summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--noncore/net/networksetup/interfaces/interface.cpp4
-rw-r--r--noncore/net/networksetup/mainwindowimp.cpp10
-rw-r--r--noncore/net/networksetup/wlan/wlanimp.cpp8
-rw-r--r--noncore/settings/networksettings/interfaces/interface.cpp4
-rw-r--r--noncore/settings/networksettings/mainwindowimp.cpp10
-rw-r--r--noncore/settings/networksettings/wlan/wlanimp.cpp8
6 files changed, 18 insertions, 26 deletions
diff --git a/noncore/net/networksetup/interfaces/interface.cpp b/noncore/net/networksetup/interfaces/interface.cpp
index 7ffa76f..d964961 100644
--- a/noncore/net/networksetup/interfaces/interface.cpp
+++ b/noncore/net/networksetup/interfaces/interface.cpp
@@ -1,191 +1,191 @@
#include "interface.h"
#include <qdatetime.h>
#include <qfile.h>
#include <qdir.h>
#include <qfileinfo.h>
#include <qtextstream.h>
#define IFCONFIG "/sbin/ifconfig"
#define DHCP_INFO_DIR "/etc/dhcpc"
#include <stdio.h>
#include <stdlib.h>
Interface::Interface(QObject * parent, const char * name, bool newSatus): QObject(parent, name), hardwareName("Unknown"), moduleOwner(NULL), status(newSatus), attached(false), dhcp(false), macAddress(""), ip("0.0.0.0"), broadcast(""), subnetMask("0.0.0.0"){
refresh();
}
/**
* Set status
* @param newStatus - the new status
* emit updateInterface
*/
void Interface::setStatus(bool newStatus){
if(status != newStatus){
status = newStatus;
refresh();
}
};
/**
* Set if attached or not (802.11 card pulled out for example)
* @param isAttached - if attached
* emit updateInterface
*/
void Interface::setAttached(bool isAttached){
attached = isAttached;
emit(updateInterface(this));
};
/**
* Set Hardware name
* @param name - the new name
* emit updateInterface
*/
void Interface::setHardwareName(const QString &name){
hardwareName = name;
emit(updateInterface(this));
};
/**
* Set Module owner
* @param owner - the new owner
* emit updateInterface
*/
void Interface::setModuleOwner(Module *owner){
moduleOwner = owner;
emit(updateInterface(this));
};
/**
* Try to start the interface.
*/
void Interface::start(){
// check to see if we are already running.
if(true == status){
emit (updateMessage("Unable to start interface,\n already started"));
return;
}
int ret = system(QString("%1 %2 up").arg(IFCONFIG).arg(this->name()).latin1());
// See if it was successfull...
if(ret != 0){
- emit (updateMessage("Starting interface failed."));
+ emit (updateMessage("Starting interface failed"));
return;
}
status = true;
refresh();
emit (updateMessage("Start successfull"));
}
/**
* Try to stop the interface.
*/
void Interface::stop(){
// check to see if we are already stopped.
if(false == status){
emit (updateMessage("Unable to stop interface,\n already stopped"));
return;
}
int ret = system(QString("%1 %2 down").arg(IFCONFIG).arg(this->name()).latin1());
if(ret != 0){
- emit (updateMessage("Stopping interface failed."));
+ emit (updateMessage("Stopping interface failed"));
return;
}
status = false;
refresh();
emit (updateMessage("Stop successfull"));
}
/**
* Try to restart the interface.
*/
void Interface::restart(){
stop();
start();
}
/**
* Try to refresh the information about the interface.
* First call ifconfig, then check the dhcp-info file
* @return bool true if successfull.
*/
bool Interface::refresh(){
// See if we are up.
if(status == false){
macAddress = "";
ip = "0.0.0.0";
subnetMask = "0.0.0.0";
broadcast = "";
dhcp = false;
dhcpServerIp = "";
leaseObtained = "";
leaseExpires = "";
emit(updateInterface(this));
return true;
}
QString fileName = QString("/tmp/%1_ifconfig_info").arg(this->name());
int ret = system(QString("%1 %2 > %3").arg(IFCONFIG).arg(this->name()).arg(fileName).latin1());
if(ret != 0){
qDebug(QString("Interface: Ifconfig return value: %1, is not 0").arg(ret).latin1());
return false;
}
QFile file(fileName);
if (!file.open(IO_ReadOnly)){
qDebug(QString("Interface: Can't open file: %1").arg(fileName).latin1());
return false;
}
// Set to the defaults
macAddress = "";
ip = "0.0.0.0";
subnetMask = "0.0.0.0";
broadcast = "";
QTextStream stream( &file );
QString line;
while ( !stream.eof() ) {
line = stream.readLine();
if(line.contains("HWaddr")){
int mac = line.find("HWaddr");
macAddress = line.mid(mac+7, line.length());
}
if(line.contains("inet addr")){
int ipl = line.find("inet addr");
int space = line.find(" ", ipl+10);
ip = line.mid(ipl+10, space-ipl-10);
}
if(line.contains("Mask")){
int mask = line.find("Mask");
subnetMask = line.mid(mask+5, line.length());
}
if(line.contains("Bcast")){
int mask = line.find("Bcast");
int space = line.find(" ", mask+6);
broadcast = line.mid(mask+6, space-mask-6);
}
}
file.close();
QFile::remove(fileName);
// DHCP TESTING
// reset DHCP info
dhcpServerIp = "";
leaseObtained = "";
leaseExpires = "";
dhcp = false;
QString dhcpDirectory(DHCP_INFO_DIR);
QDir d(dhcpDirectory);
if(!d.exists(dhcpDirectory))
dhcpDirectory = "/var/run";
// See if we have
QString dhcpFile(QString(dhcpDirectory+"/dhcpcd-%1.info").arg(this->name()));
// If there is no DHCP information then exit now with no errors.
diff --git a/noncore/net/networksetup/mainwindowimp.cpp b/noncore/net/networksetup/mainwindowimp.cpp
index 7b93554..9a17743 100644
--- a/noncore/net/networksetup/mainwindowimp.cpp
+++ b/noncore/net/networksetup/mainwindowimp.cpp
@@ -227,284 +227,280 @@ Module* MainWindowImp::loadPlugin(const QString &pluginFileName, const QString &
// Try to get an object.
Module *object = ((Module* (*)()) functionPointer)();
if(object == NULL){
qDebug("MainWindowImp: Couldn't create object, but did load library!");
delete lib;
return NULL;
}
// Store for deletion later
libraries.insert(object, lib);
return object;
}
/**
* The Add button was clicked. Bring up the add dialog and if OK is hit
* load the plugin and append it to the list
*/
void MainWindowImp::addClicked(){
QMap<Module*, QLibrary*>::Iterator it;
QMap<QString, QString> list;
QMap<QString, Module*> newInterfaceOwners;
//list.insert("USB (PPP) / (ADD_TEST)", "A dialup connection over the USB port");
//list.insert("IrDa (PPP) / (ADD_TEST)", "A dialup connection over the IdDa port");
for( it = libraries.begin(); it != libraries.end(); ++it ){
if(it.key()){
(it.key())->possibleNewInterfaces(list);
}
}
// See if the list has anything that we can add.
if(list.count() == 0){
QMessageBox::information(this, "Sorry", "Nothing to add.", QMessageBox::Ok);
return;
}
AddConnectionImp addNewConnection(this, "AddConnectionImp", true);
addNewConnection.addConnections(list);
addNewConnection.showMaximized();
if(QDialog::Accepted == addNewConnection.exec()){
QListViewItem *item = addNewConnection.registeredServicesList->currentItem();
if(!item)
return;
for( it = libraries.begin(); it != libraries.end(); ++it ){
if(it.key()){
Interface *i = (it.key())->addNewInterface(item->text(0));
if(i){
interfaceNames.insert(i->getInterfaceName(), i);
updateInterface(i);
}
}
}
}
}
/**
* Prompt the user to see if they really want to do this.
* If they do then remove from the list and unload.
*/
void MainWindowImp::removeClicked(){
QListViewItem *item = connectionList->currentItem();
if(!item) {
QMessageBox::information(this, "Sorry","Please select an interface First.", QMessageBox::Ok);
return;
}
Interface *i = interfaceItems[item];
if(i->getModuleOwner() == NULL){
QMessageBox::information(this, "Can't remove interface.", "Interface is built in.", QMessageBox::Ok);
}
else{
if(!i->getModuleOwner()->remove(i))
QMessageBox::information(this, "Error", "Unable to remove.", QMessageBox::Ok);
else{
QMessageBox::information(this, "Success", "Interface was removed.", QMessageBox::Ok);
// TODO memory managment....
// who deletes the interface?
}
}
}
/**
* Pull up the configure about the currently selected interface.
* Report an error if no interface is selected.
* If the interface has a module owner then request its configure.
*/
void MainWindowImp::configureClicked(){
QListViewItem *item = connectionList->currentItem();
if(!item){
QMessageBox::information(this, "Sorry","Please select an interface first.", QMessageBox::Ok);
return;
}
Interface *i = interfaceItems[item];
if(i->getModuleOwner()){
QWidget *moduleConfigure = i->getModuleOwner()->configure(i);
if(moduleConfigure != NULL){
moduleConfigure->showMaximized();
- moduleConfigure->show();
return;
}
}
InterfaceSetupImpDialog *configure = new InterfaceSetupImpDialog(0, "InterfaceSetupImp", i, true, Qt::WDestructiveClose);
QString currentProfileText = currentProfileLabel->text();
if(currentProfileText.upper() == "ALL");
currentProfileText = "";
configure->setProfile(currentProfileText);
configure->showMaximized();
- configure->show();
}
/**
* Pull up the information about the currently selected interface.
* Report an error if no interface is selected.
* If the interface has a module owner then request its configure.
*/
void MainWindowImp::informationClicked(){
QListViewItem *item = connectionList->currentItem();
if(!item){
QMessageBox::information(this, "Sorry","Please select an interface First.", QMessageBox::Ok);
return;
}
Interface *i = interfaceItems[item];
if(!i->isAttached()){
QMessageBox::information(this, "Sorry","No information about\na disconnected interface.", QMessageBox::Ok);
return;
}
if(i->getModuleOwner()){
QWidget *moduleInformation = i->getModuleOwner()->information(i);
if(moduleInformation != NULL){
moduleInformation->showMaximized();
- moduleInformation->show();
return;
}
}
- InterfaceInformationImp *information = new InterfaceInformationImp(0, "InterfaceSetupImp", i, true);
- information->showMaximized();
- information->show();
+ InterfaceInformationImp information(0, "InterfaceSetupImp", i);
+ information.showMaximized();
}
/**
* Update this interface. If no QListViewItem exists create one.
* @param Interface* pointer to the interface that needs to be updated.
*/
void MainWindowImp::updateInterface(Interface *i){
if(!advancedUserMode){
if(i->getInterfaceName() == "lo")
return;
}
QListViewItem *item = NULL;
// Find the interface, making it if needed.
if(items.find(i) == items.end()){
item = new QListViewItem(connectionList, "", "", "");
// See if you can't find a module owner for this interface
QMap<Module*, QLibrary*>::Iterator it;
for( it = libraries.begin(); it != libraries.end(); ++it ){
if(it.key()->isOwner(i))
i->setModuleOwner(it.key());
}
items.insert(i, item);
interfaceItems.insert(item, i);
}
else
item = items[i];
// Update the icons and information
item->setPixmap(0, (Resource::loadPixmap(i->getStatus() ? "up": "down")));
QString typeName = "lan";
if(i->getHardwareName().contains("Local Loopback"))
typeName = "lo";
if(i->getInterfaceName().contains("irda"))
typeName = "irda";
if(i->getInterfaceName().contains("wlan"))
typeName = "wlan";
if(i->getInterfaceName().contains("usb"))
typeName = "usb";
if(!i->isAttached())
typeName = "connect_no";
// Actually try to use the Module
if(i->getModuleOwner() != NULL)
typeName = i->getModuleOwner()->getPixmapName(i);
- item->setPixmap(1, (Resource::loadPixmap(typeName)));
+ item->setPixmap(1, (Resource::loadPixmap(QString("networksetup/") + typeName)));
item->setText(2, i->getHardwareName());
item->setText(3, QString("(%1)").arg(i->getInterfaceName()));
item->setText(4, (i->getStatus()) ? i->getIp() : QString(""));
}
void MainWindowImp::newProfileChanged(const QString& newText){
if(newText.length() > 0)
newProfileButton->setEnabled(true);
else
newProfileButton->setEnabled(false);
}
/**
* Adds a new profile to the list of profiles.
* Don't add profiles that already exists.
* Appends to the list and QStringList
*/
void MainWindowImp::addProfile(){
QString newProfileName = newProfile->text();
if(profiles.grep(newProfileName).count() > 0){
QMessageBox::information(this, "Can't Add","Profile already exists.", QMessageBox::Ok);
return;
}
profiles.append(newProfileName);
profilesList->insertItem(newProfileName);
}
/**
* Removes the currently selected profile in the combo.
* Doesn't delete if there are less then 2 profiles.
*/
void MainWindowImp::removeProfile(){
if(profilesList->count() <= 1){
QMessageBox::information(this, "Can't remove.","At least one profile\nis needed.", QMessageBox::Ok);
return;
}
QString profileToRemove = profilesList->currentText();
if(profileToRemove == "All"){
QMessageBox::information(this, "Can't remove.","Can't remove default.", QMessageBox::Ok);
return;
}
// Can't remove the curent profile
if(profileToRemove == currentProfileLabel->text()){
QMessageBox::information(this, "Can't remove.",QString("%1 is the current profile.").arg(profileToRemove), QMessageBox::Ok);
return;
}
if(QMessageBox::information(this, "Question",QString("Remove profile: %1").arg(profileToRemove), QMessageBox::Ok, QMessageBox::Cancel) == QMessageBox::Ok){
profiles = QStringList::split(" ", profiles.join(" ").replace(QRegExp(profileToRemove), ""));
profilesList->clear();
for ( QStringList::Iterator it = profiles.begin(); it != profiles.end(); ++it)
profilesList->insertItem((*it));
// Remove any interface settings and mappings.
Interfaces interfaces;
// Go through them one by one
QMap<Interface*, QListViewItem*>::Iterator it;
for( it = items.begin(); it != items.end(); ++it ){
QString interfaceName = it.key()->getInterfaceName();
qDebug(interfaceName.latin1());
if(interfaces.setInterface(interfaceName + "_" + profileToRemove)){
interfaces.removeInterface();
if(interfaces.setMapping(interfaceName)){
if(profilesList->count() == 1)
interfaces.removeMapping();
else{
interfaces.removeMap("map", interfaceName + "_" + profileToRemove);
}
}
interfaces.write();
break;
}
}
}
}
/**
* A new profile has been selected, change.
* @param newProfile the new profile.
*/
void MainWindowImp::changeProfile(){
if(profilesList->currentItem() == -1){
QMessageBox::information(this, "Can't Change.","Please select a profile.", QMessageBox::Ok);
return;
}
QString newProfile = profilesList->text(profilesList->currentItem());
if(newProfile != currentProfileLabel->text()){
currentProfileLabel->setText(newProfile);
QFile::remove(scheme);
QFile file(scheme);
if ( file.open(IO_ReadWrite) ) {
QTextStream stream( &file );
stream << QString("SCHEME=%1").arg(newProfile);
file.close();
}
diff --git a/noncore/net/networksetup/wlan/wlanimp.cpp b/noncore/net/networksetup/wlan/wlanimp.cpp
index cc18fba..648932f 100644
--- a/noncore/net/networksetup/wlan/wlanimp.cpp
+++ b/noncore/net/networksetup/wlan/wlanimp.cpp
@@ -6,199 +6,199 @@
#include <qtextstream.h>
#include <qmessagebox.h>
#include <qlineedit.h>
#include <qlabel.h>
#include <qspinbox.h>
#include <qradiobutton.h>
#include <qcheckbox.h>
#include <qtabwidget.h>
#include <qcombobox.h>
/* system() */
#include <stdlib.h>
#define WIRELESS_OPTS "/etc/pcmcia/wireless.opts"
/**
* Constructor, read in the wireless.opts file for parsing later.
*/
WLANImp::WLANImp( QWidget* parent, const char* name, Interface *i, bool modal, WFlags fl):WLAN(parent, name, modal, fl), currentProfile("*") {
interfaceSetup = new InterfaceSetupImp(tabWidget, "InterfaceSetupImp", i);
tabWidget->insertTab(interfaceSetup, "TCP/IP");
// Read in the config file.
QString wlanFile = WIRELESS_OPTS;
QFile file(wlanFile);
if (file.open(IO_ReadOnly)){
QTextStream stream( &file );
QString line = "";
while ( !stream.eof() ) {
line += stream.readLine();
line += "\n";
}
file.close();
settingsFileText = QStringList::split("\n", line, true);
parseSettingFile();
}
else
qDebug(QString("WLANImp: Can't open file: %1 for reading.").arg(wlanFile).latin1());
connect(networkType, SIGNAL(activated(int)), this, SLOT(typeChanged(int)));
}
void WLANImp::typeChanged(int mod){
networkChannel->setEnabled(mod);
channelLabel->setEnabled(mod);
}
/**
* Change the profile for both wireless settings and network settings.
*/
void WLANImp::setProfile(const QString &profile){
interfaceSetup->setProfile(profile);
parseSettingFile();
}
/**
* Parses the settings file that was read in and gets any setting from it.
*/
void WLANImp::parseSettingFile(){
bool foundCase = false;
bool found = false;
for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
QString line = (*it).simplifyWhiteSpace();
if(line.contains("case"))
foundCase = true;
// See if we found our scheme to write or the sceme couldn't be found
if((foundCase && line.contains("esac")) ||
(foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#'))
found = true;
if(line.contains(";;"))
found = false;
if(found){
// write out scheme
if(line.contains("ESSID=")){
QString id = line.mid(line.find("ESSID=")+6, line.length());
if(id == "any"){
essAny->setChecked(false);
}else{
essAny->setChecked(true);
essSpecificLineEdit->setText(id);
}
}
if(line.contains("MODE=")){
QString mode = line.mid(line.find("MODE=")+5, line.length());
if(mode == "Managed"){
networkType->setCurrentItem(0);
channelLabel->setEnabled(false);
networkChannel->setEnabled(false);
}
else{
networkType->setCurrentItem(1);
networkChannel->setEnabled(true);
channelLabel->setEnabled(true);
}
}
if(line.contains("#KEY0="))
- keyLineEdit0->setText(line.mid(5, line.length()));
+ keyLineEdit0->setText(line.mid(6, line.length()));
if(line.contains("#KEY1="))
- keyLineEdit1->setText(line.mid(5, line.length()));
+ keyLineEdit1->setText(line.mid(6, line.length()));
if(line.contains("#KEY2="))
- keyLineEdit2->setText(line.mid(5, line.length()));
+ keyLineEdit2->setText(line.mid(6, line.length()));
if(line.contains("#KEY3="))
- keyLineEdit3->setText(line.mid(5, line.length()));
+ keyLineEdit3->setText(line.mid(6, line.length()));
if(line.contains("KEY=")){
wepEnabled->setChecked(true);
QString key;
if(line.right(5) == (" open")){
key = line.mid(4, line.length()-5);
authOpen->setChecked(true);
authShared->setChecked(false);
}
else{
authOpen->setChecked(false);
authShared->setChecked(true);
key = line.mid(4, line.length());
}
if(key == keyLineEdit0->text()) keyRadio0->setChecked(true);
if(key == keyLineEdit1->text()) keyRadio1->setChecked(true);
if(key == keyLineEdit2->text()) keyRadio2->setChecked(true);
if(key == keyLineEdit3->text()) keyRadio3->setChecked(true);
}
if(line.contains("CHANNEL=")){
networkChannel->setValue(line.mid(line.find("CHANNEL=")+8, line.length()).toInt());
}
}
}
}
/**
* Saves settings to the wireless.opts file using the current profile
*/
void WLANImp::changeAndSaveSettingFile(){
QString wlanFile = WIRELESS_OPTS;
QFile::remove(wlanFile);
QFile file(wlanFile);
if (!file.open(IO_ReadWrite)){
qDebug(QString("WLANImp::changeAndSaveSettingFile(): Can't open file: %1 for writing.").arg(wlanFile).latin1());
return;
}
QTextStream stream( &file );
bool foundCase = false;
bool found = false;
bool output = true;
for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
QString line = (*it).simplifyWhiteSpace();
if(line.contains("case"))
foundCase = true;
// See if we found our scheme to write or the sceme couldn't be found
if((foundCase && line.contains("esac") && !found) ||
(foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#')){
// write out scheme
found = true;
output = false;
if(!line.contains("esac"))
stream << line << "\n";
if(!essAny->isChecked() == true){
stream << "\tESSID=any\n";
stream << "\tMODE=Managed\n";
}
else{
stream << "\tESSID=" << essSpecificLineEdit->text() << '\n';
stream << "\tMODE=" << ( networkType->currentItem() == 0 ? "Managed" : "ad-hoc") << '\n';
stream << "\tCHANNEL=" << networkChannel->value() << "\n";
}
stream << "\t#KEY0=" << keyLineEdit0->text() << "\n";
stream << "\t#KEY1=" << keyLineEdit1->text() << "\n";
stream << "\t#KEY2=" << keyLineEdit2->text() << "\n";
stream << "\t#KEY3=" << keyLineEdit3->text() << "\n";
if(wepEnabled->isChecked()){
stream << "\tKEY=\"";
if(keyRadio0->isChecked()) stream << keyLineEdit0->text();
if(keyRadio1->isChecked()) stream << keyLineEdit1->text();
if(keyRadio2->isChecked()) stream << keyLineEdit2->text();
if(keyRadio3->isChecked()) stream << keyLineEdit3->text();
if(authOpen->isChecked())
stream << " open";
else
stream << " restricted";
stream << "\"\n";
}
stream << "\tRATE=auto\n";
if(line.contains("esac"))
stream << line << "\n";
}
if(line.contains(";;"))
output = true;
if(output && (*it).length() )
stream << (*it) << '\n';
}
file.close();
}
/**
diff --git a/noncore/settings/networksettings/interfaces/interface.cpp b/noncore/settings/networksettings/interfaces/interface.cpp
index 7ffa76f..d964961 100644
--- a/noncore/settings/networksettings/interfaces/interface.cpp
+++ b/noncore/settings/networksettings/interfaces/interface.cpp
@@ -1,191 +1,191 @@
#include "interface.h"
#include <qdatetime.h>
#include <qfile.h>
#include <qdir.h>
#include <qfileinfo.h>
#include <qtextstream.h>
#define IFCONFIG "/sbin/ifconfig"
#define DHCP_INFO_DIR "/etc/dhcpc"
#include <stdio.h>
#include <stdlib.h>
Interface::Interface(QObject * parent, const char * name, bool newSatus): QObject(parent, name), hardwareName("Unknown"), moduleOwner(NULL), status(newSatus), attached(false), dhcp(false), macAddress(""), ip("0.0.0.0"), broadcast(""), subnetMask("0.0.0.0"){
refresh();
}
/**
* Set status
* @param newStatus - the new status
* emit updateInterface
*/
void Interface::setStatus(bool newStatus){
if(status != newStatus){
status = newStatus;
refresh();
}
};
/**
* Set if attached or not (802.11 card pulled out for example)
* @param isAttached - if attached
* emit updateInterface
*/
void Interface::setAttached(bool isAttached){
attached = isAttached;
emit(updateInterface(this));
};
/**
* Set Hardware name
* @param name - the new name
* emit updateInterface
*/
void Interface::setHardwareName(const QString &name){
hardwareName = name;
emit(updateInterface(this));
};
/**
* Set Module owner
* @param owner - the new owner
* emit updateInterface
*/
void Interface::setModuleOwner(Module *owner){
moduleOwner = owner;
emit(updateInterface(this));
};
/**
* Try to start the interface.
*/
void Interface::start(){
// check to see if we are already running.
if(true == status){
emit (updateMessage("Unable to start interface,\n already started"));
return;
}
int ret = system(QString("%1 %2 up").arg(IFCONFIG).arg(this->name()).latin1());
// See if it was successfull...
if(ret != 0){
- emit (updateMessage("Starting interface failed."));
+ emit (updateMessage("Starting interface failed"));
return;
}
status = true;
refresh();
emit (updateMessage("Start successfull"));
}
/**
* Try to stop the interface.
*/
void Interface::stop(){
// check to see if we are already stopped.
if(false == status){
emit (updateMessage("Unable to stop interface,\n already stopped"));
return;
}
int ret = system(QString("%1 %2 down").arg(IFCONFIG).arg(this->name()).latin1());
if(ret != 0){
- emit (updateMessage("Stopping interface failed."));
+ emit (updateMessage("Stopping interface failed"));
return;
}
status = false;
refresh();
emit (updateMessage("Stop successfull"));
}
/**
* Try to restart the interface.
*/
void Interface::restart(){
stop();
start();
}
/**
* Try to refresh the information about the interface.
* First call ifconfig, then check the dhcp-info file
* @return bool true if successfull.
*/
bool Interface::refresh(){
// See if we are up.
if(status == false){
macAddress = "";
ip = "0.0.0.0";
subnetMask = "0.0.0.0";
broadcast = "";
dhcp = false;
dhcpServerIp = "";
leaseObtained = "";
leaseExpires = "";
emit(updateInterface(this));
return true;
}
QString fileName = QString("/tmp/%1_ifconfig_info").arg(this->name());
int ret = system(QString("%1 %2 > %3").arg(IFCONFIG).arg(this->name()).arg(fileName).latin1());
if(ret != 0){
qDebug(QString("Interface: Ifconfig return value: %1, is not 0").arg(ret).latin1());
return false;
}
QFile file(fileName);
if (!file.open(IO_ReadOnly)){
qDebug(QString("Interface: Can't open file: %1").arg(fileName).latin1());
return false;
}
// Set to the defaults
macAddress = "";
ip = "0.0.0.0";
subnetMask = "0.0.0.0";
broadcast = "";
QTextStream stream( &file );
QString line;
while ( !stream.eof() ) {
line = stream.readLine();
if(line.contains("HWaddr")){
int mac = line.find("HWaddr");
macAddress = line.mid(mac+7, line.length());
}
if(line.contains("inet addr")){
int ipl = line.find("inet addr");
int space = line.find(" ", ipl+10);
ip = line.mid(ipl+10, space-ipl-10);
}
if(line.contains("Mask")){
int mask = line.find("Mask");
subnetMask = line.mid(mask+5, line.length());
}
if(line.contains("Bcast")){
int mask = line.find("Bcast");
int space = line.find(" ", mask+6);
broadcast = line.mid(mask+6, space-mask-6);
}
}
file.close();
QFile::remove(fileName);
// DHCP TESTING
// reset DHCP info
dhcpServerIp = "";
leaseObtained = "";
leaseExpires = "";
dhcp = false;
QString dhcpDirectory(DHCP_INFO_DIR);
QDir d(dhcpDirectory);
if(!d.exists(dhcpDirectory))
dhcpDirectory = "/var/run";
// See if we have
QString dhcpFile(QString(dhcpDirectory+"/dhcpcd-%1.info").arg(this->name()));
// If there is no DHCP information then exit now with no errors.
diff --git a/noncore/settings/networksettings/mainwindowimp.cpp b/noncore/settings/networksettings/mainwindowimp.cpp
index 7b93554..9a17743 100644
--- a/noncore/settings/networksettings/mainwindowimp.cpp
+++ b/noncore/settings/networksettings/mainwindowimp.cpp
@@ -227,284 +227,280 @@ Module* MainWindowImp::loadPlugin(const QString &pluginFileName, const QString &
// Try to get an object.
Module *object = ((Module* (*)()) functionPointer)();
if(object == NULL){
qDebug("MainWindowImp: Couldn't create object, but did load library!");
delete lib;
return NULL;
}
// Store for deletion later
libraries.insert(object, lib);
return object;
}
/**
* The Add button was clicked. Bring up the add dialog and if OK is hit
* load the plugin and append it to the list
*/
void MainWindowImp::addClicked(){
QMap<Module*, QLibrary*>::Iterator it;
QMap<QString, QString> list;
QMap<QString, Module*> newInterfaceOwners;
//list.insert("USB (PPP) / (ADD_TEST)", "A dialup connection over the USB port");
//list.insert("IrDa (PPP) / (ADD_TEST)", "A dialup connection over the IdDa port");
for( it = libraries.begin(); it != libraries.end(); ++it ){
if(it.key()){
(it.key())->possibleNewInterfaces(list);
}
}
// See if the list has anything that we can add.
if(list.count() == 0){
QMessageBox::information(this, "Sorry", "Nothing to add.", QMessageBox::Ok);
return;
}
AddConnectionImp addNewConnection(this, "AddConnectionImp", true);
addNewConnection.addConnections(list);
addNewConnection.showMaximized();
if(QDialog::Accepted == addNewConnection.exec()){
QListViewItem *item = addNewConnection.registeredServicesList->currentItem();
if(!item)
return;
for( it = libraries.begin(); it != libraries.end(); ++it ){
if(it.key()){
Interface *i = (it.key())->addNewInterface(item->text(0));
if(i){
interfaceNames.insert(i->getInterfaceName(), i);
updateInterface(i);
}
}
}
}
}
/**
* Prompt the user to see if they really want to do this.
* If they do then remove from the list and unload.
*/
void MainWindowImp::removeClicked(){
QListViewItem *item = connectionList->currentItem();
if(!item) {
QMessageBox::information(this, "Sorry","Please select an interface First.", QMessageBox::Ok);
return;
}
Interface *i = interfaceItems[item];
if(i->getModuleOwner() == NULL){
QMessageBox::information(this, "Can't remove interface.", "Interface is built in.", QMessageBox::Ok);
}
else{
if(!i->getModuleOwner()->remove(i))
QMessageBox::information(this, "Error", "Unable to remove.", QMessageBox::Ok);
else{
QMessageBox::information(this, "Success", "Interface was removed.", QMessageBox::Ok);
// TODO memory managment....
// who deletes the interface?
}
}
}
/**
* Pull up the configure about the currently selected interface.
* Report an error if no interface is selected.
* If the interface has a module owner then request its configure.
*/
void MainWindowImp::configureClicked(){
QListViewItem *item = connectionList->currentItem();
if(!item){
QMessageBox::information(this, "Sorry","Please select an interface first.", QMessageBox::Ok);
return;
}
Interface *i = interfaceItems[item];
if(i->getModuleOwner()){
QWidget *moduleConfigure = i->getModuleOwner()->configure(i);
if(moduleConfigure != NULL){
moduleConfigure->showMaximized();
- moduleConfigure->show();
return;
}
}
InterfaceSetupImpDialog *configure = new InterfaceSetupImpDialog(0, "InterfaceSetupImp", i, true, Qt::WDestructiveClose);
QString currentProfileText = currentProfileLabel->text();
if(currentProfileText.upper() == "ALL");
currentProfileText = "";
configure->setProfile(currentProfileText);
configure->showMaximized();
- configure->show();
}
/**
* Pull up the information about the currently selected interface.
* Report an error if no interface is selected.
* If the interface has a module owner then request its configure.
*/
void MainWindowImp::informationClicked(){
QListViewItem *item = connectionList->currentItem();
if(!item){
QMessageBox::information(this, "Sorry","Please select an interface First.", QMessageBox::Ok);
return;
}
Interface *i = interfaceItems[item];
if(!i->isAttached()){
QMessageBox::information(this, "Sorry","No information about\na disconnected interface.", QMessageBox::Ok);
return;
}
if(i->getModuleOwner()){
QWidget *moduleInformation = i->getModuleOwner()->information(i);
if(moduleInformation != NULL){
moduleInformation->showMaximized();
- moduleInformation->show();
return;
}
}
- InterfaceInformationImp *information = new InterfaceInformationImp(0, "InterfaceSetupImp", i, true);
- information->showMaximized();
- information->show();
+ InterfaceInformationImp information(0, "InterfaceSetupImp", i);
+ information.showMaximized();
}
/**
* Update this interface. If no QListViewItem exists create one.
* @param Interface* pointer to the interface that needs to be updated.
*/
void MainWindowImp::updateInterface(Interface *i){
if(!advancedUserMode){
if(i->getInterfaceName() == "lo")
return;
}
QListViewItem *item = NULL;
// Find the interface, making it if needed.
if(items.find(i) == items.end()){
item = new QListViewItem(connectionList, "", "", "");
// See if you can't find a module owner for this interface
QMap<Module*, QLibrary*>::Iterator it;
for( it = libraries.begin(); it != libraries.end(); ++it ){
if(it.key()->isOwner(i))
i->setModuleOwner(it.key());
}
items.insert(i, item);
interfaceItems.insert(item, i);
}
else
item = items[i];
// Update the icons and information
item->setPixmap(0, (Resource::loadPixmap(i->getStatus() ? "up": "down")));
QString typeName = "lan";
if(i->getHardwareName().contains("Local Loopback"))
typeName = "lo";
if(i->getInterfaceName().contains("irda"))
typeName = "irda";
if(i->getInterfaceName().contains("wlan"))
typeName = "wlan";
if(i->getInterfaceName().contains("usb"))
typeName = "usb";
if(!i->isAttached())
typeName = "connect_no";
// Actually try to use the Module
if(i->getModuleOwner() != NULL)
typeName = i->getModuleOwner()->getPixmapName(i);
- item->setPixmap(1, (Resource::loadPixmap(typeName)));
+ item->setPixmap(1, (Resource::loadPixmap(QString("networksetup/") + typeName)));
item->setText(2, i->getHardwareName());
item->setText(3, QString("(%1)").arg(i->getInterfaceName()));
item->setText(4, (i->getStatus()) ? i->getIp() : QString(""));
}
void MainWindowImp::newProfileChanged(const QString& newText){
if(newText.length() > 0)
newProfileButton->setEnabled(true);
else
newProfileButton->setEnabled(false);
}
/**
* Adds a new profile to the list of profiles.
* Don't add profiles that already exists.
* Appends to the list and QStringList
*/
void MainWindowImp::addProfile(){
QString newProfileName = newProfile->text();
if(profiles.grep(newProfileName).count() > 0){
QMessageBox::information(this, "Can't Add","Profile already exists.", QMessageBox::Ok);
return;
}
profiles.append(newProfileName);
profilesList->insertItem(newProfileName);
}
/**
* Removes the currently selected profile in the combo.
* Doesn't delete if there are less then 2 profiles.
*/
void MainWindowImp::removeProfile(){
if(profilesList->count() <= 1){
QMessageBox::information(this, "Can't remove.","At least one profile\nis needed.", QMessageBox::Ok);
return;
}
QString profileToRemove = profilesList->currentText();
if(profileToRemove == "All"){
QMessageBox::information(this, "Can't remove.","Can't remove default.", QMessageBox::Ok);
return;
}
// Can't remove the curent profile
if(profileToRemove == currentProfileLabel->text()){
QMessageBox::information(this, "Can't remove.",QString("%1 is the current profile.").arg(profileToRemove), QMessageBox::Ok);
return;
}
if(QMessageBox::information(this, "Question",QString("Remove profile: %1").arg(profileToRemove), QMessageBox::Ok, QMessageBox::Cancel) == QMessageBox::Ok){
profiles = QStringList::split(" ", profiles.join(" ").replace(QRegExp(profileToRemove), ""));
profilesList->clear();
for ( QStringList::Iterator it = profiles.begin(); it != profiles.end(); ++it)
profilesList->insertItem((*it));
// Remove any interface settings and mappings.
Interfaces interfaces;
// Go through them one by one
QMap<Interface*, QListViewItem*>::Iterator it;
for( it = items.begin(); it != items.end(); ++it ){
QString interfaceName = it.key()->getInterfaceName();
qDebug(interfaceName.latin1());
if(interfaces.setInterface(interfaceName + "_" + profileToRemove)){
interfaces.removeInterface();
if(interfaces.setMapping(interfaceName)){
if(profilesList->count() == 1)
interfaces.removeMapping();
else{
interfaces.removeMap("map", interfaceName + "_" + profileToRemove);
}
}
interfaces.write();
break;
}
}
}
}
/**
* A new profile has been selected, change.
* @param newProfile the new profile.
*/
void MainWindowImp::changeProfile(){
if(profilesList->currentItem() == -1){
QMessageBox::information(this, "Can't Change.","Please select a profile.", QMessageBox::Ok);
return;
}
QString newProfile = profilesList->text(profilesList->currentItem());
if(newProfile != currentProfileLabel->text()){
currentProfileLabel->setText(newProfile);
QFile::remove(scheme);
QFile file(scheme);
if ( file.open(IO_ReadWrite) ) {
QTextStream stream( &file );
stream << QString("SCHEME=%1").arg(newProfile);
file.close();
}
diff --git a/noncore/settings/networksettings/wlan/wlanimp.cpp b/noncore/settings/networksettings/wlan/wlanimp.cpp
index cc18fba..648932f 100644
--- a/noncore/settings/networksettings/wlan/wlanimp.cpp
+++ b/noncore/settings/networksettings/wlan/wlanimp.cpp
@@ -6,199 +6,199 @@
#include <qtextstream.h>
#include <qmessagebox.h>
#include <qlineedit.h>
#include <qlabel.h>
#include <qspinbox.h>
#include <qradiobutton.h>
#include <qcheckbox.h>
#include <qtabwidget.h>
#include <qcombobox.h>
/* system() */
#include <stdlib.h>
#define WIRELESS_OPTS "/etc/pcmcia/wireless.opts"
/**
* Constructor, read in the wireless.opts file for parsing later.
*/
WLANImp::WLANImp( QWidget* parent, const char* name, Interface *i, bool modal, WFlags fl):WLAN(parent, name, modal, fl), currentProfile("*") {
interfaceSetup = new InterfaceSetupImp(tabWidget, "InterfaceSetupImp", i);
tabWidget->insertTab(interfaceSetup, "TCP/IP");
// Read in the config file.
QString wlanFile = WIRELESS_OPTS;
QFile file(wlanFile);
if (file.open(IO_ReadOnly)){
QTextStream stream( &file );
QString line = "";
while ( !stream.eof() ) {
line += stream.readLine();
line += "\n";
}
file.close();
settingsFileText = QStringList::split("\n", line, true);
parseSettingFile();
}
else
qDebug(QString("WLANImp: Can't open file: %1 for reading.").arg(wlanFile).latin1());
connect(networkType, SIGNAL(activated(int)), this, SLOT(typeChanged(int)));
}
void WLANImp::typeChanged(int mod){
networkChannel->setEnabled(mod);
channelLabel->setEnabled(mod);
}
/**
* Change the profile for both wireless settings and network settings.
*/
void WLANImp::setProfile(const QString &profile){
interfaceSetup->setProfile(profile);
parseSettingFile();
}
/**
* Parses the settings file that was read in and gets any setting from it.
*/
void WLANImp::parseSettingFile(){
bool foundCase = false;
bool found = false;
for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
QString line = (*it).simplifyWhiteSpace();
if(line.contains("case"))
foundCase = true;
// See if we found our scheme to write or the sceme couldn't be found
if((foundCase && line.contains("esac")) ||
(foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#'))
found = true;
if(line.contains(";;"))
found = false;
if(found){
// write out scheme
if(line.contains("ESSID=")){
QString id = line.mid(line.find("ESSID=")+6, line.length());
if(id == "any"){
essAny->setChecked(false);
}else{
essAny->setChecked(true);
essSpecificLineEdit->setText(id);
}
}
if(line.contains("MODE=")){
QString mode = line.mid(line.find("MODE=")+5, line.length());
if(mode == "Managed"){
networkType->setCurrentItem(0);
channelLabel->setEnabled(false);
networkChannel->setEnabled(false);
}
else{
networkType->setCurrentItem(1);
networkChannel->setEnabled(true);
channelLabel->setEnabled(true);
}
}
if(line.contains("#KEY0="))
- keyLineEdit0->setText(line.mid(5, line.length()));
+ keyLineEdit0->setText(line.mid(6, line.length()));
if(line.contains("#KEY1="))
- keyLineEdit1->setText(line.mid(5, line.length()));
+ keyLineEdit1->setText(line.mid(6, line.length()));
if(line.contains("#KEY2="))
- keyLineEdit2->setText(line.mid(5, line.length()));
+ keyLineEdit2->setText(line.mid(6, line.length()));
if(line.contains("#KEY3="))
- keyLineEdit3->setText(line.mid(5, line.length()));
+ keyLineEdit3->setText(line.mid(6, line.length()));
if(line.contains("KEY=")){
wepEnabled->setChecked(true);
QString key;
if(line.right(5) == (" open")){
key = line.mid(4, line.length()-5);
authOpen->setChecked(true);
authShared->setChecked(false);
}
else{
authOpen->setChecked(false);
authShared->setChecked(true);
key = line.mid(4, line.length());
}
if(key == keyLineEdit0->text()) keyRadio0->setChecked(true);
if(key == keyLineEdit1->text()) keyRadio1->setChecked(true);
if(key == keyLineEdit2->text()) keyRadio2->setChecked(true);
if(key == keyLineEdit3->text()) keyRadio3->setChecked(true);
}
if(line.contains("CHANNEL=")){
networkChannel->setValue(line.mid(line.find("CHANNEL=")+8, line.length()).toInt());
}
}
}
}
/**
* Saves settings to the wireless.opts file using the current profile
*/
void WLANImp::changeAndSaveSettingFile(){
QString wlanFile = WIRELESS_OPTS;
QFile::remove(wlanFile);
QFile file(wlanFile);
if (!file.open(IO_ReadWrite)){
qDebug(QString("WLANImp::changeAndSaveSettingFile(): Can't open file: %1 for writing.").arg(wlanFile).latin1());
return;
}
QTextStream stream( &file );
bool foundCase = false;
bool found = false;
bool output = true;
for ( QStringList::Iterator it = settingsFileText.begin(); it != settingsFileText.end(); ++it ) {
QString line = (*it).simplifyWhiteSpace();
if(line.contains("case"))
foundCase = true;
// See if we found our scheme to write or the sceme couldn't be found
if((foundCase && line.contains("esac") && !found) ||
(foundCase && line.left(currentProfile.length()+7) == currentProfile + ",*,*,*)" && line.at(0) != '#')){
// write out scheme
found = true;
output = false;
if(!line.contains("esac"))
stream << line << "\n";
if(!essAny->isChecked() == true){
stream << "\tESSID=any\n";
stream << "\tMODE=Managed\n";
}
else{
stream << "\tESSID=" << essSpecificLineEdit->text() << '\n';
stream << "\tMODE=" << ( networkType->currentItem() == 0 ? "Managed" : "ad-hoc") << '\n';
stream << "\tCHANNEL=" << networkChannel->value() << "\n";
}
stream << "\t#KEY0=" << keyLineEdit0->text() << "\n";
stream << "\t#KEY1=" << keyLineEdit1->text() << "\n";
stream << "\t#KEY2=" << keyLineEdit2->text() << "\n";
stream << "\t#KEY3=" << keyLineEdit3->text() << "\n";
if(wepEnabled->isChecked()){
stream << "\tKEY=\"";
if(keyRadio0->isChecked()) stream << keyLineEdit0->text();
if(keyRadio1->isChecked()) stream << keyLineEdit1->text();
if(keyRadio2->isChecked()) stream << keyLineEdit2->text();
if(keyRadio3->isChecked()) stream << keyLineEdit3->text();
if(authOpen->isChecked())
stream << " open";
else
stream << " restricted";
stream << "\"\n";
}
stream << "\tRATE=auto\n";
if(line.contains("esac"))
stream << line << "\n";
}
if(line.contains(";;"))
output = true;
if(output && (*it).length() )
stream << (*it) << '\n';
}
file.close();
}
/**