| -rw-r--r-- | libopie2/opieui/big-screen/osplitter.cpp | 2 | ||||
| -rw-r--r-- | library/qpeapplication.cpp | 10 | ||||
| -rw-r--r-- | noncore/applets/pcmcia/pcmcia.cpp | 6 | ||||
| -rw-r--r-- | noncore/apps/checkbook/mainwindow.cpp | 7 | ||||
| -rw-r--r-- | noncore/apps/opie-console/procctl.cpp | 5 | ||||
| -rw-r--r-- | noncore/apps/tinykate/libkate/document/katedocument.cpp | 123 | ||||
| -rw-r--r-- | noncore/settings/sysinfo/devicesinfo.cpp | 2 | ||||
| -rw-r--r-- | noncore/todayplugins/stockticker/libstocks/http.c | 2 |
8 files changed, 83 insertions, 74 deletions
diff --git a/libopie2/opieui/big-screen/osplitter.cpp b/libopie2/opieui/big-screen/osplitter.cpp index 78e919a..5d1e2cf 100644 --- a/libopie2/opieui/big-screen/osplitter.cpp +++ b/libopie2/opieui/big-screen/osplitter.cpp @@ -134,193 +134,193 @@ QString OSplitter::label()const /** * This function sets the size change policy of the splitter. * If this size marked is crossed the splitter will relayout. * Note: that depending on the set Orientation it'll either look * at the width or height. * Note: If you want to from side to side view to tabbed view you need * to make sure that the size you supply is not smaller than the minimum * size of your added widgets. Note that if you use widgets like QComboBoxes * you need to teach them to accept smaller sizes as well @see QWidget::setSizePolicy * * @param width_height The mark that will be watched. Interpreted depending on the Orientation of the Splitter. * @return void */ void OSplitter::setSizeChange( int width_height ) { m_size_policy = width_height; QSize sz(width(), height() ); QResizeEvent ev(sz, sz ); resizeEvent(&ev); } /** * This functions allows to add another OSplitter and to share * the OTabBar in small screen mode. The ownerships gets transfered. * OSplitters are always added after normal widget items */ void OSplitter::addWidget( OSplitter* split ) { m_splitter.append( split ); /* * set tab widget */ if (m_tabWidget ) setTabWidget( m_parentTab ); else { OSplitterContainer con; con.widget =split; addToBox( con ); } } /* * If in a tab it should be removed * and if in a hbox the reparent kills it too */ /** * This removes the splitter again. You currently need to call this * before you delete or otherwise you can get mem corruption * or other weird behaviour. * Owner ship gets transfered back to you it's current parent * is 0 */ void OSplitter::removeWidget( OSplitter* split) { split->setTabWidget( 0 ); split->reparent( 0, 0, QPoint(0, 0) ); } /** * Adds a widget to the Splitter. The widgets gets inserted * at the end of either the Box or TabWidget. * Ownership gets transfered and the widgets gets reparented. * Note: icon and label is only available on small screensizes * if size is smaller than the mark * Warning: No null checking of the widget is done. Only on debug * a message will be outputtet * * @param wid The widget which will be added * @param icon The icon of the possible Tab * @param label The label of the possible Tab */ void OSplitter::addWidget( QWidget* wid, const QString& icon, const QString& label ) { #ifdef DEBUG if (!wid ) return; #endif OSplitterContainer cont; cont.widget = wid; cont.icon =icon; cont.name = label; m_container.append( cont ); /* * */ if (!m_splitter.isEmpty() && (m_tabWidget || m_parentTab ) ) setTabWidget( m_parentTab ); else { if (m_hbox ) addToBox( cont ); - else + else if (m_tabWidget) addToTab( cont ); } } /** * Removes the widget from the tab widgets if necessary. * OSplitter drops ownership of this widget and the widget * will be reparented i tto 0. * The widget will not be deleted. * * @param w The widget to be removed */ void OSplitter::removeWidget( QWidget* w) { ContainerList::Iterator it; for ( it = m_container.begin(); it != m_container.end(); ++it ) if ( (*it).widget == w ) break; if (it == m_container.end() ) return; /* only tab needs to be removed.. box recognizes it */ if ( !m_hbox ) removeFromTab( w ); /* Find reparent it and remove it from our list */ w->reparent( 0, 0, QPoint(0, 0)); it = m_container.remove( it ); } /** * This method will give focus to the widget. If in a tabwidget * the tabbar will be changed * * @param w The widget which will be set the current one */ void OSplitter::setCurrentWidget( QWidget* w) { if (m_tabWidget ) m_tabWidget->setCurrentTab( w ); // else // m_hbox->setFocus( w ); } /** * This is an overloaded member function and only differs in the * argument it takes. * Searches list of widgets for label. It'll pick the first label it finds * * @param label Label to look for. First match will be taken */ void OSplitter::setCurrentWidget( const QString& label ) { ContainerList::Iterator it; for (it = m_container.begin(); it != m_container.end(); ++it ) { if ( (*it).name == label ) { setCurrentWidget( (*it).widget ); break; } } } /** * This will only work when the TabWidget is active * If everything is visible this signal is kindly ignored * @see OTabWidget::setCurrentTab(int) * * @param tab The tab to make current */ void OSplitter::setCurrentWidget( int tab ) { if (m_tabWidget ) m_tabWidget->setCurrentTab( tab ); } /** * return the currently activated widget if in tab widget mode * or null because all widgets are visible */ QWidget* OSplitter::currentWidget() const { if (m_tabWidget) return m_tabWidget->currentWidget(); else if (m_parentTab ) return m_parentTab->currentWidget(); diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp index 34f5e6a..d959c7a 100644 --- a/library/qpeapplication.cpp +++ b/library/qpeapplication.cpp @@ -1676,198 +1676,198 @@ void QPEApplication::pidMessage( const QCString& msg, const QByteArray& data) if ( d->qpe_main_widget && !d->qpe_main_widget->isVisible() ) quit(); } else if ( msg == "close()" ) { hideOrQuit(); } else if ( msg == "disablePreload()" ) { d->preloaded = FALSE; d->keep_running = TRUE; /* so that quit will quit */ } else if ( msg == "enablePreload()" ) { if (d->qpe_main_widget) d->preloaded = TRUE; d->keep_running = TRUE; /* so next quit won't quit */ } else if ( msg == "raise()" ) { d->keep_running = TRUE; d->notbusysent = FALSE; raiseAppropriateWindow(); // Tell the system we're still chugging along... QCopEnvelope e("QPE/System", "appRaised(QString)"); e << d->appName; } else if ( msg == "flush()" ) { emit flush(); // we need to tell the desktop QCopEnvelope e( "QPE/Desktop", "flushDone(QString)" ); e << d->appName; } else if ( msg == "reload()" ) { emit reload(); } else if ( msg == "setDocument(QString)" ) { d->keep_running = TRUE; QDataStream stream( data, IO_ReadOnly ); QString doc; stream >> doc; QWidget *mw = mainWidget(); if ( !mw ) mw = d->qpe_main_widget; if ( mw ) Global::setDocument( mw, doc ); } else if ( msg == "QPEProcessQCop()" ) { processQCopFile(); d->sendQCopQ(); }else { bool p = d->keep_running; d->keep_running = FALSE; emit appMessage( msg, data); if ( d->keep_running ) { d->notbusysent = FALSE; raiseAppropriateWindow(); if ( !p ) { // Tell the system we're still chugging along... #ifndef QT_NO_COP QCopEnvelope e("QPE/System", "appRaised(QString)"); e << d->appName; #endif } } if ( p ) d->keep_running = p; } #endif } /*! Sets widget \a mw as the mainWidget() and shows it. For small windows, consider passing TRUE for \a nomaximize rather than the default FALSE. \sa showMainDocumentWidget() */ void QPEApplication::showMainWidget( QWidget* mw, bool nomaximize ) { // setMainWidget(mw); this breaks FastLoading because lastWindowClose() would quit d->show(mw, nomaximize ); } /*! Sets widget \a mw as the mainWidget() and shows it. For small windows, consider passing TRUE for \a nomaximize rather than the default FALSE. This calls designates the application as a \link docwidget.html document-oriented\endlink application. The \a mw widget \e must have this slot: setDocument(const QString&). \sa showMainWidget() */ void QPEApplication::showMainDocumentWidget( QWidget* mw, bool nomaximize ) { - if ( mw && argc() == 2 ) - Global::setDocument( mw, QString::fromUtf8(argv()[1]) ); + if ( mw ) { + if ( argc() == 2 ) + Global::setDocument( mw, QString::fromUtf8(argv()[1]) ); - -// setMainWidget(mw); see above - d->show(mw, nomaximize ); + d->show(mw, nomaximize ); + } } /*! If an application is started via a \link qcop.html QCop\endlink message, the application will process the \link qcop.html QCop\endlink message and then quit. If the application calls this function while processing a \link qcop.html QCop\endlink message, after processing its outstanding \link qcop.html QCop\endlink messages the application will start 'properly' and show itself. \sa keepRunning() */ void QPEApplication::setKeepRunning() { if ( qApp && qApp->inherits( "QPEApplication" ) ) { QPEApplication * qpeApp = ( QPEApplication* ) qApp; qpeApp->d->keep_running = TRUE; } } /*! Returns TRUE if the application will quit after processing the current list of qcop messages; otherwise returns FALSE. \sa setKeepRunning() */ bool QPEApplication::keepRunning() const { return d->keep_running; } /*! \internal */ void QPEApplication::internalSetStyle( const QString &style ) { #if QT_VERSION >= 0x030000 if ( style == "QPE" ) { setStyle( new QPEStyle ); } else { QStyle *s = QStyleFactory::create( style ); if ( s ) setStyle( s ); } #else if ( style == "Windows" ) { setStyle( new QWindowsStyle ); } else if ( style == "QPE" ) { setStyle( new QPEStyle ); } else if ( style == "Light" ) { setStyle( new LightStyle ); } #ifndef QT_NO_STYLE_PLATINUM else if ( style == "Platinum" ) { setStyle( new QPlatinumStyle ); } #endif #ifndef QT_NO_STYLE_MOTIF else if ( style == "Motif" ) { setStyle( new QMotifStyle ); } #endif #ifndef QT_NO_STYLE_MOTIFPLUS else if ( style == "MotifPlus" ) { setStyle( new QMotifPlusStyle ); } #endif else { QStyle *sty = 0; QString path = QPEApplication::qpeDir ( ) + "plugins/styles/"; #ifdef Q_OS_MACX if ( style. find ( ".dylib" ) > 0 ) path += style; else path = path + "lib" + style. lower ( ) + ".dylib"; // compatibility #else if ( style. find ( ".so" ) > 0 ) path += style; else path = path + "lib" + style. lower ( ) + ".so"; // compatibility #endif static QLibrary *lastlib = 0; static StyleInterface *lastiface = 0; QLibrary *lib = new QLibrary ( path ); StyleInterface *iface = 0; if (( lib-> queryInterface ( IID_Style, ( QUnknownInterface ** ) &iface ) == QS_OK ) && iface ) sty = iface-> style ( ); diff --git a/noncore/applets/pcmcia/pcmcia.cpp b/noncore/applets/pcmcia/pcmcia.cpp index 187adc6..c639002 100644 --- a/noncore/applets/pcmcia/pcmcia.cpp +++ b/noncore/applets/pcmcia/pcmcia.cpp @@ -143,192 +143,198 @@ enum { EJECT, INSERT, SUSPEND, RESUME, RESET, CONFIGURE, ACTIVATE }; static const char* actionText[] = { "eject", "insert", "suspend", "resum", "resett", "configur", "activat" }; void PcmciaManager::mousePressEvent( QMouseEvent* ) { QPopupMenu* menu = new QPopupMenu( this ); QStringList cmd; bool execute = true; OPcmciaSystem* sys = OPcmciaSystem::instance(); sys->synchronize(); OPcmciaSystem::CardIterator it = sys->iterator(); if ( !sys->count() ) return; int i = 0; while ( it.current() ) { QPopupMenu* submenu = new QPopupMenu( menu ); submenu->insertItem( "&Eject", EJECT+i*100 ); submenu->insertItem( "&Insert", INSERT+i*100 ); submenu->insertItem( "&Suspend", SUSPEND+i*100 ); submenu->insertItem( "&Resume", RESUME+i*100 ); submenu->insertItem( "Rese&t", RESET+i*100 ); submenu->insertItem( "&Configure", CONFIGURE+i*100 ); bool isSuspended = it.current()->isSuspended(); bool isEmpty = it.current()->isEmpty(); submenu->setItemEnabled( EJECT+i*100, !isEmpty ); submenu->setItemEnabled( INSERT+i*100, isEmpty ); submenu->setItemEnabled( SUSPEND+i*100, !isEmpty && !isSuspended ); submenu->setItemEnabled( RESUME+i*100, !isEmpty && isSuspended ); submenu->setItemEnabled( RESET+i*100, !isEmpty && !isSuspended ); submenu->setItemEnabled( CONFIGURE+i*100, !isEmpty && !configuring ); connect( submenu, SIGNAL(activated(int)), this, SLOT(userCardAction(int)) ); menu->insertItem( tr( "%1: %2" ).arg( i++ ).arg( it.current()->identity() ), submenu, 1 ); ++it; } QPoint p = mapToGlobal( QPoint( 0, 0 ) ); QSize s = menu->sizeHint(); int opt = menu->exec( QPoint( p.x() + ( width() / 2 ) - ( s.width() / 2 ), p.y() - s.height() ), 0 ); qDebug( "pcmcia: menu result = %d", opt ); delete menu; } void PcmciaManager::cardMessage( const QCString & msg, const QByteArray & ) { odebug << "PcmciaManager::cardMessage( '" << msg << "' )" << oendl; if ( msg != "stabChanged()" ) return; /* check if a previously unknown card has been inserted */ OPcmciaSystem::instance()->synchronize(); if ( !OPcmciaSystem::instance()->cardCount() ) return; OConfig cfg( "PCMCIA" ); cfg.setGroup( "Global" ); int nCards = cfg.readNumEntry( "nCards", 0 ); OPcmciaSystem* sys = OPcmciaSystem::instance(); OPcmciaSystem::CardIterator it = sys->iterator(); bool newCard = true; OPcmciaSocket* theCard = 0; while ( it.current() && newCard ) { if ( it.current()->isEmpty() ) { odebug << "pcmcia: skipping empty card in socket " << it.current()->number() << oendl; ++it; continue; } else { theCard = it.current(); QString cardName = theCard->productIdentity(); for ( int i = 0; i < nCards; ++i ) { QString cardSection = QString( "Card_%1" ).arg( i ); cfg.setGroup( cardSection ); QString name = cfg.readEntry( "name" ); odebug << "pcmcia: comparing card '" << cardName << "' with known card '" << name << "'" << oendl; if ( cardName == name ) { newCard = false; odebug << "pcmcia: we have seen this card before" << oendl; executeAction( theCard, "insert" ); break; } } if ( !newCard ) ++it; else break; } } + + if ( !theCard ) { + owarn << "pcmcia: Finished working through cards in PCMCIA system but I do not have a valid card handle" << oendl; + return; + } + if ( newCard ) { odebug << "pcmcia: unconfigured card detected" << oendl; QString newCardName = theCard->productIdentity(); int result = QMessageBox::information( qApp->desktop(), tr( "PCMCIA/CF Subsystem" ), tr( "<qt>You have inserted the card<br/><b>%1</b><br/>This card is not yet configured. Do you want to configure it now?</qt>" ).arg( newCardName ), tr( "Yes" ), tr( "No" ), 0, 0, 1 ); odebug << "pcmcia: result = " << result << oendl; if ( result == 0 ) { configure( theCard ); } else { odebug << "pcmcia: user doesn't want to configure " << newCardName << " now." << oendl; } } else // it's an already configured card { odebug << "pcmcia: doing nothing... why do we come here?" << oendl; } } void PcmciaManager::paintEvent( QPaintEvent * ) { QPainter p( this ); p.drawPixmap( 0, 0, pm ); } int PcmciaManager::position() { return 7; } void PcmciaManager::execCommand( const QStringList &strList ) { } void PcmciaManager::userCardAction( int action ) { odebug << "pcmcia: user action on socket " << action / 100 << " requested. action = " << action << oendl; int socket = action / 100; int what = action % 100; bool success = false; switch ( what ) { case CONFIGURE: { QString insertAction; QString resumeAction; QString driver; QString conf; configure( OPcmciaSystem::instance()->socket( socket ) ); return; } case EJECT: success = OPcmciaSystem::instance()->socket( socket )->eject(); break; case INSERT: success = OPcmciaSystem::instance()->socket( socket )->insert(); break; case SUSPEND: success = OPcmciaSystem::instance()->socket( socket )->suspend(); break; case RESUME: success = OPcmciaSystem::instance()->socket( socket )->resume(); break; case RESET: success = OPcmciaSystem::instance()->socket( socket )->reset(); break; case ACTIVATE: success = true; break; default: odebug << "pcmcia: not yet implemented" << oendl; } if ( success ) { odebug << tr( "Successfully %1ed card in socket #%2" ).arg( actionText[action] ).arg( socket ) << oendl; popUp( tr( "Successfully %1ed card in socket #%2" ).arg( actionText[action] ).arg( socket ) ); } else { odebug << tr( "Error while %1ing card in socket #%2" ).arg( actionText[action] ).arg( socket ) << oendl; popUp( tr( "Error while %1ing card in socket #%2" ).arg( actionText[action] ).arg( socket ) ); } } void PcmciaManager::configure( OPcmciaSocket* card ) { configuring = true; ConfigDialog dialog( card, qApp->desktop() ); int result = QPEApplication::execDialog( &dialog, false ); configuring = false; odebug << "pcmcia: configresult = " << result << oendl; if ( result ) { dialog.writeConfiguration( card ); } } void PcmciaManager::executeAction( Opie::Core::OPcmciaSocket* card, const QString& type ) diff --git a/noncore/apps/checkbook/mainwindow.cpp b/noncore/apps/checkbook/mainwindow.cpp index d9e2047..8e2e2e3 100644 --- a/noncore/apps/checkbook/mainwindow.cpp +++ b/noncore/apps/checkbook/mainwindow.cpp @@ -150,214 +150,213 @@ MainWindow::~MainWindow() // --- buildList -------------------------------------------------------------- void MainWindow::buildList() { if ( cbList ) delete cbList; cbList = new QListView( this ); QWhatsThis::add( cbList, tr( "This is a listing of all checkbooks currently available." ) ); if ( _cfg.getShowLocks() ) { cbList->addColumn( lockIcon, "", 24 ); posName = 1; } else { posName = 0; } cbList->addColumn( tr( "Checkbook Name" ) ); if ( _cfg.getShowBalances() ) { int colnum = cbList->addColumn( tr( "Balance" ) ); cbList->setColumnAlignment( colnum, Qt::AlignRight ); } cbList->setAllColumnsShowFocus( TRUE ); cbList->setSorting( posName ); QPEApplication::setStylusOperation( cbList->viewport(), QPEApplication::RightOnHold ); connect( cbList, SIGNAL( rightButtonPressed(QListViewItem*,const QPoint&,int) ), this, SLOT( slotEdit() ) ); setCentralWidget( cbList ); for ( CBInfo *cb = checkbooks->first(); cb; cb = checkbooks->next() ) { addCheckbook( cb ); } } void MainWindow::addCheckbook( CBInfo *cb ) { QListViewItem *lvi = new QListViewItem( cbList ); if ( _cfg.getShowLocks() && !cb->password().isNull() ) { lvi->setPixmap( 0, lockIcon ); } lvi->setText( posName, cb->name() ); if ( _cfg.getShowBalances() ) { QString balance; balance.sprintf( "%.2f", cb->balance() ); balance.prepend( _cfg.getCurrencySymbol() ); lvi->setText( posName + 1, balance ); } } void MainWindow::buildFilename( const QString &name ) { tempFilename = cbDir; tempFilename.append( name ); tempFilename.append( ".qcb" ); } void MainWindow::slotNew() { CBInfo *cb = new CBInfo(); Checkbook *currcb = new Checkbook( this, cb, &_cfg ); if ( QPEApplication::execDialog( currcb ) == QDialog::Accepted ) { // Save new checkbook buildFilename( cb->name() ); _cfg.setLastBook( cb->name() ); cb->setFilename( tempFilename ); cb->write(); // Add to listbox checkbooks->inSort( cb ); addCheckbook( cb ); } delete currcb; } // --- slotEdit --------------------------------------------------------------- void MainWindow::slotEdit() { // get name and open it QListViewItem *curritem = cbList->currentItem(); if ( !curritem ) return; openBook( curritem ); } // --- openBook --------------------------------------------------------------- void MainWindow::openBook(QListViewItem *curritem) { + if ( !curritem ) return; // find book in List QString currname=curritem->text(posName); CBInfo *cb = checkbooks->first(); while ( cb ) { if ( cb->name() == currname ) break; cb = checkbooks->next(); } if ( !cb ) return; // buildFilename( currname ); float currbalance = cb->balance(); bool currlock = !cb->password().isNull(); if ( currlock ) { Password *pw = new Password( this, tr( "Enter password" ), tr( "Please enter your password:" ) ); if ( pw->exec() != QDialog::Accepted || pw->password != cb->password() ) { delete pw; return; } delete pw; } _cfg.setLastBook( currname ); Checkbook *currcb = new Checkbook( this, cb, &_cfg ); if ( QPEApplication::execDialog( currcb ) == QDialog::Accepted ) { QString newname = cb->name(); if ( currname != newname ) { // Update name if changed - if( curritem ) { - curritem->setText( posName, newname ); - cbList->sort(); - } + curritem->setText( posName, newname ); + cbList->sort(); _cfg.setLastBook( newname ); // Remove old file QFile f( tempFilename ); if ( f.exists() ) f.remove(); // Get new filename buildFilename( newname ); cb->setFilename( tempFilename ); } cb->write(); // Update lock if changed if ( _cfg.getShowLocks() && !cb->password().isNull() != currlock ) { if ( !cb->password().isNull() ) curritem->setPixmap( 0, lockIcon ); else curritem->setPixmap( 0, nullIcon ); } // Update balance if changed if ( _cfg.getShowBalances() && cb->balance() != currbalance ) { QString tempstr; tempstr.sprintf( "%.2f", cb->balance() ); tempstr.prepend( _cfg.getCurrencySymbol() ); curritem->setText( posName + 1, tempstr ); } // write config, if needed if( _cfg.isDirty() ) { Config config("checkbook"); _cfg.writeConfig( config ); } } delete currcb; } // --- slotDelete ------------------------------------------------------------- void MainWindow::slotDelete() { QString currname = cbList->currentItem()->text( posName ); if ( QPEMessageBox::confirmDelete ( this, tr( "Delete checkbook" ), currname ) ) { buildFilename( currname ); QFile f( tempFilename ); if ( f.exists() ) { f.remove(); } delete cbList->currentItem(); } } // --- slotConfigure ---------------------------------------------------------- void MainWindow::slotConfigure() { Configuration *cfgdlg = new Configuration( this, _cfg ); if ( QPEApplication::execDialog( cfgdlg ) == QDialog::Accepted ) { // read data from config dialog & save it cfgdlg->saveConfig( _cfg ); writeConfig(); buildList(); } delete cfgdlg; } // --- writeConfig -------------------------------------------------------------- void MainWindow::writeConfig() { Config config("checkbook"); _cfg.writeConfig( config ); } diff --git a/noncore/apps/opie-console/procctl.cpp b/noncore/apps/opie-console/procctl.cpp index a44529b..5239e26 100644 --- a/noncore/apps/opie-console/procctl.cpp +++ b/noncore/apps/opie-console/procctl.cpp @@ -1,97 +1,100 @@ #include <sys/wait.h> #include <fcntl.h> #include <unistd.h> #include "procctl.h" ProcContainer *ProcCtl::m_last = 0; ProcCtl* ProcCtl::m_self = 0; ProcCtl::ProcCtl() { signal( SIGCHLD, signal_handler ); } ProcCtl::~ProcCtl() { } ProcCtl* ProcCtl::self() { if (!m_self ) { m_self = new ProcCtl; } return m_self; } void ProcCtl::add(pid_t pi, int fd ) { ProcContainer * con = new ProcContainer; //memset(con, 0, sizeof(con) ); con->pid = pi; con->fd = fd; con->status = 0; con->prev = m_last; m_last = con; } void ProcCtl::remove( pid_t pi ) { /* * We first check if the last item * is equal to pi the we * */ ProcContainer* con; if (m_last->pid == pi ) { con = m_last; m_last = con->prev; delete con; return; } con = m_last; ProcContainer* forw = 0l; while (con ) { /* remove it */ if ( pi == con->pid ) { - forw->prev = con->prev; + if (forw) + forw->prev = con->prev; + else + forw = con->prev; delete con; return; } forw = con; con = con->prev; } } void ProcCtl::remove( ProcContainer con ) { remove( con.pid ); } int ProcCtl::status(pid_t pid )const{ ProcContainer *con = m_last; while (con) { if (con->pid == pid ) return con->status; con = con->prev; } return -1; } void ProcCtl::signal_handler(int) { int status; signal( SIGCHLD, signal_handler ); pid_t pi = waitpid( -1, &status, WNOHANG ); /* * find the container for pid * */ if ( pi < 0 ) { return; } ProcContainer* con = m_last; while (con) { if ( con->pid == pi ) { con->status = status; char result = 1; /* give a 'signal' */ ::write(con->fd, &result, 1 ); } con = con->prev; } } diff --git a/noncore/apps/tinykate/libkate/document/katedocument.cpp b/noncore/apps/tinykate/libkate/document/katedocument.cpp index b82a86a..692fd46 100644 --- a/noncore/apps/tinykate/libkate/document/katedocument.cpp +++ b/noncore/apps/tinykate/libkate/document/katedocument.cpp @@ -1922,466 +1922,467 @@ void KateDocument::updateLines(int startLine, int endLine, int flags, int cursor if (line > 0) ctxNum = getTextLine(line - 1)->getContext(); do { // kdDebug(13020)<<QString("**************Working on line: %1").arg(line)<<endl; textLine = getTextLine(line); if (textLine==0) kdDebug(13020)<<"****updateLines()>> error textLine==0"<<endl; if (line <= endLine && line != cursorY) { if (flags & KateView::cfRemoveSpaces) textLine->removeSpaces(); updateMaxLength(textLine); } endCtx = textLine->getContext(); // odebug << "DOHIGHLIGHT" << oendl; ctxNum = m_highlight->doHighlight(ctxNum,textLine); textLine->setContext(ctxNum); line++; } while ((buffer->line(line)!=0) && (line <= endLine || endCtx != ctxNum)); // kdDebug(13020)<<"updateLines :: while loop left"<<endl; tagLines(startLine, line - 1); } void KateDocument::updateMaxLength(TextLine::Ptr &textLine) { int len; len = textWidth(textLine,textLine->length()); if (len > maxLength) { longestLine = textLine; maxLength = len; newDocGeometry = true; } else { if (!longestLine || (textLine == longestLine && len <= maxLength*3/4)) { maxLength = -1; for (int i = 0; i < numLines();i++) { textLine = getTextLine(i); len = textWidth(textLine,textLine->length()); if (len > maxLength) { maxLength = len; longestLine = textLine; } } newDocGeometry = true; } } } void KateDocument::slotBufferChanged() { newDocGeometry = true; //updateLines();//JW updateViews(); } void KateDocument::slotBufferHighlight(long start,long stop) { kdDebug(13020)<<"KateDocument::slotBufferHighlight"<<QString("%1-%2").arg(start).arg(stop)<<endl; updateLines(start,stop); // buffer->startLoadTimer(); } void KateDocument::updateViews(KateView *exclude) { KateView *view; int flags; bool markState = hasMarkedText(); flags = (newDocGeometry) ? KateView::ufDocGeometry : 0; for (view = views.first(); view != 0L; view = views.next() ) { if (view != exclude) view->updateView(flags); // notify every view about the changed mark state.... if (oldMarkState != markState) emit view->newMarkStatus(); } oldMarkState = markState; newDocGeometry = false; } QColor &KateDocument::cursorCol(int x, int y) { int attr; Attribute *a; TextLine::Ptr textLine = getTextLine(y); attr = textLine->getRawAttr(x); a = &m_attribs[attr & taAttrMask]; if (attr & taSelected) return a->selCol; else return a->col; } void KateDocument::paintTextLine(QPainter &paint, int line, int xStart, int xEnd, bool showTabs) { paintTextLine (paint, line, 0, xStart, xEnd, showTabs); } void KateDocument::paintTextLine(QPainter &paint, int line, int y, int xStart, int xEnd, bool showTabs) { TextLine::Ptr textLine; int len; const QChar *s; int z, x; QChar ch; - Attribute *a = 0L; + Attribute *attrptr = 0L; int attr, nextAttr; int xs; int xc, zc; if (line > lastLine()) { paint.fillRect(0, y, xEnd - xStart,fontHeight, colors[0]); return; } textLine = getTextLine(line); len = textLine->length(); s = textLine->getText(); // skip to first visible character x = 0; z = 0; do { xc = x; zc = z; if (z == len) break; ch = s[z];//textLine->getChar(z); if (ch == '\t') { x += m_tabWidth - (x % m_tabWidth); } else { - a = &m_attribs[textLine->getAttr(z)]; - - if (a->bold && a->italic) - x += myFontMetricsBI.width(ch); - else if (a->bold) - x += myFontMetricsBold.width(ch); - else if (a->italic) - x += myFontMetricsItalic.width(ch); - else - x += myFontMetrics.width(ch); + attrptr = &m_attribs[textLine->getAttr(z)]; + + if (attrptr->bold && attrptr->italic) + x += myFontMetricsBI.width(ch); + else if (attrptr->bold) + x += myFontMetricsBold.width(ch); + else if (attrptr->italic) + x += myFontMetricsItalic.width(ch); + else + x += myFontMetrics.width(ch); } z++; } while (x <= xStart); // draw background xs = xStart; attr = textLine->getRawAttr(zc); while (x < xEnd) { nextAttr = textLine->getRawAttr(z); if ((nextAttr ^ attr) & taSelected) { if (attr & taSelected) paint.fillRect(xs - xStart, y, x - xs, fontHeight, colors[1]); else paint.fillRect(xs - xStart, y, x - xs, fontHeight, colors[0]); xs = x; attr = nextAttr; } if (z == len) break; ch = s[z];//textLine->getChar(z); if (ch == '\t') x += m_tabWidth - (x % m_tabWidth); else { - a = &m_attribs[textLine->getAttr(z)]; + attrptr = &m_attribs[textLine->getAttr(z)]; - if (a->bold && a->italic) + if (attrptr->bold && attrptr->italic) x += myFontMetricsBI.width(ch); - else if (a->bold) + else if (attrptr->bold) x += myFontMetricsBold.width(ch); - else if (a->italic) + else if (attrptr->italic) x += myFontMetricsItalic.width(ch); else x += myFontMetrics.width(ch); } z++; } if (attr & taSelected) paint.fillRect(xs - xStart, y, xEnd - xs, fontHeight, colors[1]); else paint.fillRect(xs - xStart, y, xEnd - xs, fontHeight, colors[0]); len = z; //reduce length to visible length // draw text x = xc; z = zc; y += fontAscent;// -1; attr = -1; while (z < len) { ch = s[z];//textLine->getChar(z); if (ch == '\t') { if (z > zc) { //this should cause no copy at all QConstString str((QChar *) &s[zc], z - zc /*+1*/); QString s = str.string(); paint.drawText(x - xStart, y, s); - if (a->bold && a->italic) - x += myFontMetricsBI.width(s); - else if (a->bold) - x += myFontMetricsBold.width(s); - else if (a->italic) - x += myFontMetricsItalic.width(s); - else - x += myFontMetrics.width(s); + if (attrptr && attrptr->bold && attrptr->italic) + x += myFontMetricsBI.width(s); + else if (attrptr && attrptr->bold) + x += myFontMetricsBold.width(s); + else if (attrptr && attrptr->italic) + x += myFontMetricsItalic.width(s); + else + x += myFontMetrics.width(s); } zc = z +1; if (showTabs) { nextAttr = textLine->getRawAttr(z); if (nextAttr != attr) { attr = nextAttr; - a = &m_attribs[attr & taAttrMask]; - - if (attr & taSelected) paint.setPen(a->selCol); - else paint.setPen(a->col); - - if (a->bold && a->italic) - paint.setFont(myFontBI); - else if (a->bold) - paint.setFont(myFontBold); - else if (a->italic) - paint.setFont(myFontItalic); - else - paint.setFont(myFont); + attrptr = &m_attribs[attr & taAttrMask]; + + if (attr & taSelected) paint.setPen(attrptr->selCol); + else paint.setPen(attrptr->col); + + if (attrptr->bold && attrptr->italic) + paint.setFont(myFontBI); + else if (attrptr->bold) + paint.setFont(myFontBold); + else if (attrptr->italic) + paint.setFont(myFontItalic); + else + paint.setFont(myFont); } -// paint.drawLine(x - xStart, y -2, x - xStart, y); -// paint.drawLine(x - xStart, y, x - xStart + 2, y); paint.drawPoint(x - xStart, y); paint.drawPoint(x - xStart +1, y); paint.drawPoint(x - xStart, y -1); } x += m_tabWidth - (x % m_tabWidth); } else { nextAttr = textLine->getRawAttr(z); if (nextAttr != attr) { if (z > zc) { QConstString str((QChar *) &s[zc], z - zc /*+1*/); QString s = str.string(); paint.drawText(x - xStart, y, s); - if (a->bold && a->italic) - x += myFontMetricsBI.width(s); - else if (a->bold) - x += myFontMetricsBold.width(s); - else if (a->italic) - x += myFontMetricsItalic.width(s); - else - x += myFontMetrics.width(s); + if (attrptr->bold && attrptr->italic) + x += myFontMetricsBI.width(s); + else if (attrptr->bold) + x += myFontMetricsBold.width(s); + else if (attrptr->italic) + x += myFontMetricsItalic.width(s); + else + x += myFontMetrics.width(s); zc = z; } attr = nextAttr; - a = &m_attribs[attr & taAttrMask]; - - if (attr & taSelected) paint.setPen(a->selCol); - else paint.setPen(a->col); - - if (a->bold && a->italic) - paint.setFont(myFontBI); - else if (a->bold) - paint.setFont(myFontBold); - else if (a->italic) - paint.setFont(myFontItalic); - else - paint.setFont(myFont); + attrptr = &m_attribs[attr & taAttrMask]; + + if (attr & taSelected) paint.setPen(attrptr->selCol); + else paint.setPen(attrptr->col); + + if (attrptr->bold && attrptr->italic) + paint.setFont(myFontBI); + else if (attrptr->bold) + paint.setFont(myFontBold); + else if (attrptr->italic) + paint.setFont(myFontItalic); + else + paint.setFont(myFont); } } z++; } if (z > zc) { QConstString str((QChar *) &s[zc], z - zc /*+1*/); paint.drawText(x - xStart, y, str.string()); } } // Applies the search context, and returns whether a match was found. If one is, // the length of the string matched is also returned. bool KateDocument::doSearch(SConfig &sc, const QString &searchFor) { int line, col; int searchEnd; int bufLen, tlen; QChar *t; TextLine::Ptr textLine; int pos, newPos; if (searchFor.isEmpty()) return false; bufLen = 0; t = 0L; line = sc.cursor.y; col = sc.cursor.x; if (!(sc.flags & KateView::sfBackward)) { //forward search if (sc.flags & KateView::sfSelected) { if (line < selectStart) { line = selectStart; col = 0; } searchEnd = selectEnd; } else searchEnd = lastLine(); while (line <= searchEnd) { textLine = getTextLine(line); tlen = textLine->length(); if (tlen > bufLen) { delete [] t; bufLen = (tlen + 255) & (~255); t = new QChar[bufLen]; - } + } else if (!t) + t = new QChar[bufLen]; + memcpy(t, textLine->getText(), tlen*sizeof(QChar)); if (sc.flags & KateView::sfSelected) { pos = 0; do { pos = textLine->findSelected(pos); newPos = textLine->findUnselected(pos); memset(&t[pos], 0, (newPos - pos)*sizeof(QChar)); pos = newPos; } while (pos < tlen); } QString text(t, tlen); if (sc.flags & KateView::sfWholeWords) { // Until the end of the line... while (col < tlen) { // ...find the next match. col = sc.search(text, col); if (col != -1) { // Is the match delimited correctly? if (((col == 0) || (!m_highlight->isInWord(t[col]))) && ((col + sc.matchedLength == tlen) || (!m_highlight->isInWord(t[col + sc.matchedLength])))) { goto found; } else { // Start again from the next character. col++; } } else { // No match. break; } } } else { // Non-whole-word search. col = sc.search(text, col); if (col != -1) goto found; } col = 0; line++; } } else { // backward search if (sc.flags & KateView::sfSelected) { if (line > selectEnd) { line = selectEnd; col = -1; } searchEnd = selectStart; } else searchEnd = 0; while (line >= searchEnd) { textLine = getTextLine(line); tlen = textLine->length(); if (tlen > bufLen) { delete [] t; bufLen = (tlen + 255) & (~255); t = new QChar[bufLen]; - } + } else if (!t) + t = new QChar[bufLen]; memcpy(t, textLine->getText(), tlen*sizeof(QChar)); if (sc.flags & KateView::sfSelected) { pos = 0; do { pos = textLine->findSelected(pos); newPos = textLine->findUnselected(pos); memset(&t[pos], 0, (newPos - pos)*sizeof(QChar)); pos = newPos; } while (pos < tlen); } if (col < 0 || col > tlen) col = tlen; QString text(t, tlen); if (sc.flags & KateView::sfWholeWords) { // Until the beginning of the line... while (col >= 0) { // ...find the next match. col = sc.search(text, col); if (col != -1) { // Is the match delimited correctly? if (((col == 0) || (!m_highlight->isInWord(t[col]))) && ((col + sc.matchedLength == tlen) || (!m_highlight->isInWord(t[col + sc.matchedLength])))) { goto found; } else { // Start again from the previous character. col--; } } else { // No match. break; } } } else { // Non-whole-word search. col = sc.search(text, col); if (col != -1) goto found; } col = -1; line--; } } sc.flags |= KateView::sfWrapped; return false; found: if (sc.flags & KateView::sfWrapped) { if ((line > sc.startCursor.y || (line == sc.startCursor.y && col >= sc.startCursor.x)) ^ ((sc.flags & KateView::sfBackward) != 0)) return false; } sc.cursor.x = col; sc.cursor.y = line; return true; } void KateDocument::tagLine(int line) { if (tagStart > line) tagStart = line; if (tagEnd < line) tagEnd = line; } void KateDocument::insLine(int line) { KateView *view; if (selectStart >= line) selectStart++; if (selectEnd >= line) selectEnd++; if (tagStart >= line) tagStart++; if (tagEnd >= line) tagEnd++; newDocGeometry = true; for (view = views.first(); view != 0L; view = views.next() ) { view->insLine(line); } } void KateDocument::delLine(int line) { KateView *view; if (selectStart >= line && selectStart > 0) selectStart--; if (selectEnd >= line) selectEnd--; if (tagStart >= line && tagStart > 0) tagStart--; if (tagEnd >= line) tagEnd--; newDocGeometry = true; for (view = views.first(); view != 0L; view = views.next() ) { view->delLine(line); } } void KateDocument::optimizeSelection() { TextLine::Ptr textLine; while (selectStart <= selectEnd) { diff --git a/noncore/settings/sysinfo/devicesinfo.cpp b/noncore/settings/sysinfo/devicesinfo.cpp index 164d608..428cfd4 100644 --- a/noncore/settings/sysinfo/devicesinfo.cpp +++ b/noncore/settings/sysinfo/devicesinfo.cpp @@ -172,193 +172,193 @@ void CpuCategory::populate() //================================================================================================= InputCategory::InputCategory( DevicesView* parent ) :Category( parent, "2. Input Subsystem" ) { } InputCategory::~InputCategory() { } void InputCategory::populate() { odebug << "InputCategory::populate()" << oendl; OInputSystem* sys = OInputSystem::instance(); OInputSystem::DeviceIterator it = sys->iterator(); while ( it.current() ) { InputDevice* dev = new InputDevice( this, it.current()->identity() ); dev->setInfo( it.current() ); ++it; } } //================================================================================================= CardsCategory::CardsCategory( DevicesView* parent ) :Category( parent, "3. Removable Cards" ) { } CardsCategory::~CardsCategory() { } void CardsCategory::populate() { odebug << "CardsCategory::populate()" << oendl; OPcmciaSystem* sys = OPcmciaSystem::instance(); OPcmciaSystem::CardIterator it = sys->iterator(); while ( it.current() ) { CardDevice *dev = new CardDevice( this, it.current()->identity() ); dev->setInfo( it.current() ); ++it; } } //================================================================================================= UsbCategory::UsbCategory( DevicesView* parent ) :Category( parent, "4. Universal Serial Bus" ) { } UsbCategory::~UsbCategory() { } void UsbCategory::populate() { odebug << "UsbCategory::populate()" << oendl; QFile usbinfofile( "/proc/bus/usb/devices" ); if ( !usbinfofile.exists() || !usbinfofile.open( IO_ReadOnly ) ) { new UsbDevice( this, "(no USB found)" ); return; } QTextStream usbinfo( &usbinfofile ); int _bus, _level, _parent, _port, _count, _device, _channels, _power; float _speed; QString _manufacturer, _product, _serial; int usbcount = 0; UsbDevice* lastDev = 0; UsbDevice* dev = 0; while ( !usbinfo.atEnd() ) { QString line = usbinfo.readLine(); odebug << "got line '" << line << "'" << oendl; if ( line.startsWith( "T:" ) ) { sscanf(line.local8Bit().data(), "T: Bus=%2d Lev=%2d Prnt=%2d Port=%d Cnt=%2d Dev#=%3d Spd=%3f MxCh=%2d", &_bus, &_level, &_parent, &_port, &_count, &_device, &_speed, &_channels); if ( !_level ) { odebug << "adding new bus" << oendl; dev = new UsbDevice( this, QString( "Generic USB Hub Device" ) ); lastDev = dev; } else { odebug << "adding new dev" << oendl; dev = new UsbDevice( lastDev, QString( "Generic USB Hub Device" ) ); lastDev = dev; } } - else if ( line.startsWith( "S: Product" ) ) + else if ( dev && line.startsWith( "S: Product" ) ) { int dp = line.find( '=' ); dev->setText( 0, dp != -1 ? line.right( line.length()-1-dp ) : "<unknown>" ); } else { continue; } } } //================================================================================================= Device::Device( Category* parent, const QString& name ) :OListViewItem( parent, name ) { devinfo = static_cast<QWidget*>( listView()->parent() ); } Device::Device( Device* parent, const QString& name ) :OListViewItem( parent, name ) { devinfo = static_cast<QWidget*>( listView()->parent() ); } Device::~Device() { } QWidget* Device::detailsWidget() { return details; } //================================================================================================= CpuDevice::CpuDevice( Category* parent, const QString& name ) :Device( parent, name ) { OListView* w = new OListView( devinfo ); details = w; w->addColumn( "Info" ); w->addColumn( "Value" ); w->hide(); } CpuDevice::~CpuDevice() { } void CpuDevice::addInfo( const QString& info ) { int dp = info.find( ':' ); if ( dp != -1 ) { new OListViewItem( (OListView*) details, info.left( dp ), info.right( info.length()-dp ) ); } } //================================================================================================= CardDevice::CardDevice( Category* parent, const QString& name ) :Device( parent, name ) { OListView* w = new OListView( devinfo ); details = w; w->addColumn( "Info" ); w->addColumn( "Value" ); w->hide(); } void CardDevice::setInfo( const OPcmciaSocket* card ) { QStringList vendorlst = card->productIdentityVector(); for( QStringList::Iterator it = vendorlst.begin(); it != vendorlst.end(); ++it ) { new OListViewItem( (OListView*) details, "VendorID", *it ); } new OListViewItem( (OListView*) details, "Manufacturer", card->manufacturerIdentity() ); new OListViewItem( (OListView*) details, "Function", card->function() ); QStringList text; OPcmciaSocket::OPcmciaSocketCardStatus status = card->status(); if ( status ) { if ( status & OPcmciaSocket::Occupied ) text += "Occupied"; if ( status & OPcmciaSocket::OccupiedCardBus ) text += "CardBus"; if ( status & OPcmciaSocket::WriteProtected ) text += "WriteProtected"; if ( status & OPcmciaSocket::BatteryLow ) text += "BatteryLow"; if ( status & OPcmciaSocket::BatteryDead ) text += "BatteryDead"; if ( status & OPcmciaSocket::Ready ) text += "Ready"; if ( status & OPcmciaSocket::Suspended ) text += "Suspended"; if ( status & OPcmciaSocket::Attention ) text += "Attention"; if ( status & OPcmciaSocket::InsertionInProgress ) text += "InsertionInProgress"; if ( status & OPcmciaSocket::RemovalInProgress ) text += "RemovalInProgress"; if ( status & OPcmciaSocket::ThreeVolts ) text += "3V"; if ( status & OPcmciaSocket::SupportsVoltage ) text += "SupportsVoltage"; diff --git a/noncore/todayplugins/stockticker/libstocks/http.c b/noncore/todayplugins/stockticker/libstocks/http.c index 2f38f8a..cc78ab7 100644 --- a/noncore/todayplugins/stockticker/libstocks/http.c +++ b/noncore/todayplugins/stockticker/libstocks/http.c @@ -117,187 +117,187 @@ libstocks_return_code http_get(char *http_file, char *http_server, char **pdata) #elif __WINDOWS__ closesocket(s); #endif return ERRCONN; } /* create header */ if (http_proxy_server) { sprintf(header,"GET http://%.128s:80%.256s HTTP/1.0\015\012\015\012", http_server, http_file); } else { sprintf(header,"GET %s HTTP/1.0\015\012\015\012",http_file); } hlg=strlen(header); /* send header */ #ifdef __UNIX__ if (write(s,header,hlg)!=hlg) #elif __WINDOWS__ if (send(s,header,hlg, 0)!=hlg) #endif { #ifdef DEBUG printf(" send header : NOK\n"); #endif return ERRWHEA; } data_lgr = 0; r=1; while(r) { /* Clear Buffer */ memset(buf,0,BUF_SIZE+1); #ifdef __UNIX__ r=read(s,buf,BUF_SIZE); #elif __WINDOWS__ r=recv(s,buf,BUF_SIZE,0); #endif if (r) { if(!data_lgr) { if((data = malloc(r+1))==NULL) { fprintf(stderr,"Memory allocating error (%s line %d)\n" ,__FILE__, __LINE__); exit(1); } memcpy(data,buf,r); data_lgr = r; data[r]=0; } else { if((temp = malloc(r+data_lgr+1))==NULL) { fprintf(stderr,"Memory allocating error (%s line %d)\n" ,__FILE__, __LINE__); exit(1); } memcpy(temp, data, data_lgr); memcpy(temp+data_lgr, buf, r); temp[r+data_lgr]=0; data_lgr += r; free(data); data = temp; } } } /* close socket */ #ifdef __UNIX__ close(s); #elif __WINDOWS__ closesocket(s); #endif #ifdef DEBUG printf("%s\n", data); #endif /* get headers to test status line */ /* and to split headers and content */ temp = data; header_founded = 0; while( !header_founded ) { - if (*temp==0) return ERRRHEA; + if (!temp || *temp==0) return ERRRHEA; if( *temp==0x0A ) { /* test if it is the header end */ temp ++; if (*temp == 0x0D) temp++; if (*temp == 0x0A) header_founded = 1; } else temp++; } *temp = 0; temp++; sscanf(data,"HTTP/1.%*d %03d",&error_code); if (error_code != 200) { #ifdef DEBUG printf(" HTTP error code : %d\n", error_code); #endif free(data); return ERRPAHD; } if ((csv_ptr = malloc(strlen(temp)+1))==NULL) { free(data); fprintf(stderr,"Memory allocating error (%s line %d)\n" ,__FILE__, __LINE__); exit(1); } memcpy(csv_ptr, temp, strlen(temp)+1); free(data); #ifdef DEBUG printf(" CSV\n"); printf("%s,\n", csv_ptr); #endif *pdata = csv_ptr; return 0; } /******************************************************************************/ /* Set the proxy server to use */ /******************************************************************************/ libstocks_return_code set_proxy(char *proxy) { char *ptr; char c; #ifdef DEBUG printf("*set_proxy\n"); #endif /* Parse the proxy URL - It must start with http:// */ #ifdef __UNIX__ if (strncasecmp("http://",proxy,7)) return ERRPROX; #elif __WINDOWS__ if (_mbsnbicmp("http://",proxy,7)) return ERRPROX; #endif proxy+=7; /* find ":" in the proxy url */ ptr = proxy; for (c=*ptr; (c && c!=':');) c=*ptr++; /* ptr points just after the ":" or at the end of proxy if : not founded */ *(ptr-1)=0; /* clear the ":" */ http_proxy_server=strdup(proxy); #ifdef DEBUG printf("http_proxy_server : %s\n", http_proxy_server); #endif /* get the port number of the url */ if (sscanf(ptr,"%d",&http_proxy_port)!=1) return ERRPROX; #ifdef DEBUG printf("http_proxy_port : %d\n", http_proxy_port); #endif return 0; } |