summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--libopie/big-screen/IDEAS81
-rw-r--r--libopie/big-screen/big-screen.pro2
-rw-r--r--libopie/big-screen/example/osplitter_example.cpp28
-rw-r--r--libopie/big-screen/example/osplitter_example.h20
-rw-r--r--libopie/big-screen/example/osplitter_example.obin17276 -> 0 bytes
-rw-r--r--libopie/big-screen/example/osplitter_example.pro13
-rw-r--r--libopie/big-screen/example/osplitter_mail.cpp82
-rw-r--r--libopie/big-screen/example/osplitter_mail.h49
-rw-r--r--libopie/big-screen/example/osplitter_mail.pro12
-rw-r--r--libopie/big-screen/example/owidgetstack_example.cpp131
-rw-r--r--libopie/big-screen/example/owidgetstack_example.h27
-rw-r--r--libopie/big-screen/example/owidgetstack_example.pro13
-rw-r--r--libopie/big-screen/obarcollection.h107
-rw-r--r--libopie/big-screen/obigscreen_p.h20
-rw-r--r--libopie/big-screen/omodalhelper.cpp165
-rw-r--r--libopie/big-screen/omodalhelper.h708
-rw-r--r--libopie/big-screen/osplitter.cpp583
-rw-r--r--libopie/big-screen/osplitter.h146
-rw-r--r--libopie/big-screen/owidgetstack.cpp404
-rw-r--r--libopie/big-screen/owidgetstack.h127
-rw-r--r--libopie/libopie.pro1
21 files changed, 0 insertions, 2719 deletions
diff --git a/libopie/big-screen/IDEAS b/libopie/big-screen/IDEAS
deleted file mode 100644
index 27a4d6e..0000000
--- a/libopie/big-screen/IDEAS
+++ b/dev/null
@@ -1,81 +0,0 @@
-Now that PDAs get a VGA resolution and Opie runs on Webpads
-and could be used as a Kiosk secure environment the design
-decision that were right for a 320x240/240x320 doesn't necessary
-to be right for bigger screens.
-
-Remember most desktops a few years ago had only a resolution
-of 800x600.
-Then also to remember is that a webpad with 640x480 is different to
-a PDA with the same resolution. The PDA has a much smaller
-physical display.
-
-With higher resolution the feeling of a desktop comes.
-
-Problems with current Opie:
- -InputMethod use full width but most of the times are not high enough
- This actually makes it harder to input and looks stupid.
- -ToolBars only feels strange on bigger screens. Maybe do it like WinCE3 does
- share the ToolBar with MenuBar if they're too big for the screen allow handles
- to either show the left or right side. Note that the handle from Qt looks
- bad and should be patched away
- -The Escape/Close back to View does not make sense on bigger screens and desktop
- on a desktop you might even want to show multiple views and detach from the 'system'
- view
- -Modality. Dunnow how you get back to the enter dialog without modality in Qt/E fix it?
- On bigger screen this is not the problem you can move windows. But you should try
- to be less modal in the future.
- I've added a small to qpeapplication to iterate over the toplevel widgets 99%
- ( click on the taskbar to iterate over the widgets first time nothing is changed )
- , BUT it should be avoided to use modality showMaximized(), exec()
- INSTEAD we will use a modal helper where one can register to show a dialog for uid
- type and will get a signal once the settings need to be applied, rejected or discarded.
- This way you can almost work like with exec(), do not need to care for freeing.
- Problems sometimes to have more than one dialog in memory is expensive. Allow queueing
- and reusing this widget ( only set the Record new? )
- -Viewing on bigger screens you may want to have a seperate viewer widget ( topLevel ) which
- might also get spon off from the normal operation. The (X) close go back does not make
- sense on bigger screens and feels strange
- -Sizing and Auto sizing of widgets
-
-Widgets and Classes
-
- Toolbar/Action and Popups:
- While KParts with XMLGUI provide a fantastic technology to change the GUI
- on the fly. Parsing these GUI descriptions is not an option for PDAs
- specially not on start up.
- Instead we will need to use normal object in this case QAction and QPopupMenuss. We
- will then group these Actions into groups. Each group can have children and one
- parent. Each group has two attributes one for the menubar and one for the toolbar.
- Attributes for each might be | together. Always, Never, Auto are the attributes I
- can think of tonite. Always will place this group always there, Never yeah never,
- Automatic lets the later described Manager decide. Also one could or MightSpinOff
- to a group. This way a child group might get spon off if enough place is there.
- You cann add QAction and QPopupMenus to the group the Group will not take owner ship
- and you might use your QAction in other places as well.
- Toplevel groups need to be registered to the manager and this manager will depending
- on global settings place and control MenuBar and ToolBar/ToolBar.
- This allows to dynamically create toolbar on the fly
-
- Modality class:
- It'll be a template with a QSignal to tell about changes and a method to get to know
- which action to be applied. It has three template parameters one for the WIdget used
- and one for the type of uid and the last for the editor widget which
- at least needs to provide some methods as well.
- If you need to edit an widget you simply tell the helper about it. If present it'll
- raise the widget or either queue it or create a new editor depending on a policy
- one can set manually or get from the system.
-
- Viewing:
- We will provide a special OWidgetStack which either is a real QWidgetStack or a QList
- of toplevel widgets to be raised. One has to see how one can use it with todolist
- and datebook. specially the switching back and forth need to be handled but with possible
- no code reordering ( least intrusive )
- Viewing II:
- Example Advanced FM has a tabwidget but on a SIMpad it would make perfect sense to use a
- QSplitter or QVBox. We will provide an OSplitter which either provides the one
- or the other widget depending on the size
-
-
-These small changes ( replacing Q with O + bit more) should make Opie a better environment for
-bigger screens. The additional library memory is a fair trade off and memory can be recovered
-by other technics \ No newline at end of file
diff --git a/libopie/big-screen/big-screen.pro b/libopie/big-screen/big-screen.pro
deleted file mode 100644
index f324d3c..0000000
--- a/libopie/big-screen/big-screen.pro
+++ b/dev/null
@@ -1,2 +0,0 @@
-HEADERS += big-screen/obigscreen_p.h big-screen/osplitter.h big-screen/owidgetstack.h #big-screen/omodalhelper.h
-SOURCES += big-screen/osplitter.cpp big-screen/owidgetstack.cpp #big-screen/omodalhelper.cpp
diff --git a/libopie/big-screen/example/osplitter_example.cpp b/libopie/big-screen/example/osplitter_example.cpp
deleted file mode 100644
index e337379..0000000
--- a/libopie/big-screen/example/osplitter_example.cpp
+++ b/dev/null
@@ -1,28 +0,0 @@
-#include <qdir.h>
-#include <qlayout.h>
-
-#include "../osplitter.h"
-
-#include <qpe/qpeapplication.h>
-#include <opie/oapplicationfactory.h>
-
-#include "osplitter_example.h"
-
-OPIE_EXPORT_APP( OApplicationFactory<OSplitterExample> )
-
-OSplitterExample::OSplitterExample( QWidget *w,const char* n,WFlags f )
- : QWidget( w, n, f ){
- QVBoxLayout * lay = new QVBoxLayout(this);
- OSplitter * splitter = new OSplitter( Horizontal, this );
- lay->addWidget( splitter );
-
- OFileSelector *selector = new OFileSelector( splitter, OFileSelector::FileSelector,
- OFileSelector::Normal, QDir::homeDirPath(),
- QString::null );
- splitter->addWidget( selector, "zoom", tr("Selector 1") );
-
- selector = new OFileSelector( splitter, OFileSelector::FileSelector, OFileSelector::Normal,
- QDir::homeDirPath(), QString::null );
- splitter->addWidget( selector, "zoom", tr("Selector 2") );
-
-}
diff --git a/libopie/big-screen/example/osplitter_example.h b/libopie/big-screen/example/osplitter_example.h
deleted file mode 100644
index ae8f120..0000000
--- a/libopie/big-screen/example/osplitter_example.h
+++ b/dev/null
@@ -1,20 +0,0 @@
-/*
- * May be used, copied and modified wihtout any limitation
- */
-
-#ifndef OSPlitter_EXAMPLE_H
-#define OSPlitter_EXAMPLE_H
-
-#include <qvbox.h>
-#include <opie/ofileselector.h>
-
-class OSplitterExample : public QWidget {
- Q_OBJECT
-public:
- static QString appName() { return QString::fromLatin1("osplitter_example"); }
- OSplitterExample( QWidget *parent, const char* name, WFlags fl );
-
-};
-
-
-#endif
diff --git a/libopie/big-screen/example/osplitter_example.o b/libopie/big-screen/example/osplitter_example.o
deleted file mode 100644
index e52d5d9..0000000
--- a/libopie/big-screen/example/osplitter_example.o
+++ b/dev/null
Binary files differ
diff --git a/libopie/big-screen/example/osplitter_example.pro b/libopie/big-screen/example/osplitter_example.pro
deleted file mode 100644
index b12bf17..0000000
--- a/libopie/big-screen/example/osplitter_example.pro
+++ b/dev/null
@@ -1,13 +0,0 @@
-CONFIG = qt warn_on
-TEMPLATE = app
-TARGET = osplitter_example
-
-HEADERS = osplitter_example.h ../osplitter.h
-SOURCES = osplitter_example.cpp ../osplitter.cpp
-
-INCLUDEPATH += $(OPIEDIR)/include ../
-DEPENDSPATH += $(OPIEDIR)/include
-
-LIBS += -lqpe -lopie
-
-include ( $(OPIEDIR)/include.pro ) \ No newline at end of file
diff --git a/libopie/big-screen/example/osplitter_mail.cpp b/libopie/big-screen/example/osplitter_mail.cpp
deleted file mode 100644
index 4356baa..0000000
--- a/libopie/big-screen/example/osplitter_mail.cpp
+++ b/dev/null
@@ -1,82 +0,0 @@
-
-#include <qstring.h>
-#include <qlabel.h>
-#include <qheader.h>
-#include <qlayout.h>
-
-#include <qpe/qpeapplication.h>
-#include <opie/oapplicationfactory.h>
-
-#include "../osplitter.h"
-
-#include "osplitter_mail.h"
-
-
-OPIE_EXPORT_APP( OApplicationFactory<ListViews> )
-
-class Folder {
- int dummy;
-};
-
-// -----------------------------------------------------------------
-
-ListViews::ListViews( QWidget* p, const char* name, WFlags fl )
- : QWidget( p, name, fl ) {
- qApp->installEventFilter( this );
- m_lstFolders.setAutoDelete( true );
- QHBoxLayout *lay = new QHBoxLayout(this);
-
- m_splitter = new OSplitter( Horizontal, this, "SPlitter 1" );
- lay->addWidget( m_splitter );
- connect(m_splitter, SIGNAL(sizeChange(bool,const QSize&) ),
- this, SLOT(slotSizeChange(bool,const QSize&) ) );
-
- m_overview = new QListView( m_splitter );
- m_overview->header()->setClickEnabled( FALSE );
- m_overview->addColumn( tr("Folder") );
- m_overview->setMaximumWidth( 200 );
- m_splitter->addWidget( m_overview, "zoom", tr("Folder Overview") );
- m_splitter->setSizeChange( 300 );
-
- /* OSplitter starts with the small mode */
- m_messages = 0;
- m_message = m_attach = 0;
-
- splitti = new OSplitter( Vertical, m_splitter, "Splitti2" );
- splitti->setSizeChange( 300 );
- splitti->setSizePolicy( QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding ) );
-
- QLabel *lbl = new QLabel(splitti);
- lbl->setTextFormat ( Qt::RichText );
- lbl->setText("<br><br><b>Test Test Test</b><br><br><p>Fooooo hjhh</p>");
-
- m_messages = new QListView( splitti );
- m_messages->addColumn(" Messages ");
-
- folder1 = new QListView( splitti );
- folder1->addColumn( "Messages 2 " );
-
- splitti->addWidget(m_messages, "mail", tr("Mails") );
- splitti->addWidget(folder1, "folder", tr("Folder") );
- splitti->addWidget( lbl, "logo", tr("Label") );
- m_message = lbl;
-
- m_splitter->addWidget( splitti );
-
-}
-
-
-ListViews::~ListViews() {
-
-}
-
-
-bool ListViews::eventFilter( QObject* obj, QEvent* ev ) {
- if (!obj->isWidgetType() )
- return false;
- if ( ev->type() == QEvent::MouseButtonRelease ) {
- qWarning(" name %s, class %s", obj->name(), obj->className() );
- }
-
- return false;
-}
diff --git a/libopie/big-screen/example/osplitter_mail.h b/libopie/big-screen/example/osplitter_mail.h
deleted file mode 100644
index b7e7efe..0000000
--- a/libopie/big-screen/example/osplitter_mail.h
+++ b/dev/null
@@ -1,49 +0,0 @@
-/*
- * You may use, modify and distribute this code without any limitation
- */
-
-/*
- * Header file for a more complete email client like
- * layout
- */
-
-#ifndef OPIE_SPLITTER_MAIL_EXAMPLE_H
-#define OPIE_SPLITTER_MAIL_EXAMPLE_H
-
-#include <qwidget.h>
-#include <qlist.h>
-#include <qlistview.h>
-
-class Folder;
-class QLabel;
-
-class OSplitter;
-class ListViews : public QWidget {
- Q_OBJECT
-public:
- static QString appName() { return QString::fromLatin1("osplitter-mail"); }
- ListViews( QWidget* parent, const char * name, WFlags fl );
- ~ListViews();
-
- bool eventFilter( QObject* , QEvent* );
-private:
- void initFolders();
- void initFolder( Folder *folder, unsigned int &count );
-
- QListView *m_messages, *m_overview;
- QLabel *m_message, *m_attach;
- QList<QListView> m_folders; // used in tab mode
- QList<Folder> m_lstFolders;
- bool m_mode : 1; // bitfield
- OSplitter *m_splitter;
- OSplitter *splitti;
- QListView *folder1;
-#if 0
-//private slots:
-// void slotFolderChanged( QListViewItem* );
-// void slotMessageChanged();
-// void slotSizeChange( bool, const QSize& );
-#endif
-};
-
-#endif
diff --git a/libopie/big-screen/example/osplitter_mail.pro b/libopie/big-screen/example/osplitter_mail.pro
deleted file mode 100644
index ec6e626..0000000
--- a/libopie/big-screen/example/osplitter_mail.pro
+++ b/dev/null
@@ -1,12 +0,0 @@
-CONFIG += qt warn_on
-TEMPLATE = app
-TARGET = osplitter-mail
-
-INCLUDEPATH += $(OPIEDIR)/include
-DEPENDSPATH += $(OPIEDIR)/include
-
-HEADERS = osplitter_mail.h
-SOURCES = osplitter_mail.cpp
-
-LIBS += -lqpe -lopie
-include ( $(OPIEDIR)/include.pro )
diff --git a/libopie/big-screen/example/owidgetstack_example.cpp b/libopie/big-screen/example/owidgetstack_example.cpp
deleted file mode 100644
index a6b8201..0000000
--- a/libopie/big-screen/example/owidgetstack_example.cpp
+++ b/dev/null
@@ -1,131 +0,0 @@
-/*
- * You may use, modify and distribute this example without any limitation
- */
-
-#include <qaction.h>
-#include <qtoolbar.h>
-#include <qpopupmenu.h>
-#include <qmenubar.h>
-#include <qlayout.h>
-#include <qlabel.h>
-#include <qpushbutton.h>
-#include <qsignalmapper.h>
-
-#include <qpe/resource.h>
-
-#include "../owidgetstack.h"
-
-#include "owidgetstack_example.h"
-
-#include <qpe/qpeapplication.h>
-#include <opie/oapplicationfactory.h>
-
-OPIE_EXPORT_APP( OApplicationFactory<StackExample> )
-
-StackExample::StackExample( QWidget* parent, const char* name, WFlags fl )
- : QMainWindow( parent, name, fl )
-{
- m_stack = new OWidgetStack( this );
- setCentralWidget( m_stack );
-
- /* nice Signal Mapper ;) */
- QSignalMapper *sm = new QSignalMapper(this);
- connect(sm, SIGNAL(mapped(int) ), m_stack, SLOT(raiseWidget(int)) );
-
- /* toolbar first but this should be known from the other examples */
- setToolBarsMovable( false );
-
- /* only a menubar here */
- QToolBar* holder = new QToolBar( this );
- holder->setHorizontalStretchable( true );
-
- QMenuBar *bar = new QMenuBar( holder );
- QPopupMenu *menu = new QPopupMenu( this );
-
- QAction* a = new QAction( tr("Show MainWidget"), Resource::loadPixmap("zoom"),
- QString::null, 0, this, 0 );
- sm->setMapping(a, 1 );
- connect(a, SIGNAL(activated() ),
- sm, SLOT(map() ) );
- a->addTo( menu );
-
- a = new QAction( tr("Show Details Small"), Resource::loadPixmap("zoom"),
- QString::null, 0, this, 0 );
- sm->setMapping(a, 2 );
- connect(a, SIGNAL(activated() ),
- sm, SLOT(map() ) );
- a->addTo( menu );
-
- a = new QAction( tr("Show Details More"), Resource::loadPixmap("zoom"),
- QString::null, 0, this, 0 );
- sm->setMapping(a, 3 );
- connect(a, SIGNAL(activated() ),
- sm, SLOT(map() ) );
- a->addTo( menu );
-
- a = new QAction( tr("Show Details All"), Resource::loadPixmap("zoom"),
- QString::null, 0, this, 0 );
- sm->setMapping(a, 4 );
- connect(a, SIGNAL(activated() ),
- sm, SLOT(map() ) );
-
- bar->insertItem( tr("Actions"), menu );
-
- /* now the gui */
-
- /* first widget, main widget */
- QWidget * wid = new QWidget( m_stack );
- QGridLayout *grid = new QGridLayout(wid, 2, 2 );
-
- QPushButton *btn = new QPushButton( tr("Show Details Small"), wid, "details1" );
- sm->setMapping(btn, 2 );
- connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) );
- grid->addWidget( btn, 0, 0 );
-
- btn = new QPushButton( tr("Show Details Medium"), wid, "details2");
- sm->setMapping(btn, 3 );
- connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) );
- grid->addWidget( btn, 0, 1 );
-
- btn = new QPushButton( tr("Show Details All"), wid, "details3");
- sm->setMapping(btn, 4 );
- connect(btn, SIGNAL(clicked()), sm, SLOT(map() ) );
- grid->addWidget( btn, 1, 1 );
-
- m_stack->addWidget( wid, 1 );
- m_main = wid;
-
- QLabel *lbl = new QLabel(m_stack );
- lbl->setText(tr("Only small Details are shown here. Määh") );
- m_stack->addWidget( lbl, 2 );
-
- lbl = new QLabel( m_stack );
- lbl->setText( tr("Some more details....Wo ist das Schaf?") );
- m_stack->addWidget( lbl, 3 );
-
- lbl = new QLabel( m_stack );
- lbl->setText( tr("<qt>Ne nicht in Bayerisch Gmain sondern in Berlin<br>Vermiss und meine Augen werden nicht eckig, da mein Bildschirm abgerundet ist<br>Es lebe Hamburg Süd,weiss du, verstehst du? ;)<br>Susi ist dOOf, es lebe die Ofenecke...", "hard to translate that") );
- m_stack->addWidget( lbl, 4 );
-
-
- /* THE signal mapper does all the magic */
- m_stack->raiseWidget( m_main );
-}
-
-
-StackExample::~StackExample() {
-
-}
-
-
-
-void StackExample::closeEvent( QCloseEvent* ev) {
- /* if the close even came when we displayed a details */
- if (m_stack->visibleWidget() != m_main ) {
- m_stack->raiseWidget( m_main );
- ev->ignore();
- return;
- }
-
- ev->accept();
-}
diff --git a/libopie/big-screen/example/owidgetstack_example.h b/libopie/big-screen/example/owidgetstack_example.h
deleted file mode 100644
index 7977b48..0000000
--- a/libopie/big-screen/example/owidgetstack_example.h
+++ b/dev/null
@@ -1,27 +0,0 @@
-/*
- * You may use, modify and distribute this example without any limitation
- */
-
-#ifndef O_STACK_EXAMPLE_SIMPLE_H
-#define O_STACK_EXAMPLE_SIMPLE_H
-
-#include <qmainwindow.h>
-
-
-class OWidgetStack;
-class StackExample : public QMainWindow {
- Q_OBJECT
-public:
- StackExample( QWidget* paren, const char* name, WFlags fl );
- ~StackExample();
- static QString appName() { return QString::fromLatin1("owidgetstack-example"); }
-
-protected:
- void closeEvent( QCloseEvent* e );
-private:
- OWidgetStack* m_stack;
- QWidget* m_main;
-
-};
-
-#endif
diff --git a/libopie/big-screen/example/owidgetstack_example.pro b/libopie/big-screen/example/owidgetstack_example.pro
deleted file mode 100644
index ad1dc09..0000000
--- a/libopie/big-screen/example/owidgetstack_example.pro
+++ b/dev/null
@@ -1,13 +0,0 @@
-CONFIG += qt warn_on
-TEMPLATE = app
-TARGET = owidgetstack-example
-
-SOURCES = ../owidgetstack.cpp owidgetstack_example.cpp
-HEADERS = ../owidgetstack.h owidgetstack_example.h
-
-INCLUDEPATH += $(OPIEDIR)/include
-DEPENDSPATH += $(OPIEDIR)/include
-
-LIBS += -lqpe
-
-include ( $(OPIEDIR)/include.pro )
diff --git a/libopie/big-screen/obarcollection.h b/libopie/big-screen/obarcollection.h
deleted file mode 100644
index 5822360..0000000
--- a/libopie/big-screen/obarcollection.h
+++ b/dev/null
@@ -1,107 +0,0 @@
-/*
-               =. This file is part of the OPIE Project
-             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
-           .>+-=
- _;:,     .>    :=|. This library is free software; you can
-.> <`_,   >  .   <= redistribute it and/or modify it under
-:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
-.="- .-=="i,     .._ License as published by the Free Software
- - .   .-<_>     .<> Foundation; either version 2 of the License,
-     ._= =}       : or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s. This library is distributed in the hope that
-     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . . without even the implied warranty of
-    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ; Library General Public License for more
-++=   -.     .`     .: details.
- :     =  ...= . :.=-
- -.   .:....=;==+<; You should have received a copy of the GNU
-  -_. . .   )=.  = Library General Public License along with
-    --        :-=` this library; see the file COPYING.LIB.
- If not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef HAZE_OBAR_EXTENSION
-#define HAZE_OBAR_EXTENSION
-
-#include <qstring.h>
-#include <qwidget.h>
-
-class QAction;
-class QPopupMenu;
-
-/*
- * ### TODO
- * -Consider Life Updates
- * -Make ValueBased like Opie-featurelist
- */
-
-/**
- * The different screen sizes have different look and feel. On bigger
- * screens only a QToolBar feels strange. One is at least known to have
- * a Help-Menu, a File Menu with Quit/Exit but instead of providing two
- * different ways / two action sets we will group actions to gether and give
- * them attributes when and where we might want them to be visible.
- * We can also group actions. For example you could Group All Actions
- * into the File Group. This means with many actions you would only have more toolbar
- * actions but many sub menus in File. On bigger screen this would automatically
- * expand to a full blown MenuBar and ToolButtons.
- *
- * @short Grouping of actions for dynamic Bar Generation
- * @version 0.01
- * @author hOlgAr
- */
-class OBarGroup {
-public:
- enum Preference { Allways, Never, IfPlace };
- OBarGroup( const QString& name, enum Preference groupPreference );
- ~OBarGroup();
-
- void add( QAction* action, enum Preference menuPreference,
- enum Preference toolpreference );
- void add( const QString&, QPopupMenu* );
-
- void add( OBarGroup* );
-
- void remove( QAction* action );
- void remove( QMap* );
-
-protected:
- OBarGroup* parent()const;
-
-private:
-};
-
-
-/**
- * Add your groups in order to the bar manager
- * and either call createGUI() on it, or tell it
- * it the mainwindow and it is listening to the show event
- * and then creates the toolbar
- */
-class OBarManager : public QObject{
-public:
- OBarManager( QWindow* parent );
- ~OBarManager();
-
- void add( OBarGroup*, int pos = -1 );
- void remove( OBarGroup* );
-
- bool eventFilter( QObject* , QEvent* );
-
-public slots:
- void createGUI();
-};
-
-/*
- * ### TODO GUI merging
- */
-
-#endif
-
-
diff --git a/libopie/big-screen/obigscreen_p.h b/libopie/big-screen/obigscreen_p.h
deleted file mode 100644
index ed256d9..0000000
--- a/libopie/big-screen/obigscreen_p.h
+++ b/dev/null
@@ -1,20 +0,0 @@
-#ifndef OPIE_BIG_SCREEN_PRIVATE
-#define OPIE_BIG_SCREEN_PRIVATE
-
-namespace Opie {
-
-struct OSplitterContainer {
- bool operator==( const OSplitterContainer& o)const {
- if (widget != o.widget ) return false;
- if (icon != o.icon ) return false;
- if (name != o.name ) return false;
- return true;
- }
- QWidget* widget;
- QString icon;
- QString name;
-};
-
-}
-
-#endif
diff --git a/libopie/big-screen/omodalhelper.cpp b/libopie/big-screen/omodalhelper.cpp
deleted file mode 100644
index c5a47b3..0000000
--- a/libopie/big-screen/omodalhelper.cpp
+++ b/dev/null
@@ -1,165 +0,0 @@
-/*
-               =. This file is part of the OPIE Project
-             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
-           .>+-=
- _;:,     .>    :=|. This library is free software; you can
-.> <`_,   >  .   <= redistribute it and/or modify it under
-:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
-.="- .-=="i,     .._ License as published by the Free Software
- - .   .-<_>     .<> Foundation; either version 2 of the License,
-     ._= =}       : or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s. This library is distributed in the hope that
-     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . . without even the implied warranty of
-    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ; Library General Public License for more
-++=   -.     .`     .: details.
- :     =  ...= . :.=-
- -.   .:....=;==+<; You should have received a copy of the GNU
-  -_. . .   )=.  = Library General Public License along with
-    --        :-=` this library; see the file COPYING.LIB.
- If not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
-*/
-
-#include <qpushbutton.h>
-#include <qvbox.h>
-#include <qlayout.h>
-#include <qlabel.h>
-
-#include "omodalhelper.h"
-
-
-/* SIgnal handling */
-OModalHelperSignal::OModalHelperSignal( OModalHelperBase* base, QObject* parent )
- : QObject( parent, "OModal Helper Signal" ), m_base( base ) {
-}
-
-OModalHelperSignal::~OModalHelperSignal() {
- /* special the ancestor deletes its creator */
- delete m_base;
-}
-
-
-/* Helper Controler */
-/*
- * the dialogs signal will be slotted here
- * and we will call into m_base
- */
-OModalHelperControler::OModalHelperControler( OModalHelperBase* base, QObject* parent )
- : QObject(parent, "OModal Helper Controler" ), m_base( base ), m_dia( 0 ), m_id( -1 )
-{
-}
-
-TransactionID OModalHelperControler::transactionID()const {
- return m_id;
-}
-
-void OModalHelperControler::setTransactionID( TransactionID id ) {
- m_dia = 0;
- m_id = id;
-}
-
-QDialog* OModalHelperControler::dialog()const {
- return m_dia;
-}
-
-/*
- * If we're in the New mode we will map the QDialog
- * to the TransactionID
- */
-void OModalHelperControler::done( int result ) {
- if ( sender() && !sender()->isA("OModalQueuedDialog") )
- m_dia = static_cast<QDialog*>( sender() );
-
- m_base->done( result, m_id );
-}
-
-void OModalHelperControler::next() {
- m_base->next( m_id );
-}
-
-void OModalHelperControler::prev() {
- m_base->prev( m_id );
-}
-
-/* The Queued Dialog inclusive QueuedBar */
-struct OModalQueueBar : public QHBox {
- QPushButton* next;
- QPushButton* prev;
- QLabel * label;
-
- OModalQueueBar( QWidget* parent );
- void setText( const QString& str );
-};
-
-OModalQueueBar::OModalQueueBar( QWidget* parent )
- : QWidget( parent, "OModal Queue Bar" ) {
- prev = new QPushButton( this );
- prev->setText( OModalQueuedDialog::tr("Prev") );
-
- label = new QLabel(this);
-
- next = new QPushButton( this );
- next->setText( OModalQueuedDialog::tr("Next") );
-}
-
-void OModalQueueBar::setText( const QString& str ) {
- label->setText( str );
-}
-
-
-OModalQueuedDialog::OModalQueuedDialog( QDialog* mainWidget )
- : QDialog(0, "OModal Queued Dialog" )
-{
- QVBoxLayout *lay = new QVBoxLayout( this );
-
- m_bar = new OModalQueueBar( this );
- lay->addWidget( m_bar );
-
- m_center = mainWidget;
- m_center->reparent(this, 0, QPoint(0, 0) );
- lay->addWidget( m_center );
-
-
- connect(m_bar->next, SIGNAL(clicked() ), this,
- SIGNAL(next() ) );
- connect(m_bar->prev, SIGNAL(clicked() ), this,
- SIGNAL(prev() ) );
-
-}
-
-OModalQueuedDialog::~OModalQueuedDialog() {
-}
-
-QDialog* OModalQueuedDialog::centerDialog()const {
- return m_center;
-}
-
-void OModalQueuedDialog::setQueueBarEnabled( bool b) {
- /* in Qt3 use setEnabled( bool ) */
- if (b)
- m_bar->show();
- else
- m_bar->hide();
-}
-
-void OModalQueuedDialog::setRecord( int record, int count ) {
- if (!record && !count ) {
- hide();
- return;
- }else
- show();
-
- if ( count > 1 )
- m_bar->show();
- else
- m_bar->hide();
-
- m_bar->setText( tr("Editing record %1 out of %2",
- "Shows the current edited record out of an array of records").arg( record ). arg( count ) );
-}
diff --git a/libopie/big-screen/omodalhelper.h b/libopie/big-screen/omodalhelper.h
deleted file mode 100644
index 78a2ac9..0000000
--- a/libopie/big-screen/omodalhelper.h
+++ b/dev/null
@@ -1,708 +0,0 @@
-/*
-               =. This file is part of the OPIE Project
-             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
-           .>+-=
- _;:,     .>    :=|. This library is free software; you can
-.> <`_,   >  .   <= redistribute it and/or modify it under
-:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
-.="- .-=="i,     .._ License as published by the Free Software
- - .   .-<_>     .<> Foundation; either version 2 of the License,
-     ._= =}       : or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s. This library is distributed in the hope that
-     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . . without even the implied warranty of
-    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ; Library General Public License for more
-++=   -.     .`     .: details.
- :     =  ...= . :.=-
- -.   .:....=;==+<; You should have received a copy of the GNU
-  -_. . .   )=.  = Library General Public License along with
-    --        :-=` this library; see the file COPYING.LIB.
- If not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef HAZE_OMODAL_HELPER_H
-#define HAZE_OMODAL_HELPER_H
-
-#include <qdialog.h>
-#include <qwidget.h>
-#include <qvaluelist.h>
-#include <qmap.h>
-#include <qvariant.h>
-
-typedef int TransactionID;
-
-class OModalHelperControler;
-class OModalHelperSignal;
-class QDialog;
-
-struct OModalHelperBase {
- virtual void done( int status, TransactionID ) = 0;
- virtual void next( TransactionID ) = 0;
- virtual void prev( TransactionID ) = 0;
-};
-
-/**
- * Modality sucks! ;) But it is easy to work with
- * do exec() on a dialog and you know everything is funky.
- * You only need to have one Dialog loaded and so on.
- * This class helps you to work like with modality and help
- * you to keep things in sync
- * It's a template class but it sends signals once one Item is ready
- * the signals contains the status and id of the item and then you
- * need fetch it.
- * Handled Records will stay available until the first call to retrieve
- * either the record via the TransactionID or via the QValueList<Record>. Note
- * that most functions do not take handled records into account.
- * Also if you edit an record external you can tell this class and it'll
- * call the merge() function of your widget to maybe merge in these changes.
- * It also supports multiple modes. Either it can create new dialogs
- * for each item or it can queue them depending on your usage. But it is
- * so smart that if only one item is shown that the queue bar is not shown
- * See the example for simple usage.
- *
- * @short helps to life without modaility
- * @author hOlgAr
- * @version 0.01
- */
-template<class Dialog, class Record, typename Id = int>
-class OModalHelper : private OModalHelperBase{
- friend class OModalHelperSignal;
- friend class OModalHelperControler;
-public:
- typedef QValueList<Record> RecordList;
- typedef QMap<Id, Record> IdMap;
- typedef QMap<TransactionID, Id> TransactionMap;
- typedef QMap<QDialog*, TransactionID> DialogMap
- enum Mode { Queue, New };
- OModalHelper(enum Mode mode, QObject* parnet );
-
- bool handles( Id id)const;
- TransactionID transactionID( Id id)const;
-
- void suspend( bool = true );
-
- void cancel();
- void cancel( TransactionID );
-
- void connectDone( QObject* rec, const char* slot );
- void connectAccepted( QObject* rec, const char* slot );
- void connectRejected( QObject* rec, const char* slot );
-
- TransactionID handle( Id id, const Record& rec = Record() );
-
- void edited( Id, int what, const QVariant& data );
-
- Record record( TransactionID )const;
- RecordList recordsDone()const;
-private:
- virtual void done( int, TransactionID );
- virtual void next( TransactionID );
- virtual void prev( TransactionID );
-
- Record nextRecord( TransactionID &, int & )const;
- Record prevRecord( TransactionID &, int & )const;
- int pos( TransactionID )const;
- Dialog* newDialogRecord( const Record& );
-
-private:
- OModalHelperDialog *queuedDialog()const; // generate or recycle
- OModalHelperDialog *m_dialog;
- OModalHelperSignal *m_signal; // our signal
- OModalHelperControler *m_controler;
- IdMap m_ids; // maps ids (uids) to a record
- IdMap m_doneIds;
- TransactionMap m_transactions; // activate transactions
- TransactionMap m_done; // done and waiting for getting picked
- DialogMap m_editing; // only used for New Mode
- enum Mode m_mode; // the mode we're in
- bool m_disabled :1;
-};
-
-
-
-/* ### FIXME use namespace with Qt3 */
-
-/*
- * A note on flow. The Signal is used for QT Signals when
- * a record is done.
- * There is either one controler and this controler slot will
- * be connected to a dialog signal.
- * In Queue we get the next and prev signals and call the Helper.
- * this then changes the Record of the dialog and sets the transactionId
- * of the controler.
- * For the new mode
- *
- */
-
-class OModalHelperSignal : public QObject {
- Q_OBJECT
-public:
- OModalHelperSignal(OModalHelperBase* base, QObject* parent);
- ~OModalHelperSignal();
-
-signals:
- done( int status, TransactionID transaction );
- accepted( TransactionID transaction );
- rejected( TransactionID transaction );
-
-private:
- OModalHelperBase* m_base;
-};
-
-
-class OModalHelperControler : public QObject {
- Q_OBJECT
-public:
- OModalHelperControler( OModalHelperBase* , QObject* parent);
- virtual TransactionID transactionID()const;
- void setTransactionID( TransactionID id );
- QDialog* dialog()const;
-
-public slots:
- virtual void done(int result );
- virtual void next();
- virtual void prev();
-private:
- QDialog *m_dia;
- TransactionID m_id;
- OModalHelperBase *m_base;
-}
-
-struct OModalQueueBar;
-class OModalQueuedDialog : public QDialog {
- Q_OBJECT
-public:
- OModalQueuedDialog(QDialog *mainWidget);
- ~OModalQueuedDialog();
-
- QDialog* centerDialog()const;
-
- void setQueueBarEnabled( bool = true );
- void setRecord( int record, int count );
-
-signals:
- void next();
- void prev();
-
-private:
- OModalQueueBar *m_bar;
- QDialog *m_center;
-};
-
-
-/*
- * Tcpp Template Implementation
- */
-
-/**
- * This is the simple Template c'tor. It takes the mode
- * this helper should operate in and the parent object.
- * This helper will be deleted when the parent gets deleted
- * or you delete it yourself.
- *
- * @param mode The mode this dialog should be in
- * @param parent The parent QObject of this helper.
- */
-template<class Dialog, class Record, typename Id>
-OModalHelper<Dialog, Record, Id>::OModalHelper( enum Mode mode, QObject* parent ) {
- m_disabled = false;
- m_mode = mode;
- m_signal = new OModalHelperSignal( this, parent );
- m_controler = new OModalHelperControler( this, m_signal );
-}
-
-
-/**
- * This functions looks for your record and sees if it is
- * handled with this helper. Note that done records
- * will not be returned.
- *
- * @return true if the record is currenlty edited otherwise false
- *
- * @param Id The id which might be handled
- */
-template<class Dialog, class Record, typename Id>
-bool OModalHelper<Dialog, Record, Id>::handles( Id id )const {
- if ( m_transactions.isEmpty() )
- return false;
-
- TransactionMap::ConstIterator it = m_transactions.begin();
- for ( ; it != m_transactions.end(); ++it )
- if ( it.data() == id )
- return true;
-
- return false;
-}
-
-
-/**
- * just like handles( Id ) but returns the TransactionId
- */
-template<class Dialog, class Record, typename Id>
-TransactionID OModalHelper<Dialog, Record, Id>::transactionID( Id id)const {
- if ( m_transactions.isEmpty() || !m_ids.contains( id ) )
- return 0;
-
- TransactionMap::ConstIterator it = m_transactions.begin();
- for ( ; it != m_transactions.end(); ++it )
- if ( it.data() == id )
- return it.key();
-
- return 0;
-}
-
-/**
- * If you're requested to flush your data and you do not want
- * to call cancel with this method you can disable and enabled
- * all dialogs.
- * The state gets saved so if you want to handle a new record the dialog
- * will be disabled as well.
- *
- * @param sus If true setDisabled(TRUE) will be called otherwise FALSE
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::suspend(bool sus) {
- m_disabled = sus;
- if (m_mode == New )
- for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
- it.key()->setDisabled( sus );
- else if (m_dialog )
- queuedDialog()->setDisabled( sus );
-}
-
-/**
- * Cancel will cancel all current operations and clear the list
- * of done operations as well.
- * This also clears all done operations you did not popped
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::cancel() {
- m_ids.clear();
- m_doneIds.clear();
- m_done.clear();
- m_transactions.clear();
-
- /* we also need to remove the QDialogs */
- /* and hide the queue dialog if present */
- if (m_mode == New && !m_editing.isEmpty() ) {
- for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
- delete it.key();
-
- m_editing.clear();
- }else if (m_dialog )
- queuedDialog()->setRecord( 0, 0 );
-
- m_controler->setTransactionID( 0 );
-}
-
-
-/**
- * This cancels editing of the record behind the Transaction Number
- * Note that if editing is already done it will also be removed from this list
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper::cancel( TransactionID tid ) {
- /* wrong tid */
- if (!m_transactions.contains( tid ) && !m_done.contains( tid) )
- return;
-
- if (m_mode == New )
- /* reverse map eek */
- for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
- if ( it.data() == tid ) {
- it.key()->hide();
- delete it.key();
- it = m_editing.remove( it );
- break;
- }
-
- /* now remove from the various maps done and currently editing map*/
- if (m_transactions.contains( tid ) )
- m_ids.remove( m_transactions[tid] );
- if (m_done.contains( tid ) )
- m_doneIds.remove( m_done[tid ] );
- m_done.remove( tid );
- m_transactions.remove( tid );
-
- next( 0 );
-}
-
-/**
- * Connect to the done Signal. SIGNAL( done(int, TransactionID ) )
- * This signal gets emitted whenever a Record was accepted or rejected
- *
- * @param rec The object where the slot belongs to
- * @param slot The slot which should be called. See the needed parameter above
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::connectDone( QObject* rec, const char* slot ) {
- QObject::connect(m_signal, SIGNAL(done(int, TransactionID) ),
- rec, slot );
-}
-
-/**
- * Connect to the accepted Signal. SIGNAL( accepted(TransactionID ) )
- * This signal gets emitted whenever a Record was accepted
- *
- * @param rec The object where the slot belongs to
- * @param slot The slot which should be called. See the needed parameter above
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::connectAccepted( QObject* rec, const char* slot ) {
- QObject::connect(m_signal, SIGNAL(accepted(TransactionID) ),
- rec, slot );
-}
-
-/**
- * Same as the accepted method but this one gets emitted if the dialog
- * got rejected.
- * SIGNAL( rejected(TransactionID) )
- *
- * @param rec The QObject of the slot
- * @param slot The slot make sure the signature is correct
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::connectRejected( QObject* rec, const char* slot ) {
- QObject::connect(m_signal, SIGNAL(rejected(TransactionID) ),
- rec, slot );
-}
-
-/**
- * Tell the helper to handle a record. If the record is currently handled
- * it will be made active.
- * Already handled record which are waiting getting popped are not taken into account
- * Otherwise this helpers make the record editable.
- * The record supplied needs to have a valid copy operator and constructor.
- * In the case where the record is already present the parameter gets discarded.
- * If you want the new record to be taken you need to cancel the Transaction first
- *
- * @param id The Identification of the Record. For PIM it would uid()
- * @param rec The record we want to be edited
- *
- * @returns This functions returns the TransactionId assigned to the record
- *
- */
-template<class Dialog, class Record, typename Id>
-TransactionID OModalHelper<Dialog, Record, Id>::handle( Id id, const Record& rec ) {
- static TransactionID t_id = 0;
- /*
- *this method consists out of two parts divided each into New and Queued Mode.
- * Either we have the dialog already, in this case we need to highlight the widget
- * Or we need to add it.
- */
- TransactionID tid = 0;
- /* we already have the record lets see if it was done or not */
- if ( !(tid = transactionID( id ) ) ) {
- if (m_mode == New ) {
- /* lets find the dialog and show it need to reverse map*/
- for (DialogMap::Iterator it = m_editing.begin(); it != m_editing.end(); ++it )
- if ( it.data() == tid )
- it.key()->show();
- }else if (m_controler->transactionID() != tid ) {
- int po = pos( tid );
- m_controler->setTransactionID( tid );
- static_cast<Dialog*>( queuedDialog()->centerDialog() )->setRecord( m_ids[ m_transactions[tid] ] );
- queuedDialog()->setRecord( po, m_transactions.count() );
- }
- }else {
- tid = ++t_id;
- m_transactions.insert( tid, id );
- m_ids.insert( id, rec );
-
- if (m_mode == New )
- m_editing.insert( newDialogRecord( rec ), tid );
- else{
- m_controler->setTransactionID( tid );
- static_cast<Dialog*>( queuedDialog()->centerDialog() )->setRecord( rec );
- queuedDialog()->setRecord( m_transactions.count(), m_transactions.count() );
- }
- }
- return tid;
-}
-
-/**
- * The goal of this helper is to help you to create non blocking
- * GUIs. In the example of the todolist you can have the edit dialog
- * but still change the priority or completion inline even if you currently
- * edit the record.
- * Your Dialog needs to have a Method setData(int,const QVariant& ) which will be called
- * in these cases.
- * If you edit anything while a record is edited call this function to merge the
- * change in. Note if the record is not handled here we will ignore the request
- *
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::edited( Id id, int what, const QVariant& data ) {
- int tid;
- if (!( tid = transactionID( id ) ) )
- return;
-
- if (m_mode == New ) {
- for (DialogMap::Iterator it= m_editing.begin(); it != m_editing.end(); ++it )
- if ( it.data() == tid )
- it.key()->setData( what, data );
- }else{
- int po = pos( tid );
- Dialog* dia = static_cast<Dialog*>( queuedDialog()->centerDialog() );
- dia->setRecord( m_ids[id] );
- dia->setData( what, data );
- queuedDialog()->setRecord( pos, m_transactions.count() );
- }
-}
-
-/**
- * This functions either returns the unedited record the done record
- * or a new empty Record using Record().
- * If a done record is retrieved all traces are removed inside this class. This
- * is what was called popping a record. This means when you call this function
- * with the same TransactionID an Empty record is retrieved.
- *
- */
-template<class Dialog, class Record, typename Id>
-Record OModalHelper<Dialog, Record, Id>::record( TransactionID tid)const {
- if (m_transactions.contains( tid ) )
- return m_ids[ m_transactions[tid] ];
- else if (m_done.contains( tid ) ) {
- Record rec = m_doneIds[ m_done[ tid] ];
- m_doneIds.remove( m_done[ tid ] );
- m_done.remove( tid );
- return rec;
- }else
- return Record();
-}
-
-/**
- * Returns all done Records and removes all references to them internally. A 2nd call to this will
- * only contain done record that where edited past the point
- */
-template<class Dialog, class Record, typename Id>
-OModalHelper<Dialog,Record,Id>::RecordList OModalHelper<Dialog, Record, Id>::recordsDone()const {
- RecordList list;
-
- for (IdMap::ConstIterator it = m_doneIds.begin(); it != m_doneIds.end(); ++it )
- list.append( it.data() );
-
- /* clean up */
- m_done.clear();
- m_doneIds.clear();
-
- return list;
-}
-
-
-/**
- * @internal
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::done( int status, TransactionID tid) {
-/* If we're in New mode the transaction Id does not count */
- Record rec;
-
- if (m_mode == New ) {
- Dialog *dia = static_cast<Dialog*>( m_controler->dialog() );
- m_controler->setTransactionID( 0 ); // set the internal dialog to 0l again
- tid = m_editing[ dia ];
- m_editing.remove( dia );
- rec = dia->record();
- delete dia;
- }else
- rec = queuedDialog()->record();
-
- Id id = m_transactions[ tid ];
- if (result == QDialog::Accept ) {
- m_doneIds.insert( is, rec );
- m_done.insert( tid, id );
- }
-
- m_transactions.remove( tid );
- m_ids.remove( id );
-
-
- if (status == QDialog::Accept )
- emit m_signal->accepted( tid );
- else
- emit m_signal->rejected( tid );
-
- emit m_signal->done( result, tid );
-
- next( 0 );
-}
-
-/**
- * @internal
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::next( TransactionID tid) {
- if (m_mode == New )
- return;
-
- if (! (m_transactions.count() ) ) {
- m_controler->setTransactionID( 0 );
- queuedDialog()->setRecord( 0, 0 );
- return;
- }
-
- int next;
- Record rec;
-
- /* save the maybe edited record before switching */
- Dialog *dia = static_cast<Dialog*>( queuedDialog()->centerDialog() );
- rec = dia->record();
- m_ids.replace( m_transactions[tid], rec );
-
- rec = nextRecord( tid, next );
- queuedDialog()->setRecord( next, m_transactions.count() );
- dia->setRecord( rec );
-
- m_controler->setTransactionID( tid ); // was changed during the next call
-}
-
-/**
- * @internal
- */
-/*
- * code duplication should create a template fcuntion
- * which takes a pointer to a function ( next, prev ) function
- */
-template<class Dialog, class Record, typename Id>
-void OModalHelper<Dialog, Record, Id>::prev( TransactionID tid ) {
- if (m_mode == New )
- return;
-
- if (! (m_transactions.count()) ) {
- m_controler->setTransactionID( 0 );
- queuedDialog()->setRecord( 0, 0 );
- return;
- }
-
- int prev;
- Record rec;
-
- /* save the maybe edited record before switching */
- Dialog *dia = static_cast<Dialog*>( queuedDialog()->centerDialog() );
- rec = dia->record();
- m_ids.replace( m_transactions[tid], rec );
-
- rec = prevRecord( tid, prev );
- queuedDialog()->setRecord( prev, m_transactions.count() );
- dia->setRecord( rec );
-
- m_controler->setTransactionID( tid ); // was changed during the next call
-}
-
-/**
- * @internal
- */
-template<class Dialog, class Record, typename Id>
-Record OModalHelper<Dialog, Record, Id>::nextRecord( TransactionID &tid, int &po ) {
- /* if tid is == 0 we will take the first one */
- /* pos starts at 1 here */
- /* we know we're only called if there are records */
- Record rec;
- TransactionMap::Iterator it;
- if (!tid ) {
- po = 1;
- TransactionMap::Iterator it = m_transactions.begin();
- }else{
- po = pos( tid );
- /* if it is the last take the first as next */
- if ( po == m_transactions.count() ) {
- po = 1;
- it = m_transactions.begin();
- }else {
- /* we know we're not the last and there is one after us */
- it = m_transactions.find( tid );
- ++it; ++po;
- }
- }
-
- tid = it.key();
- rec = m_ids[ tid ];
- return rec;
-}
-
-/**
- * @internal
- */
-template<class Dialog, class Record, typename Id>
-Record OModalHelper<Dialog, Record, Id>::prevRecord( TransactionID& tid, int& pos ) {
- /* if tid is == 0 we will take the first one */
- /* pos starts at 1 here */
- /* we know we're only called if there are records */
- Record rec;
- TransactionMap::Iterator it;
- if (!tid ) {
- po = 1;
- TransactionMap::Iterator it = m_transactions.begin();
- }else{
- po = pos( tid );
- /* if it is the last take the first as next */
- if ( po == 1 ) {
- po = m_transactions.count();
- it = m_transactions.end();
- --it;
- }else {
- /* we know we're not the first and there is one before us */
- it = m_transactions.find( tid );
- --it; --po;
- }
- }
-
- tid = it.key();
- rec = m_ids[ tid ];
- return rec;
-}
-
-/**
- * @internal
- */
-template<class Dialog, class Record, typename Id>
-int OModalHelper<Dialog, Record, Id>::pos( TransactionID id)const {
- int i = 1;
- for ( TransactionMap::ConstIterator it = m_transactions.begin(); it != m_transactions.end(); ++it, i++ )
- if ( it.key() == id )
- return i;
-
-
- return 0;
-}
-
-/**
- * @internal
- */
-template<class Dialog, class Record, typename Id>
-Dialog* OModalHelper<Dialog, Record, Id>::newDialogRecord( const Record& rec ) {
- Dialog* dia = new Dialog;
- dia->setRecord( rec );
- dia->setDisabled( m_disabled );
-
- QObject::connect(dia, SIGNAL(done(int) ),
- m_controler, SLOT(done(int) ) );
-
- /* FIXME big screen QPEApplication needs fixed*/
- dia->show();
-}
-
-template<class Record, class Dialog, typename Id>
-OModalHelperDialog* OModalHelper<Record, Dialog, Id>::queuedDialog()const{
- if (!m_dialog ) {
- m_dialog = new OModalHelperDialog;
- m_dialog->setEnabled( m_disabled );
-
- QObject::connect(m_dialog, SIGNAL(done(int) ),
- m_controler, SLOT(done(int) ) );
- QObject::connect(m_dialog, SIGNAL(next() ),
- m_controler, SLOT(next() ) );
- QObject::connect(m_dialog, SIGNAL(prev() ),
- m_controler, SLOT(prev() ) );
- }
- return m_dialog;
-}
-
-#endif
diff --git a/libopie/big-screen/osplitter.cpp b/libopie/big-screen/osplitter.cpp
deleted file mode 100644
index 0c9ed6c..0000000
--- a/libopie/big-screen/osplitter.cpp
+++ b/dev/null
@@ -1,583 +0,0 @@
-/*
-               =. This file is part of the OPIE Project
-             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
-           .>+-=
- _;:,     .>    :=|. This library is free software; you can
-.> <`_,   >  .   <= redistribute it and/or modify it under
-:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
-.="- .-=="i,     .._ License as published by the Free Software
- - .   .-<_>     .<> Foundation; either version 2 of the License,
-     ._= =}       : or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s. This library is distributed in the hope that
-     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . . without even the implied warranty of
-    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ; Library General Public License for more
-++=   -.     .`     .: details.
- :     =  ...= . :.=-
- -.   .:....=;==+<; You should have received a copy of the GNU
-  -_. . .   )=.  = Library General Public License along with
-    --        :-=` this library; see the file COPYING.LIB.
- If not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
-*/
-
-#include <qvaluelist.h>
-#include <qvbox.h>
-
-#include <opie/otabwidget.h>
-
-#include "osplitter.h"
-
-
-/**
- *
- * This is the constructor of OSplitter
- * You might want to call setSizeChange to tell
- * OSplitter to change its layout when a specefic
- * mark was crossed. OSplitter sets a default value.
- *
- * You cann add widget with addWidget to the OSplitter.
- * OSplitter supports also grouping of Splitters where they
- * can share one OTabBar in small screen mode. This can be used
- * for email clients like vies but see the example.
- *
- * @param orient The orientation wether to layout horizontal or vertical
- * @param parent The parent of this widget
- * @param name The name passed on to QObject
- * @param fl Additional widgets flags passed to QWidget
- *
- * @short single c'tor of the OSplitter
- */
-OSplitter::OSplitter( Orientation orient, QWidget* parent, const char* name, WFlags fl )
- : QFrame( parent, name, fl )
-{
- m_orient = orient;
- m_hbox = 0;
- m_size_policy = 330;
- setFontPropagation( AllChildren );
- setPalettePropagation( AllChildren );
-
- /* start by default with the tab widget */
- m_tabWidget = 0;
- m_parentTab = 0;
- changeTab();
-
-}
-
-
-/**
- * Destructor destructs this object and cleans up. All child
- * widgets will be deleted
- * @see addWidget
- */
-OSplitter::~OSplitter() {
- qWarning("Deleted Splitter");
- m_splitter.setAutoDelete( true );
- m_splitter.clear();
-
- delete m_hbox;
- delete m_tabWidget;
-}
-
-
-/**
- * Sets the label for the Splitter. This label will be used
- * if a parent splitter is arranged as TabWidget but
- * this splitter is in fullscreen mode. Then a tab with OSplitter::label()
- * and iconName() gets added.
- *
- * @param name The name of the Label
- */
-void OSplitter::setLabel( const QString& name ) {
- m_name = name;
-}
-
-/**
- * @see setLabel but this is for the icon retrieved by Resource
- *
- * @param name The name of the icon in example ( "zoom" )
- */
-void OSplitter::setIconName( const QString& name ) {
- m_icon = name;
-}
-
-
-/**
- * returns the iconName
- * @see setIconName
- */
-QString OSplitter::iconName()const {
- return m_icon;
-}
-
-/**
- * returns the label set with setLabel
- * @see setLabel
- */
-QString OSplitter::label()const {
- return m_name;
-}
-
-/**
- * This function sets the size change policy of the splitter.
- * If this size marked is crossed the splitter will relayout.
- * Note: that depending on the set Orientation it'll either look
- * at the width or height.
- * Note: If you want to from side to side view to tabbed view you need
- * to make sure that the size you supply is not smaller than the minimum
- * size of your added widgets. Note that if you use widgets like QComboBoxes
- * you need to teach them to accept smaller sizes as well @see QWidget::setSizePolicy
- *
- * @param width_height The mark that will be watched. Interpreted depending on the Orientation of the Splitter.
- * @return void
- */
-void OSplitter::setSizeChange( int width_height ) {
- m_size_policy = width_height;
- QSize sz(width(), height() );
- QResizeEvent ev(sz, sz );
- resizeEvent(&ev);
-}
-
-/**
- * This functions allows to add another OSplitter and to share
- * the OTabBar in small screen mode. The ownerships gets transfered.
- * OSplitters are always added after normal widget items
- */
-void OSplitter::addWidget( OSplitter* split ) {
- m_splitter.append( split );
-
- /*
- * set tab widget
- */
- if (m_tabWidget )
- setTabWidget( m_parentTab );
- else{
- Opie::OSplitterContainer con;
- con.widget =split;
- addToBox( con );
- }
-}
-
-/*
- * If in a tab it should be removed
- * and if in a hbox the reparent kills it too
- */
-/**
- * This removes the splitter again. You currently need to call this
- * before you delete or otherwise you can get mem corruption
- * or other weird behaviour.
- * Owner ship gets transfered back to you it's current parent
- * is 0
- */
-void OSplitter::removeWidget( OSplitter* split) {
- split->setTabWidget( 0 );
- split->reparent( 0, 0, QPoint(0, 0) );
-}
-
-/**
- * Adds a widget to the Splitter. The widgets gets inserted
- * at the end of either the Box or TabWidget.
- * Ownership gets transfered and the widgets gets reparented.
- * Note: icon and label is only available on small screensizes
- * if size is smaller than the mark
- * Warning: No null checking of the widget is done. Only on debug
- * a message will be outputtet
- *
- * @param wid The widget which will be added
- * @param icon The icon of the possible Tab
- * @param label The label of the possible Tab
- */
-void OSplitter::addWidget( QWidget* wid, const QString& icon, const QString& label ) {
-#ifdef DEBUG
- if (!wid ) {
- qWarning("Widget is not valid!");
- return;
- }
-#endif
- Opie::OSplitterContainer cont;
- cont.widget = wid;
- cont.icon =icon;
- cont.name = label;
-
- m_container.append( cont );
-
- /*
- *
- */
- if (!m_splitter.isEmpty() && (m_tabWidget || m_parentTab ) )
- setTabWidget( m_parentTab );
- else {
- if (m_hbox )
- addToBox( cont );
- else
- addToTab( cont );
- }
-}
-
-
-/**
- * Removes the widget from the tab widgets if necessary.
- * OSplitter drops ownership of this widget and the widget
- * will be reparented i tto 0.
- * The widget will not be deleted.
- *
- * @param w The widget to be removed
- */
-void OSplitter::removeWidget( QWidget* w) {
- ContainerList::Iterator it;
- for ( it = m_container.begin(); it != m_container.end(); ++it )
- if ( (*it).widget == w )
- break;
-
- if (it == m_container.end() )
- return;
-
-
- /* only tab needs to be removed.. box recognizes it */
- if ( !m_hbox )
- removeFromTab( w );
-
-
- /* Find reparent it and remove it from our list */
-
- w->reparent( 0, 0, QPoint(0, 0));
- it = m_container.remove( it );
-
-}
-
-
-/**
- * This method will give focus to the widget. If in a tabwidget
- * the tabbar will be changed
- *
- * @param w The widget which will be set the current one
- */
-void OSplitter::setCurrentWidget( QWidget* w) {
- if (m_tabWidget )
- m_tabWidget->setCurrentTab( w );
-// else
- // m_hbox->setFocus( w );
-
-}
-
-/**
- * This is an overloaded member function and only differs in the
- * argument it takes.
- * Searches list of widgets for label. It'll pick the first label it finds
- *
- * @param label Label to look for. First match will be taken
- */
-void OSplitter::setCurrentWidget( const QString& label ) {
- ContainerList::Iterator it;
- for (it = m_container.begin(); it != m_container.end(); ++it ) {
- if ( (*it).name == label ) {
- setCurrentWidget( (*it).widget );
- break;
- }
- }
-}
-
-/**
- * This will only work when the TabWidget is active
- * If everything is visible this signal is kindly ignored
- * @see OTabWidget::setCurrentTab(int)
- *
- * @param tab The tab to make current
- */
-void OSplitter::setCurrentWidget( int tab ) {
- if (m_tabWidget )
- m_tabWidget->setCurrentTab( tab );
-}
-
-/**
- * return the currently activated widget if in tab widget mode
- * or null because all widgets are visible
- */
-QWidget* OSplitter::currentWidget() const{
- if (m_tabWidget)
- return m_tabWidget->currentWidget();
- else if (m_parentTab )
- return m_parentTab->currentWidget();
-
- return 0l;
-}
-/* wrong */
-#if 0
-/**
- * @reimplented for internal reasons
- * returns the sizeHint of one of its sub widgets
- */
-QSize OSplitter::sizeHint()const {
- if (m_parentTab )
- return QFrame::sizeHint();
-
- if (m_hbox )
- return m_hbox->sizeHint();
- else
- return m_tabWidget->sizeHint();
-}
-
-QSize OSplitter::minimumSizeHint()const {
- if (m_parentTab )
- return QFrame::minimumSizeHint();
- if (m_hbox)
- return m_hbox->sizeHint();
- else
- return m_tabWidget->sizeHint();
-}
-#endif
-
-/**
- * @reimplemented for internal reasons
- */
-void OSplitter::resizeEvent( QResizeEvent* res ) {
- QFrame::resizeEvent( res );
- /*
- *
- */
-// qWarning("Old size was width = %d height = %d", res->oldSize().width(), res->oldSize().height() );
- bool mode = true;
- qWarning("New size is width = %d height = %d %s", res->size().width(), res->size().height(), name() );
- if ( res->size().width() > m_size_policy &&
- m_orient == Horizontal ) {
- changeHBox();
- mode = false;
- }else if ( (res->size().width() <= m_size_policy &&
- m_orient == Horizontal ) ||
- (res->size().height() <= m_size_policy &&
- m_orient == Vertical ) ) {
- changeTab();
- }else if ( res->size().height() > m_size_policy &&
- m_orient == Vertical ) {
- qWarning("Changng to vbox %s", name() );
- changeVBox();
- mode = false;
- }
-
- emit sizeChanged(mode, m_orient );
-}
-
-/*
- * Adds a container to a tab either the parent tab
- * or our own
- */
-void OSplitter::addToTab( const Opie::OSplitterContainer& con ) {
- QWidget *wid = con.widget;
-// not needed widgetstack will reparent as well wid.reparent(m_tabWidget, wid->getWFlags(), QPoint(0, 0) );
- if (m_parentTab )
- m_parentTab->addTab( wid, con.icon, con.name );
- else
- m_tabWidget->addTab( wid, con.icon, con.name );
-}
-
-
-/*
- * adds a container to the box
- */
-void OSplitter::addToBox( const Opie::OSplitterContainer& con ) {
- QWidget* wid = con.widget;
- wid->reparent(m_hbox, 0, QPoint(0, 0) );
-}
-
-
-/*
- * Removes a widget from the tab
- */
-void OSplitter::removeFromTab( QWidget* wid ) {
- if (m_parentTab )
- m_parentTab->removePage( wid );
- else
- m_tabWidget->removePage( wid );
-}
-
-/*
- * switches over to a OTabWidget layout
- * it is recursive
- */
-void OSplitter::changeTab() {
- /* if we're the owner of the tab widget */
- if (m_tabWidget ) {
- raise();
- show();
- m_tabWidget->setGeometry( frameRect() );
- return;
- }
-
- qWarning(" New Tab Widget %s", name() );
- /*
- * and add all widgets this will reparent them
- * delete m_hbox set it to 0
- *
- */
- OTabWidget *tab;
- if ( m_parentTab ) {
- hide();
- tab = m_parentTab;
- /* expensive but needed cause we're called from setTabWidget and resizeEvent*/
- if (!m_container.isEmpty() ) {
- ContainerList::Iterator it = m_container.begin();
- for (; it != m_container.end(); ++it )
- m_parentTab->removePage( (*it).widget );
- }
- }else
- tab = m_tabWidget = new OTabWidget( this );
-
- connect(tab, SIGNAL(currentChanged(QWidget*) ),
- this, SIGNAL(currentChanged(QWidget*) ) );
-
- for ( ContainerList::Iterator it = m_container.begin(); it != m_container.end(); ++it ) {
- qWarning("Widget is %s", (*it).name.latin1() );
- addToTab( (*it) );
- }
-
- for ( OSplitter* split = m_splitter.first(); split; split = m_splitter.next() ) {
- split->reparent(this, 0, QPoint(0, 0) );
- split->setTabWidget( tab );
- }
-
-
- delete m_hbox;
- m_hbox = 0;
- if (!m_tabWidget )
- return;
-
- m_tabWidget->setGeometry( frameRect() );
- m_tabWidget->show();
-
-}
-
-/*
- * changes over to a box
- * this is recursive as well
- */
-void OSplitter::changeHBox() {
- if (m_hbox ) {
- m_hbox->setGeometry( frameRect() );
- return;
- }
-
- qWarning("new HBox %s", name() );
- m_hbox = new QHBox( this );
- commonChangeBox();
-}
-
-void OSplitter::changeVBox() {
- if (m_hbox ) {
- m_hbox->setGeometry( frameRect() );
- return;
- }
-
- qWarning("New VBOX %s", name() );
- m_hbox = new QVBox( this );
-
- commonChangeBox();
-
-}
-
-/*
- * common box code
- * first remove and add children
- * the other splitters
- * it is recursive as well due the call to setTabWidget
- */
-void OSplitter::commonChangeBox() {
- qWarning(" Name of Splitters is %s", name() );
-
- for (ContainerList::Iterator it = m_container.begin(); it != m_container.end(); ++it ) {
- /* only if parent tab.. m_tabWidgets gets deleted and would do that as well */
- if (m_parentTab )
- removeFromTab( (*it).widget );
- qWarning("Adding to box %s", (*it).name.latin1() );
- addToBox( (*it) );
- }
- for ( OSplitter* split = m_splitter.first(); split; split = m_splitter.next() ) {
- /* tell them the world had changed */
- split->setTabWidget( 0 );
- Opie::OSplitterContainer con;
- con.widget = split;
-// con.widget = split->m_tabWidget ? static_cast<QWidget*>(split->m_tabWidget)
-// : static_cast<QWidget*>(split->m_hbox);
- addToBox( con );
- }
-
-
-
- if (m_parentTab )
- m_parentTab->addTab(m_hbox, iconName(), label() );
- else {
- qWarning(" setting Box geometry for %s", name() );
- m_hbox->setGeometry( frameRect() );
- m_hbox->show();
- delete m_tabWidget;
- m_tabWidget = 0;
- show(); // also show this widget
- }
-}
-
-/*
- * sets the tabwidget, removes tabs, and relayouts the widget
- */
-void OSplitter::setTabWidget( OTabWidget* wid) {
- /* clean up cause m_parentTab will not be available for us */
- if ( m_parentTab ) {
- if (m_hbox )
- m_parentTab->removePage( m_hbox );
- else if (!m_container.isEmpty() ){
- ContainerList::Iterator it = m_container.begin();
- for ( ; it != m_container.end(); ++it )
- m_parentTab->removePage( (*it).widget );
- }
- }
- /* the parent Splitter changed so either make us indepent or dep */
-
- m_parentTab = wid;
-
- QWidget *tab = m_tabWidget;
- QWidget *box = m_hbox;
- m_hbox = 0; m_tabWidget = 0;
-
- if ( layoutMode() )
- changeTab();
- else if (m_orient == Horizontal )
- changeHBox();
- else
- changeVBox();
-
- /* our own crap is added and children from change* */
- delete tab;
- delete box;
-}
-
-
-#if 0
-void OSplitter::reparentAll() {
- if (m_container.isEmpty() )
- return;
-
- ContainerList::Iterator it = m_container.begin();
- for ( ; it != m_container.end(); ++it )
- (*it).wid->reparent(0, 0, QPoint(0, 0) );
-
-
-}
-#endif
-
-/**
- * @internal
- */
-bool OSplitter::layoutMode()const {
- if ( size().width() > m_size_policy &&
- m_orient == Horizontal ) {
- return false;
- }else if ( size().height() > m_size_policy &&
- m_orient == Vertical ) {
- return false;
- }
-
- return true;
-}
diff --git a/libopie/big-screen/osplitter.h b/libopie/big-screen/osplitter.h
deleted file mode 100644
index 61a247b..0000000
--- a/libopie/big-screen/osplitter.h
+++ b/dev/null
@@ -1,146 +0,0 @@
-/*
-               =. This file is part of the OPIE Project
-             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
-           .>+-=
- _;:,     .>    :=|. This library is free software; you can
-.> <`_,   >  .   <= redistribute it and/or modify it under
-:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
-.="- .-=="i,     .._ License as published by the Free Software
- - .   .-<_>     .<> Foundation; either version 2 of the License,
-     ._= =}       : or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s. This library is distributed in the hope that
-     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . . without even the implied warranty of
-    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ; Library General Public License for more
-++=   -.     .`     .: details.
- :     =  ...= . :.=-
- -.   .:....=;==+<; You should have received a copy of the GNU
-  -_. . .   )=.  = Library General Public License along with
-    --        :-=` this library; see the file COPYING.LIB.
- If not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef OPIE_SPLITTER_H
-#define OPIE_SPLITTER_H
-
-#include <qstring.h>
-
-#include <qframe.h>
-#include <qvaluelist.h>
-#include <qlist.h>
-
-#include "obigscreen_p.h"
-
-/* forward declarations */
-class OTabWidget;
-class QHBox;
-//template class QValueList<Opie::OSplitterContainer>;
-
-/*
- * TODO
- * -check API docu
- * -one more example
- * -allow inserting at a position
- */
-
-/**
- *
- * If you've widgets that could be placed side by side but you think
- * on small resolutions is not enough place but it would really make sense
- * on bigger resolutions this class will help you.
- * You can add as many widgets you want to it. Set a poliy on which width/height it
- * should switch the layout.
- * You can either say to place widgets vertical or horizontal.
- * This class uses QHBox, QVBox and QTAbWidget internally.
- * OSplitter takes ownership of the widgets
- *
- * @since 1.2
- *
- * @short a small dynamically changing its layout to store two or more widgets side by side
- * @version 0.1
- * @author zecke
- */
-class OSplitter : public QFrame{
- Q_OBJECT
-public:
- typedef QValueList<Opie::OSplitterContainer> ContainerList;
- OSplitter( Qt::Orientation = Horizontal, QWidget *parent = 0,
- const char* name = 0, WFlags fl = 0 );
- ~OSplitter();
-
- void setLabel( const QString& name );
- void setIconName( const QString& name );
- QString label()const;
- QString iconName()const;
-
- void setSizeChange( int width_height );
-
- void addWidget( OSplitter* splitter );
- void addWidget( QWidget* wid, const QString& icon, const QString& label );
- void removeWidget( QWidget* );
- void removeWidget( OSplitter* );
-
- void setCurrentWidget( QWidget* );
- void setCurrentWidget( const QString& label );
- void setCurrentWidget( int );
- QWidget* currentWidget()const;
-
-
-signals:
- /**
- * Emitted if in tab and comes directly from the tab widget
- *
- */
- void currentChanged( QWidget* );
-
- /**
- * emitted whenever a border is crossed
- * true if in small screen mode
- * false if in bigscreen
- * this signal is emitted after the layout switch
- * @param b The layout mode
- * @param ori The orientation
- */
- void sizeChanged( bool b, Orientation ori);
-public:
-// QSize sizeHint()const;
-// QSize minimumSizeHint()const;
-
-protected:
- void resizeEvent( QResizeEvent* );
-
-private:
- /* true if OTabMode */
- bool layoutMode()const;
-// void reparentAll();
- void setTabWidget( OTabWidget*);
- void addToTab( const Opie::OSplitterContainer& );
- void addToBox( const Opie::OSplitterContainer& );
- void removeFromTab( QWidget* );
- void changeTab();
- void changeHBox();
- void changeVBox();
- void commonChangeBox();
- QHBox *m_hbox;
- OTabWidget *m_tabWidget;
- OTabWidget *m_parentTab;
- Orientation m_orient;
- int m_size_policy;
-
- ContainerList m_container;
- QList<OSplitter> m_splitter;
-
- QString m_icon, m_name;
-
- struct Private;
- Private *d;
-};
-
-
-#endif
diff --git a/libopie/big-screen/owidgetstack.cpp b/libopie/big-screen/owidgetstack.cpp
deleted file mode 100644
index 967c54b..0000000
--- a/libopie/big-screen/owidgetstack.cpp
+++ b/dev/null
@@ -1,404 +0,0 @@
-#include <qapplication.h>
-#include <qwidgetstack.h>
-
-#include "owidgetstack.h"
-
-namespace {
- const int mode_size = 330;
-}
-
-/**
- * This is the standard widget. For simple usage see the example. Normally this widget
- * is the central widget of a QMainWindow.
- * Use removeWidget before you delete a widget yourself. OWidgetStack does not
- * yet recognize removal of children.
- *
- * @param parent The parent widget. It maybe 0 but then you need to take care of deletion.
- * Or you use QPEApplication::showMainWidget().
- * @param name Name will be passed on to QObject
- * @param fl Additional window flags passed to QFrame. see @Qt::WFlags
- */
-OWidgetStack::OWidgetStack( QWidget* parent, const char* name, WFlags fl)
- : QFrame( parent, name, fl )
-{
- m_last = m_mWidget = 0;
- m_forced = false;
-
- QApplication::desktop()->installEventFilter( this );
- setFontPropagation ( AllChildren );
- setPalettePropagation( AllChildren );
-
- /* sets m_mode and initializes more */
- /* if you change this call change switchTop as well */
- m_stack = 0;
- switchStack();
-}
-
-/**
- * The destructor. It deletes also all added widgets.
- *
- */
-OWidgetStack::~OWidgetStack() {
- if (m_mode == BigScreen && !m_list.isEmpty() ) {
- QMap<int, QWidget*>::Iterator it = m_list.begin();
- for ( ; it != m_list.end(); ++it )
- delete it.data();
- }
- m_list.clear();
-
-}
-
-/**
- * return the mode of the desktop. There are currently two modes. SmallScreen
- * with a normal PDA resolution and BigScreen with resolutions greater than
- * 330 for width and height.
- * You can also force the mode this widget is in with forceMode()
- * Note that NoForce will be never returned from here
- */
-enum OWidgetStack::Mode OWidgetStack::mode()const {
- return m_mode;
-}
-
-/**
- * You can also force one of the modes and then
- * this widget stops on listening to size changes. You
- * can revert to the scanning behaviour by setting mode
- * to NoForce
- */
-void OWidgetStack::forceMode( enum Mode mode) {
- m_forced = mode != NoForce;
-
- /* we need to see which mode we're in */
- if (!m_forced ) {
- if ( QApplication::desktop()->width() >=
- mode_size )
- mode = BigScreen;
- else
- mode = SmallScreen;
- }
- switch( mode ) {
- case NoForce:
- case SmallScreen:
- switchStack();
- break;
- case BigScreen:
- switchTop();
- break;
-
- }
-
- m_mode = mode;
-}
-
-/**
- * Adds a widget to the stack. The first widget added is considered
- * to be the mainwindow. This is important because if Opie is in
- * BigScreen mode the sizeHint of the MainWindow will be returned.
- * In Small Screen the sizeHint of the QWidgetStack is returned.
- * See QWidgetStack::sizeHint.
- * This widget takes ownership of the widget and may even reparent.
- * All windows will be hidden
- *
- * @param wid The QWidget to be added
- * @param id An ID for the Widget. If the ID is duplicated the
- last set widget will be related to the id
- *
- */
-void OWidgetStack::addWidget( QWidget* wid, int id) {
- if (!wid)
- return;
-
- /* set our main widget */
- if (!m_mWidget)
- m_mWidget = wid;
-
- m_list.insert( id, wid );
-
- /**
- * adding does not raise any widget
- * But for our mainwidget we prepare
- * the right position with the right parent
- */
- if (m_mode == SmallScreen )
- m_stack->addWidget( wid,id );
- else if ( m_mWidget == wid ) {
- wid->reparent(this, 0, contentsRect().topLeft() );
- wid->hide();
- }else {
- wid->reparent(0, WType_TopLevel, QPoint(10, 10) );
- wid->hide();
- }
-}
-
-
-/**
- * Remove the widget from the stack it'll be reparented to 0
- * and ownership is dropped. You need to delete it.
- * If the removed widget was the mainwindow consider
- * to call setMainWindow.
- *
- * @param wid The QWidget to be removed
- */
-void OWidgetStack::removeWidget( QWidget* wid) {
- if (!wid)
- return;
-
- if (m_mode == SmallScreen )
- m_stack->removeWidget( wid );
-
-
- wid->reparent(0, 0, QPoint(0, 0) );
- m_list.remove( id(wid) );
-
- if ( wid == m_mWidget )
- m_mWidget = 0;
-}
-
-#if 0
-/**
- * @internal_resons
- */
-QSizeHint OWidgetStack::sizeHint()const {
-
-}
-
-/**
- * @internal_reasons
- */
-QSizeHint OWidgetStack::minimumSizeHint()const {
-
-}
-#endif
-
-/**
- * This function tries to find the widget with the id.
- * You supplied a possible id in addWIdget. Note that not
- * QWidget::winId() is used.
- *
- * @param id The id to search for
- *
- * @return The widget or null
- * @see addWidget
- */
-QWidget* OWidgetStack::widget( int id) const {
- return m_list[id];
-}
-
-/**
- * Tries to find the assigned id for the widget
- * or returns -1 if no widget could be found
- * @param wid The widget to look for
- */
-int OWidgetStack::id( QWidget* wid)const{
- if (m_list.isEmpty() )
- return -1;
-
- QMap<int, QWidget*>::ConstIterator it = m_list.begin();
- for ( ; it != m_list.end(); ++it )
- if ( it.data() == wid )
- break;
-
- /* if not at the end return the key */
- return it == m_list.end() ? -1 : it.key();
-}
-
-
-/**
- * This function returns the currently visible
- * widget. In BigScreen mode the mainwindow
- * is returned
- */
-QWidget* OWidgetStack::visibleWidget()const {
- if (m_mode == SmallScreen )
- return m_stack->visibleWidget();
- else
- return m_mWidget;
-
-}
-
-/**
- * This method raises the widget wit the specefic id.
- * Note that in BigScreen mode the widget is made visible
- * but the other ( previous) visible widget(s) will not
- * be made invisible. If you need this use hideWidget().
- *
- * @param id Raise the widget with id
- */
-void OWidgetStack::raiseWidget( int id) {
- return raiseWidget( widget( id ) );
-}
-
-/**
- * This is an overloaded function and only differs in its parameters.
- * @see raiseWidget( int )
- */
-void OWidgetStack::raiseWidget( QWidget* wid) {
- m_last = wid;
- if (m_mode == SmallScreen )
- m_stack->raiseWidget( wid );
- else {
- int ide;
- emit aboutToShow( wid );
- /* if someone is connected and the widget is actually available */
- if ( receivers( SIGNAL(aboutToShow(int) ) ) &&
- ( (ide = id( wid ) ) != -1 ) )
- emit aboutToShow( ide );
-
- /* ### FIXME PLACE THE WIDGET right */
- wid->show();
- }
-}
-
-/**
- * This will hide the currently visible widget
- * and raise the widget specified by the parameter.
- * Note that this method does not use visibleWIdget but remembers
- * the last raisedWidget
- */
-void OWidgetStack::hideWidget( int id) {
- /* hiding our main widget wouldn't be smart */
- if ( m_mode == BigScreen && m_last != m_mWidget )
- m_last->hide();
- raiseWidget( id );
-}
-
-/**
- * This is overloaded and only differs in the parameters
- * it takes.
- */
-void OWidgetStack::hideWidget( QWidget* wid) {
- /* still not smart */
- if ( m_mode == BigScreen && m_last != m_mWidget )
- m_last->hide();
-
- raiseWidget( wid );
-}
-
-
-bool OWidgetStack::eventFilter( QObject* obj, QEvent* e) {
- qWarning(" %s %s", obj->name(), obj->className() );
- if ( e->type() == QEvent::Resize ) {
- QResizeEvent *res = static_cast<QResizeEvent*>( e );
- QSize size = res->size();
- if ( size.width() >= mode_size )
- switchTop();
- else
- switchStack();
- }
- return false;
-}
-
-
-/**
- * @internal_resons
- */
-void OWidgetStack::resizeEvent( QResizeEvent* ev ) {
- QFrame::resizeEvent( ev );
- if (m_mode == SmallScreen )
- m_stack->setGeometry( frameRect() );
- else
- if (m_mWidget )
- m_mWidget->setGeometry( frameRect() );
-
-}
-
-/**
- * setMainWindow gives the OWidgetStack a hint which
- * window should always stay inside the stack.
- * Normally the first added widget is considered to be
- * the mainwindow but you can change this with this
- * function.
- * If in BigScreen mode the current mainwindow will be reparented
- * and hidden. The position will be taken by the new one.
- * If the old MainWindow was hidden the new window will
- * also be hidden. If the window was visible the new mainwindow
- * will be made visible too and the old one hidden. If there
- * was no mainwindow it will be hidden as well.
- *
- * @param wid The new mainwindow
- */
-void OWidgetStack::setMainWindow( QWidget* wid ) {
- if (m_mode == BigScreen ) {
- bool wasVisible = false;
- if (m_mWidget ) {
- wasVisible = !m_mWidget->isHidden();
- /* hidden by default */
- m_mWidget->reparent(0, WType_TopLevel, QPoint(10, 10) );
- }
- wid->reparent(this, 0, frameRect().topLeft() );
-
- if (wasVisible)
- wid->show();
- }
-
- m_mWidget = wid;
-}
-
-/**
- * this is an overloaded member and only differs
- * in the type of arguments.
- * @see setMainWindow(QWidget*)
- */
-void OWidgetStack::setMainWindow( int id) {
- setMainWindow( widget( id ) );
-}
-
-
-/*
- * this function switches to a stack ;)
- */
-void OWidgetStack::switchStack() {
- if (m_stack ) {
- m_stack->setGeometry( frameRect() );
- return;
- }
-
- m_mode = SmallScreen;
- m_stack = new QWidgetStack(this);
-
- connect(m_stack, SIGNAL(aboutToShow(QWidget*) ),
- this, SIGNAL(aboutToShow(QWidget*) ) );
- connect(m_stack, SIGNAL(aboutToShow(int) ),
- this, SIGNAL(aboutToShow(int) ) );
-
- /* now reparent the widgets... luckily QWidgetSatck does most of the work */
- if (m_list.isEmpty() )
- return;
-
- QMap<int, QWidget*>::Iterator it = m_list.begin();
- for ( ; it != m_list.end(); ++it )
- m_stack->addWidget( it.data(), it.key() );
-
-
-}
-
-/*
- * we will switch to top level mode
- * reparent the list of widgets and then delete the stack
- */
-void OWidgetStack::switchTop() {
- m_mode = BigScreen;
- /* this works because it is guaranteed that switchStack was called at least once*/
- if (!m_stack && m_mWidget) {
- m_mWidget->setGeometry( frameRect() );
- return;
- }else if (!m_stack)
- return;
-
- if (!m_list.isEmpty() ) {
- QMap<int, QWidget*>::Iterator it = m_list.begin();
- for ( ; it != m_list.end(); ++it ) {
- /* better than reparenting twice */
- if ( it.data() == m_mWidget ) {
- m_mWidget->reparent(this, 0, frameRect().topLeft() );
- m_mWidget->setGeometry( frameRect() );
- m_mWidget->show();
- }else
- /* ### FIXME we need to place the widget better */
- it.data()->reparent(0, WType_TopLevel, QPoint(10, 10) );
- }
- }
-
- delete m_stack;
- m_stack = 0;
-}
diff --git a/libopie/big-screen/owidgetstack.h b/libopie/big-screen/owidgetstack.h
deleted file mode 100644
index 5179213..0000000
--- a/libopie/big-screen/owidgetstack.h
+++ b/dev/null
@@ -1,127 +0,0 @@
-/*
-               =. This file is part of the OPIE Project
-             .=l. Copyright (c) 2003 hOlgAr <zecke@handhelds.org>
-           .>+-=
- _;:,     .>    :=|. This library is free software; you can
-.> <`_,   >  .   <= redistribute it and/or modify it under
-:`=1 )Y*s>-.--   : the terms of the GNU Library General Public
-.="- .-=="i,     .._ License as published by the Free Software
- - .   .-<_>     .<> Foundation; either version 2 of the License,
-     ._= =}       : or (at your option) any later version.
-    .%`+i>       _;_.
-    .i_,=:_.      -<s. This library is distributed in the hope that
-     +  .  -:.       = it will be useful, but WITHOUT ANY WARRANTY;
-    : ..    .:,     . . . without even the implied warranty of
-    =_        +     =;=|` MERCHANTABILITY or FITNESS FOR A
-  _.=:.       :    :=>`: PARTICULAR PURPOSE. See the GNU
-..}^=.=       =       ; Library General Public License for more
-++=   -.     .`     .: details.
- :     =  ...= . :.=-
- -.   .:....=;==+<; You should have received a copy of the GNU
-  -_. . .   )=.  = Library General Public License along with
-    --        :-=` this library; see the file COPYING.LIB.
- If not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef OPIE_BIG_WIDGET_STACK_H
-#define OPIE_BIG_WIDGET_STACK_H
-
-#include <qframe.h>
-#include <qmap.h>
-
-class QWidgetStack;
-/**
- *
- * OWidgetStack is the answer to the problem of using Opie at different screen
- * sizes and to have a different behaviour. Most applications use a QWidgetStack
- * to supply a view on click. And by clicking the (X) you go back but this
- * behaviour feels strange on bigger screens. It's ok on smaller one because
- * one can't determine the difference.
- * This stack reads the default out of the size of the desktop widget but
- * can be forced to have either the one or the other behaviour.
- * The first widget added is considered the 'main' widget and its
- * sizeHint will be taking if in BigScreen mode.
- * In small screen mode this widget behaves exactly like a QWidgetStack and in BigScreen
- * mode it'll use the MainWindow as child of this widget and arranges the others as
- * hidden top level widgets.
- *
- * @version 0.1
- * @author hOlgAr F.
- * @short Either a true stack or a list of top Level widgets
- */
-class OWidgetStack : public QFrame {
- Q_OBJECT
-public:
- enum Mode { SmallScreen, BigScreen, NoForce };
- OWidgetStack( QWidget* parent, const char* name = 0, WFlags fl = 0 );
- ~OWidgetStack();
-
- enum Mode mode()const;
- void forceMode( enum Mode );
-
- void addWidget( QWidget* , int );
- void removeWidget( QWidget* );
-
-// QSizeHint sizeHint()const;
-// QSizeHint minimumSizeHint()const;
-
- QWidget *widget( int )const;
- int id( QWidget* )const;
-
-
-
- QWidget* visibleWidget() const;
-
- bool eventFilter( QObject*, QEvent* );
-signals:
- /**
- * OWidgetStack monitors the Desktop Widget for
- * size changes if it recignizes a change size it'll
- * send a signal and adjust its mode. After the signal
- * was emitted. During the signal a call to mode() the
- * old mode will be returned. Note that if a size change happens
- * but no modeChange no signal will be emitted
- *
- *
- * @param mode The new mode of the desktop
- */
- void modeChanged( enum Mode mode);
-
- /**
- * These two signals are emitted whenever we're about to
- * show one of the widgets
- */
- void aboutToShow( QWidget* );
- void aboutToShow( int );
-
-public slots:
- void raiseWidget( int );
- void raiseWidget( QWidget* );
- void hideWidget( int );
- void hideWidget( QWidget* );
- void setMainWindow( QWidget* );
- void setMainWindow( int );
-
-protected:
- void resizeEvent( QResizeEvent* );
-
-private:
- void switchStack();
- void switchTop();
- QMap<int, QWidget*> m_list;
- QWidgetStack *m_stack;
- QWidget *m_mWidget;
- QWidget *m_last;
-
- enum Mode m_mode;
- bool m_forced : 1;
-
- struct Private;
- Private *d;
-};
-
-
-#endif
diff --git a/libopie/libopie.pro b/libopie/libopie.pro
index a3d01ab..145743d 100644
--- a/libopie/libopie.pro
+++ b/libopie/libopie.pro
@@ -109,6 +109,5 @@ SOURCES += pim/otodoaccesssql.cpp pim/ocontactaccessbackend_sql.cpp pim/odateboo
INTERFACES = otimepickerbase.ui orecurrancebase.ui
TARGET = opie
-include ( big-screen/big-screen.pro )
include ( $(OPIEDIR)/include.pro )