_system = System_Zaurus; } f. setName ( "/proc/cpuinfo" ); if ( f. open ( IO_ReadOnly ) ) { QTextStream ts ( &f ); QString line; while( line = ts. readLine ( ) ) { if ( line. left ( 8 ) == "Hardware" ) break; } int loc = line. find ( ":" ); if ( loc != -1 ) model = line. mid ( loc + 2 ). simplifyWhiteSpace( ); } if ( model == "SHARP Corgi" ) { d-> m_model = Model_Zaurus_SLC7x0; d-> m_modelstr = "Zaurus SL-C700"; } else if ( model == "SHARP Shepherd" ) { d-> m_model = Model_Zaurus_SLC7x0; d-> m_modelstr = "Zaurus SL-C750"; } else if ( model == "SHARP Husky" ) { d-> m_model = Model_Zaurus_SLC7x0; d-> m_modelstr = "Zaurus SL-C760"; } else if ( model == "SHARP Poodle" ) { d-> m_model = Model_Zaurus_SLB600; d-> m_modelstr = "Zaurus SL-B500 or SL-5600"; } else if ( model == "Sharp-Collie" || model == "Collie" ) { d-> m_model = Model_Zaurus_SL5500; d-> m_modelstr = "Zaurus SL-5500 or SL-5000d"; } else { d-> m_model = Model_Zaurus_SL5500; d-> m_modelstr = "Zaurus (Model unknown)"; } bool flipstate = false; switch ( d-> m_model ) { case Model_Zaurus_SLA300: d-> m_rotation = Rot0; break; case Model_Zaurus_SLC7x0: d-> m_rotation = rotation(); d-> m_direction = direction(); break; case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: d-> m_rotation = Rot270; break; } m_leds [0] = Led_Off; } void Zaurus::initButtons ( ) { if ( d-> m_buttons ) return; d-> m_buttons = new QValueList <ODeviceButton>; struct z_button * pz_buttons; int buttoncount; switch ( d-> m_model ) { case Model_Zaurus_SLC7x0: pz_buttons = z_buttons_c700; buttoncount = ARRAY_SIZE(z_buttons_c700); break; default: pz_buttons = z_buttons; buttoncount = ARRAY_SIZE(z_buttons); break; } for ( int i = 0; i < buttoncount; i++ ) { struct z_button *zb = pz_buttons + i; ODeviceButton b; b. setKeycode ( zb-> code ); b. setUserText ( QObject::tr ( "Button", zb-> utext )); b. setPixmap ( Resource::loadPixmap ( zb-> pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction )); d-> m_buttons-> append ( b ); } reloadButtonMapping ( ); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); } #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> //#include <asm/sharp_char.h> // including kernel headers is evil ... #define SHARP_DEV_IOCTL_COMMAND_START 0x5680 #define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ #define SHARP_BUZ_KEYSOUND 2 /* key sound */ #define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ /* --- for SHARP_BUZZER device --- */ //#define SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) //#define SHARP_BUZZER_MAKESOUND (SHARP_BUZZER_IOCTL_START) #define SHARP_BUZZER_SETVOLUME (SHARP_BUZZER_IOCTL_START+1) #define SHARP_BUZZER_GETVOLUME (SHARP_BUZZER_IOCTL_START+2) #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3) #define SHARP_BUZZER_SETMUTE (SHARP_BUZZER_IOCTL_START+4) #define SHARP_BUZZER_STOPSOUND (SHARP_BUZZER_IOCTL_START+5) //#define SHARP_BUZ_TOUCHSOUND 1 /* touch panel sound */ //#define SHARP_BUZ_KEYSOUND 2 /* key sound */ //#define SHARP_PDA_ILLCLICKSOUND 3 /* illegal click */ //#define SHARP_PDA_WARNSOUND 4 /* warning occurred */ //#define SHARP_PDA_ERRORSOUND 5 /* error occurred */ //#define SHARP_PDA_CRITICALSOUND 6 /* critical error occurred */ //#define SHARP_PDA_SYSSTARTSOUND 7 /* system start */ //#define SHARP_PDA_SYSTEMENDSOUND 8 /* system shutdown */ //#define SHARP_PDA_APPSTART 9 /* application start */ //#define SHARP_PDA_APPQUIT 10 /* application ends */ //#define SHARP_BUZ_SCHEDULE_ALARM 11 /* schedule alarm */ //#define SHARP_BUZ_DAILY_ALARM 12 /* daily alarm */ //#define SHARP_BUZ_GOT_PHONE_CALL 13 /* phone call sound */ //#define SHARP_BUZ_GOT_MAIL 14 /* mail sound */ // #define SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START) #define SHARP_LED_SETSTATUS (SHARP_LED_IOCTL_START+1) #define SHARP_IOCTL_GET_ROTATION 0x413c typedef struct sharp_led_status { int which; /* select which LED status is wanted. */ int status; /* set new led status if you call SHARP_LED_SETSTATUS */ } sharp_led_status; #define SHARP_LED_MAIL_EXISTS 9 /* mail status (exists or not) */ #define LED_MAIL_NO_UNREAD_MAIL 0 /* for SHARP_LED_MAIL_EXISTS */ #define LED_MAIL_NEWMAIL_EXISTS 1 /* for SHARP_LED_MAIL_EXISTS */ #define LED_MAIL_UNREAD_MAIL_EX 2 /* for SHARP_LED_MAIL_EXISTS */ // #include <asm/sharp_apm.h> // including kernel headers is evil ... #define APM_IOCGEVTSRC OD_IOR( 'A', 203, int ) #define APM_IOCSEVTSRC OD_IORW( 'A', 204, int ) #define APM_EVT_POWER_BUTTON (1 << 0) #define FL_IOCTL_STEP_CONTRAST 100 void Zaurus::buzzer ( int sound ) { #ifndef QT_NO_SOUND QString soundname; // Not all devices have real sound if ( d->m_model == Model_Zaurus_SLC7x0 || d->m_model == Model_Zaurus_SLB600 ){ switch ( sound ){ case SHARP_BUZ_SCHEDULE_ALARM: soundname = "alarm"; break; case SHARP_BUZ_TOUCHSOUND: soundname = "touchsound"; break; case SHARP_BUZ_KEYSOUND: soundname = "keysound"; break; default: soundname = "alarm"; } } // If a soundname is defined, we expect that this device has // sound capabilities.. Otherwise we expect to have the buzzer // device.. if ( !soundname.isEmpty() ){ int fd; int vol; bool vol_reset = false; Sound snd ( soundname ); if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) { if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) { Config cfg ( "qpe" ); cfg. setGroup ( "Volume" ); int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 ); if ( volalarm < 0 ) volalarm = 0; else if ( volalarm > 100 ) volalarm = 100; volalarm |= ( volalarm << 8 ); if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 ) vol_reset = true; } } snd. play ( ); while ( !snd. isFinished ( )) qApp-> processEvents ( ); if ( fd >= 0 ) { if ( vol_reset ) ::ioctl ( fd, MIXER_WRITE( 0 ), &vol ); ::close ( fd ); } } else { int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK ); if ( fd >= 0 ) { ::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound ); ::close ( fd ); } } #endif } void Zaurus::alarmSound ( ) { buzzer ( SHARP_BUZ_SCHEDULE_ALARM ); } void Zaurus::touchSound ( ) { buzzer ( SHARP_BUZ_TOUCHSOUND ); } void Zaurus::keySound ( ) { buzzer ( SHARP_BUZ_KEYSOUND ); } QValueList <OLed> Zaurus::ledList ( ) const { QValueList <OLed> vl; vl << Led_Mail; return vl; } QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Mail ) vl << Led_Off << Led_On << Led_BlinkSlow; return vl; } OLedState Zaurus::ledState ( OLed which ) const { if ( which == Led_Mail ) return m_leds [0]; else return Led_Off; } bool Zaurus::setLedState ( OLed which, OLedState st ) { if (!m_embedix) // Currently not supported on non_embedix kernels return false; static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK ); if ( which == Led_Mail ) { if ( fd >= 0 ) { struct sharp_led_status leds; ::memset ( &leds, 0, sizeof( leds )); leds. which = SHARP_LED_MAIL_EXISTS; bool ok = true; switch ( st ) { case Led_Off : leds. status = LED_MAIL_NO_UNREAD_MAIL; break; case Led_On : leds. status = LED_MAIL_NEWMAIL_EXISTS; break; case Led_BlinkSlow: leds. status = LED_MAIL_UNREAD_MAIL_EX; break; default : ok = false; } if ( ok && ( ::ioctl ( fd, SHARP_LED_SETSTATUS, &leds ) >= 0 )) { m_leds [0] = st; return true; } } } return false; } bool Zaurus::setSoftSuspend ( bool soft ) { if (!m_embedix) { /* non-Embedix kernels dont have kernel autosuspend */ return ODevice::setSoftSuspend( soft ); } bool res = false; int fd; if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) || (( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) { int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources if ( sources >= 0 ) { if ( soft ) sources &= ~APM_EVT_POWER_BUTTON; else sources |= APM_EVT_POWER_BUTTON; if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources res = true; else perror ( "APM_IOCGEVTSRC" ); } else perror ( "APM_IOCGEVTSRC" ); ::close ( fd ); } else perror ( "/dev/apm_bios or /dev/misc/apm_bios" ); return res; } bool Zaurus::setDisplayBrightness ( int bright ) { //qDebug( "Zaurus::setDisplayBrightness( %d )", bright ); bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; if ( m_embedix ) { if ( d->m_model == Model_Zaurus_SLC7x0 ) { //qDebug( "using special treatment for devices with the corgi backlight interface" ); // special treatment for devices with the corgi backlight interface if (( fd = ::open ( "/proc/driver/fl/corgi-bl", O_WRONLY )) >= 0 ) { int value = ( bright == 1 ) ? 1 : bright * ( 17.0 / 255.0 ); char writeCommand[100]; const int count = sprintf( writeCommand, "0x%x\n", value ); res = ( ::write ( fd, writeCommand, count ) != -1 ); ::close ( fd ); } return res; } else { // standard treatment for devices with the dumb embedix frontlight interface if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) { int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus if ( bright && !bl ) bl = 1; res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 ); ::close ( fd ); } } } else { // special treatment for the OpenZaurus unified interface #define FB_BACKLIGHT_SET_BRIGHTNESS _IOW('F', 1, u_int) /* set brightness */ if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) { res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 ); ::close ( fd ); } } return res; } bool Zaurus::suspend ( ) { qDebug("ODevice::suspend"); if ( !isQWS( ) ) // only qwsserver is allowed to suspend return false; if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices return false; bool res = false; struct timeval tvs, tvn; ::gettimeofday ( &tvs, 0 ); ::sync ( ); // flush fs caches res = ( ::system ( "apm --suspend" ) == 0 ); // This is needed because the iPAQ apm implementation is asynchronous and we // can not be sure when exactly the device is really suspended // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists. if ( res ) { do { // Yes, wait 15 seconds. This APM bug sucks big time. ::usleep ( 200 * 1000 ); ::gettimeofday ( &tvn, 0 ); } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 15000 ); } QCopEnvelope ( "QPE/Rotation", "rotateDefault()" ); return res; } Transformation Zaurus::rotation ( ) const { Transformation rot; int handle = 0; int retval = 0; switch ( d-> m_model ) { case Model_Zaurus_SLC7x0: handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK); if (handle == -1) { return Rot270; } else { retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION); ::close (handle); if (retval == 2 ) rot = Rot0; else rot = Rot270; } break; case Model_Zaurus_SLA300: case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: rot = d-> m_rotation; break; } return rot; } ODirection Zaurus::direction ( ) const { ODirection dir; int handle = 0; int retval = 0; switch ( d-> m_model ) { case Model_Zaurus_SLC7x0: handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK); if (handle == -1) { dir = CW; } else { retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION); ::close (handle); if (retval == 2 ) dir = CCW; else dir = CW; } break; case Model_Zaurus_SLA300: case Model_Zaurus_SLB600: case Model_Zaurus_SL5500: case Model_Zaurus_SL5000: default: dir = d-> m_direction; break; } return dir; } diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp index d20ea4d..cc4b01a 100644 --- a/libopie2/opiecore/device/odevice_ipaq.cpp +++ b/libopie2/opiecore/device/odevice_ipaq.cpp @@ -1,475 +1,481 @@ /* This file is part of the Opie Project Copyright (C) The Opie Team <opie-devel@handhelds.org> =. .=l. .>+-= _;:, .> :=|. This program is free software; you can .> <`_, > . <= redistribute it and/or modify it under :`=1 )Y*s>-.-- : the terms of the GNU Library General Public .="- .-=="i, .._ License as published by the Free Software - . .-<_> .<> Foundation; either version 2 of the License, ._= =} : or (at your option) any later version. .%`+i> _;_. .i_,=:_. -<s. This program is distributed in the hope that + . -:. = it will be useful, but WITHOUT ANY WARRANTY; : .. .:, . . . without even the implied warranty of =_ + =;=|` MERCHANTABILITY or FITNESS FOR A _.=:. : :=>`: PARTICULAR PURPOSE. See the GNU ..}^=.= = ; Library General Public License for more ++= -. .` .: details. : = ...= . :.=- -. .:....=;==+<; You should have received a copy of the GNU -_. . . )=. = Library General Public License along with -- :-=` this library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "odevice_ipaq.h" /* QT */ #include <qapplication.h> #include <qfile.h> #include <qtextstream.h> #include <qwindowsystem_qws.h> /* OPIE */ #include <qpe/config.h> #include <qpe/resource.h> #include <qpe/sound.h> #include <qpe/qcopenvelope_qws.h> /* STD */ #include <fcntl.h> #include <math.h> #include <stdlib.h> #include <signal.h> #include <sys/ioctl.h> #include <sys/time.h> #include <unistd.h> #ifndef QT_NO_SOUND #include <linux/soundcard.h> #endif /* KERNEL */ #define OD_IOC(dir,type,number,size) (( dir << 30 ) | ( type << 8 ) | ( number ) | ( size << 16 )) #define OD_IO(type,number) OD_IOC(0,type,number,0) #define OD_IOW(type,number,size) OD_IOC(1,type,number,sizeof(size)) #define OD_IOR(type,number,size) OD_IOC(2,type,number,sizeof(size)) #define OD_IORW(type,number,size) OD_IOC(3,type,number,sizeof(size)) typedef struct { unsigned char OffOnBlink; /* 0=off 1=on 2=Blink */ unsigned char TotalTime; /* Units of 5 seconds */ unsigned char OnTime; /* units of 100m/s */ unsigned char OffTime; /* units of 100m/s */ } LED_IN; typedef struct { unsigned char mode; unsigned char pwr; unsigned char brightness; } FLITE_IN; #define LED_ON OD_IOW( 'f', 5, LED_IN ) #define FLITE_ON OD_IOW( 'f', 7, FLITE_IN ) struct i_button ipaq_buttons [] = { { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx, Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"), "devicebuttons/ipaq_calendar", "datebook", "nextView()", "today", "raise()" }, { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx, Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"), "devicebuttons/ipaq_contact", "addressbook", "raise()", "addressbook", "beamBusinessCard()" }, { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx, Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"), "devicebuttons/ipaq_menu", "QPE/TaskBar", "toggleMenu()", "QPE/TaskBar", "toggleStartMenu()" }, { Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx, Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"), "devicebuttons/ipaq_mail", "mail", "raise()", "mail", "newMail()" }, { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx, Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"), "devicebuttons/ipaq_home", "QPE/Launcher", "home()", "buttonsettings", "raise()" }, { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx | Model_iPAQ_H5xxx, Qt::Key_F24, QT_TRANSLATE_NOOP("Button", "Record Button"), "devicebuttons/ipaq_record", "QPE/VMemo", "toggleRecord()", "sound", "raise()" }, }; void iPAQ::init() { d->m_vendorstr = "HP"; d->m_vendor = Vendor_HP; QFile f ( "/proc/hal/model" ); if ( f. open ( IO_ReadOnly )) { QTextStream ts ( &f ); d->m_modelstr = "H" + ts. readLine(); if ( d->m_modelstr == "H3100" ) d->m_model = Model_iPAQ_H31xx; else if ( d->m_modelstr == "H3600" ) d->m_model = Model_iPAQ_H36xx; else if ( d->m_modelstr == "H3700" ) d->m_model = Model_iPAQ_H37xx; else if ( d->m_modelstr == "H3800" ) d->m_model = Model_iPAQ_H38xx; else if ( d->m_modelstr == "H3900" ) d->m_model = Model_iPAQ_H39xx; else if ( d->m_modelstr == "H5400" ) d->m_model = Model_iPAQ_H5xxx; else d->m_model = Model_Unknown; f. close(); } switch ( d->m_model ) { case Model_iPAQ_H31xx: case Model_iPAQ_H38xx: d->m_rotation = Rot90; break; case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: case Model_iPAQ_H39xx: default: d->m_rotation = Rot270; break; case Model_iPAQ_H5xxx: d->m_rotation = Rot0; } f. setName ( "/etc/familiar-version" ); if ( f. open ( IO_ReadOnly )) { d->m_systemstr = "Familiar"; d->m_system = System_Familiar; QTextStream ts ( &f ); d->m_sysverstr = ts. readLine(). mid ( 10 ); f. close(); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { d->m_systemstr = "OpenEmbedded/iPaq"; d->m_system = System_Familiar; QTextStream ts ( &f ); ts.setDevice ( &f ); d->m_sysverstr = ts. readLine(); f. close(); } } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void iPAQ::initButtons() { if ( d->m_buttons ) return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d->m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) { i_button *ib = ipaq_buttons + i; ODeviceButton b; if (( ib->model & d->m_model ) == d->m_model ) { b. setKeycode ( ib->code ); b. setUserText ( QObject::tr ( "Button", ib->utext )); b. setPixmap ( Resource::loadPixmap ( ib->pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction )); d->m_buttons->append ( b ); } } reloadButtonMapping(); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); } QValueList <OLed> iPAQ::ledList() const { QValueList <OLed> vl; vl << Led_Power; if ( d->m_model == Model_iPAQ_H38xx ) vl << Led_BlueTooth; return vl; } QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const { QValueList <OLedState> vl; if ( l == Led_Power ) vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast; else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx ) vl << Led_Off; // << Led_On << ??? return vl; } OLedState iPAQ::ledState ( OLed l ) const { switch ( l ) { case Led_Power: return m_leds [0]; case Led_BlueTooth: return m_leds [1]; default: return Led_Off; } } bool iPAQ::setLedState ( OLed l, OLedState st ) { static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK ); if ( l == Led_Power ) { if ( fd >= 0 ) { LED_IN leds; ::memset ( &leds, 0, sizeof( leds )); leds. TotalTime = 0; leds. OnTime = 0; leds. OffTime = 1; leds. OffOnBlink = 2; switch ( st ) { case Led_Off : leds. OffOnBlink = 0; break; case Led_On : leds. OffOnBlink = 1; break; case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break; case Led_BlinkFast: leds. OnTime = 5; leds. OffTime = 5; break; } if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) { m_leds [0] = st; return true; } } } return false; } bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat ) { int newkeycode = keycode; switch ( keycode ) { // H38xx/H39xx have no "Q" key anymore - this is now the Mail key case HardKey_Menu: { if (( d->m_model == Model_iPAQ_H38xx ) || ( d->m_model == Model_iPAQ_H39xx ) || ( d->m_model == Model_iPAQ_H5xxx)) { newkeycode = HardKey_Mail; } break; } - // Rotate cursor keys 180° + // Rotate cursor keys 180° or 270° case Key_Left : case Key_Right: case Key_Up : case Key_Down : { if (( d->m_model == Model_iPAQ_H31xx ) || ( d->m_model == Model_iPAQ_H38xx )) { newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4; } + // Rotate the cursor keys by 270° + // keycode - Key_Left = position of the button starting from left clockwise + // add the rotation to it and modolo. No we've the original offset + // add the offset to the Key_Left key + if ( d-> m_model == Model_iPAQ_H5xxx ) + newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4; break; } // map Power Button short/long press to F34/F35 case Key_SysReq: { if ( isPress ) { if ( m_power_timer ) killTimer ( m_power_timer ); m_power_timer = startTimer ( 500 ); } else if ( m_power_timer ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false ); } newkeycode = Key_unknown; break; } } if ( newkeycode != keycode ) { if ( newkeycode != Key_unknown ) QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat ); return true; } else return false; } void iPAQ::timerEvent ( QTimerEvent * ) { killTimer ( m_power_timer ); m_power_timer = 0; QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false ); QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false ); } void iPAQ::playAlarmSound() { #ifndef QT_NO_SOUND static Sound snd ( "alarm" ); int fd; int vol; bool vol_reset = false; if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) { if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) { Config cfg ( "qpe" ); cfg. setGroup ( "Volume" ); int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 ); if ( volalarm < 0 ) volalarm = 0; else if ( volalarm > 100 ) volalarm = 100; volalarm |= ( volalarm << 8 ); if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 ) vol_reset = true; } } snd. play(); while ( !snd. isFinished()) qApp->processEvents(); if ( fd >= 0 ) { if ( vol_reset ) ::ioctl ( fd, MIXER_WRITE( 0 ), &vol ); ::close ( fd ); } #endif } bool iPAQ::setSoftSuspend ( bool soft ) { bool res = false; int fd; if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) { if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 ) res = true; else ::perror ( "write to /proc/sys/ts/suspend_button_mode" ); ::close ( fd ); } else ::perror ( "/proc/sys/ts/suspend_button_mode" ); return res; } bool iPAQ::setDisplayBrightness ( int bright ) { bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) { FLITE_IN bl; bl. mode = 1; bl. pwr = bright ? 1 : 0; bl. brightness = ( bright * ( displayBrightnessResolution() - 1 ) + 127 ) / 255; res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 ); ::close ( fd ); } return res; } int iPAQ::displayBrightnessResolution() const { switch ( model()) { case Model_iPAQ_H31xx: case Model_iPAQ_H36xx: case Model_iPAQ_H37xx: return 128; // really 256, but >128 could damage the LCD case Model_iPAQ_H38xx: case Model_iPAQ_H39xx: return 64; case Model_iPAQ_H5xxx: return 255; default: return 2; } } bool iPAQ::hasLightSensor() const { return true; } int iPAQ::readLightSensor() { int fd; int val = -1; if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) { char buffer [8]; if ( ::read ( fd, buffer, 5 ) == 5 ) { char *endptr; buffer [4] = 0; val = ::strtol ( buffer + 2, &endptr, 16 ); if ( *endptr != 0 ) val = -1; } ::close ( fd ); } return val; } int iPAQ::lightSensorResolution() const { return 256; } |