1 files changed, 112 insertions, 30 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index a134810..3ff029e 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -122,20 +122,23 @@ public:
         virtual void keySound ( );
         virtual void touchSound ( );
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
         virtual OLedState ledState ( OLed led ) const;
         virtual bool setLedState ( OLed led, OLedState st );
 
+        static bool isZaurus();
+
 protected:
         virtual void buzzer ( int snd );
 
         OLedState m_leds [1];
+        bool m_embedix;
 };
 
 class SIMpad : public ODevice, public QWSServer::KeyboardFilter {
 protected:
         virtual void init ( );
         virtual void initButtons ( );
 
 public:
@@ -378,20 +381,20 @@ static inline bool isQWS()
 {
         return qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 }
 
 ODevice *ODevice::inst ( )
 {
         static ODevice *dev = 0;
 
-        if ( !dev ) {
+                if ( !dev ) {   
                 if ( QFile::exists ( "/proc/hal/model" ))
                         dev = new iPAQ ( );
-                else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
+                else if ( Zaurus::isZaurus() )
                         dev = new Zaurus ( );
                 else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
                         dev = new SIMpad ( );
                 else if ( QFile::exists ( "/proc/sys/board/name" ))
                         dev = new Ramses ( );
                 else
                         dev = new ODevice ( );
 
@@ -1315,46 +1318,97 @@ int iPAQ::lightSensorResolution ( ) const
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
+// Check whether this device is the sharp zaurus..
+bool Zaurus::isZaurus()
+{
+
+        // If the special devices by embedix exist, it is quite simple: it is a Zaurus !
+        if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
+                return true;
+                }
+
+        // On non-embedix kenrnels, we have too look closer.
+        bool is_zaurus = false;
+        QFile f ( "/proc/cpuinfo" );
+        if ( f. open ( IO_ReadOnly ) ) {
+                QString model;
+                QFile f ( "/proc/cpuinfo" );
+
+                QTextStream ts ( &f );
+                QString line;
+                while( line = ts. readLine ( ) ) {
+                        if ( line. left ( 8 ) == "Hardware" )
+                                break;
+                }
+                int loc = line. find ( ":" );
+                if ( loc != -1 )
+                        model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
+
+                if ( model == "Sharp-Collie" 
+                     || model == "Collie" 
+                     || model == "SHARP Corgi"
+                     || model == "SHARP Shepherd" 
+                     || model == "SHARP Poodle" 
+                   )
+                        is_zaurus = true;
+
+          }
+        return is_zaurus;
+}
 
 
 void Zaurus::init ( )
 {
         d-> m_vendorstr = "Sharp";
         d-> m_vendor = Vendor_Sharp;
+        m_embedix = true;  // Not openzaurus means: It has an embedix kernel !
 
         // QFile f ( "/proc/filesystems" );
         QString model;
 
         // It isn't a good idea to check the system configuration to 
         // detect the distribution ! 
         // Otherwise it may happen that any other distribution is detected as openzaurus, just
         // because it uses a jffs2 filesystem..  
         // (eilers)
         // if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
         QFile f ("/etc/oz_version");
         if ( f.exists() ){
                 d-> m_vendorstr = "OpenZaurus Team";
                 d-> m_systemstr = "OpenZaurus";
                 d-> m_system = System_OpenZaurus;
 
-                // f. close ( );
-
-                // f. setName ( "/etc/oz_version" );
                 if ( f. open ( IO_ReadOnly )) {
                         QTextStream ts ( &f );
                         d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
                         f. close ( );
                 }
+
+                // Openzaurus sometimes uses the embedix kernel!
+                // => Check whether this is an embedix kernel
+                FILE *uname = popen("uname -r", "r");
+                QString line;
+                if ( f.open(IO_ReadOnly, uname) ) {
+                        QTextStream ts ( &f );
+                        line = ts. readLine ( );
+                        int loc = line. find ( "embedix" );
+                        if ( loc != -1 )
+                                m_embedix = true;
+                        else
+                                m_embedix = false;
+                        f. close ( );
+                }
+                pclose(uname);
         }
         else {
                 d-> m_systemstr = "Zaurus";
                 d-> m_system = System_Zaurus;
         }
 
         f. setName ( "/proc/cpuinfo" );
         if ( f. open ( IO_ReadOnly ) ) {
@@ -1370,20 +1424,20 @@ void Zaurus::init ( )
         }
 
         if ( model == "SHARP Corgi" ) {
                 d-> m_model = Model_Zaurus_SLC700;
                 d-> m_modelstr = "Zaurus SL-C700";
         } else if ( model == "SHARP Shepherd" ) {
                 d-> m_model = Model_Zaurus_SLC700; // Do we need a special type for the C750 ? (eilers)
                 d-> m_modelstr = "Zaurus SL-C750";
-        }else if ( model == "SHARP Poodle" ) {
+        } else if ( model == "SHARP Poodle" ) {
                 d-> m_model = Model_Zaurus_SLB600;
                 d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
-        } else if ( model = "Sharp-Collie" ) {
+        } else if ( model == "Sharp-Collie" || model == "Collie" ) {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
         } else {
                 d-> m_model = Model_Zaurus_SL5500;
                 d-> m_modelstr = "Zaurus (Model unknown)";
         }
 
         bool flipstate = false;
@@ -1438,26 +1492,29 @@ void Zaurus::initButtons ( )
 
         for ( int i = 0; i < buttoncount; i++ ) {
                 struct z_button *zb = pz_buttons + i;
                 ODeviceButton b;
 
                 b. setKeycode ( zb-> code );
                 b. setUserText ( QObject::tr ( "Button", zb-> utext ));
                 b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
-                b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
-                b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
+                b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), 
+                                                                  zb-> fpressedaction ));
+                b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), 
+                                                               zb-> fheldaction ));
 
                 d-> m_buttons-> append ( b );
         }
 
         reloadButtonMapping ( );
 
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
+        connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), 
+                  this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
@@ -1519,40 +1576,48 @@ typedef struct sharp_led_status {
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
-        // Not all devices have real sound.
 #ifndef QT_NO_SOUND
-        switch ( d-> m_model ) { 
-        case Model_Zaurus_SLC700:{
-                int fd;
-                int vol;
-                bool vol_reset = false;
+        QString soundname;
+
+        // Not all devices have real sound. But I expect
+        // that Openzaurus now has a sound driver which 
+                // I will use instead the buzzer...     
+        if ( ( d->m_model == Model_Zaurus_SLC700 )
+             || d->m_system == System_OpenZaurus ){
 
-                QString soundname;
-                
                 switch ( sound ){
                 case SHARP_BUZ_SCHEDULE_ALARM:
                         soundname = "alarm";
                         break;
                 case SHARP_BUZ_TOUCHSOUND:
                         soundname = "touchsound";
                         break;
                 case SHARP_BUZ_KEYSOUND:
                         soundname = "keysound";
                         break;
                 default:
                         soundname = "alarm";
                         
                 }
+        }
+
+        // If a soundname is defined, we expect that this device has
+        // sound capabilities.. Otherwise we expect to have the buzzer
+        // device..
+        if ( !soundname.isEmpty() ){
+                int fd;
+                int vol;
+                bool vol_reset = false;
 
                 Sound snd ( soundname );
                 
                 if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
                         if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
                                 Config cfg ( "qpe" );
                                 cfg. setGroup ( "Volume" );
 
@@ -1572,27 +1637,25 @@ void Zaurus::buzzer ( int sound )
                 while ( !snd. isFinished ( ))
                         qApp-> processEvents ( );
 
                 if ( fd >= 0 ) {
                         if ( vol_reset )
                                 ::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
                         ::close ( fd );
                 }
-                break;
-        }
-        default:{ // Devices with buzzer
+                } else {        
                 int fd = ::open ( "/dev/sharp_buz", O_WRONLY|O_NONBLOCK );
                 
                 if ( fd >= 0 ) {
                         ::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
                         ::close ( fd );
                 }
-        }
-        }
+
+        } 
 #endif
 }
 
 
 void Zaurus::alarmSound ( )
 {
         buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
 }
@@ -1629,16 +1692,19 @@ OLedState Zaurus::ledState ( OLed which ) const
         if ( which == Led_Mail )
                 return m_leds [0];
         else
                 return Led_Off;
 }
 
 bool Zaurus::setLedState ( OLed which, OLedState st )
 {
+        if (!m_embedix) // Currently not supported on non_embedix kernels
+                return false;
+
         static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK );
 
         if ( which == Led_Mail ) {
                 if ( fd >= 0 ) {
                         struct sharp_led_status leds;
                         ::memset ( &leds, 0, sizeof( leds ));
                         leds. which = SHARP_LED_MAIL_EXISTS;
                         bool ok = true;
@@ -1656,16 +1722,21 @@ bool Zaurus::setLedState ( OLed which, OLedState st )
                         }
                 }
         }
         return false;
 }
 
 bool Zaurus::setSoftSuspend ( bool soft )
 {
+        if (!m_embedix) {
+                /* non-Embedix kernels dont have kernel autosuspend */
+                return ODevice::setSoftSuspend( soft );
+        }
+
         bool res = false;
         int fd;
 
         if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) ||
         (( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) {
 
                 int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources
 
@@ -1697,30 +1768,41 @@ bool Zaurus::setDisplayBrightness ( int bright )
         bool res = false;
         int fd;
 
         if ( bright > 255 )
                 bright = 255;
         if ( bright < 0 )
                 bright = 0;
 
-        if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
-                int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
-                if ( bright && !bl )
-                        bl = 1;
-                res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
-                ::close ( fd );
+        if (m_embedix) {
+                if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
+                        int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
+                        if ( bright && !bl )
+                                bl = 1;
+                        res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
+                        ::close ( fd );
+                }
+        } else {
+#define FB_BACKLIGHT_SET_BRIGHTNESS     _IOW('F', 1, u_int)             /* set brightness */
+                if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
+                        res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
+                        ::close ( fd );
+                }
         }
         return res;
 }
 
 
 int Zaurus::displayBrightnessResolution ( ) const
 {
-        return 5;
+        if (m_embedix)
+                return 5;
+        else
+                return 256;
 }
 
 /**************************************************
  *
  * SIMpad
  *
  **************************************************/