1 files changed, 3 insertions, 3 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index 67cae1c..e57cdef 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -551,197 +551,197 @@ int ODevice::readLightSensor()
 */
 int ODevice::lightSensorResolution() const
 {
     return 0;
 }
 
 /**
 * @return if the device has a hinge sensor
 */
 bool ODevice::hasHingeSensor() const
 {
     return false;
 }
 
 /**
 * @return a value from the hinge sensor
 */
 OHingeStatus ODevice::readHingeSensor()
 {
     return CASE_UNKNOWN;
 }
 
 /**
 * @return a list with CPU frequencies supported by the hardware
 */
 const QStrList &ODevice::allowedCpuFrequencies() const
 {
     return *d->m_cpu_frequencies;
 }
 
 
 /**
 * Set desired CPU frequency
 *
 * @param index index into d->m_cpu_frequencies of the frequency to be set
 */
 bool ODevice::setCurrentCpuFrequency(uint index)
 {
     if (index >= d->m_cpu_frequencies->count())
         return false;
 
     char *freq = d->m_cpu_frequencies->at(index);
     qWarning("set freq to %s", freq);
 
     int fd;
 
     if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
         char writeCommand[50];
         const int count = sprintf(writeCommand, "%s\n", freq);
         int res = (::write(fd, writeCommand, count) != -1);
         ::close(fd);
         return res;
     }
 
     return false;
 }
 
 
 /**
 * @return a list of hardware buttons
 */
 const QValueList <ODeviceButton> &ODevice::buttons()
 {
     initButtons();
 
     return *d->m_buttons;
 }
 
 /**
 * @return The amount of time that would count as a hold
 */
 uint ODevice::buttonHoldTime() const
 {
     return d->m_holdtime;
 }
 
 /**
 * This method return a ODeviceButton for a key code
 * or 0 if no special hardware button is available for the device
 *
 * @return The devicebutton or 0l
 * @see ODeviceButton
 */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
     initButtons();
 
     for ( QValueListConstIterator<ODeviceButton> it = d->m_buttons->begin(); it != d->m_buttons->end(); ++it ) {
         if ( (*it). keycode() == code )
             return &(*it);
     }
     return 0;
 }
 
 void ODevice::reloadButtonMapping()
 {
-    initButtons();
+    if(!d->m_buttons)
+        initButtons();
     
     if(!d->m_initializedButtonQcop) {
-        QCopChannel *chan = new QCopChannel("QPE/System", this, "ODevice button channel");
-        connect(chan,SIGNAL(received(const QCString&,const QByteArray&)),
+        connect(qApp,SIGNAL(systemMessageSignal(const QCString&,const QByteArray&)),
                 this,SLOT(systemMessage(const QCString&,const QByteArray&)));
         d->m_initializedButtonQcop = true;
     }
 
     Config cfg ( "ButtonSettings" );
 
     for ( uint i = 0; i < d->m_buttons->count(); i++ ) {
         ODeviceButton &b = ( *d->m_buttons ) [i];
         QString group = "Button" + QString::number ( i );
 
         QCString pch, hch;
         QCString pm, hm;
         QByteArray pdata, hdata;
 
         if ( cfg. hasGroup ( group )) {
             cfg. setGroup ( group );
             pch = cfg. readEntry ( "PressedActionChannel" ). latin1();
             pm  = cfg. readEntry ( "PressedActionMessage" ). latin1();
             // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
             hch = cfg. readEntry ( "HeldActionChannel" ). latin1();
             hm  = cfg. readEntry ( "HeldActionMessage" ). latin1();
             // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
         }
 
         b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
         b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
     }
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
     initButtons();
 
     QString mb_chan;
 
     if ( button >= (int) d->m_buttons->count())
         return;
 
     ODeviceButton &b = ( *d->m_buttons ) [button];
         b. setPressedAction ( action );
 
     mb_chan=b. pressedAction(). channel();
 
     Config buttonFile ( "ButtonSettings" );
     buttonFile. setGroup ( "Button" + QString::number ( button ));
     buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
     buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction(). message());
 
 //  buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction(). data()));
 
     QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
     initButtons();
 
     if ( button >= (int) d->m_buttons->count())
         return;
 
     ODeviceButton &b = ( *d->m_buttons ) [button];
         b. setHeldAction ( action );
 
     Config buttonFile ( "ButtonSettings" );
     buttonFile. setGroup ( "Button" + QString::number ( button ));
     buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction(). channel());
     buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction(). message());
 
 //  buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction(). data()));
 
     QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 /**
  * @internal
  */
 void ODevice::virtual_hook(int, void* ){
 
 }
 
 /**
  * \brief Send a QCOP Message before suspending
  *
  * Sends a QCOP message to channel QPE/System
  * with the message "aboutToSuspend()" if this
  * is the windowing server.
  * 
  * Call this in your custom \sa suspend() Method
  * before going to suspend.
  * 
  */
 void ODevice::sendSuspendmsg()
 {
     if ( isQWS() )