| -rw-r--r-- | libopie/odevice.cpp | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp index 02f13b5..2873407 100644 --- a/libopie/odevice.cpp +++ b/libopie/odevice.cpp @@ -1420,193 +1420,196 @@ bool Zaurus::setLedState ( OLed which, OLedState st ) case Led_Off : leds. status = LED_MAIL_NO_UNREAD_MAIL; break; case Led_On : leds. status = LED_MAIL_NEWMAIL_EXISTS; break; case Led_BlinkSlow: leds. status = LED_MAIL_UNREAD_MAIL_EX; break; default : ok = false; } if ( ok && ( ::ioctl ( fd, SHARP_LED_SETSTATUS, &leds ) >= 0 )) { m_leds [0] = st; return true; } } } return false; } bool Zaurus::setSoftSuspend ( bool soft ) { bool res = false; int fd; if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) || (( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) { int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources if ( sources >= 0 ) { if ( soft ) sources &= ~APM_EVT_POWER_BUTTON; else sources |= APM_EVT_POWER_BUTTON; if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources res = true; else perror ( "APM_IOCGEVTSRC" ); } else perror ( "APM_IOCGEVTSRC" ); ::close ( fd ); } else perror ( "/dev/apm_bios or /dev/misc/apm_bios" ); return res; } bool Zaurus::setDisplayBrightness ( int bright ) { bool res = false; int fd; if ( bright > 255 ) bright = 255; if ( bright < 0 ) bright = 0; if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) { int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus if ( bright && !bl ) bl = 1; res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 ); ::close ( fd ); } return res; } int Zaurus::displayBrightnessResolution ( ) const { return 5; } /************************************************** * * SIMpad * **************************************************/ void SIMpad::init ( ) { d-> m_vendorstr = "SIEMENS"; d-> m_vendor = Vendor_SIEMENS; QFile f ( "/proc/hal/model" ); //TODO Implement model checking //FIXME For now we assume an SL4 d-> m_modelstr = "SL4"; d-> m_model = Model_SIMpad_SL4; switch ( d-> m_model ) { default: - d-> m_rotation = Rot270; + d-> m_rotation = Rot0; + d-> m_direction = CCW; + d-> m_holdtime = 1000; // 1000ms + break; } f. setName ( "/etc/familiar-version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "Familiar"; d-> m_system = System_Familiar; QTextStream ts ( &f ); d-> m_sysverstr = ts. readLine ( ). mid ( 10 ); f. close ( ); } else { f. setName ( "/etc/oz_version" ); if ( f. open ( IO_ReadOnly )) { d-> m_systemstr = "OpenEmbedded/SIMpad"; d-> m_system = System_OpenZaurus; QTextStream ts ( &f ); ts.setDevice ( &f ); d-> m_sysverstr = ts. readLine ( ); f. close ( ); } } m_leds [0] = m_leds [1] = Led_Off; m_power_timer = 0; } void SIMpad::initButtons ( ) { if ( d-> m_buttons ) return; if ( isQWS( ) ) QWSServer::setKeyboardFilter ( this ); d-> m_buttons = new QValueList <ODeviceButton>; for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) { s_button *sb = simpad_buttons + i; ODeviceButton b; if (( sb-> model & d-> m_model ) == d-> m_model ) { b. setKeycode ( sb-> code ); b. setUserText ( QObject::tr ( "Button", sb-> utext )); b. setPixmap ( Resource::loadPixmap ( sb-> pix )); b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction )); b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction )); d-> m_buttons-> append ( b ); } } reloadButtonMapping ( ); QCopChannel *sysch = new QCopChannel ( "QPE/System", this ); connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & ))); } // SIMpad boardcontrol register CS3 #define SIMPAD_BOARDCONTROL "/proc/cs3" #define SIMPAD_VCC_5V_EN 0x0001 // For 5V PCMCIA #define SIMPAD_VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA #define SIMPAD_EN1 0x0004 // This is only for EPROM's #define SIMPAD_EN0 0x0008 // Both should be enable for 3.3V or 5V #define SIMPAD_DISPLAY_ON 0x0010 #define SIMPAD_PCMCIA_BUFF_DIS 0x0020 #define SIMPAD_MQ_RESET 0x0040 #define SIMPAD_PCMCIA_RESET 0x0080 #define SIMPAD_DECT_POWER_ON 0x0100 #define SIMPAD_IRDA_SD 0x0200 // Shutdown for powersave #define SIMPAD_RS232_ON 0x0400 #define SIMPAD_SD_MEDIAQ 0x0800 // Shutdown for powersave #define SIMPAD_LED2_ON 0x1000 #define SIMPAD_IRDA_MODE 0x2000 // Fast/Slow IrDA mode #define SIMPAD_ENABLE_5V 0x4000 // Enable 5V circuit #define SIMPAD_RESET_SIMCARD 0x8000 //SIMpad touchscreen backlight strength control #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL" #define SIMPAD_BACKLIGHT_MASK 0x00a10044 QValueList <OLed> SIMpad::ledList ( ) const { QValueList <OLed> vl; vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one? //vl << Led_Mail; //TODO find out if LED1 is accessible anyway return vl; } QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const { QValueList <OLedState> vl; |