9 files changed, 53 insertions, 15 deletions

diff --git a/noncore/net/networksetup/TODO b/noncore/net/networksetup/TODO
index 93cbab7..6457836 100644
--- a/noncore/net/networksetup/TODO
+++ b/noncore/net/networksetup/TODO
@@ -1,28 +1,44 @@
+Types:
+-Ethernet Connection (Done)
+-ISDN Connection
+-Modem COnnection (Started)
+-xDSL connection
+-Token Ring Connection
+-CIPE (VPN) connection (ipsec?)
+-Wireless Connection (Done)
+-Bluetooth
+-IPChains?
+
 test WEP
-WEP key in file wireless.conf is not encrypted !, therefore it is very easy to get the key out of the zaurus..
-WEP transimtion rat
+Add WEP transimtion rate
 1 or 2
 5.5
 1
 Auto
 
 udchcp needs to output the dhcp information so interfaces can read it
 
 interfacesetupimp really doesn't need a interface* pointer
 
-Possible other modules to write: ppp, ipsec, bluetooth, ipchains
-
 PPP module needs to scan pppd.tdb to see what is currently active
 
-WLAN - add possiblity to input text or hex without knowing "s:"
+WLAN
+- add possiblity to input text or hex without knowing "s:"
+- Handle "any" and any the same way in config
 
 Interface setupimp needs to use kernel calls.
 
+Add a route/DNS editor under the ViewAdvancedInfo button
+
+Use a true TCP/IP widget
+
+Make it so that pcmcia doesn't need to be stopped/started for wlan
+
 Automaticly update the main list of interfaces:
 > That would be me. :-D  netlink, can you point me in the right
 > direction where  I can get more info on it?  (I figured there was some
 > kenel call) 
 
 You can look up the meaning of the packets you receive, or you can just go 
 poll for changes you might be interested in each time you receive _any_ 
 packet. Anything's better than periodic polling.
diff --git a/noncore/net/networksetup/mainwindow.ui b/noncore/net/networksetup/mainwindow.ui
index 3d30994..dcabc52 100644
--- a/noncore/net/networksetup/mainwindow.ui
+++ b/noncore/net/networksetup/mainwindow.ui
@@ -12,17 +12,17 @@
             <x>0</x>
             <y>0</y>
             <width>240</width>
             <height>289</height>
         </rect>
     </property>
     <property stdset="1">
         <name>caption</name>
-        <string>Network Setup</string>
+        <string>Network Settings</string>
     </property>
     <vbox>
         <property stdset="1">
             <name>margin</name>
             <number>0</number>
         </property>
         <property stdset="1">
             <name>spacing</name>
diff --git a/noncore/net/networksetup/opie-networksetup.control b/noncore/net/networksetup/opie-networksetup.control
index 3d6a32c..585e50e 100644
--- a/noncore/net/networksetup/opie-networksetup.control
+++ b/noncore/net/networksetup/opie-networksetup.control
@@ -1,8 +1,8 @@
 Files: bin/networksetup apps/Settings/networksetup.desktop plugins/networksetup/* pics/networksetup/* pics/Network/PPPConnect.png $QTDIR/lib/libinterfaces.so.1.0.0 $QTDIR/lib/libinterfaces.so.1.0 $QTDIR/lib/libinterfaces.so.1 root/usr/bin/changedns bin/getprofile
 Priority: optional
 Section: opie/settings
 Maintainer: Ben Meyer <meyerb@sharpsec.com> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
 Depends: opie-base ($QPE_VERSION)
-Description: Opie network setup tool
+Description: Network settings
diff --git a/noncore/net/networksetup/wlan/wlanimp.cpp b/noncore/net/networksetup/wlan/wlanimp.cpp
index 648932f..1782c22 100644
--- a/noncore/net/networksetup/wlan/wlanimp.cpp
+++ b/noncore/net/networksetup/wlan/wlanimp.cpp
@@ -226,16 +226,19 @@ void WLANImp::accept(){
     return;
 
   // Restart the device now that the settings have changed
   QString initpath;
   if( QDir("/etc/rc.d/init.d").exists() )
     initpath = "/etc/rc.d/init.d";
   else if( QDir("/etc/init.d").exists() )
     initpath = "/etc/init.d";
+
+  // It would be kinda cool if we didn't have to do this and could just to ifup/down
+  
   if( initpath )
     system(QString("%1/pcmcia stop").arg(initpath));
   if( initpath )
     system(QString("%1/pcmcia start").arg(initpath));
 
   // Close out the dialog
   QDialog::accept();
 }
diff --git a/noncore/settings/networksettings/TODO b/noncore/settings/networksettings/TODO
index 93cbab7..6457836 100644
--- a/noncore/settings/networksettings/TODO
+++ b/noncore/settings/networksettings/TODO
@@ -1,28 +1,44 @@
+Types:
+-Ethernet Connection (Done)
+-ISDN Connection
+-Modem COnnection (Started)
+-xDSL connection
+-Token Ring Connection
+-CIPE (VPN) connection (ipsec?)
+-Wireless Connection (Done)
+-Bluetooth
+-IPChains?
+
 test WEP
-WEP key in file wireless.conf is not encrypted !, therefore it is very easy to get the key out of the zaurus..
-WEP transimtion rat
+Add WEP transimtion rate
 1 or 2
 5.5
 1
 Auto
 
 udchcp needs to output the dhcp information so interfaces can read it
 
 interfacesetupimp really doesn't need a interface* pointer
 
-Possible other modules to write: ppp, ipsec, bluetooth, ipchains
-
 PPP module needs to scan pppd.tdb to see what is currently active
 
-WLAN - add possiblity to input text or hex without knowing "s:"
+WLAN
+- add possiblity to input text or hex without knowing "s:"
+- Handle "any" and any the same way in config
 
 Interface setupimp needs to use kernel calls.
 
+Add a route/DNS editor under the ViewAdvancedInfo button
+
+Use a true TCP/IP widget
+
+Make it so that pcmcia doesn't need to be stopped/started for wlan
+
 Automaticly update the main list of interfaces:
 > That would be me. :-D  netlink, can you point me in the right
 > direction where  I can get more info on it?  (I figured there was some
 > kenel call) 
 
 You can look up the meaning of the packets you receive, or you can just go 
 poll for changes you might be interested in each time you receive _any_ 
 packet. Anything's better than periodic polling.
diff --git a/noncore/settings/networksettings/mainwindow.ui b/noncore/settings/networksettings/mainwindow.ui
index 3d30994..dcabc52 100644
--- a/noncore/settings/networksettings/mainwindow.ui
+++ b/noncore/settings/networksettings/mainwindow.ui
@@ -12,17 +12,17 @@
             <x>0</x>
             <y>0</y>
             <width>240</width>
             <height>289</height>
         </rect>
     </property>
     <property stdset="1">
         <name>caption</name>
-        <string>Network Setup</string>
+        <string>Network Settings</string>
     </property>
     <vbox>
         <property stdset="1">
             <name>margin</name>
             <number>0</number>
         </property>
         <property stdset="1">
             <name>spacing</name>
diff --git a/noncore/settings/networksettings/opie-networksettings.control b/noncore/settings/networksettings/opie-networksettings.control
index 3d6a32c..585e50e 100644
--- a/noncore/settings/networksettings/opie-networksettings.control
+++ b/noncore/settings/networksettings/opie-networksettings.control
@@ -1,8 +1,8 @@
 Files: bin/networksetup apps/Settings/networksetup.desktop plugins/networksetup/* pics/networksetup/* pics/Network/PPPConnect.png $QTDIR/lib/libinterfaces.so.1.0.0 $QTDIR/lib/libinterfaces.so.1.0 $QTDIR/lib/libinterfaces.so.1 root/usr/bin/changedns bin/getprofile
 Priority: optional
 Section: opie/settings
 Maintainer: Ben Meyer <meyerb@sharpsec.com> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
 Depends: opie-base ($QPE_VERSION)
-Description: Opie network setup tool
+Description: Network settings
diff --git a/noncore/settings/networksettings/opie-networksetup.control b/noncore/settings/networksettings/opie-networksetup.control
index 3d6a32c..585e50e 100644
--- a/noncore/settings/networksettings/opie-networksetup.control
+++ b/noncore/settings/networksettings/opie-networksetup.control
@@ -1,8 +1,8 @@
 Files: bin/networksetup apps/Settings/networksetup.desktop plugins/networksetup/* pics/networksetup/* pics/Network/PPPConnect.png $QTDIR/lib/libinterfaces.so.1.0.0 $QTDIR/lib/libinterfaces.so.1.0 $QTDIR/lib/libinterfaces.so.1 root/usr/bin/changedns bin/getprofile
 Priority: optional
 Section: opie/settings
 Maintainer: Ben Meyer <meyerb@sharpsec.com> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
 Depends: opie-base ($QPE_VERSION)
-Description: Opie network setup tool
+Description: Network settings
diff --git a/noncore/settings/networksettings/wlan/wlanimp.cpp b/noncore/settings/networksettings/wlan/wlanimp.cpp
index 648932f..1782c22 100644
--- a/noncore/settings/networksettings/wlan/wlanimp.cpp
+++ b/noncore/settings/networksettings/wlan/wlanimp.cpp
@@ -226,16 +226,19 @@ void WLANImp::accept(){
     return;
 
   // Restart the device now that the settings have changed
   QString initpath;
   if( QDir("/etc/rc.d/init.d").exists() )
     initpath = "/etc/rc.d/init.d";
   else if( QDir("/etc/init.d").exists() )
     initpath = "/etc/init.d";
+
+  // It would be kinda cool if we didn't have to do this and could just to ifup/down
+  
   if( initpath )
     system(QString("%1/pcmcia stop").arg(initpath));
   if( initpath )
     system(QString("%1/pcmcia start").arg(initpath));
 
   // Close out the dialog
   QDialog::accept();
 }